Used Airpress Aps 10 X Combidry for sale (78,009)

Condition: new, Year of construction: 2025, functionality: fully functional, power: 7.5 kW (10.20 HP), volume flow: 576 m³/h, pressure (max.): 10 bar, noise level: 63 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, New Airpress screw compressors 7.5 kW / 10 HP Capacity 960 liters per minute Direct drive With dryer On 500-liter tank Made in the EU 2-year warranty Available from stock Dkjdpfexq Rmmox Aa Het

Condition: used, Year of construction: 2023, turning diameter 380 mm turning length 1000 mm control Mazatrol SmoothG max. swing diameter over bed 695 mm Standard machining diameter 276 mm Dsdpfx Aaezzd Rto Hjkt bar material dia. max. 80 mm x-axis 234 mm rapid traverse X-axis 30 m/min y-axis 100 mm rapid traverse Y-axis 21 m/min z-axis 1090 mm rapid traverse Z-axis 33 m/min w-axis 1050 mm rapid travel W 30 m/min turning speeds 35 - 4000 U/min spindle nose A2-8 spindle bore 91 mm Motor output (30-min. rating) 26/22 Max. Torque 465 (15% ED) Nm turning speeds 35 - 6000 U/min spindle nose A2-5 Motor output (25%ED) 11 Max. Torque 90 (15% ED) Nm Milling spindle speeds ( driven tools) 5000 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40% ED) kW Milling spindle power 3,7 kW Numbers of tools 12 (angetrieben) Tool cross section (outside) 25 qmm Boring bar- Ø 40 mm Drill- Ø 20 mm Mill- Ø 20 mm Tap- Ø M20 x 2,5 coolant tank 270 l Chuck diameter main spindle 10 '' Chuck diameter counter spindle 8 '' total power requirement 37 kW weight of the machine ca. 6,6 t dimensions of the machine ca. 3,6 x 2 x 1,9 m Machine in standard configuration, equipped with the following optional equipment: Air blast through the turret Automatic operator door – opening and closing Air blast system at the main spindle chuck Chip conveyor High-pressure coolant system, 15 bar Robot interface (ADVANCE / Ethernet/IP) C-axis on the sub-spindle, input resolution (contour/indexing): 0.0001° Additional push buttons on the CNC control panel Sub-spindle tailstock function Rectangular 3-colour LED signal light Preparation for oil mist extraction, mechanical flange only, Ø 98 mm Absolent 10C oil mist extraction system Preparation for bar feeder Overload monitoring system Drilling cycle with torque-dependent chip breaking Engraving function Thread re-cutting function All dimensions, weight and performance specifications are non-binding. Used machine – sold without warranty.

Condition: used, 10’-0” x 84” HARDINGE CONICAL BALL MILLS MILL SPECIFICATION Model : 10’-0” x 84” HCBM Overall Dimensions : 3050 mm diameter x 5185 mm long. Installed Power : 400 kW Absorbed Power : 320 kW Mill Speed : 20 rpm Lining : Chrome Iron Cast Liner Plates Media : Steel Balls (30 tonne required) Drive : Girth Gear and Pinion, Gearbox and Slip Ring Motor Trunnion Bearings : No.1 Mill - Cooper Split Roller Bearings No.2 Mill – White Metal Bearings Dsdpszvgdlefx Aa Hekt The mills were operated by British Chrome & Chemicals Ltd (later Elementis Chromium), at their site in Cleveland, UK, processing Chrome Ore to a fineness of 99% passing 45 µm. The first mill, with the white metal bearings, was installed in around 1970. The second mill, with the Cooper Split Roller Bearings was installed in 1980. This mill is offered with a new set of Cooper Trunnion Bearings. Both mills were in operation until the site closed in 2009 and have been in storage ever since. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: good (used), Year of construction: 1982, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Main drive motor: 30 kW Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 Dsdpfezzlzaox Aa Hokt - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Condition: used, functionality: fully functional, APS-10 Automatic tea bag packing machine fully functional equipment available. The equipment is designed for automatic packaging of bulk materials, for example black teas, fruit teas, etc. DEVICE CONSTRUCTION The main components of the sachet machine are: Unwinder for double packaging material Guide roller system Sample wheels for welding Cutting system Cross cutting system Bundling system (10, 20, 30, 50-100 each) Volume feeder Double belt conveyor PACKAGING MATERIAL Thermal sealing filter paper: 16g/m² Width: 490 mm Dimension max: 500 mm Core D: 76mm TECHNICAL AND OPERATIONAL DATA Overall dimensions (W x L x H): 1500mm x 1600mm x 2100 mm Tea bag size 48 x 65 mm Dodpfxoyn Ibke Aa Hjkt Capacity: from 500 to 1000pcs/minute depending on the material. Working lanes: 10 rows Dosage: 1g to 2g Direct operation: one person. Sachet collection depending on the operating speed of the device: from 2 to 3 people Power supply: electric: 3 x 380V50Hz Electricity demand: 5kVA Pneumatic: 6 bar Air consumption: approx. 0.3m3/h

Condition: new, Airpress Aps 5,5KW oil compressor NEW COMPLETE. Screw compressor APS 7.5 Combi Dry X 10 bar 7.5 HP/5.5 kW 690 l/min 200 l machine NEW Weight (kg): 310.00 Length, Width, Height (cm): 140 x 60 x 143 Percentage ratio of work to rest per man-hour: 100/0 Engine power (hp / kW): 7.5 hp / 5.5 kW Dkedpfx Aaoq D Dcgs Hot Motor energy class: IE2 Motor type: AC Drive: 1:1 direct drive Dryer: 230 V / 50 Hz / 1 Ph Compressed air tank: Yes Air tank capacity (l): 200 Output capacity (l/min): 690 Maximum pressure (bar): 10 Maximum effective capacity (l/min): 690 Maximum effective capacity (m³/h): 41.4 Output capacity (m3/h): 41.4 Sound level dB(A): 63 Sound level dB(A) (4 m): 43 Plug type: EU Refrigerant: Air Main air connection ("): 3/4 Internal Direct air connection ("): - Oil-free: No Number of compression stages: 1 Starting: Y-∆ Power supply: 400 V / 50 Hz / 3 Ph Radiator: No Variable speed (IVR): No net price: 15500 zł gross price: 19065 zł

Year of construction: 2006, condition: good (used), Airpress screw compressor with dryer Bar: 10 Tank: 200 L Djdpfxei Eq D De Aa Hekt Year: 2006

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: ITJ758486, overall weight: 263 kg, volume flow: 60 m³/h, pressure (max.): 10 bar, Equipment: type plate available, We offer: AIRPRESS APS 9 500 SN: ITJ758486 YEAR: 2023 CAPACITY: (kW) 7.5 OUTPUT: (m3min) 1 CIS: (bar) 10 INVERTER: no BUILT-IN DEHUMIDIFIER: no EXCHANGER: no Dkjdpfxev N U Dqj Aa Hst COOLED: (AIR) air ON THE TANK: yes 500 L DOCUMENTS: yes NEW S014163

Condition: excellent (used), Year of construction: 2018, overall weight: 433 kg, volume flow: 3.93 m³/h, operating pressure: 10 bar, input voltage: 400 V, pressure: 10 bar, Screw compressor AIRPRESS APS 35 Engine 26 kw Capacity 3,93 m3/min Dksdjqbt Anepfx Aa Het Pressure 10 bar Year of production 2018 Mileage 8734 mtg Compressor fully operational, after service, filter and oil change.

Condition: used, Year of construction: 2019, operating hours: 12,000 h, functionality: fully functional, feed length X-axis: 24,000 mm, feed length Y-axis: 450 mm, feed length Z-axis: 1,000 mm, feed rate X-axis: 400 m/min, feed rate Y-axis: 400 m/min, feed rate Z-axis: 400 m/min, total length: 28,000 mm, drilling capacity: 40 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, type of input current: three-phase, control cabinet width: 1,620 mm, control cabinet length: 450 mm, total height: 3,400 mm, total width: 2,600 mm, control cabinet height: 2,200 mm, overall weight: 11,200 kg, workpiece weight (max.): 8,000 kg, positioning accuracy: 1 mm, spindle speed (min.): 200 rpm, rotational speed (max.): 4,000 rpm, spindle speed (max.): 4,000 rpm, rotational speed (min.): 200 rpm, travel distance X-axis: 600 mm, table width: 1,000 mm, drill diameter: 40 mm, compressed air connection: 8 bar, roll diameter: 108 mm, table length: 1,000 mm, table height: 710 mm, power: 21 kW (28.55 HP), Equipment: rotational speed infinitely variable, Complete automatic drill-saw street for profiles APS Europe Profile steel drilling machine RDR-1036 and Band saw RS-1300 Increase your productivity with this complete automatic drill-saw street for profiles. Designed to work efficiently and accurately with different profile steel materials. Price does not include disassembly, assembly, transportation and import duties. Djdpfjtnf Iysx Aa Hskt Please contact us for more information about this machine.

Condition: excellent (used), Technical data: Max. cutting width: 3100 mm Max. cutting capacity (steel ST45): 0.4 - 10 mm Motorized adjustable backgauge: 1000 mm NC control: OPERATOR Stroke: 160 mm Motor power: 15 kW CE marking Dimensions (L x W x H): approx. 3900 x 2200 x 2250 mm Weight: approx. 9 tons Dkodpfx Aaeyxvgqe Hjt The seller accepts no liability for typographical or data transmission errors. The machine's visual condition, technical functionality, and wear are consistent with its age; used machines are sold without any warranty.

Condition: like new (used), Year of construction: 2021, load capacity: 1,000 kg, lifting height: 5,350 mm, construction height: 2,900 mm, operating hours: 498 h, fuel type: electric, mast type: duplex, Manufacturer + model: STILL EK-X 10 Mast: 2W5350 ID: 26092.2114 Category: Demo Mast: 2W Lowered height: 2900 mm Dkjdpfszv Rryex Aa Hot Lifting height: 5350 mm Capacity: 1000 kg Platform height: 4750 mm Initial inspection: Yes Cabin width: 1200 mm Year: 2021 Hours: 498 hours Capacity: 24V / 620Ah Options: FULL options!! - DUAL steering!!!! - Special SAFETY gates!! - Adjustable forks! - 2 x Blue spot Complete, LIKE NEW!!

Condition: used, Year of construction: 2013, General technical data: Machine type: Flexographic printing press Djdpfeyplyasx Aa Hokt Web width: 530 mm Number of colors: 10 Equipment & Configuration: • 1-side tape cleaner • 1-side corona treatment • Turning bar • Delam/Relam unit – 1 color • Cold foil unit – 1 • Die-cut station – 1 • Master gap unit – 1 • Rewind shaft – 1 • 10 UV GEW lamps • 3 sets of sleeves • 10 anilox rollers • 3 magnetic cylinders

Condition: excellent (used), Year of construction: 2007, AMADA MODEL HFT 103 100 tons capacity x 3000 bending length hydraulic downstroking press brake complete with CD 2000 4 AXIS colour graphic cnc control, FEISSLER machine mounted electronic laser guards , side and rear interlocked fencing Model Amada HFT 100/3 downstroke CNC Press brake Year 2007 Tonnage 100 KN Type CD 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 3000 mm Open height 470 mm Stroke Length 350 mm Dksdpfszbql Sjx Aa Hst Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Motor Power 7.5kw Weight 7300 kg Bed Length 3000 mm Bed Width 180 mm Throat Depth 420 mm CNC Control 12000 hours BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Year of construction: 1999, condition: like new (used), functionality: fully functional, Manufacturer: Arthur Klink Year of construction: 1999 Type: horizontal broaching machine Model: RIW 10x1600x400 Weight: 2.700 KG General / technical data: horizontal hydraulic internal broaching machine in mint condition with tool holding system ideal for the use of flat broaching tools. Broaching stroke: 1.600mm Tractive force: 10,000 kg (100kN) Mounting in the drawbridge: Ø 85mm Cylindrical Through-hole in the clamping table: Ø 100mm Workpiece diameter: max. 400mm (due to the machine body of the tool trough) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Space requirement of the machine: (w x d x h) approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400Volt 50 HZ Connected load: 9kw Equipment: - the machine has an electric control for the clearing stroke movement with manual operation and automatic sequence - the machine has an integrated coolant system - the machine has a tool holding system for flat broaching tools (no feed) - The broaching carriage with the pulling head holder is equipped with a flat guide on both sides Accessories - 1 universal pulling head for flat shanks from 3mm to max. 25mm wide and a maximum pulling force of 10kN (10,000kg) - Complete machine documentation and CE declaration of conformity Dodpfxsr A Hcbj Aa Hokt Remarks: The machine is ideal for the production of keyways. Due to the connection with the stable machine bed of the machine and the broaching tool holding system, the machine is particularly suitable for quick and easy use of flat broaching tools. The machine has been used very little and is in mint condition. The machine is available for inspection in our warehouse and is ready for demonstration under power. Our direct contact details and further information about the machine can be found in the attached PDF document

Condition: like new (used), Year of construction: 1988, 🛠️ 4-Axis CNC Portal Milling Machine WALDRICH COBURG Type 17 – 10 FP A powerful 4-axis CNC portal milling machine from WALDRICH COBURG is offered for sale, ideally suited for machining large and heavy workpieces. The machine impresses with its robust construction, high performance, and extensive equipment. It also offers excellent potential for modernization / CNC retrofit tailored to customer requirements. ⚠️ Important Note The machine is offered without electrical equipment and without CNC control and is therefore perfectly suited as a retrofit project. ⚙️ Highlights ✅ 4-axis CNC portal milling machine with adjustable cross rail ✅ Powerful main drive: 75 kW ✅ Speed range up to 2,000 rpm with high torque ✅ Automatic pallet changer (3 pallets) ✅ Hydrostatic guideways in X & Y axes ✅ Through-spindle coolant system ✅ Ideal for heavy-duty machining & large components 📊 Technical Data 🔹 Distance between columns: 3,100 mm 🔹 Pallet clamping surface: 2,750 x 4,000 mm (extendable) 🔹 Number of pallets: 3 (automatic) 🔹 Max. workpiece weight per pallet: 40 t 🔹 X-axis travel: 5,000 mm 🔹 Y-axis travel: 5,440 mm 🔹 Z-axis travel: 1,000 mm 🔹 W-axis travel (cross rail): 2,500 mm 🔹 Spindle power: 75 kW Dkodpfxodu Hg Hj Aa Hst 🧰 Equipment ✔️ Automatic pallet changer (3 stations) ✔️ Angle heads (RAA) incl. ISO 60 & ISO 50 ✔️ Special angle head ✔️ Spindle extension (650 mm) ✔️ Automatic head changing system 📍 Location Germany 👁️ Inspection Inspection possible at any time by appointment 📦 Availability Available at short notice 📩 Contact Contact us now for further information, photos, or a customized offer!

Condition: ready for operation (used), Year of construction: 1998, overall weight: 2,900 kg, power: 8 kW (10.88 HP), input voltage: 380 V, number of broaching positions: 1, total width: 6,100 mm, total height: 1,900 mm, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1959 / 1998 Weight: 2,900 kg Machine No.: 1194 General Information / Technical Data: Hydraulic internal broaching machine in operational condition Broaching stroke: 1,420 mm Tensile force: 10,000 kg Diameter of drawhead mount in the draw bridge: 85 mm Broaching tool clamping: universal drawhead for flat shanks up to 25 mm width Through-hole in the clamping table: Ø 100 mm Workpiece diameter: max. approx. 360 mm (limited by the machine body of the tool feeder) Cutting speed: hydraulically infinitely variable from 1 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 4,100 (6,100) mm x 800 mm x 1,900 mm (excluding work area) Power supply / connected load: 380 Volt 50 Hz / 8.0 kW Accessories / Special Features: • The machine is equipped with manual-hydraulic control for the broaching stroke movement • The machine has an integrated coolant/lubricant system • The machine features a basic oil drip tray fitted to the machine bed, without tool feeder Dsdpfx Aasxtcz Is Hskt Remarks: The machine is ideal for the production of keyways and profiles. Broaching needles, arbors, and drawheads can be supplied on request.

Condition: good (used), functionality: fully functional, Year of construction: 1997, working width: 3,000 mm, sheet thickness (max.): 10 mm, Guillotine shear from manufacturer F. LLI Vimercati, model 3000 x 10 Dsdpfjym Uuuex Aa Hskt

Condition: used, Year of construction: 2022, hydraulic CNC bending machine - order machine (delivery time approx. 10-14 weeks), incl. hydraulically dynamic camber, touchscreen, pressure regulation of the upper beam, backgauge (1000mm), goat feet with automatic tool clamping, electric/hydraulic adjustment of the bending beam -images similar- Dksdpfxjd Nxn Nj Aa Het

Condition: like new (used), Year of construction: 2020, load capacity: 1,000 kg, lifting height: 4,350 mm, construction height: 2,480 mm, operating hours: 413 h, fuel type: electric, mast type: duplex, Manufacturer & model: STILL EK-X 10 Mast: 2W4350 ID: 26031.4366 Category: Demo unit Mast: 2W Forks: 1200 mm Lowered height: 2480 mm Lifting height: 4350 mm Capacity: 1000 kg Dkedpfx Aszv Rzuoa Hot Platform height: 3750 mm Order picking height: 5350 mm Initial lift: Yes Cabin width: 900 mm Year: 2020 Operating hours: 413 h Battery capacity: 24v / 620Ah Options: Chassis width = 980 mm!! 2 x BlueSpot Condition: Like new!!

Condition: excellent (used), Year of construction: 2001, overall weight: 800 kg, volume flow: 6 m³/h, operating pressure: 10 bar, input voltage: 400 V, pressure: 10 bar, Screw compressor AIRPRESS APS 60 Engine 45 kw Capacity 6.00 m3/min Pressure 10 bar Mileage 15207 mtg Dksdpev Sk I Djfx Aa Hot The compressor is fully functional.

Condition: used, Year of construction: 2015, Technical details: table length: 3000 mm table width: 1500 mm burner heads: 1 X-axis : 3000 mm y-axis: 1500 mm z-axis: 150 mm max. plate thickness : 20 mm weight of the machine ca.: 10 t 1 used CNC laser cutting system PRIMA POWER PLATINO FIBER Switching hours as of June 2024: 65,043 h Incl. - FIBERLASER power source IPG YLS4000 incl. chiller - Incl. STIMA automatic loading and unloading device for raw material and processed sheets for 2D laser machines Compat Server (compact tower) Dkedezlic Nepfx Aa Hst Manufacturer description: The Platino Fiber laser cutting machine is a result of the perfect balance of innovation and experience. This product combines state-of-the-art efficient and ecological fiber laser technology with the proven reliability and flexibility of the Platino platform. The Platino Fiber can be used to cut a variety of materials. Fiber lasers are more effective than other laser sources at cutting highly reflective materials (e.g. aluminum alloys, copper, brass). The Platino Fiber cuts various thicknesses, up to 20 mm of mild steel, with efficiency and quality. The productivity increases are particularly noticeable with thin to medium-sized sheets. Compact servers: is a loading and unloading device for handling blanks and processed sheets. Compact Server consists of two storage units - one for blanks and one for processed sheets. All components of the Compact Server are located above the automatic pallet changer and therefore require no additional floor space. The advantages of these solutions are: reliability, compactness and easy management of loading/unloading operations. The newest product from SPR Italy is a highly sophisticated automation system that combines many innovative solutions that are subject to SPR patents. The system is capable of unmanned operation and provides storage, loading and unloading within the smallest footprint possible. The tower is built above the shuttle table and the loading and unloading is done with the elevator that can be installed on either side of the tower. Simple operation and state of the art PLC contribute to a friendly integration and provide real productivity gain. The system is so compact that it became the top selling automation product, with many hundred of them sold world wide in just few years since it was launched. Compact Tower CT 1530 is capable to store a maximum of 54 ton of raw sheets dim. 1500x3000mm stacked in18 locations, with 80mm each stack, and to load raw sheets onto the machine table and unload processed sheets thereafter. For this example we will use a 18 pallet tower such as we already installed in Melbourne this year. The scope of the work includes the software implementation, the tests of the units at SPR factory, shipment, documentation and supervision during installation, start-up and commissioning Concrete foundation to the engineering specifications, civil works, mains electrical supply, permits and the base plates must be supplied by Customer. Major components The Compact Tower is composed with following main units: - tower to store the stack of sheet - elevator to move the pallet on which the stack of sheet is laid - table with fixed pins where the operator load the stack of sheet - gripper with suction cups - light barriers - electric cabinet with control panel - set of safety fences General features: Sheet format max. 3.100×1.570mm Max weight 3.000Kg per stack Max height stack

Condition: used, Year of construction: 1983, Hydraulic Shear HACO HS 3010 Capacity: 3000 x 10 mm Back gear gauge travel: 1000 mm Dksdozwcncjpfx Aa Het Year of construction: 1983 Manual adjustment of the clearance between blades Cutting angle: 1° to 3° Voltage: 380 V Dimensions (L x W x H): 4000 x 2100 x 2200 mm Weight: approx 8 T

Condition: used, Year of construction: 2015, Technical details: table length: 3000 mm table width: 1500 mm burner heads: 1 X-axis : 3000 mm y-axis: 1500 mm z-axis: 150 mm max. plate thickness : 20 mm weight of the machine ca.: 10 t 1 used CNC laser cutting system PRIMA POWER PLATINO FIBER Switching hours as of June 2024: 65,043 h Incl. - FIBERLASER power source IPG YLS4000 incl. chiller - Incl. STIMA automatic loading and unloading device for raw material and processed sheets for 2D laser machines Compat Server (compact tower) Manufacturer description: The Platino Fiber laser cutting machine is a result of the perfect balance of innovation and experience. This product combines state-of-the-art efficient and ecological fiber laser technology with the proven reliability and flexibility of the Platino platform. The Platino Fiber can be used to cut a variety of materials. Fiber lasers are more effective than other laser sources at cutting highly reflective materials (e.g. aluminum alloys, copper, brass). The Platino Fiber cuts various thicknesses, up to 20 mm of mild steel, with efficiency and quality. The productivity increases are particularly noticeable with thin to medium-sized sheets. Compact servers: is a loading and unloading device for handling blanks and processed sheets. Compact Server consists of two storage units - one for blanks and one for processed sheets. All components of the Compact Server are located above the automatic pallet changer and therefore require no additional floor space. The advantages of these solutions are: reliability, compactness and easy management of loading/unloading operations. The newest product from SPR Italy is a highly sophisticated automation system that combines many innovative solutions that are subject to SPR patents. The system is capable of unmanned operation and provides storage, loading and unloading within the smallest footprint possible. The tower is built above the shuttle table and the loading and unloading is done with the elevator that can be installed on either side of the tower. Simple operation and state of the art PLC contribute to a friendly integration and provide real productivity gain. The system is so compact that it became the top selling automation product, with many hundred of them sold world wide in just few years since it was launched. Compact Tower CT 1530 is capable to store a maximum of 54 ton of raw sheets dim. 1500x3000mm stacked in18 locations, with 80mm each stack, and to load raw sheets onto the machine table and unload processed sheets thereafter. For this example we will use a 18 pallet tower such as we already installed in Melbourne this year. The scope of the work includes the software implementation, the tests of the units at SPR factory, shipment, documentation and supervision during installation, start-up and commissioning Concrete foundation to the engineering specifications, civil works, mains electrical supply, permits and the base plates must be supplied by Customer. Major components The Compact Tower is composed with following main units: - tower to store the stack of sheet - elevator to move the pallet on which the stack of sheet is laid - table with fixed pins where the operator load the stack of sheet - gripper with suction cups Dsdpfx Aezl D Exea Hokt - light barriers - electric cabinet with control panel - set of safety fences General features: Sheet format max. 3.100×1.570mm Max weight 3.000Kg per stack Max height stack

Condition: like new (used), Year of construction: 2020, load capacity: 1,000 kg, lifting height: 4,350 mm, construction height: 2,480 mm, operating hours: 439 h, fuel type: electric, mast type: duplex, Manufacturer + model: STILL EK-X 10 Mast: 2W4350 ID: 26031.4372 Category: Demo Mast type: 2W Forks: 1200 mm Lowered height: 2480 mm Lifting height: 4350 mm Capacity: 1000 kg Platform height: 3750 mm Order picking height: 5350 mm Initial lift: Yes Cabin width: 900 mm Year: 2020 Operating hours: 439 hours Battery capacity: 24V / 620Ah Dedpjzv Rzzefx Aa Hokt Options: Chassis width = 980 mm!! 2 x Blue spot Completely LIKE new!!