Used Acs Instrument Leak Detection Bench for sale (7,272)

Condition: used, Year of construction: 2019, Manufacturer : ACS Instrument Model: 7400S Year : 2019 Type : Leak test bench / automatic and autonomous leak detector Application: Integrity test for flexible containers (flexible packaging, pouches, envelopes, etc.) EM delta P: +- 5000 Pa Pressure test: -55 hPa to 950 hPa Motor power : 0,75 kW The cup is placed in a sealed enclosure. A vacuum is applied in the enclosure, causing the cup to inflate. The inflated cup is clamped between the two horizontal walls of the enclosure and exerts a force on the internal pressure sensor. The force exerted on this sensor is the image of the internal pressure of the cup. The leak test consists of measuring a variation in the force on the internal pressure sensor between the start and end of the stage. A touch screen for controlling and setting the instrument parameters. Hodpfx Aajx R Dfxegenl A USB key for exporting results. Documentation available

Condition: excellent (used), KSE Leak Test Bench Here we offer a KSE leak test bench. Test bench for automotive Testing of electric drives Isolatio/Tightness E-Motors Supply voltage: 400 VAC Control voltage: 24 VDC Hjdpeiu H Hcofx Aagonl Connected load: 0,75 kW Type: KSE I/SB-3 Condition: used / used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, Helium leak detector Manufacturer: Pfeiffer Type: HLT 260 Condition: Tested and ready for use Connection: 230V Hodpfx Asc S D A Teagenl Delivery time: ex stock (u.ue.V.)

Condition: used, This listing is for the ATi Portsens111 Gas Leak Detector The unit is in full working condition and is ready for immediate use Hnsdpfxsxhfqbj Aagjl The ATI PortaSens III is a portable, handheld gas leak detector designed for locating and measuring gas leaks across a wide range of environments—from chemical plants to pharmaceutical labs, food processing facilities, and confined spaces Key Features & Capabilities Interchangeable Smart Sensors Attaches a variety of pre‑calibrated smart sensor modules, each combining sensor, amplifier, and memory into one. These allow detection of 30 to over 60 different gases, depending on configuration Swapping sensors takes under a minute and requires no user calibration Built-in Sampling Pump & Flexible Wand Enables pinpoint detection of leak sources via one‑hand operation Color Touch-Screen Display Features a backlit, graphic or touch-enabled LCD for easy reading in all lighting conditions Data Logging & Connectivity Includes a 4 GB internal data-logger, capturing millions of data points. Log intervals are programmable from 1 to 60 minutes, with USB connectivity for data transfer Power Options Runs on either rechargeable NiMH “D” cell battery or traditional alkaline D-cell batteries Alarms & Alerts Offers both visual and audible alarms—including low flow and low battery warnings—plus multiple gas concentration thresholds Supported Gases The D16 PortaSens III can detect a broad spectrum of gases, including but not limited to: Toxic gases: Hydrogen sulfide (H₂S), hydrogen peroxide (H₂O₂), formaldehyde, chlorine, sulfur dioxide, ammonia, and others Common industrial gases: Oxygen (O₂), ozone (O₃), carbon monoxide, carbon dioxide Specialty/exotic gases: Arsine (AsH₃), diborane, ethylene oxide, phosphine, silane, bromine, iodine, and more

Condition: used, This listing is for the ATI Porta Sens 11 Gas leak detector The unit is in full working condition and is ready for immediate use Key Specifications (PortaSens II) Sensor Compatibility: Accepts H10 “Smart Sensor” modules for detecting over 30 different gases, including toxic, flammable gases, and oxygen. Range & Accuracy: Accuracy typically within ±5% of the measured value (dependent on sensor). Display: Backlit graphics LCD for clear visibility in varying lighting. Alarms: Three levels of gas concentration alarms, low flow alarm, and low battery alarm. Sampling Modes: Supports both instantaneous and timed sampling. Data Logging: Stores up to 12,000 data points with customizable intervals (1–60 minutes). Hnedpfx Ajxv Dh Isagol Power Supply: D-cell alkaline battery (75 hours) and NiCad rechargeable backup (6 hours). Pump: Internal rotary vane pump (~400 cc/min flow rate). Operating Range: -25°C to 55°C; 0–95% RH (non-condensing) Size & Weight: 3.5″ W x 9″ H x 5.5″ D; ~7 lbs

Condition: used, Adixen / Alcatel Alcatel ASM 122D Helium Leak Detector – mobile For sale is a professional Adixen / Alcatel ASM 122D helium leak detector from industrial use. This device is designed for highly precise leak detection and leak testing with helium and is used in industrial settings, research, and laboratories. It allows for the detection of extremely small leaks in vacuum systems, pipelines, valves, vessels, and assemblies. The leak detector features an integrated forepump and turbomolecular pump, various operating modes (vacuum / sniffer), as well as a digital display with automatic functions. Technical data (excerpt): Manufacturer: ALCATEL Model: ASM 122D Measurement principle: Helium mass spectrometer Detection limit: up to approx. 1 × 10⁻¹² mbar·l/s Power supply: 200–240 V / 50–60 Hz Power consumption: approx. 800–1200 W Made in France Weight: approx. 100 kg Condition: used Scope of delivery: (see picture) Hedpjyapwksfx Aagonl (Specifications and information subject to change and error!) If you have any further questions, please feel free to contact us by phone.

Condition: used, Adixen Adixen ASM 142 Helium Leak Detector Description: For sale is an Adixen ASM 142 helium leak detector. This device is suitable for highly precise leak detection in vacuum and pressurized systems and is used professionally in industry, laboratories, and research. Hnsdoyankiepfx Aagjl The ASM 142 is equipped with an integrated turbomolecular pump, various measurement and test modes, as well as a clear digital display of the leak rate. Thanks to its sniffer mode and automatic test cycles, the device offers flexible application possibilities. Highlights: - Very high measurement accuracy - Vacuum and sniffer operation - Graphical & acoustic leak indication - Robust industrial design on casters Technical Data: Test gas: Helium Dimensions: approx. 110 × 60 × 70 cm Detection limit: down to approx. 5 × 10⁻¹² mbar·l/s Power supply: 230 V / 50–60 Hz Power consumption: approx. 1000 W Weight: approx. 100 kg Condition: used Scope of delivery: (see picture) (Specifications subject to change and possible errors!) For further questions, please feel free to contact us by phone.

Condition: used, Leakage tester/ventilation duct leakage tester Make Airflow UK Type LM 1 Serial number 125674 Hsdpfx Aaocxb Hajgsnl 4 meter hose 230 Volt Documents available

Condition: used, Year of construction: 2018, functionality: fully functional, Helium leak detection device. Hjdpfx Aoyt Sm Usagjnl

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: G-233F | G-203, Used Triotech G-203 Bubble Tester/Leak Detector Set/System Manufacturer: Trio-Tech International G203 Model: Trio-Tech G-233F Filtration system, Trio-Tech G-203 System with several tools, filtration system, stainless steel control unit, several baskets, air pump. Hnodpfsxiwb Usx Aagsl Power: 220 volt. Table not included

Condition: good (used), Bench Foods 32VCUD 32 tray vertical dehydrator Stainless, adjustable temperature range from 15'c to 90'c plus an ambient air mode, timer controls, stainless mesh trays for even drying on both sides, mobile, 1Ph Hjdpfx Aeyziiwsagenl

Year of construction: 2024, operating hours: 1 h, condition: new, functionality: fully functional, machine/vehicle number: 86-731-85552647/18153792542, We are a company based in 9000 St. Gallen (Switzerland) and imported this planetary ball mill from China in 2024. The unit is brand new and unused. We have switched the machine on and let it run empty for a few minutes to verify its functionality. It comes with 4 x 25-liter nylon containers. Additionally, 120 kg of zirconium beads with a 1 mm diameter are available. ~ Manufacturer's Description: The YXQM series of planetary ball mills for mass production is a machine designed for production applications, built to handle medium-scale capacities to meet industrial requirements. It facilitates the smooth transition of materials from laboratory scale to full production, ensuring consistency and repeatability of processes and thus reliable material quality. The equipment is widely used across new energy, metallurgy, electronics, ceramics, geology, mining, construction materials, chemical industry, light industry, cosmetics, environmental protection, and other enterprise-level material production sectors. Extremely high centrifugal forces inherent to planetary ball mills generate intensive grinding energy, resulting in short milling times. These machines are ideal wherever the quality control process demands the highest standards of purity, speed, fineness, and reproducibility. This series can be equipped with vacuum jars, allowing samples to be ground under vacuum conditions. It is well suited for research tasks at scientific institutes, universities, and industrial R&D laboratories to verify the feasibility of scale-up to mass production, as well as for routine operations such as mixing and homogenizing soft, hard, brittle, or fibrous materials—from laboratory tests through to production. - Key Features: - High-performance, nanometer-scale grinding - Digital display, intuitive operation, precise parameter setting - Variable speeds from approx. 10 to 440/360 rpm, speed ratio 1:2 - Batch processing with up to 4×6/9 L samples, simultaneous processing of 4 materials - Electric lid opening and integrated crane for easy and convenient operation - Storage for 3 modes and 15 programs - Power failure protection with memory function and automatic restart - Suitable for dry, wet, vacuum, and protective atmosphere grinding - Machine stops upon lid opening; automatic interlock prevents accidental release - Equipped with rollers and swiveling feet for easy movement and stable operation Applications: Grinding, mixing, homogenizing, colloidal milling, mechanical alloying, mechanochemistry Fields of Application: New energies, geology/metallurgy, glass/ceramics, engineering/electronics, building materials, environment/recycling, agriculture, chemistry, medical, biology Feed material: Soft, hard, brittle, fibrous – dry or wet Size reduction principle: Impact, friction Feed size: < 5 mm soil, < 10 mm Final fineness: For colloidal milling, samples below 0.1 micron Number of grinding stations: 4 Grinding methods: Dry grinding, wet grinding, vacuum grinding, grinding under protective atmosphere Hnedpsyilnzjfx Aagsl

Condition: used, Instrument Systems Instrument Systems LED Testing Laboratory CAS140C, LEDGON 100, Integrating Sphere, Keithley 2611 – Complete System! For sale is a complete, professional LED measurement laboratory from Instrument Systems (Konica-Minolta Group). The system is suitable for precise optical and electrical characterization of LEDs, LED modules, and small luminaires. All devices are from a laboratory environment, manufactured in 2007–2008, featuring high-quality industrial measurement technology. Scope of delivery / Included components - CAS 140C-152 spectrometer (2008) - Integrating sphere ISP250-110 & ISP250-211 (2008) - LEDGON 100 goniophotometer (2007) - CSD315 3-axis controller + emergency stop control panel (2007) - Keithley 2611 SMU / SourceMeter - PC system including software: - SpecWin Pro - SpecWin Light - Goniometer module - Original license CDs - User manual "LED test sockets" - Cables & accessories as per photos Technical features - Measurement of total luminous flux (lumens) - Spectral analysis (color temperature, CRI, chromaticity coordinates xy, spectrum) - Goniophotometric angular measurement - Analysis of radiation characteristics - Electrical control and IV measurements with Keithley 2611 - Fully automated test procedures with SpecWin Pro CAS140C: approx. 36×15×30 cm / 7–9 kg Integrating sphere: approx. 40×40×45 cm / 6–8 kg LEDGON 100: approx. 80×30×28 cm / 12–15 kg CSD315: approx. 42×12×35 cm / 5 kg Keithley SMU: approx. 36×9×28 cm / 5 kg Total dimensions/weight: approx. 40–45 kg Hsdpfjx Da Awjx Aagsnl Important note: "The table shown in the photos is not part of the sale." Condition: used Scope of delivery: (See pictures) (Specifications and technical data subject to change and errors!) For further questions, feel free to contact us by phone.

Condition: ready for operation (used), ACS RCB-200-LB11A1S , serial no. according to photo, used, normal signs of wear, 100% functional, scope of delivery according to photos Hodpfji D Ttljx Aagsnl

Condition: used, SLA5800 Biotech - MFC - Digitally controlled mass flow controller for gas, Mass Flow Controller elastomer-sealed mass flow controller, flow control, flow meter, flow controller, thermal mass flow BROOKS INSTRUMENT Type SLA585081BAB1A2S1 Ser. No. 01C00500222 Year of manufacture 2020 (new / unused in original packaging) SLA5800 Biotech series Option package Biotech Premium Packet Code T Mains connection 13.5 - 27 VDC (plug M8, 5 pin, male) Power consumption max. 10 watts PROFINET interface (2x RJ-45) Visual display 2 LEDs (NET / MOD) Gas connection 6 mm Swagelok Valve design Normally closed User gas O2 (oxygen) Active - Multiple / O2 (oxygen), N2 (nitrogen), CO2 (carbon dioxide), AIR (air) Calibration gas N2 (nitrogen) Hodpfxsuqgbys Aagenl Flow control ranges (full scale) 20000 sccm (20 liters / minute) Maximum inlet pressure 4500 psi (300 bar) Normal operation Pressure differential 60 psig (4 bar) Control range 2% to 100% of full scale (range of mechanism) Typical accuracy from 20 to 100 % ± 0.9 % of set point for 20 to 100 % of full scale Typical accuracy from 2 to 20 % ± 0.18 % of full scale for 2 to 20 % of full scale Repeatability ± 0.2 % of the measured value Resolution 0.1 % of full scale Typical response time of the controller

Condition: excellent (used), Double bench grinder Hodok Iwx Eepfx Aagonl

Condition: used, functionality: unexamined, W.J. Meddings Ltd. Meddings Bench Pillar Drill – Industrial Precision Drilling Machine Heavy-duty industrial bench-mounted pillar drill manufactured by W.J. Meddings Ltd., Slough, England. Renowned for precision engineering and durability, Meddings drills are widely regarded as some of the best British-built workshop drilling machines. This compact industrial drill is ideal for precision drilling, fabrication, toolroom work and engineering applications. Machine Details: Manufacturer: W.J. Meddings Ltd. Country of Manufacture: England Machine Type: Bench Pillar Drill Multi-speed belt-driven spindle Industrial cast iron construction Adjustable work table Single-phase electric motor fitted Features: Heavy-duty industrial build quality Adjustable spindle speed via pulley system Precision drilling head Adjustable table height and positioning Compact workshop footprint Guarded spindle/chuck area Smooth manual feed operation Reliable Meddings engineering design Applications Suitable for: Engineering workshops Fabrication shops Toolrooms Metalworking Maintenance departments Precision drilling operations Small production work General industrial use Condition: Hnedpfx Aoy Shx Ejagel Good used industrial condition with cosmetic signs of workshop use and surface wear consistent with age. complete and operationally intact. Included: Meddings bench drill Adjustable work table Installed motor Chuck assembly Guards and fittings shown in photographs Shipping & Collection Inspection welcome by appointment. Forklift loading available. Pallet delivery can be arranged at buyer’s cost.

Condition: good (used), functionality: fully functional, conveyor belt width: 500 mm, conveyor belt length: 750 mm, 1 x Tekno-Stamap bench-top manual sheeter/laminator, previously used for jam roll polies. Model - LAM 507 B. Hedsy Ralhspfx Aagjnl Belt dimensions (each belt) - 500mm wide x 750mm long.

Condition: used, Year of construction: 2001, total length: 3,300 mm, total width: 800 mm, total height: 3,200 mm, Colour: Grey Empty weight: 1.000 kg Trabo WSB33 Net locking dimensions: 2700*2700mm 6 hydraulic supports in two groups Mobile ladder with guide rail mounted on the bench Dimensions module 980x980 mm Installation angle 70-81° or horizontal Hsdpfswnhldsx Aagenl Diameter holes 25 mm Pitch of the holes 122.5 mm Height stop strip 130 mm - Year: 2001 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 33009012 - Main motor power [kW]: 1.1 - Max. clamping width [mm]: 2700 - Max. clamping depth [mm]: 2690 - Options: Remote control - Transport dimensions: 3300mm x 800mm x 3200mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Colour: Grey Hydraulic Pegboard press Van Duin. Confinement size 4500 * 3000mm 7 cylinders. Transport dimensions: 4500x1300x3510mm (LxBxH), 2000kg. Hsdpfxewnhd Ts Aagsnl - Documentation available: No - CE certificate present: No - Serial number: 1272595 - Max. clamping width [mm]: 4500 - Max. clamping depth [mm]: 3000 - Number of cylinders [pcs]: 7 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Colour: Grey Hydraulic Pegboard press Van Duin. Confinement size 4000 * 2500mm 5 cylinders Transport dimensions: 4550x1300x3030mmm (LxBxH), 2000kg. Hnedpfx Aajwng Htjgel - Documentation available: No - CE certificate present: No - Max. clamping width [mm]: 4000 - Max. clamping height [mm]: 2500 - Number of cylinders [pcs]: 5 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), NOVOTEST Impulse Test Stand / High-Pressure Test Stand Sale from site! Manufacturer: NOVOTEST / BLUM-NOVOTEST GmbH Type: Impulse Test Stand System No.: 00318 Version: High-pressure impulse test stand with hydraulic supply and test cell For sale is a used NOVOTEST impulse test stand suitable for industrial applications, test engineering, hydraulics, research, development, and quality assurance. The system was used for dynamic internal pressure testing of hoses, pipelines, fittings, and containers, and features computer-controlled test sequence management. Technical data: Max. operating pressure: 1,500 bar Test medium: Mineral oil / various testing media possible Frequency: 50 Hz Rated power: 135 kVA Operating voltage: 3 x 500 V PEN Control voltage: 230 V~ / 24 V- Pre-fusing: min. 160 A / max. 200 A Impulse volume at 1,500 bar: max. 140 cm³ Impulse volume at 1,000 bar: max. 210 cm³ Additional pressure stage: max. 340 cm³ Maximum test frequency: 1.7 Hz Test fluid temperature: up to max. 160 °C Temperature control accuracy: ± 3 °C Total weight according to nameplate: approx. 6,000 kg Equipment: - Complete industrial impulse test stand - Enclosed test chamber / test cell - Hydraulic power supply - Specimen supply system - Power section - Test cabinet - Operator cabinet - PC-based control system - Pressure and displacement transducers - Temperature control - Flushing system for test media - Safety monitoring / emergency stop - Technical documentation available Hydraulic power unit: - BOSCH hydraulic power unit - Output: 55 kW - Voltage: 500 V / 50 Hz - Tank volume: approx. 840 l - Max. operating pressure: approx. 280 / 315 bar Suitable for: - Pressure impulse testing - Hydraulic testing - Burst testing - Hose testing - Component testing Condition: Used system with age and usage-related wear. Visual condition as per photos. The unit comes from industrial use. Scope of delivery: - NOVOTEST impulse test stand - Test cell / test chamber - Hydraulic power unit - Control and operator cabinet - PC / monitor / operator unit - Drawer cabinet with accessories - Technical documentation / folders - Scope of delivery as depicted Hsdpfoy Rp R Tox Aagsnl Commercial sale – sale without warranty. Subject to changes and errors.

Condition: good (used), Year of construction: 2009, Control: Heidenhain iTNC 530 Spindle * Diameter: 180 mm * Taper: ISO 50 * Power: 51 kW * Speed: 2,000 rpm (2-speed gearbox) * Torque: 2,668 Nm Hodey R N Ilspfx Aagjnl * Spindle support: 550 mm * Internal high-pressure coolant Travel distances * X: 5,000 mm * Y: 3,500 mm * Z: 2,350 mm * W: 1,000 mm (quill permanently extended 200 mm, at maximum travel – total reach 1,200 mm) Table * Size: 2,000 × 2,500 mm * Load capacity: 28 tons * Hydrostatically supported * B-axis positioning: 0.001° (double pinion, backlash-free) Other features * Tool changer: 60 positions * Siemens axis and spindle motors * Linear scales on all axes + rotary encoder on rotary axis * Handwheel HR 410 * Chip conveyor

Condition: good (used), Drilling machine, bench drill, pillar drill, column drill -Manufacturer: Flott, pillar drilling machine type SB 23/II -Motor: AEG 1.1 kW -Speeds: 200 - 2000 rpm, 6-stage -Table size: 300 x 280 mm, travel distance 420 mm -Spindle mount: MK3 with drill chuck -Spindle stroke: 145 mm -Protrusion: 300 mm -Columns: Ø 110 mm Hodpfxey R Sx To Aagenl -Dimensions: 700/450/H1940 mm -Weight: 295 kg

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 2,050 mm, travel distance Z-axis: 1,500 mm, table load: 8,000 kg, spindle diameter: 110 mm, spindle speed (max.): 3,000 rpm, table length: 1,600 mm, table width: 1,440 mm, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 12,000 m/min, feed rate Z-axis: 12,000 m/min, travel distance W-axis: 500 mm, workpiece weight (max.): 8,000 kg, quill travel distance: 500 mm, quill diameter: 110 mm, overall weight: 25,000 kg, Equipment: rotational speed infinitely variable, FEMCO BMC 110 T2 Boring Mill (T-Type Design) – Available for Quick Delivery Hnedpjxc Hphjfx Aagsl The FEMCO BMC 110 T2 is a classic boring mill designed for heavy-duty and high-precision machining. Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly through JMT ✔ Leasing / financing available ✔ No special foundation required (standard industrial floor is sufficient) ✔ 24-month warranty Technical Specifications: Control System: HEIDENHAIN TNC 7 control system HEIDENHAIN 19" TFT display HEIDENHAIN motors, measuring systems, and HR-510 electronic handwheel Cooling: Internal coolant supply (IKZ) 20 bar Tool Changer: 60-position chain magazine with double gripper Chip Disposal: Dual hinged belt conveyor (front and rear) Enclosure: Fully enclosed perimeter guarding Spindle Support Bearing: Spindle support bearing ø 250 mm Accuracies: Positioning accuracy: ± 0.020 mm Repeatability: ± 0.010 mm Your benefits with JMT: ✔ Official FEMCO distributor in Germany ✔ On-site technical support and service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we are pleased to advise you and provide a tailored quotation