Used Witzenmann Axial Compensator Dn350 for sale (1,414)

Condition: used, This item is unused and in the original packaging We have a quantity available The InPro 3253SG 120/PT1000 is an in-line industrial pH electrode (probe) intended for continuous process measurement rather than simple lab spot checks. It integrates both the pH sensing element and temperature compensation in a single unit, allowing accurate, real-time pH measurement in process lines, tanks, fermenters and reactors Physical & Mechanical - Sensor shaft length: ~120 mm — relatively short, good for installations with limited insertion depth. - Process connection: Pg 13.5 threaded connection. - Connector type: VP industrial connector for secure integration. - Pressure rating: Up to ~4 bar gauge. Temperature & Compensation - Built-in PT1000 temperature sensor — provides temperature compensation for accurate pH reading. - Operating range: ~0 °C to ~100 °C. Sensing & Reference System - Glass pH sensing membrane with a pre-pressurized liquid electrolyte system — lowers maintenance and improves stability. - Ceramic diaphragm — stable reference junction. - Argenthal silver-ion trap cartridge — improves reference performance, especially in environments containing sulfides. - Sterilisation & Hygiene - Sterilisable/autoclavable — built to withstand repeated steam sterilization or autoclave cycles without losing calibration or performance. Podpfx Aoy Iw Etjhlopt Certifications & Approvals - Typically supplied with industrial and safety certifications (e.g., ATEX, IECEx and CE) for use in hazardous zones and hygienic processing. pH Range - Suitable for pH measurement typically within 0 to 12 (depending on membrane type). Summary In essence, the Mettler Toledo InPro 3253/120/PT1000 is a high-performance industrial pH electrode designed for robust, low-maintenance in-line monitoring with integrated temperature compensation, suitable for sterilizable and process‐critical environments. Its pre-pressurized reference and rugged build help deliver stable pH measurements in demanding applications.

Condition: used, This listing is for a Jenway 3540 pH & Conductivity Meter. The unit is in full working condition and is ready for immediate release. The Jenway 3540 is a versatile combined pH and conductivity meter tailored for water testing applications in laboratories. Its compact design and dual functionality make it an excellent choice for efficient analysis of both parameters. Key Features: - Conductivity Measurement Range: Measures conductivity from 0.01 μS/cm to 1.999 S/cm, suitable for various water quality assessments. - pH Measurement Range: Capable of measuring pH levels from 2 to 20.000, accommodating a wide range of samples. - Temperature Measurement Range: Operates within -10.0 to 105.0°C (14 to 221°F), enabling measurements in diverse environmental conditions. - Versatile Measurement Options: Includes salinity and TDS (Total Dissolved Solids) measurement, resistivity, and ORP/Redox measurement via the pH channel. - Ultra-Pure Water Function: Ensures ideal temperature compensation for precise readings in ultra-pure water applications. - Temperature Compensation: Offers both manual and automatic temperature compensation with an adjustable temperature coefficient (0.00 to 10.00 % per °C). - Adjustable Conductivity-to-TDS Factor: Customize the TDS factor from 0.4 to 1.0 for accurate conversions based on specific sample conditions. - User-Friendly Features: Selectable units for temperature (°C/°F), ready indicator, and measurement hold features enhance usability. - Data Management: Store up to 500 data sets with date and time stamps, ensuring comprehensive record-keeping. - Output Options: USB or RS232 output enables easy data transfer to software or printers, facilitating analysis and reporting. - GLP-Compliant Data Storage: Maintains compliance with Good Laboratory Practice (GLP) standards for traceability. - Compact Design: Features a built-in stand and wall-mount option, saving valuable lab space. Applications: - Water Quality Testing:Ideal for testing pH and conductivity in drinking water, wastewater, and industrial applications. - Laboratory Research:Useful in laboratories for environmental monitoring and experimental setups requiring precise pH and conductivity measurements. - Aquaculture and Hydroponics:Supports monitoring water parameters critical to fish farming and soil-less cultivation, ensuring optimal growing conditions. SpecificationsManufacturerJenwayModel3540ConditionUsedSerial Number01298Stock Number29042 Pjdpfxsyk Dwys Ahlspt

Condition: refurbished (used), Year of construction: 2023, operating hours: 50 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, warranty duration: 24 months, pump pressure: 4,000 bar, power: 30 kW (40.79 HP), OMAX OptiMAX 60X TiltaJET, 30 kW EnduroMAX pump, and TiltaJET for absolutely vertical cuts. Completely overhauled with manufacturer certification and a two-year warranty! The waterjet cutting system from the latest OMAX high-end OptiMAX series, featuring a bridge construction, represents the pinnacle of technological feasibility combined with reliability, durability, and maximum load capacity. Low-noise and low-emission operation combined with simple PC-assisted operation for precision at the touch of a button makes this series ideal for use under the harshest operating conditions in industry and trade, from single-shift operation to 24/7 operation. Features: • Closed measuring system • Digital drives • Brushless servo motors • Precision linear guides, surface-hardened • Portal (bridge) driven on both sides • Maintenance-free IntelliTRAX drive • Energy-efficient ultra-high-pressure EnduroMAX pump • Practical water level regulation as standard • Ergonomic control panel on wheels • IntelliMAX Premium control software • Highly accurate 5-axis TiltaJET kinematics • Accuracy up to ± 0.02 mm • Software and machine components based on the latest OMAX technology Pedpjy Umhkofx Ahlopt With the TiltaJET swivel head, the OMAX system achieves a cutting accuracy of up to ± 0.02 mm. The swivel head automatically compensates for the cutting angle error on the cutting edge, regardless of the selected quality and cutting speed. The configuration of the waterjet cutting system can be freely selected. The system can be expanded with extensive accessories according to your cutting requirements. Please contact us and let us know your configuration requirements. Upon request, financing via leasing is possible at very attractive conditions, e.g., up to 86 months. The machine has been completely overhauled; therefore, the images may differ from the offer. A timely delivery can be arranged with INNOMAX AG.

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: HURCO, controller model: MAX5, overall weight: 6,850 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Hurco VMX 42i was manufactured in 2018 and features X, Y, and Z travels of 1067 mm, 610 mm, and 610 mm respectively. It boasts a maximum spindle speed of 12000 rpm. If you are looking to get high-quality milling capabilities consider the Hurco VMX 42i machine we have for sale. Contact us for more information about this machine. • Tool magazine capacity: 30 tools • Spindle hours: approx. 7,800 h • Machine weight: approx. 6,850 kg • Total power requirement: approx. 28 kVA • Internal coolant system Additional equipment • Chip conveyor Software Features Adaptipath: Trochoidal milling for higher removal rates, controlled engagement, and residual material detectionDialog / NC Mix: Allows mixing of Dialog and NC programsNCPP (Industry Standard Software): • ISNC extended NC mode for FANUC compatibility (FANUC 0) • Parameter and MACRO programming • Subprogram technology for NC modeUlti-Motion: • Dynamic Lookahead (up to 10,000 blocks) • Improved surface quality via "Motion Control Technology" Ppodoy Tw R Hopfx Ahlst • Reduced cycle times and machine wearStandard Features: • Simulation graphics • Pocket milling with islands • Synchronous tapping (without compensation chuck) Hardware Components & Accessories • Cooling & Chips: • High-pressure coolant system (Through-Spindle Coolant) at 20 bar (Emulsion type) • Spindle cooler • Standard coolant system with spray gun • Chip conveyor and flushing system for chip removal • Chip splash guard cabin • Tooling: Integrated hydraulic tool clamping system • Workspace: • LED machine light • Signal light for operating status Technical Specification Taper Size SK 40

Condition: used, mileage: 89,990 km, power: 100 kW (135.96 HP), first registration: 08/2021, fuel type: diesel, number of seats: 8, gearing type: automatic, next inspection (TÜV): 05/2028, emission class: euro6, color: white, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, Internal vehicle number: 153385 Location: OsnaTruck Nutzfahrzeugservice GmbH in Osnabrück (ZIP code 49076), Prof.-Porsche-Str. 7 * Tel.: Exterior * Heated and electrically adjustable exterior mirrors * Roof frame mounting points * Tyres: 225/55 R17 * Halogen fog lights * Full wheel covers * Spare wheel with jack Interior * Lockable glove compartment * Adjustable passenger seat * Comfort driver's seat * Driver's seat lumbar support Safety * Adaptive brake lights * Passenger airbag * Thorax-pelvis sidebag passenger * Thorax-pelvis sidebag driver * Window airbags for driver and passenger Comfort and Environment * Attention Assist * Hill-start assist * BlueEFFICIENCY package * ECO start/stop function * Light assistant * Pedestrian protection * Comfort suspension * Leather steering wheel * Mercedes-Benz emergency call system * Multifunction steering wheel with trip computer * Parktronic * Rain sensor * Reversing camera * Lane package * Lane keeping assist * Cruise control Pjdpfx Aheyzwbuelspt * Blind spot assist * Warm air duct to passenger compartment * Auxiliary electric heater Multimedia * Digital radio (DAB) with Bluetooth hands-free function * Instrument cluster (pixel-matrix display) * Live Traffic Information Trim Lines and Packages * Aerodynamics package * Park package Condition/Documents * COC papers Other Features * 2-way speakers in the front * 3-seater bench in 2nd seat row (foldable, roll-up, removable) with ISOFIX and top tether mounts on the outer seats, 2 individual seats in the 3rd seat row * 9G-TRONIC automatic transmission * Active door stop for sliding door * Acoustic package * Towable load up to 3,000 kg possible * Audio 40 system * Brake booster failure compensation * CO2-optimized brake system * Electrical system for trailer socket * Emission class Euro 6d-TEMP * Fixed rear window * Tailgate window with wash/wipe system * Fixed side window in right side panel/sliding door * Fixed side window in left side panel/sliding door * Generator 14 V / 250 A * Speed limit: 210 km/h * Gross vehicle weight variant: 3,200 kg * Seat belt warning system for passenger * TEMPMATIC semi-automatic climate control * Entry handles for driver and passenger * Entry handle * Rear passenger area grab handle * Main tank: 57 liters * Rear view camera non-retractable * HOLD function * Interior lighting in rear passenger area * Interior mirror * High-grade interior trim * Child safety locks on rear passenger doors * Terminal strip for electrical connection * Communication module (LTE) for digital services * TPO plastic flooring in passenger compartment * Steering wheel adjustable for reach and height * Model update * OM 654 DE 20 LA 100 kW (136 hp) at 3,800 rpm * Buffer battery for start process * Wireless tyre pressure monitoring front and rear axles * Labels/printed material in German * Quick release seat fixtures, 2 rows in rear * Heated seat for driver * 'Caluma' fabric, black * Tourer PRO * Surround lighting for tailgate * First aid kit * AGM battery 12 V 92 Ah * Front seats with EASY-ENTRY function * Warning triangle * Warning light for washer fluid level * All-round heat-insulating glass * Registration certificate, part II Miscellaneous: * Nationwide delivery for €299 net plus VAT (355.81 € incl. VAT) * For all transporters: On request, 12 or 24 months Mercedes-Benz used vehicle warranty available. * We are happy to accept your current vehicle as a trade-in an

Condition: used, mileage: 59,950 km, power: 100 kW (135.96 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,200 kg, first registration: 05/2022, next inspection (TÜV): 05/2028, emission class: euro6, color: white, number of seats: 8, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal vehicle number: 153367 Location: OsnaTruck Nutzfahrzeugservice GmbH in Osnabrück (ZIP code 49076), Prof.-Porsche-Str. 7 * Tel.: Exterior * Heated and electrically adjustable exterior mirrors * Mounting points in roof frame * Tires 225/55 R17 * Full wheel covers * Spare wheel with jack Interior * 3-seater bench seat, first row with foldable outer seat * Lockable glove compartment * Adjustable front passenger seat Ppjdpfx Ahsy U Tpnjlst * Passenger compartment seating: 3-seater bench seat, second row * Comfort driver's seat * Driver's seat lumbar support Safety * Adaptive brake lights * Passenger airbag * Thorax-pelvis side airbag, passenger * Thorax-pelvis side airbag, driver * Windowbags for driver and passenger Comfort and Environmental Features * Attention Assist * Hill start assist * BlueEFFICIENCY package * ECO start-stop function * Light assist * Pedestrian protection * Comfort suspension * Mercedes-Benz emergency call system * Multifunction steering wheel with trip computer * Rain sensor * Rear view camera * Cruise control * Warm air duct to passenger compartment * Additional heater, electric Multimedia * Digital radio (DAB) with Bluetooth hands-free system * Instrument cluster (pixel-matrix display) * Live Traffic Information Equipment Lines and Packages * Aerodynamics package Condition/Documents * COC papers Other features * 2-way speakers, front * 9G-TRONIC automatic transmission * Active sliding door stop * Acoustic package * Possible trailer load up to 3,000 KG * Audio 40 * Brake booster failure compensation * CO2-optimized braking system * Digital extra: Remote Services Plus * Wiring for trailer socket * Emissions class Euro 6d-TEMP M/N1 GR. II * Fixed rear windows * Rear tailgate window with wiper and washer * Fixed front right window in side wall/sliding door * Fixed front left window in side wall/sliding door * Generator 14 V / 250 A * Speed limit 210 km/h * Weight variant 3,200 kg * Seat belt warning system for passenger * Semi-automatic climate control TEMPMATIC * Entry grab handles for driver and passenger * Entrance grab handle * Rear compartment grab handle * Non-retractable rear camera * Interior lights in rear compartment * Interior mirror * Premium interior trim * Child safety locks on passenger compartment doors * Terminal strip for electric connection * Communication module (LTE) for digital services * TPO plastic floor in passenger compartment * Height- and tilt-adjustable steering wheel * Model update * OM 654 DE 20 LA 100 kW (136 HP) 3800 rpm * Buffer battery for starting * Tire pressure monitoring system front/rear, wireless * Signs / documentation in German * Rear seat fastenings with quick lock, 2 seat rows * Seat heating for driver * Upholstery: Caluma fabric, black * Tourer PRO * Rear tailgate ambient lighting * First aid kit * AGM battery 12 V 92 Ah * Warning triangle * Washer fluid level warning lamp * All-round heat-insulating glass * Registration certificate, part II Miscellaneous: * Nationwide delivery for 299 € net plus VAT (355.81 € incl. VAT) * For all transporters: upon request, 12 or 24-month Mercedes-Benz used vehicle warranty available. * We are happy to accept your current vehicle in trade, offset it against the new vehicle, or pay the purchase amount to you. * Leasing/financing available through Mercedes-Benz Bank. We would be happy to provide you with an offer. * No liability for typographical or transcripti

Condition: used, mileage: 89,990 km, power: 100 kW (135.96 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,200 kg, first registration: 08/2021, next inspection (TÜV): 05/2028, emission class: euro6, color: white, number of seats: 8, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal vehicle no.: 153385 Location: OsnaTruck Nutzfahrzeugservice GmbH in Osnabrück (ZIP 49076), Prof.-Porsche-Str. 7 * Tel.: Exterior * Heated and electrically adjustable exterior mirrors * Mounting points in roof frame * Tires 225/55 R17 * Halogen fog lamps * Full wheel covers * Spare wheel with jack Interior * Lockable glove compartment * Adjustable passenger seat * Comfort driver's seat * Driver's seat with lumbar support Safety * Adaptive brake light * Passenger airbag * Thorax-pelvis side airbag passenger * Thorax-pelvis side airbag driver * Windowbags for driver and passenger Comfort & Environment * Attention Assist * Hill-start assist * BlueEFFICIENCY package * ECO start-stop function * Headlight assistant * Pedestrian protection * Comfort suspension * Leather steering wheel * Mercedes-Benz emergency call system * Multifunction steering wheel with trip computer * Parktronic * Rain sensor * Reversing camera * Lane package * Lane keeping assist * Cruise control * Blind spot assist * Warm air duct to passenger compartment * Electric auxiliary heater Multimedia * Digital radio (DAB) with Bluetooth hands-free system * Instrument cluster (pixel-matrix display) * Live Traffic Information Equipment lines and packages Podpfx Asyzwbzshljpt * Aerodynamics package * Park package Condition / Documents * COC documents Other * 2-way loudspeakers at the front * 3-seater bench in 2nd row (folding, rolling, removable) with ISOFIX & Top Tether on outer seats, 2 single seats in the 3rd row * 9G-TRONIC automatic * Active door retainer sliding door * Acoustic package * Trailer load up to 3,000 kg possible * Audio 40 * Brake booster failure compensation * CO2-optimized braking system * Prewiring for trailer socket * Emission class Euro 6d-TEMP * Fixed rear windows * Tailgate window with wiper/washer system * Fixed window right front in side wall/sliding door * Fixed window left front in side wall/sliding door * Alternator 14V / 250A * Speed limitation: 210 km/h * Weight variant: 3,200 kg * Seat belt warning device for passenger * Semi-automatic air conditioning TEMPMATIC * Entry grab handles for driver and passenger * Entry grab handle * Rear compartment grab handle * Main tank: 57 liters * Non-retractable rear view camera * HOLD function * Rear compartment interior lighting * Interior mirror * High-spec interior trim * Child safety locks on rear passenger doors * Clamp rail for electrical connection * Communication module (LTE) for digital services * TPO plastic floor in passenger compartment * Steering wheel adjustable for tilt and height * Model facelift * OM 654 DE 20 LA 100 kW (136 hp) 3,800 rpm * Buffer battery for starting * Wireless tire pressure monitoring front and rear axles * Signs / printed materials in German * Rear seat fastenings with quick release 2 seat rows * Heated driver seat * Upholstery: Caluma fabric, black * Tourer PRO * Ambient lighting tailgate * First aid kit * Fleece battery 12V 92Ah * Front seats with EASY-ENTRY function * Warning triangle * Washer fluid level warning lamp * Full privacy glazing * Registration certificate, part II Other: * Nationwide delivery for €299 net plus VAT (€355.81 incl. VAT) * For all vans: Optional 12- or 24-month Mercedes-Benz used vehicle warranty available on request. * We are happy to accept your current vehicle as a trade-in and offset it against the new vehicle.

Condition: used, mileage: 59,950 km, power: 100 kW (135.96 HP), first registration: 05/2022, fuel type: diesel, number of seats: 8, gearing type: automatic, next inspection (TÜV): 05/2028, emission class: euro6, color: white, Year of construction: 2022, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, Internal vehicle number: 153367 Location: OsnaTruck Nutzfahrzeugservice GmbH in Osnabrück (ZIP code 49076), Prof.-Porsche-Str. 7 * Tel.: Exterior * Heated and electrically adjustable exterior mirrors * Mounting points in roof frame * Tires 225/55 R17 * Full wheel covers * Spare wheel with jack Interior * 3-seater bench seat, first row with foldable outer seat * Lockable glove compartment * Adjustable front passenger seat * Passenger compartment seating: 3-seater bench seat, second row * Comfort driver's seat * Driver's seat lumbar support Safety * Adaptive brake lights * Passenger airbag * Thorax-pelvis side airbag, passenger * Thorax-pelvis side airbag, driver * Windowbags for driver and passenger Comfort and Environmental Features * Attention Assist * Hill start assist * BlueEFFICIENCY package * ECO start-stop function * Light assist * Pedestrian protection * Comfort suspension * Mercedes-Benz emergency call system * Multifunction steering wheel with trip computer * Rain sensor * Rear view camera * Cruise control * Warm air duct to passenger compartment * Additional heater, electric Multimedia * Digital radio (DAB) with Bluetooth hands-free system * Instrument cluster (pixel-matrix display) * Live Traffic Information Equipment Lines and Packages * Aerodynamics package Condition/Documents * COC papers Other features * 2-way speakers, front * 9G-TRONIC automatic transmission * Active sliding door stop * Acoustic package * Possible trailer load up to 3,000 KG * Audio 40 * Brake booster failure compensation * CO2-optimized braking system * Digital extra: Remote Services Plus * Wiring for trailer socket * Emissions class Euro 6d-TEMP M/N1 GR. II * Fixed rear windows * Rear tailgate window with wiper and washer * Fixed front right window in side wall/sliding door * Fixed front left window in side wall/sliding door * Generator 14 V / 250 A * Speed limit 210 km/h * Weight variant 3,200 kg * Seat belt warning system for passenger * Semi-automatic climate control TEMPMATIC * Entry grab handles for driver and passenger * Entrance grab handle * Rear compartment grab handle * Non-retractable rear camera * Interior lights in rear compartment * Interior mirror * Premium interior trim * Child safety locks on passenger compartment doors * Terminal strip for electric connection Psdpsy U Tp Ijfx Ahlspt * Communication module (LTE) for digital services * TPO plastic floor in passenger compartment * Height- and tilt-adjustable steering wheel * Model update * OM 654 DE 20 LA 100 kW (136 HP) 3800 rpm * Buffer battery for starting * Tire pressure monitoring system front/rear, wireless * Signs / documentation in German * Rear seat fastenings with quick lock, 2 seat rows * Seat heating for driver * Upholstery: Caluma fabric, black * Tourer PRO * Rear tailgate ambient lighting * First aid kit * AGM battery 12 V 92 Ah * Warning triangle * Washer fluid level warning lamp * All-round heat-insulating glass * Registration certificate, part II Miscellaneous: * Nationwide delivery for 299 € net plus VAT (355.81 € incl. VAT) * For all transporters: upon request, 12 or 24-month Mercedes-Benz used vehicle warranty available. * We are happy to accept your current vehicle in trade, offset it against the new vehicle, or pay the purchase amount to you. * Leasing/financing available through Mercedes-Benz Bank. We would be happy to provide you with an offer. * No liability for typographical or transcripti

Condition: ready for operation (used), Year of construction: 2003, operating hours: 92,000 h, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 5, This 5-axis Index G 200 RATIO LINE was manufactured in 2003. It features a Y-axis travel of 120 mm, a main spindle diameter of D65, and a counter spindle diameter of D60. The machine is equipped with a turret that has 12 stations and driven tools on turret 1 and 2. If you are looking to get high-quality turning and milling capabilities, consider the Index G 200 RATIO LINE turn-mill centre we have for sale. Contact us for further details. • C-axis on main and counter spindle • Thread cutting without compensating chuck • Electronic shaft • Additional V24 RS232 interface in control cabinet • Transmit-/Tracyl function • MDE interface (machine on, machine running, parts counter) • Marposs (Brankamp) collision monitoring CMS100 • 3D machine model for kinematic simulation in CAM programming system • Control cabinet cooling unit • Main spindle D65 • Counter spindle D60 • Coolant flushing of counter spindle (electrically controlled shut-off valve) • Foot switch • Turret (12 stations) bottom and top • Driven tools on turret 1 and 2 • Control function “synchronous tailstock” for turret 2 • Y-axis 120 mm • Automatic sliding door (hydraulic) • Coolant pump 80 l / 8 bar • High-pressure coolant connection slide 1 and 2 with solenoid valve • Coolant flushing gun • Preparation for extraction and filter system connection • Operating hours approx. 92,000 h Additional equipment • Portal unloading device with actuated gripper, NC-controlled • Gripper fingers D4–45 mm and D40–65 mm • Indexed conveyor belt • UNIMAG interface • Chip conveyor (hinged belt), discharge height 1250 mm • Vacuum rotary filter KNOLL (emulsion use) • High-pressure pump 80 bar • Workholding: • Collet chucks for draw tube, HAINBUCH (main and counter spindle) Ppsdpfxeylw Dcj Ahlet • Power chucks D210 with quick jaw change, Schunk (main and counter spindle) • Stop device • Optional: large number of powered tool holders and spare parts warehouse

Condition: refurbished (used), Year of construction: 1985, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 5 rpm, feed length X-axis: 1,200 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 700 mm, feed rate X-axis: 1,000 m/min, feed rate Y-axis: 1,000 m/min, feed rate Z-axis: 1,000 m/min, total width: 4,000 mm, San Rocco Horizontal Boring Machine Fully overhauled San Rocco horizontal boring machine, originating from a high-end aerospace manufacturing facility. The machine is equipped with a Siemens SINUMERIK 840D CNC control system with SIMODRIVE 611 drive technology. The machine is fitted with modern digital drive systems and is designed for high-precision multi-axis machining in continuous operation. It was fully overhauled in 2024, including brand-new telescopic covers on all axes, as well as numerous additional essential refurbishments to the hydraulic system, CNC components, hoses, seals, and related assemblies. Travels X-axis (longitudinal): 1,200 mm Ppjdox Rhlcspfx Ahlet Y-axis (cross): 2,000 mm Z-axis (vertical / spindle axis): 700 mm Spindle Data Boring spindle diameter: 100 mm Tool interface: ISO 50 Milling spindle diameter: 185 mm Spindle axial travel: 700 mm Feeds and Rapid Traverses Automatic feeds (spindle and vertical axis): 2 × 1,000 mm/min Rapid traverse (spindle and vertical axis): 5,500 mm/min Distances Minimum spindle height above table: 0 mm Maximum spindle height above table: 1,500 mm Maximum distance from spindle nose to table center: 1,850 mm Spindle Speeds Torque range: 5 to 14 rpm Continuous power range: 15 to 1,450 rpm Number of gearbox ranges: 4 Speed ranges: 6–51 / 49–160 / 140–460 / 440–1,450 rpm Table Data Rotary table size: 1,100 × 1,300 mm Longitudinal travel: 1,200 mm Cross travel: 2,000 mm Table Feeds Automatic feeds X and Y: 1,000 mm/min Rapid traverse X and Y: 5,500 mm/min Table Rotation Continuous rotation: 30 to 100 degrees per minute Rapid rotation: 5,000 degrees per minute Drive System Siemens SIMODRIVE 611 E/R module 36/47 kW LT modules 108 A and 2 × 25 A Lifting and Transport Data Group 1 Steel bar Ø 70 mm, length 1,600 mm Steel bar Ø 70 mm, length 2,400 mm Four spacer rings for lifting slings Four steel slings Ø 22 mm Weight approx. 12,500 kg Group 2 Two steel slings, minimum Ø 18 mm Weight approx. 3,500 kg Group 3 Manual lifting Weight approx. 1,300 kg Condition The machine is in very good technical condition and can be inspected and tested under power by appointment.

Condition: as good as new (ex-display), Year of construction: 2022, pressing force: 400 t, Press design double column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 4000 kN Free ripping force max. 400 kN Pressure build-up time Closed die steel to steel Max. 4 sec. Dimensions 3,800 mm long and 4,475 mm wide Max. Opening width 800 mm Stroke 800 mm Table height above floor 1100 mm Height above floor (headroom) approx. 4300 mm Hall height min. 5500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of press without operating materials and table plate approx. 28 t Press table Table size 1500x1500 mm Speeds Fast closing with 100 mm sec. Pressing speed 8 - 3 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders/driving cylinders 1 pc. Operating pressure max. 300 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 3 bar Main pump BOSCHREXROTH axial piston pump approx. 145 L/min Oil volume approx. HLP 46 MW 1000 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Auxiliary pump BOSCHREXROTH, gear pump 10 L/min Pressure stabilization for up to 300 sec. Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Connection hydraulics main motor 40 kW Sliding table press with 400 T capacity, Closing speed up to 100 mm/ ( adjustable via touch screen ) Opening speed up to 100 mm/sec ( adjustable via touch screen ) Starting press speed 10 mm/sec ( adjustable via touch screen ) table top size 1500x1500mm ram size approx. 1600x1500mm Oil temperature monitoring 55 degree warning, 60 degree shutdown Automatic lubrication ( adjustable via touch screen ) Free positioning of the ram ( adjustable via touch screen ) SICK/PILZ light barriers 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram protection Circuit oil cooling ( adjustable via touch screen ) Ejector in table, 20 T press force, 350mm travel Ejector moves outwards with the table Ppjdpfoph Uk Nox Ahlet Table plate milled flat, with DIN 22 T grooves Pressure adjustment from 60 T to 400 T ( adjustable via touch screen ) Travel limitation either by pressure or position Set-up mode, single stroke and cycle sequence ( adjustable via touch screen ) Swiveling control panel on the cabinet Two-hand operation, with opening button, manual/single stroke/cycle switchover button Installation, commissioning, instruction against separate charge The control is supplied by SIEMENS. ( S 7 1200 ) Also the touch screen monitor with 9 inch. The remote maintenance unit SECOMEA -Ethernet is included in the delivery. The side of the press has two 1000 mm high and 800 mm wide windows with double doors. (sliding table press, hydraulic press, hydraulic press, double column press)

Condition: used, Year of construction: 2016, machine/vehicle number: 4303, pressing force: 500 t, pressure:500 t passage width:2100 x 1500 mm stroke:1000 mm total power requirement:62 kW weight of the machine ca.:39 t dimensions:5100 x 2800 x 4040 mm return capacity:40 t Main cylinder:2 Stück column diameter:Hauptzylinder 360 mm Table dimensions:2100 x 1500 with T-Nute mm Ram size:2100 x 1500 mm table height over floor:850 mm pre-running speed:300 mm/sec return speed:300 (bei 20T Stößelgewicht) mm/sec Pressure Speed:200T = 28 mm/sec Oil Tank Capacity:ca. 1000 l Auxiliary cylinder:2 Stück column diameter:Hilfszylinder 120 mm Total size Table Tops:ca. 2750 x 1600 mm Total size of plunger plates:ca. 2750 x 1600 mm Pressure Speed:300T = 20 mm/sec Pressure Speed:500T = 6 mm/sec Retract force of the plunger:40 t Tension of the control chain:24 V Podjdyynvjpfx Ahlept voltage:400 V Frequency:50 Hz Axial piston pump (REXROTH/Bosch A4VSO125):290 lt/min Daylight Opening:1500 mm Hydraulic block:REXROTH pressure control:über PLC (Mindestdruck 50T) Cylinder:4 x ?90 x 70 mm stroke length max.:300 über PLC einstellbar mm Outejection speed forward:95 mm/sec. Outejection speed return:240 mm/sec. Capacity:4 x 15T bei 250 bar t Pressure setting:über Monitor von 50-500T t Pressure constant posture:0-900 sec Hydraulics tank:2000 l Siemens Control System:S7 300 Storage capacity:200 Programme Electronics from German manufacturers:SIEMENS/MÖLLER Tax desk:auf Schwenkarm Light sensors sick:1500 auf der Vorderseite mm

Condition: excellent (used), Year of construction: 2008, Opportunity to purchase this outstanding 5-axis HERMLE C30U including an additional tool magazine ZM157. This machine is in good condition with 20093 spindle hours on the counter. Machine can be inspected in operation upon appointment in the Belgium. Availability: 10/2026 Included: Magazine expansion: 157 positions (189 positions in total) Linear axes Standard version NC rotary table: ø280 6-fold rotary feedthrough A-axis position center Y = 300 Ppjdpfsy Tuluox Ahlet IKZ 40-80 bar Scrap belt conveyor Blow-cleaning device Automatic cab door Manual cab roof Polycarbon safety windows Rotating transparent window iTNC electric heat compensation iTNC electronic handwheel BLUM Tool breakage detection A1 Coolant gun CNC control Heidenhain iTNC530 Max. spindle speed 18,000 rpm Spindle taper HSK-A63 DIN 69063 Travel paths X-Y-Z 650- 600- 500 mm Tool Magazine extension 157 positions (189 positions in total) Tool diameter 80 mm Tool diameter with adjacent clearance 125 mm Max. tool length 300 mm Max. tool weight 8 kg Max. magazine load 1256 kg Table plate ø 280 mm Center bore ø 32 H7 Swivel range A-axis = +/- 115° / C-axis = 360° Table load capacity 300 kg Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: new, Cantilever rack, new H: 400cm, base +3 storage levels with roof & rear panel Free delivery within Germany, except islands Data : - H : approx. 400 cm - D : approx. 147 cm - L : approx. 1420 cm - Cantilever arms : approx. 125 cm - Axial dimension: 290 cm (can be adapted to customer requirements) - New goods - made in Germany. - Delivery time approx. 6 weeks after commercial clarification. - 1000 kg load per arm - 4000 kg load per upright Psdjy Uh Sqspfx Ahljpt - Uprights in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are bolted. - Arms adjustable in 200 mm increments. - Levels: Base + 3 storage levels (4 storage levels) Shelf consists of : - 06 x uprights, incl. base approx. 400 cm made of IPE270. - 18 x cantilever arms approx. 125 cm made of IPE 120. - 06 x roof girder approx. 150 cm made of IPE 120, 5° rising roof pitch. - incl. roof and rear wall material. - incl. all necessary connecting elements and screws. Why BLT cantilever racks ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the uprights and cantilever arms are statically verifiable at 100% load. - All shelving systems are supplied in a hot-dip galvanized version. They can therefore be installed both indoors and outdoors and do not rust like painted systems. Consistent appearance for many years. - We use the legally prescribed hot-dip galvanized screw fittings in accordance with DIN EN 15048-1 - Long after-sales guarantee - The upright base and upright back are welded together, providing additional safety and short assembly times because the feet do not have to be bolted to the upright back. - Bracing made of angle steel, so no adjustment with turnbuckles necessary. This shortens the assembly time. - No slotted hole system, therefore no weakening of the upright profile. Price : 12.250,00 € net plus statutory value added tax. You will receive an invoice with VAT shown. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your operating equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2024, functionality: fully functional, carrying capacity per cantilever arm: 140 kg, shelf height: 2,500 mm, total length: 3,150 mm, total height: 2,500 mm, axle spacing: 1,030 mm, load capacity per stand: 1,120 kg, approx. 3.15 running meters Cantilever rack with shelves 60 cm deep H: 250 cm 140 kg/arm META Multistrong Data : - H : approx. 250 cm - D : approx. 81 cm - L : approx. 315 cm - Cantilever arms : approx. 60 cm - Axial dimension : 103 cm - NEW GOODS immediately from stock. - 140 kg load per arm - 1120 kg load per upright - Uprights in RAL5010 (gentian blue). - Cantilever arms in RAL5010 (gentian blue). - Arms are hooked in and secured with locking bolts. - Arms adjustable in 70 mm increments. - Levels: Base + 4 storage levels (5 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 250 cm made of IPE120. - 16 x cantilever arms approx. 60 cm made of rectangular profile 40 x 30 mm. - 12 x META shelf, approx. 100 x 60 cm - incl. all necessary connecting elements and screws. -- Available immediately Price : 1765,00 € net 2100,35 € gross You will receive an invoice with VAT included. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... Pedpfxoy Uh Rme Ahlept We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2024, functionality: fully functional, carrying capacity per cantilever arm: 140 kg, shelf height: 2,500 mm, total length: 3,150 mm, total width: 810 mm, total height: 2,500 mm, axle spacing: 1,030 mm, load capacity per stand: 560 kg, approx. 3.15 running meters. Cantilever shelf H: 250 cm 140 kg/arm META Multistrong Data : - H : approx. 250 cm - D : approx. 81 cm - L : approx. 315 cm - Cantilever arms : approx. 60 cm - Axial dimension : 103 cm - NEW GOODS immediately from stock. - 140 kg load per arm - 1120 kg load per upright - Uprights in RAL5010 (gentian blue). - Cantilever arms in RAL5010 (gentian blue). - Arms are hooked in and secured with locking bolts. - Arms adjustable in 70 mm increments. - Levels: Base + 4 storage levels (5 storage levels) Shelf consists of : Podpfx Aey Uh Rgjhlopt - 04 x uprights, incl. base approx. 250 cm made of IPE120. - 16 x cantilever arms approx. 60 cm made of rectangular profile 40 x 30 mm. - incl. all necessary connecting elements and screws. -- Available immediately Price : 1525,00 € net 1814,75 € gross You will receive an invoice with VAT included. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2020, Cantilever rack NEW Data : - H : approx. 416 cm - D : approx. 137 cm - L : approx. 402 cm - Cantilever arms : approx. 120 cm - Axial dimension : 131 cm - NEW GOODS immediately from stock. - 500 kg load per arm - 2250 kg load per upright - Uprights in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are bolted. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 416 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - incl. all necessary connecting elements and screws. Why BLT cantilever racking ? Podpfx Aey Uh Rashlopt - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the uprights and cantilever arms are statically verifiable at 100% load. - All shelving systems are supplied in a hot-dip galvanized version. They can therefore be installed both indoors and outdoors and do not rust like painted systems. Consistent appearance for many years. - We use the legally prescribed hot-dip galvanized screw fittings in accordance with DIN EN 15048-1 - Long after-sales guarantee - The upright foot and upright back are welded together, providing additional safety and short assembly times, as the feet do not have to be bolted to the upright back. - Bracing made of angle steel, so no adjustment with turnbuckles necessary. This shortens the assembly time. - No slotted hole system, therefore no weakening of the upright profile. Price : 2578,00 € net + statutory value added tax. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: ready for operation (used), Year of construction: 2001, number of axes: 5, This 5-axis TRUMPF TrumaBend V85 press brake was manufactured in 2001. It features an electro-hydraulic ram drive, CNC backgauge system, and a modern protective cover. The machine includes a 4-axis back gauge system and both hydraulic upper and lower tool clamping. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V85 machine we have for sale. Contact us for more information about this machine. Additional equipment Ppjdpex D Nkdsfx Ahlet • Top drive concept in two-cylinder design y1/y2 • Electro-hydraulic ram drive with proportional valve technology • Ram travel measuring system with spring deflection compensation via glass scales • Modern block hydraulics • Cnc backgauge system • Safe finger adjustment from the front • Self-centring, manual, hardened upper tool holder for vertical tool change • Hardened, manual lower tool holder • Programme-controlled lower tool displacement (i-axis) for 2 positions • Modern protective cover Machine Benefits Technical Machine Benefits • Oil cooler • Working width 2. 000mm Extra Information Special Equipment: Back gauge system 4 axes (X, R, Z1, Z2) Hydraulic and hardened upper tool clamping (Wila system) Hydraulic lower tool clamping (Wila system) CNC crowning BendGuard safety device 2 pcs. Support brackets Network No tools included

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Ppedpfxjw Nafko Ahljt Features and technical specifications: Fully equipped in standard version with: - Robust, torsion-free steel frame, welded and bolted construction - Lamella pressure beam TOP with 6 elements, lamella pressure beam SIDE with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly compressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface, height 95 mm, on lower vertical pressure beam - Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir - The pressing process is carried out electromotorically, via 2 independent worm gear motors (2 x 0.75 kW) - Pressing force of the pressure beams is infinitely variable and electronically controlled by 2 potentiometers, regulated via frequency inverter, ensuring absolutely wear-free force control - Pressing force for horizontal pressure beam: min. 500 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning, using 3-stage selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcasses at 45° - Simplest operation via 6 separate push buttons, 8 movement cycles selectable via control panel - Freely adjustable press time preselection 0-30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressure beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Including surcharge for rapid traverse speed, for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special components Including a set of machine feet for 500 mm working height Location: Flörsheim Availability: Short-term

Condition: ready for operation (used), Year of construction: 2023, spindle speed (max.): 4,500 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 560 mm, spindle motor power: 18,500 W, total height: 1,920 mm, total width: 1,560 mm, overall weight: 4,000 kg, controller manufacturer: FANUC, controller model: 0i-TF PLUS, product length (max.): 2,643 mm, number of axes: 3, This 3-axis SMEC SL2000M (B TYPE) was manufactured in 2023. It features a maximum turning diameter over bed of 510 mm and a turning length of 540 mm. The machine is equipped with a hydraulic 3-jaw chuck and a spindle speed of up to 4,500 rpm. If you are looking to get high-quality turning capabilities, consider the SMEC SL2000M (B TYPE) horizontal turning machine we have for sale. Contact us for further details. • Type/Configuration: CNC turning center with C-axis and live tooling; 12-station turret (24 positions); programmable tailstock; no sub-spindle • Capacity: • Max turning diameter over bed: 510 mm • Max turning diameter over/on carriage: 360 mm • Max turning length: 540 mm • Bar capacity: 68 mm • Spindle: • Nose: A2-6" • Hydraulic chuck size: 200 mm • C-axis: continuous • Axes/Travels: • Axis motor power (X/Z): 1.8 / 3.0 kW • Guide inclination: 45° • Rapid traverse and ballscrews: • X rapid: 24 m/min; ballscrew Ø28 mm • Z rapid: 30 m/min; ballscrew Ø40 mm • Turret/Tooling: • Stations: 12 (24 positions) • Interface: BMT55 • Driven tool power: 3.7 / 5.5 kW • Driven tool speed: 5,000 rpm • Indexing time: 0.15 s • External tool size: 25 × 25 mm • Internal tool size: Ø40 mm • Tailstock: • Taper: CM4 • Body travel: 450 mm Psdpsyvqndefx Ahljpt • Quill Ø: 75 mm; travel: 80 mm • Thrust: 5,047 Nm • Coolant system: • Tank capacity: 185 L • Pump power: 0.5 kW • Flow: 20 L/min • Pressure: 5 bar • Electrical: • Power requirement: 31 kVA • Voltage: 380 V ±10%, 3-phase • CNC/Control: • Fanuc 0i-TF PLUS, axes: X, Z, C • Display: 10.4" LCD • Interfaces: USB, Ethernet, RS232 • Functions: rigid tapping Additional equipment • Hydraulic 3-jaw chuck Ø200 mm • Chip conveyor • Tool presetter • Tool holder set: • 2 axial driven tools • 2 radial driven tools • 1 tilting driven tool ER16 • Industry 4.0 package: • CNC data monitoring capability • Remote monitoring via FOCAS libraries • Production data interface • Also included: automatic lubrication system, coolant system, work lamp, electrical cabinet with heat exchanger Technical Specification Counter Spindle No Driven Tools Yes

Condition: good (used), functionality: fully functional, quill stroke: 190 mm, spindle speed (min.): 41 rpm, spindle speed (max.): 1,800 rpm, overall weight: 1,920 kg, workpiece weight (max.): 17 kg, sheet thickness steel (max.): 32 mm, torque: 250 Nm, table height: 900 mm, branded DONAU high speed radial drilling machine type DR 32 - completely overhauled by vaumatec in 2022 - with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain as well as 4 adjustable feet to relieve the table frame) Technical data: Drilling capacity into solid material: St 60/E335 mm Ø 32 (at feed rate 0.20 mm/rev): GG 22 mm Ø 45 Thread cutting: St 60/E355 M26 Thread cutting: GG22 M35 Tool holder: MK4 Column diameter: mm Ø 195 Distance between spindle nose and table: min./max. mm 260/660 Work table height: mm 900 Quill stroke: mm 190 Column stroke: mm 400 Spindle speeds Speed series I : rpm. 41-1800 Feed rates: mm/rev 0.1-0; 15-0; 20-0.3 Torque at the spindle: max. Nm 250 Smooth running of the boom: Radial N 25 Smoothness of the arm: Axial N 25 Clamping effect: Radial Nm 3500 Clamping effect: Axial N 5500 Feed force: N 7500 Max. permissible mass: kg 17 Podpfxsrn Riqe Ahlopt Max. permissible moment of inertia: kgm 0.002176 Workpiece: max. table load: kg 1000 Center of gravity: in the middle of the work surface

Condition: used, Year of construction: 2011, Maximum grinding length: 1200 mm Maximum grinding length with table dresser: 1000 mm Maximum grinding width: 600 mm Grinding height (table to underside of grinding wheel): 550 mm Table load with magnetic chuck: 975 kg Table load without magnetic chuck: 1200 kg Table speed: 1 - 40 m/min Grinding spindle Motor spindle: 11 kW Grinding wheel: 406 x 152.4 x 100 mm Speed: 1400 rpm Longitudinal axis (Z-axis) Rapid traverse: 5 m/min Adjustable feed: 1 - 50 mm Continuously variable feed: 0 - 2000 mm/min Smallest infeed: 0.001 mm Vertical axis (Y-axis) Rapid traverse: 1.5 m/min Smallest infeed: 0.001 mm Space requirements approx.: 4450 x 2935 x 2540 mm Pjdsxhdz Ejpfx Ahlopt Total weight approx.: 6700 kg Equipment: - Electro-permanent magnetic chuck 1000 x 500 mm incl. electronic control module and potentiometer - Coolant cleaning system with paper filter and magnetic separator 350 l – delivery rate 100 l/min - Static frequency converter incl. automatic dressing compensation - Complete extraction system - Siemens control with electronic handwheel - Various accessories, 2 flanges and 5 grinding wheels

Condition: used, Tenoning spindle 1 St. Number of milling agregates 5 St. Spindle diameter 50 mm Weinig Unicontrol 11 Window System with Extensive Tooling ----- Optionally available (at additional cost): - Weinig Univar 6 Rebating Machine (Price upon request!) - Götzinger PowerDrill Drilling and Milling Center for Windows and Doors (Price upon request) Manufacturer's Technical Description: ----- Item 1: Weinig Unicontrol 11 Window System ----- Includes existing tooling sets: Pjdpfxsy T R Tus Ahlept - IV 67 (Wood and Wood-Aluminum) - IV 77 (Wood and Wood-Aluminum) - IV 90 (Wood) Cross-cut Saw ----- With laser alignment light; motor power: 3 kW; spindle diameter: 40 mm; electronically variable spindle speed with brake: 3,000–6,000 rpm. Max. tool cutting circle: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment: pneumatic, to 8 positions for top edge rounding Horizontal Bottom Rounding Unit ----- Motor with brake: 1.5 kW; Spindle diameter: 20 mm; Clamping length: 25 mm Spindle speed: 9,000 rpm Max. tool cutting circle: 130 mm Axial adjustment travel: mechanically coupled with cut-off saw Radial adjustment travel: pneumatically controlled Tenoning and Slotting Spindle ----- With hydraulically clamped outboard bearing Motor power with brake: 15 kW Spindle diameter: 50 mm Spindle speed: 2,800 rpm Max. tool cutting circle: 400 mm Tool clamping length: 640 mm Axial adjustment travel: NC axis Home position below table: 5–10 mm Radial adjustment travel: fixed 1st Profiling Spindle (Climb and Conventional Milling) ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Min. tool cutting circle: 140 mm; Max. tool cutting circle: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position below table: 5–10 mm 2 feed rollers opposite the spindle; axial adjustment pneumatically controlled (8 positions) Horizontal Top Profiling Unit ----- Motor power with brake: 3.7 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 9,000 rpm Max. tool cutting circle: 130 mm Adjustment: pneumatic, to 8 positions (axial and...) radial 2. Profile Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: min. 140 mm, max. 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Indexed guide fence with muntin support strip 2 feed rollers (opposite the spindle); axially pneumatically controlled (8 positions) Vertical Profile Milling Unit (Right-hand side, at machine end) ----- Motor power (with brake): 3.7 kW Spindle diameter: 40 mm Clamping length: 160 mm Spindle speed: 5,850 rpm Tool cutting circle: min. 112 mm, max. 210 mm Adjustment: Pneumatic (8 positions—axial and radial) Horizontal Pro...

Year of construction: 1990, condition: used, spindle taper 2 x SK 40 forward bearing diameter 110 mm milling head speed 100 - 4500 U/min milling drive 5,1 kW workpiece length - max. 830 mm workpiece dia. with double equipment max. 135 mm taper diameter 78 g6 mm centre height 260 mm turning speed range - stepless max. 15 U/min distance of spindles 135 mm spindle nose DIN 55026 Gr. 5 stroke of workpiece slide 810 mm Feed speed max. 6 m/min. surface area 200 x 1750 mm stroke of tool slide 120 mm Feed speed max. 2 m/min. column movement 200 mm tailstock quill stroke 100 mm morse taper 3 MK centre height 260 mm axial distance of the quills 135 mm passage of steadyrest 40 - 80 mm control SIEMENS SINUMERIK 810 weight of the machine ca. 6,5 t Pedpfx Ahjyt Rwrsljpt with SIEMENS-control SINUMERIK 810/820 acc.: NC-dividing unit with back stop, various toolholders, steadies, running centres, coolant

Condition: used, Adjustable traverse, crane traverse, overhead crane, crane hook traverse, load traverse, heavy load traverse, compensating traverse Pjdpfx Ahoy Rtnveljpt -Manufacturer: unknown, compensating beam for transporting different loads -Type: -Loading capacity: approx. 15 t -Transport dimensions: 275/8900/H960 mm -Empty weight: 1780 kg