Used Sorema Optimum for sale (471)

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 31 h, 3D Coordinate CNC measuring device Profitech Innometrik Advanced in gantry design (demo unit at a special price) Open Cable Special features of the gantry design: Gantry design with a low center of gravity, wide bearing separation and optimum stiffness to mass ratio. The granite guideways ensure a uniform thermal, dimensional, torsional and geometric stability of the machine. 24 air bearings for smooth movement of the three axes. High dynamics for better performance, the machine can achieve high accelerations like comparable medium and large CMMs. Thermally compatible materials and components minimize the influence of ambient temperature fluctuations on measurement results, Air filter and regulator. Z-axis pneumatic counterweight system. Granit table with thread inserts of size M10. Passive vibration isolation pads Technical specifications Measurement paths: X: 500mm Y: 600mm Z: 400mm Max workpiece weight: 250kg Weight of the machine: 850kg Dimensions over everything: 1290x1160x2350mm Accuracy according to DIN EN ISO 10360-2 or ISO 10360-4: Volumetric probing deviation: MPEP = 2.2μm Volumetric length measurement deviation: MPEE = 2.2+ L / 350 (μm) Environmental conditions: Room temperature standard: 18-22 ° C Operating temperature 10-35 ° C Hodjdyah Sspfx Aagonl Air Supply: Minimum air pressure: 6bar Air consumption: 90NI / min Also configurable as a complete package with touch probe, software commissioning and training. (Annual maintenance & calibration can also be offered)

Condition: used, maximum load weight: 1,093 kg, overall weight: 1,500 kg, axle configuration: 2 axles, first registration: 03/2026, loading space length: 2,570 mm, loading space width: 1,530 mm, loading space height: 350 mm, total width: 1,660 mm, total height: 1,045 mm, A60 GW267PGA001 100 km/h version with shock absorbers installed Sideboards, railing, and more: with recessed, double-coated, and adjustable latches * Drop-down and removable sideboards on all sides * Anodized aluminum sideboards * 34.5 cm high * With robust wide-band hinges Attachment points for tarpaulins and nets: fitted fastening buttons for securing tarpaulins and nets Chassis and frame: optimum road stability thanks to test-track-proven chassis with STEMA safety V-drawbar * Tow hitch with safety indicator * Bolted chassis Hjdpfxsyqdp As Aagonl * Plastic scratch protection on tow hitch High loader, tandem axle, Manufacturer: STEMA, Type: SySTEMA SH .2, Gross weight: 1,500 kg, braked overrun, 2.51 m x 1.53 m, 100 km/h approval, etc. Errors and prior sale excepted.

Condition: new, Year of construction: 2025, the mobile bending machine with great performance: The compact, mobile design enables precise and repeatable bending stationary and directly at the installation site up to a tube diameter of 35 mm, CU 42 mm. A powerful three-phase motor and a precision gearbox provide powerful drive. The motor speed is automatically adjusted, resulting in increased return speed and shorter cycle times. Optimum bending accuracy and very high repeatability are achieved by position detection directly on the bending axis. The bending angle is easily and quickly set to 0.5° using pushbuttons. The large LCD display clearly shows the angles. The storage of up to three bending angles enables the rational bending of tubes with different bending results. For transport, the compact unit with accessories can be neatly and safely stored in sturdy transport cases. The "upright tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to enable crease-free bending and to bend bends with the slightest deformations from, for example, stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round iron can be bent without problems. POSSIBLE APPLICATIONS: - Hydraulic piping - Sample construction - Sanitary and heating construction - Technical data: - Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material. - Bending radius min/max: 36 mm/150 mm - Precise digital bending angle adjustment 0.5°. - Maximum 180º bending result; for special applications Endless operation possible - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop function - Alternating current 230 V connection - Weight 29 kg - Frequency converter and three-phase motor - 3 bending angles storable OPTIONAL ACCESSORIES: Hnsdpjnfvx Nefx Aagsl - Slide shoe holder - double roller holder - Profile bender PB20 - for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm - tripod base - machine case - tool case - Small bending device KBV - Special tool according to specification OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending up to an outer diameter of 100 mm stationary and directly at the assembly site. Transport is possible with lift trucks or the optional rollers. A powerful three-phase motor and a precision gearbox provide a powerful drive. The machine convinces with its compact and slim design as well as the very free bending range. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient and menu-driven user interface in 14 languages with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback.With the help of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The principle of "stationary tube and rotating tool" ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the profile bending attachment PB20 flat, square and round bars can be bent without any problems. Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering - Hydraulic piping - Meander bending - prototyping - Sanitary and heating engineering - shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material Hjdpfendk N Aex Aagenl three-phase current 400 V - Bending radius up to 500 mm - Multifunctional machine control Bending angle adjustment (0,1°) - Maximum bending angle 240 - Safety foot switch with emergency stop - Weight 600 kg OPTIONAL ACCESSORIES: - Adapter system for tools from model series 3000/6000 with bending radius from 45 mm, incl. hexagonal shaft 40 mm - Profile bender PB20 - for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm - Small bending device KBV - Special tools according to specification - Software adaptations for special tasks OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE PRECISION 3-ROLL BENDING MACHINE When developing the compact and mobile horizontal bending machine, the focus was clearly set on the production of dimensionally accurate coils such as handrails for spiral staircases. This is the supreme discipline, since two mutually influencing variables (radius and pitch) must be combined in a bend to form a dimensionally accurate geometry. The interaction of tube calculation on the PC, implementation on the bending machine, and control via the measuring equipment with final correction of the bending values ensure accurate bending. By simple and few inputs into the PC tube calculation program, the local printer provides a printout and supports the calculation of all necessary bending and correction data to operate the machine. A new powerful drive concept allows infinitely variable adjustment of the bending speed, requiring only a 230 V (AC) connection. Hardened steel tools as well as hard plastic tools that are gentle on the surface are available for selection. To ensure optimum feed even with tight bending radii, all three bending shafts are driven. The drive concept also proves its worth in tough daily use on the flat, when bending tubes and profiles. Customers of the 4800, 5000 and 6000 bending system have the option of purchasing the roller bending unit without the drive. The roller bending unit with the designation RB43, can be adapted to the bending systems 4800, 5000 and 6000 via the bending shaft. In this case, the machines act as a drive unit. POSSIBLE APPLICATIONS: - Handrails/bottom rails for spiral staircases - Large tubular profile bends - General metal construction TECHNICAL DATA: - Bending capacity Ø 10 to 60 mm - bending radius min: 300 mm at Ø 42,4 mm - Bending direction right and left - Digital bending adjustment for radius and pitch - Safety foot switch with emergency stop function - Maintenance-free robust three-phase motor - Construction site suitable 230 V connection - Weight 280 kg OPTIONAL ACCESSORIES: - Support roller - for stabilization - Lifting roller - to produce controlled slope - MGR - measuring device to determine the correct radius - MGV - measuring device to determine the correct slope based on torsion - MPW - PC calculation program to determine the correct bending values - RB4303 - universal bending tool for profiles up to 60 mm height - Tools for special profiles OUR SERVICE FOR YOU ON SITE: Hodpfxong A R So Aagonl - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE MANDREL BENDER WITH MANUEL CLAMPING: This mandrel bending machine with manual eccentric quick clamping for tube fixing enables rational bending. The compact drive unit with the detachable mandrel carrier offers advantages when used at the assembly site. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient touchscreen control with menu-driven user interface. The comfort control allows two speeds as well as a parameterizable overbending function to compensate for material springback. The bending sequence is significantly shortened by automatic "free travel" at the end of the sheet. For more complex bending tasks, bending programs can be stored with a maximum angle sequence of 50 bends per geometry. An almost unlimited number of programs can be stored on the control or a USB stick, as well as 200 materials. The plug-in bending tools allow rapid conversion to other tube sizes. For difficult geometries, the bending direction of the machine can be changed to right or left bending as standard. The open bending unit allows, for example, the bending of railing frames with only one weld seam. The optional calculation software on the PC determines the cut length for the entire geometry as well as the travel distance, twisting angle and bending angle for each bend. The mandrel retraction is programmable and can be retracted automatically ahead of time when a bending angle is reached. POSSIBLE APPLICATIONS: - Plant engineering, e.g. chemical industry - hydraulic piping - prototyping - Pipeline construction TECHNICAL DATA: - Bending capacity Ø 6 to 50 mm - bending radius min/max: 10 mm/140 mm - Bending radii 2 x D - multifunction machine control bending angle adjustment (0,1°) - mandrel beam lengths 1500/3000/4500/ 6000 mm (special version also longer) - Maximum 180º bending result - Weight 300-500 kg (depending on version) Optional accessories: - Automatic mandrel lubrication (minimum quantity) - Digital displacement measurement for length and twist (resolution 0.1 OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site Hnjdpfx Aajnfvy Ujgol - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ASSEMBLY. The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm stationary and directly at the assembly site. A powerful three-phase motor and a precision gearbox provide a powerful drive. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set quickly and easily via a convenient, menu-driven user interface with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback. With the aid of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The "stationary tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round bars can be bent without any problems.Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering- Hydraulic piping - Meander bending- prototyping- Sanitary and heating construction TECHNICAL DATA: Bending capacity 6000S: Ø 6 to 50 x 4 mm alternating current 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm three-phase current 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm three-phase 400 V - Bending radius min/max: 36 mm/280 mm - Optional large bending radii up to 500 mm - Multifunction machine control Bending angle adjustment (0.1°) - Maximum bending angle 240 - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop - Weight 110 kg OPTIONAL ACCESSORIES: - Profile bender PB20 - for bending flat and square iron up to max. 100 x 10 mm, round iron up to max. 20 mm - Roller bender RB43 - The RB43 is placed on the 6-edge shaft of the bending axis. By switching over to endless bending, the bending system acts as a drive unit. - Small bending device KBV Hnedpfong Ax Ssx Aagjl - Special tool according to specification OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via - Service contracts, maintenance at your site

Condition: used, Automatic High Quality Grinding Automatic High Quality Grinding Machine Type : Other All punch operators know the importance of tool maintenance on part quality and tool life. The AMADA TOGU is the solution; an automatic tool grinder design specifically for high quality grinding of sheet metal tooling. Unmanned operation Simple operator control Quick, reliable grinding of all standard tooling Supplied with jigs for shear angle grinding Restores tooling to optimum condition resulting in high quality parts Enables regular regrinding to maximise tool life USED AMADA AUTOMATIC TOOL GRINDER MODEL TOGU-III MACHINE SPECIFICATIONS Model ……………. TOGU-III Max. Diameter Tool Size ……………. 6.30 Max. Grinding …………… .039” Main Axis Motor …………… 2 H.P. 2 P Main Axis Rotation Speed ………….. 3000R.P.M. (60Hz) Main Axis Travel …………… 9.45” Main Axis Feed Motor …………….. DC Servo Motor (0.05 H.P.) Main Axis Feed Speed-High ………… 23.6 I.P.M. Main Axis Feed Speed-Middle ………. 2.36 I.P.M. Main Axis Feed Speed-Low …………. 0.002 I.P.M. Table Motor ……………. 0.134 H.P. 4P Table Rotation Speed …………… 72 R.P.M. (60Hz) Cooling Water Pump Motor ………….. 0.08 H.P. 2P Cooling Water Pump Flow …………… 0.9 CFM (60 Hz) Machine Weight …………….. 1,058 lbs Power Supply …………….. AC220V 3 Phase 2.5 kVA (Transformer Used Outside 220v Area) Air Supply …………… 60 C.F.M. Grinding Wheel …………….. CBN 5.31 Benefits: Fast and Easy to Use Fully automated machine Unmanned grinding cycle Easy operation – load ᐳ inputᐳ start Programmable re-grind amount High Quality Finish Automatic feed of wheel prevents tool burn Hnjdpfxjfuai Uj Aagjl Automatic grinding wheel dress indication Excellent surface finish Safe Unique safety locking system ensures operator safety Visual operation/standby indication Coolant and Filtration System Automatic coolant application prevents tool burn High quality finish maintained by filtration of coolant liquid

Condition: new, functionality: fully functional, power: 4 kW (5.44 HP), fuel type: diesel, overall weight: 550 kg, maximum load weight: 500 kg, chain condition: 100 %, Year of construction: 2025, Equipment: hydraulics, rubber tracks, Crawler Dumper 500S The professional lift dumper for maximum efficiency on the construction site The Crawler Dumper 500S delivers powerful material transport, precise dumping, and reliable technology. Its hydraulic lifting function up to 1,200 mm makes it the ideal solution for direct unloading into containers, trailers, or elevated loading areas—efficient, safe, and time-saving. Thanks to its compact dimensions, high payload, and robust construction, the Crawler Dumper 500S is perfect for confined construction sites, rough terrain, and demanding continuous use. Your Advantages: - Hydraulic lifting and tipping function (90°) for convenient unloading - Lifting height up to 1,200 mm—ideal for containers and trailers - Powerful Koop 173 diesel engine (4.0 kW, EU Stage V) - High payload of 500 kg with compact external dimensions - Optimum traction thanks to wide crawler undercarriage - Durable, low-maintenance design - Ideal for construction, landscaping, municipalities, and agriculture Technical Data: Engine: Koop 173 diesel engine Power: 4.0 kW Emission standard: EU Stage V Performance & Capacity: Net weight: 550 kg Hnjdpeyml D Hofx Aagjl Payload: 500 kg Skip volume: 200 dm³ Skip dimensions: 1,050 × 730 × 730 mm Lifting & Tipping Function: Max. lift height: up to 1,200 mm Tip height: 1,050 mm Tip reach: 220 mm Tip angle: 90° Operation: hydraulic Chassis: Chassis type: crawler undercarriage Track width: 180 mm Ground contact length: 1,000 mm Ground clearance: 110 mm Track gauge: 520 mm Performance: Travel speed: up to 4 km/h Climbing ability: up to 20° Minimum turning radius: 1,150 mm Dimensions: Overall dimensions (L × W × H): 1,570 × 880 × 1,450 mm Undercarriage width: 700 mm The Crawler Dumper 500S excels wherever reliability, maneuverability, and lifting capacity are required: - Civil engineering and construction - Landscaping and horticulture - Municipal services - Agriculture - Material handling in confined spaces Net price: €3,800 (RRP) Location: Rheda-Wiedenbrück Viewing by appointment possible Save now—better prices available! Take advantage of our attractive offers. Enquiries worth your while!

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 130 h, load capacity: 3,000 kg, lifting height: 7,000 mm, free lift: 2,118 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 3,043 mm, battery capacity: 930 Ah, remaining battery capacity: 100 %, battery voltage: 48 V, fork carriage width: 1,325 mm, fork length: 1,200 mm, fork width: 50 mm, ground clearance: 125 mm, overall weight: 7,500 kg, total length: 2,565 mm, total width: 1,500 mm, color: green, Equipment: CE marking, cabin, full service history, head guard, lighting, sideshift, TOP OFFER: Combilift CBE3000 Electric Multi-Directional Forklift – Year 2022 – 7m Triplex Mast Highlights at a Glance: Model: Combilift CBE3000 (Electric) Load Capacity: 3,000 kg Year of Manufacture: 2022 Lift Height: 7,000 mm (Triplex mast) Condition: Excellent condition, very little use (demonstration unit) Special features: Full cabin, hydraulic fork positioner & camera system Technical Data & Equipment: Performance & Lifting: Drive: Electric (efficient and quiet for indoor & outdoor use) Mast type: High-performance triplex mast Lift height: 7,000 mm Closed height: 3,043 mm Load capacity: 3,000 kg at 600 mm load center Battery & Charging: Battery: 48 Volt / 920 Ah (high capacity for extended operating times) Charger: External high-frequency charger included (120 A) Additional Features: Attachment: Hydraulic fork positioner (for quick adaptation to varying load widths) Tyres: Non-marking tyres (ideal for light-coloured industrial floors/warehouses) Hnsdoy R Auxepfx Aagel Full comfort cabin: With heating for year-round operation Safety: Integrated camera system with in-cab monitor for optimum visibility at great heights Extras: USB port in dashboard This unit is from 2022 and has seen very little use. It only shows minor wear consistent with age and is in excellent technical and visual condition. Thanks to the 7-metre triplex mast and compact multi-directional steering, the CBE3000 is the perfect solution for handling long goods and pallets in narrow aisles. Immediately available!

Condition: new, drill diameter 2.0 - 20.0 mm lip angle 90 - 135 ° turning speeds 4800 U/min voltage 230 Volt engine output 0.12 kW weight 8.6 kg range L-W-H 285 x 130 x 170 mm The handy DG 20 M drill grinding machine is ideal for grinding twist drills made of HSS, cobalt and hard metal. Thanks to the adjustable tip angle of 90° to 135°, this model can be used universally for 2-edged twist drills. Properties: - For grinding HSS and hard metal twist drills from 2 - 20 mm - ER 20 and ER 25 collets also enable clamping of intermediate sizes - Optimum grinding result thanks to the specially guided collet - Includes device for sharpening the drill tip - Universally adjustable tip angle from 90° - 135° - Fast and easy grinding process Scope of delivery: - CBN grinding wheel - ER 20 collets, 3 - 12 mm * 11 pieces (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 /12 / 13 mm) Hedexablxopfx Aagenl - ER 25 collets, 14 - 20 mm * 7 pieces (14 / 15 / 16 / 17 / 18 / 19 / 20 mm) - Collet holder ER 20 or ER 25

Condition: excellent (used), Year of construction: 2018, Marel 2730 salmon filleting machine with back and belly trim Hsdpfjy Aul Tsx Aagenl The Marel MS 2730 is an automated salmon filleting machine designed to maximize yield and throughput, capable of processing up to 25 fish per minute. It features automated size adjustments via a touch screen, includes advanced back and belly trimming, and is built for easy operation and hygiene. The machine accommodates salmon from 1.5 to 8 kg, with optional kits available for smaller fish, and is part of Marel's larger processing solutions. Key Features and Capabilities Automated Processing: The MS 2730 automatically adjusts to different fish sizes and uses electronically controlled tools to maintain high quality and consistent results. High Throughput: It can fillet up to 25 salmon per minute, increasing production efficiency. Improved Yield: The design includes a set of circular knives that capture meat near the center bone, significantly increasing fillet yield. User-Friendly Operation: A multilingual color touch screen provides easy and safe control over all operations, with pre-programmed settings for different fish sizes. Compact Design: The machine has a compact footprint, allowing for easier integration into existing processing lines. Technical Specifications Fish Size: Standard 1.5 to 8 kg, with a kit available for fish as small as 500 g. Water Consumption: Approximately 15 liters per minute. Power Requirements: Operates on 3 x 400V and requires a 3.3 kW power supply. Benefits for Processors Efficiency: Streamlines workflow with automated adjustments and high-speed processing. Quality & Yield: Produces high-quality fillets by including more meat and minimizing waste. Flexibility: Accommodates various fish sizes and is part of a larger, integrated system for comprehensive processing solutions. Cost-Effectiveness: Optimized water consumption reduces operating costs. The fish is fed into the machine belly down, which makes the infeed much easier and faster. An additional set of circular knives cuts the fish from vent to tail. This cut raises yield, as the meat close to the center bone is included in the fillets. For the belly bone cut, 4 sets of finger pressures secure maximum control of the fish and enable optimum cutting of both pre-rigor and post-rigor fillets. The result is high-quality fillets with higher yield and output. The MS 2730 automatically adjusts to various fish sizes, so there is no need to adjust once the program has been switched on. The MS2730 can process up to 25 fish per minute, depending on the length of the fish. With the built-in system for measuring the fish´s profile and size, the electronically controlled cutting tools can automatically adjust the filleting program to the fish´s size and shape. The result is higher throughput, quality and yield depending on trim specifications. With the optional small fish kit installed, the MS 2730 is capable of filleting fish weighing from 500 g up to 4 kg. Manufacturer: Marel Model: MS 2730 Year: 2018 Capacity: 25 fish per minute Fish size: 1,5-8 kg. Power Supply: 400/230V / 50 Hz Power: 5,5 kW Water consumption: 15 liter/min. Machine dimensions (LxWxH):  3.150x1.035x1.980 mm Machine weight: 1.000 kg.

Year of construction: 1988, condition: excellent (used), machine/vehicle number: 3284, (min.) material thickness: 0.65 mm (max.) material thickness: 2 mm Hnjdpfshbu E Hjx Aagel Technical Data: Width of film, max./min. 450/350 mm Forming area max. 430 x 160 mm Drawing depth max. negative/positive 6/20 mm (on request 22 mm negative) Top heater max. 10,15 kW Driving motors 3,0 kW Total connected load at 100 % duty cycle 12,7 kW Working air pressure 6 bar Air consumption (dependent on product) max. 1250 I/min Rate of water flow max. 1,0 m3/h COMPACT AND ROBUST - giving continuous high output. Easy and ergonomical operation (e.g. take- off height 1300 mm). QUICKLY CHANGEOVER - from 30° to 90° foil feed giving maximum material utilisation for both square and round lids. Heater changeover problem-free. PRECISION - The accuracy of the form table movement is guaranteed by linear guide bearings and hardened rods. The safe reliable guarantee for precision. OPTIMUM PUNCHING ACCURACY EVEN DURING MAXIMUM OUTPUT Cam controlled function sequence guarantees absolute precision with every cycle.

Condition: used, Year of construction: 2026, Special Price - Showroom Machine Garbsen Our Machine Concept WL 6 The Weima High-Performance - Shredders with their flexible application possibilities can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) into fuel chips, achieving enormous volume reduction of material for bulky items. Functionality: The machine is equipped with a large feed hopper and can be fed with a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees continuous and cost-effective material feeding without the need for manual assistance. The hydraulically controlled pusher supplies the wood waste to be shredded to the cutting area of the rotor and is automatically and load-dependently controlled. The internal pusher guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are suspended in a cardanic way to avoid lateral forces on the piston seals. The patented and profiled V-rotor made of solid steel has a diameter of 252 mm and operates with a rotor speed of 80 - 120 rpm. The concavely ground, aggressive, and 4-times reversible knives / cutting crowns are located in milled knife pockets on special knife holders; this patented system guarantees high throughput performance, low energy consumption, and optimum discharge of shredded material by reducing the cutting gap between counter knife and rotor for the first time. The screen located under the rotor determines chip size (10 - 100 mm ). A hydraulically opening screen basket is available upon request. Power transmission from the electric motors is via V-belts to a heavy-duty gearbox mounted on one end of the rotor shaft. Precise cut at high throughput with profiled V-rotor The specially developed by WEIMA V-rotor can be used universally and is made from solid material. Its aggressive material intake with up to two rows of knives guarantees high throughput with low power requirements. It can be equipped with hardened steel cutting knives with edge lengths of 30 mm and 40 mm. These can be turned several times in case of wear, which drastically reduces maintenance costs. Intuitive operation via Siemens PLC control with touch display To ensure that the electronics are optimally matched to the machine, we design, build, and wire our control cabinets ourselves. We use only high-quality components – for example from Siemens or Rittal. Intuitively operated touch surfaces guarantee quick adjustments. Functions such as setting the pusher stroke or stop ensure high throughput. The built-in overload protection also prevents defects on the machine. Technical Specification WL 6Feed opening 800 x 1,250 mmHopper capacity 0.9 m³Rotor length 800 mmRotor diameter 256 mmDrive power 22 kWRotor speed 90 rpmMax. number of knives 42 piecesKnife type and size concave / 40 x 40 mm, cutting crownsScreen perforation 10-60 mmPaint finish WEIMA Standard RAL 2022 / 7016Connection value 400 V +/- 5% / 50 HzWeight approx. 1,600 kgIncluding: - Control cabinet* (Rittal) incl. electrical control (Moeller/Siemens) and S Hnodpfsy D E Tdex Aagol

Condition: good (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, nominal power (apparent): 41 kVA, total height: 2,808 mm, total length: 2,880 mm, total width: 2,929 mm, table width: 550 mm, table length: 1,300 mm, table load: 1,200 kg, rotational speed (max.): 12,000 rpm, overall weight: 6,800 kg, operating hours of spindle: 9,271 h, spindle nose: 150-660, tool length: 350 mm, tool diameter: 80 mm, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, Mazak Vertical Machining Center VCS 530C – Well-maintained, inspected & ready for immediate use For sale is a Mazak VCS 530C vertical machining center in excellent, well-maintained technical condition. The machine has undergone regular servicing and is in outstanding optical and mechanical shape. It is fully functional, thoroughly checked, and immediately ready for operation. The Mazak 530C stands out with its high-quality features, including a 4th axis, allowing complex workpieces to be machined precisely and efficiently, providing enhanced flexibility. Additionally, the automatic door offers increased user comfort, resulting in reduced setup times and increased safety during operation. The integrated coolant system (KSS unit) ensures optimum chip evacuation, which in turn leads to longer tool life and excellent surface finishes. Combined, these features deliver a powerful package focused on productivity, precision, and reliability. With our all-inclusive service package, we can personally handle the complete process upon request—from delivery to commissioning of your new machine. This includes unloading, placement, and precise alignment of the machining center. Thereafter, our experienced service technicians will carry out professional commissioning, perform all necessary function checks, and ensure that your Mazak VCS 530C operates reliably and accurately. We also offer tailored training programs for your staff so you can make optimal use of the machine from day one. Even after installation, we remain your competent point of contact—whether for maintenance, technical questions, or future upgrades. With our all-inclusive package, you have nothing to worry about—we ensure everything runs smoothly so you can focus completely on your production. Additionally, you can acquire extraction systems, attachments, and accessories from us, including high-quality Donaldson extraction units to make your production even more efficient and cleaner. Hnsdpfx Aasy E Hhfsgjl Our service commitment: Quality, expertise, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians specialized in Mazak machinery and other equipment. We place great emphasis on personal support and are happy to assist you any time, even after your purchase. You are also welcome to inspect and test the machine under power at our facility at any time. You are cordially invited to visit us and see for yourself the condition and functionality of the machine. With us, you are in the best hands—professional, reliable, and passionate about machinery! PS CNC Service Germany GmbH & Co. KG All specifications are subject to change without notice.

Year of construction: 2021, condition: new, Derryglan Ltd - offer a wide range of industrial washer for every application, food, meat, butcher, bakery, pharma, labs, processors and general industry. Hjdogq N Ezspfx Aagjnl Washers for Utensils, Crates, Bins, Knife, Tray cleaning applications. JEROS Washers have a specially designed lid which opens fully to allow easy operation and loading without causing backstrain to operators. The special JEROS features provide easy installation of the machines. Even in the smallest production areas. Further, the machine can be used as a sink when not in use as an automatic Utensil Washer. The flush hose The flush hose makes it possible to reuse the wash water e.g. for cleaning the floors. The flush hose can also be mounted on the mixer tap if required. Mixer tap Built-in mixer tap allows washer to be used as a sink with separate drainage. Fulfils the highest hygiene standards Even the most persistent dirt is removed! The fully automatical detergent dispenser ensures the optimum dosage of soap. The powerfull pumps and rotating wash arms provide a brilliant wash result.The end rinse pump guarantees a constant temperature of 85?C during the entire rinse period and sanitisation of the utensils is achieved. An additional advantage of the high temperature rinse is the fast drying of utensils by evaporation, a rinse aid can be automatically added to assist with this process The New Generation The 9100 Series comprises a total of five new models: 9110 / 9115 with rotating wash systems and 9117 / 9120 / 9130 with wash frame system. Inside, the machines have been thoroughly redesigned, focusing on hygiene and easy cleaning. The inside surfaces and rounded to ensure quick and automatic flow of water back to the filter and pumps. Filters, wash arms and wash frames come in electropolished surface finishes leaving the stainless surface completely smooth to prevent dirt from sticking to surfaces of the machine. This makes it easier to clean and maintain the machine Efficiency and optimum hygiene safty, including HACCP, form the base of the JEROS, set of values. Energy saving up to 25 % All the machines are now available with 'i-version' as standard. This means that all machines have water saving rinse nozzles and that both the wash and rinse tanks are isolated, as also the lid is with double wall and isolated. The machines therefore require less operating power, resulting in energy and water savings of up 25 % for all the models. It is also possible now to set the machines to 'auto off', as required, so that they do not have to be left unnecessarily in standby mode if they are not used for prolonged periods of time, etc. Eco wash As standard all models includes an environmentally friendly 'ECO wash' programme for less dirty objects. Pushing 'ECO wash', the machines wash with a reduced wash temperature and use less soap. Still the rinse with 85? C hot water for guarantee of hygienic result New double Micro-Filter: Unique double filtration system, with a progressive micro-fine filter, provides an efficient filtration of the wash water - thus entails a perfect washing result with less soap consumption and minimal water consumption Larger particles are collected in a coarse filter, wereas smaller particles are captured in the self-cleaning micro-fine filter. During the washing/rinse process, the collected particles are drainet out of the micro-fine filter from the bottom, just as well from the surface of water. this ensure a constant optimum wash water quality

Condition: like new (used), Year of construction: 1999, functionality: fully functional, operating hours: 24 h, total width: 1,000 mm, total height: 2,500 mm, overall weight: 1,200 kg, I am selling stainless steel MK2 M&P engineering onion peeler, machine is fully refurbished, after full service & ready to work. The large onion peeler from M&P engineering tops, tails and peels onions of 45mm to 115mm diameter using self adjusting floating knife assemblies over a range of up to 25mm on any one setting. It then slits the onion horizontally from top to tail, the depth of slit is determined by onion quality and grade. The machine finally removes the skin using compressed air providing an end product of optimum appearance. Link for video presentation by producer: Excluded air screw compressors but for serious enquire i could help out with additional equipment. Capacity 2700- 4500 kg /h of peeled onion Hnjdpfourb R Eex Aagel

Year of construction: 2026, condition: new, functionality: fully functional, total length: 640 mm, total width: 735 mm, total height: 170 mm, machine/vehicle number: 2026, Stainless steel pedestal for bread presses / dough dividing machines suitable for all gänigen bread presses massive art work equipped with 2 to easy lifting with the pallet truck Stainless steel for optimum cleaning Dimensions: 735 x 640 x 170 mm, WxDxH Hnjdpod Egxfofx Aagsl

Condition: new, Year of construction: 2025, Screen printing drying racks, present a few rust defects (can de cleaned by metallic brush) - So big discounts applied. New units : to assemble Prix : 800€ (1 unit) 750€ (2 units) 700€ (3 units) 650€ (5 units) 600€ (10 units) Transport not included, to be added The screen printing or flatbed printing drying rack, a space-saving and really useful piece of equipment for printing professionals. Designed to meet the needs of screen printing and offset printing workshops. Main features 50 grid drying racks, 70 cm x 100 cm. Dimensions movable screen drying rack: 70 cm x 100 cm, perfectly suited to a wide variety of flatbed printing media. Hnodpfxsxqx Tbo Aagsl 50 grids or layer for flatbed drying to dry a large volume of visuals. Outer size : 110 cm x 83 cm x 148 cm Robust drying trolley on wheels, offering optimum mobility and flexibility in your workshop.

Condition: as good as new (ex-display), Year of construction: 2019, functionality: fully functional, turning diameter over cross slide: 415 mm, turning length: 850 mm, turning diameter: 390 mm, spindle bore: 105 mm, spindle speed (max.): 2,000 rpm, travel distance X-axis: 225 mm, travel distance Z-axis: 950 mm, rapid traverse X-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, total height: 1,980 mm, total length: 4,600 mm, total width: 1,900 mm, quill diameter: 100 mm, quill stroke: 120 mm, overall weight: 7,000 kg, bar passage: 90 mm, chuck outer diameter: 300 mm, controller manufacturer: Siemens, controller model: 828D + Shopturn, Equipment: documentation/manual, max. turning diameter 390 mm Hnedpfsfk Et Asx Aagsl Z-axis travel: 950 mm max. spindle speed: 2000 rpm AC spindle motor SIEMENS (cont./15min) 25/33 kW bar capacity: 90 mm spindle nose: A2-11 Including accessories a. o: SAUTER 12-station turret VDI-40 Trifix holder for driven tools C-axis with spindle clamping and stabilization Wide and stable flat guides 45° inclined bed for optimum chip fall Hinged belt chip conveyor with chip bucket 3-jaw Kitagawa power chuck ø 300 mm Tool measurement can be swiveled in manually Hydraulic tailstock manually adjustable with programmable tailstock quill Coolant unit with powerful pump (4 bar) Rittal filter fan on the control cabinet

Condition: excellent (used), REMS TORNADO 2010 THREADER Product description: - Reliable, highly efficient machine for threading, cutting, deburring, threading of nipples, rolling - For installations, locksmiths, production plants - Strong, compact, adjustable design suitable for construction sites and workshops - Operating principle: rotating material - stationary tool - Automatic: clamping chuck, universal threading head, lubrication and cooling - Large workspace and chip container - Adjustable material support - Extremely strong and fast drive e.g.: 2” thread only 15s - Completely maintenance-free gear in a closed oil bath - Two base versions: - portable version on 3 legs, with a removable, large oil tray and chip bowl - T version with a combined, larger oil tray and chip container, for installation on table. A fixed base or a trolley with space for putting away the material, for easy transport, with an optimal working height, stable, as additionally paid equipment - Three high-performance motors to choose from: - a high-performance universal motor, 1700 W, overload protection, rotation speed 53 1/min. - a capacitor motor 2100 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - a three-phase motor, 2000 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - A convenient two-stage foot safety switch with an emergency button, thanks to which the entire body weight is loaded during work - Two automatic clamping holders with self-centering clamping jaws. Quickly and easily clamp and release the material - Self-clamping chucks ensure maximum clamping force - Strong, reliable pump with high delivery capacity - Optimum multi-sided guidance of the threading agent through the die head exactly to the threading location guarantees clean threads and long service life of the die dies, gear and motor Hnsdpfxev T Trus Aagsl - Only one automatic universal die head for all threads, also long ones; automatically opening - with automatic thread length for tapered threads - Fast, easy adjustment of the thread size - Clear thread scale - Easy and quick change of the die dies thanks to their positioning in the clamping part - Reliable, indestructible, high-quality REMS die dies with optimum geometry guarantee very easy entry into the material, easy threading and clean threads. They are made of load-bearing, specially hardened steel for an exceptionally long service life. - Self-centering pipe cutter. Sturdy frame made of forged steel. Ergonomic, wide handle for strong spindle pressure - Specially hardened cutting wheel made of reliable, tough-hard knife steel ensures long service life. - Internal deburrer, Stable, easy-to-use deburring device with variable deburring position. - Specially hardened and machined blade guarantees easy deburring and exceptionally long service life - Two blades for optimum deburring, especially with small pipe diameters

Condition: good (used), Year of construction: 1997, functionality: fully functional, clear span: 19,000 mm, load capacity: 300 kg, For sale is a used Mecalux mezzanine storage system / multi-tier racking installation, consisting of frame racks with two walk-on mezzanine levels, stairs, and peripheral handrails. The system makes optimum use of the hall height and is ideal for carton storage, small parts storage, order picking, or light assembly work. Technical data: • Manufacturer: Mecalux • Year of manufacture: 1997 (per nameplate) • Type: 3-level racking system with 2 mezzanine floors • Footprint: approx. 19.0 m × 7.8 m ≈ 148 m² Levels / Surfaces • Ground floor (rack level): • Base area approx. 19.0 × 7.8 m (≈ 148 m² storage area) • Clear usable height below 1st mezzanine: approx. 3.10 m • 1st upper floor / 1st mezzanine: • Gross area approx. 19.0 × 7.8 m ≈ 148 m² • Less stairwell area (approx. 1.0 × 6.0 m ≈ 6 m²) • → usable area approx. 142 m² • Clear headroom above: approx. 2.70 m, in areas with braces (approx. 0.50 m) approx. 2.30 m • 2nd upper floor / 2nd mezzanine: • Depth mostly approx. 5.90 m, width approx. 19.0 m • Gross area approx. 112 m² • Less stairwell area (approx. 1.0 × 6.0 m ≈ 6 m²) • → usable area approx. 109 m² ➡️ Total usable area of both mezzanines: approx. 399 m² Stairs & Handrails • 2 × stairs, each • Width approx. 1.0 m • Length approx. 6.0 m • Stable steel steps with anti-slip markings Hedpex Dtuaofx Aagenl • Handrails on both sides • Continuous handrails on the mezzanine levels • Additional safety by chains at access points Decking & Load Capacity • Mezzanine decking: robust wooden flooring / panel covering • Permissible load per nameplate: 300 kg/m² Lighting • Areas above the mezzanines are equipped with lighting, so the mezzanine levels are already illuminated. Condition • Very well-maintained, lightly used condition • Despite its 1997 year of manufacture, the system appears nearly as new • Mainly just dust on the floors, no visible structural damage to frames, handrails, or stairs • Nameplate present, data legible Location & Handling • Location: 59227 Ahlen • Availability: by arrangement, short-term possible • Viewing: possible by prior appointment Disassembly & Transport • Disassembly by the buyer. • Support with disassembly and loading can be arranged for an extra charge upon agreement. • Transport to be organized by the buyer.

Condition: new, neu ca. 6-8 Wochen ab Auftrag 10265 € 197.09 € 4000 x 2000 mm 850 mm 8000 kg 2340 kg 200 mm 28 mm Hnodpfxeyq Sqze Aagsl - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 3420 € 2000 x 1000 mm 850 mm Hedpfxjwir A Ns Aagjnl 8000 kg 712 kg 200 mm 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners NOW AVAILABLE AS AN ATTRACTIVE PROMOTIONAL PACKAGE: INCLUDES 36-PIECE STARTER SET INCLUDES 12-PIECE HISWELD PACK 2 PROMOTIONAL PRICE € 4.224,00 (INSTEAD OF € 5.108,00)

Condition: new, neu ca. 4 Wochen ab Auftragse 1940 € Hsdpfxswirwas Aagjnl 2000 x 1000 mm 850 mm 449 kg 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet with levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 500 kg/m²