Used Shell Gripper for sale (1,368)

Year of construction: 1979, operating hours: 500 h, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 123, We are selling a Bosch Höller 3 edge-sealing machine that underwent a general overhaul in 2022. The machine has been fully converted to servo drive and fitted with an S7 control system. Coloured or clear film is fed via a roller, folded into a bag measuring 11 cm wide by 15 cm high, and sealed. The grippers can be individually adjusted within the frame as required. Product feeding is via a screw feeder, which also operates fully electrically with all standard parameters. The machine is fully operational. Depending on the product to be filled, speeds of 40–60 bags per minute can be achieved. Iiodeizag Tepfx Aatef

Condition: good (used), Year of construction: 2014, functionality: fully functional, Sheet width: 3000 mm Sheet length: 1500 mm Sheet thickness: 8 mm Workpiece weight: 200 kg Punching force max.: 220 kN Total power requirement: 9.5 kW Iisdpfx Aaoy Sak Tstef Space requirement approx.: 7395 x 6540 x 2072 mm Equipment: Punch head: - Hydraulic single-tool chuck with 360° rotation - Manually adjustable clamping force - Programmable clamp (active/passive/re-positioning) - Spray lubrication for punch - Stroke counter for punch - Level monitoring for threading and tool lubrication Control system: - Open control system based on Sinumerik 840 D - 12" TFT color display - Teleservice via internet - Automatic shutdown Data transfer: - USB interface - RJ-45 network connection Safety: - CE marking - Dual light curtains - Rapid shutdown of hydraulics - Bulge detection Programming: - TruTops Punch via network access 1 x MultiTool function 1 x MultiShear function 1 x Thread forming function 1 x Deburring and rolling technology 1 x SoftPunch function 4 x individually openable clamping jaws 4 x height-adjustable clamping jaws 1 x Re-positioning cylinder 1 x Sensor for stripper (included in rest material-free processing) - GripMaster - Rest material grippers with sensor technology - Shear lift table 400 mm - Tilting rest material pallet 3000 x 1500 mm - SheetMaster - Operating hours: 65,000 h

Condition: excellent (used), End mill for cylindrical surfaces Shell mill Manufacturer: Mitsubishi Type: SPX4R05034BT50NM Length: 340 mm Iedpsd Hfi Uefx Aatoif

Year of construction: 2019, condition: good (used), Aluminum cylinders with diameters of 140 mm and 90 mm, wall thickness 5 mm; a clamping ring secures the 50 mm shaft stub, which is turned down to 45 mm; shell length: minimum 2720 mm, maximum 2800 mm. 27 pieces of 90 mm diameter cylinders, 6 pieces of 140 mm diameter cylinders. Price applies to the total quantity. Iijdpfsy Nc H Eox Aatof

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT22702018968, empty load weight: 4,000 kg, maximum load weight: 23,000 kg, overall weight: 27,000 kg, axle configuration: 2 axles, first registration: 02/2016, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R19,5", color: red, The images shown are archive photos! The vehicle may currently be in use! 2-axle flatbed semi-trailer Type SZS 270 Mega RH 95 Weights and Dimensions: Perm. / technical gross weight: 27,000 kg Perm. / technical payload approx.: 23,000 kg Perm. / technical axle load: 16,000 kg Perm. / technical fifth wheel load: 11,000 kg Unladen weight approx.: 4,000 kg +/- manufacturing tolerance Overall length approx.: 13,850 mm Maximum overall width: 2,550 mm Overall height approx.: 2,220 mm Platform length approx.: 13,650 mm Platform width approx.: 2,480 mm Fifth wheel height approx.: 950 mm King pin installation measurement approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Vehicle consists of: Chassis: Spedition semi-trailer frame Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin Outer frame with "Load-Lock profile" for lashing strap attachment, note: to attach straps when side walls are fitted, the side walls must be opened! 14 pairs of lashing rings, each rated to 2.5 t 24-t, 2-speed landing gear, operated from one side, with straight base, without equalizer Without support legs Wheel chocks with holder Side underrun protection, aluminium Rear underrun protection, steel Quarter-shell mudguards Axles & Suspension: SAF disc brake axles Air suspension Braking system: 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at front, without connecting line EBS, electronic braking system with EBS socket front, without connection cable Attention: The trailer may only be towed by tractors capable of ensuring the ABS functions correctly! With raise & lower valve Vehicle stability system Wheels and Tyres: 385/55 R19.5” – make according to manufacturer’s choice Iodpfxey Rxmws Aatsif Steel rims, factory silver Electrics: 24 Volt, multi-chamber tail lights, amber LED side marker lamps 2 white position lights at the front with protective bar 2 white/red lane marker lights at the rear 2 x 7-pin fail-safe sockets at front, without connection cable Floor: Anti-slip phenolic plywood floor approx. 30 mm thick, cross joints with Omega insert, on longitudinal beams for high point load capacity, suitable for forklift axle loads up to max. 7,100 kg Note: Floor warping due to weather influences possible! Front bulkhead/corner posts: 25 mm aluminium hollow profile, approx. 1,350 mm high, corner posts made of steel, high volume design, with “holes” for forklift drivers Approval / Markings: Germany With Dekra inspection and certificate 24/7 service hotline Prepared for one-line license plate holder Warning sign according to ECE-70 Conspicuity markings with reflective tape according to ECE R 048; side in white, rear in red Painting: Frame: RAL 3002 carmine red Landing gear: Black coated The images shown are archive photos! The vehicle may currently be in use!

Condition: like new (used), High volume production of small components including stair wedges, stair glue blocks, corner blocks for chairs, filler pieces, and more. Key Features: Iiodpozd Uxmofx Aatjf Self centring grippers and centreline cutting with angles of +/-60 degrees. Hopper fed with a standard length capacity of 1350mm - components are collected in box underneath. Produce up to 800 pieces per hour. Small footprint to maximise floor space. Condition - As New [only been used for showroom demonstrations.] 1350mm x 200mm x 80mm Capacity Cutting thickness from 10mm to 80mm Cutting width from 10mm to 200mm 3 seconds per operation - feeding, cutting & drilling = 9 seconds Up to 60m/min advancement speed 4kW saw motor +/- 60 degree rotation - mechanical adjustment Completely enclosed interlock saw cabin Outfeed conveyor belt

Condition: used, mileage: 521,793 km, power: 154 kW (209.38 HP), first registration: 11/2004, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, emission class: euro3, total length: 9,230 mm, total width: 2,550 mm, total height: 3,550 mm, The vehicle does not have a valid MOT (TÜV), but is ready to drive. Iiedpfx Aszrkd Uoatsf Manufacturer code Text Model: ML120EL21/P | EU Restyling 11-12 t (MK1) (Q110) WS-IC: 0 EXHAUST BRAKE DEL DIFF LOCAL WITHOUT TOWING HITCH Delete underbody protection strip WHEEL SPACERS (2) 120 km/h speed limiter 143 Ah BATTERY SAFETY BELTS ROOF VENTILATOR HOOD ELECTRIC WINDOW LIFTERS FOR REAR WINDOWS Preparation for cab PTO STEEL AIR TANKS 02095 Air dryer NO FRONT VENTILATION CENTER EXHAUST PIPE DEL. WHEEL GUARD DEL. SIDE PROTECTION F. Underbody protection bar SPARE WHEEL WARNING TRIANGLE NO ADR EQUIPMENT EUROCARGO BAD 3 CRUISE CONTROL NO FMS DATA TACHO 2 DRIVE WITHOUT ROOF STANDARD CAB HEATER DEL. HEATED WINDSCREEN NO TINTED WINDOWS MIRROR MAX SIDE SKIRT WHEEL CARRIER NON-REINFORCED CAB MLC CAB, LOW ROOF REAR CROSS MEMBER SNORKEL AIR INTAKE STANDARD TOOL KIT NO BEDS PARAUR/PARAF GRIGIO ELECTRIC SHELL LI NO PROV R. EC0 BASIC LINE - CLUSTER NO BALL HEAD C Delete cool box 04311 FABRIC INTERIOR 04311 04545 DEL. FIRE EXTINGUISHER. 04604 Remove door blinds STD BRAKE SYSTEM VERT AIR FILTER LITER FUEL TANK Portable flashlight NO REAR WHEEL MINUS GBOX SIDE PTO FIRST AID KIT NO INDIVIDUAL CAB HEATER 120EL BADGING DEL. PACKAGE SHELF STD IVECO ANT05848 3.31 R. Axle ratio DR AX AIR SUSPENSION TRANS Mounting kit for tail lift NOT HEATED P70A ALTERNATOR 225-cm³ air compressor NO MULTIPOWER 06368 STANDARD CAB EQUIPMENT TEMP CLIMATE PACKAGE LHD FOR RH CIRCLE 06439 STD AIR TANK PLATES STANDARD GVW NO CUSTOMIZATION 06448 06521 NO TRAILER SOCKET 06523 DEL. BATT SWITCH 06528 NO 12V TRAIL 06528 DEL CENT. LOCKING 06538 WITHOUT IMMOBILIZER 06538 06539 NO ROTATING ROOF WARNING LIGHT DOUBLE BAND FROM FABRIC 06624 FAAIR DRIVER'S SEAT HEADREST NO POLLEN FILTER DEL EXT SUN VISOR 88/321/EEC ERVM SOLO VERSION TD FRONT AXLE LOCATION NO 24/12V CON 007279 PLASTIC FRONT BUMPER LOADS 4400- RED CH/SILVER WHLS JACK 07748 MANUAL CAB TILT FROM BODY DEL ARCHES/CANOPY GENERIC TOW H07812 CLUSTER KMH MANUAL MIRRORS ENG SPD 2700 (2860) 11-12 11-12 tons TIRES 245/70R17.5 20167 210 210 TCA 30001 CHARGED BATTERY LIBRETTO TEDE33354 4815 4x2 4x2 WHITE IC 194 etc. Appointments and test drives by telephone arrangement. The information provided on the internet is a non-binding description. It does not constitute guaranteed properties. The seller is not liable for typing and data transmission errors. Subject to errors and prior sale.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, load capacity: 16 kg, arm reach: 1,610 mm, The KR16-2 is designed for a rated payload of 16 kg in order to optimize the dynamic performance of the robot. Main Applications: - Welding - Dispensing - Additive Manufacturing Model: KR16-2 (KR16-2 Foundry option is also available) Condition: USED Iiodpfx Ajq A Uqbeatof Year: 2012 (2010, 2011 options are also available) Controller Cabinet: KRC2 ed05 Included: Manipulator + KRC2 ed05 Control Cabin + All Wire Sets + Teach Pendant (Gripper and the base is not included) - FULL SET Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman. (Source: KUKA's Website)

Condition: excellent (used), power: 129 kW (175.39 HP), operation weight: 18,800 kg, Year of construction: 2014, operating hours: 14,245 h, Equipment: air conditioning, cabin, CATERPILLAR M320F year: 2014 operation hours: 14.245 hrs. ROPS Airco Radio Back drive camera hydr. 2 piece boom stick: 2,50 meter all hydr. lines (hammer-, gripper-, scissor-) Iijdpfx Aszud Apeatef Pre-configured for the Trimble GCS900 Quick coupler OQ65 1 x Bucket with 800mm width central lubrication Camso tyres 10.00-20 approx 50% good blade support ( 2.5m width) CE Engine with 129kW Transport : 9x2.5x3.30m operation weight: 18.8 to.

Condition: used, Equipment: soot filter, - Particle filter - Gripper - 3 shovels - Excellent condition Suspension: Iijdpfx Aszhhv Tjatof Hydraulic

Condition: ready for operation (used), Year of construction: 2016, A Burkhardt + Weber heavy-duty CNC large-format machining center is available. Axis travel X/Y/Z: 1600mm/1250mm/1250mm, tool interface: SK50, pallet dimensions X/Y: 800mm/1000mm, 125mm tool pockets: 95, 225mm tool pockets: 7, 350mm tool pockets: 5, 420mm beam tool pockets: 5, coolant system capacity: 1900l, control: Siemens 840D with ShopMill, operating hours: approx. 20000h. Including coolant system with paper band filter, machine enclosure, through-spindle coolant, external coolant nozzles, chip conveyor, dual-gripper tool changer and HV-NC swivel head. Documentation available. An on-site inspection is possible. Isdpfx Aezp Rgqeatjif

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, control type: CNC control, degree of automation: automatic, Fully automatic swivel bending machine with warehouse integration Manufacturer: TRUMPF Model: TruBend Center 7030 (B34) Year of manufacture: 2022 Iiedpfx Aaox Tii Ijtsf Control: TecZone Fold programming, touch operation, additional screen TECHNICAL DATA: Max. bending length: 3,123 mm Min. bending length: 200 mm Max. box height: 220 mm Max. component size: 3,120 x 1,500 mm Max. diagonal of component: 3,460 mm Max. material thickness: Steel: 3 mm, Stainless steel: 2.2 mm, Aluminium: 4 mm Min. material thickness: 0.4 mm Min. bending depth (standard tool): 145 mm Min. bending depth (retractable hold-down tool): 30 mm Connected load: 80 kVA Average power consumption: 15 kW Space requirement (L x W x H): 8,348 x 5,113 x 3,345 mm (min. hall height: 4,300 mm) EQUIPMENT: - Front gauge - Loading grippers - Rotating part manipulator - 2-axis part manipulator with vacuum modules - 5-axis backgauge - Optical angle assistant - Hold-down tools - ToolMaster - Control unit with foot switch - ACB Laser (Automatically Controlled Bending) - 3-surface vacuum module set - 2-surface magnet module set - Bending tools OBW90 and UBW90 - Retractable hold-down tool ENW - Additional bending tool function ZBW Comprehensive set of various tools included AUTOMATION: - Robot and warehouse interface (use without warehouse requires adaptation) - Loading and unloading unit with warehouse integration (without pallet), including for blank separation - Safety fence, swing doors, light barriers - Unloading table with conveyor system Further information available in the pictures. This used machine can be inspected under production conditions. All information is without guarantee – sale excludes any warranties or guarantees. Subject to prior sale.

Condition: like new (used), Year of construction: 2018, operating hours: 13 h, functionality: fully functional, machine/vehicle number: Roboter 512829 / Steuerung 393648, overall weight: 125 kg, load capacity: 10 kg, arm reach: 1,101 mm, This is a used and fully equipped KUKA KR 10 R1100 sixx industrial robot from the AGILUS series, featuring a KR C4 compact controller from 2018. The system is engineered for high-speed pick-and-place, assembly, and handling tasks in industrial automation. With a 10 kg payload and a reach of 1101 mm, the robot is ideal for compact production cells with high cycle rates. The installed parallel gripper further expands its application range for direct handling operations. Iiedpfxoy Ntc Re Aatef

Condition: used, machine/vehicle number: WFDFLT33902030059, empty load weight: 7,452 kg, maximum load weight: 27,548 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2023, loading space length: 13,460 mm, loading space width: 2,470 mm, loading space height: 2,655 mm, loading space volume: 92 m³, total length: 13,800 mm, total width: 2,550 mm, total height: 4,005 mm, suspension: air, tire size: 385/55 R22,5", color: black, The images shown are archive images; the vehicle may still be in use! Weights and Dimensions: Permissible / technical gross weight: 35,000 / 39,000 kg Permissible / technical payload approx.: 27,548 / 31,548 kg Permissible / technical aggregate load: 24,000 / 27,000 kg Permissible / technical fifth wheel load: 11,000 / 12,000 kg Unladen weight (basic version) approx.: 7,452 kg +/- manufacturing tolerance Overall length approx.: 13,800 mm Overall width max.: 2,550 mm Ijdpjwk Dc Refx Aateif Overall height approx.: 4,005 mm Internal length approx.: 13,460 mm Internal width approx.: 2,470 mm Internal height front approx.: 2,655 mm Internal height rear approx.: 2,853 mm Volume approx.: 92 cbm Fifth wheel height approx.: 1,130 mm King pin installation dimension approx.: 1,640 mm Front corner dimension approx.: 2,040 mm Chassis Semi-Trailer for Forwarding Fine-grain steel lightweight welded construction, up to the landing legs, fifth wheel plate with replaceable 2" king pin. Prepared lashing rings integrated into the floor (max. 13 pairs) 24-ton two-speed landing gear, single-sided operation, straight lower part, without load equaliser Pull-out ladder at rear Door retainers on the sides Wheel chocks with holder Aluminum side underrun protection Steel rear underrun protection with wide Fliegl mud flaps Foldable fender for lighting unit Quarter shell mudguards Rear impact protection Axles & Suspension BPW disc brake axles Air suspension 1st axle with automatic lift axle, including forced lowering and start assist, activation via triple brake application Brake System Two-line compressed air brake system Colour-coded line routing for easier servicing Spring-loaded parking brake Two fail-safe coupling heads at front, without connecting line EBS, electronic braking system with EBS socket at the front, no connecting cable Wheels 385/55 R22.5" Electrics 24 volt, multi-chamber lights, yellow side LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin fail-safe sockets at the front, without connecting cables SB Hydraulics Hydraulic cylinder with sliding unit integrated in the floor. Dual-circuit hydraulics. Note: A dual-circuit hydraulic system is required! Recommended pump capacity: Capacity: 110 l/min Pressure: 250 bar Min. oil tank capacity: 100 l SB Tipper Body Aluminum box-type tipper body made from high-grade, wear-resistant material. Front and side walls made from aluminum hollow sections, welded with a wide special reinforcement profile around the top and a special reinforcement frame at the bottom. Sliding bulkhead for improved unloading of cargo, with reinforced tarpaulin flaps at the bottom. Rear wall made of aluminum hollow sections as a two-leaf door, split 1/2 to 1/2, framed all round with a special U-profile with stop and rubber seal, fitted with two external rotary bar locks, locked at top and bottom. Rear wall with mechanical safety lock, operated at the rear on the left side in direction of travel. Including a swivelling crossbar at the top. Standing platform with ladder access on both sides (left/right in direction of travel) and guardrail for opening and closing the roof tarpaulin Removable, swivelling crossbars for tarpaulin support + tarpaulin support at front bulkhead and at rear wall. Roll tarp can be stored on one side with two longitudinal tension belts, 3 ratchet tension belts on the side. The tarp is fastened with hooks and rubber ropes at the front bulkhead and above the rear doors; features

Condition: like new (used), Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, punching force: 300 t, overall weight: 18,000 kg, The equipment has been used very little,it is almost like new, and has under 1,000 operating hours. Max. sheet size: 1060×740mm Min. sheet size: 400×360mm Stock range: Paperboard157~2000gsm Iiedpfxewhvq Ie Aatsf Corrugated board (E,B LUTE) Min. gripper edge: 4mm Max. die-cutting size: 1040×730mm Max. pressure: 250tons Max speed: 7500sph Rules height: 23.8mm Main motor capacity: 11kw Total power capacity: 23kw Dimensions (L×W×H): 6000×4200×2400mm Net weight: 18,000kg

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, NAKAMURA-TOME SC-100X2 Technical Specifications L-Spindle (Main Spindle): Bar capacity Ø51 mm / 6,000 rpm R-Spindle (Sub Spindle): Bar capacity Ø42 mm / 6,000 rpm Machine Features: Two tools in cut (simultaneous machining with two tools) Lower turret + 2-axis machining on R-spindle Easy-to-use Superimposed Cycle Standard Equipment: Isdpjy A Exksfx Aatsif Milling and Y-axis are standard L-spindle motor: 11 / 7.5 kW R-spindle motor: 7.5 / 5.5 kW Milling motor: 7.1 / 2.2 kW / max. speed 6,000 rpm Lower turret equipped with manual unloading gripper Lubrication oil recovery system (standard specification) Environment-friendly inverter-type hydraulic unit

Condition: used, maximum load weight: 29,952 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2024, next inspection (TÜV): 05/2027, loading space length: 9,807 mm, loading space width: 2,440 mm, loading space height: 2,200 mm, loading space volume: 49 m³, total width: 2,550 mm, total height: 3,900 mm, Equipment: ABS, In accordance with our “General Terms and Conditions,” without any guarantee or warranty, we can offer you the following vehicle, subject to finalization, errors, typographical errors, and prior sale: Schmitz, approx. 49 cbm grain tipper (Vehicle 572) First registration: 05/02/2024 Permissible total weight: 36,000 kg Unladen weight: 6,048 kg Payload: 29,952 kg Overall length: 11,060 mm Overall width: 2,550 mm Overall height: 3,900 mm Internal length approx. 9,807 mm x Internal width approx. 2,440 mm x Internal height approx. 2,200 mm MOT valid until: 05/2027, roadworthiness test valid until: 11/2026 Rollover tarpaulin, platform 2 x support legs Dust bag 2 x wheel chocks Air suspension with raising and lowering function Shovel and broom holder on the driver’s side in front Isdpszfdmvofx Aateif 1st lift Schmitz coupling Tires: 385/65R22.5, 1) approx. 40/30%, 2) approx. 80/40%, 3) approx. 40/40% Half-shell mudguards, plastic Tow hitch at the rear 2 x LED reversing lights Fold-up underrun protection Swing gate with grain slide and rubber seal Price: €35,000.00 (net) All information is provided without any guarantee or warranty. Our “General Terms and Conditions” apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the local court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typographical errors, and prior sale.

Condition: good (used), Barrel lifter, barrel handling, barrel gripper, barrel lifter, barrel handling, barrel gripper -Drum lifter with: gripper head -Load capacity: kg -Suitable for: 1 x 200-L steel bung drums, steel lid drums, rolling hoop drums -Reception: 410 mm -Automatic opening when: setting down the barrels -Number: 2x grippers available -Price: per piece Isdpfx Ajd Aghkjateif -Dimensions: 340/305/H900 mm -Weight: 47 kg

Condition: excellent (used), power: 190 kW (258.33 HP), fuel type: diesel, color: yellow, Year of construction: 2017, operating hours: 10,650 h, Year of manufacture: 2017 Drive: Wheeled Number of cylinders: 4 Unladen weight: 65,000 kg Superstructure brand: LIEBHERR LH 60 M LITRONIC CE marking: yes Technical condition: very good Optical condition: very good LIEBHERR LH 60 M LITRONIC MATERIAL HANDLER – YEAR OF MANUFACTURE 2017 – 20 M REACH For sale is a powerful and excellently equipped Liebherr LH 60 M Litronic material handler from 2017, ready for immediate use in scrap, recycling, port, and bulk material handling. This reliable machine offers an impressive reach of 20 meters and is powered by a powerful Liebherr D944 A7-04 engine with 190 kW (258 hp). The robust undercarriage with 4-point support provides maximum stability, while the hydraulically elevating cab ensures excellent all-round visibility and high operating comfort. Equipped with an industrial straight boom Z1 of 9.10 m and an industrial, heavily angled stick of 6.80 m, this machine is ideal for demanding handling operations. Includes a 5-tine grapple and a multi-shell grapple with a capacity of 1.10 to 1.70 m³. Technical data Manufacturer / Model: Liebherr LH 60 M Litronic Year of manufacture: 2017 Operating weight: 65,000 kg Reach: 20.0 m CE certified Engine: Liebherr D944 A7-04 Power: 190 kW / 258 hp Wheelbase: 3.40 m Ground clearance: 47.5 cm Undercarriage width: 3.53 m 4-point support Hydraulically elevating cab and 4th hydraulic function Industrial straight boom Z1 – 9.10 m Industrial, heavily angled stick – 6.80 m 5-tine grapple Multi-shell grapple 1.10 – 1.70 m³ Highlights ✔ 20-meter working reach ✔ Powerful and reliable Liebherr engine ✔ Hydraulically elevating cab for optimal visibility ✔ Including grapple equipment ✔ CE-certified machine Isdozdb Dqjpfx Aateif ✔ Stable 4-point support ✔ Ready for immediate use ✔ Ideal for scrap, recycling, port, and bulk material handling Ready for Immediate Use The machine is in good working condition and ready for immediate use. For further information, photos, or to arrange a viewing, please do not hesitate to contact us. We speak German We speak English Hablamos Español

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: SIEMENS, controller model: PLC, number of rollers: 4, roller (bottom) diameter: 150 mm, roller (top) diameter: 150 mm, side roll diameter: 140 mm, roller diameter: 150 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 18 mm, working height: 800 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, overall weight: 2,800 kg, total length: 3,800 mm, total width: 1,200 mm, total height: 1,100 mm, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4 ROLL BENDING MACHINE NC HYDRAULIC MODEL 2000X6 MM / 4 MM PREBEND PROGRAMMABLE AUTOMATIC ROLLING NC 4 AXIS CONTROLLER Capacity: plate width 2000 mm thickness rolling 6 mm pre-bending 4 mm Iijdpfjw Hpzwsx Aatef minimum diameter of rolling D= 180 mm depending on the plate thickness and strength Rollers length 2050 mm Upper roll size 150 mm Lower roll size 150 mm Rollers hardened surface high strength smooth surface finishing suitable for rolling stainless steel quality plates Conical plate rolling attachment Rotation electric powered on central rollers for bending traction of the plate Pre-pinch load variable upon plate thickness and strength Console electric commands push buttons with digital readout of the 4 rollers on the screen. NC programmable 4-axis to set automatic rolling with save 200 programs in memory front side hydraulic opening to remove the rolled shells speed slow/fast variable safety installation with emergency stop. Instruction manuals for operation and service. Layout mm 3800x1200xH1100 mm Weight 2800 Kgs

Condition: like new (used), Year of construction: 2010, operating hours: 1,291 h, machine/vehicle number: S0M047-21-2, overall weight: 29 kg, load capacity: 5 kg, arm reach: 895 mm, controller manufacturer: Yaskawa, controller model: NX100, teach pendant manufacturer: Yaskawa, input voltage: 230 V, type of input current: AC, This robot served as a demo robot at DMG Automation. It lived in a magazine and demonstrated the possible assembly of CNC machines. It has Profibus for communication. A gripper can be supplied on request. The robot is practically as good as new and can be used immediately with its 36 hours running time. If required, we can help with commissioning Iisdpjt Dkmgsfx Aatef

Condition: used, 1. Decoiler Brand : SCHLOEMANN Type : Hydraulic expanding decoiler Function : Coil holding and controlled rotation Expansion control : Hydraulic Frame : Welded steel base with integrated brake Estimated capacity : 8–12 tons Coil bore : Ø 508 mm ----- 🔹 2. Straightener / Pinch Roll Manufacturer : COMEC (Société de Constructions Mécaniques de Creil) Type : Pinch roll and leveler Control : Mechanical Order number : 1305.1268 Recommended lubricants : Shell Macoma, Tellus, Alvania (as per nameplate) Function : Feeds and flattens strip before slitting Secondary role : Synchronized strip puller ----- 🔹 3. Slitter Manufacturer : COMEC Type : Circular blade slitting machine Drive : Mechanical gear train Blade adjustment : Manual Ijdjw Dd Igopfx Aatjif Blades installed : ~10 sets (visible) Function : Longitudinal slitting of metal sheets into narrow strips ----- 🔹 4. Shear (End Cropper) Manufacturer : COMEC STAMCO Type : Rotating or inline shear Function : End cropping or final length cut Control panel : Electromechanical (visible on photo) Machine Application Complete line for metal coil slitting, producing narrow strips from master coils, with upstream flattening and final end cutting. Features / Differences – Heavy-duty hydraulic decoiler by SCHLOEMANN – Mechanical straightening section from COMEC – Manual-adjust slitter with circular blades – Outfeed shear for end trimming or final cut-to-length – Older but industrial-grade line, suited for medium gauge materials

Condition: good (used), Year of construction: 2010, Ref. -No.: 10646 Manufacturer: DMG Type: DMU 125 FD duoblock Year of construction: 2010 Type of control: CNC Control: Siemens Sinumerik 840D Storage location: Halberstadt Country of origin: Germany X-Travel: 1250 mm Y-Travel: 1000 mm Z-Travel: 1000 mm NC swivel rotary table: 1250 O Tool Taper: HSK - A100 Numbers Of Tools In Magazin: 40 Spindle Speed: 12000 RPM Main Drive: 44 kW Internal cooling: 40 bar Further information: - Universal milling head with controlled B-axis - Tool changer with horizontal double gripper - Taper cleaning for HSK-A 100 - Safety enclosure - Coolant tank, 600 L - Chip conveyor - Rotating viewing window - 3D path control - Heidenhain TS 649 DMG infrared probe - Siemens 840D electronic handwheel - Flushing gun with pump Iijdpezkpxnjfx Aatsf The machine can be viewed in operation by appointment.

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Brinox LEP 11 – Pharmaceutical Chromatography System with CIP Unit New, unused, original packaging Manufacturer: Brinox Model: LEP 11 Version: PP6711 with associated CIP unit CS6711 Condition: New – unused – original packaging (Factory New Condition) Description For sale is a Brinox LEP 11 pharmaceutical chromatography system, consisting of the chromatography panel PP6711 and the associated CIP unit CS6711. Isdpfx Aeyl Ndnjateif The system is completely new, unused, and in its original packaging. It was designed, manufactured, and delivered, but has never been installed or put into operation. This unit is designed for C1-INH chromatography and is used for controlled protein purification using sieve-bottom vessels in a GMP environment. Process Functions • Transfer of loaded QAE resin (slurry) • Washing and elution processes • Transfer of eluate to pre-precipitation vessel • Gel disposal via container station • Fully automatic CIP and SIP cleaning Technical Data • Fully CIP and SIP capable • Design pressure: –0.9 to +6 bar • Design temperature: +2°C to +95°C • Flow rate up to 10 m³/h • Adjustable slurry transfer 0.2 – 3 m³/h Design Features • Product-contact parts made of stainless steel 1.4435 • Electropolished Ra ≤ 0.8 µm • FDA and EU-compliant seals • Drainable construction • Cleanroom panel with tri-clamp connection points • Magnetically monitored transfer arcs • 0.2 µm vent filter CIP Unit CS6711 • Compact stainless steel skid • Centrifugal pump • Shell-and-tube heat exchanger • Adjustable operating pressure • GMP-compliant design The system is in factory-new condition and has never been used in production.

Condition: used, Used Charles Thompson model CT400 Hastelloy C22 Mobile Agitated Nutsche Filter Dryer Manufacturer: Charles Thompson Limited, UK Model: CT400 Type: Mobile agitated Nutsche filter/dryer Year: 2001 Filter diameter: approx. 400 mm / 15.7 in Filtration area: approx. 0.125 m² / 1.35 ft² Product-contact material: Hastelloy C22 External/jacket: 316L stainless steel Shell design: 3 bar/full vacuum Jacket design: 3 bar/full vacuum Design temperature: -30°C to +100°C ASME: Section VIII Div. 1 (1998) + A99 Empty weight: 570 kg / 1,257 lb Iedpfxezun Hlo Aateif Agitator: single-blade, approximately 0.75 kW Agitator lift: hydraulic raise/lower Configuration: jacketed vessel on mobile stainless frame/casters.