Used Schmees Ladenbau Sales Counter for sale (26,558)

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 3,090 h, load capacity: 2,500 kg, lifting height: 4,900 mm, fuel type: gas, mast type: triplex, construction height: 2,243 mm, drive type: Treibgas, Four-way front forklift Mast type: Triplex Hjdpfx Abewzpmcs Ajnn Condition: Ready for use and fully functional Technical condition: good Side shifter, fork positioner, 3rd valve, 4th valve, heating, road approval (STVZO), full cabin,

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 7,329 h, load capacity: 2,500 kg, lifting height: 6,500 mm, fuel type: electric, mast type: triplex, construction height: 2,800 mm, drive type: Elektro, Four-way front forklift Mast type: Triplex Condition: Ready for use and fully functional Hjdpfx Abjxgyz Eo Aonn Technical condition: good Battery year: 2023 Side shifter, fork positioner, 3rd valve, 4th valve, heater, full cabin,

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, turning diameter: 220 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 240 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 580 mm, No minimum price – guaranteed sale to the highest bidder! The new price of the machine was €342,000! Due to inquiries, the auction has been extended by 2 weeks. TECHNICAL DETAILS Max. bore / max. passage: 220 mm Max. turning diameter: 220 mm Distance spindle nose – tailstock center: 614 mm Hjdpey Ukhhofx Ab Aonn Center distance: 800 mm Travel X1 and X2: 167.5 mm Travel X3: mm Travel Z1 and Z2: 515 mm Travel Z3: 580 mm Travel Y: +45 / -45 mm Rapid traverse X: 30 m/min Rapid traverse Z: 30 m/min Rapid traverse Y: 20 m/min Axis acceleration: 9.8 m/s² Main spindle Max. speed: 4,000 rpm Outer diameter front bearing: 170 mm Inner diameter front bearing: 110 mm Spindle nose: ASA 6" A2 Spindle inner diameter: 72.5 mm Draw tube bore: 66 mm Chuck diameter: 210 mm Chuck bore: 66 mm Spindle power max. / S3 25% / S1: 35.5 / 28.3 / 23.5 kW Spindle torque max. / S3 25% / S1: 205 / 180 / 150 Nm Counter spindle / Sub spindle Max. speed: 4,000 rpm Outer diameter front bearing: 170 mm Inner diameter front bearing: 110 mm Spindle nose: ASA 6" A2 Spindle inner diameter: 72.5 mm Draw tube bore: 66 mm Chuck diameter: 210 mm Chuck bore: 66 mm Power max. / S3 25% / S1: 35.5 / 28.3 / 23.5 kW Torque max. / S3 25% / S1: 205 / 180 / 150 Nm Tailstock / Counter support Morse taper: CM3 Tailstock travel: 580 mm Max. force: 500 kgf Turret / Tool holder Number of stations: 24 Tool cross-section: 20×20 / 25×25 mm Tool change time: 0.1 s Clamping force at 45 bar: 3,200 kgf Driven tools Number of rotary stations: 12 Max. speed: 12,000 rpm Power max. / S1: 14 / 10 kW Max. torque max. / S1: 42 / 32 Nm Liquids / Tanks / Supply Coolant tank, side: 510 l Coolant tank, rear: 330 l Hydraulic oil tank: 18 l Lubricating oil tank: 4 l Installed power: 87 kVA Operating voltage: 400 V, 50 Hz ±5% Optional voltage according to table: [230 V, 50 Hz ±5%] Max. ambient temperature: 35 °C MACHINE DETAILS Control model: FANUC 31iPLUS Dimensions & Weight Dimensions (L x W x H): 2,860 × 2,377 × 2,289 mm Total weight: 11,000 kg Internal volume: 1.7 m³ EQUIPMENT Coolant supply through left spindle Hainbuch AXZUG 65 collet chuck (standard) 2702/0008 for left spindle SMW-Autoblok BBD 175 3-jaw chuck 56 with a set of soft jaws for right spindle Measuring arm Hinged band chip conveyor with side discharge Upper turret station (T1) double high-pressure pump (6+15 bar, 55 l/min) Inner turret station (12) double high-pressure pump (6+15 bar, 55 l/min) Machine status light Automatic part unloader Part unloader with pneumatic opening and closing function for catching ejected parts Pneumatic part ejector for counter spindle with 100 mm stroke, stroke adjustment and end position sensor Unimag interface for bar feeder

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1800005039, travel distance X-axis: 360 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 240 mm, controller model: NUM 1050, swivel angle B-axis (max.): 120 °, No minimum price – guaranteed sale to the highest bidder! The machine is equipped with grinding and eroding functions. The machine was refurbished in 2016. The latest service report for the machine is enclosed. Optionally, a variety of spare parts can also be purchased in addition to the machine. TECHNICAL DETAILS Travel range X-axis: 360 mm Travel range Y-axis: 240 mm Travel range Z-axis: 240 mm Swivel axis B: ±120° Resolution transverse axis X: 0.0001 mm Resolution feed axis Z: 0.0001 mm Resolution vertical axis Y: 0.0001 mm Resolution swivel axis B: 0.0001° Rapid traverse transverse axis X: 10 m/min Hnjdpfx Abjzb Dtps Asn Rapid traverse feed axis Z: 10 m/min Rapid traverse vertical axis Y: 10 m/min Rapid traverse swivel axis B: 6,500°/min MACHINE DETAILS Control: NUM 1050 Connection power without robot: 13 kVA Compressed air supply: 6 bar Compressed air connection diameter: 11 mm Operating hours (according to counter): 4,550 h EQUIPMENT Electrostatic filter system Documentation Note: The machine has contamination (oil stain) on the glass level gauge. Therefore, a complete on-site test is currently not possible.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 43,196 h, functionality: fully functional, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, controller model: Fanuc 310 is, spindle speed (max.): 5,000 rpm, counter spindle speed (max.): 5,000 rpm, No minimum price – guaranteed sale to the highest bidder! CNC turning center with comprehensive accessories! A wide range of like-new spare parts is also available! TECHNICAL DETAILS Travel X1 axis: 165 mm Travel X2 axis: 165 mm Travel Y1 axis: 80 (+50 / -30) mm Travel Z1 axis: 678 mm Travel Z2 axis: 640 mm Travel W2 axis: 690 mm Rapid traverse X/Y/Z/W axis: 30 m/min Acceleration X/Y/Z/W axis: 5 m/s² Main and counter spindle Power main spindle: 20 / 25 kW Power counter spindle: 17 kW Speed main spindle max.: 5,000 rpm Speed counter spindle max.: 5,000 rpm Bar diameter main spindle max.: 65 mm Bar diameter counter spindle max.: 45 mm Number of turrets: 2 Number of rotating tools per station: 12 driven positions Tool system: VDI 30 Speed driven tools: max. 4,000 rpm MACHINE DETAILS Control: Fanuc 310 is Coolant tank capacity: approx. 650 l Coolant pump capacity per turret: max. 20 l/min Pump pressure: 7 bar Connected power: 91 kVA Dimensions & Weight Hnedsza Alhjpfx Ab Aon Machine dimensions (L x W x H): 4,500 x 1,990 x 2,300 mm Machine weight: approx. 9,500 kg Operating hours Power-on hours: 64,274 h Operating hours: 43,196 h EQUIPMENT IEMCA MASTER 865 MP 43 L bar loader Drive for slides 1 and 2, all 12 positions C-axis for main and counter spindle Y-axis for slide 1 Chip conveyor, belt type Counter spindle collet cleaning with coolant Workpiece discharge including belt Mechanical preparation for oil mist filter Electrical and software interface for bar loader Angular synchronization between main and counter spindle Automatic machine shutdown 2 additional inputs/outputs, 4 M-functions Thread drilling without compensation chuck Piece and time counter Software for polygonal turning for slides 1 and 2 Constant cutting speed Helical interpolation for slide 1 Spindle speed monitoring Four-color warning light Cooling unit for control cabinet Collet chuck type MPF 65/140 without axial feed for main spindle, max. diameter 65 mm Manual collet changer type SACO MPT65/140 and MPF65/140 Differential pressure for counter spindle with the possibility of setting two different clamping pressures 1 set of soft jaws for collet chuck type SMW 175-BBD Collet chuck type SMW 175-BBD for counter spindle including adapter for spindle adjustment Tool wear monitoring system for CNC FANUC Sister tool selection system for Tool Monitor CNC FANUC External flushing of jaws and collets with coolant on main and counter spindle

Condition: excellent (used), INFICON Sensistor ISH2000 Hydrogen Leak Detection System Manufacturer: INFICON Type: Sensistor ISH2000 Article number: 590-750 Device type: Hydrogen leak detector Description Professional hydrogen leak detection system consisting of the INFICON Sensistor ISH2000, INFICON TGF10 tracer gas filler, and AP57 search probe. The system is used for industrial leak testing using the hydrogen tracer gas method. Technical data Power supply: 100 - 240 VAC Frequency: 50 / 60 Hz LCD display Printer port Probe control port TGF10 Tracer Gas Filler Tracer gas pressure: 0 - 9 bar Compressed air supply: 4 - 8 bar Evacuation rate: 70 Nl/min Filling rate: 600 Nl/min Ultimate vacuum: -0.85 bar Weight: approx. 4.7 kg Equipment Hedpfszdggwox Ab Ajnn Sensistor ISH2000 TGF10 Tracer Gas Filler AP57 Counter Flow Probe Connection cable Power cable Original packaging Accessories as shown in the pictures Application areas Leak testing of pipelines Heat exchangers Pressure vessels Refrigeration and air conditioning components Automotive industry Industrial and testing systems Condition Used Optical condition as shown in the pictures Display active Normal storage and usage marks present Scope of delivery as shown in the pictures. Changes and errors in the technical data as well as prior sale are reserved.

Condition: used, - Serial number: 10114243 - 2 levels, 5/10 trays, 400x600 mm - Year: 04-2007 - Model: Haube.SC - Programmable digital control panel Hedpfx Abjyabi So Aenn - LED lighting - 8-speed ventilation - Steam injection - Steam function - Voltage: 230V - Refurbished equipment: The equipment is reconditioned upon order; lead times for servicing and delivery are agreed upon at that time (please inquire for the post-refurbishment price) - Professional convection oven Wiesheu is widely used for baking all types of bakery products: bread rolls, croissants, cookies, etc. The Wiesheu Euromat is a classic convection oven featuring intelligent controls. The steam system ensures baked goods with a golden, crisp and highly appetizing crust. Furthermore, this oven can serve as an attractive centerpiece for any pastry shop, bakery, or retail counter thanks to its appealing design, while the visibility of the baking process helps increase sales of all products. - Optimal air distribution ensures uniform baking results in the hot air oven. HUMIDIFICATION: Rapid steam generation with the right amount of moisture for each type of pastry.

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 620 mm, travel distance Z-axis: 2,000 mm, bar diameter (max.): 110 mm, controller manufacturer: SIEMENS, controller model: 840C, number of axes: 3, Horizontal turning machine manufactured in 1997. This BOEHRINGER VDF 400 CM features a maximum chuck diameter of 500 mm, an X-axis travel of 620 mm, and a Z-axis travel of 2000 mm. It is equipped with a live tool for enhanced functionality. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER VDF 400 CM machine we have for sale. Contact us for further details. • Chuck: 500 mm Hjdpfx Abjy Enyio Aenn Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 405 mm, travel distance Z-axis: 2,049 mm, bar diameter (max.): 80 mm, controller manufacturer: SIEMENS, controller model: 840C, number of axes: 3, Horizontal turning machine manufactured in 1997. This BOEHRINGER VDF 315 CM features a maximum turning length of 2,049 mm and a chuck diameter of 400 mm. It is equipped with live tools for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER VDF 315 CM machine we have for sale. Contact us for further details. • Chuck diameter: 400 mm Technical Specification Counter Spindle No Driven Tools Yes Hsdpfx Asy Enqnjb Aenn

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 620 mm, travel distance Z-axis: 2,000 mm, bar diameter (max.): 110 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 3, Horizontal turning machine manufactured in 2007. This BOEHRINGER VDF 400 CM features a 500 mm chuck and a live tool for enhanced versatility. It offers an impressive X-axis travel of 620 mm and Y-axis travel of 2000 mm. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER VDF 400 CM machine we have for sale. Contact us for further details. Hnjdpfx Asy Enllob Ajn • Chuck diameter: 500 mm Technical Specification Driven Tools Yes Counter Spindle No

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 405 mm, travel distance Z-axis: 2,049 mm, bar diameter (max.): 80 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 3, Horizontal turning machine manufactured in 2007. This BOEHRINGER VDF 315 CM features a maximum turning length of 2,049 mm and a turning diameter of 400 mm. It is equipped with a live tool for enhanced machining capabilities. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER VDF 315 CM machine we have for sale. Contact us for further details. • Chuck size: 400 mm Technical Specification Counter Spindle No Driven Tools Yes Hnodpfxjy Enhas Ab Asn

Condition: ready for operation (used), Year of construction: 2000, spindle speed (max.): 8,000 rpm, bar diameter (max.): 26 mm, number of axes: 7, This 7-axis Maier ML 26 C1 was manufactured in 2000. It features a maximum bar diameter of 26 mm and an impressive spindle speed of 8000 rpm. The machine includes 5 turning tools and 3 axial drilling tools, along with a bar feeder model Iemca Boss 322r-E. If you are looking to get high-quality turning capabilities, consider the Maier ML 26 C1 swiss type turning machine we have for sale. Contact us for further details. • Axis Head 1: • Axes: X, Y, Z, C • Z1 axis travel: 210 mm • Main spindle collet: 161E • Guide bushing: T227 • Tooling: 5 turning tools (16 mm), 3 axial drilling/boring tools, 3 ER16 live tools (up to 8000 rpm) • Axis Head 2: • Axes: X, Z, C • Sub-spindle speed: up to 8000 rpm • Sub-spindle collet: 161E • Back-working: 4 tools (currently set up with 1 turning tool and 3 ER16 live tools), plus 1 ER16 live tool axial with the sub-spindle • Maintenance (2025–2026): • Replaced all pneumatic lines with new, durable lines • Replaced position sensors in main spindle mechanical lock • Replaced position sensors in sub-spindle mechanical lock • Replaced position sensors in sub-spindle work ejector • Mechanical realignment and measurement of main spindle, guide bushing, and sub-spindle • Realigned sub-spindle frame assembly and sub-spindle back-working tools • Replaced all spindle bearings in sub-spindle assembly • Replaced spindle bearings in sub-spindle axial milling tool • Refurbished live milling tools on sub-spindle side Additional equipment • Bar feeder: Iemca Boss 322r-E, model year 2007, 17 mm guide channels Technical Specification Hnsdpfozdr H Ijx Ab Ajn Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2019, spindle speed (max.): 4,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 406 mm, spindle motor power: 14,900 W, number of axes: 2, Horizontal turning machine manufactured in 2019. This HAAS ST 15 features a maximum cutting diameter of 356 mm and a cutting length of 406 mm. It includes a 12-station VDI turret and a hydraulic chuck diameter of 210 mm. If you are looking to get high-quality turning capabilities, consider the HAAS ST 15 machine we have for sale. Contact us for further details. • CNC Control: HAAS Next Generation Control (NGC) • Max cutting diameter: 356 mm • Max cutting length: 406 mm • Max bar capacity: 63.5 mm • Max swing diameter: 419 mm • Max spindle speed: 4,000 rpm • Spindle nose: A2-6 • Hydraulic chuck diameter: 210 mm • Spindle motor power: 14.9 kW (20 hp) Hnodpfezdrhlex Ab Aen • Turret type: 12-station VDI • X/Z axis rapids: 30.5 m/min Additional equipment • Automatic tool probe (tool setter) • Tailstock with hydraulic quill • Belt-type chip conveyor • Coolant system with tank and pump Technical Specification Counter Spindle No Driven Tools No

Condition: used, mileage: 179,000 km, power: 77 kW (104.69 HP), first registration: 06/2018, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,600 mm, Equipment: ABS, air conditioning, central locking, soot filter, Chat now via WhatsApp: Quick & easy contact with our sales advisor. Attention! Preferential sale to commercial customers. Internal ID number: [3271] ---- Optional services available: * 12 to 64 months warranty (valid across the EU) * New inspection * New roadworthiness test (TÜV) & emissions test (AU) * Nationwide delivery * Financing possible without down payment * Trailer coupling/reversing camera can be retrofitted upon request * Spring Special: Upon request and for an additional charge of only €999, increase of towing capacity up to 3,500 kg (vehicle and manufacturer dependent). ---- Vehicle Highlights: * 19% VAT deductible * German specification vehicle * Regularly serviced * Immediately operational * Accident-free * Euro 6 emissions standard * Cruise control * Trailer coupling: 2,800 kg * Air conditioning * Comfort seat * Bluetooth multimedia * Reversing camera * LED daytime running lights Special equipment: Passenger airbag, Express Line package, LED cargo compartment light, tire repair kit, reversing camera with color display, visibility package 1 Further equipment: 3rd brake light, overhead storage in cab, driver’s airbag, traction control (ASR), audio system: radio/CD player with multifunction display, electrically adjustable and heated exterior mirrors, indicators integrated into exterior mirrors, onboard computer, headliner covering in passenger compartment, rev counter, electronic brakeforce distribution (EBD), electronic differential lock (EDS), assistance system: hill-start assist, emergency braking assist system, 165 A alternator, B-pillar grab handle, rear wing doors without glazing (opening angle 180 degrees), recirculation heating, interior filter: pollen filter, body/conversion: high roof panel van standard, body variant: medium high roof, silver radiator grille, high partition behind driver and passenger, steering column (steering wheel) adjustable for height and reach, headlight range adjustment, truck registration, engine 2.0 L - 77 kW TDCi CAT, parking pilot system front and rear, production plant: Otosan, wheelbase 3300 mm, full wheel covers, low-emission according to Euro 6 standard, right side sliding door (cargo/passenger area), wide side protection strips (side panelling), seat package 13: driver’s seat (4-way adjustable) - front double passenger seat, fabric upholstery, 1st row seating in cargo/passenger area: 3-seat bench, steel rims 6.5x16, partially painted bumpers, Trend, integrated rear step, tinted windows, second key with folding remote ---- Interested in leasing or financing? We offer attractive deals – even without down payment! Feel free to contact us. Contact: Phone: Hnsdey Rdcqjpfx Ab Ajn Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon–Fri: 9:00 am – 6:00 pm Sat: 9:00 am – 2:00 pm ---- Notice: All information provided online is non-binding and for general vehicle description only. Errors, typographical mistakes, and prior sale excepted. The definitive condition of the vehicle is determined exclusively by the onsite purchase contract or by written confirmation. Vehicles with a mileage over 50,000 km or older than 3 years are preferably sold to our commercial customers.

Condition: used, mileage: 49,990 km, power: 125 kW (169.95 HP), first registration: 08/2019, fuel type: diesel, color: white, gearing type: mechanical, emission class: euro6, number of seats: 7, total length: 7,600 mm, loading space length: 4,300 mm, loading space width: 2,150 mm, Equipment: ABS, air conditioning, central locking, soot filter, Chat with us now via WhatsApp: Get in touch quickly and easily with our sales consultant. Please note!!! Sales are preferably made to commercial customers. Internal ID number: [3341] ----Optional extras: * 12-64 months warranty (valid throughout the EU) * New inspection * New TÜV (German vehicle inspection) & emissions test * Nationwide delivery * Financing is possible, even without a down payment * Spring offer: Upon request and for an additional charge of only €999, increase the towing capacity to up to 3,500 kg (vehicle and manufacturer dependent). ----Vehicle highlights: * German vehicle * Regularly maintained * Immediately ready for use * Euro 6 standard * Dimensions of the cargo bed: Length: 4,300 mm / Width: 2,150 mm, Overall length: 7,600 mm * Trailer coupling: 3,500 kg * Double cab with 7 seats * Air conditioning * Cruise control * Comfort seat * Bluetooth multimedia system * Rear view camera Special equipment: Airbag for passenger side, Exterior mirrors with long support arm, Driving Assistance System: Lane Keeping Assist with Fatigue Detection Sensor, Configuration with specific central locking, Visibility Package 1 Additional equipment: 2nd battery, Storage compartment in the headliner of the driver's cab, Airbag for driver side, Anti-Slip Regulation (ASR), Audio/radio remote control on the steering wheel, Audio system: Radio/CD player with multi-function display, Turn indicator integrated into exterior mirror, On-board computer, Roof lining in the passenger compartment, Rev counter, Electronic brake-force distribution (EBD), Electronic differential lock (EDS), Driving Assistance System: Hill Start Assist, Driving Assistance System: Emergency Brake Assist, Driving Assistance System: Side Wind Assist, Digital tachograph, Generator 165 A, Heating with recirculating air function, Isofix mounts for child seat, Body/structure: Wide cargo bed, Body/structure: Double cab cargo bed standard, Steering column (steering wheel) adjustable in height/length, Headlamp range adjustment, Engine 2.0 Ltr. - 125 kW TDCi CAT, Production site: Otosan, Wheelbase 3954 mm, Extended frame, Spare wheel in driving condition, Low emission according to exhaust standard Euro 6, Headlamp assistant with day/night sensor, Seat package 4: Driver's seat (4-way adjustable) - Passenger double seat, Fabric, Seats in cargo/passenger compartment: 1st row, 4-seater bench, Steel rims 6.5x16, Front panel extension aluminum cargo bed, Bumper partially painted, Tinted glazing, Heat-insulating glazing for cargo/passenger compartment, medium tint, Twin tires on 2nd axle/rear axle Hodsy Rhdfspfx Ab Ajnn ----Would you like to lease or finance? We offer attractive deals – even without a down payment! Feel free to contact us. Contact: Phone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln - Germany Opening hours: Mon-Fri: 9:00 a.m. - 6:00 p.m. Sat: 9:00 a.m. - 2:00 p.m. ----Note: All information on the internet is non-binding and serves only as a general description of the vehicle. Errors, typos and prior sale are reserved. The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances. Vehicles with a mileage of over 50,000 km or older than 3 years are preferably sold to our commercial customers.

Condition: ready for operation (used), Year of construction: 2000, spindle speed (max.): 4,000 rpm, travel distance X-axis: 410 mm, travel distance Z-axis: 280 mm, spindle motor power: 30,000 W, overall weight: 6,800 kg, number of axes: 2, Horizontal turning machine manufactured in 2000. This Monforts RNC 400 AC features a turning length of 600 mm and a swing over bed of 410 mm. It is equipped with a 12-station disc turret and a maximum spindle speed of 4000 rpm. If you are looking to get high-quality turning capabilities, consider the Monforts RNC 400 AC machine we have for sale. Contact us for further details. • CNC memory: 256 kB (buffered RAM), expandable to 1.5 MB • Programming language: DIN 66 025 with high-level language extensions • Swing over bed: 410 mm • Swing over cross slide: 280 mm • Turning length: 600 mm • Spindle bearing diameter: 130 mm • Spindle nose: DIN 55026 A6 • Material clearance (bar capacity): 65 mm • Max. torque: 500 Nm • Axes/feeds: AC servo drives with electronic safety monitoring; rapid traverse X/Z 24/24 m/min; feed force X/Z 7.2/10.7 kN • Turret: 12-station disc turret (DIN 69880/VDI 3425/2), 40 mm shaft diameter • Driven tools: 12 stations; max power 13.6 kW (25% ED); max torque 28.9 Nm; max speed 4500 rpm • C-axis: 0–25 rpm; 300 Nm holding torque • Tailstock: Separate guide rail; manual clamping; 900 mm travel; 90 mm quill stroke; 12,000 N force (adjustable); MT3 • Hydraulic system: Central pressure oil supply for hydrostatics and clamping • Cooling: 310 L tank; reinforced coolant pump (3 bar, 40 L/min) • Bed: 60° slant bed; steel welded construction on reinforced concrete base with 3-point support • Power requirements: 3x400 V, 50 Hz; total connected load 20.5 kW (41 kVA) Additional equipment • Hydraulic hollow clamping device • Parts catcher • A6 drawtube for collet chuck Hodpfx Aey Ifptob Asnn • 200 mm suction nozzle • 1 GB storage expansion • Network card • Driven tools with tapping without compensation chuck Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2025, spindle speed (max.): 2,500 rpm, travel distance X-axis: 510 mm, travel distance Z-axis: 300 mm, spindle motor power: 15,000 W, overall weight: 3,000 kg, number of axes: 2, Horizontal turning machine manufactured in 2025. This STYLE 510 (1350) features a swing over bed of 510 mm and a distance between centers of 1,350 mm, accommodating workpieces up to 600 kg. It includes an 8-position automatic VDI-40 turret and a powerful 15 kW spindle with a maximum speed of 2,500 rpm. If you are looking to get high-quality turning capabilities, consider the STYLE 510 (1350) machine we have for sale. Contact us for further details. • Swing over bed: 510 mm • Swing over support: 300 mm • Distance between centers: 1,350 mm • Max workpiece weight between centers: 600 kg • Max workpiece weight with steady rest: 1,150 kg • Spindle bore: 80 mm • Gearbox: 3-speed • Tool changer: 8-position automatic VDI-40 turret • Control unit: STYLE CNC (19" touchscreen, G-code/Fanuc compatible) • Working time: 18 h 59 min Hnsdpszdiz Aofx Ab Asn • Cutting time: 14 h 21 min • Automatic operation time: 16 h 31 min Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2012, operating hours: 75,685 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 85 mm, travel distance Z-axis: 280 mm, spindle motor power: 20,000 W, number of axes: 7, This 7-axis Index ABC horizontal turning machine was manufactured in 2012. It features a main spindle with a maximum speed of 6000 rpm and a sub spindle with a speed of 4500 rpm. The machine includes two turrets, each equipped with X and Z axes, and a powerful tool drive. If you are looking to get high-quality turning capabilities, consider the Index ABC machine we have for sale. Contact us for further details. • Main spindle: D65, spindle interface AD140, ID83, max speed 6000 rpm; max power 20 kW at 100% duty cycle; C-axis; electronic synchronization between spindles • Sub spindle: 7.5" chuck interface, max speed 4500 rpm • Spindle hours: • S1 – 18914h • S2 – 661h • S3 – 3h • S4 – 29211h • S5 – 2413h • S7 – 1250h • Chuck: 3-jaw KFN95/3, clamping force 480 daN, max 4000 rpm • Turrets: two turrets each with X and Z axis; tool drive on turret 6000 rpm, 3.3 kW • Rear working attachment: without quill, 5 quill positions • Coolant: 80 l/min at 8 bar and 20 l/min at 18 bar; system prepared for emulsion; coolant return at spindle end D60 (without bar feed) • Control: INDEX C200-4D based on Siemens 840D; color display 26 cm; thread cutting without compensating chuck; motor-current-based tool monitoring; internal tool management and setup dialog; extended machining cycles; parts counter and production monitoring • Power/connection data: 400 V, 50 Hz TN network; total connected load 45 kVA; rated power 38 kW; rated current 65 A; max fuse protection 100 A • Hydraulic hollow clamping cylinder D65 Additional equipment • Chip conveyor: hinged belt, discharge height 1250 mm Hedpfx Aboy Sg Das Aonn • Bar feeder: MBL 65/3700 for spindle height 1010 mm; bar diameters up to 65 mm; bar feeder length 3700 mm; guide channel system with rolling bearings; loading rods (Ø12 mm and Ø20 mm, length 1400 mm); guide sets for 14–18 mm, 18–22 mm, 22–65 mm • Workpiece unloading device for main and sub spindle with part catcher • Teleservice preparation (ISDN) with software • Machine prepared for extraction system 230 V • Working area light • Two electrical cabinet cooling units • Transformer 3 kVA Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, mileage: 9,900 km, power: 88 kW (119.65 HP), first registration: 06/2021, fuel type: diesel, overall weight: 3,000 kg, color: white, gearing type: mechanical, emission class: euro6, total length: 5,300 mm, Equipment: ABS, air conditioning, central locking, soot filter, Chat now via WhatsApp: Get in touch quickly and easily with our sales consultant. Attention!!! Sales preferably to commercial businesses. Internal ID number: [ 3389 ] ----Optional extras: * 12-64 months warranty (valid throughout the EU) * New inspection * New TÜV (German vehicle inspection) & emissions test * Nationwide delivery * Financing possible even without a down payment * Spring offer: Upon request and for an additional charge of only 999 €, increase the trailer load to up to 3,500 kg (vehicle and manufacturer dependent). ----Vehicle highlights: * 19% VAT can be shown * Regularly maintained * German vehicle * Immediately ready for use * Euro 6 standard * Accident-free * Long wheelbase * Air conditioning system * Rear view camera * Bluetooth multimedia system * 3 seats * LED headlights Special equipment: Visibility package, Mobile Office Package 1, wheel covers, trim in the cargo/passenger compartment Additional equipment: Airbag for driver, Anti-Slip Regulation (ASR), Exterior mirror, electrically adjustable and heated, Battery 85 Ah, On-board computer, Rev counter, Automatic activation of headlights, Deletion of keyless entry, Glove compartment with cooling function, Rear wing doors without glazing, Interior filter: pollen filter, Body/structure: standard van, Fuel tank: 80 liters, Steering column (steering wheel) adjustable, Model revision, Engine 2.0 L - 88 kW dCi Diesel Energy, Rear fog lamp, Radio preparation, Wheelbase 3498 mm, Tire repair kit, Low emissions according to exhaust standard Euro 6d-TEMP, Sliding door cargo/passenger compartment right, Seat cover / upholstery: fabric, Seats in the driver's cab: driver's seat comfort, 3-way adjustable, Start/stop system, Daytime running lights LED, Lashing eyes in the cargo area on the side, Pre-wiring for electrical equipment, Heat-insulating glazing ----Do you want to lease or finance? Hodpfxjzbzd Ss Ab Asnn We offer attractive offers - even without a down payment! Feel free to contact us. Contact: Phone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln - Germany Opening hours: Mon-Fri: 9:00 a.m. - 6:00 p.m. Sat: 9:00 a.m. - 2:00 p.m. ----Note: All information on the internet is non-binding and serves only for the general description of the vehicle. Errors, typos and prior sale are reserved. The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances. We prefer to sell vehicles with a mileage of over 50,000 km or older than 3 years to our business customers.

Condition: used, mileage: 49,000 km, power: 85 kW (115.57 HP), first registration: 07/2014, fuel type: diesel, overall weight: 2,700 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 5,000 mm, Equipment: ABS, air conditioning, central locking, soot filter, Chat with us now via WhatsApp: Get in touch quickly and easily with our sales consultant. Please note: Sales are preferably made to commercial customers. Internal ID number: [ 3383 ] ----Optional extras: * 12-64 months warranty (valid throughout the EU) * New inspection * New TÜV (technical inspection) & emissions test * Nationwide delivery * Financing possible, even without a down payment * Spring offer: Upon request and for an additional charge of only €999, increase the trailer load to up to 3,500 kg (vehicle and manufacturer dependent). ----Vehicle highlights: * 19% VAT can be shown * Regularly maintained * German vehicle * Ready for immediate use * Second owner * Accident-free * Air conditioning * Reversing camera * Bluetooth multimedia system * 3 seats * Load compartment with wooden lining Special equipment: Audio system: Radio with Bluetooth and Plug & Music, Keyless-Entry removed, Wooden floor in the load compartment, Load compartment partition with pass-through option, Wheel covers, Spare wheel with road tires, Seats in the cab: Double passenger seat that can be converted, Trim in the cargo/passenger compartment Additional equipment: Hnodpfxszbzdfs Ab Ajn Driver's side airbag, Exterior mirrors electrically adjustable and heated, Battery 85 Ah, On-board computer, Rev counter, Automatic activation for headlights, Rear wing doors without glazing, Interior filter: Pollen filter, Body/Structure: Standard van, Fuel tank: 80 liters, Steering column (steering wheel) adjustable, Engine 1.6 L - 85 kW dCi Diesel, Rear fog lamp, Wheelbase 3098 mm, Low emission according to emission standard Euro 5, Sliding door cargo/passenger compartment right, Seat cover/upholstery: Fabric, Seats in the cab: Driver's seat comfort, 3-way adjustable, Lashing eyes in the load compartment on the side, Lashing eyes in the load compartment floor, Preparation for electrical superstructures, Heat-protective glazing ----Do you want to lease or finance? We offer attractive deals - even without a down payment! Feel free to contact us. Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln - Germany Opening hours: Mon-Fri: 9:00 a.m. - 6:00 p.m. Sat: 9:00 a.m. - 2:00 p.m.----Note: All information on the internet is non-binding and serves only as a general vehicle description. Errors, typing errors and prior sale are reserved. The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances. Vehicles with a mileage of over 50,000 km or older than 3 years are preferably sold to our business customers.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 9,271 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 510 mm, spindle motor power: 15,000 W, overall weight: 2,750 kg, controller manufacturer: FANUC, controller model: i Series, number of slots in tool magazine: 12, number of axes: 3, Horizontal turning machine manufactured in 2017. This DOOSAN LYNX 2100MA features a maximum turning diameter of 300 mm and a turning length of 510 mm. It is equipped with a 12-station drum turret and driven tools, providing versatility in machining. If you are looking to get high-quality turning capabilities, consider the DOOSAN LYNX 2100MA machine we have for sale. Contact us for further details. • Maximum turning diameter: 300 mm • Maximum turning length: 510 mm • Swing over bed: 600 mm Hodpfxszc Iy Ne Ab Aenn • Bar capacity through spindle: 51 mm • Spindle bore: 61 mm • Spindle nose: A2-5 • Rapid traverse X / Z: 30 / 36 m/min • C-axis resolution: 0.001° • Turret: 12-station drum turret with driven tools • Driven tool speed: 6,000 rpm • Driven tool motor power: 3.7 kW • Tool shank size: 20 × 20 mm • Boring bar shank diameter: 32 mm • Chuck size: 6" hydraulic chuck • Tailstock quill diameter: 65 mm • Tailstock quill taper: MT4 • Tailstock quill stroke: 80 mm • Total parts counter: 393,105 pcs (control counter) • Cutting time: 9,271 h Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 250 mm, travel distance Z-axis: 760 mm, overall weight: 2,100 kg, controller manufacturer: FAGOR, controller model: CNC 8055 TC, number of axes: 2, Horizontal turning machine manufactured in 2014. This BUFFALO Microturn BNC 446 features a maximum turning diameter of 250 mm and a turning length of 750 mm. It includes a tool turret with 8 stations and a spindle bore of 54 mm. If you are looking to get high-quality turning capabilities, consider the BUFFALO Microturn BNC 446 machine we have for sale. Contact us for further details. • Maximum Turning Diameter: 250 mm • Turning Length: 750 mm • Spindle Bore: 54 mm • Spindle Type: Horizontal • Operating Hours: Approx. 2,000 – 3,000 h • Condition: Good • CE Marking: Yes • Power Supply: 3 Phase + PE • Voltage: 400 V • Frequency: 50 Hz • Connected Load: 15 kVA • Rated Current: 25 A • Maximum Load Current: 25 A • Short-Circuit Protection: 25 kA Optional: Hedpfx Aezc Ih Heb Aenn • Chuck: Schunk ROTA-S Plus 2.0 200-52 • Tailstock: MK4 • Tool Turret: 8 Stations • Turret Positions: 8 Technical Specification Through-spindle Coolant No Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2012, spindle speed (max.): 7,000 rpm, travel distance X-axis: 70 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 250 mm, spindle motor power: 22,000 W, controller manufacturer: INDEX, controller model: C200-4D Control, number of axes: 9, This 9-axis Index C100 was manufactured in 2012. It features a robust cast iron machine frame and a powerful main spindle with a maximum speed of 7000 rpm and a bar diameter of 42 mm. The machine includes three turrets with live tools, offering versatile machining capabilities. If you are looking to get high-quality turning capabilities, consider the Index C100 horizontal turning machine we have for sale. Contact us for further details regarding this machine. Hodpfxozcykgj Ab Ajnn - Machine Frame: Cast iron machine frame in vertical bed design- Tool Carrier Guides: Plate guides with high level of rigidity and dampening- Axis Drives: Double-scissor kinematics for tool carriers; AC synchronous drive technology- Headstock Design: Thermo-symmetrical design- Main Spindle (D42): Spindle head size 5 (DIN 55026 and ISO 702), max. bar diameter 42 mm, max. speed 7000 rpm, front bearing diameter 75 mm- Main Spindle Power: 22/29 kW (at 100%/40% duty cycle)- Main Spindle Torque: 50/65 Nm (at 100%/40% max.)- Main Spindle Clamping Cylinder: Hollow clamping cylinder D42/14 for collet or chuck clamping, hydraulic operation, stroke 12 mm, clamping pressure 8/80 bar, max. thrust 34 kN, max. pull 34 kN- C-Axis Drive (Main & Counter Spindle): Hollow shaft motor, angular gauging system on spindle, resolution 0.00014 degrees, repeatability scatter Psmax = 0.01 degrees- Main Spindle Clamping Unit: Single pressure clamping unit, adjustable from 8 to 75 bar- Counter Spindle (D42): Spindle head size 5 (DIN 55026 and ISO 702), max. bar diameter 42 mm, max. speed 7000 rpm, collet chuck diameter 110 mm, front bearing diameter 75 mm- Counter Spindle Power: 16.5/19 kW (at 100%/40% duty cycle)- Counter Spindle Torque: 32/43 Nm (at 100%/40% max.)- Counter Spindle Slides (Z-axis): AC motor and ball screws drive, working travel 500 mm, rapid traverse 60 m/min, acceleration 10 m/s^2, feed thrust 3000 N- Counter Spindle Clamping Cylinder: Hollow clamping cylinder D42/14, hydraulic operation, stroke 12 mm, clamping pressure 8/80 bar, max. thrust 34 kN, max. pull 34 kN- Counter Spindle Clamping Device: Single pressure clamping device, adjustable from 8 to 75 bar- Tool Carrier 1: X-axis travel 70 mm (rapid 30 m/min, acc. 9 m/s^2, feed force 3000 N); Z-axis travel 250 mm (rapid 60 m/min, acc. 9 m/s^2, feed force 3000 N); Y-axis travel 70 mm (rapid 15 m/min, acc. 5 m/s^2, feed force 3000 N). Turret 1 with 10 stations, parallel shank mountings D25x48 (DIN 69880), live tools on all stations (Power 4.2 kW, Torque 11 Nm, max. speed 8000 rpm)- Tool Carrier 2: X-axis travel 70 mm (rapid 30 m/min, acc. 9 m/s^2, feed force 3000 N); Z-axis travel 400 mm (rapid 60 m/min, acc. 9 m/s^2, feed force 3000 N); Y-axis travel 70 mm (rapid 15 m/min, acc. 5 m/s^2, feed force 3000 N). Turret 2 with 10 stations, parallel shank mountings D25x48 (DIN 69880), live tools on all stations (Power 4.2 kW, Torque 11 Nm, max. speed 8000 rpm)- Tool Carrier 3: X-axis travel 125 mm (rapid 30 m/min, acc. 10 m/s^2, feed force 3000 N). Turret 3 with 10 stations, parallel shank mountings D25x48 (DIN 69880), live tools on all stations (Power 4.2 kW, Torque 11 Nm, max.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 19,295 h, spindle motor power: 10,700 W, spindle speed (max.): 8,000 rpm, overall weight: 6,000 kg, total width: 2,500 mm, total height: 2,600 mm, bar diameter (max.): 32 mm, travel distance X-axis: 140 mm, controller manufacturer: TRAUB, controller model: TX 8i-p, product length (max.): 4,500 mm, number of axes: 7, This 7-axis TRAUB TNL 32 P was manufactured in 2012. It features a maximum bar diameter of 32 mm and a maximum Z-axis travel of 305 mm. The machine includes two turrets with live tooling capabilities, offering 10 and 9 tool stations respectively. If you are looking to get high-quality turning capabilities, consider the TRAUB TNL 32 P swiss type turning machine we have for sale. Contact us for further details. • Number of Turrets: 2 • Maximum Z-Axis Travel: 305 mm • Main Spindle Torque: 21 / 32 Nm • Main Spindle C-Axis Resolution: 0.001° • Turret 1 Tool Stations: 10 • Turret 1 Live Tool Stations: 10 • Turret 1 Live Tool Speed: 12,000 rpm • Turret 1 Live Tool Power: 1.5 / 2.5 kW • Turret 1 Tool Holder Diameter: 45 mm • Turret 1 Turning Tool Shank: 16 x 16 mm • Turret 1 X-Axis Travel: 140 mm Hodpezcyhxefx Ab Ajnn • Turret 1 Z-Axis Travel: 305 mm • Turret 1 H-Axis Resolution: 0.001° • Turret 1 Chip-to-Chip Time: 0.3 sec • Turret 2 Tool Stations: 9 • Turret 2 Live Tool Stations: 9 • Turret 2 Live Tool Speed: 12,000 rpm • Turret 2 Live Tool Power: 1.5 / 2.5 kW • Turret 2 Tool Holder Diameter: 45 mm • Turret 2 Turning Tool Shank: 16 x 16 mm • Turret 2 X-Axis Travel: 140 mm • Turret 2 Y-Axis Travel: -25 / +40 mm • Turret 2 Z-Axis Travel: 320 mm • Turret 2 Chip-to-Chip Time: 0.3 sec • Counter Spindle Speed: 8,000 rpm • Counter Spindle Power: 1.5 / 2.5 kW • Counter Spindle Torque: 4.5 / 7.7 Nm • Counter Spindle C-Axis Resolution: 0.001° • Maximum Clamping Length: 250 mm • Maximum Bar Diameter (Counter Spindle): 32 mm • Back Working Tool Stations: 8 • Back Working Live Tool Stations: 3 • Back Working Live Tool Speed: 12,000 rpm • Back Working Live Tool Power: 1.5 / 2.5 kW • Back Working Tool Holder Diameter: 36 mm • Rapid Traverse (X / Y / Z): 20 / 20 / 20 m/min • Maximum Feed Rate: 20,000 mm/min • Total Power Requirement: 46 kW • Space Requirement incl. Bar Feeder: 8,000 x 2,500 x 2,600 mm • Chip Conveyor: Optional, not included • Coolant System: Yes • Tool Turrets: 2 • Back Working Unit: Yes • Bar Feeder Interface: Yes • Bar Feeder: LNS Hydrobar Express 332 S2 / 3 m • Electronic Handwheel: Yes • Hydraulic Unit: YesMachine defects: The counter spindle is currently unusable due to prolonged inactivity. Either the sensor or the motor is defective. Technical Specification Counter Spindle Yes Driven Tools Yes Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2001, spindle speed (max.): 4,000 rpm, travel distance X-axis: 410 mm, travel distance Z-axis: 280 mm, spindle motor power: 30,000 W, overall weight: 6,800 kg, number of axes: 2, Horizontal turning machine manufactured in 2001. This Monforts RNC 400 A features a swing over bed of 410 mm and a turning length of 600 mm. It is equipped with a 12-position disc turret and a powerful three-phase induction motor with a speed range of 30-4000 rpm. If you are looking to get high-quality turning capabilities, consider the Monforts RNC 400 A machine we have for sale. Contact us for further details. • Swing over bed: 410 mm • Swing over radial slide: 280 mm • Turning length: 600 mm • Spindle bearing diameter: 130 mm • Spindle nose: DIN 55026 A6 • Bar capacity/material clearance: 65 mm • Main drive: Three-phase induction motor (100% ED/40% ED), 20.5/30 kW • Max. torque: 500 Nm • Feed drive: Three-phase servo drives with electronic safety monitoring • Rapid traverse (X/Z): 24/24 m/min • Feed force (X/Z): 7.2/10.7 kN • Tailstock: On separate guideway, manual clamping, 900 mm travel, 90 mm quill stroke, 12,000 N force • Tool turret: 12-position disc turret, DIN 69880 / VDI 3425/2, 40 mm shaft diameter (VDI 40), directional logic and plane gear positioning • Hydraulics: Central pressure oil supply for hydrostatics and clamping; hydraulic hollow clamping device (max 65 mm) • Coolant system: 310 L tank, 3 bar, 40 L/min • Control and features: 256 kB memory (expandable to 1.5 MB), DIN 66025 programming, 2D/3D simulation, RS-232C serial interface, tool compensation (up to 600 tools), constant cutting speed, thread cutting/tapping • Construction: 60° slant bed, steel welded construction on reinforced concrete base with 3-point support; hydrostatic guides (X-axis) • Tool measurement setup • Chip conveyor interface (interface only) • Power supply: 3x400 V (+10%), 50 Hz, total connected load 20.5 kW (41 kVA) • OPTIONAL: mounts, flanges, and reducer tubes • The tailstock can only be positioned manually, whereas the quill stroke is programmable. • The distance between the face of the chuck and the maximum turning length is approx. 610 mm. Hnjdsy If A Hspfx Ab Aon • The distance between the face of the chuck and the extended quill tip is approx. 1000 mm. • The distance between the face of the chuck and the retracted tailstock without the quill tip is approx. 1160 mm. Technical Specification Counter Spindle No Driven Tools No