Used Ricoh Fiery N-50A C7500 for sale (51,935)

Condition: new, Oilgear PVWJ 034 A1UV DFY-P-1NNNN A N hydraulic pump, serial number: 11636335, unused, 100% functional, scope of delivery as shown in the photos. Dcedpfx Adjzirqdohon

Condition: repair required (used), functionality: not functional, Year of construction: 2009, load capacity: 2,500 kg, lifting height: 6,400 mm, mast type: triplex, power: 30 kW (40.79 HP), Equipment: lighting, sideshift, trailer coupling, Diesel forklift MITSUBISHI FD25N Year of manufacture: 2009 Exact operating hours unknown! 2.5 ton lifting capacity 2.85 meter overall height 6.40 meter lifting height 38 kW Mitsubishi engine - Triple-stage free-lift mast - Side shifter Dcedpszi Dqcjfx Adhon - Twin tires - Load guard !! Attention: Special price due to engine knocking !! Starts normally, and brakes and hydraulics are in good working order! New forks! Selling price: €6,600 net Affordable delivery also possible!

Condition: used, Year of construction: 1980, Graule ZS 85 N Cross-cut and mitre circular saw, tiltable ~ Year of manufacture: 1980 400 Volt three-phase, 2 kW Saw blade diameter: 350 mm, bore: 30 mm Cutting height: 85 mm Cutting length: 380 mm at 90° Cutting length: 270 mm at 45° Dcsdpfx Aoyv Aa Sodhjn Extraction port D = 100 mm

Condition: used, mileage: 352,000 km, power: 380 kW (516.66 HP), first registration: 02/2021, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 02/2027, brakes: retarder, color: green, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Special equipment: Axle load – measuring device, front axle load 9.0 t, work lights, work lights on the upper rear wall of the cab, external mirror on the right with maneuvering position, battery 220 Ah, CB radio, air horn, cab: steel-sprung, comfort, suspension: front springs 9.0 t, 4 leaves, speed limiter, transmission 16-speed - type: G 280-16, electric tilting roof, rear axle bevel gear 300, interior filter for construction vehicles, fuel tank: 290 liters, aluminum, left, cooling capacity for hot climates, air compressor 2-cylinder, mounting plate / saddle plate 40 mm for fifth wheel coupling, mounting plate / saddle plate 40 mm for fifth wheel coupling 20 t, reinforced engine brake, reinforced engine mounting, auxiliary drive MB 131-2c, configurable special module, frame lowering without bellows residual pressure control, frame overhang 750 mm, smoker's package, retarder, reversing warning sound (external warning signal), fifth wheel coupling: manually lubricated, disc brakes with partial protection, interface for fleet management system, seat cover / upholstery: co-driver seat velour, seat cover / upholstery: driver seat velour, seats in the cab: driver's seat, comfort suspended seat, sun visor external, sun protection roller side window, driver's door, 12V / 15 A socket in the co-driver's footwell (additional), 24V / 25 A socket in the co-driver's footwell, steep shoulder rims 11.75x22.5 (on front axle, reinforced), door extension for the cab, preparation / switch for lift axle on trailer / semitrailer, additional thermal insulation, auxiliary heater (water), twin-plate clutch Dedpszgt S Rjfx Adhjcn Additional equipment: Emission standard EURO 6, axle configuration: 6x4, heated approach / front mirrors, trailer socket 24V / 15-pin, Arocs 5, step on cab left, cockpit multimedia, compressed air connection in the cab, compressed air tank steel, compressed air unit with condensate monitoring, compressed air unit medium, automatic activation for driving lights (light sensor), cab: hydraulic tilting device, cab: L StreamSpace, 2.30 m, tunnel 170 mm, electric windows, vehicle without rear window, generator 100 A, urea tank (AdBlue): 60 liters, body / superstructure: semi-trailer tractor, comfort locking system, fenders 3-piece, steering assistance pump unregulated, steering wheel with multifunction, steering oil cooler, air intake behind the cab, heated air dryer, engine 15.6 liters - 380 kW R6 diesel (OM 473), engine variant OM 473, type of use: short-distance transport, wheelbase not defined, wheelbase variant 3300 mm, ramp mirrors, waste heat utilization, disc brakes front and rear axle, key with remote control (2), side marker lights LED flashing, seats in the cab: co-driver functional seat, steel rims 9.00x22.5, 12V socket in the co-driver's footwell, bumper corners front in steel design, tachograph / EC control unit, Truck Data Center 7 (fleet management system), turbocompound, preparation for toll collection, preparation Truck Data Center (fleet management system), front axle straight, permissible total weight 26.0 t, oil cooler transmission

Condition: good (used), Year of construction: 1992, machine/vehicle number: 19636, Offer 24103 Technical data: - Working range of the axes - X / Y / Z 450 / 400 / 420 mm - Table size 850 x 250 mm Dodpfx Adstwmclohscn - Max. distance spindle - table 400 mm - Working spindle speeds Horizontal 30 - 1275 rpm - Work spindle speeds Vertical 66 - 2840 rpm - Feed rates X - Y and Z - axis - Rapid traverse - Drive 400 V / 3.2 kW - Space requirement approx. W 1400 x H 1800 x D 1400 mm - Weight approx. 1400 kg

Condition: new, Year of construction: 2024, machine/vehicle number: 2024/121/47, functionality: fully functional, saw blade diameter: 420 mm, GRAULE cross-cut and mitre saw Type ZS 170 N (tiltable) 400 Volt three-phase brake motor 2.2 kW Saw blade diameter 420 mm Saw blade holder 40 mm Cutting height 170 mm, Saw blade tilted to 45°: cutting height 115 mm, cutting length 410 mm incl. the following accessories: 1 pc. Machine can be tilted by hand crank from the rear on both sides from 90° to the left by 45° and to the right by approx. 30° to approx. 60° 1 pc. Carbide circular saw blade 420x3.4/2.4x30 mm 48 WZ neg. for wood 1 pc. Machine stand Dcjdpfx Aotwz Tljdhen

Condition: used, Year of construction: 1986, incl. 2 saw blades d, good conditionmake Grauletype ZS 85 Nyear of manufacture 1986motor 2.2 kWcutting height approx. 85 mmcutting length approx. 380 mmblade diameter approx. 300 mmsaw blade bore approx. 40 mmswivel right up to 45°swivel left up to 45°tiltablemachine basefeed brakematerial system made of aluminum-steelnew price approx. 5.000,00 € with accessoriessuction connection D 80 mmweight approx. 150 kgstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in actual condition as inspected,without guarantee and warranty Dcjdjvwfg Eepfx Adhen

Condition: new, Description:- Crosscut and miter circular saw with a maximum cutting height of 170 mm- Miter-adjustable machines in 2 levels- Stable gray cast iron construction- Precise ball bushing of the tool slide on hardened andground steel shafts- Manual saw feed- Fast miter adjustment up to 25 ° horizontally and up to 45 ° vertically- Readjustable fixed stops at 90 ° and 45 °- Lower saw blade protection can be connected to the suction systemScope of delivery:1 x Graule crosscut and miter circular saw, type ZS 170 Nincluding additional charge for 3 kW 400 volt motor1 x machine stand for type ZS 135 N and ZS 170 NTechnical specifications:- Motor: 400 V / 3.0 kW- Speed: 3500 rpm- Cutting length: 410 mm- Cutting width: 410 mm at 90 ° / 290 mm at 45 °- Cutting height: 170 mm at 90 ° / 115 mm at 45 ° 2- Horizontal miter range: 45 ° -90 ° -25 °- Vertical miter range: 90 ° -45 ° (inclined to the left)- Saw blade Ø: 420 mm- Suction nozzle Ø: 100 mm- Weight: 120 kg Dsdpfx Adjvwf Rdohscn

Condition: ready for operation (used), Siemens 1FU1050-6NC tacho generator 20.0 mVmin, max speed: 3200/min, SN: C-M27421, used, normal signs of use, 100% functional, scope of delivery as per photos. Dcedpfx Asx Dvbpedhjn

Condition: ready for operation (used), Siemens 1PH7184-7NL230AJ0-Z motor SN: N-V21194793010001 with Ziehl-Abegg RF22P-2DK.3F.5R axial fan, used, in good condition, 100% functional, delivery as shown in the photos. ATTENTION: Please enquire separately for packaging and shipping costs! See nameplate for details. Dsdpfx Adsx Dv Dqohscn

Condition: ready for operation (used), Technotion Fp 1600N Type: TL 24 N linear motor SN:0322011, used, normal signs of wear, 100% functional, delivery as shown in the photos. Djdpfsx Dwggjx Adhscn

Condition: ready for operation (used), Indramat MDD093C-N-060-N2L-110PB0 / 248946 servomotor SN: MDD093-12631, used, in good condition, 100% functional, scope of delivery as per photos. Dcjdpoxp T H Hjfx Adhsn

Condition: good (used), Year of construction: 1981, machine/vehicle number: 022-009-36, Offer 24374 Technical Data: - Max. pressing force: 100 t - Max. ram stroke approx.: 500 mm - Stroke speed: 25 mm/sec - Return speed: 125 mm/min - Installation height approx.: 1000 mm - Throat depth (to ram center): 380 mm Dcsdpfx Asxuhzcsdhjn - Ram clamping surface: 530 x 400 mm - Ram clamping pin: 40 mm - Table size: 750 x 560 mm - Table bore / through-hole: 200 mm - Table height above floor: 720 mm - Oil capacity approx.: 200 ltr - Drive: 400 V / 11 kW - Space requirements approx.: W 1150 x H 3250 x D 1850 mm - Weight approx.: 4600 kg

Condition: new, Year of construction: 2026, Miter saw and cut-off saw, type: ZS 200 N - 5 KW motor with machine stand, but without saw blade Machine operated via handwheel and worm gear (rear) Tilting Saw blade diameter: 520 mm, saw blade arbor bore: 50 mm Saw blade speed: 2800 rpm 400 volts / 5 KW (S6/40%) motor with brake and automatic star-delta motor switching Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: when tilted: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees when tilted: 140 mm The saw can be tilted to an acute angle of approximately 25 degrees on one side and tilted flat to the left up to 30 degrees. Machine weight: approx. 250 kg Location: Available from stock in 54634 Bitburg Dsdpfx Aoi Dfidodhjcn - immediately available -

Condition: ready for operation (used), Rexroth MDD071C-N-060-N2S-095GA0 3-phase permanent magnet motor, serial number: MDD071-23219, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Dcsdpfx Aji D Ng Dsdhjn

Condition: good (used), Precision balance, spring balance, tension force gauge -Manufacturer: Pesola, precision spring balance type Macro-Line 80196 Dsdpfer H Nlljx Adhscn -Measuring range: 200 Newton -Division: 2 N -Dimensions: 400/40/H40 mm -Weight: 0.5 kg

Condition: used, Three-phase motor, electric motor Djdpfxocu Erve Adhscn -Power: 40 kW -Speed: 1455 rpm -Shaft: Ø 60 mm -Construction: B3 -Protection class: IP 23 -Dimensions: 860/640/H580 mm -Weight: 390 kg

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. Manual laser cleaner 1000W LCH-1000-N Laser cleaner is an innovative device for efficient and precision cleaning of surfaces. It operates by focusing the laser beam on contaminants, causing them to evaporate or break down. Laser cleaners are used in various industries from automotive to preservation of monuments. It is characterized by high efficiency, minimal waste and reduced penetration of the cleaned surface. Compared to traditional cleaning methods, the laser cleaner can be more precise and cost effective. Dsdpfx Aethithedhocn Included in the price One-day training along with machine installation 1 day up to 8 hours—machine installation and training. Available to choose from MAX Photonics MAX Photonics was established in 2004. It is rooted in manufacturing light and optics sources for research institutes, where the quality and stability of the products are of paramount importance. The company quickly realized that the future of laser technology is firmly tied to fiber optics. Research and development started in 2007 resulted in the release of their first 500 CW source in 2014. Since then, the company has begun to vigorously develop its technologies related to laser cutting, welding, marking and engraving. 40000W laser sources can be currently found in their offer. The company has set a goal to become a pioneer in the manufacture of high-capacity industrial lasers. Raycus Wuhan Raycus Fiber Laser was founded in 2007. The company has opted for independent research and development based on mergers with other companies, and is involved in the manufacture of laser sources for a wide range of applications including cutting, welding, soldering, marking and engraving. The brand’s equipment is used in automotive, aerospace, medical, electrical and advertising industries.

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. Manual laser cleaner 1500W LCH-1500-N Laser cleaner is an innovative device for efficient and precision cleaning of surfaces. It operates by focusing the laser beam on contaminants, causing them to evaporate or break down. Laser cleaners are used in various industries from automotive to preservation of monuments. It is characterized by high efficiency, minimal waste and reduced penetration of the cleaned surface. Compared to traditional cleaning methods, the laser cleaner can be more precise and cost effective. Included in the price One-day training along with machine installation 1 day up to 8 hours—machine installation and training. Available to choose from MAX Photonics Dcsdpfx Adsthitpshsn MAX Photonics was established in 2004. It is rooted in manufacturing light and optics sources for research institutes, where the quality and stability of the products are of paramount importance. The company quickly realized that the future of laser technology is firmly tied to fiber optics. Research and development started in 2007 resulted in the release of their first 500 CW source in 2014. Since then, the company has begun to vigorously develop its technologies related to laser cutting, welding, marking and engraving. 40000W laser sources can be currently found in their offer. The company has set a goal to become a pioneer in the manufacture of high-capacity industrial lasers. Raycus Wuhan Raycus Fiber Laser was founded in 2007. The company has opted for independent research and development based on mergers with other companies, and is involved in the manufacture of laser sources for a wide range of applications including cutting, welding, soldering, marking and engraving. The brand’s equipment is used in automotive, aerospace, medical, electrical and advertising industries.

Condition: used, Description: external data input station for use with Vollmer ND brand saw blade handling systems. Serves for individual input of the various processing steps of a saw blade. The data input station with integrated router takes over the interface between the machines, to the customer's own server or PC Djdpsv Saqzsfx Adhocn

Condition: new, Year of construction: 2026, New Kaeser after-compressor N153-G (10/40) Dcsdpfx Adswl Icdshen with ball valve and pressure switch on the inlet side with ball valve and pressure switch on the outlet side with check valve Time of delivery: 6 Wochen Technical Data:Inlet pressure: 10 bar Outlet pressure: 40 bar Pressure ratio: 3.7 Flow rate: 0.89 m³/min Min. ambient temperature: 2 °C Max. ambient temperature: 40 °C Compressor block speed: 650 rpm Number of cylinders: 2 Rated power of drive motor: 4.0 kW Efficiency class of drive motor: IE3 Protection class of drive motor: IP 55 electrical supply: 400 V / 3 / 50 Hz Sound pressure level: 74 dB (A) Compressed air connection on the inlet side: G 3/4" Compressed air connection on the outlet side: G 1/2" Dimensions W x D x H: 1390 x 720 x 820 mm Weight: 255 kg Visit our store.We always have a large selection of new and used compressors in stock!

Condition: good (used), rotary table, rotary indexing table, dividing head, dividing head -Manufacturer: Walter, dividing head with: three-jaw chuck -Type: UTA 160 N -Three-jaw chuck: Röhm Ø 200 mm -Spindle bore: Ø 38 mm -Dimensions total: 625/580/H285 mm -Weight: 122 kg Dcodpfx Aewwg Rwjdhsn

Year of construction: 2001, condition: good (used), 1 used hardening furnace Manufacturer: Nabertherm, Type N 321 Serial Number: 160897, Year of manufacture: 2001, Max. temperature: 1,200°C, Connected load: 400V, 47 kW Internal dimensions: 750 x 1100 x 400 mm Dcedpfoxpf I Njx Adhen Usable volume: 320 liters Weight: approx. 1.6 t Dimensions: Length approx. 2 m, width approx. 1.5 m, height approx. 2 m,

Condition: good (used), Year of construction: 1996, Baler including conveyor, wire bins Manufacturer: Bollegraaf Typ: HBC 50A Build in: 1996 Baler weight: 19000 kg Weight conveyor: 6000 kg Engine: 30 kW Vertical binding Number of wires: 5 Dcedpextmyzjfx Adhen

Condition: ready for operation (used), Indramat MDD090C-N-030-N2L-110GA0 / 245764 servomotor SN: MDD090-06896, used, in good condition, 100% fully functional, scope of delivery as shown in photos. Dsdpfx Ajxtwafodhjcn