Used Reishauer Gearwheel Grinding Machine for sale (64,842)

Condition: ready for operation (used), tool grinding machine working perfectly Godpfx Aisyw N D Ts Nouc

Condition: used, Year of construction: 1980, weight of the machine ca. 6 t Gjdsxzu Ayspfx Ai Neuc

Condition: used, Year of construction: 1991, width of the strips 150 mm band length 2.000 mm motor 400 V loading area 450 x 160 mm Gusdpey Ty A Eofx Ai Nsc total power requirement 4,0 kW dimensions of the machine ca. 1,10 x 0,70 x 1,15 m - Serial-No.: 200.184

Condition: used, Model: CW Serial No: 26520 Capacities: Maximum Swing Over Bed: 430mm Maximum Distance Between Centres: 2500mm Wheel Dimensions: 660x 75mm Work Head Speeds: (3) 20 – 160rpmrpm Wheel Head Speeds: 735rpm Table Swivels: Electrics: 415v, 3ph, 50 Cycles Motors Wheel Head: 20 HP 975rpm Work Head: 3HP 1120rpm Complete With: 2 No 2 Point Open Steadies Complete Tailstock Mounted Wheel Dressing Attachment Coolant Gujdpfx Aisyx Hx De Njc Approximate Dimensions: 6,750 x 2000 x 1800mm Approximate Weight: 9,000kg

Condition: used, Year of construction: 1992, Internal item no.: 25086 Surface Grinding Machine Zirsch & Baltrusch Formmaster 6/30 + Magnetic clamping plate 600x300 mm Attention! The grinding spindle is noticeably louder and should probably be replaced in the near future. See video! Technical Data: Maximum grinding area: 650 x 300 mm Electromechanical cross feed: 300 mm Maximum table load: 300 kg Table clamping surface: 650 x 250 mm Gujdpfoxtn R Iex Ai Nec Maximum distance from table surface to spindle center: 600 mm Grinding wheel dimensions: 400 x 40 mm Travel X: 840 mm / Y: 310 mm Automatic infeed in Z Connected load: 8 kW Installation dimensions (LxWxH): 3500 x 2000 x 2500 mm Weight: approx. 3000 kg

Condition: used, Rotary vibratory finishing machine WALTHER TROWAL type CLS-980 SA Com. No. 15.207 Year of construction 1972 Trough diameter 1850 mm Total outer height of trough approx. 1150 mm Working hopper / gross volume max. 980 liters Useful volume approx. 490 liters Largest possible workpiece diameter approx. 300 mm (measured diagonally) Screen area 3400 cm2 Infinitely variable speed 1000 to 1700 rpm Motor power 22 kW Mains connection 400 Volt, 50 Hz - Switch-on time manually and via timer - Infinitely variable motor speed via DANFOSS drive controller type VLT 3032 (frequency converter) - Manually adjustable eccentric unbalance weights - Container with rubber lining - sound-insulated lid with pneumatic lid opening - Manual separating flap - built-in sieve separator after the separating flap - liquid inlet - Material outlet opening 470 x 300 mm - Control cabinet and drive controller for wall mounting - Bulkhead cover with perforated sieve Gedpodzqn Dsfx Ai Njuc - 1 box of pyramid grinding media Space requirement L x W x H 3000 x 3000 x 2550 mm Transport dimensions L x W x H 2300 x 3000 x 2550 mm dead weight 2500 kg good condition Functional description: Workpieces and grinding wheels are set in motion by the vibrations generated and circulated extremely gently. The constant relative movement between the workpieces and the grinding wheel causes deburring and surface finishing of the workpieces.

Condition: good (used), Year of construction: 1988, Lid SOE graver-grinding machine year 1988 . Accessories : Collets , Good working condition. Gedeuqv Naopfx Ai Nouc

Condition: good (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 31.211.014, center height: 225 mm, grinding length: 1,000 mm, grinding wheel diameter: 400 mm, grinding diameter: 500 mm, workpiece diameter between centers: 500 mm, Kellenberger UR 175x1000 CNC Kelco 70, fully functional Increased from 175 to 225 Guedeyyur Ispfx Ai Njc Machine no. 31.211.014, year of manufacture: 1987 Prepared for internal grinding attachment Accessories: 1x grinding wheel flange, left 1x grinding wheel flange, right 1x steady rest 1x workpiece magnet 1x paper band filter No warranty, guarantee, or return Available immediately, ex works If required, transport can be arranged.

Condition: used, Year of construction: 1991, grinding length: 500 mm, grinding width: 200 mm, Jung JA500-E 1991 Godpjy Iy Ukefx Ai Neuc

Condition: new, Year of construction: 2026, Max Ø 114mm; Straight and bent round tubes; One grinding station; Gsdpst Eaw Dofx Ai Nouc Grinding of straight and bent round tubes up to Ø114mm with maximum flexibility. The ML100 tube grinding machine is the perfect choice for surface grinding and polishing of round, oval and elliptical tubes. The ML planetary belt system allows belt grinding without rotating the tube to deliver the best results. The feed system safely feeds the straight tubes into the grinding station for a consistent and productive surface finish. ML100 Working capacity (Ø mm) 3 - 114 No. of stations 1 Sanding belt, dimensions (mm) (2x) 50x940 Sanding belt speed (m/s) 3-22 Sanding belts Motor (kW) 3 Wheel, motor (kW) 1.5 Total power (kW) 4.5 Power consumption (A) 11 Dust extraction connection (Ø mm) 80 Dimensions (mm) 750x1000x1300 Weight (kg) 250

Condition: used, Year of construction: 2018, controller manufacturer: Mitsubishi, controller model: GOT 2000, _____ Description: Year of manuf. : 2018 Control : Mitsubishi GOT 2000 Grinding length : 1200 mm Grinding width : 600 mm Equipment: Year of manufacture:2018 Control system:Mitsubishi GOT 2000 X-axis:1,600 mm Z-axis:650 mm Grinding wheel dimensions:400 x 50 x 127 mm Speed range:1,000–2,500 rpm Power:11 kW Magnetic worktable:1.200 x 600 mm Coolant supply:Coolant system with filter Emulsion mist separator:Reven Setup mode:Electronic handwheel Godpfxszaynte Ai Neuc

Condition: excellent (used), Year of construction: 1998, Erwin Junker BUAJ BN29C CNC Universal Cylindrical Grinder Excellent condition Can be viewed underpower and demonstrating if you wish to visit. Year 1998 Godpsyvupxsfx Ai Nouc Fanuc series 35i CNC Control Weight 2800kgs Dimensions approx 3000mm x 1850mm x 1800mm Specification - Distance between centres - 800mm Centre table clearance 150mm Work piece weight between centres, max 120kg Machine working capacity IT4 ISO Wheelhead Grinding wheel, max diameter - 400mm Grinding wheel, max, width - 63mm Grinding wheel, clamping diameter - 127mm Motor power - 5.5kW Grinding wheel, max. peripheral speed - 45m/s Wheel head, path of adjustment - 300mm Wheel head, adjustment angle - +45°/-15° Workhead Spindle taper - MK5 Spindle, stepless speed control - 23-291 or 56- 700rpm Work head, adjustment angle - 90° Tailstock Taper - MK4 Tailstock barrel, stroke 30mm Taper ratio, fine adjustment +/-0.15mm Longitudinal feed Table travel 756mm Table, working travel speed 0÷7.5m/min Top table, swiveling +/8°30

Condition: good (used), Year of construction: 1989, functionality: fully functional, center height: 180 mm, grinding length: 1,000 mm, grinding wheel diameter: 400 mm, Round grinding machine KARSTENS K11 Gujdpfxjzbhkxj Ai Njc Control: hydraulic, manual Grinding length: 1000 mm Grinding diameter: 360 mm Grinding wheel diameter: 400 mm Peripheral speed: 35 m/s Drive power: 5.5 kW Spindle diameter: 60 mm Tailstock arbor: MK 4 Swiveling stroke: Y-axis: Belt filter system Digital display

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: M60I/9035, Offer Number: M60I/9035 Machinetype: surface grinding machine Gujdpfx Aiew N Dmxj Njc Make: STÖCKEL Type: FX60/30 SPS Constr. year: 2010 table size: 600x250 mm Location: Germany

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Guedpfjvvkipsx Ai Njc

Condition: used, Year of construction: 2022, Oscillating cylinder grinding machine – technical specifications: A possible screwed version for spindle sleeve clamping. Something similar to the ProLoc device is used. Storage location: Nattheim. Gusdpfjwhqprjx Ai Nsc

Condition: used, Year of construction: 2022, Oscillating cylinder sanding machine, technical specifications: A possible screw variant for spindle sleeve clamping. Something similar to a ProLoc device is used. Storage location: Nattheim Guodewhqplspfx Ai Njc

Condition: excellent (used), functionality: fully functional, KELLENBERGER PRECISION UNIVERSAL CYLINDRICAL GRINDING MACHINE MODEL: 1000 U YEAR OF MANUFACTURE: 2000 PARTIAL OVERHAUL: 2026 Centre height: 175 mm Grinding length: 1000 mm Equipment: - Standard accessories - Standard workpiece headstock MK5 with adapter flange DIN 55027, size 5 - Splash guard hood for the above - Tailstock with fine adjustment, MK4 - Internal grinding attachment with protective cover for grinding spindle D:80 mm for belt-driven spindles - FISCHER internal grinding spindle type HJN 842, incl. grinding mandrels (4 pieces, choice) - HJNZ 42 collet chuck - Oil mist lubricator for HJN spindles - STREULI magnetic paper band filter system, type: SPB 2 - Coolant supply through the workpiece spindle - HEIDENHAIN digital length measuring system on X and Z axes Gjdpfsyf E Suox Ai Nsuc - Sine bar on the workpiece headstock incl. alignment arbor MK5 - Permanent magnetic chuck, D:200 mm - Three-jaw chuck, D:160 mm - Four-jaw chuck, D:160 mm - Collet attachment for Schaublin collets B32 - Set of B32 collets, D: 1.0–30.0 mm, increment 0.5 mm (59 pieces) - Dial indicator stop for table swivel with indicator 0.01 mm - Table fixed stop - Dressing stop for internal grinding - LED machine lamp - Various grinding wheel flanges, left (2 pieces) - Pneumatic table load relief - Swiveling dressing device for external, face, or internal grinding operations - Set of vibration damping pads - New three-color paint finish (light grey RAL 7035 / blue RAL 5012 / dark grey RAL 7016) - New acceptance protocol according to KELLENBERGER standard - Documentation - CE conformity The machine is currently being overhauled, sample photos shown!

Condition: used, Brush deburring machine, tube deburring machine BAUER type BE 1 Machine. No. Year of construction 2005 Brush diameter 250 mm Brush width 25 - 60 mm Speed 1500 / 3000 rpm Power 2.2 / 3 kW Mains connection 380 Volt, 50 Hz - Material support - new deburring brush Space requirement L x W x H 550 x 450 x 440 mm Weight 65 kg good condition Gujdehrkrwjpfx Ai Njc

Condition: used, Brush deburring machine, tube deburring machine BAUER type BE 1 Machine No. 29 Year of manufacture 1992 Brush diameter 250 mm Brush width 25 - 55 mm Speed 1500 / 3000 rpm Power 2.2 / 3 kW Mains connection 380 Volt, 50 Hz Godpfxjhrkrps Ai Njuc - Material support table Required space (L x W x H) 500 x 450 x 440 mm Weight 45 kg good condition

Condition: used, centre height 100 mm centre distance 500 mm grinding wheel diam. min/max. 200 - 300 grinding wheel speeds 2.250/2.420/2.680 U/min workpiece turning speeds 30 - 750 U/min Workpiece spindle: MK 4 Grinding power 3 kW Headstock Power 0,45 kW In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Guodey Tbtrepfx Ai Nec Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, Year of construction: 2011, Maximum grinding length: 1200 mm Maximum grinding length with table dresser: 1000 mm Maximum grinding width: 600 mm Grinding height (table to underside of grinding wheel): 550 mm Table load with magnetic chuck: 975 kg Table load without magnetic chuck: 1200 kg Table speed: 1 - 40 m/min Grinding spindle Motor spindle: 11 kW Grinding wheel: 406 x 152.4 x 100 mm Speed: 1400 rpm Longitudinal axis (Z-axis) Rapid traverse: 5 m/min Adjustable feed: 1 - 50 mm Continuously variable feed: 0 - 2000 mm/min Smallest infeed: 0.001 mm Vertical axis (Y-axis) Rapid traverse: 1.5 m/min Smallest infeed: 0.001 mm Space requirements approx.: 4450 x 2935 x 2540 mm Total weight approx.: 6700 kg Equipment: - Electro-permanent magnetic chuck 1000 x 500 mm incl. electronic control module and potentiometer - Coolant cleaning system with paper filter and magnetic separator 350 l – delivery rate 100 l/min - Static frequency converter incl. automatic dressing compensation - Complete extraction system Gsdpfjxhdz Eox Ai Njuc - Siemens control with electronic handwheel - Various accessories, 2 flanges and 5 grinding wheels

Condition: excellent (used), Cup grinding machine Swivel arm grinding machine Make Lomefa Gujdpfxoui S R Ds Ai Nsc Type Unicum 8" YEAR OF MANUFACTURE 1980 grinding wheel diameter 200 mm Motor 380 Volt 1,84 kw Separate coolant tank in the machine base Transport dimension: L.850 mm W.800 mm H.1650 mm Weight 350 kg

Condition: good (used), Grinding diameter 3-40mm Gjdpfx Aegy Ti Doi Nsuc Length of drill unlimited Point angle 40-180mm Point thinning device Dressing attachment MARCELS MASCHINEN CH

Year of construction: 2002, condition: refurbished (used), I offer on behalf of a customer and on his account a VOUMARD 150 CNC L 1300 for sale. The machine is equipped with: 4-fold turret 3 x inside, 1x empty space for outside pneumatic swivelling dresser diameter max 350 mm Gusdpfx Asgigv Doi Nec length max 1.300 mm CNC Fanuc 32 i very extensive accessories among others several hydr. steady rests, power chucks etc. View under "Documents Machine can be inspected under power at the owner's premises. The machine was overhauled in 2016 In addition, I offer 2 pieces of grinding spindles Voumard VMX 90 A, once new, once reconditioned. The can also be purchased seoerat