Used Röders Tec Rxp400Ds/Rxd5 for sale (5,692)

Year of construction: 2013, condition: used, We offer you a used PET bottle crusher of the manufacturer BOREMA, type R-1200 F, year of construction 2013, for residual emptying, deaeration and pre-compaction of the fed PET bottles, from 0.3 up to 2.5 l content. The machine has a chassis and can be moved into and out of the feed chute of your baler. The machine has a throughput capacity of approx. 85,000 bottles/h, corresponding to approx. 3t/h. We have the following technical information: Manufacturer: BOREMA Umwelttecjhnik AG Type: R-1200 F (with trolley for retracting and extending) Year of manufacture: 2013 Drive power: 11 kW Connected load: 15 kW Rated current: 32 A Bodpju Thpnofx Akaslg Back-up fuse: 40 A Type of construction: Continuous system Function: Double rotor press system Rotor pretension pneumatic: approx. 16t Overload protection: by anti-blocking system Input material: PET disposable and returnable empty bottles 0.3 to 2.5 L capacity Input material: HDPE bottles and canisters up to 3 l capacity Throughput capacity: approx. 3 t/hour, corresponding to approx. 85,000 bottles/hour, depending on size Required compressed air output: G1/2", 8 bar, 40 l/min. Compression ratio: 1:3 Flange dimensions inside: 972 x 1220 mm Feed opening: 565 x 1280mm Weight: approx. 2500kg Possible applications: Due to the chassis, the PET flattener can be moved into the feed chute of your baler as required, thus ensuring residual emptying, venting and pre-compaction of the fed bottles and canisters. When the material is changed, the PET flattener is simply moved out of the feed chute again and paper, cardboard, film, etc. can now be pressed further without using the flattener. Process of the BOREMA PET crusher: The plastic packages are drawn in by two rotating shafts. One of the rotating shafts is pneumatically pretensioned by two air bellows and presses the PET bottles with 16 t of pressure against the second rotating shaft. In the process, the closed plastic bottle is squeezed together, caused to burst and vented. Residual liquids run out and the material falls into the baler in a precompressed state. When impurities are introduced, the pneumatically pre-tensioned shaft deflects to the side and the impurities are channeled through. Significant advantages compared to conventional PET perforators with punching mandrels or knives: The BOREMA process is much more efficient and less subject to wear than conventional PET perforators with punching mandrels or knives. The biggest advantage is that any foreign matter such as metal parts, stones, bottles with frozen contents and pieces of wood are passed through the pneumatically deflecting rotor shaft without stopping the operation of the system or causing any major damage. With conventional perforators, mandrels or blades sometimes break off or become so jammed with the interfering material that the plant has to be shut down and repaired at great expense. Comments: The crusher is in good condition, was dismantled from the running operation, stored, is available at short notice and after assembly immediately ready for use. The documentation (manual, CE, electrical/hydraulic circuit diagram) is complete. An inspection is possible by arrangement. The technical information is taken from sales brochures, the operating instructions or other information provided by the manufacturer. We accept no liability for incomplete or incorrect data and informations.

Condition: refurbished (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, pressing force: 70 t, overall weight: 9,500 kg, filling opening width: 420 mm, filling opening length: 1,250 mm, Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Bsdpeu Th S Sjfx Akajlg Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet offcuts, sheet steel as well as aliminium, brass and copper waste. Condition of the baler: The can press was completely overhauled in our workshop. The press is in a very good condition, see the functional video after the overhaul and is sold with the 12 months OBM parts warranty. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Weiss Technik SaltEvent Type: SaltEvent SC/UKWT 1500 Operating hours: approx. 11,889 h Year of manufacture: 2022 Recirculating Air Corrosion Change Test Chamber / Salt Spray Test Chamber For sale is a high-quality Weiss Technik SaltEvent SC/UKWT 1500 suitable for corrosion, salt spray, condensation water, and climate change testing applications. The unit is ideal for use in industry, research, development, and quality assurance. Technical Data: Manufacturer: Weiss Technik GmbH Type: SaltEvent SC/UKWT 1500, with ring flushing line Year of manufacture: 2022 Test chamber volume: approx. 1,450 liters Temperature / Climate Data: Temperature range (climatic test): +23°C to +70°C Humidity range: 20% to 98% r.h. Dew point range: +12°C to +69°C Salt spray test: ambient temperature +5 K to +50°C Condensation water test: ambient temperature +5 K to +42°C Electrical Data: Rated voltage: 3/N/PE AC 400 V ±10% / 50 Hz Rated power: 9.8 kW Rated current: 18 A Refrigerant as per nameplate: R134a – 1.30 kg – GWP 1430 CO2 equivalent: 1.86 t LP max.: 17 bar g HP max.: 25 bar g Media Connections: Compressed air / GN2: max. 12 bar Deionized water: min. 3 bar / max. 5 bar Water connection for ring flushing line: max. 6 bar Condensate drain available Exhaust air connection available Power supply: 3/N/PE 400 V / 50 Hz Dimensions (according to drawing): External dimensions: approx. 3710 x 1537 x 1769 mm Test chamber length: approx. 2365 mm Loading height: approx. 850 mm Weight (according to nameplate): approx. 710 kg Operating hours (as indicated): approx. 11,889 h Equipment / Features: S!MPAC / WebSeason touch control panel Ethernet / Network connection USB interface Salt spray Condensation water test Dry climate Climate / humidity operation Ring flushing line Storage tank Rod inserts Control cabinet integrated Exhaust air connection Compressed air connection Connection for deionized water Water connection for ring flushing line Condition: used Unit is fully visible as per the images provided. Current status: external operating mode. Display notice: hood not closed. Scope of delivery: Bljdpfx Aksy Hkg Ieaeg Weiss Technik SaltEvent SC/UKWT 1500 Scope of delivery as shown in the images Inspection by appointment is possible. Loading can be organised. (Technical data subject to change and errors excepted!) Further questions can be answered by phone.

Condition: used, Condition: NEW with pneumatic clamping device. The universal assembly station for the production of wall, ceiling and roof elements in timber frame construction,ceiling and roof elements in timber frame construction. - Heavy-duty, basic structure of the machine frame for a flat work surface - Clamping of the elements via 9 system clamping beams with pneumatic pressure cylinders. The system clamping beams are extendable for element heights from 100 to 3,800 mm. The cylinder stroke is 320 mm, the clamping force per cylinder is approx. 420 kg/4,200 N. at 10 bar operating pressure It can be clamped in two groups of 5 pieces and 4 pieces, two elements can be clamped/worked on at the same time. - Planking of the work surface as far as technically possible with wooden panels. (A perforated metal panel is available as an option, as shown in the photo)) Bodpewv Tqbofx Akaolg - Stop system at the bottom with 9 pins and at the side with 7 pins for dimensionally accurate elements. - Swivelling device of the assembly station via 3 hydraulic cylinders for panel weights up to panel weights of up to 4,000 kg to 85° (95°). The hydraulic system is compactly integrated in the frame area of the assembly station. - The electrical control cabinet is also installed underneath the assembly station for protection. - The functions are operated via a control bottle. - A compressed air connection and socket are installed on both ends of the station. and on the long side of the station there are 2 sockets and 2 compressed air connections compressed air connections for connecting hand-held devices. - The stations are modular in design, so that they can be expanded immediately or later with a to form a complete turning station. You can see a turning station in picture 3. - Further options: Assembly table without set-up function Perforated metal panels Other working dimensions on request Working area: - Maximum element size (W x H): 12,000 x 3,800 mm - Minimum element size (W x H): 1,000 x 100 mm - Cylinder stroke of the clamping cylinders: 320 mm - Stop/ socket pin height: 120 mm - Working height: approx. 700 mm - Colour RÁL 7035 light grey

Year of construction: 2003, condition: used, contact roller 70 x 50 abrasive belt size 2000 x 12/50 power capacity 2,2 kW Overall size ca. 400 x 1100 x 1250 mm deburring machine / free belt frinding machine abrasive belt with widt from 12-50 mm with vertical working position head inclination up to 45° both ways easy bending of the belt allows to follow the shape cutting speed 24m / sec big tabel surface with ball rolling with self filtering dust extractor system, filtering bag in retardant polyester material for retaining finest dust. Impeller with open blades to prevent clogging. air consumption 700 m³/h Bsdpfxjy Ihabj Akajlg comes with a huge bunch of belts!

Condition: used, all stainless steel twin shaft paddle mixer Bedpsy Dc Uxjfx Akaolg intermeshing mixer useful content : 2.000 L dimensions (l x w x h) : ± 4.100 x 1.500 x 2.700 mm 1 front discharge guard 18 kW

Condition: used, 2 x "Inotec" Twin shaft paddle mixer 2.600L Type IPM 2000 all stainless steel twin shaft paddle mixer intermeshing mixer useful content : 2.000 L dimensions (l x w x h) : ± 4.100 x 1.500 x 2.700 mm 1 front discharge guard with weighing cells 18 kW in very good condition in good working order + 2 x Outfeed conveyor belt” Type IFB 1300/800 all stainless steel comes under the discharge guards of the mixer plastic belt 0,7 kW outfeed height ± 1.200 mm in a eurobin / Dolav in very good condition in good working order + 2 x Loader for eurobins Type IHV 2000-300 all stainless steel for 200L or 300 L eurobins dimensions: (L x W x H): ± 900 x 1.300 x 4.020 mm 1,6 kW in good condition in good working order + Elevating spiral screw with infeed belt Elevating spiral screw Type IFS 5600/400 all stainless steel mobile 5,3 kW screw diameter 400 mm Loading height 800 mm Unloading height 3.200 mm dimensions: (L x W x H): ± 5.200 x 2.500 x 4.450mm in very good condition in working order + Infeed belt all stainless steel white pvc belt belt width 700 mm belt length 2.500 mm Unloading height 2.800 mm in good condition in good working order + control box Type IPL 05-02-N Total 58 kW 3x 400V -50Hz 98A Year of construction 2003 dimensions: (lxwxh) : ± 1,800 x 550 x 1,800 mm PLC control system Siemens S7-300 + Simatic panel OP270 Bodpfx Akey A Hvksaolg + inspection platform The machines will be fully inspected and tested both mechanically and electrically. Parts showing visible wear will be preventively replaced in our workshop.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, first registration: 06/2018, loading space length: 7,000 mm, loading space width: 2,550 mm, total length: 11,000 mm, total width: 2,550 mm, suspension: air, tire size: 265/70/19.5, color: blue, Year of construction: 2018, Equipment: ABS, = Additional Options and Accessories = - Lift axle - Air suspension = Further Information = Bljdpfjwifrdjx Akajg Axle configuration Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tyre size: 265/70/19.5; twin tyres; lift axle; max. axle load: 10,000 kg; steered Rear axle 2: Tyre size: 265/70/19.5; twin tyres; max. axle load: 10,000 kg; steered Rear axle 3: Tyre size: 165/70/19.5; twin tyres; max. axle load: 10,000 kg; steered Weights Unladen weight: 12,000 kg Payload: 36,000 kg Gross vehicle weight: 48,000 kg Functional Loading platform height: 95 cm Condition Technical condition: very good Visual condition: very good EMTECH 3-AXLE LOWBED TRAILER SAF AXLES TRIDEC STEERING SYSTEM AIR-SUSPENDED, STEERED 1 AXLE IS LIFT AXLE 10,000 KG PER AXLE TECHNICALLY PERMISSIBLE GROSS WEIGHT 48,000 KG TYRE SIZE 265/70 R19.5 LOADING PLATFORM LENGTH 700 CM EXTENDABLE 515 CM LOADING PLATFORM WIDTH 255 CM LOADING PLATFORM HEIGHT +/- 95 CM LASHING EYES AND STAKE POCKETS

Condition: ready for operation (used), Year of construction: 2013, overall weight: 2,492 kg, Circular Metal Saw manufactured in 2013. This Elumatec DG 244 features a cutting length of 6,000 mm and a saw blade diameter of 550 mm. It includes a motorized tilting range from 22.5° to 140° and comes with a mobile roller conveyor for efficient extraction. If you are looking to get high-quality cutting capabilities, consider the Elumatec DG 244 machine we have for sale. Contact us for further details. • Cutting Length (X-Axis Travel): 6,000 mm (6.0 m) • Saw Blade Diameter: 550 mm • Controller: E 355 (2-Axis Control) • Tilting Range: 22.5° to 140° (Motorized E-Axis) • Software: Module for chop cuts and overlengths (E355/E555) • Software Interface: Connection for window construction programs Additional equipment • Short length stop: Included for stationary unit Bledoyv H Tiopfx Akaeg • Profile lifting rail set: Included for stationary and mobile units • Roller conveyor: 1.5 m, mobile, 400 mm width for extraction • Workpiece support: Mobile type • Extraction Unit: Complete for DG 244, 230/400V, 50Hz, 2x 2.2kW

Condition: new, functionality: fully functional, Year of construction: 2025, control type: PLC-controlled, degree of automation: semi-automatic, actuation type: mechanical, working width: 3,050 mm, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 4 mm, table height: 800 mm, back gauge adjustment: motor-driven, back gauge: 750 mm, power: 7.5 kW (10.20 HP), type of input current: three-phase, overall weight: 3,850 kg, total length: 3,720 mm, total width: 1,630 mm, total height: 1,230 mm, number of support arms: 3, warranty duration: 12 months, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, New guillotine shear 3100 x 4mm IMMEDIATELY AVAILABLE FROM STOCK Mechanical guillotine shear, 3100mm working length, for cutting sheet metals up to 4mm thick. SARETECH in Bréal Sous Montfort. Ideal machine for boilermaking, metalworking, and demanding industrial workshops. Brand new machine – immediately available in our showroom in Bréal-sous-Montfort. Main features: - Cutting length: 3050mm - Cutting thickness: 4mm - Backgauge positioner for precise adjustment (motorized) - Easy blade gap and angle adjustment - Upper blade with 2 cutting edges - Lower blade with 4 cutting edges - Upper blade guided by low-friction slides, ensuring consistent and precise cutting - Reliable, easy-to-maintain clutch system for long-term use - Mechanical hold-downs for perfect sheet clamping, preventing slippage during cutting - 1000mm front tables with T-slots for positioning and accessory mounting - Motorized backgauge with 750mm travel - Ball table for excellent stability and easy sheet handling - Full safety standard compliance (CE) - Front support arms with scale/rule - Cutting line illumination - Rear safety guard Advantages of the SARETECH Comfort range: - Excellent repeatability - Precise cutting quality across the full working length Bledpfx Aksyr Navjaeg - Fast and consistent cutting, ideal for repeat production runs - Perfect for intensive use - High productivity thanks to fast mechanical cycle and automatic backgauge positioning - Low maintenance costs compared to hydraulic systems - Controlled energy consumption, with the motor running only during cutting - Simple and intuitive operation, suitable for sheet metal and fabrication workshops - Excellent price-performance ratio, ideal for workshops seeking performance and reliability without unnecessary complexity The machine can be viewed by appointment and tested in the SARETECH showroom in Bréal Sous Montfort. Transport and handling options available. Installation, commissioning, and training included. Technical support and after-sales service provided. Key machine highlights: - Faster cutting speed than hydraulic models - Low maintenance and operating costs - Maximum efficiency - Quiet operation - CE certified - Attractive pricing Machine has been tested and approved. We can provide our quality test reports upon request. Site visits or demonstrations (in-person or via video conference) can be arranged. The machine is sold with commissioning and training included (excluding transport and handling). Price shown is excluding VAT. 1-year warranty, extendable upon request. After-sales service provided by SARETECH. Manufactured in Turkey.

Year of construction: 2018, condition: used, Hitec Z-eleveting belt. Bjdpeu N Nnnofx Akajlg

Condition: new, functionality: fully functional, Year of construction: 2022, overall weight: 150 kg, total height: 2,300 mm, total length: 1,200 mm, total width: 600 mm, controller model: SPS-Steuerung, working width: 300 mm, input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 6 bar, load capacity per stand: 50 kg, number of drawers: 1, positioning accuracy: 1 mm, working height: 30 mm, working length: 400 mm, working range: 400 mm, Equipment: CE marking, safety light barrier, Feeding and storage system for light articles in trays. Feeding of trays for magazine storage in automated production. Especially for surface or contour sensitive parts. Made in Germany Bedsyx Hgbepfx Akaolg • Designed for tray sizes up to 400 x 300 x max. 30mm. • Fast tray change time (4-8 seconds) • Tray weight incl. workpieces max. 5kg • Tray stacker weight max. 50kg • Positioning accuracy ± 1mm • PLC control with operating and monitoring display • ESD equipment • Safety package light curtain - Leuze for tray stacker • Preparation communication AGV - Siemens IWLAN client • RFID read-write head • Autonomy time increase 1 stack • Machine safety: active door interlock • Low space requirement, due to compact design • Flexible adaptation to different machines, due to different interfaces • Low investment costs • Complete equipment • Stable design • (solid steel construction, powder coated) • No machine adapters necessary • Supply voltage 400V / 50Hz / 3ph • Compressed air connection min. 6bar • Dimension: 1200 x 600 x 2300mm (LWH)

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, total length: 900 mm, total width: 1,500 mm, total height: 2,050 mm, input voltage: 230 V, laser power: 30 W, laser wavelength: 1,064 nm, repeat accuracy: 0.01 mm, laser type: fiber laser, Equipment: USB port, lighting, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Bedeyxccrepfx Akaolg The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: new, Year of construction: 2026, functionality: fully functional, position of the milling head: mittig, spindle speed (max.): 60,000 rpm, total height: 1,550 mm, total length: 1,870 mm, total width: 1,040 mm, rotational speed (max.): 60,000 rpm, type of input current: three-phase, overall weight: 560 kg, working range: 420 mm, warranty duration: 12 months, drive type: Linearmotor, Equipment: rotational speed infinitely variable, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 RD is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality requirements and guarantee the depaneling machine a long service life and high reliability. Semiautomatic depaneling - solutions on demand The LOW 4322 RD depanelling machine enables fast product changeover while maintaining short depanelling and handling times. The blank printed circuit board is inserted with a parallel shuttle, picked up and fixed with pin clamping technology and, if necessary, in combination with vacuum suction cups. Made in Germany The machine is equipped with: - a shank and slice tool separation module on Z-axis (automatically rotatable 0-90) - X-Y cross table module in linear motor technology with high-resolution measuring system - 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors - profil frame with two maintenance doors - left and right. ESD - standard vision system base module for teach-in programming - Working area is 420 x 330mm Bsdpoxt Dk Rjfx Akajlg - Automatic cutter length processing - Remote maintenance/support via remote connection - Touch IPC with Windows 10 Pro operating system - Laser axis measurement incl. protocol - Air ionization - Cutter breakage control for end mills only - Preparation for vacuum clamping technology - disc and sliding doors ESD conform Optionally a vacuum cleaner unit can be offered later.

Condition: new, Year of construction: 2022, functionality: fully functional, total width: 600 mm, total length: 1,200 mm, total height: 2,300 mm, overall weight: 150 kg, type of input current: three-phase, input voltage: 400 V, working range: 400 mm, product height (max.): 30 mm, controller model: SPS-Steuerung Siemens Simatic HMI, input frequency: 50 Hz, compressed air connection: 6 bar, load capacity per stand: 50 kg, positioning accuracy: 1 mm, Equipment: CE marking, documentation/manual, lighting, safety light barrier, Feeding and storage system for light articles in trays. Feeding of trays for magazine storage in automated production. Especially for surface or contour sensitive parts. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm. • Fast tray change time (4-8 seconds) • Tray weight incl. workpieces max. 5kg • Tray stacker weight max. 50kg • Positioning accuracy ± 1mm • PLC control with operating and monitoring display • ESD equipment • Safety package light curtain - Leuze for tray stacker • Preparation communication AGV - Siemens IWLAN client • RFID read-write head • Autonomy time increase 1 stack Blodpjyx Hrkjfx Akaog • Machine safety: active door interlock • Low space requirement, due to compact design • Flexible adaptation to different machines, due to different interfaces • Low investment costs • Complete equipment • Stable design • (solid steel construction, powder coated) • No machine adapters necessary • Supply voltage 400V / 50Hz / 3ph • Compressed air connection min. 6bar • Dimension: 1200 x 600 x 2300mm (LWH)

Condition: ready for operation (used), Year of construction: 2005, Circular Metal Saw manufactured in 2005. This Elumatec AKS 134 features a saw blade diameter of 550 mm vertically and 500 mm horizontally, with a maximum profile height of 250 mm and a maximum feed of 830 mm. If you are looking to get high-quality cutting capabilities, consider the Elumatec AKS 134 machine we have for sale. Contact us for further details. • Saw blade diameter (vertical): 550 mm • Saw blade diameter (horizontal): 500 mm • Maximum profile height: 250 mm Bsdpfx Aey H Ecdjkaslg • Maximum feed: 830 mm

Condition: excellent (used), Power: 35 kVA Maximum welding power: 67 kVA Short-circuit current: 15.5 kA Maximum welding current for steel: 12.4 kA Welding current at 100% duty cycle: 4500 A Secondary open voltage: 5.4 V Supply voltage 50Hz*: 400 V Power cable diameter at L=30 m: 16 mm² Fuse (slow-blow): 63 A Bljdpfx Akjy Hr T Noajg Insulation class: F Projection: 400 mm Maximum electrode force at 6 bar: 300 daN Working stroke: 5-80 mm Minimum arm opening: 280 mm Maximum arm opening: 280 mm Arm diameter: 50 mm Electrode holder diameter: 25 mm Standard electrode diameter: 14.8 mm Compressed air connection: 6.5 bar Air consumption per 1000 spot welds: 1.7 Nm³ At 20 mm working stroke at 6 bar: 5.4 Nm³ Max. inner diameter air hose: 8 mm Water cooling consumption: 4 l/min Noise level: < 70 dB(A) Net weight of the machine: 210 kg

Year of construction: 2020, operating hours: 1,288 h, condition: excellent (used), functionality: fully functional, 4-axis CNC profile machining center For economical and efficient machining of aluminum and thin-walled steel profiles Standard version equipped with air-cooled milling spindle (optionally available with water-cooled milling spindle) All machining operations, such as milling, drilling, and thread tapping, are performed on a stationary clamped profile. Stepless machining between -90° and +90° with any available tool Automatic clamp adjustment with absolute measurement system The traveling tool magazine ensures short tool change times for optimal machining cycles. The magazine can hold up to eight tools. For double profile and end machining, a maximum of two swiveling angle milling heads are available, each with two different tools (0°–90°–180°–270°) (optional) Two separate machining zones for pendulum operation (optional). Area safeguarding is provided by a laser scanner on the operator side for maximum safety and easy machine accessibility. 4-axis control 18.5" color monitor, USB ports, and network connection Blsdpfxswxmdte Akajg Windows operating system with eluCam SBZ 140 – 7.6 m Max. machining length with end machining: 7,600 mm Max. machining length without end machining: 7,720 mm

Condition: ready for operation (used), Year of construction: 2014, laser power: 20 W, Laser marking machine manufactured in 2014. This Trotec Speedmarker 300 features a nominal power of 60W and includes a rotary attachment for enhanced versatility. The workstation is designed with an enclosed Class 2 safety housing, ensuring operator safety while providing visibility. If you are looking to get high-quality laser marking capabilities, consider the Trotec Speedmarker 300 machine we have for sale. Contact us for further details. • Input power: 100–250 VAC, 50/60 Hz • Nominal power: 60 W • Standards: EN 60825-1 (2007) • Controls: External rack-mounted control unit with emergency stop, key switch, and status indicators • Workstation: Enclosed Class 2 safety housing with viewing window and manual lift door Additional equipment • Rotary attachment (Model IUX 65/3-M2) Bsdpfxjy Htbuj Akaelg • 3-jaw rotary chuck with additional jaw sets • Rotary max speed: 3000/min (Nmax)

Condition: ready for operation (used), Year of construction: 2010, Laminating press manufactured in 2010. This LIGMATECH MPH 510/25/09 features an integrated assembly line setup with a total length of approximately 26 meters, including an entry section. It includes a cross-transport belt drive, working height adjustment, pre-selection of pressing time, and light curtain safety with 4-way muting. If you are looking to get high-quality laminating capabilities, consider the LIGMATECH MPH 510/25/09 machine we have for sale. Contact us for further details. • carcase press • Working height adjustment • Pre-selection of pressing time • Press area control Bodpfxey Hrv Do Akajlg • System configuration: Integrated assembly line setup (total length approx. 26 m including entry section) Additional equipment • Cross-transport belt drive • Light curtain safety with 4-way muting

Condition: like new (used), Year of construction: 2021, Inotec I175-IT5-110D Emulsfier Inotec emulsifiers used for the production of fine minces in the meat industry and for the production of fine emulsions of meat, vegetables and fruits. Manufacturer: Inotec Model: I175-iT5-110D-FU-SP Bsdjy Hqnljpfx Akajlg Year: 2021 Power: 206A / 128kW Capacity: Up to 7.000 kg/h Hole plate diameter: 175 mm Hopper capacity: 200 liter Machine dimensions LxWxH: 1.920x1.150x1.480 mm Machine weight: 900 kg.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, C-frame press for clinching technology Pressing force: 4.8 t Air pressure: 6 bar Total stroke: 32 mm Bledpfx Aksy Ey Hzeasg Power stroke: 3 mm No tools included

Condition: used, weight of the machine ca. 110 kg dimensions of the machine ca. 950 x 435 x 980 mm ESS's newly developed "mti inverter series" for single-phase welding equipment, , which has already proven itself thousands of times over, is now being expanded to include a three-phase system. The combination of semiconductor technology, resonant inverter circuits and classic transductor technology also offers thepossibility of integrating the respective advantages into future- orientated welding devices in this case. --> Technical data Mains connection: 3/PE AC 400 V --> Maximum primary power: 14 kVA --> Mains fuse: T 16 A --> Setting range: 5 - 300 A Bljdpfxswf Rg So Akajg --> Stick electrodes: Ø 1.5 - 5 mm --> Protection class: IP 23 --> Water cooling unit for the welding torch: built-in

Year of construction: 2004, condition: excellent (used), functionality: fully functional, 2004 Elumatec AKS 134 Notching Saw – High-Precision Notching for Curtain Walls, Skylights & Conservatories Manufacturer: Elumatec Model: AKS 134 Year: 2004 Condition: Very Good Now available: Elumatec AKS 134 Notching Saw, manufactured in 2004 and in very good condition. This robust, German-engineered machine is purpose-built for precise notching in aluminium profiles, specifically designed for fabricators working on curtain walls, conservatories, skylights, and other complex architectural aluminium systems. The AKS 134 features a dual-saw unit design — vertical and horizontal — offering exceptional flexibility, accurate angles, and safe operation. Combined with digital angle displays, hydro-pneumatic feed, and automated cutting cycles, this is a premium choice for serious aluminium fabricators. 🛠️ Key Technical Specifications: 🔻 Lower Vertical Saw Unit: Saw Blade Diameter: 550 mm Tilting Range: +45° forward to -60° rear Max Cutting Height: 210 mm Motor Power: 3 kW (with motor brake) Speed: 2,800 rpm Manual Tilt Adjustment with Digital Display 400V, 3~, 50Hz 🔺 Upper Horizontal Saw Unit: Saw Blade Diameter: 500 mm Bedpfjxyupkjx Akajlg Tilting Range: +55° down to -60° up Max Notching Depth: 190 mm Motor Power: 3 kW (with motor brake) Speed: 2,800 rpm Travel Distance: up to 830 mm Manual Tilt Adjustment with Digital Display 400V, 3~, 50Hz ⚙️ Machine Features: Dual saw blades for versatile and complex notching Workpiece stays fixed – only the saw units move, enhancing precision Simultaneous vertical saw unit height adjustment via handwheel (with analogue readout) Digital angle displays for both saws and pivoting back fence Manually adjustable support table Horizontal and vertical pneumatic clamping Automatic cutting cycle at 90° with two-hand safety control for angled cuts Hydro-pneumatic saw feed for smooth, consistent cutting Compressed Air Supply: 7 Bar (35–45L per cycle) 📏 Machine Dimensions & Weight: Footprint: 3000 × 1420 × 1600 mm Weight: 1,250 kg 🏗️ Ideal For: Aluminium façade and curtain wall manufacturers Skylight and conservatory fabricators Precision aluminium notching applications Workshop environments needing multi-angle notching in high volumes 🧰 Reliable, accurate, and engineered for demanding tasks, the Elumatec AKS 134 is a proven performer in the architectural aluminium industry. Elumatec AKS 134 for sale Aluminium notching saw Ireland Curtain wall notching machine Elumatec saw for curtain wall systems Notching saw for aluminium profiles Elumatec AKS 134 specifications 550mm notching saw Double blade notching saw Used Elumatec machinery Aluminium construction saw Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 20186/2006/01, travel distance X-axis: 7,200 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 325 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 7,200 mm, feed length Y-axis: 480 mm, feed length Z-axis: 325 mm, controller manufacturer: Elumatec, workpiece length (max.): 7,200 mm, spindle speed (max.): 6,000 rpm, spindle motor power: 5,500 W, number of spindles: 1, number of slots in tool magazine: 8, input voltage: 400 V, type of input current: three-phase, Equipment: rotational speed infinitely variable, 2006 Elumatec SBZ 130 Profile Machining Centre – High-Performance Aluminium CNC Machine 📍 Location: Ireland 🛠️ Machine Type: 3-Axis CNC Profile Machining Centre 📅 Year of Manufacture: 2006 ✅ Condition: Very Good / Fully Operational 🔧 Brand: Elumatec – German Engineering Excellence 🔧 Machine Description: The Elumatec SBZ 130 is a high-precision CNC profile machining centre designed for efficient and versatile processing of aluminium, steel, and stainless steel profiles. With fully automatic 3-axis control and flexible machining capabilities, it's ideal for manufacturers in the window, door, façade, and industrial profile fabrication sectors. 🧰 Included Features & Equipment: Automatic Tool Turret with 8 Tool Positions • Holds standard tools or angle milling heads • Rapid rotation ensures minimal tool change times 2 x Angle Milling Heads – included for advanced profile cutting Automatic Length Measurement – improves precision and workflow Two Independent Machining Zones – for pendulum operation and non-stop production Tool Spindle with Additional Axis Functionality – enhances machining flexibility All Operations Performed with Stationary Profile Bar • Protects profile surface during milling, drilling, and threading Multi-position Pneumatic Clamping System Coolant & Minimum Quantity Lubrication System (MQL) Tool Holders in photos Included This 2006 model is in very good condition, fully functional, and ready to be put into service. 📐 Technical Specifications: X-axis Travel (Longitudinal): 7,200 mm Y-axis Travel (Transverse): 480 mm Z-axis Travel (Vertical): 325 mm Spindle Power: 5.5 kW Max Spindle Speed: 6,000 rpm X Axis Rapid Traverse: 60 m/min Y Axis Rapid Traverse: 30 m/min Z Axis Rapid Traverse: 30 m/min Tool Changer: Automatic 8 position magazine Angle Milling Heads: 2 Angle Milling Heads Speed: 10,000 rpm Control System: Elumatec ELMU with full NC control Machining Capabilities: • Drilling, Routing, Tapping, Notching, Slotting • Machining on 3 sides of the profile without repositioning Clamping System: Pneumatic profile clamps (movable and programmable) Compressed Air Connection: 7 Bar Compressed Air Consumption: 75 L/min with spraying Cooling/Lubrication: Minimum quantity lubrication (MQL) system Operation: Front-loading with safety light curtain 🧰 Machine Includes: Multi-position automatic tool changer Angle Milling Heads x 2 Pneumatic profile clamping system Cooling/lubrication system Operator control console Selection of tool holders as seen in photos 💡 Key Features & Benefits: German-built machine with exceptional reliability High-speed 3-axis control for complex machining tasks Machining without profile repositioning – improved productivity Perfect for aluminium window & door fabrication, curtain wall profiles, industrial extrusion machining Can be integrated into automated production lines Ready to work – tested Elumatec SBZ 130 for sale used Elumatec machining centre Blsdewwau Nspfx Akaeg CNC aluminium profile machining centre 3 axis profile router, aluminium window door CNC machine Elumatec CNC machine Ireland CNC notching machine used façade profile machine high-speed CNC profile mill Elumatec SBZ CNC profile router Notes: *Specifications are given in good faith but not guaranteed*