Used Profile Bending Machines for sale (68,294)

Condition: used, functionality: fully functional, Hydraulic mandrel tube bending machine Complete bending sets with bending mandrels and bending shoes: Ø 18, 20, 22, 25, 2 x 30 + 35 mm Additional bending mandrels without bending shoes: Ø 28, 2 x 38 + 42 mm Pre-assembly device with hydraulic cylinder Hydraulically driven deburring unit for tubes, inside and outside, from 6 - 48.3 mm Nwodpfx Abewnrt Sokoh Max. tube feed length: 3000 mm Machine weight: approx. 700 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 2017, working width: 310 mm, power: 32 kW (43.51 HP), Cross Profiling Machine / End Profiling Manufacturer: Marinus Model: Powermax Endmatcher 300 Nodpfey H U Upex Abkjwh Year of manufacture: 2017 Well-maintained machine, sourced from a parquet manufacturing facility The Powermax Endmatcher is designed for end processing (tongue and groove machining) of floorboards, decking boards, and cladding profiles in a through-feed operation. Workpiece width: approx. 60 – 310 mm Workpiece length: min. approx. 450 mm Workpiece thickness: approx. 10 – 45 mm Control via touch panel at the machine infeed Air pressure: 6 bar Power supply: 400 VAC / 50 Hz Total connected load: 32 kW Dimensions: approx. 3000 x 1800 x 2000 mm (L x W x H) Weight: approx. 3500 kg Some information taken from the manufacturer's brochure.

Condition: used, functionality: fully functional, Year of construction: 1997, 5-axis CNC tube bending machine BLM Dynamo - 0 Serial number: 605970300001 Year of construction: 1997 Nsdpet R Tgiofx Abkswh Voltage: 380V 50HZ Machine weight: 1500 kg Control system: DOC 85C BLM bar loader BLM CARM 7 Serial number: 340040102059 Year of construction: 2004 Weight: 405 kg Without conveyor belt Without protective grid TECHNICAL DETAILS Number of axes: 5 Average output: ~ 2400 bends/h Bending capacity round tube R=45 kg/mm²: 4 - 12.7 x 1.5 mm Bending capacity round tube R=35 kg/mm²: 4 - 14 x 1 mm Bending capacity round tube Al/Cu/Ms: 4 - 18 x 1.25 mm Bar feeder: BLM Carm 7 (year of manufacture: 2004) Positioning speed X-axis: 2000 mm/s Bending speed H/Z Y-axis: 500 °/s Turning speed Z-axis: 900 °/s Turning speed Z-axis: 100 °/s Positioning speed T-axis: 500 mm/s Measuring tolerance X/T axis: ± 0.1 mm Measuring tolerance Y/Z/Q axis: ± 0.1° Maximum range at maximum acceleration X-Y-Z: 1000 mm - 90/90/0° - 0/180/0° with tube 18 x 1.25 mm MACHINE DETAILS Voltage: 380 V, 50 Hz Hydraulic pressure: max. 120 bar Machine weight: 1500 kg Control system: DOC 85C Ex location Dortmund, free truck loading

Condition: new, Machining center with 4 CNC-controlled axes for machining profiles made of aluminum, PVC, and steel Comparable to Emmegi, Elumatec, Fom, Pertici, etc. Machine frame in a stable welded construction, stress-relieved by annealing, with hardened linear guides Protective cabin covering the entire machining length Pneumatically opening protective door Milling spindle: 3.8/4.6 kW S1/S6 Nwjdpfx Abjwrcwpjkeh 3.0/3.7 Nm S1/S6 max. 18,000 rpm, air-cooled with ISO 30 tool holder with minimum quantity lubrication system for the tools with level monitoring Tool magazine: 5 positions, on the left side in the machine bed, for holding drilling, milling, threading tools, angle head, and disc cutters up to Ø 150 mm Workpiece clamping: 4 pneumatic profile clamps, clamping range up to 250 mm automatic positioning via device on the Z-axis Workpiece positioning: one pneumatic reference stop each on the left and right on the A-axis Travel distances: X-axis 3500 mm Y-axis 370 mm Z-axis 348 mm A-axis ±90° Travel speeds: X-axis 70 m/min. Y-axis 30 m/min. Z-axis 30 m/min. A-axis 60°/sec Maximum working areas: X-axis 3270 mm Y-axis 250 mm at 0°, 116 mm at ±90° of the A-axis Z-axis: 170 mm at 0°, 200 mm at ±90° of the A-axis Operating software: CAD/CAM in 3D technology (option, included!) Programming system according to ISO standard Functionality: Linear and circular interpolation on two axes (X-Y) Three-sided machining by swiveling the A-axis 90°-0°-90° End face machining using disc cutters Operating modes: One profile bar over the entire machining length Two profile bars in divided machining length Lubrication system: Automatically controlled central lubrication for all axes, ball screws, and guides, with level monitoring Operation: 18.5" TFT Mouse + keyboard Connection data: Electrical: 400 V/50 Hz (3-phase + N + PE), 16 A, Delivery without power cable Pneumatic: Pressure 6 - 8 bar Dimensions and weight: Length: 5800 mm Width: 1640 mm Height: 2000 mm Weight: 2000 kg incl.: Graphical programming software CM3D/CAD3D Barcode reader Teleservice with remote maintenance/diagnosis for 1 year after commissioning

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1988, working width: 3,000 mm, type of crowning: manual, sheet thickness (max.): 6 mm, total length: 2,500 mm, total width: 4,500 mm, total height: 2,500 mm, Equipment: documentation/manual, emergency stop, Hydraulic pivoting bending machine Manufacturer: KRAMER, Type: AMautVIIhy3000 Year of manufacture: 1988 Technical data Manufacturer: KRAMER Type: AMautVIIhy3000 Year of manufacture: 1988 Usable length: 3030 mm Sheet thickness: 6 mm Stroke: approx. 300 mm Dimensions: approx. L x W x H 4.5 x 2.5 x 2.5 m Equipment: • Bending angle adjustment via potentiometer! Nwjdpfoy T R Swex Abkeh • Controlled rear stop, 1000 mm • Segmented gooseneck tool • Bending rail + reinforcing rail • Manually adjustable crowning • Documentation All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: good (used), Year of construction: 1996, Tube diameter: 4-28 mm Wall thickness: / mm Minimum bending radius: 1.5 x D - 2.0 x D mm Control: Siemens LOGO Delivery rate: 4.5 l/min Max. bending angle +/-: 190° Nwedpfx Abjzd Smnskeh Nominal pressure: 250 bar Operating pressure: 3095 bar Delivery rate: 4.5 l/min Total power requirement: 1.5 kW Drive: Hydraulic cylinder and roller chain

Condition: good (used), Year of construction: 2000, Technical specifications: Nwodpfxjzbmw Do Abkoh Working width: 6100 mm Max. bending capacity: 10.0 mm Max. bending angle: 8.0 mm Diameter of upper roller: 470 mm Diameter of side rollers: 250 mm Hardened rollers Conical bending unit through angled positioning of the two side rollers Mobile control panel Hydraulic folding bearings Motor power: 31 kW Dimensions (length x width x height): approx. 8000 x 3200 x 2900 mm Weight: approx. 30 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Technical specifications: Retrofit in 2026 Working length: 2550 mm Max. bending capacity: 6.0 mm Bending allowance: 4.0 mm Diameter of upper roller: 200 mm Diameter of lower roller: 180 mm Hydraulic folding bearing Taper bending device Control panel with digital display Motor power: 5.5 kW Dimensions (length x width x height): approx. 3600 x 1150 x 1250 mm Njdpfszbcwmex Abkowh Weight: approx. 4.5 tons Condition: Very good, retrofit in 2026 The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: ready for operation (used), Pipe Bender, Tube Bending Machine, Profile Bending Machine, SHS/RHS Bender, Used Machine Manufacturer: Schwarze-Wirtz Model: Perfect H135 Dimensions: 6115 x 2870 x 1300 mm Bending Capacity: Nwodpfx Aswhmv Usbksh Round tube: Ø 130 mm, bending radius: 500 mm Square tube: 30 mm, radius: 380 mm 45 mm, radius: 500 mm 50 mm, radius: 500 mm 70 mm, radius: 500 mm 90 mm, radius: 500 mm Bending Angle: up to 180° Electrical Specifications: 380 V

Condition: used, Rebar Bending Machine, Reinforcing Steel Bender, Alba DAR 45, Used Machine Manufacturer: Alba (Spain) Type: DAR 45 (Dobladoras Automáticas) Overall dimensions: Width: 1300 mm Depth: 800 mm Height: 830 mm Weight: 555 kg Electrical data: 400 V Maximum bending diameter: Ø 45 mm (single bar, for 450 N/mm² steel grade) Nwedpfx Asy Rh Rfsbkoh Bending speed: 2 speed settings (higher speed for smaller diameters)

Condition: used, Rebar Bending Machine, Reinforcing Steel Bender, Peddinghaus Special 32, Used Machine Manufacturer: Peddinghaus Type: Special 32 Overall dimensions: Width: 660 mm Depth: 850 mm Nsdpfx Abey R A Niokswh Height: 830 mm Weight: 325 kg Electrical data: 400 V; 7 A Bending capacity: max. Ø 32 mm (single bar) Bending speed: approx. 10 rpm Motor power: 2.2 kW Control system: Automatic bending angle adjustment, foot pedal start

Condition: used, operating hours: 16,158 h, Rebar Bending Machine, MEP FOCUS 12 Rebar Bending Machine, Used Machine Manufacturer: MEP S.p.A., Italy Model: FOCUS 12 Year of manufacture: 2006 Overall dimensions: Nwodpfx Aezaq Dljbksh MEP bending machine: Width: 3660 mm Depth: 1620 mm Height: 2350 mm Decoiler: Width: 4820 mm Depth: 1980 mm Height: 1460 mm Bending capacity: 6–12 mm Accessories: 5 pcs wire coils 1 pc 8 mm bending tool Programmability: One of the major advantages of the "Focus" series is that the bending angles can be set via an electronic control panel. There is no need to manually adjust mechanical stops as on older Hungarian machines. This significantly speeds up production when, for example, 100 identical stirrups need to be bent. The control system retains its programs even if the machine remains without power for months or even years. The software runs on a dedicated computer. MEP provides full service and technical support for all of its machines, regardless of their year of manufacture.

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 14151, overall weight: 3,485 kg, working width: 3,100 mm, sheet thickness (max.): 2 mm, We are offering this used Göteneds K25-30 A 1200 bending machine, manufactured in 1996. Model: K25-30 A 1200 Working area: 3100mm x 2.0 mm Manufacturing number: 14151 Year of manufacture: 12/96 Weight: 3485 kg The machine received a new gearbox and a new display some time ago. The machine is in good used condition and has some minor inaccuracies due to its age. However, it is perfectly adequate for many applications. Nodpozdzxgsfx Abkjwh If you have any questions or require further information, please send us a message or call us.

Condition: used, functionality: fully functional, control type: manual, 3-Roll Round Bending Machine 2500 x 16 mm, hydraulic Manufacturer: KUMLA Type: PV 7 H Serial Number: 804, overhauled in 1987 The machine has a very robust design and was only used for single-layer bending. Max. bending length: 2500 mm Max. sheet thickness: 16 mm Taper bending device Upper roll diameter: 324 mm Lower roll diameter: 305 mm Hydraulic roll adjustment Nwedpfx Abozba Atekeh Dimensions: L x W x H = 5000 x 1600 x H 1900 mm Working height: 1000 mm Additionally, a platform can be purchased for use around the machine.

Condition: like new (used), Year of construction: 2001, Technical data: Working width: 2050 mm Max. bending capacity for normal steel St40: 4.0 mm Max. edge bending for normal steel St40: 2.0 mm CNC control: MG Diameter of top roller: 140 mm Diameter of side bottom rollers: 105 mm Diameter of central bottom roller: 130 mm Conical bending device Working height: 800 mm Mobile control panel Hydraulic folding bearings Nwsdpfoza D U Djx Abkoh CE marking Motor power: 3 kW Dimensions (length x width x height): approx. 3400 x 1200 x 1200 mm Weight: approx. 2.5 tons Condition: Very good condition, very little use The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: new, neu ca. 8 Wochen ab Auftragse Türkei 7300 € 140.89 € 10 to 185 mm 150x8 mm 450x900 mm 150 mm 60 mm Nodeynmzcspfx Abkswh 10 mm/s 10 mm/s 1.1 kW 915 mm 900 mm 450 mm 1130 mm 250 kg Stroke adjustment with digital display Manual and automatic operation mode Tool holder pins and tools hardened and ground Bending tool Foot pedal OPTIONS: Cutting-, punching- or pipe bending tools on request

Condition: new, neu ca. 8 Wochen ab Auftragse Türkei 12900 € 247.68 € 40 to 285 mm 200x24 mm 660x1250 mm 250 mm 80 mm 10 mm/s Nodpfx Ajwiq N Ijbkowh 10 mm/s 4 kW 930 mm 1250 mm 650 mm 1250 mm 1100 kg Stroke adjustment with digital display Manual and automatic operation mode Tool holder pins and tools hardened and ground Bending tool Foot pedal OPTIONS: Cutting-, punching- or pipe bending tools on request

Condition: ready for operation (used), Year of construction: 2012, Machining length: 6500mm, equipment: fencing, control cabinet, Hagen & Göbel spindle unit, power: 5.5kW S1/7.9kW S6, speed range: 100 to 6000/min continuously variable, tool holder: SK30/DIN69871 form A, drilling capacity in steel 60/aluminium: 18/20mm, thread in steel 60/aluminium: M14/M16, spindle throat: 150mm, vertically opening protective cabin, pneumatically movable up and down, operation via push button, coolant system emulsion AP3000/6500, delivery rate: 70l/min, tank capacity: 150l, support table with T slot strips size 16, ten clamping cylinders, support surface: 6500x330mm, equipped with ten double acting pneumatic cylinders (50x40), tool changer plate magazine, travelling plate magazine for eight tools, change time: approx. 8 to 10s, max. tool holder diameter: 50mm, max. length for tool holder with tool: 250mm, Heidenhain HR130 handwheel integrated in control housing, chip tray, 6 removable chip drawers, pendulum operation for normal table, protection by light barrier, device for efficient production of series parts, machine table with separating discs for 900mm safety zone, spray mist device, tank capacity: approx. 1l, laser technology, retrofit AP6500 HK laser technology. Control: HEIDENHAIN iTNC530, length: 8000mm, width: 2400mm, height: 2450mm, weight: 4.5t, with documentation. An on site inspection is possible. Nodpszcfi Uefx Abkswh

Condition: used, Year of construction: 2022, sheet width:1550 mm plate thickness:4 mm pre-bending:6 total power requirement:2,2 kVA weight of the machine ca.:1,42 t dimensions of the machine ca.:2,7 x 0,75 x 1 m roll feed:3,5 m/min Motorised blade roller 3 rolls Material width 1550 mm Nwjdpfx Abet Hmlqokjh Material thickness max. 4 mm Shaft diameter 140 mm Roll feed 3,5 m/min

Condition: used, Year of construction: 2020, operating hours: 6,493 h, machine/vehicle number: TB25A-008, overall weight: 650 kg, total length: 2,600 mm, total width: 1,000 mm, total height: 1,200 mm, power: 1.4 kW (1.90 HP), Tubobend 25 Machine Data Designation: Tubobend 25 Operating Hours: 6493 h Weight: approx. 650 kg Dimensions: approx. 2600 × 1000 × 1200 mm Technical Data Control System: Siemens SIMATIC Pipe Diameter (max.): 25.0 × 3.0 mm (E 235 with CLR = 2 × D) Bending Radius Rm (max.): 75 mm Bending Radius Ri (min.): 25.0 mm (with bending mandrel 40 mm) Effective Bending Angle (max.): 180° (+10° overbending) Bending Speed (max.): 58°/s Bending Accuracy: ± 0.2° Dimensions (L × W × H): approx. 5,650 × 1,000 × 1,250 mm Weight: approx. 770 kg Connected Load: 1.35 kW (installed) Mains Voltage: 400 V / 50 Hz / 3 phases Mains Fuse: CEE 16 A Color: RAL 7021 Black-Gray / RAL 5015 Sky Blue Performance Data Connected Load: 1.4 kW Bending Data Bending Capacity (Mild Steel): Ø 25.0 × 3.0 mm Max. Bending Radius: 75 mm Nwedpfx Aey H I R Robkjh Max. Bending Acceleration: 58 °/s Bending Accuracy: ± 0.2°

Condition: used, functionality: fully functional, YEAR 1990 Power rating 15 kW Shaft diameter ø 120 mm Roller diameter ø 400 mm Resistive moment Cm 333 Cm3 IPN capacity 240 x 106 mm Capacity HEB 120 x 114 mm Capacity Pipe wall thickness x Ø 139 x 5 mm Nwsdpfxoummkas Abkeh Capacity flat 125 x 25 mm Hydraulic / Mechanical Hydraulic

Year of construction: 2024, condition: new, MRB-S Series Technical Specifications (See Images) Standard Equipment CE compliant Conical bending Motorized back roller Additional control panel for upper and lower rollers operated by the chassis. SAE 1050 steel rollers Induction-hardened rollers, Stress-relieved steel construction, on 2.5 and 3m machines, support system, braking system for precise bending, Digital display. Motorized back roller with tension Optional Equipment Motorized lower roller mounting, ground rollers Extended rollers for profile bending, Special rollers for profile bending, Special packaging for international shipments. MRB Series: Technical Specifications (See Images) Standard Equipment CE standard Digital display Conical bending Motorized back roller with tension Additional control panel for upper and lower rollers, operated by the chassis. Chassis operated. SAE 1050 steel rollers, Induction-hardened rollers, Stress-relieved steel construction, Braking system for precise bending. Optional Equipment Motorized lower roller with tension, ground rollers Extended rollers for profile bending, special rollers for profile bending, Special packaging for international shipments. Everything can be configured according to your requirements, with very short production and delivery times. Nsdsfin E Depfx Abkswh Upon request, we will gladly provide you with further information. Durma Maschinen GmbH is part of the internationally successful Durmazlar Group, which exports new, high-quality sheet metal processing machines to the entire world and has established itself as one of the world's largest manufacturers of sheet metal processing machines with its headquarters in Turkey. With over 60 years of experience in the research and production of machines for sheet metal processing, producing 8,000 machines annually in three technologically advanced manufacturing facilities on a total area of 150,000 m², the Durmazlar Group and its DURMA Maschinen are now among the internationally renowned manufacturers in their industry, with products distributed in 120 countries. With its branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact person from the Durmazlar team, providing you with competent advice and assistance when it comes to machines for sheet metal processing. Our demonstration center gives you the opportunity to gain an overview of our machines on site, to be convinced up close by the quality and precise technology of our products, and to receive the best possible advice that is tailored to your company's goals. Our task is to be your direct contact person on site and to offer you services relating to training and customer service. We would be happy to support you from Germany – from consulting, through purchasing, and throughout the entire life cycle of your machine. With our German branch, we are always there for you locally, so that we can react quickly and efficiently when you need us. Here, we are your reliable partner for technologically advanced solutions when it comes to sheet metal processing.

Year of construction: 2024, condition: new, Bending capacity: 6 mm Bend allowance: 5 mm Bending capacity: 6 mm Nsdpfx Ajftdh Iebkowh Bend allowance: 5 mm Bending length: 2,030 mm Roller diameter: 170 mm Motor power: 4 kW Length: 3,600 mm Width: 1,020 mm Height: 1,120 mm Weight: 2,400 kg The machine can be inspected and demonstrated at our showroom in Staufenberg at any time by appointment. Other machines are available for demonstration at our location in Staufenberg. Upon request, we will be happy to provide you with further information.

Year of construction: 2024, condition: new, Control unit – with NC control Conical bending unit Nwedpfx Abedzzyfoksh Side roller positioning synchronized electronically via PLC Safety mechanism for welding (welding capability) on the machine Machine body made of stress-relieved, annealed steel 4-roller drive system – upper and lower rollers driven by hydraulic motor via planetary gearbox, synchronized (ᐳ 430 mm) Electrical and hydraulic protection against overloads Lower roller pressure hydraulically adjustable Hydraulic roller brake, prevents the sheet metal from slipping back Hydraulic pivoting of the upper roller bearing for easy removal of the formed sheet metal Safety wire Induction-hardened rollers (HRC 54), manufactured with a slight bulge Variable speed Bending length: 2050 mm Bending capacity: 13 mm (d x 5) Bending capacity: 10 mm (d x 1.5) Upper roller: 230 mm Lower roller: 210 mm Maximum roller spacing: 30 mm Length: 3830 mm Width: 1160 mm Height: 1200 mm Motor power: 11 kW Weight: 4700 kg

Condition: used, 12-piece die block for GEWA press brake Bending tool for press brake, lower tool Type: 0255/14 V-block size: 16 mm for 90° V-block angle: 88° Die depth: approx. 8 mm Height: 120 mm Max. pressure per meter: 100 t/m Die base width: 60 mm Total length: 4175 mm Nwedpfxjwbvmij Abkeh Segment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mm Weight: 110 kg Very good condition