Used Press Kb9534 for sale (12,395)

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,000 kg, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, volume flow: 795 m³/h, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Nodjzbxwispfx Abkjwh Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: reconditioned (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, pressing force: 70 t, overall weight: 9,500 kg, year of last overhaul: 2025, filling opening width: 420 mm, filling opening length: 1,250 mm, Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Nedpfxezbxvls Abkswh Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet offcuts, sheet steel as well as aliminium, brass and copper waste. Condition of the baler: The packing press has been fully overhauled in our workshop. The press is in very good condition; please see the demonstration video following the overhaul. The machine sustained transport damage whilst being moved. The control cabinet was damaged and slightly dented by a forklift truck, and the main switch (on/off switch) was damaged. These damages are reflected in the significantly reduced sale price and must be repaired by the buyer at their own expense. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2015, functionality: fully functional, Used Durma press brake Type AD S 30135 Capacity: 3050 x 135 tons Cybelec ModEva 15T CNC control Nwsdpfx Ajza U Twsbkjh Y1, Y2, X, R, Z1, and Z2 axes CNC controlled CNC crowning Amada / Euro clamping Includes a set of tooling

Condition: good (used), Year of construction: 2006, Used 4-meter CNC press brake by Bystronic Type PR 200 4100 Capacity 4100 x 200 tons Cybelec CNC control Y1, Y2, X, R, Z1 and Z2 axes Njdpfxeza U Nro Abkswh Hydraulic upper and lower clamping Hydraulic CNC crowning Includes a set of tools

Condition: excellent (used), Year of construction: 1995, Like-new pneumatic punch / stamping press from a training workshop, with a base frame. Punching force: 5 t Nedpfx Aozcpv Sobkjwh Double strokes/min at max. stroke: 30 Stroke length: 40 mm Installation height: 240 mm Overhang: 110 mm Table size: 250 x 200 mm Operating pressure: 10 bar Dimensions L x W x H: 250 x 370 x 1450 mm Weight: approx. 100 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1950, pressure 120 t draw back pressure 20 t piston stroke 500 mm dayligth 600 mm usable table size 800 x 800 mm range L-W-H ca. 2,55 x 1,14 x 3,34 m weight ca. 3,5 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery Nwodpfx Aox Sr Evjbkoh if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: good (used), Year of construction: 1991, Used press brake from Safan Type CNCS 110 4300 Nwedpfx Abjza T Dbeksh Capacity 4300 x 110 tons Control system updated, ESA CNC control Y1, Y2 and X axes CNC controlled Equipped with a flat-bedding system / bending / hemming function Includes a set of tools

Condition: reconditioned (used), functionality: fully functional, year of last overhaul: 2026, type of input current: three-phase, overall weight: 350 kg, input voltage: 400 V, total length: 500 mm, total width: 520 mm, total height: 1,200 mm, input frequency: 50 Hz, DGUV certified until: 08/2027, Dough divider and forming machine Nodjuav Itopfx Abkewh Record roll press Newly revised dividing head New stainless steel knife Connection: 400V, 16A CEE plug Dimensions: 520 x 500 x 1200 mm (W x D x H) Used machine, refurbished with warranty + spare parts service Option: ONLY AVAILABLE FROM US! New forming plate Delivery service Stainless steel platform Maintenance contract Training and commissioning You will find a large selection of roll presses only with us!

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 08/2027, type of input current: three-phase, overall weight: 500 kg, year of last overhaul: 2025, Eberhardt Optimat S 4 Roll Press Stainless steel design Simple manual operation Njdpfxjy Hwmhe Abkjwh Stand-alone machine, dough divider and rounding machine Top-quality roll press with 3 rounding plates TAS system, 30-piece For round and square rolls DGUV V3 certified – available only from us Connection: 400 V, 16A CEE plug Used machine We have many other bakery machines in stock!

Condition: good (used), Year of construction: 2015, operating hours: 1,932 h, functionality: fully functional, Bale press Presto CC 50 M, year of manufacture 2015, with lifting and tilting device. Technical data: Manufacturer: Presto Type: CC 50 M Year of manufacture: 2015 Operating hours: 1932 Pressing force: 50 t Cycle time: 52 s Drive power: 7.5 kW Feed opening: 1030 x 1100 mm Feed volume: 0.85 m³ Tying: 3-wire, manually Throughput at a bulk density of: 35 kg/m³ - 1.3 t Nwjdpfjzc Hz Esx Abksh 60 kg/m³ - 1.7 t 100 kg/m³ - 2.2 t Bale dimensions: 750 x 1100 mm Bale weight: 300 kg Dimensions: 4705 x 1680 x 2540 mm (L x W x H) Machine weight: approx. 4000 kg Materials: Paper, cardboard, film The operating manual is available in German. Note: The machine is in good condition. It has been inspected and tested at our facility in 28816 Stuhr. You can find the video on our website or our YouTube channel. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or any errors. This offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: good (used), Year of construction: 2017, functionality: fully functional, Baler Presto CC 40 M, Year of manufacture: 2017 Technical Specifications: Manufacturer: Presto Model: CC 40 M Year of manufacture: 2017 Pressing force: 40 t Cycle time: 34 s Drive power: 15 kW Feed opening: 1080 x 1100 mm Feed volume: 0.85 m³ Binding: 4-fold, polyester strapping, manual Throughput rate at bulk density of: 35 kg/m³ - 1.8 t/h 60 kg/m³ - 2.5 t/h 100 kg/m³ - 3.1 t/h Bale size: 750 x 1100 mm Bale weight: 400 kg Dimensions: 3650 x 1590 x 2010 mm (LxWxH) Machine weight: approx. 3,800 kg Materials: Paper, cardboard, film The baler is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Operating instructions and CE declaration are available. Note: Channel discharge is fully automatic and regulated. Please note: All technical data is based on the manufacturer's information. We do not accept liability for the information provided or any possible errors. Nodpfx Abjzc Hy Uokewh This offer is non-binding, subject to prior sale, and may be revoked at any time. Inspections are possible by appointment. Sale is ex-works, prepayment required, without warranty or guarantee.

Condition: good (used), Year of construction: 2003, functionality: fully functional, Press force: 135 t Bending length: 4100 mm Frame width: 3600 mm Nedpfjzg A D Njx Abkjwh Control system: DELEM Rapid traverse speed: 100 mm/sec Bending speed: 10 mm/sec Total power requirement: 15 kW Machine weight (approx.): 11,700 kg

Condition: used, 1x bending knife from a VOEST press brake Length: 4050 mm Weight: approx. 115 kg For further dimensions see pictures Nedszcgh Ejpfx Abkowh

Condition: like new (used), - Capacity: 1600 x 50 tons - NC control (touchscreen) - 2 hydraulic cylinders - Foot pedal operation - Light curtain safety system - Emergency stop - Lighting Nwodpfx Aszfv Ufsbkeh - Documentation - 400V

Condition: ready for operation (used), Jenny ERP-25 straightening press Technical data: 25 tons of straightening force, ram stroke 150 mm Series 86.545 Weight 1,300 kg Note: Fully functional, including straightening unit for shafts. Nwodpfx Aozfx Iusbksh

Condition: good (used), Pressure 63to Stroke -400mm Distance ram-table 700mm Table size 1800x500mm Nedpfx Abjch Dacskswh MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2010, AMADA MODEL HFT 8025 80 tons capacity x 2500 bending length hydraulic downstroking press brake complete with CD 2000 4 AXIS colour graphic cnc control, Nodpsu A Dgrefx Abkewh ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFT 8025 downstroke CNC Press brake Year 2010 Tonnage 100 KN Type CD 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 2500 mm Open height 470 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 7.5kw Weight 6100 kg Bed Length 2500 mm Bed Width 60 mm Open Height 470 mm Throat Depth 420 mm CNC Control Backguage Stoke (X axis) 700 mm/s Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Year of construction: 1992, condition: used, Pressing force 40 t Njdpfx Abjzdvcaekswh Effective stroke 500 mm power capacity 17 kW tracking travel 48 mm Overrun time 110 ms safety distance 176 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: good (used), Year of construction: 2006, functionality: fully functional, power: 6 kW (8.16 HP), stroke length: 200 mm, Hydraulic press brake Manufacturer: AMADA, Type: HFP 50-20 Year of manufacture: 2006 Nwjdpfezdtrxsx Abkeh Technical data Manufacturer: AMADA Type: HFP 50-20 Year of manufacture: 2006 Usable length: 2090 mm Capacity: 50 t Distance between uprights: 1,665 mm Stroke: 200 mm Overhang: 400 mm Installation height: 470 mm Motor power: 6 kW Dimensions: approx. L 2.95 x W 1.60 x H 2.45 m Weight: 4.7 t Equipment • Controlled axes: X, R, Z1, Z2 • FIESSLER light curtain at the front • Amada upper tool clamping system • CNC control 3D AMNC graphic • Rear protective device (swiveling grating doors) • Swiveling control panel – front left • Technical documentation • Tools: o Upper tool, straight, 28°, length 2,050 mm, sectional o Upper tool, slightly bent, R1, H 100 mm, L = 2,100 mm, sectional o Lower tool V25/30°, length 2,050 mm o Lower tool, pressure pad, length 2,050 mm o Lower tool, 4-way block die, L = 1,800 mm, sectional All information is subject to change without notice. A demonstration under power is possible at any time in our showroom.

Condition: good (used), Year of construction: 2012, functionality: fully functional, Strautmann bale press, type BaleTainer, pressing force 60 t, year of manufacture 2012 Technical data: Manufacturer: Strautmann Umwelttechnik Type: BaleTainer Year of manufacture: 2012 Pressing force 60 t Total connected power 30 kW Bale dimensions 1,100 x 1,100 x 800 mm (W x D x H), 3 straps Bale weight up to 400 kg (3 straps) Binding: 4-fold vertical Dimensions: 5,348 x 2,113 x 2,752 mm (L x W x H) Weight approx. 7,280 kg Nwjdpfxezcuz Te Abkeh Materials: Paper, cardboard, PET bottles, film Note: The press is in good working order and has been inspected and tested. A video can be found on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any errors that may occur. The offer is subject to change, subject to prior sale, and may be withdrawn at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Year of construction: 1980, operating hours: 7,663 h, condition: used, pressure 320 t throat 800 mm stroke 630 mm distance between table / ram max. 1000 mm ram head dimension 710 x 600 mm table-size 800 x 1200 mm work height max. 1015 mm quantity of oil 1100 l Number of working hours 7663 h weight of the machine ca. 15 t dimensions ca. 1600 x 2200 x 4800 mm dimensions of switch cabinet ca. 1200 x 400 x 1800 mm Nwodpfxod Ih Nre Abkjh Tested for function. During the test run it is noticed that the press ram not 100% leak-proof. In addition, the cable for manual operation was mended several times. Upper cover is missing, since this was dismantled by the customer due to crane use. Operating instructions and electrical plans available.

Year of construction: 1978, condition: used, pressure 2000 /1000* t distance between columns 2650 mm stroke 500 mm column travel -side 500 x 1000 mm diameter of piston 710 mm number of pistons 2 distance between table / ram 1000 mm operating pressure 130 / 230 bar dayligth 800 mm table length 2500 mm table width 1600 mm table height 250 mm draw back pressure 500 kN Nwodjd Ih Ncopfx Abkeh number of T-slots 8 turning speeds 1500 U/min rapid speed 120 - 140 mm/min closing speed max. 120 - 140 mm/sec. return of plunger by small single cylinders 100 - 110 mm/sec hydraulical ram locking cutting sound absorber 300 t die cushion capacity 200 t die cushion stroke 250 mm speed of die cushion 100 mm/sec frequency 50 Hz voltage 380 V quantity of oil 2000 l total power requirement 93 kW weight of the machine ca. 100 t dimensions of the machine ca. 5000 x 2500 x 7200 mm transport measurements ca. 6500 x 3750 x 2190 mm 1991 assembly of a die cushion, pressure reduction to 1000 tons reason: tools were only constructed to 1000 tons press has run in a perfect condition until disassembly. It was replaced by a press line. important for UVV: press has a hydraulic ram locking!

Condition: used, pressure 200 t distance between columns 1600 mm max. ram stroke 600 mm dayligth 900 mm table width 1600 mm table depth 1300 mm table height 1060 mm ram surface 1600 x 1300 mm T-slots Din 650 / 22H12 rapid traverse 400 mm/s Nsdpjg S R Twefx Abkowh return speed 325 mm/s pressing speed 42 mm/s bei 40% mm/sec pressing speed 20 mm/s bei 100% mm/sec die-cushion pressure 800 kN die cushion stroke 150 mm speed of die cushion auf 68/ ab 225 mm/s

Condition: used, Year of construction: 1994, punching force max. 50 t throat 510 mm stroke 32 mm stroke - stepless adjustable 10 - 32 mm no. of strokes 35 bei 10 mm Hub/min Working height 1070 mm daylight 350 mm table width 255 mm dimensions ca. 1080 x 650 x 1680 mm material layer 630 X 535 weight ca. 1400 kg Scraper, height-adjustable and removable, with interchangeable plate Hydraulic low-pressure finder for foot switch operation Nedpfxjyrhyuj Abkswh Two-stage foot switch and electrical controls Integrated hydraulic unit With punching saddle for dies no. 3, up to Ø 32.5 mm Quick-change device for punches 2 and 5 up to Ø 31.5 mm Peddinghaus blue series with material support table no. 513, dimensions 630 x 535 mm

Condition: used, Year of construction: 2001, pressure 70 -800 kN Nwedpsyz Dgwjfx Abkjh chamfer lenght 2505 mm distance between columns 2125 mm Control OP 2000 controlled axis 7 throat 420 mm stroke 200 mm dayligth 470 mm table width 60 mm table height 960 mm ajustment speed 100 mm/sec working feed 10 mm/sec return speed 100 mm/sec weight of the machine ca. 6,3 t Patented Amada technology ensures absolutely correct bending results without bombing device