Used Planax Perfect Binder for sale (2,294)

Condition: used, Year of construction: 2026, New demonstration machine! General technical features: - Control: 7.0" touchscreen ConnectTouch control - Cutting height and cutting angle electronically controlled, digital input of cutting height and angle (controlled positioning of the motorized axes) and movement of the motorized axes in hold mode (axis movement via push button); display resolution: 0.1 mm or 0.01°; repeat accuracy ± 0.05 mm or ± 0.005° - Weight: approx. 1,600 - 2,200 kg - Table size: 860 mm x 1,270 mm in gray cast iron, table extension as standard across the entire table width - Table height: 900 mm - Stand: The machine stand is a stable, thick-walled composite structure, implemented in this form and perfection exclusively by MARTIN. The intelligent combination of the two materials, steel and concrete, creates a high-quality stand that is unsurpassed in terms of stability, damping capacity and torsional stiffness. - Tools: Diameter 250 - 450 mm, optionally up to 550 mm, main saw blade ø 30 mm with additional holes, scoring saw ø 36 mm, tool cutting width max. 20.0 mm for machines with single-sided tilting, 6 mm for machines with double-sided tilting; saw blades up to 350 mm can be lowered under the table. Special tool diameter max. 400 mm, weight max. 12.0 kg - Tool change: Quick-change system ProLock - Tool tilt: 0° to + 47°, tilting only possible with saw blades up to 6 mm cutting width - Cutting height: 0°: max. 155 mm / saw blade ø 450 mm; T7710/1: +45°: 106 mm / ø 450 mm; T7710/2: +45°: 104 mm / ø 450 mm; -45°: 88 mm / ø 450 mm; optionally 123 mm / ø 550 mm - Motor: State-of-the-art synchronous motor SynchroDrive with large power reserves in energy efficiency class IE4 - Motor power: 5.5 kW, due to its design, the motor can be overloaded several times its rated power for a short period of time and thus offers large power reserves - Speed: Continuously variable 1,000 - 5,000 rpm - Control panel: The control panel is at eye level and is rotatably mounted around its vertical axis. In addition, it can be swiveled to the right, so that larger components can also be processed easily - Rip fence: Standard length 3,000 mm, table length corresponds to cutting length; position-independent locking; guides hardened, wear-resistant, self-cleaning; table edge replaceable; made of anodized aluminum - Length stop: Made of anodized aluminum with continuous support, fine adjustment for both flap stop elements; dimension display via scale with magnifying glass; cutting length 95 - 2000 mm, extendable up to 3220 mm - Cross table: Made of powder-coated steel, workpiece support in anodized aluminum, two sliding supports for extending the support area; length stop can be placed in the front and rear position without lifting; one-hand clamping on the support surface 1340 x 650 mm - Surfaces: Stand: Stand with high-quality powder coating, Cast iron: Table surface finely milled, Aluminum: Aluminum components anodized - Protective cover / extraction: Height-adjustable protective cover incl. interchangeable rear part for miter cuts; protective cover for saw blades up to ø 450 mm (optionally 550 mm); extraction connection on the cover: Ø 80 mm, on the machine stand Ø 120 mm; total extraction connection Ø 140 mm; minimum air volume: Vmin 18.5 m3/min at 20 m/s, negative pressure 1,400 Pa - Electrical equipment: Contact for controlling the extraction; motor protection switch and winding protection, undervoltage protection; lockable main switch, 2 EMERGENCY STOP buttons (control panel, stand) Fpodpfez A Hh Usx Aiven

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 12,300 h, HITACHI Hydraulic Excavator type ZX 670 LCH-3 Year of construction: 2011 Hours: 12 300 hours Fpedpfjz Nyd Rsx Aivjn Engine brand: ISUZU Engine power: 345 KW Excavator weight: 67 300 KG Supplied with a bucket in perfect condition. Operating status OK

Condition: excellent (used), Equipment: auto duplex, Konica Minolta Bizhub with FS 533 as new ! Fpedpfx Aegydyreivjn Only 44 copies !!! As an experienced retailer of used copiers, we have developed a real expertise in packing and pallet shipping, to guarantee our customers machines in perfect condition upon receipt. We ship copiers coming from, and maintained by Konica Minolta France. Our company offers the largest range of Konica Minolta production copiers, and handle world-wide deliveries on request. Please do not hesitate to contact us for further information.

Condition: ready for operation (used), Konica Minolta AccurioPress C 4080 with a capacity of 8 million copies. Equipped with: FS 532 RU 518 m PF 707 m IC 609 As an experienced retailer of used copiers, we have developed significant expertise in packing and pallet shipping to ensure that our customers receive machines in perfect condition. We ship copiers that originate from and have been maintained by Konica Minolta France. If you have any questions, please do not hesitate to ask. Our company offers the widest range of Konica Minolta production copiers and handles worldwide deliveries upon request. Please do not hesitate to contact us for further information. Fpedpfx Ajzadfveiven

Condition: excellent (used), Konica Minolta C450i Fjdpfoz Nwkzex Aivjpn In perfect condition Low usage count 80 units available Additional units of C250i/C300i/C360i also available.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, number of slots in tool magazine: 8, total height: 2,500 mm, total length: 11,000 mm, total width: 4,000 mm, overall weight: 2,600 kg, year of last overhaul: 2026, Machining center, fully rebuilt and in perfect working order. 6-month warranty on parts. Please feel free to ask any questions. Fjdpfxez Ny Rwj Aivspn

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Tilting, Electric Winch Equipment: - Additional ramps - Electric winch - Electric tailgate Net price: €39,726.89 / Gross price: €47,275.00 Article number: R7W335602300.02 Technical data: Fpedsz Ri Hdjpfx Aivjn • Brand: Brian James • Model: Race Transporter • Vehicle type: Car transporter • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Interior dimensions (LxWxH): 600 x 235 x 199 cm • Exterior dimensions (LxWxH): 770 x 255 x 264 cm • Loading height of the floor: 58 cm • Permissible total weight: 3,500 kg • Unladen weight: 1,431 kg • Payload: 2,069 kg • Chassis: Low loader (wheels under the body) • Tires: 195/55R10C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • White body made of high-quality, glass fiber reinforced plastic. Lightweight yet extremely stable • Daylight roof running along the entire length of the trailer • Lifting handles at the front and rear • Front access doors on both sides facilitate securing the front wheels • Rear access doors on both sides facilitate securing the rear wheels • Large, double-leaf side doors on the driver's side and passenger side, lockable • Electric full-height and full-width rear loading tailgate • 2x attachable additional ramps made of aluminum, 1.5 m long, for very low vehicles • Rollers in the rear of the vehicle • Interior height 199 cm - Entry height at the rear 188 cm • Side tower dimensions: XXX cm x XXX cm (WxH) • Lower edge of the side door height inside: XX cm • The perforated floor provides high slip resistance and is extremely durable, even under the toughest operating conditions. • Numerous lashing points and a highly load-bearing floor offer flexible securing options and perfect grip. • Wheel stops, fully adjustable with a quick adjustment system. Suitable for lowered vehicles • The closed floor panel made of composite (honeycomb core plastic floor) consists of a honeycomb structure that is covered on both sides with a deck covering. Extremely light and robust. • 2x central floor storage boxes, recessed into the loading area, offer the ideal storage option for heavy, bulky objects. Aluminum lids are included. • Electric winch, 12 V with remote control. 2,250 kg pulling force, with plastic rope and shackle hook. Powered by an on-board battery • Electro-hydraulic tilting function of the loading platform, tilt by pressing a button for an optimal entry angle • Central control unit for tilting function and tailgate, in addition to the remote control. Including battery charge indicator for on-board battery • Very stable steel frame welded • Frame completely hot-dip galvanized • Spare wheel with bracket mounted • Very stable V-shaped drawbar, REINFORCED • ALKO overrun device and parking brake • Reverse automatic function • Steel cast coupling head with integrated high-security lock ALKO • Plastic fenders • 13-pin plug • LED interior lighting with LED strip • Reversing lights • Large-sized, full-LED safety lighting • Side LED reversing lights • LED work lights at the rear for better visibility when loading and unloading • Integrated rear fog light • Various marker lights at the front, side and rear • Aluminum alloy wheels in anthracite • Heavy-duty support wheel • 5-year chassis warranty • 4 wheel straps for securing over the wheel

Condition: used, Year of construction: 2021, CNC MACHINING CENTER Morbidelli N100 KEY FEATURES "BUMPERS": THE PERFECT COMBINATION OF SAFETY AND PRODUCTIVITY "PRO-SPACE" SAFETY DEVICES: SAFE AND COMPACT "HE" TABLE - FOCUS: EFFICIENCY AND SAVINGS AXES Morbidelli N100 12 Morbidelli N100 15 Morbidelli N100 18 Morbidelli N100 22 Working area in X-Y-Z axis * mm 2486-1255-150 3686 TECHNICAL DATA -1555-150 3686-1860-150 22-31 = 30862185-150 22-43 = 42862185-150 Travel X-Y-Z axes mm 3120-1685-250 4320-1985-250 4320-2285-250 22-31 = 37702585-250 22-43 = 49702585-250 Traverse speed of X-Y axes m/min 35 WORK TABLE Type Multifunction table made of aluminum Stops for "A" working area No. 4 Vacuum pump (Opt.) m³/h 250/300 DRILLING UNIT Vertical spindles No. – RPM 7 (4X-3Y) 8000 – 12 (8X-4Y) 8000 Horizontal spindles (Opt.) No. – RPM 4 (2X-2Y) 8000 – 6 (4X-2Y) 8000 Integrated saw blade in X (Opt.) Ø mm – RPM 125 – 10000 Motor power kW (HP) 2.2 (3) ELECTROSPINDLE Motor power Std. (S6) kW (HP) 6.6 (9) – 9.5 (13) Max. speed RPM 24000 Lateral tool changer 8 positions 10 positions 11 positions 13 positions INSTALLATION Installed power kVA 23÷28.5 Compressed air requirement l/min 400 Extraction air requirement m³/h 5300 Extraction air speed m/s 30 Extraction nozzle diameter (electrospindle + drilling unit + kit) mm 250 Machine weight kg 1950 2200 2500 22-31 = 2550 22-43 = 3200 * X Distance between stops - Y Max. panel width - Z Workpiece passage only electrospindle or electrospindle + drilling unit: diameter 200 mm; Extraction air requirement 3,400 m³/h In conjunction with the strip for panel ejection, the extraction nozzle diameter is always = 250 mm GENERAL FEATURES CNC machining center for processing panel materials. Self-supporting structure and work table Box construction made of cold-rolled steel, consisting of rectangular sections welded together; multifunctional work table made of aluminum with a single working area. Holes in a grid of 120 mm for vacuum connection, easily removable via a magnetic device (patented system). The entire surface is grooved at a distance of 20 mm so that the workpieces can be clamped using rubber seals, MODULSET or suction cups. Automatically retractable reference stops that ensure accurate positioning of the workpieces to be machined. Moving gantry It is a gantry structure made of cold-rolled steel in a box construction, consisting of rectangular sections. The working units are installed on the gantry. Working unit consisting of a drilling head with vertical spindles, horizontal spindles, an integrated grooving and sawing unit and an SCM electrospindle with a quick-change tool system of type HSK63F. Travel of the gantry and aggregate carrier The movement in the X, Y and Z axis takes place on linear prismatic recirculating ball guides by means of pre-tensioned ball screws. The movement transmission of the X and Y axes (moving column and carriage) takes place via a reduction gearbox with rack and pinion drive. The movement of the aggregate carrier in the Z direction takes place via pre-tensioned ball screws. Positioning of the working units and control of the machine functions takes place via "Brushless" three-phase servo motors and digital control units. CONTROL The control unit consists of a numerical control. Fpedpfx Aijz Iyvpjvon

Condition: used, Year of construction: 2023, Special price – Showroom machine Garbsen INDUSTRIAL AUTOMATIC EDGE BANDING MACHINE stefani md (the images of the machine are not binding with regard to the actual features specified below) KEY FEATURES EDGE BANDING OF SOLID WOOD UP TO 15 MM THICKNESS: SIMPLE AND FUNCTIONAL PROCESSING OF EDGES WITH LARGE DIMENSIONS "SGP" GLUE TANK: USE OF EVA AND POLYURETHANE GLUE FOR A PERFECT GLUE JOINT "STARTOUCH" CONTROL: A TOUCH IS ALL IT TAKES TO OPERATE THE MACHINE GENERAL FEATURES Automatic single-sided edge banding machine for applying edge banding with hot melt adhesive to the four sides of straight panels and for subsequent finishing. Machine frame and longitudinal supports made of cold-rolled steel in a box construction, manufactured in a single element, for high rigidity and vibration-free operation to accommodate the working units. Openings with slides for discharging any remaining chips to the floor. Upper pressure beam made of thick-walled steel construction and with columns made of cast iron, for a vibration-free structure where the working units are attached. Pressure rollers on the feed chain in a double row, made of rubber with a high coefficient of friction and with sliding on bearing rollers. Device to protect the pressure rollers from any remaining chips. Electronic adjustment of the upper pressure unit, depending on the panel thickness. Upper working units attached to the pressure beam or mechanically connected to ensure automatic adjustment when changing the panel thickness. Lower working units attached to the machine frame or to the longitudinal support, for a precise reference to the panel. All high-frequency motors are operated via frequency inverters. Protective cover for all units positioned after the gluing unit. Windows made of polycarbonate ensure a good view of the units during processing. Interior lighting of the cabinet. Protective cover with sound-absorbing material for lower noise emissions during processing. The spacer on the infeed guide allows the machine to be fed in the correct spacing. The spacing is automatically adjusted to the selected feed speed. Extraction nozzle arranged on the soundproof hood. Swivel control panel in an ergonomic position at the machine infeed. The electrical system complies with current regulations. Electrical components housed in a metal housing, attached to the machine frame and provided with doors for convenient access during any maintenance work. Panel feed The panel feed is carried out via a feed chain consisting of rubber sliding blocks with a high coefficient of friction, attached to a 1-1/4" industrial chain. The chain slides on 2 guides made of hardened and ground steel, a round guide and a flat guide, to guarantee a straight feed and protect against lateral displacement. Automatic lubrication of the chain. The amount of lubricating oil is optimized by the control system depending on the panels being processed. Support roller track externally and positioned along the entire length of the machine; consisting of an extendable opening system with sliding on linear bearings and plastic sliding rollers with steel pivot pins. "STARTOUCH" CONTROL Main features: 12" touchscreen color display Graphical representation of all processing units and their status (on/off) Fpsdpfxjzc Ilxs Aivjn

Condition: used, Year of construction: 2018, Delivery time approx. 5 months. Machine from educational use – TOP condition, low hours (edging unit unused). No tools included. Dismantling, delivery, assembly, commissioning, and training not included in the price. Includes Maestro 3D and Pro View. MORBIDELLI P200 Fpjdpfszvhlkox Aiven Working area X-Y: 3,110 x 1,620 mm, workpiece height Z180 mm Edge banding made for you: The CNC machining center is equipped with a comprehensive selection of edge banding tools to meet any woodworking requirement. MAIN ADVANTAGES · High performance with the advanced H80C edge banding unit, 8,000 rpm drilling spindles. The most robust spindle technology on the market, offering over 1,000 maintenance-free operating hours. · Better equipped: Suction cups can be disabled and configured via the FLEX worktable to optimally adapt the machine to requirements. · Easier, more intuitive programming thanks to the integrated CAD-CAM module for edge banding technologies “MAESTRO EDGE”. · Easier operation: The lowered frame ensures the worktable is always accessible. The control cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, no safety barriers are needed. Base structure: The base frame is a monolithic construction made from thick-walled steel, reinforced across the entire machine bed with welded square plates for exceptional rigidity. The bed’s shape, with a wide base, is the secret to lasting precision and stability. The load-bearing structure consists of a particularly robust, monolithic steel base, heavily ribbed and highly stiffened; the extra-wide support was specially designed to give the machine maximum stability, ensuring lasting precision regardless of operating conditions—with no need for floor anchoring. The base provides a large, solid support for the moving gantry: the working unit is thus equipped with a balanced, stable, and resilient support capable of handling the highest loads, ensuring top-quality performance and greater accuracy. The moving gantry is made from a robust single piece anchored to the base, sliding along top-quality prismatic guides with recirculating ball carriages. The working unit is attached and moves along the Y and Z axes on prismatic guides with recirculating ball carriages. Movement of the lower carriage (X-axis) and the working unit along the moving carriage (Y-axis) is enabled by rack-and-pinion transmission with helical teeth. This design results in greater tooth-on-tooth engagement, delivering higher acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures reduced wear on mechanical components and quieter operation. The vertical Z-axis is driven by a ball screw, ensuring perfect balance with dynamic loads and smooth acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage for maximum finishing quality.

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Fpsdpfxsxy Tmne Aivon

Condition: excellent (used), power: 74 kW (100.61 HP), gearing type: automatic, fuel type: diesel, color: white, axle configuration: 4x4, first registration: 10/2008, Year of construction: 2008, operating hours: 8,275 h, Equipment: all wheel drive, trailer coupling, General information Model year: 2008 Serial number: TW01100392 Technical information Number of cylinders: 4 Drive: Wheel Empty weight: 10.500 kg Functional Number of valves: 4 CE mark: yes Condition Technical condition: very good Visual appearance: very good Damages: none Financial information Price: On request Additional information Please contact Ernst van Hek for more information = Additional options and accessories = - 2 pedal control - 3rd valve - 4rd valve - Front window - Rotating beacon - Spotlight front - Spotlight rear = Remarks = Terex TW110 Mobile Excavator (2008) Hours: 8,278 hrs | Weight: 10,500 kg Engine: Deutz TCD 2012 L04 2V (74.9 kW / 100 HP) Tires: 50% remaining Buckets: Hydraulic cleaning bucket, 550mm and 750mm GP bucket Fjdpfx Aisz N R Nwjvspn Condition: German machine, from first owner, perfect condition!

Condition: used, functionality: fully functional, Layher Auxiliary Ledger 1.40 m Used – Extra Stability for Your Allround Scaffold Are you looking for a used Layher AR auxiliary ledger of 1.40 meters for your scaffolding project? This original Layher auxiliary ledger is an indispensable component of the Layher Allround system, ensuring maximum stability and safety when working at height. With a length of 1.40 meters, this is the ideal size to securely connect working decks and further reinforce your entire scaffolding structure. Key Features - Genuine Layher Allround system material, proven German quality - Length: 1.40 m, versatile for various scaffold configurations - Made of robust steel, designed for intensive use - Used version, fully technically inspected and ready for immediate use Fpjdpfx Aiewzxv Tjvsn - Perfect for construction, maintenance, and renovation Why choose this auxiliary ledger? - Provides optimal stability and safety for your Layher scaffold - A cost-effective alternative to new components - Large quantities available directly from stock - Worldwide delivery, wherever your project is located Delivery & Service These used Layher auxiliary ledgers are amply in stock and can be shipped promptly to customers worldwide. Collection from our warehouse is also possible. Want to order larger quantities or combine with other Layher parts such as brackets, ledgers, or standards? Feel free to request a competitive, tailor-made quotation.

Condition: new, functionality: fully functional, The Trimos V1 is ideal for anyone taking their first steps into the world of precision measurement technology. This compact height gauge greatly simplifies single-axis measurements and scribing tasks with impressive ease. For users who have previously worked with manual height scribers, the V1 offers the perfect transition to a modern precision instrument—without having to compromise on ease of use or robustness. Manufactured to the proven Swiss quality standard, the Trimos V1 stands for durability, reliability, and the highest accuracy. Its ergonomic design and intuitive operation make it ready for immediate use—ideal for workshops, inspection rooms, and training environments. Key Advantages at a Glance: - Ideal for beginners in precision height measurement - Easy handling and robust construction - Perfect alternative to traditional manual scribers - Swiss precision and longevity - Ready to use for reliable measurement results Model V1: V1 – 600 Fedpjxu Dd Tofx Aivopn Measuring range (mm): 611 Accuracy (mm): 0.030 Repeatability (mm): 0.010 Resolution (mm): 0.01 Autonomy (h): 2000 Max. Traverse speed (mm/s): 1500 Weight (kg): 8

Condition: new, Year of construction: 2024, functionality: fully functional, Baty R400 profile projector - flexibility and precision for larger workpieces The Baty R400 profile projector combines precise optical measurement technology with a generous 400 mm diameter screen, making it the ideal choice for inspecting larger workpieces. The horizontal light path and large measuring area of 300 mm x 150 mm provide the flexibility to efficiently measure both small and larger parts. Equipped with a choice of magnification lenses (10x, 20x, 50x and 100x), the R400 can be adapted to different measurement requirements. It is also available with multiple display options: Fjdpfx Ajuyh E Hsivjpn XLS: Basic 2-axis display for precise and simple measurements. MX200: This model extends the functions to include geometric measurements, including the calculation of angles, radii and distances. It also enables the creation of tolerance reports. FT2: This model offers advanced features such as edge detection and a fully integrated reporting and analysis tool with SPC support and automatic data acquisition. With its robust design and ability to perform both simple and complex inspection tasks, the Baty R400 is the perfect choice for manufacturing environments where reliability and precision are required

Condition: new, Year of construction: 2024, functionality: fully functional, Baty Venture Plus XT - High-precision multi-sensor measuring system for very large workpieces The Baty Venture Plus XT is a sophisticated multi-sensor measuring system specially developed for the inspection of very large and complex workpieces. It offers outstanding precision and flexibility for companies that need to perform demanding quality checks. The robust design, combined with state-of-the-art CNC control and Fusion 3D software, enables automated and repeatable measurements on a large scale. Available models: VP-80100-CNC-XT With a measuring range of 800 mm x 1000 mm x 460 mm, this model offers the perfect solution for large workpieces. The combination of optical and tactile measurements enables precise data acquisition. The model is ideal for applications where medium to large components need to be measured efficiently and accurately. VP-80160-CNC-XT This variant has an extended measuring range of 800 mm x 1600 mm x 460 mm, making it ideal for longer and more complex workpieces. With the integrated 6.5:1 zoom optics and programmable LED lighting, this model offers high flexibility for the precise inspection of workpieces of different sizes. VP-100120-CNC-XT This model has a measuring range of 1000 mm x 1200 mm x 750 mm and is perfect for very large workpieces. The sturdy aluminum construction and the air bearing axes ensure maximum accuracy, even with heavier workpieces. The fully automatic CNC control and the user-friendly Fusion 3D software make it quick and easy to create inspection programs. VP-100200-CNC-XT With an impressive measuring range of 1000 mm x 2000 mm x 750 mm, this is the largest variant of the Venture Plus XT available. This model is designed for the inspection of extremely large components and offers maximum precision and flexibility. Thanks to the Fusion 3D software, CAD import/export and DXF overlays can also be used with this variant to perform complex measurements. Common functions: Multi-sensor technology: Combination of non-contact optical measurements and tactile measurements for comprehensive data acquisition and maximum precision. Fodpfxjuyh Tks Aivepn CNC control: Enables the creation of fully automated programs for repeatable and time-saving inspections. Fusion 3D software: Supports CAD import/export, DXF overlays and the creation of detailed reports with statistical process control (SPC). Programmable LED illumination: Provides optimal illumination of the workpiece to improve edge detection and measurement accuracy. Zoom optics: 6.5:1 zoom optics, optionally expandable to 12:1, offers maximum flexibility for different measuring requirements. The Baty Venture Plus XT is the ideal solution for companies that require a flexible and precise inspection solution for large to very large workpieces. It offers the necessary precision and efficiency to meet even the most demanding production requirements

Condition: used, Year of construction: 1995, Hotmelt spine glue unit Fpsdpfxszatcws Aivon Wohlenberg Year: 1995 Suitable for connection with a Wohlenberg Master 6501 perfect binder

Condition: used, Year of construction: 2008, Overview This blowing machine was manufactured in 2009 by Italian manufacturer SIPA. The machine was part of a complete non‑returnable PET bottle filling line dedicated to juices production. It was used to produce small formats as 0.2 - 0.25 and 0.5 L PET bottles and operated at a nominal speed of 12,500 bottles per hour. The machine is described as being in perfect condition since it had been dedicated for a small private label production. The equipment becomes available as the seller has finished the production dedicated to fruit juices. Technical data - Capacity: 12.5000 bottles/hour - Year of manufacture: 2009 - Formats: 0.2 - 0.25 and 0.5 L Fpjdjzb Adtjpfx Aivsn - Application: Juices - Container material: PET - Neck finish: 38 mm - Air conveying system available Scope of supply - blow moulder Sipa SFR EVO 8 (2009) - preform feeding - preform container - preform tilting device - spare parts available - air conveying system available

Year of construction: 2019, condition: used, Year: 2019 Condition: Excellent (aș new) Nipping press with inline connection to DGR Binder KM41 Technical details: Pressure max. 25t - Flat-lying transport of the thread-sewn books into the press station - 2 times pressing at a standstill - Adjustable press force - Adjustable pressing time - Timed feed to the perfect binder Fpodpfsy Exbkjx Aiven - Swiveling feed belt - Individual operation of the thread sewing machine possible - Manual feeding possible

Condition: new, Year of construction: 2026, The Hebrock K 36 Top model with motorized adjustment – a new machine. This Hebrock bestseller offers unprecedented possibilities. Developed for the highest standards, the K 36 stands for absolute reliability and productivity in daily use. By enabling the machine to be equipped with a stepped cutter and a multi-radius trimming cutter, Hebrock sets new standards in the field of perfect edge finishing for various edge thicknesses. Max. edge thickness: 3 mm Max. workpiece thickness: 60 mm Ready for operation in 6 min. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 60 mm Min. workpiece length: approx. 140 mm Feed speed: approx. 15 m/min Ready for operation: approx. 6 min Max. power consumption: approx. 7.4 kW Electrical connection: 400 V – 3 phases – 50 Hz Work table height: approx. 900 mm Machine dimensions: approx. 5250 x 1230 x 1430 mm (L x W x H) Weight: 1750 kg Equipment: Hebrock K 36. - 15 m/min Edge banding machine K36 With PLC control (incl. 15'' touchscreen), hot melt adhesive application to the workpiece for edge material up to 3 mm; trimming cutter (incl. diamond tool) up to 3 mm cutting depth, maintenance-free, coated glue tank with interchangeable tank preparation including glue discharge device, high-frequency double-motor trim saw station (approx. 12000 rpm), high-frequency milling station (approx. 12000 rpm) with pneumatic milling adjustment and interchangeable cutter (combination design), corner rounding cutter, radius trimming cutter, flush trimming cutter (incl. pneumatic retraction device), cleaning station, robust chain drive, ball-bearing double roller pressure, unit sight window from the machine rear and operator side, signal lamp for workpiece sequence, pull-out workpiece support, feed speed approx. 15 m/min, edge banding up to 60 mm workpiece thickness 36/08/1 Quick-change preparation for corner cutter 36/08/2/1 additional interchangeable motor for corner cutter R=1 36/09/1 Multi-radius trimming cutter 36/24/1 Release agent spray device 36/24/2 Cleaning agent spray device Fpodpji Am Ukefx Aivjn 36/25 Edge protection spray 36/27 Nesting (1x milling station + 1 x radius trimming cutter) 36/30 Pneumatic 3-point adjustment 36/30/1 Multi-tool for high-frequency milling station (R2/R1/chamfer) 36/45 Axis package Motorized adjustment for panel, edge thickness, and trimming cutter depth adjustment Location: in stock, 54634 Bitburg Available upon agreement.

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: AN98A21604, temperature: 232 °C, I am offering for sale a Nordson hot melt adhesive system in good condition. The device has been checked for function and is fully functional. The technical data can be seen in the pictures. Fpsdpfx Aijrq D Avjven

Condition: new, Year of construction: 2025, Large surfacing tables made of cast iron The surfacing table adjustment is carried out via a precise parallelogram system, so that in every adjustment position the distance between the table tips and the cutter shaft remains the same. The large, stable surfacing fence made of anodized aluminum is easy to move and can be tilted from 0° to 45°. The angle of the fence can be read from the workstation. Comes standard with an auxiliary fence. Large four-knife cutter shaft, precision-mounted. Smooth operation thanks to the precision unit and the heavy cast-iron design. Powerful industrial motor. Maximum user safety with the simplest operation. Indicator for chip removal via a scale. Manual table adjustment. Motor protection switch. Equipment details: Includes a foldable auxiliary fence for narrow workpieces. Manual quick adjustment of chip removal with scale and chuck. The safety device: The safety device is foldable and has been designed so that the operator is not hindered and is simultaneously protected during operation. Models TERSA with Tersa planing cutter shaft system: No more adjusting and screwing. Planer knife change in seconds. Self-locking. Particularly quiet. Perfect planing result. Dimensions and weights: Length approx. 2750 mm Width/Depth approx. 1500 mm Weight approx. 680 kg Surfacing Total length of the tables 2720 mm Infeed table length 1498 mm Chip removal max. 8 mm Fence length 1200 mm Fence height 190 mm Swivel range of the surfacing fence 90 - 45 ° Connection for dust extraction Dust extraction nozzle diameter thickness 120 mm Drive power Main motor 7 kW Installation information Space requirement length 2750 mm Space requirement width/depth 1604 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Electrical data Connection voltage 400 V Phase(s) 3 phases Type of current AC Mains frequency 50 Hz Planing cutter shaft Type TERSA Fpjdpfjff Efcox Aivon Diameter 120 mm Number of planing knives 4 pcs Speed 5000 min¯¹ Planing width max. 520 mm Location: In stock at 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2025, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data Fedpfepq If Dsx Aivspn table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Huyjm0s Motor power: 5,5kW Fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T5406/3-a solid steel cutterhead Xplane with 3 spiral knife rows (26 cambered carbide knives per row; 2 counter knives), delivery includes full knife equipment as well as a T-wrench Torx T20; shaft speed 6,000 rpm included. The emission sound pressure level LpA during machining is reduced by 8 dB(A). Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1998, Overview  This vacuum filler was built in 1998 by Italian manufacturer GAI. In 2024 the machine was fully refurbished and is available immediately.   Technical Details    Effective Capacity: approx. 4,500-5,000 bottles/hour  Machine equipped for the following bottle formats: Bordeaux 75cl (diameter 78mm) - Burgundy 75 - 37.5cl - Magnums  Rinser with 20 clamps, inspected  Filler with 20 taps and vacuum system (new turbine) - taps inspected, new gaskets. New seating springs.  AROL Saturno Capper with 4 heads and vacuum - semi-new jaws in perfect condition - new vacuum pump and circuit  New wine inlet solenoid valve  Plug for feed pump  Machine newly refurbished (solenoid valve, jaws, vacuum turbine, gaskets, vacuum pump)  Electrical supply: 400 Volts / 50 Hz, 3 phases  Dimensions:  Long 380cm x Wide 140cm x High 250cm  Weight: 3500 kg    Fpodjuch Tmjpfx Aivon

Condition: new, Year of construction: 2024, Binks Raptor Lite Air Combi Spray System The Binks Raptor Lite on a tripod combines the NEW Binks stainless steel pump MX 4/32 with the NEW Binks AirCombi spray gun AA440C. This guarantees pulsation-free paint supply and perfect surface quality. The Raptor Lite is the affordable and robust complete solution for a wide range of craft and industrial applications. Typical application areas: - Furniture and wood industry - Aerospace - Off-road - Metalworking - Truck trailer and semi-trailer manufacturers - And many others.... Suitable for the following materials: - Wood stains, paints and varnishes - Primers, sealants and undercoats - Solvent-based and water-based paints - Polyurethane - And many others.... 32:1 AirCombi Spray Package - 5-year pump warranty - Patented magnetic switch for quick, pulsation-free stroke change - All material-carrying parts made of stainless steel - AirCombi spray gun with the latest atomization technology - Modular design for reduced maintenance and low downtime - Fixed, spring-loaded seals - Large sight glass for release agents - Manufactured according to ISO 9001, CE and ATEX certified Fpodpfebu Dzisx Aivsn Raptor Lite Pump Specifications: - MX4/32 - Gear ratio 32:1 - Material flow max. 4 l/min, - Operating pressure max. 256 bar