Used Oil Suction Device for sale (18,555)

Condition: used, centre height 160 mm chucking diameter 200 mm hollow 54 mm Crsdozcgb Sspfx Aaxjd

Condition: used, length 800 mm width 500 mm Csdotv Icujpfx Aaxsrd height 1000 mm weight of the machine ca. 1,1 t 2 units - Weight approx. 550 kg/each

Condition: used, Flame heating device, Roland Groß + Söhne GmbH Ring burner for heating, for weld preheating, casting preheating, etc. Type 1 x 1" Ionization Manufacturer No. ALMA, Year of manufacture 03/20 Connection voltage: 230 volts Pe gas max.: 500 mbar Pe air max.: 10 bar Vgas max.: 30 Nm3/h Vair max.: 300 Nm3/h Includes 10 different flame ring nozzles Crodedz Spwepfx Aaxod - Flame monitoring, Hans Henning - Ring nozzle, foldable design consisting of 2 halves, inner diameter 310 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 400 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 490 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 500 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 590 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 690 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 690 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 800 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 890 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 890 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 990 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, arc length 1500 mm, with hose quick-connect coupling and ignition system, diffuser in the center For heating pipes and containers. For heating steel to welding temperature. Ideal for repair welding and manufacturing of welded components made of fine-grain steels. Preheating for powder flame spraying or Sulzer Metco high-velocity flame spraying. Heating with gas for thermal spraying.

Condition: repair required (used), Year of construction: 2014, functionality: not functional, overall weight: 1,500 kg, for excavate Cedjxggc Nopfx Aaxsrd machine without flywheel drive motor and frequenzy regulator

Condition: used, Year of construction: 2008, functionality: fully functional, tank capacity: 35,568 l, usable tank capacity: 35,000 l, total length: 8,100 mm, total width: 2,800 mm, total height: 3,200 mm, inner diameter: 2,500 mm, outer diameter: 2,800 mm, Double-walled steel storage tank with two manholes and insulation, leak detection system. Crjdpfx Aaezfqcdsxed

Condition: used, Year of construction: 2011, air flow quantity . m³/h suction power . kPa Codpfszfwumjx Aaxord power capacity 2,2 kW Sweat extractionThe techn. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2011, functionality: fully functional, Equipment: type plate available, Conveyor system / Outfeed / Infeed Manufacturer: Budde Year of manufacture: 2011 Condition: Good (Used) Color: Blue - galvanized Overall length: approx. 2500 mm Short side (outfeed): approx. 780 mm Overall width incl. motor: approx. 1300 mm Belts: 18 pieces - approx. 40 mm wide Conveyor width: approx. 1000 mm Stock: 2 pieces Including SEW motor (1.1 KW) Price per piece Internal article number: 2026012705 Thanks to the excellent workmanship of the conveyor system, your material will be transported smoothly to its destination, even under high load. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods, we are your competent partner! We will gladly prepare an individual offer for you or advise you on design or assembly questions. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, pharmaceuticals, trades, or the electronics industry. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or complementary components such as picking shelves or containers. Cjdpfxjzfnb Ds Aaxjrd Features: Condition: fully functional, with signs of wear Ideal for fast material transport Professionally disassembled and packed Collection address: Industriestraße 5 (47918 Tönisvorst)

Condition: used, Year of construction: 1998, functionality: fully functional, cooling capacity: 3.3 kW (4.49 HP), input voltage: 400 V, input frequency: 50 Hz, Oil cooler - Flow oil cooler D20V D30V 2 flow oil coolers - coolant system for machine cooling - individual sale possible. Crodpfx Asg U H E Seaxod Two stand-alone flow oil coolers / circulation coolers for cooling oil / hydraulic oil from Wöhr Kältetechnik for cooling / temperature control of the coolant circuit or hydraulic system on machine tools, with integrated circulation pump and flow monitor. Control cabinet integrated in the housing with connection cable, LAE temperature controller MTR11 and potential-free alarm contact in case of malfunction. The integrated circulation pump is a gear pump. The cooling units are suitable for clean oil. Instructions for programming the temperature controller are available. Both coolers are in used condition. Cooling unit. Wöhr flow oil cooler, type D 20 V, Year of manufacture 1998, serial no. 98101582, cooling capacity 2 kW, refrigerant R 404 a, with integrated circulation pump, operating voltage 400V, 50Hz, LAE controller MTR11, with Walter Procon connection plug (cooler was installed on the hydraulics of a grinding machine), dimensions approx. 80 x 75 x 110 cm, total power consumption 1.7 kW. Flow oil cooler D 30 V Wöhr flow oil cooler, type D 30 V, year of manufacture 1998, serial no. 98101583, cooling capacity 3.3 kW, refrigerant R 404 a, with integrated circulation pump, operating voltage 400V, 50Hz, LAE controller MTR11, with CEE connection plug (cooler was installed on the grinding oil supply of a grinding machine), dimensions approx. 80 x 75 x 110 cm, total power consumption 2 kW. The oil coolers and oil cooling system are in used condition and well maintained. Price negotiable. Our asking price per unit is €1,950.00 net ex works, plus packaging costs. Subject to typographical errors and omissions in all technical data. We only sell to countries within the European Community.

Condition: good (used), Swiveling welding rotator, rotary tilting table, container rotator, welding rotator, welding rotator, welding fixture, welding rotator, welding rotator and tilting table, welding rotator, welding rotator and tilting table, rotary tilting tables, positioner -Manufacturer: PEMA, swiveling, hydraulically height-adjustable welding rotator -Type: 1500AHM -Load capacity: 15000 N -Control: with remote control -Base plate: Ø 850 mm -Speed: 0.02 - 1.6 rpm Right/Left rotation -Axles: 3 pieces -tiltable: hydraulically Cjdpfx Aaozbutasxord -Height adjustment: hydraulic -Transport dimensions: 850/1650/H970 mm -Weight: 820 kg

Condition: like new (used), functionality: fully functional, roll diameter: 50 mm, roll width: 600 mm, roll pitch: 67 mm, total width: 800 mm, total length: 12,740 mm, conveying length: 12,740 mm, construction width: 800 mm, Technical specifications: Conveyor width (FB) in mm: 600 Codezibrdepfx Aaxord Overall width (GB) in mm: 800 Conveyor length (FL) in mm: min: 5,130, max: 12,740 Support structure: with swivel castors Consisting of: 1x conveyor belt with head drive, including side guide 80 / L: 2,200 mm, FB: 600 mm 1x roller conveyor 24V, including side guide / L: 2,040 mm, FB: 600 mm, RT: 50 mm 1x light-duty roller conveyor / L: 8,500 mm, FB: 600 mm, RT: 67.5 mm

Condition: new, HEIDENHAIN Incremental encapsulated length measuring system LS 187 – ID 526971-09 New HEIDENHAIN length measuring system, unused. The original packaging was opened solely for the purpose of taking photographs. Manufacturer: HEIDENHAIN Type: LS 187 ID Number: 526971-09 Device type: Incremental encapsulated length measuring system Measuring length: 940 mm Accuracy class: ±5.0 µm Pitch period: 20 µm Output signal: 1 Vpp Reference mark: In the center of the measuring length Crsdpfozcgy Uox Aaxed Mounting type: Integrated mounting strip Supply voltage: 5 V ±5 % Electrical connection: Flange housing, 14-pin, separate adapter cable

Condition: good (used), Container rotating device, welding rotating device, roller stand, rotators, pipe straightening system, roller stand rotating device -Roller stand: Container rotator without drive, 2 pieces -Roller spacing: 220 mm Crodpfx Aszbrqpoaxjd -Rollers: Ø 185 x 117 mm -Load capacity: kg -Dimensions each: 1070/200/H240 mm -Submission/Price: complete -Transport dimensions: 1070/410/H240 mm -Weight: 265 kg

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood chips and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Can also be used for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip containers with clamping bracket and chip collection bag. The system is fully assembled upon delivery, allowing for quick deployment. Mobile. Filter description: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standard and tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with a warning light on the control panel. The fan is located downstream of the filter. Equipment details: With a new locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of supply: Metal fan impeller. Inspection opening for cleaning the bypass filter. Connection cable 5 m with CEE plug 5-pole and phase inverter. 2 swivel castors and 2 fixed castors with parking brake. Preparation for connection of machine detection for up to 8 machines and slide valve controls. Manual cleaning. Sound pressure attenuator available as an accessory. Model: RLA 125 M Article no.: 5131256 Technical data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal volume flow: 1095 m³/h Max. volume flow: Crsdocnw U Dopfx Aaxjd Vacuum at Vnenn: Filter area: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from the lower edge of the extraction port to the ground: 850 mm Weight: 194 kg Location: Arriving at warehouse 54634 Bitburg.

Year of construction: 2022, condition: new, Altendorf WA 6 Manual height adjustment, Double roller carriage, length 2000 mm, Scoring unit, Swiveling, Extension table, Angle/miter fence, Automatic brake, Lowerable below table height ----- Technical data ----- Swivel range: 0 - 45°, Cutting width at parallel fence: 1,000 mm, Max. cutting height: 87 mm, Max. saw blade diameter: 315 mm, Swivel range for miter fence: up to 49°, Speeds: 4,200 rpm, Main motor power: 5.5 hp / 4 kW, Scoring motor power: 0.5 hp / 0.37 kW, Work table height: 910 mm, Dust extraction port diameter: 1 x 100 / 50 mm each, Crodpfx Aaoihahmoxjd Weight: 450 kg Large dust extraction hood Location: Available in stock, 54634 Bitburg - immediately available - Location: Available in stock, 54634 Bitburg - ready for loading - - immediately available -

Condition: good (used), Year of construction: 2012, Lothar Starke Airless piston pump HP 4/32 Lothar Starke Airless unit including spray gun Tripod stand Ratio: 32 / 1 Package with filter Compressed air manometer Good condition Codoy A Tpqepfx Aaxord Location: in stock at 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Al-Ko Clean Air Dust Collector, Year of Manufacture: 2024 Exhibition model - Immediately available Exceptional special price Crjdjcdy I Repfx Aaxjd Technical data, Power Unit 250 P Intake nozzle: 250 mm Motor rated power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. volumetric flow rate: 4900 m³/h Rated volumetric flow rate: 3524 m³/h Negative pressure: 2451 Pa Filter area: 22.4 m² Chip collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: Available from warehouse 54634 Bitburg

Condition: new, Year of construction: 2025, Clean air dust extractor RLA 160 For wood dust and shavings, designed for commercial use Article number: 5131620 Brand: Holzkraft For wood shavings and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood shavings and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Also suitable for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip collection containers with clamping bracket and chip collection bag. System is fully assembled upon delivery, allowing for quick deployment. Mobile. Description of the filter: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standardly tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with warning light on the control panel. The fan is located downstream of the filter. Cjdpfjcnw T Ijx Aaxjrd Equipment details: With a novel locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of delivery: Metal fan impeller Inspection opening for cleaning the bypass filter Connection cable 5 m with CEE plug 5-pin and phase reverser 2 swivel casters and 2 fixed casters with parking brake Manual cleaning Model: RLA 160 Article No.: 5131620 Technical data: Intake port diameter: 160 mm Nominal air flow: 1448 m³/h Max. air flow: 2400 m³/h Negative pressure at Vnenn: 2247 Pa Filter area: 9.21 m² Filter material: Dust class M Residual dust content: H3 (< 0.1 mg/m³) Filter cleaning: Compressed air supply: Chip collection volume: 2 x 193 l Supply voltage: 400 V Supply frequency: 50 Hz Motor power: 2.2 kW Sound pressure level max.: 73 dB(A) Dimensions (length x width x height): 1681 x 830 x 1654 mm Weight: 254 kg Location: Available from stock in 54634 Bitburg.

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 250 P-BP Intake nozzle: 250 mm Rated motor power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum flow rate: 4,900 m³/h Nominal flow rate: 3,534 m³/h Negative pressure: 2,451 Pa Filter area: 22.4 m² Dimensions (L x W x H) in mm: 2,305 x 1,333 x 2,609 Briquetting capacity: 30 - 50 kg/h Location: Available at warehouse 54634 Bitburg Subject to prior sale. Crsdpfxscdr E As Aaxsd

Condition: as good as new (ex-display), Remark: This is a II. Wahl product, new product unused. II. Wahl means there may be dust deposits, minimal scratches or dirt or dirt may be present. The oil drip tray is used for the storage of non-spillable or opened containers such as paint cans, paint buckets, cleaning agents, etc. The oil drip tray can be optimally placed in a shelf rack. The scope of delivery includes: 01x oil drip tray, II. choice (new goods) Manufacturer: SSI Schäfer Type: OAW 4800 Cedpfsn Atm Djx Aaxord Material color: sendzimir galvanized Capacity: approx. 60 liters load capacity: 200,00 kg total width: approx. 1.020 mm Usable width: approx. 970 mm Total depth: approx. 790 mm Usable depth: approx. 784 mm Total height: approx. 125 mm Useful height: approx. 95 mm Material thickness: approx. 3.00 mm Weight | pc.: approx. 26,960 kg Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a dispatch of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: excellent (used), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Included in the scope of supply: 1x Push-through safety device, used Material color: hot-dip galvanized Overall length: approx. 2,700 mm U-profile: 50 x 50 mm Agraffen dimensions: 335 x 50 mm (H x W) 4x Hex bolt: M10 x 35 mm 4x Lock nut: M10 8x Washers: M10 Additional information: System: SSI Schäfer For type designation: PR350/400 Designed for double rows of shelving Suitable for clear width: approx. 2,700 mm General information about the item: This item is offered for collection only. Any further transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery. Our services at a glance: (Prices upon request) Crsdjh T Uwvopfx Aaxed Assembly, installation Our general assembly conditions apply Shelf inspection Shelf inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all shelving systems Delivery with our own fleet (without unloading)

Year of construction: 2018, condition: like new (used), PlateExakt 600 - Cliché mounting device/die-cutting cylinder  Age: 1992  Mounting device  cliché mounting device which is exclusively designed to, the cliché or the die-cutting plate onto the impression or die-cutting cylinder safely, precisely and quickly cylinder. The device has two high-resolution USB cameras that can be moved linearly on a precision guide. precision guide. Synchronised via the centre and individually adjustable by means of a handwheel for different printing widths.  Max. diam.: 227”  Min. diam.: 60”  Width: 620mm Cedpfx Aol Ax Uwjaxsrd

Condition: good (used), Container turning device, boiler turning device, welding turning device, welding turning device, welding turntable, welding turning device Crodpfxev Uwlne Aaxsd -Container turning device: Welding turning device on rail chassis -Drive motor: 0.55 kW / adjustment motor 0.085 kW -Load capacity: 5000 kg -Roller spacing: 270 - 870 mm, rollers Ø 230 x 150 mm total width -Unwinding speed: 0.025 to 1.0 m/min Right/left rotation, Left rotation only continuous operation -Control unit: with hand control and foot pedal -Rail width: internal dimension 940 mm -Individual components: see photos -Transport dimensions: 1020/1020/H635 mm / 1020/500/H635 mm / 600/480/H955 mm -Total weight: 844 kg

Year of construction: 2008, condition: defective spare-parts repository (used), functionality: unexamined, power: 5 kW (6.80 HP), number of previous owners: 1, noise level: 69 dB, machine/vehicle number: 070523, Current operating hours of the tube: unknown Maximum PCB width: 450 mm x 400 mm Inline X-ray imaging + AOI History from the previous owner is available Crodpfx Aaezhwvpsxjd We acquired the machine as "functional," but it was likely used as a source of spare parts by the previous owner. Therefore, it cannot be guaranteed that all components are present. We have never put the machine into operation and cannot provide any information about its condition during operation. You are welcome to inspect the machine in 72108 Rottenburg and form your own opinion. Since we are selling the machine as defective/in need of repair, the goods are sold with the exclusion of any warranty and any liability for defects.

Condition: used, functionality: fully functional, Used lifting device for raising and lowering manhole covers, fully functional. Codpfx Aaszg Ub Hsxerd

Condition: ready for operation (used), Year of construction: 2019, A mobile Höcker dust extraction and filtration unit is available. Inlet diameter: 140mm/160mm, max. airflow: 1950m³/h, max. vacuum: 2600Pa, filter category: H3, machine dimensions X/Y/Z: approx. 1450mm/1050mm/2000mm, weight: approx. 350kg. Documentation available. An on-site inspection is possible. Crodpfxezhnq Re Aaxed