Used Mt700K Compactor for sale (465)

Condition: new, machine/vehicle number: ZBP 30, The AMIS briquetting press type ZBP 30 produces 30 mm briquettes. These briquettes are ideal for combustion in wood gasifiers and smaller wood chip boilers or heating systems. Any material from a woodworking operation (shavings, dust, etc.) can be briquetted. Wood chips, sawdust, wood shavings, etc., are generated in all craft and industrial woodworking companies. These materials incur significant storage and transport costs on a daily basis. Briquetting presses offer an ideal solution by compressing the material into briquettes, which are simple and space-saving to store and transport. Furthermore, the risk of spontaneous combustion is significantly reduced. Klodpfxeyr I Hns Adyet The briquetting presses require little space, feature sturdy construction, and are equipped with low-maintenance technology. Whether it is wood, paper, biomass, foam, or polystyrene, the ZBP can briquette all suitable materials. With a throughput of up to 35 – 130 kg/h, they are especially suited for small and medium-sized enterprises.

Condition: used, Year of construction: 2012, operating hours: 11,850 h, pressing force: 88 t, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, overall weight: 23,000 kg, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), For sale used baler + used conveyor brand: HSM VK 88 + Stadler KF1800 Baler is VK 88 R – FU, Frequency drives, 2 x 45 kw. * Unblocking cylinder option * Ball joint fixing main ram cylinder * Stadler conveyor 1600 mm internal Year 2012 11850 hours Rod main cylinder and seals kit new. To be replaced : 2 front chamber floor section : middle and front to the channel Greasing / changing: Few sides diabolos are used and running, some rusty, some in good condition. Baler is running good and bales tying is ok Ram wheels OK Ram side wheels OK Rod main cylinder : almost new Main cylinder seals kit : almost new Ram sides nylon strips : 80 – 90 % good. Finetune the geometry adding spacers ( customer has parts on stock) Knife/ counter knife : good, 70% Kjdpfx Adeyuyg Seyolt Needles wheels : ok but change is preferred + the closing plates Main frequency drive 1 of 2 : in total 2 x 45 kW : one is out of order. I don’t know if it will be changed or not. Baler is running on one pump. Side walls chamber : Side walls are worn out where the nylon guiding plate are sliding : few millimeters up to 2 mm average. Conveyor : Chain rollers are used with a bit of play. Greasing is missing but still good condition. Guiding strips are ok Feeding cleats are worn out, almost all. Start/stop with frequency drive. Side walls ok on incline part and in pit. Wire coils platform : Not included.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, pressing force: 70 t, Equipment: documentation/manual, HSM HL 7009 Re / Li horizontal baler. The machine is in very good condition and regularly serviced by an authorized service center. This baler is designed for larger waste disposal projects in retail outlets and small and medium-sized central warehouses. Bales from the HL 7009 model have a cross-section of 1100 x 1100 mm and, with a bale length of 1200 mm, can weigh up to 600 kg, ensuring optimal utilization of the truck's payload. Pressing force: 700 kN Specific pressing force: 58 N/cm² Drive power: 10.5 kW Voltage / frequency: 400 V / 50 Hz Kedpsy Tt Rijfx Adyslt Idle capacity (theor.): 42.97 m³/h Loading opening width x length: 890 x 1020 mm Bale width x height x length: 1100 x 1100 x 1200 mm Total length x width x height: 5366 x 2525 x 2559 mm Bale weight: 600 kg

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 60 t, bale weight: 550 kg, Used HSM V-Press 1160 Plus vertical press from 2015. The device is regularly serviced by an authorized service center. The press is fully functional and in very good technical and technical condition. Crushing force: 594 kN Voltage / required: 400 V / 50 Hz Width x height of the loading opening: 1195 x 650 mm Bale length x width x height: 1200 x 1100 x 1200 mm Width x height x height of the machine: 1780 x 1568 x 2985 mm Machine weight: 2403 kg Pressed material: foil, mixed paper, cardboard, cutting machine waste Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Kledpoy Sxagsfx Adyot Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-community invoices - excluding VAT. Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 00128-0010-01, total width: 2,000 mm, This used Bollegraaf chain conveyor is being sold by Bollegraaf Recycling Solutions and is offered in combination with an extra-strong pre-press for large cardboard boxes and octabins. Klsdpfoyu Stkjx Adyjt The chain conveyor is of the type Bollegraaf HBT 2250/2000. The corresponding extra-strong pre-press for large cardboard boxes and octabins is also equipped with a so-called wirbulator. Technical specifications chain belt conveyor: Manufacturer: Bollegraaf Type: HBT 2250/2000 Year of construction: 2008 Drive power: 7.5 kW Length of feed belt: 8,300 mm Length of inclined belt: 19,250 mm Length of swan neck: 2,400 mm Inclination angle: 30° Effective width: 1,960 mm Feed belt sidewall height: 500 mm Inclined belt sidewall height: 800 mm Weight: 16 t

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: Machinenummer 230067.020, pressing force: 60 t, power: 45 kW (61.18 HP), operating pressure: 250 bar, Bollegraaf Recycling Solutions, the original manufacturer of this mobile Bollegraaf baler, hereby offers the following machine(s) FOR RENT ONLY: Year of construction: 2022 Weight excl trailer: 22.000 kg Mobile Baler Volume capacity m3/hr max. 365 334 321 301 Volume weight kg/m3 max. 15 30 50 80 Klodpfx Adjh I T Iboyot Weight capacity T/hr max. 5.5 10 16 24 Bale weight 400 – 800 kg, depending on S.G. of material and bale length Bale length - adjustable Bale height - 720 mm Bale width - 1100 m Filling opening - 1100 mm x 1320 mm Max. size supply - 1500 mm x 1200 mm Pressure force ram - max 60 tonf. Pressure force pre-press flap - max 25 tonnes Cycle time - 18 seconds Motor - 45 kW Motor Twistomat - 2.2 kW Motor counter pressure pump - 1.1 kW

Condition: ready for operation (used), Year of construction: 1999, operating hours: 15,547 h, functionality: fully functional, machine/vehicle number: W99-031.010, pressing force: 60 t, pressure: 250 bar, power: 30 kW (40.79 HP), year of last overhaul: 2024, Equipment: documentation/manual, This used baler is being sold by Bollegraaf Recycling Solutions. This is an HBC60 (30kW) baler with vertical binding. This baler can be viewed in our overhaul workshop. This baler has only 15,547 hours. Technical condition is very good! (the baler has only baled paper) This baler comes with the following options: * intermediate hopper + distributor * belt feed chute * bale discharge, * wire roller platforms Ksdpoyux Nxofx Adyjlt

Condition: good (used), Year of construction: 2001, functionality: fully functional, KAMPWERTH SHD 1600 horizontal baler, incl. 3 interchangeable containers Klodpfexm Skrox Adyot 48000x2800x3000 Paper baler // Waste baler // Refuse baler Baler, 1 unit • Type: Kampwerth SHD 1600 • Year of manufacture: 2001 • Unladen weight: 3,500 kg • 15 kW • Dimensions: 5000x2300x3700 mm (disassembled for transport) Container box for baler, 3 units • Year of manufacture: 2001 • Volume: 28 m³ • Unladen weight: 3,100 kg • Filling weight: 12,000 kg • Dimensions: 7000x2400 mm Location: Bielefeld

Year of construction: 2018, condition: excellent (used), From 2018, 15 kW, with hopper and container PM 32-E (32 m3) and tipping device Klodpfeyti Ipex Adyot

Condition: excellent (used), Year of construction: 2016, bale weight: 480 kg, For sale: HSM HL 4809I baling press. Kjdpfx Aey T Iqdodyelt

Condition: used, Year of construction: 2021, functionality: fully functional, For sale: HSM 7009st baler and conveyor belt. Kledpfx Adjy T Inpsyst

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, For sale here is an ANIS ATS 110-75S-9CT-30kW baler, including cross-tying system (9-fold binding). The baler is in good technical condition and was only used sporadically. DIMENSIONS OF THE BALER - Total length: 9700 mm - Total width: 3700 mm - Transport width: 2300 mm - Height incl. chute: 3640 mm - Approx. total weight: 24 t - Ground pressure approx. 5 kg/sqcm - Heaviest part of the machine: approx. 6 tons CHUTE OPENING - Length: 1600 mm - Width: 1200 mm - Inspection door (glass) PRESSING CHAMBER - Piston stroke length: 2600 mm - WxH: 1100 x 770 mm - Volume: 2.2 cbm - The piston runs on solid rollers and is fitted with knives for cutting residual material. - The pressure on the pressing chamber (channel) is applied by two side cylinders and a simple lever system, allowing for consistent and even force distribution. HYDRAULIC EQUIPMENT - Siemens electric motor, 4-pole, 400V-50Hz, 30 kW - Hydraulic pump (Bucher) const./peak 320/400 bar - Max. working pressure 290 bar - Denison hydraulic valves 24 VDC - Pressure monitoring with proportional valve cycle - Automatic oil temperature monitoring - Automatic oil filter monitoring - Automatic oil level monitoring - Oil volume: 600L - Max. press force: 740 kN / 74 t - Specific pressure: 87 N/sqcm PLANT THROUGHPUT Kjdpfx Asy Ayiqodyjlt - Volume per press operation including pre-compression: 1.76 cbm - Average cycle time per press operation approx. 40+8 sec. - Cycle time without material 22+8 sec. - Binding time 30 sec. - Theoretical volume without binding 1.84 m3/h - Average working volume 123 m3/h - Capacity at material density 30 kg/m3: 3-4 t/h BALES - Bale length: 500 - 2000 mm - Bale width: 1100 mm - Bale height: 770 mm

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, pressing force: 50 t, bale length: 1,200 mm, bale weight: 500 kg, Equipment: safety light barrier, For sale: HSM 3521s machine, manufactured between 2015 and 2023. Kodpfx Aey T Empjdyjlt

Year of construction: 2026, condition: used, General information New: Yes Colour: Grey/black Reference number: 5 Weights Empty weight: 220 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Production country: KR Additional information Please contact Ö. Inalkac for more information We offer you AJCE ACP5N excavator mounted Vibration plate Compactor. ACP5N (220kg) fits on 3~6ton excavator. Available from Netherlands warehouse! Contact us. Kjdpfx Aoyya Hkodyelt Verdichter, Compacteur, Puristin, Kompaktor, compactador, Zagęszczarka, Þjöppur, Komprimator, Цомпацтор, Συμπιεστής, Compattatore

Condition: excellent (used), Year of construction: 2011, operating hours: 1,950 h, functionality: fully functional, pressing force: 48 t, bale length: 1,200 mm, bale width: 750 mm, bale height: 1,100 mm, bale weight: 550 kg, Equipment: documentation/manual, Automatic baler HSM VK 4812 The machine is maintained in perfect condition. The total operating hours are only 1950, and it has processed just 1314 bales of material. The machine was regularly serviced and has operated indoors in a warehouse since new. The baler has worked almost exclusively with non-abrasive material – textile offcuts. Key advantages of the unit: - Actual throughput: 6–13 t/h - Optimal continuous operation: 6–10 t/h - Very fast cycle time → ideal for use with conveyor lines - Significantly superior to the 15–22 kW version when processing a high material stream Technical data: Pressing force: 480 kN (≈ 48 tons) Motor power: 30 kW Connected load: approx. 32 kW Klsdjy Sm Sqjpfx Adyjt Power supply: 3 × 400 V / 50 Hz Specific pressing force: 58.2 N/cm² Volumetric throughput: up to 332 m³/h Practical weight throughput: approx. 6 t/h (20 kg/m³) approx. 13 t/h (50 kg/m³) Theoretical (maximum) throughput: up to 16.6 t/h at 50 kg/m³ Idle cycle time: approx. 11.2 s Bale dimensions: 1100 × 750 × 600–1200 mm Bale weight: up to approx. 550 kg Pressing channel: 1100 × 750 mm Filling opening: approx. 1020 × 1250 mm We also have other balers in stock. Transport costs depend on weight, volume, and most importantly, distance. When making inquiries, please provide the following details: Delivery address (postal code and town/city name). For further details and transport options please contact us by phone, as additional arrangements require direct contact. Our contact details are available in the seller's legal information. We sell and export worldwide; thanks to our extensive warehouse capacity, we can flexibly and quickly supply larger quantities as well. We issue intra-community invoices – VAT-free. Opening hours: Mon–Fri: 08:00–16:00 Sat: closed

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 60 t, input voltage: 400 V, bale weight: 550 kg, overall weight: 2,450 kg, Used HSM V-Press 1160 Plus vertical press from 2015. The device is regularly serviced by an authorized service center. The press is fully functional and in very good technical and technical condition. Crushing force: 594 kN Voltage / required: 400 V / 50 Hz Width x height of the loading opening: 1195 x 650 mm Bale length x width x height: 1200 x 1100 x 1200 mm Width x height x height of the machine: 1780 x 1568 x 2985 mm Machine weight: 2403 kg Pressed material: foil, mixed paper, cardboard, cutting machine waste Ksdpfxey Sm H Ie Adyjlt Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-community invoices - excluding VAT. Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: used, Bramidan 4-X25 – High-performance baler for waste compaction Suitable for various materials, including stretchable types Large, wide chamber Kjdpfxov Ak Dgo Adyjlt Safety locks prevent material expansion inside the chamber Short cycle time allows fast waste processing TYPES OF WASTE: Cardboard Plastic film Paper PET bottles Aluminum cans Rigid plastics Textiles EPS Styrofoam Steel cans BALE DIMENSIONS 1200 x 800 x 800 mm PRESSING FORCE 25 t BALE WEIGHT Cardboard (kg): 200-300 Plastic film (kg): 250-350 Price 4500 EUR

Condition: reconditioned (used), Year of construction: 1999, functionality: fully functional, type of input current: three-phase, power: 160 kW (217.54 HP), input voltage: 380 V, warranty duration: 12 months, year of last overhaul: 2023, Equipment: documentation/manual, 1 pellet press make: Buhler DPAB inner diameter die 660 mm tread die 138 mm Press is equipped with 1 motor 160 KW . Press door is made of Stainless steel with overload valve in door. 2 Roll press with 2 rolls on the press overhauled in dimple or racked version Press is complete with die lifting device and tools The press is completely overhauled and equipped with new bearings and wear parts such as front and rear sliders die washer etc. Also new V-belts Also, all safety devices will be observed and appropriate switches on Friction protection , door switch and inspection hatches will be fitted. Kljdpfx Asrah Evedyet

Condition: ready for operation (used), Strautmann PP 1207 Pressure force 58 tons Kodpsra Aq Djfx Adyelt Baler weight from 400-500 kg depending on material 4KW engine Baler format (LxWxH): 1200 x 700 x 800 mm Feed opening: 1145 x 430 mm External dimensions (LxWxH): 1844 x 1067 x 2868 mm Feed opening: 1145 x 430 mm Transport height: 2500 mm baler weight approx. 2300 kg

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, pressing force: 90 t, bale weight: 700 kg, type of input current: three-phase, total width: 220 mm, total height: 240 mm, overall weight: 23,000 kg, total length: 1,142 mm, filling opening width: 90 mm, filling opening length: 140 mm, bale width: 80 mm, bale length: 1,200 mm, bale height: 110 mm, tank capacity: 1,100 l, year of last overhaul: 2025, Equipment: documentation/manual, Paal Licon 250 SC Channel Baler Kledpexdnn Ijfx Adyjt Originally built for baling non-ferrous scrap, for the last 12 years this machine has been used at a packaging plant. It processed 700–800 tonnes of cardboard per month. Machine specifications: - Length: 11.42 m - Width: 2.20 m - Pressing force: 80 t - Bale/channel dimensions: 110 x 80 cm - Feed opening: 140 x 90 cm - Machine weight: 23 t - Dual high-efficiency cooling system designed for continuous 24-hour operation in a warm workshop environment The machine floor has been overhauled; the main ram/cylinder is just six months old. The knives for trimming excess material have been replaced and upgraded for faster and more efficient operation. In 2025, the hydraulic oil was changed, distribution valves serviced, and all rollers of the main plunger/plate replaced. The pressing ram has also been refurbished. Comes with plenty of spare parts. Equipped with upgraded electronics and control panel from 2018, fully operational and ready for immediate use. Operation via touchscreen display. Comprehensive photographic documentation from the dismantling process is available. Complete technical documentation (DTR) in Polish and electrical schematics included. Testing of the machine is possible on-site. Additionally available: - Roller bale discharge system with conveyors, tipper, weighing system, and bale storage (as shown in the photos), Or optionally: - Tipping elevator for emptying 1100 L or 660 L bins - PAAL KES1750 chain channel conveyor: width 1750 mm, horizontal section 8 m, inclined section 8 m.

Condition: reconditioned (used), Year of construction: 1987, functionality: fully functional, pressing force: 10 t, filling opening width: 580 mm, filling opening length: 900 mm, bale length: 800 mm, bale width: 500 mm, bale height: 600 mm, bale weight: 100 kg, total width: 1,000 mm, total height: 1,540 mm, total length: 4,700 mm, overall weight: 1,200 kg, power: 6.8 kW (9.25 HP), transport length: 4,700 mm, Equipment: documentation/manual, safety light barrier, The machine has been overhauled by us and was completely disassembled. Main cylinder resealed. New hydraulic hoses. New hydraulic oil. Sub-oil motor. Kljdpfjy D Dr Sox Adyot Plexiglass panels replaced. Guide rollers on the press plate readjusted. Triple horizontal manual tying. Tying with wire. Bale length adjustable: 400, 600, 800, 1000 mm. Operating manual with electrical and hydraulic diagrams available.

Condition: ready for operation (used), DIXI 60SLD is a semi-automatic baling system with a pressing force of 60 tons, designed for economical volume reduction of recyclable residues in industrial and craft sectors: - Cardboard boxes - Foams - PET bottles - Insulation mats - and other pressable materials Horizontal baler, DIXI 60 SLD waste press with tipping device Technical specifications: Pressing force: 60 tons Specific pressure: 6.81 kg/cm² Power supply: 400V / 7.5kW Bale dimensions: 800 x 1100 x 1200 mm Number of ties: 3 Bale weight: approx. 370–410 kg Tying: manual Feed opening: 990 x 1110 mm Machine weight: 5,420 kg Average pressing cycle: 47 sec Year of manufacture: 2011–2016 Dixi 80SLD Baler Technical Data of the Baler Brand: Dixi Model: 80 SLD Kedpfxera A E Uo Adyjlt Pressing force: 80 tons Drive power: 11 kW, 400 V / 32 A Feed opening (W x H): 1040 x 1110 mm Pressing cycle: approx. 35 sec Throughput: approx. 1,000 kg/h Bale size (W x H x L): 1120 x 1120 x 1200 mm Bale weight: depending on material, approx. 500–600 kg Bale tying: triple, manual Machine dimensions: Length: 4,200 mm (+cage 1,600 mm) Width: 1,830 mm Height: 2,620 mm Machine weight: approx. 8,000 kg Automatic bale ejection Robust construction for long-term use Year of manufacture: 2016–2020 Weight: approx. 8.4 tons Condition: Used

Condition: used, functionality: fully functional, Year of construction: 2023, WEBER Drive Unit MVX — Year of manufacture 2023 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Kedpfjy A Hduox Adyelt Price EUR 750 plus VAT | EXW Einbeck | Delivery upon request

Condition: used, functionality: fully functional, Year of construction: 2025, Weber Internal Vibrator IVUR 50 — Year of manufacture 2025 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Klodpfx Adsy A Hcqsyjt Price EUR 950 plus VAT | EXW Einbeck | Delivery upon request

Condition: used, functionality: fully functional, Year of construction: 2022, Mikasa Tamping Rammer MTX-60E — Year of manufacture 2022 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Kjdpfey A Hcdsx Adyelt Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Price EUR 1,100 plus VAT | EXW Einbeck | Delivery upon request