Used Metal Technics Polska Hydraulic C-Frame Press for sale (103,143)

Condition: used, Year of construction: 1993, Press area: 3000mm x 1900mm Bodpfxoy A Hkze Akasdb Press depth: Press elements vertical: 3 Press elements horizontal: 2 Pressure system: electrohydraulic Press pressure: per cylinder Cylinder stroke: mm Hold-down device: no Machine length: 3500mm Machine width: 1000mm Machine height: 2600mm Weight: approx. 900kg

Condition: good (used), machine/vehicle number: 042-020/101, Single-column press with drawing cushion, good condition, immediately available Bdedpfx Akjy Hq Ifeaob

Condition: repair required (used), machine/vehicle number: 084-024/1, Single-column press WMW Zeulenroda, has not been used, therefore must be inspected. Bdsdpfoy Hq Hhjx Akasb

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 Equipment and technical data: Electrohydraulic drive Vertical press cylinders: 3 units Stroke of vertical cylinders: approx. 130 mm Vertical cylinders adjustable via perforated grid Horizontal press cylinders: 2 units Stroke of horizontal cylinders: approx. 130 mm Horizontal pressing force: approx. 2,000 kp Central pressure beam: 1 unit Control: manual via hand lever Pressing area: 3,000 × 2,100 mm (L × H) Dimensions: 3,500 × 800 × 2,100 mm Weight: approx. 1,500 kg The above information is provided subject to change until the machine arrives at our warehouse. Bdodpfsyx Nubex Akajb Availability: short-term Location: 63934 Röllbach

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, AXA ELECTRO-HYDRAULIC PRESS WITH TRAVERSING CYLINDER Capacity: 150 tons. Automatic dual-speed operation with fast mode. Special electrical panel with quick/slow changeover switch for one-handed operation. Traversing cylinder stroke: 816 mm. Internal clearance (side to side): 1,500 mm. Ram stroke: 300 mm. No. 01 AXA PM150/15 ELECTRO-HYDRAULIC PRESS WITH MOVABLE PISTON – NEW ITEM, CE MARKED. — AUTOMATIC DUAL-SPEED OPERATION WITH FAST MODE. — COMPLETE WITH SPECIAL ELECTRICAL PANEL WITH QUICK/SLOW SWITCH FOR ONE-HANDED OPERATION. — TECHNICAL DATA SHEET ATTACHED. - Rated force: 150 tons Bdodpfx Akolruhdsasb - Cylinder stroke: 300 mm - Internal clearance: 1,504 mm - Approach speed (fast): 1,450 mm/min - Working speed (slow): 105 mm/min - Ram stroke: 300 mm - Ram diameter: 110 mm - Stem diameter: M30 - Tank capacity: 50 liters - Max pressure: 350 bar - Voltage: 400 V, Frequency: 50–60 Hz - Motor power: 3 kW - Max current draw: 7.3 A - Weight: 1,500 kg Equipped with GALTECH distributors: • 2MP block. • No. 2 VIVOIL external gear unidirectional pumps: one for rapid approach and return (set at 20 bar), and one with adjustable pressure via handwheel to set desired force. • Maximum pressure valve with mechanical lock to prevent overpressure. • Standard gauge to display delivered force. • INTECH electrical panel, certified according to current standards and supplied with independent CE marking.

Condition: used, Year of construction: 1984, functionality: unexamined, Single-column press 250 t has not been used. Sold on behalf of customer. Inspection possible by appointment. Bdedjy Hgk Aopfx Akaob

Condition: new, Heavy duty splicing press for producing long lengths of timber Simple to use Top and bottom plates press simultaneously Very quick cycle time 35 tonne capacity hydraulic pack Bjdpfjpahmhjx Akaodb 7.5Kw motor Pneumatically operated head Maximum timber section 75 x 300mm Two hand control unit Manual eccentric side clamping Optional 2m infeed and outfeed tables

Condition: as good as new (ex-display), Year of construction: 2024, pressure 100 t stroke 300 mm table surface area 1070 x 260 mm column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1500 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Display machine from 2024 With only approximately 2 operating hours Like new condition Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands Bedoxabcwspfx Akaedb - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: as good as new (ex-display), Year of construction: 2025, pressure 150 t stroke 300 mm table surface area 1070 x 290 mm column travel between the guideways 1070 mm ajustment speed 9.0 mm/sec working feed 5.0 mm/sec Bdodexaabfjpfx Akaob return speed 10.0 mm/sec engine output 11.0 kW weight of the machine ca. 1870 kg. range L-W-H 2200 x 1300 x 2300 mm Exhibition machine from 2025 with only approximately 2 operating hours Condition as new Special price upon request Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in . and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Hydraulic tank permanently mounted on the side - Operating instructions

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, table width: 900 mm, total length: 3,000 mm, 100 ton press with pressing area 900 x 3000 mm, equipped with REXROTH HYAG31/2000 hydraulic press unit. Year of manufacture: 2001. The press was completely overhauled in 2025 and fitted with BUSSE heating plates up to 120 degrees Celsius and a SIEMENS-RITTAL touchscreen control panel. After basic disassembly, the press has a weight of approx. 40 tons. Includes roller conveyor and lift table. Bdedpfxsyxp Unj Akaeb

Condition: good (used), Year of construction: 1998, machine/vehicle number: 119878, Offer 26098 Technical Data: - Saw blade diameter up to 400 mm - Cutting capacity at 90°: • Round: 130 mm • Square: 120 mm • Flat: 305 x 40 mm or 240 x 85 mm - Miter adjustable left & right: 0° – 90° - At 45°: Bjdpsy At D Isfx Akaedb • Round: 130 mm • Flat: 245 x 30 mm or 180 x 70 mm - Infinitely variable saw blade feed rate: 0 – 10 m/min - Saw blade cutting speed: 13 / 26 m/min - Saw drive: 400 V / 1.7 / 2.6 kW - Hydraulic drive: 400 V / 0.75 kW - Hydraulic material vice, steplessly adjustable clamping pressure - Handwheel for fine adjustment - Adjustable material stop - Coolant system - Discharge roller conveyor with length stop: 5000 mm - Infeed roller conveyor: 4000 mm - Space requirement: approx. W 800 x H 1770 x D 1020 mm - Weight: approx. 950 kg

Condition: good (used), Year of construction: 2012, functionality: fully functional, pressing force: 150 t, overall weight: 1,400 kg, Equipment: CE marking, We are offering this quality Sahinler 1020-150 workshop press, hydraulic press, 150 tons, year of manufacture 2012. - Adjustment of closing stroke with fine tuning - Table height adjustable - Automatic pressure cut-off at set pressure Bdodpeyzl Amofx Akasb - Separate 2-hand control panel - Table plate with T-slots for T-nuts - Ram plate with slots - 2 machine guide columns for the upper ram plate Fully functional The machine can be demonstrated on site Hardly used, only for prototype production Single owner Dimensions as per data sheet Loading on site possible. Weight approx. 1.4 t Original price approx. €21,000 net No warranty or guarantee If you have any questions or require more information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 1990, Bending length: 14,000 mm Column width: 10,500 mm Control: CYBELECCNC 7000 with graphic Bdjdpfoy Emwmjx Akaeb Table width: 1,000 mm Distance between table and press beam: 1,800 mm Controlled axes: Y1; Y2; X1; X2 Control system was renewed in 2012 Total power requirement: 75 kW Machine weight approx. min.: 465 t Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information - Distance between table and press beam: 1,800 mm

Condition: good (used), Year of construction: 1975, table width: 750 mm, table length: 1,000 mm, throat depth: 400 mm, ram plate width: 500 mm, ram plate length: 630 mm, Pressure: 250 t Throat: 400 mm Stroke: 30...140 mm Bdodoy Emv Aepfx Akasb Table size: 1000 x 750 mm Passage opening in table: 360 x 400 mm Ram area: 630 x 500 mm Ram adjustment: 110 mm Total power requirement: 18 kW Machine weight approx.: 16 t

Condition: good (used), Year of construction: 1994, Pressure: 250 t Throat depth: 360 mm Bdsdpfx Akoy Emvpoaob Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Machine weight approx.: 8 t

Condition: used, functionality: fully functional, pressing force: 150 t, pressure: 250 bar, Double-column hydraulic press equipped with two side cylinders connected by a platen for the pre-pressing and pressing of rotors and stators, and a central cylinder for the extraction of the mandrel and fitting of the rotor shaft, as well as shaft removal during repair operations. Features a retractable table for stacking and handling rotors and stators. MAIN CYLINDERS 150 t - 2 hydraulic cylinders of 75 t each, with a stroke of 750 mm, joined by a slotted platen with a central bore of 250 mm diameter. - Maximum usable height between cylinder platens: 1,300 mm. - Minimum usable height between cylinder platens: 550 mm. EXTRACTION CYLINDER - 1 central cylinder of 80 t, with a 1,200 mm stroke. - Prepared to fit an extraction clamp; rod end threaded M 35 x 1.50 pitch, 40 mm length. - Maximum usable height of extraction cylinder: 1,300 mm to the root of the rod thread. - Minimum usable height of extraction cylinder: 100 mm to the root of the rod thread. Bdjdpfx Ajxc Ekdekasb TABLE AND STRUCTURE - Mechanically movable slotted table, 1,200 x 800 mm, with a 600 mm stroke, fitted with a worm gear reducer and 0.5 HP electric motor with brake. - Central bore on the table: 250 mm diameter; max. depth 550 mm. - Effective lifting capacity of the table for movement: 4 t. - Table traverse speed: 2,600 mm/min. - Internal front width: 1,250 mm. - Working height: 600 mm. HYDRAULIC POWER UNIT - Two-speed hydraulic unit, 5.5 HP, with automatic disengagement of rapid speed and independent speeds. Maximum pressure: 250 bar. - Digital control for maximum force during pre-pressing, pressing, and fitting; digital tonnage display. Pressure adjustment system via proportional valves. - Selector for approach and measuring speeds.

Condition: new, Year of construction: 2025, functionality: fully functional, pressing force: 50 t, table width: 700 mm, table length: 450 mm, total length: 1,160 mm, total width: 1,290 mm, total height: 2,085 mm, overall weight: 1,750 kg, pressure: 320 bar, working height: 850 mm, Equipment: documentation/manual, safety light barrier, The motorized hydraulic C-frame presses of the CM/NC series have four different powers ranging from 50 to 150 tons. Specially designed for stamping, die cutting, and forming work. The latest generation CM/NC series hydraulic presses have evolved into a versatility of uses, such as the possibility of incorporating these machines into automatic production lines. Model CM-50/NC Power 50 tn Motor power 5,5 kW Throat depth 265 mm Working speed 9,9 mm/s Approach speed 45 mm/s Return speed 60 mm/s Maximum pressure 320 bar Piston stroke 250 mm Bdodpewphvrjfx Akaeb Lower table 700×450 mm Upper table 550×300 mm Maximum vertical light 400 mm Working height 850 mm Total front 1.160 mm Total lateral 1.290 mm Total height 2.085 mm Weight 1.750 kg

Year of construction: 2006, condition: excellent (used), Punching capacity in sheets at 37 kg strength up to: 2 and 3 mm Bodpfx Akjd D Ryfoaodb with various punching tools

Year of construction: 1972, condition: used, Working length up to: 3900 mm hydraulic drive: 220/380 V, 1400 rpm, 0,75 kW Space requirement: 600 x 4650 x 1000 mm Bodpfx Aobnnyiekasdb Weight: approx. 250 kg in mobile version

Condition: used, machine/vehicle number: 478, pression: 36 t max. mounting height: 135 mm electrical connection: 380 V, 7,5 kW space needed: 1700 x 700 x 2150 mm weight: 1800 kg Bdsdpfx Asbb Tgujkasb

Condition: excellent (used), CATALOG NUMBER 7926 TECHNICAL DATA - Working length: 6200 mm - Working width: 150 mm - Working height: 1350 mm - 12 vertical hydraulic cylinders - Dimensions (L/W/H): 6580/1270/2350 mm - Weight: approx. 4000 kg Bedoyu Tp Tepfx Akasdb ADVANTAGES – very good condition – used press – original paint (not repainted) – intended for professional use Net price: 69,900 PLN Net price: 16,650 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the event of significant exchange rate fluctuations, the price may change)

Condition: new, Year of construction: 2024, neu 2024 7305 prompt, Zwischenverkauf v Italien 46400 € 886.24 € 1 100 to 500 mm 700 x 350 mm 800 x 600 mm 500 mm 300 mm 25 mm/s 4 mm/s 4 kW Bodpfx Aowiry Ijkajdb 1900 mm 1200 mm 2600 mm 2100 kg 2-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual incl. pressure switch

Condition: used, Year of construction: 2001, Manufacturer: SCHULER SMG, Model: HZPU-T 1000-2500/2100, Year: 2001, Serial No.: 7.5592, Press force: 1,000 t, Die change table 2,500 x 2,100 mm, Ram surface 2,500 x 2,100 mm, Max. ram stroke: 1,300 mm, Table draw cushion force: 30–200 t, Draw cushion stroke: 300 mm, Press control with Siemens Simatic OP 37 HMI, Control and switch cabinets. Bjdpox Ry Ntofx Akajdb +++ Attention: Machine is part of an online auction! +++

Condition: new, Year of construction: 2026, Working width 4500 mm Bsdjyyqnfepfx Akajdb Working height 3000 mm Number of cylinders 6 St. Dimensions (L/W/H) 5500x1400x3550 mm Weight 3000 kg S&S frame press Bavaria 2000 L, built 2026 ----- SHORT TIMED availabe exw warehouse Engelfried, 73447 Oberkochen NEW for the Holz-Handwerk 2026 trade fair in Nuremberg: Now also with semi-automatic positioning of the vertical press cylinders 1, 2, and 3 via enabling switch, including ON/OFF selector switch for beam 2 With automatic pressing cycle + manual control for corner connections tenon+slots and dowel connection/mortised tenon, can be switched using a selector switch on the control cabinet. With basic equipment for optional use of counter profiles if the sash is rebated on the loose part. CE version Basic machine in the strongest frame welded construction, with thick-walled special hollow profiles. Guideways of the pressure beams for the press corners in a low-abrasion machined version. Fast, smooth, manual width adjustment using ball-bearing carriage, fixing in 50 mm hole grid, optional motorized width adjustment with hydraulic clamping (at an additional cost). Height adjustment and pressing using long-stroke cylinders in one work cycle. Right-hand press corners with integrated horizontal cylinders, therefore no vertical positioning of the horizontal pressure cylinders is necessary, which avoids cylinder collisions. Lower support can be adjusted in several positions to the most suitable insertion height. 3 KW compact hydraulic system with integrated control block, variable pressure control from 20 - 120 bar, pressure gauge Control via touch button with separate control circuits for the vertical and horizontal press cylinders, mounted on a freely movable control panel. 2 vertical press cylinders, double-acting, stroke adapted to working height, piston diameter 60 mm Pressure force per cylinder max. 2100 kg 2 horizontal press cylinders, double-acting, 80 mm stroke, piston diameter 40 mm Pressure force per cylinder max. 1250 kg Abutment and pressure plate depth 100 mm Control cabinet on the machine base on the left, 400 volts, 50 Hz Machine with ready-to-connect plug 16 A Paint: RAL 7035 light gray with RAL 7016 anthracite gray Working size: length x height = 4,500 mm x 2,750 mm Note: Actual working size: 4,500 x 3,000 mm (length x height) Space required: 5,500 mm x 1,400 mm x 3,550 mm (LengthxWidthxHeight) Article medium pressure bar complete with pressure cylinder, pressure hose and shut-off valve up to 2,750 mm high Note: actual working height: 3,000 mm Article Individual pressure control for medium pressure bar, pressure control range up to max. 100 bar (For pressing cross-bar windows) Article infinitely height-adjustable cross pressure device, complete with pressure cylinder and abutment, throttle and shut-off valve Article Individual pressure control for cross pressure device pressure control range up to max. 100 bar (For pressing cross-bar window) Article Shut-off valve on the 3rd vertical cylinder Article Shut-off valve on the upper horizontal cylinder Article Shut-off valve on the lower horizontal cylinder ...

Year of construction: 1980, condition: ready for operation (used), A hydraulic press brake Steiner is available. Power: 30kW, max. pressing force: 300Mp, passage width: 2550mm, max. stroke: 240mm. Machine dimensions X/Y/Z: approx. 2700mm/2350mm/3450mm, weight: approx. 21000kg. An on-site inspection is possible. Bedsy Ax U Sepfx Akajdb