Used Mütek Mpp 280 S for sale (70,076)

Condition: like new (used), Year of construction: 2026, Special price for our demonstration machine Another machine, available immediately (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding residual wood of all kinds, including pallet sections. Pallets must be prepared with a saw or chainsaw so that they fit upright into the hopper – see image 2. Ideally, the dimensions should be approximately 40x20x20 cm so that the wood can lie flat on the sliding bed. This is when the machine operates most effectively. A hydraulic slide runs along the bottom of the shredder, pressing the wood against the rotor depending on the load. The material is shredded until it passes through the screen basket. Throughput rate up to 200 kg per hour *depending on the screen and how well the material is prepared. *Conveyor belt and overband magnet available at an extra charge. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent slide control, Commodity code: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 ph. Blades: 15 pieces, can be rotated multiple times Optional double blade row + €995 net Gedpfxedwktks Aafeuf Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting unit opening 630 x 820 mm Filling volume approx. 0.6 m³ Hydraulically operated slide Screen hole size selectable (10 - 30 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg (depending on accessories) Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm Moisture content: < 30 % dry basis Standard features include: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start - Fast hydraulics - Auto. OFF when the rotor is idling - Speed 70-90 rpm for high throughput performance - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant - MADE IN GERMANY Options for shredder: - Raise the shredder by 30 cm (preparation for conveyor belt) + €2,080 net - Articulated conveyor belt + €8,770 net Horizontal part: 1200 mm Inclined part: 2500 mm Angle: Adjustable from 0-60 degrees Discharge height: approx. 2000 mm + - 100 mm - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - Extend hopper + €940 net - Eco-rings: + €1,980 net (recommended for more than 15% hardwood) - Special scraper + €990 net (recommended for veneer or paper) - Double blade row + €995 net Requirements for raw material: - The moisture content (dry basis) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: like new (used), Year of construction: 2026, Demonstration machine with approximately 9 operating hours Another machine, available immediately (ex works Neckartailfingen) *Options available at an extra charge - see below Included: + Profile rotor for higher throughput We would be happy to provide a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via a freight forwarder, and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3-phase Knives: 15 pieces, reversible Option: double knife row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting chamber opening: 630 x 820 mm Hopper volume: approx. 0.6 m³ Hydraulically actuated slide Screen mesh size as desired (10 - 40 mm) Suction nozzle Ø 160 mm Weight: approx. 1,300 kg Dimensions (L x W x H): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% (dry basis) . Standard included: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 RPM for high throughput - Cycle control to avoid idle times - Performance-enhancing stepped control of the hydraulic slide - Pertinax guides for hydraulic slide - Vibration-damping machine feet - CE compliant . Optional shredder features at an extra charge: - Raise the shredder by 30 cm (preparation for a conveyor belt) + €2,080 net - Eco-rings: + €1,980 net (recommended for more than 20% hardwood) - Double knife row + €995 net Godpfjb Ny Eyjx Aafsuf - Special scraper + €990 net (recommended when shredding veneer or paper, or items with a material thickness of less than 3 mm) - Articulating conveyor belt + €8,770 net Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm - Automatic overband magnet + €5,980 net Alternatively, a fixed magnet block above the conveyor belt for regular manual removal + €990 net (in case of low metal content) - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) alternatively, manual start and stop of the belts + €595 net . Requirements for the raw material: - The moisture content (dry basis) must be below 30% - Installation temperature: temperature-controlled room at a minimum of +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Year of construction: 2026, condition: new, to sell the demonstration machine at a special price Our MVZ 7.5 granulator is suitable for shredding thin-walled parts and/or for post-shredding wood chips. More details after a test with your material. Larger systems are also available as an option The price is only for the shredder as shown in picture 1 - fan, cyclone and filter are options. Motor: 7.5 kW *larger systems on request (4 to 75 kW) Throughput up to 120 kg/h *depending on screen and material Much higher throughput rates can be achieved with the secondary shredding of wood chips. Details after the test with about 30 kg. Rotor diameter: 180 mm 6 rotary knives each 225 mm 4 stationary knives each 225 mm Gedpod N Dn Defx Aafjuf Dimensions: 930x730x1420mm weight: 450 kg, suction nozzle: 100 mm, Screens: 6.8 and 15 mm - other screens available, Price per sieve: €390. Price set replacement knife: 579 € Suitable e.g. fur: - Plastic waste of all Art.-No Various materials - HDPE, LDPE, PP, PS. PC, PA - biomass -Wood - Herbs etc. Parts from injection molding, blow molding, injection molding scrap, small bottles, cables, small pipes, profiles, etc

Condition: good (used), Equipment: type plate available, Used stainless steel container/pressure vessel Last use: Pharmacy, cosmetics Item number: 10806 Volume: 5700 liters Type: Vertical on 4 feet Height of feet: 1700mm Material (wetted parts): 14571 / AISI 316 Cover: Ø 720mm Design: Single-walled Operating pressure according to type plate: -0.3/+3 bar Tank dimensions: Outer diameter: 1600mm Overall width: 2200mm Overall length: 2200mm Gjdper A Embefx Aafjuf Total height: 2940mm Cylindrical height: 2500mm materials: Interior: 14571 / AISI 316 Outer parts: 14301 / AISI 304 Equipment: Nameplate: Yes Sight glass

Condition: good (used), Equipment: type plate available, Used stainless steel container with agitator Last use: Pharmacy, cosmetics Gusdpfxor A Emxe Aafef Item number: 10801 Volume: 5700 liters Type: Vertical on 4 feet Height of feet: 1700mm Material (wetted parts): 14571 / AISI 316 Cover: Ø 720mm Design: Single-walled Operating pressure according to type plate: -0.3/+3 bar Tank dimensions: Outer diameter: 1600mm Overall width: 2200mm Overall length: 2200mm Total height: 2940mm Cylindrical height: 2500mm materials: Interior: 14571 / AISI 316 Outer parts: 14301 / AISI 304 Equipment: Nameplate: Yes Sight glass Lateral agitator

Condition: used, mileage: 468,800 km, power: 206 kW (280.08 HP), first registration: 06/2003, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, emission class: euro3, total width: 2,550 mm, Equipment: ABS, crane, MAN LE 18.280 | Flatbed | HIAB 133 K PRO/HIPRO Crane | 18 t | 4x2 Vehicle Description: For sale is a MAN LE 18.280 equipped with a flatbed and a powerful HIAB-HIPRO crane. This is a robust piece of equipment, ideal for construction sites, timber handling, steel, containers, and more. The vehicle is mechanically sound, the crane is fully functional, and on-site demonstration is possible. Vehicle Data: • First registration: 06/2003 • Mileage: approx. 468,800 km • Engine power: 206 kW / 280 hp • Displacement: 6,871 cm³ • Fuel type: Diesel • Transmission: Manual • Drive: 4x2 • Emission class: Euro 3 Gujdpex Hb Rkofx Aafsf • Emissions sticker: None (green not possible) • Gross vehicle weight: 18,000 kg • Unladen weight: approx. 9,320 kg • Payload: approx. 8.7 t • Cab: Day cab Crane / Superstructure - HIAB 133 K PRO/HIPRO: • Multiple extensions (telescopic boom) • Outriggers at the sides and rear • Crane operational and can be demonstrated • Flatbed with drop sides Equipment: • ABS • No EBS • No ESP • Cloth seats • Dual passenger bench • Radio pre-installation • 24-Volt system • Durable and straightforward technology For further information, please feel free to contact us.

Condition: used, mileage: 468,800 km, power: 206 kW (280.08 HP), first registration: 06/2003, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, emission class: euro3, total width: 2,550 mm, Equipment: ABS, crane, MAN LE 18.280 | Flatbed | HIAB 133 K PRO/HIPRO Crane | 18 t | 4x2 Vehicle Description: For sale is a MAN LE 18.280 equipped with a flatbed and a powerful HIAB-HIPRO crane. This is a robust piece of equipment, ideal for construction sites, timber handling, steel, containers, and more. The vehicle is mechanically sound, the crane is fully functional, and on-site demonstration is possible. Vehicle Data: • First registration: 06/2003 • Mileage: approx. 468,800 km • Engine power: 206 kW / 280 hp • Displacement: 6,871 cm³ • Fuel type: Diesel • Transmission: Manual • Drive: 4x2 • Emission class: Euro 3 • Emissions sticker: None (green not possible) • Gross vehicle weight: 18,000 kg • Unladen weight: approx. 9,320 kg • Payload: approx. 8.7 t • Cab: Day cab Crane / Superstructure - HIAB 133 K PRO/HIPRO: • Multiple extensions (telescopic boom) Godpfxsx Hb Nme Aafjuf • Outriggers at the sides and rear • Crane operational and can be demonstrated • Flatbed with drop sides Equipment: • ABS • No EBS • No ESP • Cloth seats • Dual passenger bench • Radio pre-installation • 24-Volt system • Durable and straightforward technology For further information, please feel free to contact us.

Condition: good (used), Cleaning tank, ultrasonic cleaning basin, ultrasonic cleaner, ultrasonic bath -Manufacturer: Zender, stainless steel ultrasonic cleaning tank with heater, mobile -Basin internal dimensions: 2200/315/H280 mm -Temperature control range: 30 to 110°C -Operating temperature: max. 70°C -Ultrasonic generator: Zhangjiagang Zhongnuo type JYD Godpfx Aajzn H Alefsuf -Individual components: see photos -Dimensions: 2530/315/H700 mm -Weight: 150 kg

Condition: ready for operation (used), Dittel Marposs AE-SENSOR-SF 2xM5 3.0 VM10P O3PZ1114207 SN O16LW2808, used, in good condition, 100% functional, scope of delivery as shown in the photos. Guodpfxjznq Nco Aafof

Year of construction: 2014, condition: ready for operation (used), A T-S-I mixing and dosing system for adhesives is available. System type: two-component gear pump dosing system, material type: 2K silicone, swivel arm length: 1200mm, hose length: 2500mm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 650kg. Documentation available. On-site inspection is possible. Gedpfx Aaewfg E Djfsuf

Year of construction: 2022, condition: ready for operation (used), Offered is an SLM280 2.0 Single 700W year 2022, approx. 5350h, SLM MCS control, build volume X/Y/Z: 280mm/280mm/365mm minus thickness of substrate plate, 3D optics configuration: Single single/double 400W/700W, Dual 400W/700W IPG fiber laser, build rate: 113cm³/h, layer thickness: 20μm-90μm, feature size: 150μm, beam focus diameter: 80μm-115μm, scan speed max.: 10m/s, inert gas consumption process: 5l/min (argon), inert gas consumption purging: 110l/min (argon). Accessories: chiller package HRS050 L/W, screening station PSM100 V3, handling device BPH280, bottle lift, material change kit. SLM280 2.0 complete incl. PSM100, powder containers, substrate plates (1.2709 & AlSi10Mg), additional filter housings, filter elements. Fully serviced annually by SLM Solutions (service reports available). Availability from 01.12.2025, machine dimensions X/Y/Z: 2600mm/1200mm/2700mm. Inspection possible by arrangement. Guodpfx Ajxy R Ezoafef

Condition: ready for operation (used), Year of construction: 2016, A complete combined gravure/immersion roller system for Chadwick wallpaper rolls is available. Working width: approx. 560mm, substrate: paper/fleece, gravure printing process: water-based, printing units: 7, technical output: 180m/min, realistic output: 140m/min, production output: approx. 13000-15000 rolls/24h. 1) Windmöller & Hölscher 892C unwinder, year of manufacture: approx. 1970s. 2) 7x Chadwick gravure printing units. 3) Under-paper unwinding and gluing station. 4) Lenze pulling station. 5) 2x Saueressig cold embossing stations, year of construction: 1986/1989. 6) 2-section continuous dryer, total length: approx. 8m. 7) Double roller cooling station. 8) Web monitoring system WV-Star 500, year of construction: 2016. 9) Aligning and cutting system Saueressig 200440Y, inscription: G9, year of construction: 1989. 10) Ritter automatic roller machine. 11) Turning station Saueressig 201482Y, year of construction: 1989. 12) Inclined conveyor belt, working width: approx. 1000mm, length: approx. 3000mm. 13) Centralized supply and exhaust air unit SitVerba, year of construction: 2016, supply air fans: 7, exhaust air fan: 1. The entire system was equipped with new direct drives, drive control, system control, control cabinets, piping construction, process air technology, etc. and completely overhauled in 2016. Documentation available. On-site inspection is possible. Godpfjwqqv Dex Aafjuf

Year of construction: 2020, condition: excellent (used), Manufacturer : Smipack Gsdpfx Ajzhmbboafjuf Model: BP800AR 280ST Year : 2020 Type : Automatic monobloc shrinkwrapper

Condition: new, Year of construction: 2025, operating hours: 3 h, functionality: fully functional, feed rate X-axis: 7 m/min, workpiece weight (max.): 1,000 kg, working width: 2,500 mm, volume flow: 8,000 m³/h, year of last overhaul: 2025, overall weight: 3,200 kg, type of input current: three-phase, passage height: 210 mm, total height: 2,350 mm, total length: 2,450 mm, total width: 3,500 mm, working height: 950 mm, Ceetec DuoFlex Spray – The Coating Machine for Joiners, Furniture Makers, CLT and Glulam BSH Suppliers, and much more cases. Wherever a solid, straightforward, yet exceptionally well-equipped machine is needed, the DuoFlex Spray surface spray machine comes into play. Spraying doesn’t have to be complicated – not when you have a robust, long-lasting machine (made in Denmark, electronics from Germany – Beckhoff and others) that puts the operator at the center of it all. Everything is intuitive and easy to use, yet you get features you’ll struggle to find elsewhere – or only in significantly more expensive machines. Here are some hard facts about the DuoFlex Spray: 1. Color changes in just 3–5 minutes 2. System volume only 2.5–3L of paint/lacquer Gjdpfx Aajffc Tyjfouf 3. Suitable for both solvent-based and water-based coatings 4. Two fully separated circuits – ideal for solvent/water or clear/topcoat separation 5. Maximum reproducibility – thanks to smart programming that stores all key parameters automatically 6. Quick to learn – after just 4–6 hours of training, even a baker can spray better than a manual sprayer with 10 years’ experience 7. Modular expandability – drying systems, sanding units, preheating, robotic integration – all from a single source 8. Service that speaks your language – our owner spent nearly 10 years as a coatings manager and brings hands-on expertise to your shop. The machines are extremely durable, and if anything should go wrong, we maintain well-stocked spare parts warehouses in both Germany and Denmark Processing dimensions for the DuoFlex Spray: 1. Standard: 1,300 mm width × 200 mm height 2. Larger: 1,800 mm width × 200 mm height 3. Up to: 3,200 mm width × 330 mm height Length: from 250 mm up to virtually unlimited. If you want to coat CLT ceiling panels 16, 18, or 20 meters long, we’ll simply build the right handling system for you. Sound interesting? Would you like to try the machine in our technical center? Do you have specific requirements and wonder if we can deliver? Then I’ll be happy to help you personally. Best regards, Martin Bruhn Owner, Bruhn Lackieranlagen // Exclusive Sales Partner of Ceetec A/S – Middelfart, Denmark

Condition: new, power: 427 kW (580.56 HP), axle configuration: 6x2, color: white, driver cabin: day cab, gearing type: automatic, suspension: air, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, Mr. Seidel will be happy to assist you (by phone). Iveco X-Way AS280X58Y/ PS ON 6x2-4 Skip Loader Body: Meiller AK 16. T, radio remote control, CA axle configuration 6x2P, 3 axles, trailing axle, CT driver's cab Gujdpfxeyfqg Rs Aafjf Version: AS MY DR steering SX left-hand drive, EM emission level Europe, EP engine: 580 C13 Cursor 13, 580 HP, GT transmission: TX-12M, 12-speed HiTroniX, automated, MT permitted gross weight 26-28 t, RT drive axle type SR, single reduction, single axle, SU suspension: P air suspension on rear axle, TF brakes: DIS-DIS disc/disc, TT additional axle: STER steered trailing axle, single tires, US use: MIXED (for both road and light off-road use), VE vehicle variant: CABINAT standard chassis with cab, VS vehicle set-up: ON, WB wheelbase 3440 mm, 78742 power take-off NTX/10c, lower pump, 78507 rocking mode (free swinging mode), 00869 mirror cams. Cabin features at AS: Cab in vehicle color, 72775 hybrid bumper painted in cab color, 04047 luggage compartment left and right, 02758 electric cabin tilting device, 00553 headlamp protective cover, 00632 transparent sun visor externally mounted on roof, 00873 AS cab with standard roof (MY24), 72536 additional diesel/water heater 4 KW, 72970 standard fridge and storage box, 72251 with curtains at bed, 72270 single-piece lower bed, soft firmness/feeling, incl. adjustable head section, 78563 horn behind bumper (compressed air), 08549 reinforced parabolic spring at front axle, 05097 reinforced rear axle anti-roll bar D 60 mm, 14531 reinforced front stabilizer bar, 08299 air compressor 2-cylinder 630 ccm, 78713 battery charging socket, terminals, 07805 trailer hitch, Rockinger brand, 00733 rear axle ratio: i 2.85, 06156 trailer coupling, 40 mm, 130 kN, 02640 without roof spoiler, 00384 CAN bus interface CAN-OPEN for body control, 01340 free switch slots for body manufacturer, 78877 without GPS cruise control (Hi-Cruise), 02548 side marker lights, 75181 reverse warning buzzer, switchable, 05108 warning beacon, 50105 white IC 194, 30804 printed manuals (operating instructions), 30184 tire manufacturer: GOODYEAR, 20867 tire sizes 385/65 R22.5, 315/80 R22.5, 72920 operation and maintenance manual electronically, 00876 infotainment 10" TFT display + integrated Driver Pal, 02443 leather steering wheel, 01765 dashboard design: plastic with silver trim, 02759 air suspension for cab, 05629 sunblind roller for side window, driver and passenger sides, 02916 HI-Comfort driver's seat, multi-adjustable, air-suspended, integrated headrest and height-adjustable seat belt, lumbar support, with 3-stage cooling or heating function, 72543 LED front headlights, 78715 LED rear lights, 72629 fog lights incl. cornering/turning light, 00915 electric parking brake, 07306 axle load indicator in instrument cluster, 00883 corrective steering function (CSF) + lane departure warning system (LDWS), 00890 adaptive cruise control (ACC) with Stop & Go, 73240 electro-hydraulic power steering, 01076 high-performance engine brake. On request, we can provide you with a leasing or financing offer. Mr. Seidel (Tel.) will be happy to assist you. You can find more information on our website. ... Subject to errors, change, and prior sale ...

Condition: used, mileage: 106,098 km, power: 96 kW (130.52 HP), first registration: 06/2019, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,680 mm, fuel: diesel, gearing type: mechanical, emission class: euro6, total length: 6,750 mm, total width: 2,070 mm, Year of construction: 2019, Number of cylinders: 4 Engine displacement: 2,299 cc Unladen weight: 2,905 kg Payload: 595 kg Gross vehicle weight (GVW): 3,500 kg Body manufacturer: Klubb K32 APK (technical inspection): valid until 07/2027 License plate: VVJ-81-F Gsdpfxeznw Uxe Aafjuf Manufacturer: RG Waalwijk Havenweg 15 5145NJ WAALWIJK, NL robert.

Condition: as good as new (ex-display), 3 Pcs. “UNUSED – SEW R147 DVE280S4” for Sale Also many other Geared Motors on stock. Gujdoglvvujpfx Aafef Manufacturer: SEW Eurodrive Type: R147 DVE280S4 Power: 75 kW Voltage: 230 / 400 V Amperage: 240 / 137 A Hertz: 50 Hz Ratio: 8,26 : 1 RPM in/out: 1.480 / 179 Shaft ø out: 110 mm Weight: 887 / 952 kg

Condition: used, TECHNICAL DETAILS Mobile extractor for dusts, smokes, and gas produced by laser applications. Concerns the sectors of engraving, welding and sintering. Guedpfx Aouhb Eajafof - Power : 230 [V]

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Storage location: Nattheim Guodpfxjvvkmbs Aafef

Condition: used, Year of construction: 2022, operating hours: 2,600 h, Equipment: all wheel drive, Caterpillar M318 Gsdpfszqx Rtox Aafeuf Engine: Cat C4.4 – Power (ISO 14396): 129 kW / approx. 176 HP – Displacement: 4.4 l – Cylinders: 4 – Emissions: EU Stage V Travel performance Max. speed: up to approx. 35 km/h * Drive: hydrostatic travel drive * Steering: all-wheel steering with oscillating axle Tank & Hydraulics Diesel tank: approx. 350 liters * Hydraulic system: load-sensing hydraulics with multiple auxiliary circuits for attachments Air conditioning Only 2,600 operating hours and in very good condition

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, measuring range X-axis: 254 mm, measuring range Y-axis: 152 mm, measuring range Z-axis: 100 mm, workpiece weight (max.): 45 kg, feed length X-axis: 254 mm, feed length Y-axis: 152 mm, feed length Z-axis: 100 mm, travel distance X-axis: 254 mm, travel distance Y-axis: 152 mm, travel distance Z-axis: 100 mm, input frequency: 50 Hz, S-T Industries Profile Projector 22-2600 – 30" Screen, 5X Magnification | Precision Optical Comparator Now available at Used Machine Tools Ireland Ltd – a high-precision S-T Industries Profile Projector, Model 22-2600, with a large 30" (760mm) viewing screen, Heidenhain Quadra-chek 100 Control and 5X magnification lens, ideal for dimensional inspection in precision manufacturing. Previously used in a medical device company, this optical comparator is in very good condition and has been maintained to the highest standards. S-T Industries Profile Projector 22-2600 | 30" Screen | 5X Magnification | Very Good Condition 🔧 Manufacturer: S-T Industries 📍 Location: Ireland 📅 Model: 22-2600 🧰 Condition: Very good – ex-medical device company 📦 Available: Immediately 🛠️ Technical Specifications: Brand: S-T Industries Model Number: 22-2600 Control: Heidenhain Quadra-Chek 100 Screen Size: 30" (760mm) diameter Magnification Lens: 5X Worktable Travel (X-Y): 10" x 6" (254mm x 152mm) Glass Stage Plate: 12" x 8" (305mm x 203mm) Load Capacity: Approx. 45 kg (100 lbs) Screen Rotation: 360° with digital readout Illumination: Surface (Oblique) Illumination – Halogen Profile Illumination – Collimated light with adjustable brightness Focus Travel (Z-Axis): 4" (100mm) Power Supply: 230V / 50Hz Condition: Very good – ex-medical device company Country of Origin: USA Location: Ireland 🧭 Ideal For: Medical device manufacturing Aerospace & precision engineering Tool & die inspection Quality control and dimensional inspection labs Gjdew Nyfwepfx Aafsuf S-T Industries Profile Projector for sale Used optical comparator Ireland 30" screen profile projector Precision measuring equipment Dimensional inspection projector 22-2600 comparator S-T Industries 5X magnification projector Used metrology equipment Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, measuring range X-axis: 254 mm, measuring range Y-axis: 152 mm, measuring range Z-axis: 100 mm, workpiece weight (max.): 45 kg, feed length X-axis: 254 mm, feed length Y-axis: 152 mm, feed length Z-axis: 100 mm, travel distance X-axis: 254 mm, travel distance Y-axis: 152 mm, travel distance Z-axis: 100 mm, input frequency: 50 Hz, For Sale: S-T Industries Profile Projector 22-2600 – 30" Screen, 5X Magnification | Precision Optical Comparator Now available at Used Machine Tools Ireland Ltd – a high-precision S-T Industries Profile Projector, Model 22-2600, with a large 30" (760mm) viewing screen, Heidenhain Quadra-chek 100 Control and 5X magnification lens, ideal for dimensional inspection in precision manufacturing. Previously used in a medical device company, this optical comparator is in very good condition and has been maintained to the highest standards. S-T Industries Profile Projector 22-2600 | 30" Screen | 5X Magnification | Very Good Condition 🔧 Manufacturer: S-T Industries 📍 Location: Ireland 📅 Model: 22-2600 🧰 Condition: Very good – ex-medical device company 📦 Available: Immediately 🛠️ Technical Specifications: Brand: S-T Industries Model Number: 22-2600 Control: Heidenhain Quadra-Chek 100 Screen Size: 30" (760mm) diameter Magnification Lens: 5X Worktable Travel (X-Y): 10" x 6" (254mm x 152mm) Guedpfew Nygnox Aafof Glass Stage Plate: 12" x 8" (305mm x 203mm) Load Capacity: Approx. 45 kg (100 lbs) Screen Rotation: 360° with digital readout Illumination: Surface (Oblique) Illumination – Halogen Profile Illumination – Collimated light with adjustable brightness Focus Travel (Z-Axis): 4" (100mm) Power Supply: 230V / 50Hz Condition: Very good – ex-medical device company Country of Origin: USA Location: Ireland 🧭 Ideal For: Medical device manufacturing Aerospace & precision engineering Tool & die inspection Quality control and dimensional inspection labs S-T Industries Profile Projector for sale Used optical comparator Ireland 30" screen profile projector Precision measuring equipment Dimensional inspection projector 22-2600 comparator S-T Industries 5X magnification projector Used metrology equipment Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, mileage: 182,700 km, power: 210 kW (285.52 HP), first registration: 02/2016, fuel type: diesel, overall weight: 16,000 kg, axle configuration: 4x4, wheelbase: 3,800 mm, brakes: engine braking, color: yellow, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, Equipment: ABS, air conditioning, all wheel drive, cruise control, differential lock, low noise, onboard computer, soot filter, trailer coupling, Volvo FL280.16 4x4 All-Wheel Drive Chassis without Superstructure First registered: 2/2016 Only 182,700 km with documentation Short cab 4x4 All-Wheel Drive (cardan shaft) Manual transmission Gujdpfx Ajy Uyhqoafsf Euro 6 Leaf spring suspension Wheelbase 3800mm Tires 11 R22.5, tread depth approx. 50% Permissible total weight 16,000 kg The vehicle is from a single owner and is in well-maintained condition. Export/net price: EUR 43,900 All information is provided without guarantee, errors and omissions excepted.

Condition: used, mileage: 182,700 km, power: 210 kW (285.52 HP), first registration: 02/2016, fuel type: diesel, empty load weight: 8,750 kg, maximum load weight: 7,250 kg, overall weight: 16,000 kg, axle configuration: 4x4, wheelbase: 3,800 mm, brakes: engine braking, color: yellow, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, Equipment: ABS, air conditioning, all wheel drive, cruise control, differential lock, low noise, onboard computer, soot filter, trailer coupling, Volvo FL280.16 4x4 All-Wheel Drive Dump Truck or Chassis Gedpfxsy Uyhkj Aafouf First registered: 2/2016 Only 182,700 km with documentation Short cab 4x4 all-wheel drive (cardan shaft) Manual transmission Euro 6 Leaf spring suspension Wheelbase 3800mm Tires 11 R22.5, tread depth approx. 50% Trösch telescopic dump body Radio remote control Permissible total weight 16,000 kg Unladen weight 8,750 kg The vehicle is from a single owner and is in well-maintained condition. Export/net price: 43,900 Euros All information is without guarantee; errors and omissions excepted.

Year of construction: 1995, condition: ready for operation (used), There are four Wrapping Machines H&S available, year of construction: 1x 1984, 1x 1986, 2x 1995. Guodpfx Aaeipv D Ujfof