Used Järme Oy 11 Pockets for sale (13,872)

Condition: good (used), Medium frequency 1000 Hz spot welding machine, 400 V 50 Hz Make: DALEX Model: PMS 11-4 MF Arm reach: 950 mm with double-acting cylinder Rated power at 20% duty cycle: 180 kVA Secondary short-circuit current: 37 kA Secondary open-circuit voltage: 9 V Electrode force: 60-600 daN Iisdsvyk Sfopfx Aatef Weight: 550 kg

Condition: ready for operation (used), Year of construction: 2007, For sale: Electromagnetic separator, 2200x850. Iijdpfx Aaszht Uujtjf ✅ We can arrange transport. ✅ A wide selection of conveyor belts is available on site. Please contact us. We will help you select the appropriate conveyor belt to meet your needs.

Condition: excellent (used), Year of construction: 2018, CREEMERS 11kw SCREW COMPRESSOR SET 2018!! CREEMERS RCB 11 500C screw compressor (ATLAS COPCO screw stage)machine on a 500L tank with an air dryer. Iedpotq Sahjfx Aatjif Technical data: capacity: 1.47 m3/min; pressure: 10 bar; 11 KW engine; mileage: 25722h year 2018. PLN 12900 net PLN 15867 gross The compressor is fully functional; we provide service.

Condition: used, Chamber oven Borel Type: 11-73 Light dimensions (W x D x H) Iiedeymx Hzepfx Aatjf chamber above: 240 x 410 x 90 mm chamber below: 200 x 320 x 60 mm Heating power: 15 kW at 3 x 380 V AC, N, PE Max. temperature: 1400 °C Without control cabinet.

Condition: good (used), Year of construction: 1970, Ref. -No.: 10575 Manufacturer: VDF BOEHRINGER Iedpfx Aasxmd Uvetsif Type: T 11 Year of construction: 1970 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Germany Machine-No.: 40XXX Turning Diameter: Ø 700 mm Turning Length: 3000 mm Spindle Diameter: Ø 750 mm Spindle Bore: 70 mm Swing diameter over cross slide: Ø 450 mm

Year of construction: 2021, condition: excellent (used), functionality: fully functional, machine/vehicle number: C115101, Four CSF Inox (Italy) hygienic centrifugal pumps, year 2021, professionally decommissioned from an INEOS production facility by qualified engineers. In service for under 12 months — excellent, near-new condition. Ijdpfx Ajzmt Ufoatoif Four pumps available across three models: 1 x CS 32-110-2-1/BD — 0.75 kW, 1–12 m³/h at 1.6 bar, 1.5" tri-clamp 2 x CS 32-145-2-1.5/BD — 1.1 kW, 1–13 m³/h at 2 bar, 1.5" tri-clamp 1 x CS 50-175-2-10/BD — 7.5 kW, 1–54 m³/h at 4.1 bar, 2.5" inlet / 2" outlet tri-clamp All units: 316L stainless steel, 6-vane open impeller, EHEDG/3A hygienic design. ATEX pump II 3G Ex h IIB T4...T3 Gc with Orange1 Ex db IIC T4 Gb flameproof motors, IP66, inverter duty. Suitable for solvent, fragrance, cosmetics, food, beverage and pharmaceutical duties in hazardous areas. Available individually or as a set. Tracht Ltd supplies hygienic and sanitary process equipment. Viewings by appointment; collection and delivery can be arranged. Sold EXW Manchester, UK. Price on request. Please send an enquiry for individual quotes or a package price for the full set — we respond quickly.

Condition: repair required (used), Year of construction: 2004, Schneider compressed air screw compressor defective Iiedevmivcjpfx Aatof System needs to be repaired. Machine is being sold cheaply because it needs to be repaired. Engine power: 11 KW Volume flow: 1500 liters/min Compressor pressure: 10 bar Location: from warehouse 54634 Bitburg Machine is being sold as defective Without guarantee - without warranty -

Condition: used, Year of construction: 1995, pressure 100 t stroke 20 - 120 mm no. of strokes 40 - 240 /min distance between columns 1300 mm dayligth (stroke and adjustment up) 670 mm column travel -side 400 mm table surface area 1200 x 800 mm hole in the table 900 x 200 mm table height over floor 1150 mm ram surface 1130 x 650 mm ram adjustment 80 mm material width 250 mm Iijdozrpvcspfx Aatof material thickness 0,3 - 3,0 mm material cross-cut 750 mm² feed length 1 - 9999,9 mm power requirement 22,0 kW Weight 16,0 t dimensions (WxDxH) 3,7 x 2,5 x 3,7 m height over floor 3,7 m with infinitely variable PIV-drive, pneumatic clutch/brake combination (make Ortlinghaus), electronic press force monitoring (two channel), automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, motorised circular oil lubrication electronic roll feed (make Kaiser, type KWV 250)

Condition: good (used), functionality: fully functional, Jungheinrich EKS 110 Z 160E order picker: - Regularly serviced by Jungheinrich - Several units available - Battery from production year 06/2022 (11/2023) - Forklift from production year: 2012 (2015) - Operating hours: 2,073 h (3,200 h) - Load capacity: 1,000 kg - Lifting height: 1,600 mm - Includes charger Shipping via freight forwarder is possible upon consultation. € 2,900,- #8545-4 to -5 Jungheinrich ECE 320 HP order picker: - Production year: 2020 BAT2020 (2018 BAT2021 / 2020 BAT2020) - In very good condition - Regularly serviced by Jungheinrich - Several units available - Operating hours: 2,674 h (4,256 h / 3,565 h) - Incl. charger - Load capacity: 2,000 kg - Lifting height: 750 mm - Fork length: 2,400 mm Shipping via freight forwarder is possible upon consultation. € 2,900,- #8545-1 to -3 Still EK-X vertical order picker: - In good, functional condition - Regularly serviced by a specialist company - Several units available - Production year: 2017 - Operating hours: 2,760 h - Load capacity: 800 kg - Lifting height: 440 cm - Overall height: 240 cm - Includes charger Shipping via freight forwarder is possible upon consultation. € 3,500,- #8545-6 Isdpezrtdkofx Aateif

Condition: good (used), functionality: fully functional, power: 209 kW (284.16 HP), gearing type: automatic, fuel type: diesel, operation weight: 30,000 kg, maximum load weight: 11,000 kg, Year of construction: 2012, operating hours: 4,138 h, Equipment: air conditioning, all wheel drive, cabin, soot filter, Steering: Articulated steering with hydraulic power steering Steering angle: + - 40° Fuel tank capacity: 540 l Hydraulic tank capacity: 550 l Ijdpfx Aajvrd Epstoif Tire size front / rear wheel: 18.00 - 25 Axle load front / rear axle loaded: 29,400 / 11,600 kg Max. tractive force: 248 kN Drive motor: Cummins QSL9 Max. power: 209 kW/2000 rpm Max. permissible cross slope: 15% Max. permissible gradient: 28% Turning circle outside / inside: 6,713 / 3547 mm Bucket capacity (SAE, piled): 5.4 m³ Maximum speed loaded forward / backward on flat ground: 25.0 km/h Exhaust system: Silencer / catalytic converter Main dimensions: 9,715 x 2,600 x 2450 mm (LxWxH) Front / rear axle load unloaded: 13,100 / 16,900 kg Own weight: 30,000 kg Payload: 11,000 kg

Condition: used, mileage: 837,700 km, power: 371 kW (504.42 HP), first registration: 03/2013, fuel type: diesel, number of seats: 53, gearing type: automatic, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, onboard kitchen, parking heater, * Starliner C * FIRST GERMAN OWNER + ready for registration * Maintained according to service schedule * very good tires on all axles (front axle completely re-tired in 06/2026) Iijdpfx Ajzbfz Ioatsf * 371 kW / 505 hp - EURO 5 - EEV * ABS, ASR, EBS, ESP * Retarder * Cruise control * 50 + 2 + 1 seats * Vehicle length: 12,990 mm * Ski compartment * WC * 220 V socket in the luggage compartment / driver's area * VOLTAGE CONVERTER 3000 W * Fire alarm and extinguishing system * Air-conditioned driver's seat * Navigation system can be displayed on monitors * Driver's view camera * Rear view camera * Extended sleeping cabin * AIR CONDITIONING * Auxiliary heater * Convector heater * DVD player * External power supply * Alarm system * On-board kitchen * NEW TACHOGRAPH generation installed * MAN invoices available: oil cooler replaced, exhaust turbocharger, disc brake caliper, high-pressure fuel pump, axle link, brake disc, shock absorber, * etc. * Vehicle has very good equipment. * FIRST GERMAN OWNER with maintenance records (various invoices from MAN available). * Vehicle registered and in operation (mileage and condition may vary) * Underbody in good condition. * Note: * The customer is obliged to independently verify the condition and equipment of the goods / vehicle! * All information without guarantee * We reserve the right to sell the vehicle in the meantime * We refer to our general terms and conditions * Note: The customer is obliged to independently verify the condition and equipment of the goods / vehicle! All information without guarantee. We reserve the right to sell the vehicle in the meantime. We refer to our general terms and conditions.

Condition: used, round bar steel 33 mm square edge steel 30 mm L-beam 60 x 8 mm hole diameter in sheet thickness 20 in 13 mm hole punhing press: pressure 35 t hole punching press: throat 320 mm hole punching press: max. length of stroke 24 mm hole punching press: capacity (dia. x thick.) 30 x 9 mm hole punching press: capacity (dia. x thick.) 20 x 13 mm total power requirement 1,5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 1,5 x 0,7 x 1,8 m Profile steel shear with: - Hole punch - Notcher Iiodpfx Aasx Hp Ahstjf - Foot switch - Machine light - Mounted on a trolley

Condition: used, machine/vehicle number: 007667, Max width workable: 1100 mm Max length workable: 2500 mm Iiedpfxsu H R Hmj Aatjf Max height workable: 250 mm

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Wide Belt Sander SCM Sandya S600 RCS 110 | Excellent Condition | Year of Manufacture 2015 For sale is a high-quality wide belt sander from SCM (Sandya S600 RCS 110) in very good condition. The machine is fully operational and ready for immediate use. Iodpey Hn U Asfx Aatsif Working width: 1,100 mm Working height: 4–170 mm Main motor: 15 kW Belt speed: 3–16 m/s Feed speed: 3–18 m/min Belt length: 2,150 mm Steel calibration roller R (Ø 140 mm) Combination unit CS: Rubber roller (Ø 160 mm, 30 Sh) Electronic segmented pad (segment width 30 mm) Year of manufacture: 2015 Well maintained, technically flawless All information provided without guarantee. Technical data according to manufacturer or previous owner. Subject to errors, changes, and prior sale. No guarantee or warranty.

Condition: good (used), Year of construction: 1989, functionality: fully functional, For sale is an OTT Alpha wide belt sanding machine in a robust industrial design. This machine is ideally suited for calibrating and fine sanding solid wood, veneer, MDF, chipboard, and other wood-based materials. The proven OTT technology impresses with its stable construction and reliable sanding results. Manufacturer: OTT Type: Alpha 110 Wide belt sanding machine Calibrating and fine sanding machine Robust industrial design Dimensions in mm: 1860W x 1970D x 2100H 1100mm working width Max. workpiece thickness 1600, min. 3mm Sanding belt 2150 x 1120mm 4 + 8 m/min feed rate 11 kW motor 10 liters/min Weight: 2500kg Feed belt with rubber pad Sanding unit with wide belt Pneumatic belt tensioning Pneumatic sanding shoe control Control panel with clear machine control Ammeter for load monitoring Pressure gauges for pneumatics Emergency stop switch Large maintenance doors for easy service access Integrated dust extraction connections Solid machine construction for low-vibration operation Ideally suited for: Carpentry shops Joinery shops Isdpozrnlvefx Aatoif Furniture manufacturing Interior finishing Door and window manufacturing Series and single-piece production Condition The machine is in used condition with age-related signs of wear. It comes from a carpentry shop and impresses with its robust industrial quality. Inspection and trial run are possible at any time by appointment. Transportation is possible for an extra charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, intermediate sales and changes reserved. All information without guarantee.

Condition: used, mileage: 414,321 km, power: 355 kW (482.67 HP), first registration: 11/2021, fuel type: diesel, axle configuration: 6x2, wheelbase: 6,000 mm, fuel: diesel, emission class: euro6, total length: 9,510 mm, total width: 2,550 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2021, Maximum front axle load: 8,000 kg Rear axle 1: Max. axle load: 11,500 kg Rear axle 2: Lift axle; Max. axle load: 7,500 kg Number of cylinders: 6 Engine displacement: 12,902 cc Unladen weight: 10,180 kg Iodpjzc Efvjfx Aatjif Payload capacity: 16,820 kg Gross vehicle weight: 27,000 kg For further information, please contact Martin Vos Vos, Martin Martin Vos, or Martin Vos. = Company Information = hello

Condition: used, maximum load weight: 8,100 kg, overall weight: 11,800 kg, axle configuration: 2 axles, first registration: 04/2014, loading space length: 7,200 mm, loading space width: 2,500 mm, loading space height: 2,800 mm, loading space volume: 27 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2014, Equipment: ABS,

Condition: ready for operation (used), Schneider Electric ELAU PacDrive MC-4/11/22/400 SN: 2228230262 – the metal housing is slightly deformed in one area and one mounting point of the fan is damaged, see photo; used, in good condition, 100% functional, delivery as per photos. Iisdpfxex Eucko Aatjf

Condition: used, Year of construction: 2000, functionality: fully functional, Compact resistance butt welding machine from IDEAL-Werk (C.+E. Jungeblodt GmbH, Lippstadt, Germany) for joining band saw blades quickly and reliably. The BAS 050-11 is the entry-level workhorse of the BAS series — ideal for workshops, saw doctors, and sawmills that weld narrower carbon and bi-metal blades and need a dependable, low-footprint machine. Built to the usual IDEAL standard: solid German engineering, simple operation, and the kind of longevity that keeps these machines in daily service decades after they leave the factory. Technical Specifications Ijdjzcqn Nopfx Aatoif Type: BAS 050-11 Year of manufacture: 2000 Rated output at 50% ED: 4.5 kVA Connected load: 4.5 kVA Open-circuit (welding) voltage: 2.6 / 4.4 V Max. upsetting force: 2.2 kN Primary voltage: 415 V Frequency: 50–60 Hz Fuse protection: 16 A CE marked — Made in Germany Resistance butt welding for clean, strong blade joints Two-stage welding voltage (2.6 / 4.4 V) for flexibility across blade types Compact and robust — built for continuous shop use Steel strip: 6-50 mm Bandsaw for wood: 6-50 mm Metal bandsaw, bimetallic and tungsten alloys: 6-32 mm Hoop knife: 6-30 mm Stainless steel bandsaw: 6-30 mm

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1604/1999, total width: 2,500 mm, total height: 2,660 mm, total length: 21,500 mm, compressed air connection: 6 bar, type of input current: three-phase, overall weight: 3,500 kg, working width: 2,000 mm, working height: 1,000 mm, power: 14 kW (19.03 HP), table width: 1,310 mm, table length: 4,500 mm, Cape CP110 1 and CP110 2 - automatic hydraulic pallet nailing machine designed for top-side and bottom-side nailing. Machine allows for 2-way and 4-way pallet production. Stacker and Outfeed included. Iisdoy S Trwspfx Aatsf

Condition: excellent (used), Year of construction: 2016, HYDROVANE HV 11 vane compressor Iijdpfx Ajrdza Djatof Variable speed (inverter) 11kw motor Capacity 1.50 m3/min 10 bar pressure Year of manufacture 2016 The compressor is fully operational.

Condition: used, empty load weight: 3,700 kg, maximum load weight: 6,300 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 10/2016, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,770 mm, loading space volume: 50 m³, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Front for through-loading, 5 rows of aluminum V-slats, 7 pairs of lashing eyes on the loading area, loading height approx. 1,050 mm, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Iiedozr Sdvepfx Aatsf

Condition: used, Year of construction: 1995, Year of manufacture: Nov 1995 Iijdpoxwk A Iefx Aatef Serial number: 11 X 22.5 7 USED TRAILER TIRES 11 X 22.5 6 MM

Condition: used, Aerzen Blower GMA 11.4 Power: 10kw RPM: 2300 Iedpfx Aowq Sx Hsatjif Capacity: 420m3/h Pressure: 1 bar Diameter inlet: 100mm Diameter outlet: 100mm Approx Dimensions: 1300mm X 800mm X 1100mm

Condition: excellent (used), Face plate diameter 1000 mm Spindle mount DIN 55027 - size 11 Ijdpfswgk Ilex Aateif Weight 520 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel