Used Elumatec Ams 200 for sale (17,850)

Year of construction: 2014, condition: new, digital length measuring device, manufacturer: Heidenhain, ID 355 533-04 Measuring scale, type LF 481 – Signal 1Vss – Measuring length 200mm. Iodpjb T Uqijfx Afuoih

Condition: used, Two Forkardt faceplates Diameter 200mm 2 BHE 200 Iijdpfecurfyex Afush Short taper diameter 106.4 mm = Size 6 Bolt circle diameter 133 mm

Condition: used, Faceplate chuck Manufacturer: WMW Clamping range: 30 - 200 mm Iisdjcu Ngkopfx Afueh Maximum clamping force: 3500 kN Short taper size: 5

Year of construction: 1980, condition: good (used), 17 rolls, Ø 90 mm Isdpfx Afodnzvdsueih strip width: 50 - 200 (250) mm strip thickness: 2 - 10 mm

Condition: good (used), Hydraulic power unit, hydraulic pump, hydraulic pump -Max. pressure: 160 bar Isdjb A I Sxopfx Afuoih - Flow rate: 3 l/min per pump -Drive: 0.55 kW 1360 rpm -Hydraulic tank Quantity: 1 piece available -Weight: 95 kg

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 24 months, total length: 1,560 mm, total width: 970 mm, total height: 160 mm, tank capacity: 320 l, empty load weight: 1,050 kg, power: 13.5 kW (18.35 HP), electrical fuse: 50 A, New machine with a 24-month warranty. Advantages: Iodpfxjhyc T Eo Afusih + Robust construction + Boiler, center rod, and spiral made of stainless steel + Drive with two motors (spiral & boiler) + Mobile machine, on swivel wheels, with a fixed boiler + Flour dust hood closes gently with dampers, with automatic shut-off + Dirt protection cover for the feet + Short kneading time with excellent results + Control panel with push buttons for easy operation, with 3 timers + 1 reverse gear for mixing, 2 forward gears for kneading + Up to 99 different mixing/kneading programs can be stored + Switch for manual or automatic operation + Fast supply of spare parts within 1-2 working days Special accessories, optionally available at an extra charge: Soft starter - Machine can be operated with 32A instead of 63A Extra charge: + €1,630.00 net Technical data: - Flour capacity: 10 - 120 kg - Dough capacity: 15 - 200 kg - Boiler volume: approx. 320 liters - Outer diameter of boiler: 970 mm - Motor power: 13.5 kW (kneading spiral & boiler drive) - RPM at 50Hz (1st / 2nd gear): 98 / 196 - Connection values: 400V - 3Ph - 50Hz - 63A CEE plug - Dimensions in cm: 97 x 156 x 160 (W x D x H) - Height with flour dust hood open: 220 cm - Height top edge of boiler: 94 cm - Net weight: 1050 kg

Condition: excellent (used), Year of construction: 2012, Aluminum flat belt conveyor, Geppert belt AM-F, 7.30m x 0.30m, with drive The AM-F plastic modular belt stands out due to its sleek design. The frame width is only 14 mm wider than the chain. At the return roller, it is also only 40 mm wider. The frame, including the chain, is 95 mm high. The modular plastic chains of the AM-F are easy to clean, particularly durable, and maintenance is simple to carry out by replacing individual links. Technical data: Year of manufacture: 2012 Iiedog Ib U Hopfx Afujh Length: 7.30 m Width: 0.30 m Height: 1.00 m Drive: 220/240V 1PH Complete factory closure, large selection of storage platforms, pallet racking, shelving, and paternoster lifts. High-quality industrial machines, lathes, grinding machines, and hand tools. More items – new and used – can be found in our shop! International shipping costs on request!

Condition: good (used), Bosch Turbo Scara SR8 Robot + Controller MA4/200-7301-M + RH04.0S Manufacturer: Bosch PN pressure max. 8 bar Load max 8 kg Robot weight: 51 kg + Controller consisting of the following components: Rexroth / MA4/200-7301-M / Robot Controller Module Iedpfjhbhyuex Afusih Rexroth RH04.0S Swivel range / Technical data see image Since the item is available in multiple units and the robots have different working tools, these are only sample images and may vary. Item condition: used (Changes and errors in technical data and information are subject to change!) In addition to approximately 50 paternoster lifts, numerous other machines such as presses, robots, furnaces, industrial vacuum cleaners, etc. are available. Workshop equipment, workbenches, tool carts, tools, and forklifts are available in abundance. In total, 24,000 m² of production space will be dismantled and sold. Please also note our other offers. After purchase, the amount is due within 7 working days. You can find more items – new and used – in our shop! International shipping costs upon request!

Condition: refurbished (used), NIMO-KG SKV 200 MK Iiedjhua Hdspfx Afush ID.NO. 2196 Nimo-KG SKV 200 MK trolley lift for 200 liter trolleys. Dimensions 110 x 130 cm Height 480 cm Tipping height 380 cm.

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: Reg Nr. 976, Machine Name: Paddle dryer Used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Construction year: 2002 Speed: 107 U/min Pressure range: -1 to 3 bar (drying chamber), 6 bar in the double jacket Material: Stainless steel Driving force: 5,5 KW Model: EExdellCT4 Total content: 235 Liter Parts in contact with product: Stainless steel 1.4571 Gear box: Stirnradgetriebemotor Equipment: Double jacket, mechanical seal, shaft heater Dimensions: L 3400 x W 1100 x H 1500 mm Iodpfoitcvuex Afusih Empty weight: approx. 1600 kg Message: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame, Double coat, Mechanical seal, PT100 thermometer, Shaft heating with Maierkopf HWR 225, Sight glass, Technical documentation. Condition: Used very good Price: on request

Condition: used, Year of construction: 1998, MORI SEIKI SL-200 SMC, 4- AXIS TURN MILL CENTRE MAKE MORI SEIKI, MADE IN JAPAN MODEL SL-200 SMC YEAR 1998 CONTROL FANUC MSD- 518 (18-T) MAX. TURNING DIA. 390mm MAX. TURNING LENGT 507mm SWING OVER BED 680mm OVER CROSS SLIDE 510mm BAR WORK CAPACITY 51.0mm MAX. SPINDLE SPEED 0--4000rpm TURRET 12 stations, ALL DRIVEN stations TAILSTOCK YES SPINDLE BORE 65mm POWER TOOL SPEED (C-AXIS) 67- 3000rpm SPINDLE NOSE A8 (TBC) RAPID TRAVERSE RATE X: 18,000mm/min & / Z: 24,000mm/min ELECTRICAL POWER SUPPLY 37.9kVA MACHINE FLOOR SPACE 2650.0 X 1900.0 mm MASS OF MACHINE 4500 KGS PLUS 4- AXIS MACHINE SUB SPINDLE RENISHAW TOOL SETTING PROBE SWARF CONVEYOR GOOD RANGE OF TOOLING MACHINE MANUALS SWARF BIN MIST EXTRACTOR VERY CLEAN Iisdett Da Iepfx Afush

Condition: good (used), Engine freshly overhauled (over 12tys zl). 100% operational I invite you to contact me Iedpott T Nfefx Afujih

Condition: new, clamping range of chuck 10 - 200 mm height 67,5 mm daylight 65 mm external diameter Futter 200 mm external diameter Spannhebel 360 mm weight 4 kg Characteristics: • Self-centering. • Reversible jaws. • Fixed clamping levers allow fast workpiece changes. • Low weight and flat design minimize the center of gravity. The D-D quick chuck enables a quick product change and is suitable excellent with frequent component changes. You do not need a loose one Iedpfxsfv Awls Afuoih Quick release wrench, as the levers are integrated into the quick release chuck.

Year of construction: 2015, condition: excellent (used), Three-jaw chuck Manufacturer: Röhm Iisdpfxjd Th I Tj Afueh Diameter: 200 mm With individually adjustable jaws Short taper size: 6 Taper diameter: 106.390 Bolt circle diameter: 133.4 Weight: 24.5 kg Year of manufacture: estimated

Year of construction: 2001, condition: excellent (used), Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under power and is in very good condition. Pressing capacity in t: 200 Quantity of oil in l: 1100 Stroke in mm: 300 Table size (lxb) in mm: 600 x 600 Daylight in mm: 1000 Iiodshtaaqspfx Afueh Upper ejector stroke in mm: 25 Upper ejector force in t: 10 Total weight in kg: 12000 Operating pressure in bar: 6 Approach speed in mm/sec: 375 Working speed in mm/sec.: 18 - 40

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT22001007597, empty load weight: 6,200 kg, maximum load weight: 11,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2018, loading space height: 200 mm, total length: 11,600 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", color: red, Equipment: center pivot plate, Archive images! Chassis: Steel welded construction, double-curved with low-bed at the front and rear of the axle assembly, low-bed inclined for easy access, turntable with robust ball bearing race, foldable rear support, shims, side impact protection, quarter-panel fenders Lashing points: above the front axle: 2 pairs of ring lashing points, each 5 tons, at the front on the low-bed / rear axle: 6 pairs of lashing points on the side in the low-bed, each 8 tons. 6 pairs of lashing points, each 5 tons, between the longitudinal beams, a pair of stake pockets embedded in the outer frame, inner dimensions 70 x 40 mm, or instead of stake pockets, 5-ton ring lashing points embedded in the floor. Drawbar: tested 40 mm drawbar eye Axles: BPW drum brake axles Isdsi Ri N Uspfx Afujih Braking system: 2-line pneumatic braking system, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front Electrical system: 24 volts, multi-chamber lights, yellow side lights, 2 white position lights at the front 2 white/red marker lights at the rear, rotating beacon with bracket, pair of illuminated and extendable warning signs up to 3,000 mm, 2 x 7-pole non-interchangeable plugs at the front Floor: front curve with steel/diamond plate surface, storage compartment embedded in the ramp incline, driving area and in the middle between the beams with steel/diamond plate surface, rear incline with 70 mm softwood floor, low-bed platform including rear incline 5900 mm Ramps: attachment rail for aluminum ramps over the entire width, as a U-profile over the entire width Pair of aluminum ramps 800 mm long, approx. 400 mm wide, load capacity per pair 14,000 kg, Storage compartment for ramps between the beams Approval: contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear.

Condition: used, Year of construction: 2003, functionality: fully functional, input voltage: 400 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, saw blade diameter: 520 mm, saw blade bore: 50 mm, We offer this used GRAULE ZS 200 - F miter saw, year of construction 2003. Manufacturer: GRAULE Model: ZS 200 - F Serial number: 2003/3-13 Year of manufacture: 2003 Saw blade diameter: 520 mm Bore diameter: 50 mm Rated voltage: 400/230 V Iedpfjzx N T Iex Afueih Rated current: 6.4 A Frequency: 50 Hz If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 1999, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, volume flow: 2,780 m³/h, AL-KO Mobil-Jet 200, 3 kW, 400 V, year of manufacture 1999, 2,780 m³/h, connection diameter 200 mm, functional/can be demonstrated. Collection and loading will be carried out by the buyer. Iiodpfx Aozx Swiefush Piping can be included upon request. Price: EUR 1,900.00 net, ex works.

Condition: ready for operation (used), Unitek 406 TVD-200-16 / TVD6-200-16 K Compact Transistor Regulator SN:005389, used, normal signs of use, 100% functional, scope of delivery as per photos Iodpfx Asz Adgdsfusih

Condition: like new (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: RC 14-43, power: 810 kW (1,101.29 HP), GLASTON RC200 2136-380-R - Tempering furnace, 2100 x 3600 mm Group: Tempering - With convection (Low-e) Process: Tempering furnace, 2100 x 3600 mm Code: 90010x7 Iijdpfsz D Ic Nsx Afuoh Manufacturer: GLASTON Model: RC200 2136-380-R Year of manufacture: 2014 Condition: As is Tempering furnace - Maximum glass size: 2100 x 3600 mm - Minimum glass size: 100 x 250 mm - Glass thickness: 4 - 19 mm - Total power: 810 kW - Vortex Plus convection system (top) - Technical description can be found in the appendix as technical data - In good working condition, still in operation - In very good and clean condition - As is - Immediately available Dismantling and installation can be carried out by our service team upon request.

Condition: excellent (used), C.N.C. WORKING CENTER 3 axes (X-Y-Z) Vertical position of the panel (workpiece) Movable panel (workpiece), movable working head Numerical Control/Software MAESTRO Safety cabin (enclosure) of the working head No. 2 Workpieces fixing clamps (for the panels introduction in the working area Minimum workpieces dimensions (X - Y - Z) mm 200 x 50 x 8 Maximum workpieces dimensions (X - Y - Z) mm 3050 x 1300 x 95 WORKING GROUPS: No. 1 Drilling head (5-sided with Ro.Ax. roto-axial technology) F31LTC with spindles: - No. 24 Independent vertical boring spindles Iiedpfx Afjzza Sgsueh - No. 11 Independent horizontal boring spindles (6 in X + 4 in Y) No. 1 Circular Grooving Saw (on X axis) dia. (mm) 125 No. 1 Vertical electro-spindle (HKS63) power Kw 6,6 Automatic Tools Changing System - Tools storage plate (No. 6 folds-positions) OPTIONAL: Panel loading robot + Robot for unloading machined panels

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,425 h, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 201 mm, total length: 220 mm, total width: 202 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, table width: 450 mm, table length: 680 mm, empty load weight: 2,450 kg, Machine completely cleaned and overhauled. Iodpjy Tvtmefx Afujih 0.1 mm option available. Available for viewing at our facilities in Semsales, Switzerland.

Condition: used, mileage: 4,710 km, power: 55 kW (74.78 HP), first registration: 07/2025, fuel type: diesel, color: white, next inspection (TÜV): 07/2026, driver cabin: other, gearing type: other, Year of construction: 2025, operating hours: 165 h, total length: 5,090 mm, total width: 1,420 mm, total height: 2,340 mm, maximum speed: 50 km/h, * 224901 Swingo 200+ 2 Brush System * 225101 Euromot 5 Engine 55 kW (75 hp) * 225201 500-hour Long Life Oil * 225404 50 km/h * 225300 Hydro-pneumatic Suspension * 231701 Noise Reduction for Cabin & Container * 187001 Steering Wheel Knob * 226502 Radio DAB+ * 226601 Rear View Camera * 226701 Suction Nozzle Camera * 226801 Reverse Warning System, Switchable * 226901 12 Volt Socket * 235001 Standard Monitor * 226301 3-Point Safety Belt for Driver * 226401 2-Point Belt (Lap Belt) for Passenger * 230501 Rotating Beacon, Foldable * 228503 Sweeper Brush, Mixed (Poly/Steel) * 228801 Rollers for Suction Nozzle instead of Skids * 227301 Independent Brush Control * 227401 C-Shaped Brush Arms Isdpoz Sc T Usfx Afusih * 228701 17 mm Rubber Suction Nozzle * 228901 Stainless Steel Container Pipe * 229201 Hand Suction Hose Preparation * 190701 Standard Paint, RAL 9016 White * 1317SWINGO Operating Manual * 232601 Wheel Chock with Holder * 100901SWIN Modem Kit IntelliOPS Other: * Trade-in and purchase of vehicles and machines possible. * Sale price excludes transport and delivery. * No liability for printing and typographical errors. * Subject to errors, changes, and prior sale. * Offer subject to change. * Photos may vary. Price applies to the current condition. * All information without guarantee.

Condition: used, Year of construction: 1985, cutting diameter 200 mm band length . mm stroke . mm total power requirement . kW weight of the machine ca. . t dimensions of the machine ca. . m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Iijdpfxez Icx Hj Afujh We look forward to your visit. Your Markus Hirsch Team

Year of construction: 2020, condition: excellent (used), functionality: fully functional, USED YAMAZAKI MAZAK HORIZONTAL MILLING AND TURNING CENTER INTEGREX J-200 X 500 with Smooth G CNC - 36-tool magazine package (500U) - 15 kW AC turning spindle power - B-axis with mechanical locking every 1° - 15 bar coolant through the milling spindle and onto the flange - Lateral chip conveyor with belt (500U) - High/low pressure selection (requires opening/closing of the chucks with the spindle stopped) Iodpjz Ihmpefx Afuoih - Radio probing system - Renishaw RMP60 (complete system including probe and Mazatrol probing cycles, excluding the Renishaw "Inspection Plus" software) - SEI FILTRATION system - Tooling and mandrel kit Complete with operating manuals, CE certification, and standard accessories.