Used E-Packaging Saturno for sale (74,869)

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs Nlodpfx Aeyug Hxskish • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) Nljdpfxsyug R Rj Akijh • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: ready for operation (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 5-24 m/min. WEINIG Unimat 23 E Planer and moulder ----- 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ----- Diameter 40 mm Speed ??6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 3. Spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-200 mm Max. groove depth 35 mm Axially travel 80 mm Pressure shoe in front of left spindle, including spring-loaded lateral roller pressure 4. Spindle, right 8.3 kW (motor replaced) ----- Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 5. Spindle, top 7.5 kW ----- Diameter 40 mm Speed ??8,000 rpm Tool travel 112-200 mm Max. groove depth 35 mm Axially travel 45 mm Split pressure shoe in front of upper spindle, adjustable to the tool travel and pivoting away from the tool, spring-loaded. 6. Lower spindle 4.0 kW ----- Diameter 40 mm Speed ??6,000 rpm Tool travel 112-250 mm Max. groove depth 15 mm Axially travel 45 mm Spindles in general ----- All groove spindles with high concentricity. Lubrication points for the axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5-24 m/min. Feed roller in front of the first lower tool pneumatically controlled up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm Nodsxz Hh Uspfx Akijlh Machine electrical system ----- Operating voltage 440 V (voltage range 380 - 420 V), 50 Hz. Machine frame, tables and stops ----- Infeed table 2.0 m long (incl. jointing guide) Manual Waxilit pump for table de-resin removal One driven rubber roller (spring-loaded in the outfeed table) Two driven rollers in the machine table, hardened Machine operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Extraction after the upper spindle with mechanical digital display. ATS/System, automatic 2-axis positioning for spindles 3 and 5 Minimum working height 12 mm Electric height adjustment of the upper spindles and the feed Central lubrication points on the front of the machine Electronic digital displays on spindles 3 and 5 (axial), spindle 6 (radial) and spindle 4 (axial and radial) Safety and noise reduction ----- Full safety enclosure Easily hinged safety hood with window. Covers the ent...

Condition: ready for operation (used), Parta SN-E dough divider 1-pocket type 1500 Nedpfx Akjw I R Rzoislh year of build H040197 weight range 200 – 1800 grams max. capacity 1600 pcs/h

Condition: used, Year of construction: 2026, faceplate diameter 1.600 mm swing diameter 2.000 mm turning height 1.400 mm Control Fanuc max. Torque 23.863 Nm cutting capacity max. 3.000 kgf max. workpiece weight 10.000 kg table diameter 1.600 mm table speeds min power capacity - table 37/45 kW resolution 0,001 ° Working speed 0 - 1.200 °/min max. table speed 3,333 1/min Shank diameter 32 mm spindle cone ISO 7/24 / No.50 Spindlespeed 30 - 3.000 min/-1 power capacity - Tool Spindle 15 / 18,5 kW max. Torque 235 Nm ram cross section 220 mm x-axis 1.900 mm z-axis 900 mm cross rail adjustment 700 mm tool taper MAS-BT 50 number of toolpositions 24 (12 + 12) pos. max. tool weight 50,0 kg draw bolt DIN 69872.50 rapid feed (X / Z) 7,5 m/min feed speeds max. 7.500 mm/min rapid traverse of the crossrail 300 mm/min total power requirement 80 kVA weight of the machine ca. 34,0 t dimensions of the machine ca. 7,50 x 6,50 x 5,20 m CNC - Vertical Turret Lathe HANKOOK - VTC 160 E Nsdpfx Akjyiu N Djislh - NEWMACHINE

Condition: good (used), Code: 0299 Brand: SCM Model: S 630/E - CE Standard Njdeyi E T Tspfx Akielh Automatic thickness planer for carpentry workshops, custom furniture, wooden window frames, wooden carpentry, sawmills, plastics, composite materials, and various - CE Standard Technical data: Electronic table positioning Pneumatic roller pressure adjustment Drive system with 3 large-diameter motorized upper rollers - Easily interchangeable Electronic feed speed variator 4/20 mt/min Work table dimensions 630 x 1000 mm Max working width 630 mm Min/max working height 3/300 mm Min working length 260 mm N° 4 knives Motor Hp 7,5 Feed motor Hp 2 Suction mouth diameter 150 mm Overall dimensions mm 1360 x 1080 x 1220 h Weight kg 1000

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2018, next inspection (TÜV): 03/2027, loading space length: 7,629 mm, loading space width: 2,290 mm, loading space height: 1,495 mm, total length: 8,800 mm, total width: 2,550 mm, total height: 3,300 mm, Equipment: ABS, * Platform with cover tarp * HYVA hydraulic cylinders * 1st axle can be lifted * Aluminum rims * Wheel chocks ----* Wabco Trailer EBS-E & ECAS * BPW axles with drum brakes Nlsdpjzxax Iofx Akioh * Underrun protection ----* Tire size: 385/65R22.5 * Technical total weight: 39000 kg * Tare weight: 5980 kg * Overall length: 8800 mm * Inspection due: / ----Vehicle number/Vehicle: 12404----Errors and prior sale excepted----Advertisements and various inscriptions have been digitally removed.-----We will be happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/inspection, complete export processing, assistance with financing, application for export license plates, vehicle transport, vehicle registration, salvage and vehicle transport----?YOUR VTS TEAM

Condition: ready for operation (used), Siemens CPU315T-2 DP 6ES7315-6TH13-0AB0 Simatic S7 E-Version 1, factory-refurbished by Siemens as per orange label, scope of delivery as shown in photos. Nlsdpfx Akszzhr Ieieh

Condition: used, maximum load weight: 29,600 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 03/2012, next inspection (TÜV): 03/2027, loading space length: 7,529 mm, loading space width: 2,437 mm, loading space height: 1,508 mm, total length: 8,720 mm, total width: 2,550 mm, total height: 3,200 mm, Equipment: ABS, * Platform with cover * 1st axle can be lifted ----* Schmitz axles with disc brakes * Wabco Trailer EBS-E * WABCO SmartBoard unit * Folding underride guard * Wheel chocks ----* Tire dimension: 385/65R22.5 * Technically permissible total weight: 39,000 kg * Tare weight: 5,400 kg * Overall length: 8,720 mm * Next inspection due: 09/2027 Nodszv Dgkepfx Akislh ----Vehicle number: 12408----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed. We will gladly assist you with all formalities involved in purchasing a vehicle. Just let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/SP inspection, complete export processing, arranging financing, applying for export license plates, vehicle transport, vehicle registration, recovery and vehicle transport.----YOUR VTS TEAM

Condition: good (used), functionality: fully functional, Year of construction: 2008, Well-maintained, used E Brake by Safan Type E Brake 100 3100 Capacity 3100 x 100 tons Y1, Y2, X, R, Z1, and Z2 CNC controlled Manual crowning Hydraulic Wila NS top clamp Nsdozbhk Ejpfx Akiolh

Condition: new, Year of construction: 2023, total length: 2,450 mm, - Arbeitshöhe max. – innen 8,13 m - Arbeitshöhe max. – außen 6,98 m - Plattformhöhe max. – innen 6,13 m - Plattformhöhe max. – außen 4,98 m - Plattformhöhe – eingefahren 1,07 m - Plattformlänge – außen 2,26 m - Plattformlänge – außen, ausgeschoben 3,18 m - Plattformausschub – Länge 0,91 m - Plattformbreite – außen 1,16 m - Geländerhöhe 1,10 m - Höhe der Fußleiste 15 cm - Max. Personen auf der Plattform (innen/außen) 2 / 1 1 - Verfahrbar bis max. Plattformhöhe 6,13 m 6,13 m - Fahrgeschwindigkeit – eingefahren 3,2 km/h - Fahrgeschwindigkeit – ausgefahren 0,8 km/h - Steigfähigkeit – eingefahren 25% - Wenderadius – innen/außen 0 / 2,29 m - Hub-/Senkzeit 32 / 26 sec - Neigungssensor-Aktivierung (Längsachse/Querachse) 3° / 1,5° - Nichtmarkierende Vollgummi-Reifen 38×13 cm - Antriebsart 24 V DC (4×6 V 225 Ah) - Tankinhalt Hydrauliksystem (E-Drive) 15 L - Geräusch-/Schalldruckpegel (Boden) < 70 dBA - Geräusch-/Schalldruckpegel (Plattform) < 70 dBA - Vibration < 2,5 m/s - Hinten eingelassene Steckdose für Ladegerät - Stromkabel zur Plattform ohne Fehlerstromschutz - Stromkabel zur Plattform - Senk-, Neigungs- und Bewegungsalarm - Plattform mit Riffelblechboden - Doppel-LED-Blitzwarnleuchten - Elektronik Horn (Hupe) - Klappbares Geländer, Schwingtür in voller Geländerhöhe (GS-2046) - Klappbares Geländer, Schwingtür auf halber Geländerhöhe (GS-2032) - Befestigungspunkte für Auffanggurte - Schutzabdeckung für das Plattformbedienpult - Plattform-Lasterfassungssystem - Proportionale Fahr- und Hubsteuerung - Plattformausschub - SmartLink Zweizonen-Steuerung Nledpey S Epzefx Akieh - Notablass zum Senken der Plattform - Mehrfachscheibenbremsen an zwei Rädern - Vorrichtung zum elektrischen Lösen der Bremsen - Staplertaschen - Vorrichtung zum manuellen Lösen der Bremsen - Vollintegriertes Diagnosesystem mit Batterieanzeige - Lochfahrschutz - Nichtmarkierende Vollgummi-Reifen - Tech Pro Link Anschluss - Verzurrpunkte und Kranösen

Condition: used, Year of construction: 2002, x-travel 600 mm y-travel 400 mm z-travel 400 mm table-size 800 x 400 mm spindle taper ISO Sk 40 spindle turning speed range 10 - 3150 U/min total power requirement 12,0 kVA weight of the machine ca. 2,2 t dimensions 2,0 x 1,85 x 1,95 m CNC Universal Milling Machine - Heidenhain TNC 310 with handwheel Nledpjy N D Idofx Akijh - Hydraulic tool clamp - Central lubrication - Coolant system - Machine light - Machine feet - Enclosure

Condition: ready for operation (used), Siemens 6FM1706-3AA20 Positioning/Counter Module WF706, E-Stand A / 3, SN11270, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Nsdpfx Aksi I I D Esijlh

Condition: ready for operation (used), Siemens 6FM1706-3AA20 Positioning/Counting Module WF706 E-Stand A / 3 SN11458, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Nsdpfxsi I I D Ne Akielh

Condition: new, High-temperature resistant corrosion protection and temperature-resistant special electrode Nlodpehhykiofx Akijh Manufacturer: Capilla Type: 521 E HL Diameter: 2.5 mm Length: 350 mm Weight: 5 kg

Year of construction: 2024, condition: new, Hello. I have a semi-automatic packaging machine for bulk goods such as spices, flour, sugar, semolina, etc. for sale. The machine packs weights from 5g to 5kg with 1% accuracy. The packaging speed is 500 to 1000 bags or sachets per hour. The machine consists of: 1. a screw feeder that feeds the product into the packaging machine. Using a sensor, the feeder automatically fills the packaging machine's hopper. The hopper has a capacity of 45L. 2. a packaging machine 3. a plastic bag sealer that seals the already packed bags. The machine's power requirement is 900W, 3-phase, 50Hz. The entire system weighs 150kg. Dimensions: 1000 x 650 x 2000 mm POSSIBILITY TO PACK PRODUCTS IN CANS OR JARS!!! PayPal payment available!!! Nlsdpott Ip Isfx Akish

Condition: used, Year of construction: 1990, x-travel 600 mm y-travel 400 mm z-travel 420 mm Nledpfx Ajtqmm Ajkieh control TNC 355 Heidenhain Main spindle: turning speed range - main spindle 20 - 4.000 min/-1 power capacity - main spindel 7 kW transmission ratio 3 tool taper SK 40 distance spindle /table 127 - 567 mm spindle diameter in front bearing 55 mm stroke of quill vertical 75 mm tool clamping 10 kN swivellable +/- 90 ° work table: table surface area 900 x 458 mm T-slots 7x 63 x 14H7 feeds: feed range 1 - 5.000 mm/min Feed force 5,4 kN rapid traverse ( X / Y / Z ) 7 / 7 / 6 m/min total power requirement 13 kW weight of the machine ca. 3,0 t dimensions of the machine ca. 4,0 x 4,0 x 2,1 m Tool Room Milling Machine - Universal HERMLE - UWF 900 E - Spindle-Head swivable +/- 90°

Condition: used, Year of construction: 1995, functionality: unexamined, machine/vehicle number: XXX, We are going to sell 3 wire edm machines and 1starthole edm machine Nljdpfetylpisx Akieh

Condition: new, thread dia. M6 - M36 mm turning speeds 156 U/min radius 1200 mm angle adjustable from - to 0 - 90 Grad weight of the machine ca. 0,4 t dimensions of the machine ca. 1,4 x 0,1 x 0,7 m Electric tapping machine / 4450136SET Fast and precise thread cutting with freely positionable swivel arm - The machine head can be swiveled from 0 to 90 degrees - Quick change chuck with slip clutch for safe thread cutting without Risk of breakage - Right-left rotation can be selected on the machine head - Setting of thread size, speed, pitch and cutting depth via Touchscreen on the swivel arm - Manual mode: the stops after the set cutting depth is reached Spindle automatic, forward and reverse must be activated manually. - Automatic mode: changes after the set cutting depth is reached the machine automatically from the forward to the return - ideal for that Thread cutting of several blind holes Nodpog N Nl Isfx Akislh Incl. 1 each GT12 M6, M8, M10, M12, M14, M16, M18, M20, M22-24, M27, M30, M33, M36 Substructure 900 x 600 x 875 mm

Condition: used, A packaging machine is being sold. Njdpfx Aeur N Ncekislh The machine can pack goods in boxes or bags.

Condition: excellent (used), mileage: 370,967 km, power: 375 kW (509.86 HP), first registration: 12/2016, fuel type: diesel, fuel: diesel, brakes: intarder, color: orange, gearing type: automatic, number of gears: 12, emission class: euro6, loading space length: 10 mm, Year of construction: 2016, Equipment: AdBlue, crane, = Additional options and accessories = Nodoutxw Sspfx Akijlh - PTO = More information = Transmission: AC Tronic, 12 gears, Automatic Empty weight: 19.480 kg Carrying capacity: 16.520 kg GVW: 36.000 kg Crane: FASSI F365RA .2.26 E-Dinamic + JIB, year of manufacture 2016, behind the cab Technical condition: very good Visual appearance: very good

Condition: used, maximum load weight: 32,050 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 03/2009, next inspection (TÜV): 02/2021, loading space length: 9,100 mm, loading space width: 2,500 mm, loading space height: 400 mm, total length: 9,350 mm, Equipment: ABS, * Lift axle (high mount) * Air suspension * Disc brake Nledpez Nu I Rjfx Akieh * Unladen weight: 5950 kg * Brakes * Aluminum rims ----Internal vehicle number: 9786-----Errors and prior sale excepted.

Condition: used, Conveyorized chamber vacuum packaging machine for industrial food processing This VC999 K7B2 is a conveyorized chamber vacuum packaging machine, built by VC999 Verpackungssysteme in Switzerland, with a stainless steel, all-enclosed construction that avoids sharp edges and corners where dirt could collect. The machine runs two to three cycles per minute and features bi-active sealing bars with electronic temperature control and adjustable contact pressure, allowing secure sealing even with greasy or moist products. The B-version adds a perforation blade with bag waste suction on both sides, so trim is removed automatically during the cycle. Evacuation stops at the evaporation point, protecting product quality throughout the process. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Conveyorized chamber vacuum packaging machine (belt) Output: 2–3 cycles per minute Sealing: Bi-active sealing bars, electronic temperature control, adjustable contact pressure Trim removal: Perforation blade with bag waste suction on both sides (B-version) Nsdpjz Nc Nnefx Akiolh Vacuum control: Evacuation stops at the evaporation point Construction: Stainless steel, all-enclosed

Condition: new, Code: N0235 Brand: CASADEI INDUSTRIA Model: E 350 PM Automatic edge bander with hot melt (EVA) glue pot, chain panel feeding and pre-milling Nlodeyvt Exspfx Akieh Maximum finishing quality Chain feeding system Pre-milling (E350PM) 3 free spaces for finishing units High performance 7 m/min feed speed 45 mm panel height 2 mm edge coils Minimum space occupied 2,30 m length Easy to use Unit settings with a piece of edge Easy and intuitive use of machine 3 position infeed fence 0-1-2 mm (according to edge thickness) Chain panel feeding Firm grip of panel guaranteed by special non-slip rubber on the pads. Linear feeding ensured by double sliding tracks with a special geometric profile accurately machined with precision to a hundredth of a millimetre. Long lasting monolithic frame fully processed only in one cycle on a CNC machining centre. Pressure bar with locking levers Top pressure bar with a double row of rubber wheels mounted on bearings, with locking levers and position indicator Pre-milling INVISIBLE GLUEING LINE DIAMOND tools Ø= 60mm H= 54mm HF motors 200 Hz – 12.000 rpm – 0.75 kW (each) Dedicated suction system and blower for panel cleaning before glueing Glueing unit PERFECT GLUEING, QUICK AND PRACTICAL SET-UPS 6 heating elements to guarantee uniform glue temperature. Motorized glue spreading roller with an internal electrical heating element. Inferior Teflon-coated glue pot to permit complete and rapid cleaning. Pneumatic shear, pressure rollers, edge feeding system DETAILS THAT MAKE THE DIFFERENCE Edge feeding synchronized with panel being processed Oscillatory movement of the cutting shear unit to guarantee perfect glueing Quick and precise positioning of the pressure rollers. The system “reads” the edge thickness, making mistakes impossible! Trimming cut-off PERFORMANCE AND VERSATILITY End trims front and rear excess edge Working cycle controlled by PLC Exclusion from control panel (PLC) Flush trimming unit Flush trimming unit with vertical disc copiers as standard Possibility of processing for edges from 0.4-2 mm Anti-adherence / release agent spraying unit (Opt.) INSTANT PERFECT CLEANING Spray function controlled by PLC 2 sprayers (lower and upper) and liquid tank Infrared lamp (Opt.) TO GUARANTEE THE BEST GLUEING CONDITION Creates the best conditions for perfect glueing Heats panels and removes all traces of dampness.

Condition: excellent (used), Year of construction: 2004, Maier ML 26 E CNC lathe TECHNICAL DATA Number of axes: 11 Spindle bore: 32 mm Path speed: 32 m/min Control: Maier Pro GE-Fanuc Guide bush: 451.001 Main spindle Clearance: 26 mm C-axis: Yes Mechanical indexing 5°: Yes Headstock stroke: 220 m Main spindle, speed: 0 - 6000 rpm Power: 3.7 kW / 5.5 kW (7.5 kW) Collet chuck: 161E Counter spindle Clearance: 26 mm C-axis: Yes Mechanical indexing 5°: Yes Max. travel (Z): 220 mm Counter spindle, speed: 0 - 6000 rpm Main spindle, power: 1.1 kW Collet chuck: 161E Cross machining Basic holder for turning rings 5 pcs. 16 x 16: Yes Number of driven tools: 4 Power of the driven tools: 0.5 kW Back machining Drive power: 0.5 kW Number of tools: 4 of which driven tools: 4 Collets: ER16 Tool turret Number of tools: 16 Nlodpsu S Rivjfx Akish Number of driven tools: 8 Drive power: 0.5 kW C-axis: 360 ° Z-axis: 175 mm X-axis: 200 mm Collets: ER16 SCOPE OF OFFER U.A: (list not exhaustive): Maier ML 26 E CNC lathe Oil mist separator transformer Chip conveyor High pressure pump / belt filter system Fire extinguishing system LNS bar feeder Complete operating documentation Exact scope of offer according to photo gallery No responsibility is taken for the accuracy, completeness and timeliness of the information