Used Cormak S-200R Manual for sale (74,452)

Condition: refurbished (used), Year of construction: 2023, operating hours: 813 h, functionality: fully functional, working width: 900 mm, area performance: 5,700 m²/h, overall weight: 957 kg, water tank capacity: 200 l, battery voltage: 36 V, The Kärcher B200R D90 Dose is a 2023 model and has only 813 operating hours. We have completely overhauled the machine, with every component cleaned and functionally tested. Hedpfx Abjxx Ta Eokefn The squeegee, base plate, and collision protection have been sandblasted and newly powder-coated in-house. New rubber lips on the squeegee ensure optimal suction results. The machine is sold with brand-new, maintenance-free gel batteries. Additionally, the Kärcher B200 R is equipped with a detergent dosing system, which precisely meters the cleaning agent into the cleaning process. For improved illumination of the working path, the machine also features an auxiliary work light that can be switched on as needed. The Kärcher B200 R is ideally suited for medium to large areas such as logistics warehouses, workshops, or underground car parks. Technical specifications: Working width: 90 cm Fresh water tank: 200 liters Suction width: 118 cm Weight: 957 kg

Condition: new, functionality: fully functional, Year of construction: 2026, Advantages of DC Chip Extractors The purpose of the Vibra Motor shaking system is to ensure stable operating parameters and to monitor the proper functioning of the extractor. A heavy-duty design enhanced with a radial fan guarantees maximum vacuum efficiency. The extractor is intended for dry sawdust and wood chips. Thanks to the airtight construction, it is suitable for operation both outdoors and inside the facility. Adapted for operation in a positive-pressure system (fans work on the contaminated side of the dust collector) as well as in a negative-pressure system (fans work on the clean side of the dust collector). The sound-insulated design and specially shaped impeller blades contribute to quiet and efficient operation while minimizing electrical power consumption. A key advantage of the extractor is the use of flexible and durable seals in critical areas, improving the tightness of the entire system without heat loss at connection points. A multifunctional device with a modular system allowing any configuration of the extractor. Warm air recovery system. Control cabinet equipped with an intuitive control panel that allows monitoring of filter contamination levels. For filtering smaller particles, a filter such as HEPA should be used. It is forbidden to use this extractor in an explosive atmosphere. The extractor is not designed to work with wet material (e.g., wet sawdust). Hfedpfxex Agpzo Abkon Industrial Chip and Sawdust Extractor DCV21750 Technical Specifications Motor Power: 25 HP / 400 V, 50 Hz Extraction Capacity: 21,750 m³/h Inlet/Outlet Diameter: 400 / 400 mm Suction Speed: 28 m/s Number of Filters: 2 × 48 Number of Waste Bags: 8 Dimensions (L × W × H): 4600 × 1700 × 3500 mm Weight: 1400 kg SPECIAL OFFER!!! LAST UNIT IN STOCK!

Condition: new, Year of construction: 2026, The CORMAK electric scissor lift table with a lifting capacity of 1000 kg is a stationary U-shaped lifting platform designed for convenient handling of pallets, containers, crates, and warehouse loads. The U-shaped design allows a standard pallet truck to enter directly into the table area, making loading, unloading, and positioning goods at the required working height much easier. This model is ideal for warehouses, logistics centers, production facilities, picking areas, and shipping zones where fast pallet handling is important without the need for additional ramps or recessed floor installations. The low minimum height of 85 mm allows easy access with a pallet truck, convenient load positioning, and lifting the goods to the operator’s working level. Hodpow Rl Imofx Abkefn The 1450 × 1140 mm platform provides sufficient space for handling standard pallets and loads with a larger base. A lifting capacity of 1000 kg, 400 V power supply, and a 1.5 kW lifting motor make the table well suited for everyday warehouse, production, and logistics operations. U-shaped design – easy loading with a pallet truck The main advantage of this model is the U-shaped construction of the scissor lift table. The open section allows a pallet truck to be inserted under the pallet and the load to be positioned directly on the platform. This enables the operator to prepare goods more quickly for lifting, order picking, packing, or inspection. This solution is particularly practical when handling EUR pallets, transport containers, bulk goods, and loads prepared for shipment. The pallet lift table makes work easier in situations where a conventional rectangular platform would require additional equipment or more time-consuming reloading. Low 85 mm profile for convenient pallet handling The minimum height of 85 mm is an important feature when working with pallets and pallet trucks. The low-profile design makes it easier to position the load directly on the platform and reduces the need for manual handling of goods. Main advantages of the CORMAK U-shaped scissor lift table 1000 kg lifting capacity – suitable for handling pallets, containers, crates, and warehouse goods. U-shaped design – convenient loading and unloading using a pallet truck. Low minimum height of 85 mm – easy pallet positioning without the need for ramps. Maximum height of 860 mm – ergonomic working height for packing, order picking, and goods inspection. 1450 × 1140 mm platform – sufficient space for standard pallets and larger loads. 1.5 kW lifting motor – efficient load lifting in everyday operation. 400 V power supply – suitable for industrial and warehouse applications. Remote control operation – convenient lifting and lowering of the platform at the touch of a button. Safety limit switches – control of the maximum working height. Safety bar – protection of the area underneath the platform during lowering. Net weight of 240 kg – ensures stability during operation under load. Technical Specifications PARAMETER VALUE MAXIMUM LIFTING CAPACITY 1000 kg MIN. HEIGHT 85 mm MAX. HEIGHT 860 mm TABLE LENGTH 1450 mm TABLE WIDTH 1140 mm LIFTING MOTOR POWER 1.5 kW WEIGHT 240 kg POWER SUPPLY 400 V UDT INSPECTION REQUIRED YES

Condition: new, Year of construction: 2026, CORMAK Electric Scissor Lift Table – 2000 kg Capacity The CORMAK Electric Scissor Lift Table with a 2000 kg load capacity is a heavy-duty stationary lifting platform designed for handling substantial loads in warehouses, production facilities, logistics centers, workshops, and industrial environments. The unit enables convenient lifting, lowering, and positioning of goods, pallets, crates, containers, machine components, and structural elements at the required working height. This model is designed for applications where standard lift tables with lower capacities are insufficient. With a maximum lifting capacity of 2000 kg, 400 V power supply, and a 1.5 kW lifting motor, the table is ideal for intensive handling of heavy materials and repetitive industrial operations. The 1300 × 850 mm platform provides stable support for loads, while the lifting range from 230 mm to 1000 mm allows the working height to be adjusted to suit the operator, workstation, machine, production line, or loading area. It is a practical solution for improving workplace ergonomics and reducing manual lifting. Key Advantages of the CORMAK Electric Scissor Lift Table 2000 kg load capacity – suitable for handling heavy loads, pallets, crates, molds, and industrial components. Lifting range: 230–1000 mm – allows convenient adjustment of working height. 1300 × 850 mm platform – stable surface for handling goods and production components. 1.5 kW lifting motor – ensures efficient operation during demanding lifting tasks. 400 V power supply – designed for industrial applications. Remote control operation – easy platform lifting and lowering at the touch of a button. Scissor lift mechanism – provides stable platform guidance under load. Safety limit switches – control the maximum lifting height and enhance operational safety. Safety toe guard – protects the area beneath the platform during lowering. Net weight of 260 kg – contributes to increased stability when handling heavy loads. Manufacturing Facilities Feeding heavy components to machines, assembly lines, and machining stations. Positioning materials at ergonomic working heights. Industrial Warehouses Lifting pallets, containers, crates, bulk goods, and materials for further transport. Improving workflow efficiency and reducing manual handling. Workshops and Technical Service Centers Handling machine parts, molds, tools, assemblies, and steel components. Supporting maintenance and repair operations. Logistics Centers Assisting with order picking, sorting, shipment preparation, and load inspection. Facilitating efficient material flow. Loading and Unloading Areas Positioning heavy goods at the required working level for safer handling. Quality Control Departments Raising components to a comfortable inspection height for measurement, testing, or further processing. Production and Technological Lines Positioning materials and components at the optimal operating height for operators and machinery. Technical Specifications Parameter Value Maximum Load Capacity 2000 kg Minimum Height 230 mm Maximum Height 1000 mm Platform Length 1300 mm Platform Width 850 mm Lifting Motor Power 1.5 kW Hsdpfsw Rl Rnox Abkjfn Weight 260 kg Power Supply 400 V UDT Inspection Required Yes

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK DC3000 Cyclone Dust Collector – Advanced Sawdust and Dust Extraction System The CORMAK DC3000 is an advanced cyclone dust extraction system designed for intensive dust collection processes in woodworking, furniture manufacturing, and metalworking industries. Thanks to its modern cyclone separator, powerful centrifugal sawdust fan, and dual filtration system, the unit efficiently removes both coarse and fine dust particles from the air. The DC3000 sawdust extractor is equipped with an automatic filter cleaning system, ensuring consistent performance and reduced maintenance requirements. Key advantages Automatic filter cleaning system – maintains constant extraction efficiency and reduces downtime. Cyclone separator – effectively separates larger dust particles before they reach the main filter. High-performance centrifugal fan – provides strong suction with low operating noise. Dual filtration system – suitable for both dry and damp sawdust applications. Compact and mobile design – equipped with a durable metal waste container for convenient operation. Precision sealing system – airtight connections ensure high vacuum performance. Construction and technology The CORMAK DC3000 is equipped with a powerful 3 kW three-phase motor (400 V) operating at 2,800 rpm. The centrifugal fan generates high vacuum pressure, enabling efficient extraction even from multiple suction points. An integrated pressure gauge allows real-time monitoring of filter condition and system performance. The cyclone separator reduces the load on the main filter by removing heavier particles before filtration, extending filter life and improving overall efficiency. Precision and performance The cyclone separation system effectively removes larger contaminants, significantly reducing filter clogging. With an extraction capacity of up to 7,000 m³/h, the DC3000 provides efficient operation in multi-point extraction systems and high-dust environments. The combination of two collection containers and four transport wheels improves functionality, mobility, and ease of operation in industrial environments. Applications The CORMAK DC3000 dust extraction system is suitable for: woodworking plants and sawmills furniture manufacturing and flooring industries workshops processing soft metals building material warehouses with high dust levels Standard equipment Automatic filter shaker system Hsdjwwtz Nspfx Abkjfn Pressure gauge Dual filtration system (pre-filter and main filter) Metal container under the cyclone separator Transport wheels Optional equipment Additional suction outlets with different diameters Pipe distribution systems for workshop-wide extraction networks Protective filter covers Technical specifications Parameter Value Extraction capacity 2,000 – 7,000 m³/h Noise level 75 dB Fan speed 2,800 rpm Suction connections 3 × Ø100 mm / 1 × Ø200 mm Number of containers 2 Motor power 3 kW / 400 V Dimensions (L × W × H) 1300 × 1000 × 2200 mm Weight 219 kg

Year of construction: 2026, condition: new, Screening machine | Oscillating screen type ASM-550 Demonstration machine - Make: S&F GmbH - Type: ASM-550 - Screening capacity: approx. 60 - 70 m³/h (for wood chips and sawdust) - Screening area: 5.4 m² - Fractions: 3 or 4 pieces - Screen decks: 3 pieces - Drive power: 4.0 kW - Machine weight: approx. 3,800 kg - Machine colour: RAL 6011 Reseda green - Screen inserts and material outlet freely selectable Hsdjxtfv Iepfx Abkofn Suitable for screening the following bulk materials, among others: - Wood chips and wood shavings - Sawdust and sawdust - biomass - Wood pellets - charcoal - Waste wood - Bark Vibrating screen | Wood chip screen | Vibrating screen machine | Flat screen | Vibrating screen | Roll sifter | Screening machine for wood chips

Condition: new, Year of construction: 2026, Tilting and Swiveling Machine Vice 160 mm QHK160 – Precise Positioning and High Clamping Force The QHK series machine vices are specialized solutions designed for demanding machining operations where both strong workpiece clamping and precise angular positioning are essential. The QHK160 model, featuring 160 mm wide jaws, is a tilting and swiveling machine vice ideal for use with bench drills, milling machines, grinders, and planers. Its design allows the workpiece to be rotated and tilted, making it a versatile tool for production workshops, tool rooms, and maintenance departments. Main advantages of the machine Adjustable tilting angle – enables precise workpiece positioning in multiple planes without the need to reposition the machine tool. 360° swivel base – equipped with a 1° graduation scale for accurate alignment with the cutting tool. High clamping force of 3000 kg – ensures stability and safety even during intensive machining operations. Robust cast iron construction – resistant to vibrations and deformation during heavy-duty work. Protected lead screw – prevents contamination from chips and debris, increasing the durability and reliability of the clamping mechanism. Construction and technology The QHK160 machine vice is manufactured from high-quality cast iron, providing excellent rigidity and structural stability. The integrated body and movable jaw minimize deflection, ensuring repeatable workpiece positioning. The swivel base with a precision scale and the tilting cradle mechanism allow simultaneous angular adjustment in two axes – horizontal and vertical. Thanks to this design, the QHK160 is an excellent solution for applications requiring multi-stage machining and changing tool approach angles. Precision and work efficiency The tilting and swiveling functions allow accurate workpiece positioning without the need for repeated clamping. This significantly reduces setup time and increases workstation efficiency. Combined with a high clamping force of 3000 kg, the QHK160 provides secure and stable holding of the workpiece regardless of its shape and machining requirements. Applications The QHK160 machine vice is an excellent choice for professional industrial users who require flexible and durable workpiece clamping. It is ideal as: Bench drill vice – enables precise drilling of angled holes. Milling machine vice – provides stability during complex machining operations. Grinding machine vice – suitable for grinding inclined, curved, and angular surfaces. Universal workshop tool – for tool rooms, maintenance departments, and production workshops. Standard equipment Cast iron machine vice with tilting and swiveling base 360° swivel scale with 1° graduation Lead screw protection against contamination and chips Technical specifications – QHK160 Machine Vice Hedpfevxgkzox Abkofn Parameter Value Jaw width 160 mm Maximum clamping force 3000 kg Swivel range 360° Swivel scale graduation 1° Construction material High-quality cast iron Type Tilting and swiveling machine vice

Condition: new, Year of construction: 2026, Machine Vice F 160 – Double-Sided Design for Professional Metalworking Applications The F 160 machine vice is a double-sided construction designed for professional use in metalworking workshops, CNC machining centres, and bench drilling applications. Thanks to its well-thought-out design and high-quality materials, it provides precise clamping of long workpieces. It is an indispensable tool wherever stability, even force distribution, and the ability to handle workpieces with unusual geometries are essential. Main advantages of the F 160 machine vice High clamping force up to 3000 kg – ensures safe and stable workpiece holding during intensive machining operations. Double-sided construction – allows long workpieces to be clamped while utilising the full length of the machine table. High-quality cast iron body and jaws – provide resistance to deformation and long service life under industrial conditions. Induction-hardened and ground jaw inserts – ensure accurate and repeatable clamping. Thrust bearing – significantly improves the efficiency of the clamping mechanism. Design and technology The F 160 machine vice is manufactured from precision-machined cast iron, providing excellent rigidity and vibration resistance during machining. The movable jaw operates smoothly thanks to the integrated thrust bearing, which improves force transmission while reducing the effort required from the operator. Replaceable jaw inserts allow quick and cost-effective restoration of full functionality after wear. Precision and work efficiency The F 160 vice enables accurate and uniform clamping of workpieces thanks to its double-sided structure, which is particularly important when machining large components. Precise jaw geometry and a stable base directly contribute to high machining quality and repeatable production processes. Applications Hfodpfx Abevxgq Usken The F 160 machine vice is designed for: Bench drills, milling machines, and conventional lathes CNC machining centres Toolrooms and single-piece production environments Machining of long workpieces, pipes, profiles, and irregularly shaped components Standard equipment Crank handle for operating the clamping mechanism Locating keys for accurate positioning on the machine table

Condition: new, Year of construction: 2026, Precision Machine Vice 125 mm QM16125N – Maximum Rigidity and Accuracy for Demanding Applications Machine vices are an essential part of the equipment in every modern toolroom and production facility. The QM16125N 125 mm precision machine vice is a high-quality clamping tool designed for precise workpiece holding during drilling, milling, and other machining operations. Its robust construction, extended jaw opening range, and compatibility with bench drills and CNC machines make it a versatile solution for demanding industrial applications. Main advantages of the QM16125N machine vice High-quality cast iron body – the base with a hardness of approximately 40 HRC ensures excellent durability and effective vibration damping. Hardened steel jaws with a hardness of 48–52 HRC – provide secure and long-lasting workpiece clamping even during intensive machining. Adjustable jaw insert positioning – increases the working range and flexibility of clamping. Precision-designed movable jaw – provides additional downward clamping force, preventing unwanted workpiece lifting or loosening. Hfsdpfx Aovxgugsbken Base height tolerance of ±0.015 mm – demonstrates extremely high manufacturing accuracy. Possibility of using multiple vices together – an ideal solution for securing larger components or multi-station machining operations. Design and manufacturing technology The QM16125N machine vice has been designed with stability, durability, and repeatability in mind. High-quality materials and precise manufacturing ensure that this model meets the requirements of modern single-piece and series production. The wide jaw opening range (up to 305 mm) makes it a flexible solution suitable for clamping workpieces of various sizes. Precision and work efficiency Thanks to the accurate machining of all components, the QM16125N enables repeatable workpiece clamping without the need for additional positioning adjustments. The minimal base tolerance ensures machining accuracy, which is essential during precision milling and drilling operations. The vice is perfectly suited for use with milling machines, CNC machining centres, and bench drills, providing reliable performance in demanding production environments. Applications The QM16125N is designed for industrial plants, toolrooms, prototype workshops, and service departments requiring a reliable workholding solution. It is ideal as: A machine vice for CNC milling machines – suitable for both series and individual machining operations. A workshop vice for machining centres – providing versatile clamping capabilities for various applications. Standard equipment Jaw inserts with adjustable positioning capability Precision-made steel movable jaw High-strength cast iron base Lead screw with hexagonal head Technical specifications – QM16125N precision machine vice Parameter Value Jaw width 125 mm Jaw height 38 mm Maximum jaw opening L1 112 mm Maximum jaw opening L2 165 mm Maximum jaw opening L3 250 mm Maximum jaw opening L4 305 mm Transverse key width 14 mm Longitudinal key width 14 mm Hexagonal screw shaft head 14 mm Dimensions 338 × 126 × 106 mm Weight 16 kg

Condition: new, Year of construction: 2026, Product characteristics The plasma burner or oxygen-gas CNC1 burner is a mobile device designed for cutting shapes out of a metal sheet. The machine does not require anchoring, thus reducing the assembly time considerably. Additionally, it enables for placing the machine in any location within the hall without any new expenses. The machine is equipped with an excellent quality wheel system that together with the low weight portal makes the plotter one of the fastest machines available on the market. The machine can be used for manual and automatic cutting. It is equipped with a digital controller that enables cutting out complicated shapes. The machine proves itself very well in the shipbuilding, machine-building and power industry. CNC1 has been equipped with a precise system of X/Y axes guides. The burner is controlled by Sino-USA electronic production system that is characterized by a high precision and elimination of the errors occurring during operation. The machine is very easy to configure. A manual configuration is possible for simple shapes and automatic configuration is possible for more complicated figures. The cutting pattern and the burner motion are shown on a display. An original FastCAM software is attached to the machine for easy configuration. The software is in English which makes the work easier. FastCAM is a technological CAD/CAM program, which is intended for designing and defining cutting paths of the elements cut out by CNC burning machines. The program shall be installed on an office PC or on a portable computer. After defining the way of cutting the operator receives a ready control code, which should be transferred to the control system of the machine. FastCAM program is a standard element of our machines. BASIC INFORMATION Hfsdevxhwvjpfx Abken User-friendly interface – easy operation, even for people without prior experience of working with such programs as FastCAM Import of drawings in the *.txt format from any programs similar to e.g. AutoCAD, SolidWorks etc. MAKRO – a library containing standard shapes enables creating figures without the necessity of drawing them in CAD system. The program provides 2D figures NESTING – an optimal usage of sheet metal thanks to the automatic arrangement of elements on a sheet DEMO – shows a working path without having to turn on the plasma source or oxygen VOLTAGE HEIGHT CONTROLLER The machine is equipped with THC (a voltage control of the plasma burner blowtorch height). A precise control (+/- 0.1 mm) of the plasma blowtorch distance from a sheet metal during cutting. Higher accuracy and absence of defects which capacitive sensors and roller disks have. The parameters of the controller are collected automatically from the Automatic Cutting Parameters Selection table. Technical data Power supply 230 V LCD 7" color Code format G-Code Working dimensions 1500×3000 mm Cutting speed 50–3000 mm/min Illustrations are preview only, the device is sold without the table. Manufacturer: Cormak

Condition: new, Year of construction: 2026, CORMAK PT410 Planer Thicknesser – Professional Woodworking Machine The CORMAK PT410 planer thicknesser is a high-performance woodworking machine designed for professional applications in carpentry workshops, furniture factories, and industrial production facilities. The applied technical solutions ensure exceptional precision, stability, and operator comfort during both surface planing and thicknessing operations. The PT410 model offers an impressive 410 mm working width and a powerful 5.2 kW (S6) motor, meeting the requirements of the most demanding users. Main advantages of the machine Heavy-duty, robust construction – a 330 kg machine weight and cast iron working tables eliminate vibrations, ensuring stable operation even when processing large wooden elements. S6: 5.2 kW motor (S1: 4.0 kW) – high motor power enables smooth machining of hard wood species and intensive operation without the risk of overload. Working width up to 410 mm – ideal for processing wide panels, beams, countertops, and furniture boards. Quick change between operating modes – eccentric locking mechanisms allow switching from planer mode to thicknesser mode within seconds. Aluminium fence with angle scale – precise adjustment from 90° to 45° enables machining of angled and bevelled elements. Central thicknessing table lifting system – ensures uniform material guidance without tilting or uneven thickness. Construction and technology The CORMAK PT410 planer thicknesser is built on a heavy welded frame with precision-ground cast iron tables. The 1660 mm long planer tables provide excellent material support and accurate feeding. The cutter block rotates at 5500 rpm and is equipped with three precisely adjusted HSS knives measuring 410 × 25 × 3 mm, allowing smooth and high-quality surfaces after a single pass. The 120 mm dust extraction outlet ensures efficient chip removal, which is essential during continuous operation. Precision and working efficiency The PT410 allows machining materials with a height range of 5–225 mm and provides a maximum cutting depth of 3.5 mm in thicknessing mode. The 7 m/min feed speed enables fast and efficient processing of large quantities of wood. Thanks to the accurate height scale and ergonomically positioned adjustment wheel on the right side of the machine, the operator has full control over machining parameters. Hfsdpfx Ajvxh T Djbksn Standard equipment Three HSS knives, dimensions: 410 × 25 × 3 mm Cast iron planer tables (1660 × 410 mm) Cutter head guard Feed stop switch and emergency STOP switch Ø120 mm dust extraction outlet Polish-language operating manual (DTR) CE Declaration of Conformity Technical specifications Parameter Specification Cutter block diameter 75 mm Cutter block speed 5500 rpm Dust extraction outlet diameter 120 mm Tilting angle of fence 90°–45° Number of knives / dimensions 3 / 410 × 25 × 3 mm Maximum planing width 410 mm Maximum thicknessing width 408 mm Maximum thicknessing height 5–225 mm Maximum thicknessing cutting depth 3.5 mm Maximum planing cutting depth 4 mm Thicknessing feed speed 7 m/min Planer table dimensions 1660 × 410 mm Thicknessing table dimensions 600 × 408 mm Gross weight 330 kg Machine dimensions (L/W/H) 1640 / 920 / 1000 mm Motor speed 2800 rpm Motor power S1/S6 S1: 4.0 kW / S6: 5.2 kW Power supply 3-phase, 400 V Operating manual (DTR) Yes CE Declaration Yes

Condition: new, Year of construction: 2026, Transport Roller Set WL3 + WF3 – Professional Solution for Moving Heavy Loads The WL3 transport roller set together with the WF3 support trolley is an advanced solution designed for moving heavy loads weighing up to 6 tons in warehouses, industrial plants, and workshops. The construction of the set ensures even load distribution, high stability, and full operational safety even during intensive use. Safe transport thanks to a durable construction The WL3 transport unit is equipped with 4 polyurethane rollers that ensure smooth movement and vibration absorption. Thanks to the PU tread, it allows safe transport without the risk of damaging the floor surface. The WF3 support trolley stabilizes the load, increasing safety and preventing tilting during movement. The entire set is made of durable and wear-resistant materials, ensuring long service life. Complete set – ideal for industrial applications The WL3 + WF3 set combines high load capacity and durability with ease of operation. Thanks to carefully selected dimensions and practical features, such as adjustable trolley spacing and a transport handle, it enables quick and efficient movement of machines, steel structures, and other large-scale loads. Main advantages of the WL3 + WF3 set: Static load capacity: 6000 kg (3000 kg per each element) Polyurethane tread – quiet and safe transport High stability thanks to optimized support point distribution Adjustable WF3 trolley width: from 50 to 1100 mm Quick operation and easy loading thanks to compact dimensions Technical specifications – WL3 Parameter Value Static load capacity 3000 kg Dynamic load capacity 1800 kg Roller size Ø80 x 70 mm Number of rollers 4 Loading height 110 mm Load-bearing surface per element Ø110 mm Support points 1 Handle length 900 mm Dimensions (L x W) 330 x 420 mm Technical specifications – WF3 Parameter Value Static load capacity 3000 kg Dynamic load capacity 1800 kg Roller size Ø80 x 70 mm Number of rollers 4 Loading height 110 mm Hedjvxrauepfx Abkefn Load-bearing surface per element 180 x 110 mm Support points 2 Connecting bar length 860 mm Trolley spacing width 50–1100 mm

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK GF1500 PROFESSIONAL CHAIN TRENCHER – POWER, PRECISION AND PRODUCTIVITY The CORMAK GF1500 Chain Trencher is a professional machine designed for digging narrow trenches for cables, pipes, irrigation systems, water supply lines, drainage systems, and other underground utilities. Thanks to its precision, high working speed, and compact dimensions, it can easily operate close to fences, buildings, and other obstacles, even in confined areas with very hard or compacted soil. Key Features and Advantages Powerful 15 HP engine – delivers high cutting chain traction for efficient operation in hard and compacted ground. Precise trench dimensions – digging depth up to 600 mm with a trench width of 100 mm. Heavy-duty cutting system – the chain is equipped with 27 carbide-tipped teeth, allowing it to cut through roots and small stones with ease. Excellent manoeuvrability – the balanced design and compact dimensions make the machine easy to operate in narrow gateways, gardens, and confined working areas. Heavy-duty industrial frame – manufactured from thick-walled steel profiles with a durable powder-coated finish for maximum resistance to mechanical damage and corrosion. Operator safety – equipped with protective guards and ergonomically positioned controls for safe and comfortable operation. Applications It is specifically designed for creating straight, clean, and narrow trenches for: Electrical cables Fibre optic cables Water pipes Gas pipelines Drainage systems Irrigation installations Machine Specifications Specification Value Trenching Width 100 mm Trenching Depth 150 / 300 / 450 / 600 mm Number of Teeth 27 carbide-tipped teeth Chain Length 2,000 mm Maximum Chain Speed 550 m/min Tyres 145/70-6 Machine Height 1,100 mm Machine Length 2,100 mm Machine Width 720 mm Machine Weight Approx. 175 kg Engine Specifications Specification Value Engine Type 4-stroke OHV, air-cooled Engine Displacement 420 cm³ Rated Power 9.0 kW (12.24 HP) Maximum Engine Power (EPS*) 15 HP Starting System Manual recoil starter Cylinder Cast-iron sleeve Cylinder Bore 90 mm Stroke 60 mm Maximum Engine Speed 3,600 rpm Fuel Tank Capacity 6.5 L Engine Oil Capacity 1.1 L Dry Engine Weight 31 kg Engine Dimensions (L × W × H) 499 × 370 × 433 mm *EPS – Effective Power Solutions Engine Features OHV technology – provides optimum performance, longer engine life, and improved fuel efficiency. Lo-Tone PRO muffler – significantly reduces operating noise for quieter performance. Dual air filtration system – protects the engine from airborne contaminants, extending service life. Automatic governor – maintains stable engine speed and delivers consistent power under demanding working conditions. Cast-iron cylinder sleeve – improves durability, wear resistance, and oil control. Dual ball bearings – increase engine durability and extend service life. Float-type carburettor – ensures precise fuel delivery for easier starting and reduced fuel consumption. High torque output – delivers greater pulling power and improved digging performance. Hfodpfx Asvzqk Rebkon Protective spoil guard – shields the operator from excavated material thrown by the digging chain. The CORMAK GF1500 combines powerful performance, precision trenching, and robust construction, making it an ideal choice for demanding professional applications in construction, utilities, and landscaping.

Condition: new, Year of construction: 2026, Z7020 Vario Bench Drill Press for Metal – Solid, Compact and Precise Drilling Machine The Z7020 Vario metal bench drill press is a solid, compact and precise column drilling machine designed for locksmith workshops, tool rooms and production facilities. Thanks to stepless speed adjustment, an electronic speed display and a rigid construction, the machine ensures high-quality drilling performance across a wide range of metal materials. Main advantages of the machine Stepless spindle speed adjustment from 190–2700 rpm – allows optimal adjustment of operating parameters to the type of material being processed. Electronic speed display – provides precise control of drilling parameters. Laser pointer – facilitates hole positioning and improves drilling accuracy. Tilting worktable from -45° to +45° – enables angled drilling without repositioning the workpiece. Solid Ø70 mm column and heavy-duty base – ensure rigidity and stability during operation. 100 mm vice included – allows quick and secure clamping of workpieces. Work area lighting – improves comfort and safety when working in low-light conditions. Construction and technology The Z7020 Vario column drill press has been designed for long-term and reliable operation. The precisely machined spindle with an MK2 taper and a maximum spindle stroke of 120 mm provide a wide operating range. The rack-and-pinion table height adjustment system allows quick and accurate positioning of the work area. The machine’s cast iron construction reduces vibrations and improves machining quality. Precision and work efficiency Thanks to its rigid construction and optimized axis geometry, the Z7020 Vario metal bench drill press provides high drilling accuracy. The stepless speed adjustment allows perfect adaptation to the hardness and structure of the processed material, significantly extending tool life and increasing production efficiency. Applications The Z7020 Vario is a professional bench drill press suitable for: metalworking workshops, maintenance departments, production and service facilities, technical schools and training centres. It is ideal for both single-piece production and small-batch manufacturing wherever precision and repeatability of drilled holes are required. Standard equipment 100 mm machine vice Laser pointer LED work area lighting Three-arm spindle feed handle Electronic spindle speed indicator Drilling depth stop Technical specifications Hfjdpfxevzqrzs Abkon Parameter Value Maximum drilling diameter 20 mm Spindle speed range 190–2700 rpm Power supply 230 V Spindle taper MK2 Maximum spindle stroke 120 mm Spindle-to-column distance 170 mm Spindle-to-base distance 530 mm Table height adjustment range 380 mm Column diameter 70 mm Table dimensions 280 × 280 mm Base dimensions 480 × 290 mm Motor power 750 W Overall height 1120 mm Weight 66 kg

Condition: new, Year of construction: 2026, The DCV6000E is a technologically advanced industrial dust extraction unit designed for the efficient removal of sawdust, chips and dust from multiple workstations simultaneously. Designed for uninterrupted, intensive operation in production facilities, it provides constant suction performance and excellent air quality in the workshop. The reinforced construction and dynamically balanced impeller guarantee quiet, maintenance-free operation. Main Advantages of the Machine Very high performance – 6000 m³/h, ideal for operating with multiple machines simultaneously. 250 mm suction inlet diameter ensuring high airflow and compatibility with central extraction systems. 28 polyester filters with a filtration accuracy of 5 microns and a total filtration area of 14 m². Construction adapted for ceiling-mounted installation – space saving and the possibility of expanding the system. Hermetic bag replacement system – cleanliness and convenient operation. Energy-efficient operation thanks to optimized fan blades and high tightness of the suction system. Construction and Technology The extractor body is made of thick hardened steel, resistant to deformation and vibrations. The heart of the system is a metal impeller, dynamically balanced to reduce noise and ensure stability when operating with high airflow. Polyester filters with a large surface area and precise permeability retain dust particles with a size of up to 5 microns. The possibility of expanding the system with a HEPA filter means that the system meets the highest air quality standards. Precision and Work Efficiency The DCV6000E achieves a suction velocity of 28–32 m/s with a 3.8 kW motor operating at 3000 rpm. This allows it to efficiently handle multi-station woodworking lines and automated production systems, regardless of the intensity of the load. The unit guarantees stable parameters even during continuous operation. Application The DCV6000E woodworking dust extractor is used in furniture manufacturing plants, industrial woodworking shops, CNC production lines and wherever significant amounts of wood dust are generated. It works with: panel saws and sizing saws, wide-belt sanders, Hfsdpfx Asvzqxhobkjn edgebanders and planers, CNC machines for wood. Standard Equipment 28 dust filters (polyester, 5 microns) galvanized steel body metal impeller and suction housing hermetic bag containers Technical Specifications S1 motor power — 3.8 kW / 400 V, 50 Hz Motor speed — 3000 rpm Extraction capacity — 6000 m³/h Negative pressure — 3000 Pa Noise level — 80 dB Suction inlet diameter — 250 mm Suction velocity — 28–32 m/s Filter surface area — 14 m² Number of filters — 28 Filter material — Polyester, 5 microns / filter category "G" Dimensions (L × W × H) — 2000 × 625 × 2150 mm Weight — 262 kg The DCV6000E is a proven solution for the woodworking industry that combines reliability, energy efficiency and high filtration quality. Invest in a clean working environment and the safety of your production – contact our sales department to learn more about the available configuration options for the extraction system.

Condition: like new (used), Year of construction: 2017, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 20161259/2017, Filling system for all liquids. The system was used to fill disinfectant bottles. The system was put into operation in 2017 and is still as good as new, having only been in operation for a few hundred hours. Hfjdpfxevmnkrs Abken The article produced was only sold during Corona. It is also possible to purchase the complete product. Unfortunately there are only a few photos, but we would be happy to send you a video of the system in operation.

Condition: new, Year of construction: 2026, CORMAK LUP16 Log Splitter – Professional 16-Ton Vertical Hydraulic Wood Splitter The CORMAK LUP16 is a professional vertical hydraulic log splitter designed for intensive use in farms, sawmills, and wood processing facilities. Thanks to its robust construction, high operating performance, and a hydraulic cylinder generating 16 tons of splitting force, the machine easily handles large-diameter logs. This reliable hydraulic wood splitter combines efficiency with precise operation, making it an excellent solution for continuous-duty applications. Main advantages of the machine 16-ton splitting force – efficiently splits hard, wet, and seasoned wood with large diameters. Vertical working design – optimised for heavy logs and provides ergonomic operation. Hydraulic system with overload protection valve – protects the pump and hydraulic system against excessive loads. High-performance gear pump – ensures consistent oil flow and reliable long-term operation. Adjustable splitting speed – allows precise adjustment depending on the type of wood (from 4.6 to 14.2 cm/s). Log lifting system – makes positioning heavy logs under the wedge easier and reduces physical effort. Design and technology The CORMAK LUP16 splitter is built on a robust steel frame with increased resistance to deformation, while all working components are designed for continuous operation. The angled splitting wedge improves penetration into the wood, reducing the splitting cycle time. The machine is powered by a three-phase 4.5 kW (400 V) electric motor, providing sufficient power for intensive splitting of thick and hard wood. Hfedpfx Abjuqiq Dekjn Precision and work efficiency The LUP16 model allows processing logs up to 1100 mm in length and 700 mm in diameter, making it a versatile solution for a wide range of applications. The 948 mm wedge stroke ensures complete splitting in a single cycle. The adjustable splitting speed range of 4.6–14.2 cm/s and return speed of 6.2 cm/s allow the operator to optimise performance for maximum productivity. Applications The CORMAK LUP16 electric log splitter is designed for: Firewood production companies Municipal services and forestry operations Agricultural farms Professional individual users Woodworking workshops and processing plants The machine is suitable for various types of wood, from softwood species to hard deciduous timber, including both fresh and seasoned logs. Standard equipment Hydraulic gear pump Log lifting system Angled splitting wedge Overload protection valve 5-pin industrial power connector Optional equipment Four-way splitting wedge for dividing logs into four pieces Technical specifications Parameter Value Splitting force 16 tons Minimum log diameter 80 mm Maximum log diameter 700 mm Minimum log length 350 mm Maximum log length 1100 mm Splitting speed (continuously adjustable) 4.6–14.2 cm/s Return speed 6.2 cm/s Wedge stroke length 948 mm Motor power 4.5 kW Voltage 400 V Hydraulic tank capacity 18 l Hydraulic system pressure 27.7 MPa Dimensions 1050 × 1550 × 2500 mm Weight approx. 259 kg

Condition: new, Year of construction: 2026, CORMAK Z5020 Vario 230V Column Drill Press Hsdjwnca Aepfx Abkefn The CORMAK Z5020 Vario 230V column drill press is a modern metal drilling machine designed for professional workshop and industrial applications. Thanks to its stepless speed adjustment, wide machining capabilities, and rigid construction, it is perfectly suited for demanding drilling operations. Main advantages of the machine Stepless spindle speed adjustment from 180–2000 rpm – allows precise adaptation of drilling parameters to the type of material being processed. Solid 80 mm diameter column – high rigidity ensures stability during drilling operations. Tilting worktable from -45° to +45° – increases flexibility when machining workpieces at an angle. Drilling depth stop with scale – ensures repeatable and accurate hole depths. Built-in LED lamp – improves visibility of the working area. T-slots in the table and base – enable secure mounting of machine vices and fixtures. Construction and technology The CORMAK Z5020 Vario column drill press is manufactured using durable cast iron components, significantly increasing its service life and resistance to vibrations. The spindle with an MK3 taper and 150 mm stroke enables deep-hole drilling. The belt-driven transmission ensures reliable and quiet operation. The adjustable worktable, together with 600 mm height adjustment range, allows machining of workpieces with various dimensions. Precision and work efficiency The 1100 W motor (230 V / 50 Hz) combined with stepless spindle speed control enables efficient machining of a wide range of metal materials. Precise feed control and ergonomic operation ensure operator comfort even during extended working periods. With a maximum drilling capacity of 25 mm, the machine is a highly versatile solution for many applications. Applications The Z5020 Vario 230V metal column drill press is ideal for: locksmith workshops, manufacturing plants, maintenance departments, technical schools and training centers. Standard equipment LED work light Drilling depth stop Tilting worktable with T-slots Base with T-slots Stepless spindle speed adjustment Technical specifications Parameter Value Maximum drilling diameter 25 mm Maximum chuck capacity 16 mm Spindle axis to column distance 215 mm Spindle taper MK3 Spindle stroke 150 mm Column diameter 80 mm Motor 230 V / 50 Hz / 1100 W Gear transmission Yes Base dimensions 580 × 415 mm Table dimensions 356 × 356 mm Overall height 1710 mm Spindle speed range 180–2000 rpm Table height adjustment range 600 mm Transport dimensions 1510 × 690 × 256 mm Weight 95 kg

Condition: new, Factory-new agitated vessel with dissolver Type: STOC2200RWD Volume: approx. 2,266 liters Design: Vertical construction on three height-adjustable feet Hfjdpfx Absw Dy Hlekon Construction: Single-walled Medium-contacting material: 1.4301 stainless steel (AISI304) Surface: External satin finish, internal BA (IIId) Internal weld seams: Pickled, passivated and brushed Max. operating pressure: Atmospheric Max. operating temperature: 95°C Top: 15° conical top Bottom: 15° conical bottom with central outlet DN50 DIN11851 Tank dimensions: Tank diameter: 1,430 mm Cylinder height: 1,250 mm Total height: 2,160 mm Foot height: 500 mm Outlet to floor distance: 350 mm Equipment: 1x Ø 500 mm manway cover with swivel bracket on top, EPDM gasket 1x agitator flange connection IEC200 3x calotte / height-adjustable feet 1x stainless steel vent/bleeder valve DN50, non-pressurized, on the top 1x DN50 DIN11851 outlet port centered in the bottom 1x DN50 DIN11851 port with blanking cap on the top 1x DN65 DIN11851 port with blanking cap on the top 2x lifting lugs on the top 1x ladder bracket on the cylinder 1x nameplate Agitator: Dissolver Manufacturer: Schwarzer Rührtechnik GmbH Type: SRTDMK/7.5-1500 Power: 7.5 kW Speed: 1,410 RPM Operating voltage: 3PH 400V - Heavy-duty agitator shaft mounted to the agitator motor with muff coupling - Agitator shaft dynamically balanced for smooth running within the speed range - 1 piece dissolver disc Ø 275 mm screwed onto the end of the agitator shaft - Stainless steel flange with V-ring seal, EPDM - Motor mounted flexibly on neoprene rubber-metal buffers

Condition: new, Year of construction: 2026, CORMAK PT260 400V Planer Thicknesser – Compact Professional Woodworking Machine The CORMAK PT260 400V planer thicknesser is a modern, compact workshop-class machine designed for precise processing of sawn timber. This functional combination of a surface planer and thickness planer offers high efficiency, solid construction, and versatility when working with wood materials. Thanks to its robust design, ergonomic operation, and reliable performance, this woodworking machine is an excellent solution for carpentry workshops, technical laboratories, and professional home workshops. Main advantages of the machine S6: 2.6 kW motor – high torque reserve enables efficient machining of hardwood and long-term operation without overloads. Stable 170 kg construction – cast iron precision-ground tables and rubber vibration-damping feet ensure safe operation, reduced vibration, and high-quality cutting results. Quick mode change system – simple switching between surface planer and thickness planer functions improves efficiency during varied woodworking tasks. Three-knife cutter block – Ø75 mm shaft rotating at 4000 rpm provides a smooth surface finish and minimizes the need for additional sanding after planing. Wide adjustment range – smooth adjustment of the table and fence allows precise adaptation to different types and sizes of material. Construction and technology The CORMAK PT260 400V planer thicknesser is manufactured using high-quality steel and cast iron components. The working tables (1100 × 250 mm and 600 × 248 mm) are milled and ground, ensuring a perfectly flat surface for accurate material guidance. Hedpfx Aswt Axpobkofn The aluminium fence measuring 700 × 150 mm with adjustable angle from 90° to 45° allows easy machining of bevelled edges and angled surfaces. The thicknessing table is centrally guided on a rigid column, and height adjustment is carried out using a precise handwheel with a graduated scale, ensuring accurate and repeatable settings. Precision and working efficiency The CORMAK PT260 400V provides a maximum cutting depth of up to 3 mm, allowing effective removal of excess material while maintaining precise dimensional control. The 6 m/min feed speed ensures efficient operation while maintaining excellent surface quality. The Ø100 mm dust extraction outlet enables effective connection to a chip extraction system, improving operator comfort and extending the service life of cutting tools. Standard equipment Ø75 mm cutter shaft with 3 knives 250 × 30 × 3 mm Surface planer table: 1100 × 250 mm Thicknessing table: 600 × 248 mm Adjustable aluminium fence 700 × 150 mm (90°–45°) Rubber vibration-damping feet Ø100 mm dust extraction outlet Operating manual (DTR) CE Declaration of Conformity Technical specifications Parameter Specification Cutter block diameter 75 mm Cutter block speed 4000 rpm Dust extraction outlet diameter 100 mm Fence tilt angle 90°–45° Number of knives 3 Knife dimensions 250 × 30 × 3 mm Surface planer table dimensions 1100 × 250 mm Thicknessing table dimensions 600 × 248 mm Maximum planing width 250 mm Maximum planing depth 5 mm Maximum thicknessing cutting depth 3 mm Maximum thicknessing height 180 mm Thicknessing feed speed 6 m/min Fence dimensions 700 × 150 mm Machine dimensions (L × W) 1100 × 250 mm Weight 170 kg Motor power S1/S6 S1: 2.0 kW / S6: 2.6 kW Power supply 400 V Operating manual (DTR) Yes CE Declaration Yes

Condition: new, Year of construction: 2026, CORMAK PT265 230V Planer Thicknesser – Advanced Compact Woodworking Machine The CORMAK PT265 230V planer thicknesser in its new version is a technologically advanced woodworking machine designed for users who require precision, efficiency, and a compact design with single-phase power supply. This multifunctional machine combines the functions of a surface planer and thickness planer, offering improved machining accuracy thanks to an innovative synchronized table system. It is a professional solution for craft workshops, carpentry shops, and demanding hobby users working with both hardwood and softwood. Main advantages of the machine New integrated working table system – simultaneous adjustment of the infeed and outfeed tables eliminates the need for separate calibration and improves machining accuracy. Stable and heavy-duty construction – a 170 kg machine weight and wide cast iron working tables reduce vibrations and increase operator safety. Powerful 2.6 kW (S6) motor – additional power reserve enables efficient processing of demanding and hard wood species. Quick function conversion – easy switching from surface planer mode to thickness planer mode thanks to a simple table lifting and dust extraction cover system. 230V power supply – allows operation in workshops without access to a three-phase electrical installation. Construction and technology The CORMAK PT265 planer thicknesser is equipped with a modernized working table system operating synchronously and maintaining the set working plane. This eliminates common problems found in older machine designs, such as level differences between tables that may cause machining inaccuracies. The three-knife cutter block with a 75 mm diameter, rotating at 4000 rpm, ensures excellent surface quality and precise material processing. The 700 × 150 mm aluminium fence with angle scale allows accurate adjustment from 90° to 45°, increasing the versatility of the machine for various woodworking applications. Precision and working efficiency Thanks to precise height adjustment with a clear graduated scale and the centrally mounted thicknessing table on a rigid column, the CORMAK PT265 wood planer thicknesser provides stable and repeatable operation. The machine offers a maximum cutting depth of 3 mm and a feed speed of 6 m/min, allowing fast and efficient processing. Standard equipment Ø75 mm cutter block with three knives Modern synchronized cast iron working tables, precision-ground Aluminium guide fence 700 × 150 mm with angle scale Ø100 mm dust extraction outlet for chip extraction connection Quick conversion system between surface planer and thickness planer functions Operating manual (DTR) Hfjdpfewu T S Ajx Abken CE Declaration of Conformity Technical specifications Cutter block diameter 75 mm Cutter block speed 4000 rpm Dust extraction outlet diameter 100 mm Fence tilt angle 90°–45° Number of knives 3 Cutter block length 262 mm Knife dimensions 250 × 25 × 3 mm Maximum planing width 265 mm Maximum thicknessing width 265 mm Maximum thicknessing height 180 mm Maximum thicknessing cutting depth 3 mm Maximum surface planing cutting depth 2.5 mm Thicknessing feed speed 6 m/min Fence dimensions 700 × 150 mm Machine dimensions (L × W × H) 1080 × 269 × 1000 mm Weight 170 kg Motor power S6: 2.6 kW Power supply 230 V Operating manual (DTR) Yes CE Declaration Yes

Condition: new, Year of construction: 2026, CORMAK ZX7016 is a versatile drilling and milling machine that combines compact dimensions with impressive functionality. Designed to meet the requirements of DIY enthusiasts, it is perfectly suited for precision metalworking. Thanks to the MK2 spindle taper, the machine provides exceptional stability and accuracy during operation. Additionally, the digital readout of the spindle quill extension allows full control over the process, resulting in repeatable and precise results — both in a home workshop and when supporting production processes. The machine has been manufactured in accordance with applicable European Union standards and is CE marked and supplied with an EC Declaration of Conformity. The control panel and safety systems comply with current occupational health and safety requirements. The spindle and gear cover is equipped with a microswitch, providing additional safety during operation. KEY ADVANTAGES OF THE MACHINE: Digital readout of drilling/milling depth Built-in workshop light integrated into the machine body Durable and professional construction ensuring a long service life Multifunctionality: drilling and milling capabilities in one machine Drive transmission via a reliable belt drive Spindle mounted on precision ball bearings Adjustable spindle height for different applications Through spindle with a thread for mounting work heads IP54-rated safety switch for enhanced user safety Quiet and efficient electric motor ensuring comfortable operation ✔ All mechanical components, including pulleys, are made entirely of metal for maximum durability and reliability Hedpfx Abjwvhmwekjfn ORIGINAL ZX7016 – PRECISION AND STABILITY AS STANDARD The machine is equipped with a solid, heavy-duty cross table, ensuring smooth and precise movement along two axes (X/Y), allowing accurate control of the machining process. A vice can be mounted directly onto the worktable (vice available as optional equipment). The cross worktable is an integral part of the machine's construction, ensuring rigidity and reliability during operation. Technical Specifications: Specification Value Max. drilling diameter 16 mm Max. vertical milling diameter 12 mm Max. face milling width 40 mm Motor S1/S6 0.55 kW / 0.75 kW Motor speed 1420 rpm Voltage / frequency 230 V / 50 Hz Table dimensions (L × W) 420 × 152 mm Table travel along Y-axis 115 mm Table travel along X-axis 230 mm Distance from column to spindle 180 mm Spindle nose height above table 155–355 mm Spindle quill travel 77 mm Spindle taper MK2 Spindle speeds 320, 400, 500, 650, 800, 900, 1350, 1450, 1800, 1900, 2700, 3300 rpm T-slot width and spacing 12 × 80 mm Weight 75 kg Note: The operating parameters provided are for reference only and may vary depending on the type of material being machined, the tool used, and its technical condition (e.g. degree of wear or bluntness). Standard Equipment Drill chuck 1–16 mm Drill chuck arbor Cross worktable Basic hand tools DTR / operating manual

Condition: new, Year of construction: 2026, Make: S&F GmbH Type: MFB-500/5 Belt width: 500 mm Centre distance (A-A): 5,000 mm Conveying capacity: approx. 30 - 40 m³/h (at 0 ° incline) Drive: worm gear motor Motor power: 1.5 kW, 400 V, 50 Hz Belt speed: approx. 1.1 m/s Drive drum: Drum diameter 220 mm Tensioning drum: Drum diameter 220 mm with spindle tensioning station Hsdpfjw Ad Rrox Abkofn Belt: EP 250/2 2:1 rubber inclined conveyor belt with V-profile (15 mm) Machine weight: approx. 450 kg Machine colour: RAL 6009 Fir green Suitable for the following bulk materials, among others: Wood chips, sawdust and sawdust, biomass, wood pellets, charcoal, waste wood, bark, soil, humus, recycling material, cross-cuts and much more. Accessories (optional): Feed hopper (filling hopper), inner belt scraper, chassis, tow bar, steel support, electrical installation (16 A plug-in switch) Troughed conveyor belt | troughed belt conveyor | conveyor belt | bulk material conveyor | belt conveyor | inclined conveyor belt

Condition: new, Year of construction: 2026, PREMIUM models feature high rigidity and maximum resolution precision, operating in full interpolation across the X, Y, and Z axes. A high-quality CNC milling router designed for subtractive machining, suitable for numerous industries such as industrial, electronic, welding, woodworking, and advertising. These are efficient and precise machines equipped with user-friendly CNC control systems. Optionally – latest UCanCAM V13 software. Technical parameters Spindle 5.5kW / 18,000 rpm inverter, air-cooled Working area 1500x3000 mm Maximum spindle height 350 mm Control DSP Software resolution 0.001 mm Power supply 400V Weight 1380 kg Machine dimensions 2450 x 3800 x 2200 mm Table height 715 mm Vacuum pump 5.5 kW (optional) Vacuum pressure 440 mbar Guideways linear Drive transmission rack and pinion (Z axis – ball screw) Axis drives hybrid servo drives Software UCanCAM V13 (option) Equipment Air-cooled spindle, PREMIUM version Hybrid servo drives Raised Z-axis gantry – 350 mm Vacuum table – 4 independent vacuum zones + T-slot table for manual fixing Tool height sensor included Tool set, collets, levelling feet, and accessories DSP control – digital signal processing Starter milling cutter set Hsdpfxeycupws Abkefn Unloading and machine placement are the customer’s responsibility. Power plug on the customer’s side due to various 16A / 32A sockets. On-site commissioning of CNC routers available upon request, with individual pricing.

Condition: new, Year of construction: 2026, Cross splitting wedge for 16-ton log splitters Hfsdpfxeycu T Ae Abksn Allows logs to be split into 4 parts. It features a universal mounting system compatible with most wood log splitters available on the market. Thanks to its universal mounting design, it fits the majority of commercially available log splitters. Manufacturer: Cormak