Scrubber drier

Kärcher B200 R Dose Bp Pack D90

Condition: used, Year of construction: 1994, turning diameter 570 mm turning length 2000 mm control Sinumerik 805 Siemens swing diameter over face slide 365 mm main spindle speeds: 3-2.500 U/min drive of main spindle 15/19 kW Kdsdpfx Aju Sbkgjc Nsw spindle bore 62 mm spindle head DIN 55027 No.8 tailstock taper MT 5 quill stroke 190 mm pinole diameter 80 mm feed range - long. and cross 0,01-50 mm/u total power requirement 50 KVA weight of the machine ca. 5 t dimensions of the machine ca. m

Condition: new, ELMAG INDUSTRIE 1000/230 HD Universal center lathe 88173 incl. RÖHM lathe chuck incl. 3-axis position indicator incl. quick-change steel holder 'Set', Multifix system Ready for operation: incl. oil filling, de-preserved (degreased), completely assembled and test run carried out Heavy lead and feed spindle lathes, 5,500 watts: The quality of the INDUSTRIE 230 HD models becomes clear as soon as you switch them on: barely audible drive noise. No vibrations at large cutting depths. In fact, at 2,635, 2,835 and 3,055 kg, the 230 HD models are the heaviest in their class and, thanks to their extremely robust design - e.g. high-frequency hardened prismatic guides - are ideally suited for heavy-duty and continuous operation. At 80 mm, the 230 HD offers an extra-large spindle bore for processing bar stock up to 2 1/2 inches in diameter (76.1 mm). A turning size via slides of Ø 290 x 1,000, 1,500 or 2,000 mm and a maximum turning diameter of 460 or 700 mm leave almost nothing to be desired for machine, steel, plant and tool construction - as well as 12 speeds for 170 longitudinal and cross feeds and 150 leadscrew pitches for metric and inch threads. Standard equipment: - including digital position indicator - RÖHM three-jaw lathe chuck Ø 250 mm - Four-jaw faceplate chuck Ø 315 mm - Clamping disk Ø 350 mm - 2 fixed centers - Rotating center point MK 5 - Moving steady rest - Steady rest - Quick-change steel holder set, 5-piece MB - Thread gauge - Halogen machine lamp - Emergency stop button / zero voltage release - Rotating chuck guard with safety switch - Underframe / chip tray / splashback - Tool kit / operating instructions / CE Special accessories: - Insert turning tool set 25 x 25 mm, 7-piece - 7-piece insert set for turning tool set 25 x 25 mm - Turning tool set 'Camlock' 25 x 25 mm, 7-piece - Cut-off tool holder 25 x 25 mm, length 150 mm - Cutter for cut-off tool holder 25 x 25 mm ADVANTAGES: - 'CE' compliant machines with maximum safety and machine accuracy in accordance with DIN Ksdpfstw Dxkjx Ac Nedw - Powerful and robust for trade & industry - Coolant tank and pump integrated in the machine base TECHNICAL DATA: Center width 1000 mm Center height 230 mm Turning diameter over bed 460 mm Turning diameter over slide 290 mm Turning diameter without bridge 700 mm Machine bed width 340 mm Bridge length 200 mm Cross slide travel 280 mm Top slide travel 100 mm Turning tool cross-section, max. 25x25 mm Lathe chuck holder D1 - 8 Spindle holder (turning spindle) MK 7 mm Spindle bore 80 mm Speed 25 - 1800 rpm Speed steps 12 Longitudinal feeds (170) 0.04 - 2.46 mm/rev Transverse feeds (170) 0.02 - 1.23 mm/rev Metric thread dimension (24) 0.5 - 20 mm metric modular thread (20) 0.25 - 10 mm Inch thread, threads G (61) 1-5 / 8 - 72 G/' Inch modular thread, threads G (45) 3-1 / 4 -96 G/' Lead screw pitch 6 mm Lead screw diameter 40 mm Quill holder MK 5 Quill diameter 75 mm Quill travel 130 mm Motor power 5500 W Coolant pump 40 W Mains connection 400/50 V/Hz Length (total) 2310 mm Height (total) 1255 mm Weight 2635 kg

Condition: new, empty load weight: 1,300 kg, maximum load weight: 950 kg, loading space length: 3,010 mm, loading space width: 1,530 mm, loading space height: 350 mm, tire size: 165R13C, Car trailer braked and with 100km/h from trailer manufacturer STEMA type SyStema ST O2 13-30-15.1. The open box trailer is ideal for private transportation or commercial use. Garden waste, small furniture and motorcycle transport for up to 3 motorcycles is possible thanks to the removable side walls. As standard equipment, the steel trailer has a 100 km/h approval, front and rear flap, support wheel, eight lashing eyes, high-quality locks, removable galvalum galvanized drop sides and a V-drawbar. The complete equipment list and technical details can be found below. This trailer is also available in different versions, for example as a tarpaulin trailer. Kdodpferx S Dpex Ac Now We also offer car trailer accessories such as attachments, high tarpaulin, flat tarpaulin, drawbar box and rear supports, ramp rail, stand rail, motorcycle rocker, motorcycle lashing straps, lashing straps.

Condition: good (used), Year of construction: 1988, machine/vehicle number: 251500126, Offer 24156 Technical data: - Drilling capacity in steel ST 60 18 mm - Drill spindle mount MK 2 - Drill spindle stroke 100 mm - Drill spindle speeds approx. 340 - 2400 rpm - Right and left rotation - Projection 250 mm - Max. distance table - drill spindle 670 mm - Table with 2 T-slots 320 x 280 mm Kdedpfx Aovxhdcjc Njw - Height adjustable via rack with hand crank - Drive 400 V / 0.75 kW - Space requirement approx. W 500 x H 1750 x D 750 mm - Weight approx. 180 kg - with: - Keyless drill chuck