Used Bode 2Vp10 for sale (248)

Condition: new, mileage: 100 km, power: 390 kW (530.25 HP), fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, gearing type: automatic, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, 1. Cab & Interior * StreamSpace cab, 2.50 m, flat floor * Air-sprung cab suspension * Electro-hydraulic tilting system * Lower comfort bed + PremiumComfort mattress * Mattress topper * Drawers under bed & under console * Storage above windscreen, side compartments, rear luggage shelf * Velour seat covers (driver/passenger/centre seat) * Driver’s comfort air-suspended seat * Passenger multifunction seat * Leather steering wheel * StyleLine interior * Carpet covering on engine tunnel * Electric sunroof * Sound and heat insulation in cab Bedszv Dhnjpfx Aa Isln * Additional hot water heating system * Automatic climate control * Electric stationary air conditioning * Residual heat utilisation * Smoke detector + smoker’s package * Side sun blinds * Curtain across bed area * Refrigerator in drawer * Notebook holder 2. Engine & Drivetrain * OM471, inline 6, 12.8 L, 390 kW (530 HP), 2600 Nm * Euro VI E generation OM471 * High Performance Engine Brake * Air intake behind cab * G 281-12/14.93-1.0 transmission * Mercedes PowerShift 3 + PowerShift Advanced * Single-plate clutch * Predictive Powertrain Control * Driving program economy/power 3. Chassis, Axles & Steering * Front axle 8.0 t, 2-leaf * Rear axle hypoid 13.0 t, ring gear 485 * Axle ratio i = 2.733 * Servotwin steering * Direct steering * Front axle stabiliser * High-strength frame, U-profile, hole matrix 50×50 * Frame overhang 1050 mm * 3-piece fenders + EC-compliant spray protection * Underbody & side panels aerodynamic 4. Brakes & Safety * Disc brakes on front and rear axles * Electronic braking system (ABS/ASR) * Electronic air supply (medium) * Heated air supply system * Condensation monitoring * Electronic parking brake * Burst pipe safety system * TSA trailer stability control * Active Brake Assist 6 * Active Sideguard Assist 2 * Frontguard Assist * Lane Keeping Assist * Proximity control assist * Attention Assist * Traffic Sign Assist * Tyre pressure monitoring * Driver airbag * Speed limiter 90 km/h * Cruise control * First aid kit, warning triangle, warning light, hi-vis vest 5. Electrics & Electronics * AGM batteries 2×12 V / 220 Ah * Alternator 24–30 V / 150 A * Battery sensor * Various 12 V/24 V sockets * PSM 2nd generation * FMS interface * Engine start/stop * Switches for body electrics (No.1 & No.2) * Reversing warning system * Air suspension remote control (wired) * Pre-installation for electrical equipment * Pre-installation lift axle * Truck Data Center 8 * Multimedia cockpit interactive * Navigation system * Digital radio + sound system * CB radio 24 V * Reversing camera at rear of towing vehicle * Preparation for toll system * Preparation for Truck App Portal 6. Lighting & Visibility * LED daytime running lights * LED main headlights * LED tail lights * LED indicators (signature lighting) * LED work lights (lower, centre) * Headlamp cleaning system * Heated front mirrors * MirrorCam + chrome brackets * Light sensor & rain sensor * Air horns * External transparent sun visor * Preparation for beacons * Preparation for roof auxiliary lights 7. Tanks & Exhaust System * Main tank 570 L aluminium, left * AdBlue tank 75 L left * Lockable tanks * Protective cap for AdBlue dosing system * Exhaust system right side, horizontal 8. Wheels & Tyres * Front: 385/55 R22.5 on Alcoa Dura-Bright 11.75×22.5 * Rear: 315/70 R22.5 on Alcoa Dura-Bright 9.00×22.5 * Wheel nut covers 9. Fifth Wheel & Superstructure * SAF GF SK-S 36.20 fifth wheel coupling * Low-maintenance * Fifth wheel height 150 mm * Mountin

Condition: used, This used META shelving unit is a compact and flexible storage solution for workshops, warehouses, archives, and businesses. With a height of 250 cm, a depth of 40 cm, and a total of 6 storage levels, the shelving unit offers ample space for the organized storage of boxes, containers, spare parts, and other storage items. The modular shelving system can be used in a variety of ways and enables efficient use of the available storage space. 30.06 linear meters of shelving, 40 cm deep, used, workshop shelving, warehouse shelving, manual storage, plug-in shelving, small parts storage. Bsdpfez H Nlqex Aa Ijln Data: - Height: approx. 250 cm - Depth: approx. 40 cm - Length: approx. 30.06 linear meters Shelving offer of 30.06 linear meters consisting of: - 031 x uprights approx. 200 x 40 cm, pre-assembled - 180 x shelves approx. 100 x 40 cm - 720 x shelf supports - 030 x cross braces - Manufacturer: META CLIP - Load capacity: 100 kg per shelf, with evenly distributed load - Levels: 6 x storage levels - Surface: Sendzimir zinc-plated - Used, available from stock -- IMMEDIATELY AVAILABLE IN MULTIPLE UNITS -- Price: €2179.00 net plus applicable VAT You will receive an invoice with VAT shown. Transport: Delivery can be arranged through our partner shipping company upon request; the costs depend on the postal code. Assembly: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment, if required. Our recommendation: Please let us know your requirements… We will be happy to help you with the implementation of your projects, from planning and ordering to assembly. Are you interested or have any questions? Simply contact us via message or phone call. Our phone number can be found on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33902036248, empty load weight: 7,272 kg, maximum load weight: 27,728 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,460 mm, loading space width: 2,470 mm, loading space height: 2,655 mm, loading space volume: 92 m³, total length: 13,800 mm, total width: 2,550 mm, total height: 4,005 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Container color: solid color, RAL color freely selectable Chassis: semi-trailer, for forwarding companies Fine-grained steel welded construction in lightweight design, up to the support legs, trailer plate with replaceable 2" kingpin 24 tons, 2-speed support winch, single-sided operation Extension ladder at the rear Door latch on the side Folding mudguard for lighting unit Rear impact protection 1 aluminum ladder approx. 3,550 mm, with holder on the side 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Axles + suspension BPW disc brake axles with 430 mm disc diameter Air suspension, 1st axle automatic lift axle, including forced lowering and starting assist, activated by "3x braking" Braking system 2-line compressed air braking system Spring brake parking brake 2 tamper-proof coupling heads at the front 24 Volt EBS, electronic braking system with EBS socket at the front Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system "TPMS" tire pressure monitoring system according to ECE R 141, display via display in the towing vehicle, via EBS 1 additional air connection on the left rear, with quick-release coupling Wheels and tires 385/55 R22.5", manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side Yellow LED lighting on the side linked to the turn signal ("flashing side marker lights") 2 white position lights at the front in LED 2 white/red side marker lights at the rear 2 x 7-pin and 1 x 15-pin tamper-proof sockets at the front, without connecting cable 2 additional LED work lights at the rear, switched via reversing light Self-tipping hydraulics Hydraulic cylinder with sliding mechanism installed in the floor. 2-circuit hydraulics. Switching between forward/reverse operation is done electrically via remote control with cable Operation hydraulically via truck PTO Hydraulic connection with hose on the front wall and HDK screw connection NW = 48 mm Self-tipping floor Sliding floor with wear plate at the rear Floorboards made of aluminum, 8 mm floor profile, ribbed design Self-tipping container Aluminum box container made of high-quality, abrasion-resistant material. Front and side walls made of aluminum hollow profiles, welded all around at the top with a wide special reinforcing profile made of aluminum, welded to a special frame at the bottom. Sliding wall for better unloading of the load, with reinforced tarpaulin flaps at the bottom. Rear wall made of aluminum hollow profiles, as a 2-wing door, with a 1/2 to 1/2 split, framed all around with a special U-profile with stop and rubber seal, with 2 swivel latch bars on the outside, locked at the top and bottom. Rear wall with mechanical safety locking, operated at the rear on the left in the direction of travel Standing platform with ladder on both sides in the direction of travel left/right and railing, for opening and closing the roof tarpaulin 3 removable, swiveling crossbars for tarpaulin support + tarpaulin support at the front on the front wall and at the rear on the rear wall Paint finish Frame DB 7350 Novagrau "10-year warranty against rust through" Bledeza S E Ropfx Aa Isn Support legs Black coated Container Aluminum natural - can be painted in RAL color according to customer's request Roof tarpaulin Not yet

Condition: new, maximum load weight: 31,175 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,575 mm, loading space volume: 92 m³, Year of construction: 2026, Equipment: ABS, Stock number: 5742 THE PHOTOS IN THE LISTING ARE SAMPLE IMAGES AND DO NOT 100% MATCH THE ACTUAL EQUIPMENT! AVAILABLE FOR RENT, PURCHASE, OR RENT WITH PURCHASE OPTION BY AGREEMENT! Kraker approx. 92 m³ moving floor trailer with 10mm Cargofloor floor / remote control / wear plates / pneumatic underride guard / rental also possible! ---- * Manufacturer: Kraker * Model: K-Force - Moving Floor * First registration: - (NEW VEHICLE) * Color: Body RAL 9010 / Chassis MicroZinq / Tarp SIO 7999 Black * Technically permissible total weight: 39,000 kg * Unladen weight according to manufacturer: 7,825 kg * Payload: 31,175 kg * Volume: approx. 92 m³ (13.53 m long x 2.48 m wide x 2.369m/2.782m high) * Axles: 3x SAF with 1st axle as lift axle and starting aid / disc brakes * Tyres: 385/65R 22.5 on steel rims * Suspension: Air suspension with lift and lower * EBS Wabco * Chassis: Microzinc * Rear wear plates 1,250 x 2,500 x 3 mm * Double-wing rear doors with pneumatic locking * Operator platform at the front with access on the left * Saddle height: 1150mm * Cargo Floor CF 500 Compact floor with 21 floorboards * Floor 10mm thick, ribbed, with aluminium end caps * Operation via remote control and control box at the left rear * Rolling tarp with central locking * Sliding wall (moveable partition) made of aluminium with drag sheet Bedpfoyawkxjx Aa Ieln * 2 plastic track cleaners on the sliding carriage * Extendable access steps at the rear right * 4 x pivoting steel roof bows, 50mm round * 2 x round LED tail lights per side * 2 x LED work lights at support leg height * 2 x LED reversing lights mounted laterally behind the axles * Plastic toolbox at rear left * Holders for broom and shovel * 10-step ladder * Hydraulic hoses at the front approx. 3.5 m long * Single mudguards * Compressed air connection for cleaning gun * TPMS tire pressure monitoring system * Wabco Smartboard# AVAILABLE FOR RENT, PURCHASE, OR RENT WITH PURCHASE OPTION BY AGREEMENT! THE PHOTOS IN THE LISTING ARE SAMPLE IMAGES AND DO NOT 100% MATCH THE ACTUAL EQUIPMENT! Note on possible errors in the listing: Despite careful preparation of this listing, there may occasionally be errors in the text or details. We assume no liability for errors, changes, or prior sale. All information is supplied without guarantee. Please contact us to verify details or clarify any questions.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Workpiece & Performance Panel Formats: • Length 1,200–1,400 mm • Width 195 mm • Thickness 5–12 mm Line Performance (excerpt): • Multi-blade saw feed: 2–48 m/min • Pack assembly: max. 100 pieces/min • Packaging: up to 12 packs/min • Palletizing: up to 12 cycles/min Feeding & Cutting 1. BARGSTEDT TBP16/DG/30/22/S Gantry Feeder Vacuum gantry for feeding raw panels (fixed edge on the right) • Workpiece weight up to 100 kg • Capacity up to 5 cycles/min • Pallet return and light barrier safety system 2. BARGSTEDT TPP20/28/21/S Pallet Magazine Provision of empty pallets for feeding • Capacity approx. 12 pallets • Max. stack height 1,800 mm 3. BARGSTEDT TAR40/28/22 Décor Alignment Station Aligns panels for décor-oriented further processing 4. Multi-blade Circular Saw K34/G/2200 Longitudinal splitting with edge trimming • Feed speed 2–48 m/min • Cutting height up to 58 mm • Main motor 22 kW • 9 saw blades + 2 chippers 5. Brushing Unit (after longitudinal cut) Horsehair brush, working width 2,200 mm, with extraction 6. BARGSTEDT Cross-Cut Saw Station HPp11 Cross-cutting in throughfeed mode with pressure beam • Cutting width 2,200 mm • Pneumatic overhead pressure rollers Singulation & Transfer 7. BARGSTEDT TFV40/ZR/RL/22/13/02 Singulation Station Turner with compartments (2×8 compartments) for distributing multi-panel assemblies • Conveyor speed 10–50 m/min 8. BARGSTEDT Right-Angle Transfer (TW) 90° transfer with belt conveyors, feed up to 130 m/min For transfer to the profiling line Profile Processing (soundproofed) 9. HOMAG FR 20/08/10/S Longitudinal Profiling Double-sided format processing • 6 units per side • 6.6 kW per unit • Tool diameter up to 200 mm • Joint color application + drying 10. HOMAG FL 20/08/15/S Cross Profiling Double-sided end profiling • 6 units per side • identical performance structure • integrated edge sealing 11. Sonolit Soundproof Cabin Housing for both HOMAG profiling machines • Approx. 12,000 × 7,000 × 3,000 mm Post-processing 12. BARGSTEDT TTK44/21/14/02 Dry Turner Workpiece turning in throughfeed • up to 100 cycles/min 13. BARGSTEDT B017/R/19/12/2/S Brushing Unit Double-sided fine cleaning with extraction Packing 14. BARGSTEDT TVP40/L/14/02 Pack Assembly Station Automatic pack forming with 1st/2nd choice sorting • Panels 1,200–1,400 × 195 × 5–12 mm • Pack height up to 80 mm • Capacity 100 pieces/min 15. BARGSTEDT TVK40/R/14/02 Carton Station Folding and providing cartons prior to packaging • Up to 12 packs/min 16. BARGSTEDT TVA40/07/02 Paper Feeder Automatic application of protective paper • up to 10 packs/min guaranteed 17. Labelling Station Automatic pack identification (format range according to packaging data) Packaging 18. LP Maskin LPFK-2PFL-400 Shrinking Unit Fully automatic film packaging with shrink tunnel • Connection load 36–40 kW • Capacity up to 12 packs/min • Film width up to 800 mm 19. BARGSTEDT Belt Conveyor TFB20/017/04 with Air Shower Cooling section after the shrink tunnel Palletizing 20. BARGSTEDT TSH80/EO/14/08 Crosswise Package Stacking Automatic stacking of packages onto pallets • Packages up to 1,400 × 195 × 58 mm • Capacity max. 12 cycles/min 21. BARGSTEDT TBS0/D/30/08/S Swing Arm Stacker Bjdpfx Aoywxraea Ioln Layer-by-layer palletizing with vacuum suction cups • up to 6 cycles/min • Package weight up to 50 kg 22. BARGSTEDT PP20/12/08 Pallet Magazine Automatic provision of empty pallets for final palletizing

Condition: good (used), axle configuration: 3 axles, first registration: 08/2019, total length: 13,420 mm, total width: 2,550 mm, total height: 3,900 mm, color: yellow, Year of construction: 2019, Equipment: ABS, = Additional Options and Accessories = - Rear doors - Lift axle - Air suspension = Further Information = Intended use: Recycling Rear axle 1: Lift axle Unladen weight: 10,800 kg Payload: 33,200 kg Gross vehicle weight (GVW): 44,000 kg Body manufacturer: BODEX KIS 3 B Tipper: Rear Technical condition: Good Optical condition: Good 3-AXLE TIPPER TRAILER AIR SUSPENSION SAF AXLES 1 LIFT AXLE TYRES SIZE 385/65/R22.5 UNLADEN WEIGHT 10,800 KG HYVA TIPPING CYLINDER MOUNTED AT THE FRONT REAR TIPPER VOLUME = 75 m³ DOORS CATWALK AT THE FRONT SIDE WABCO SMART BOARD TOOLBOX Blsdpjy D Ub Defx Aa Ion FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: excellent (used), shelf length: 5,270 mm, shelf height: 2,278 mm, Technical data for the shelving rack: Racking system: SSI Schäfer Blodpfxow H N S Ns Aa Ijn Type: R 3000 Technical data for installation: Number of rack rows: 01 unit Rack length: approx. 5,270 mm Number of bays per rack row: 04 units @ 1,280 mm each Number of levels plus ground level: 06 units Scope of delivery includes: 05x Upright frames, new Material finish: sendzimir galvanized Frame profile dimensions: 31 x 60 mm Incl. bracing and base plates Uprights pre-assembled Height: 2,278 mm Depth: 800 mm 24x Shelf panels, used Material finish: sendzimir galvanized Dimensions: 1,280 x 775 x 40 mm Weight per unit: approx. 11.68 kg 02x Cross bracing, used Designation: KV31313 Material finish: sendzimir galvanized 01x Load sign Showing compartment & bay loads, manufacturer, and order number Dimensions: 297 x 210 x 2 mm General information on the item: This item is available for collection only. Any additional transport or shipping of this item will incur extra charges, which can be provided separately depending on the delivery destination and the scope of delivery.

Condition: new, functionality: fully functional, NEW GOODS Price plus VAT. The goods are also available in other quantities and versions. This package includes: 3 x uprights, each 220 cm high x 40 cm deep 12 x shelves, each 130 cm x 40 cm 48 x shelf supports 2 x diagonal braces with tensioners This results in a single row with 2 bays and 6 levels per bay, total length approx. 2.65 m 400m available immediately! Manufacturer: META Clip Type: Shelving rack Condition: New Height: 220 cm Length: approx. 1 x 266 cm Frame depth: 40 cm Assembly: Boltless system Shelf load: 150 kg per shelf Accessories such as: Floor fixing kit Connectors Load capacity warning signs Collision protectors Guard rails Wire mesh shelves Rear mesh panels Depth beams Separating rails ...and much more. Just ask us! Bsdpfx Aajyh Drcs Isln

Condition: good (used), shelf length: 3,960 mm, shelf height: 2,278 mm, Technical data for the shelving rack: Shelving system: SSI Schäfer Type: R 3000 Technical data for installation: Bedpfx Aajw H Rb Ej Isln Number of rack rows: 01 pc. Rack length: approx. 3,960 mm Number of bays per rack row: 03 pcs. at 1,280 mm each Number of levels incl. base level: 06 pcs. Included in the scope of delivery: 04x Rack uprights, new Material finish: Sendzimir galvanized Frame profile dimensions: 31 x 60 mm incl. bracing beams and base plates Uprights are pre-assembled Height: 2,278 mm Depth: 800 mm 18x Shelves, used Material finish: Sendzimir galvanized Dimensions: 1,280 x 775 x 40 mm Weight per unit: approx. 11.68 kg 01x Cross brace, used Designation: KV31313 Material finish: Sendzimir galvanized 01x Load sign with field and shelf load specifications, manufacturer, and commission number Dimensions: 297 x 210 x 2 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item is subject to extra charges, which can be individually requested from us depending on delivery location and scope.

Condition: used, We are offering used shelving units here. TECHNICAL DATA Manufacturer: FX Rauscher Type: P30 Condition: Used Frame height: approx. 2,500 mm Shelf dimensions: 1,220 x 400 x 33 mm Shelf load capacity: 100 kg Number of levels: 6 pcs Boltless assembly Use: single-sided Material: galvanized steel PRICE €506.50 net (2 starter bays + 8 extension bays) €602.74 gross incl. VAT Bljdpfx Aasy Hqrko Ijn Tiered Pricing Starter bays: 1 - 5 pcs: €70.00 net y6 - 20 pcs: €66.63 net 21 - 50 pcs: €63.25 net from 51 pcs: €59.88 net Extension bays: 1 - 5 pcs: €50.00 net 6 - 20 pcs: €47.50 net 21 - 50 pcs: €45.00 net from 51 pcs: €42.50 net Large quantities are available directly from stock. YOUR CONTACT PARTNERS: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & INSTALLATION We can assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping is available at an extra charge. Additional costs vary depending on delivery location and order volume and can be individually quoted upon request. PROJECT PLANNING Our sales team will gladly provide you with a non-binding, tailor-made offer according to your requirements. TRANSPORT & INSTALLATION We are happy to assist you with the transport and installation of the goods. PAYMENT TERMS Payment terms are to be agreed upon in the case of an order. The indicated price is per unit/net price or as stated in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US DLK in Nordhorn trades in new and used products from the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machines for commerce, industry, and trade. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please feel free to contact us. Four wins – The success building blocks of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: new, mileage: 157 km, power: 412 kW (560.16 HP), fuel type: diesel, empty load weight: 8,183 kg, maximum load weight: 9,817 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,750 mm, fuel consumption (urban): 596 l/100km, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 5,960 mm, Year of construction: 2026, lifting height: 4,000 mm, Equipment: ABS, air conditioning, cruise control, hydraulics, navigation system, parking heater, Color: Ivory White, Current tires: M+S tires, Unladen weight: 8,183 kg, Permissible total weight: 18,000 kg, 1st axle: 385/55 R22.5, 2nd axle: 315/70 R22.5, Seats: black leather, Suspension: leaf/air suspension, Retarder: R4700D, Digital tachograph: Smart 2 ADR Continental, Fifth wheel coupling: FISCHER S36.20W 2/150, PTO: EG9R DCP1B, Electronic braking system (EBS), Brake assist, Electronic stability program (ESP), Automatic climate control, Stationary air conditioning, Radio navigation system, Adaptive cruise control (ACC), Auxiliary heating: 3 kW, Air-suspended driver's seat: "Premium" with seat ventilation, LED headlights, Cornering lights, Headlight range adjustment: manual, Digital radio reception (DAB), Scania Lane Departure Warning System, Reversing camera, Rain sensor, Leather steering wheel, Roof spoiler, Fog lights: LED, Exterior mirrors electric and heated: driver/passenger side, Wind deflector, Sun visor: exterior trim, Storage package: external storage compartment on driver/passenger side, Cool box, Axle load indicator: rear axle, LED daytime running lights, Traffic sign recognition, Walking floor hydraulics: 170 / 250 bar, - Roof console rear wall - Aluminum hydraulic tank 200 liters - LED rear lights - Side panelling between the axles - Long-range roof spotlights, Non-binding offer, subject to errors and prior sale. Blsdezz U Hrspfx Aa Ion

Condition: new, Technical data for shelf racking: Racking system: META Type: CLIP Technical data for installation: Number of racking rows: 1 pc. Racking length: 4,100 mm Number of bays per row: 3 pcs. Number of mesh shelves: 5 pcs. per bay Bljdpfxjxd T Exo Aa Ijn Scope of delivery includes: 04x Upright frames, new Material finish: Sendzimir galvanized Frame profile dimensions: 50 x 40 x 1 mm Adjustment pitch: 25|25 mm Incl. base plates, end caps, and reinforcement strip Uprights are pre-assembled 2,000 mm high 835 mm deep 15x Mesh shelves, new Material finish: Sendzimir galvanized Overall width: approx. 1,300 mm Overall depth: approx. 800 mm Frame profile dimensions: 40 x 25 x 1 mm Mesh size: 95 x 50 mm Cross beams (3 pcs.): 750 x 18 mm Weight per unit: approx. 6.62 kg Max. load per shelf: 200 kg with evenly distributed load 08x Levelling plates, new Dimensions: 76 x 58 x 2 mm Weight per unit: 0.064 kg Material finish: Sendzimir galvanized 60x Shelf supports, new Weight per unit: approx. 0.014 kg Material finish: Sendzimir galvanized 03x Cross braces, new Material finish: Sendzimir galvanized 01x Load capacity sign with information on bay and shelf loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any transport or shipment of this item is subject to additional costs, which can be individually requested from us depending on the delivery location and scope of delivery.

Condition: new, 🧰 Product Features • Consists of 5 frames, each measuring 225 x 50 cm • Includes 20 shelves, each measuring 100 x 50 cm • Includes 2 double doors, each measuring 211 x 100 cm (lockable) • Includes 2 pull-out drawers, each measuring 99 x 21 x 50 cm • Includes 1 pull-out drawer measuring 99 x 10 x 50 cm • The set can also be customized to your individual needs! 💰 Price €990,- net, excluding VAT • Quantity discount: available upon request • Shipping costs: available upon request, throughout Europe • Delivery time: immediately available • Inspection and collection: possible at any time by appointment We have over 5,000 linear meters of pallet racking in stock from numerous manufacturers. (Changes and errors in technical data, information, and prices, as well as prior sale, are subject to change! See our terms and conditions; all prices exclude VAT, ex warehouse.) Lenox Trading – Top warehouse technology & used & new heavy-duty racking Description: Are you looking for high-quality warehouse racking for sale? With approximately 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of storage platforms & steel platform systems immediately available • 30–50 semi-trailer truckloads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY AFFORDABLY ONLINE): Whether you want to buy pallet racking, heavy-duty racking, high-bay racking, shelving racking, tire racks, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling, and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATIONS: • SSI Schäfer (Schäfer Warehouse Technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi Cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner Bodpfew A Iz Uex Aa Ioln 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance projects, we offer a complete, all-round service package: 1. Lump-sum purchase: purchase of merchandise, equipment & complete inventory, including a thorough clearance. 2. Commission-based auction: conducting auctions on behalf of clients. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling, and thorough handover. Whether you found us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: good (used), The scope of delivery includes: 01x Locking bracket, used Material color: sendzimir galvanized Total length: approx. 1,640 mm Leg "A" approx. 39 mm (flanged) Leg "B" approx. 63 mm Support surface: approx. 60 mm Leg "C" approx. 13 mm Material thickness: approx. 1.50 mm Weight / piece: approx. 2.330 kg General information about the article: Bljdporfx Hzofx Aa Isn This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery. depending on the place of delivery or scope of delivery.

Condition: good (used), Approx. 10 spring-loaded base trolleys, Zarges, 195 L – used - : Bljdpfxjxqfnrs Aa Isn Price per unit: €495 (net), ex location! Minimum purchase: 5 units! Manufacturer: Zarges Model: 40645, spring-loaded base trolley W 161 Year of manufacture: unknown With push handle Item no. Internal length (approx. mm) Internal width (approx. mm) Internal height (approx. mm) External length (approx. mm) External width (approx. mm) External height (approx. mm) Rated load (kg) Volume (litres) Weight (kg) 40645 1010 420 460 1060 470 800 30 195 21.0 Equipped with 4 swivel castors in corner configuration. Original price: approx. €1,500 Condition: good Available: immediately Location: Attenweiler

Condition: new, functionality: fully functional, empty load weight: 9,000 kg, maximum load weight: 27,000 kg, overall weight: 36,000 kg, axle configuration: 3 axles, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 8,000 kg, permissible axle load (axle 3): 8,000 kg, first registration: 03/2026, loading space length: 12,600 mm, loading space width: 2,470 mm, loading space height: 2,300 mm, loading space volume: 70 m³, total length: 13,000 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 24R20,5, tire condition: 100 %, wheelbase: 30 mm, maximum speed: 80 km/h, color: grey, trailer brake: trailer braked, Year of construction: 2026, Agrotruck Moving Floor Bjdpfjytqpbsx Aa Isln Agrotruck moving floor with tractor unit (Note: The images displayed are SAMPLE IMAGES) Tractor unit USED, MAN all-wheel drive, 6 years old, approx. 250,000 km, Agrotruck registration including Agrotruck tyres. Agrotruck moving floor NEW VEHICLE, unladen weight 9 tons, 72 m² cargo volume, 12,600 mm superstructure length, fifth wheel height from 1,230 mm (hydraulics with road tyres) to 1,400 mm (full all-wheel drive with agricultural tyres), high-speed unloading system enables discharge as fast as a pusher trailer, interchangeable tyres. Option 1: 1st axle 445/65R22.5 2nd + 3rd axle 600/65R26.5 Option 2: 1st + 2nd + 3rd axle 445/65R22.5 All wheels are motorway-approved! Air suspension, mechanically forced steering, only moving floor hydraulics required, hydraulic tailgate, two-part automatic tarpaulin, operated in parallel with folding bows, remote control operation.

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, -Panama Plane 900g -10 mm floor -V-shaped sheet metal 2000x1500x4 -Service door on the front panel -12 pairs of lashing eyes on the front panel Chassis: Design with continuous, reinforced chassis, new body manufactured in a self-supporting design with corresponding reinforcements in the lower chord for particularly high stability and strength, cross members 140 mm high, reinforced design Axle and suspension: Disc brake 22.5 Jost axle assembly, 3*9 tons with DCA - air suspension, lift and lower function, Wabco Smartboard, electronic brake wear indicator BVA, 1st axle with start assist (without SZM equipment) Tires and wheels: 6 wheels with tires size 385/65 R 22.5, premium tires, on steel rims, 11.75*22.5 ET 120 Kingpin: Mechanical support winch, 2x20 tons support load Braking system: EBS E system Wabco with RSS system (Roll Stability Support) and premium modulator, spring brake system acting on two axles with operation at the rear Electrical system: According to the guidelines of EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint integrated in the aluminum rear panel, 24 Volt system with 1*15-pole and 2*7-pole socket, with side marker lights in LED design 2 separate LED reversing lights integrated in the U-shaped protection, Body/tipper bed: "Body fully welded inside", reinforced side walls Aluminum tipper bed, side walls with 30 mm thick aluminum plank profiles Blsdpfefi Nmpsx Aa Ien (2-3 mm) 600 mm wide, completely welded with lower and upper chord, plank profiles fully welded inside, aluminum front panel with 600 mm plank profile, 2-3 mm thick, in a straight design, with 2 aluminum wing doors 50/30 mm thick, sliding residual unloading wall with Kevlar sheet approx. 1,500 mm long plus side Kevlar seal Hydraulic system: "Cargo Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles, mounted with approx. 880 PE-HD gliders, type CF 8 mm floor design, fixed parts on the front panel, separate possibility for connecting the hydraulic line under the vehicle with fixed parts, operating pressure 190 - max. 240 bar, aluminum end pieces welded into the sliding floor, without hydraulic hoses Accessories: 6 PVC mudguards with 2 anti-spray mud flaps, 1 aluminum spare wheel holder, side aluminum approach guard in foldable design, 1 toolbox approx. 860*460*400 mm in plastic, 3.7m aluminum ladder, tarpaulin approx. 660g/m2 with tarpaulin system incl. tarpaulin rail, with side tension straps or quick release fastener, walkway on the front panel with access ladder, 3 steel locking bars with locking mechanism, swiveling and lockable, aluminum protective cover with hinges for the lighting, etc. +590¤ Delivery costs Unladen weight: approx. 7,700 kg Offer and images subject to change.

Condition: new, maximum load weight: 28,320 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, Chassis: Design with continuous chassis, newly manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower belt for particularly high stability and strength, reinforced cross members 140mm high (for high ground load), additional reinforcement as a gusset plate in the front lower belt/vehicle frame area, chassis made of galvanized steel up to the support structure. Bledpfx Aaefi Nmwe Ijn Axles and Suspension: Disc brake 22.5, Jost (DCA) axle assembly design, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard information center, electronic brake wear indicator BVA readable in the central control unit (display), 1st axle with starting aid (new EC regulation, without central control unit option), (optional, 1st and 3rd axles can be lifted). Tires and Wheels: 6 wheels with tires of size 385/65 R 22.5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75x22.5 ET 120. Kingpin: 2" screwed into a 10mm thick plate. Landing Gear: Mech. support winch with two speeds, 2x 20 tons support load with swivel foot. Braking System: According to EG standard, EBS electronic system Wabco with RSS system (Roll-Stability-Support) and Premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system. Electrical System: According to the guidelines of EG standard 91/633 and 97/28 with 2 five-chamber lights, type Aspöck Europoint, integrated in the aluminum rear panel, 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED version, 2 reflective panels on the rear, position lights at the front 2x white, rear 2x red, 2 separate halogen reversing lights integrated in the U-profile. Body/Dump Body: Body fully welded inside, reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400 dkn/10,400, aluminum dump body, side walls 30mm thick aluminum plank profiles (2-3 mm) 600mm wide, completely welded with upper and lower belts, plank profiles fully welded inside, floor laid as a sliding floor system on 140mm aluminum cross members, floor load capacity approx. 9 tons/m2, cross members mounted closely together (approx. 350mm), design with special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum wing doors 50/30mm thick with 2 swivel rod locking mechanisms, fastened in the welded aluminum rear frame in Teflon bearings and stainless steel bearings, doors secured in the open position with one chain each on the side, hard wear plates on the side walls approx. 2000x1500x4mm, fully welded, moving residual emptying wall with Kevlar sheeting approx. 1800mm length plus side brushes with Kevlar sheeting seal, service door in the front wall with ladder, folding inwards. Hydraulic System: Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD sliders plus anti-lifting slide bearings, type CF 10mm floor design, hydraulics with approx. 200mm working stroke, fixed points on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed points, line size NW 21, fixed points with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric operation behind the left side with remote control integrated in a lockable waterproof box, without hydraulic hoses. Accessories: 6 PVC mudguards with 2 anti-splash mud fla

Condition: used, total length: 1,270 mm, total width: 482 mm, total height: 20 mm, The scope of supply includes: 1x used grating floor panel Material color: hot-dip galvanized Overall depth: approx. 482 mm (direction of load-bearing bars) Overall width: approx. 1,270 mm (direction of crossbars) Blodpfx Aaszr Nfws Ion Load-bearing bar dimensions: 20|1.80 mm Bearing: approx. 20 mm Frame height: approx. 20 mm Mesh size: 68 x 35 mm Weight/piece: approx. 6.72 kg Note: - The shelving grating may have damage, scratches, dents, or weld marks. General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), shelf length: 2,650 mm, shelf height: 2,278 mm, Technical data for the shelving unit: Shelving system: SSI Schäfer Type: R 3000 Technical data regarding installation: Number of shelving rows: 01 pc. Shelving length: approx. 2,650 mm Number of bays per row: 02 pcs. à 1,280 mm Number of levels incl. ground level: 06 pcs. Scope of delivery includes: 03x Upright frames, new Bljdpfxjw H Rhxe Aa Ion Material finish: Sendzimir galvanized Frame profile dimensions: 31 x 60 mm Including bracing bars and base plates The uprights are pre-assembled Height: 2,278 mm Depth: 800 mm 12x Shelf panels, used Material finish: Sendzimir galvanized Dimensions: 1,280 x 775 x 40 mm Weight | per piece: approx. 11.68 kg 01x Cross bracing, used Designation: KV31313 Material finish: Sendzimir galvanized 01x Load capacity sign with details of bay and shelf loads, manufacturer, and commission number Dimensions: 297 x 210 x 2 mm General information about the item: This item is only available for collection. Any desired transport or shipping of this item is subject to additional costs, which can be provided separately depending on delivery location and scope.

Condition: good (used), Technical data for the clamping foot: Manufacturer: META Type: META CLIP The scope of delivery includes: 01x clamping foot, used for double shelf racks suitable: for upright profile 50 x 30 mm Material color: sendzimir galvanized Total width: approx. 110 mm Total depth: approx. 75 mm Material thickness: approx. 2 mm Weight approx. 0.110 kg each Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation Bsdpfxornqmbj Aa Isln or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 20241204, total height: 905 mm, overall weight: 550 kg, total length: 1,200 mm, total width: 1,200 mm, type of input current: three-phase, tank capacity: 220 l, usable tank capacity: 110 l, input voltage: 400 V, workpiece width (max.): 200 mm, workpiece height (max.): 200 mm, outer diameter: 200 mm, workpiece length (max.): 200 mm, rotational speed (min.): 1,400 rpm, inner dimension width: 240 mm, power: 4.5 kW (6.12 HP), input frequency: 50 Hz, warranty duration: 12 months, load capacity: 100 kg, Vibra-Dry DK 200 WT maize dryer with pneumatic emptying and steel base. Bjdpfx Aaevi Nhds Ioln The high-quality Vibra-Dry DK 200 WT maize/grain dryer with a working volume of 220 liters is for sale. This versatile machine is perfect for drying and polishing with crushed corn granules, resulting in a flawless and shiny surface. Main features: Working principle: The moist parts are automatically transported from the circular vibrator via the separating table into the dryer. Pneumatically controlled outlet valve: For automatic emptying after drying. Coating: Inner walls and inlet and outlet area with durable 2-component PU coating to minimize wear and reduce noise. Temperature control: Adjustable between 30°C and 50°C via manual control in the control cabinet, with levels for 0%, 50% and 100%. Automatic temperature maintenance by switching the heating on and off. Technical details: Filling with approx. 10-15% crushed maize granules (25 kg recommended). Commissioning: Use of GM 16 or GM 20 maize grains required. The machine is reliable, robust and ideal for farms that value quality and efficiency. Enquire now!

Condition: new, Technical data for the shelving rack: Shelving system: META Type: CLIP Technical data for installation: Number of shelving rows: 1 unit Rack length: 3,200 mm Number of bays per shelving row: 2 units Number of wire mesh shelves: 5 units per bay Scope of delivery includes: 04x Rack uprights, new Material finish: sendzimir galvanized Frame profile dimensions: 50 x 40 x 1 mm Adjustment increment: 25|25 mm Including base plates, end caps, and bracing The uprights are pre-assembled 2,000 mm high 835 mm deep 15x Wire mesh shelves, new Material finish: sendzimir galvanized Total width: approx. 1,000 mm Total depth: approx. 800 mm Frame profile dimensions: 40 x 25 x 1 mm Mesh size: 95 x 50 mm Reinforcement beams (03 pcs): 750 x 18 mm Weight per piece: approx. 5.14 kg Max. load per shelf: 200 kg, with evenly distributed load 08x Levelling plates, new Dimensions: 76 x 58 x 2 mm Weight per piece: 0.064 kg Material finish: sendzimir galvanized 60x Shelf supports, new Weight per piece: approx. 0.014 kg Material finish: sendzimir galvanized Bljdpfx Aaoxdxdtj Ijn 01x Cross brace, new Material finish: sendzimir galvanized 01x Load sign With information on bay and shelf load, manufacturer, and commission number Dimensions: 297 x 210 x 2 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Additional transport or shipping of this item is associated with extra costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: used, This used META shelving unit is a compact and flexible storage solution for workshops, warehouses, archives, and businesses. With a height of 250 cm, a depth of 40 cm, and a total of 6 storage levels, the shelving unit offers sufficient space for the organized storage of boxes, containers, spare parts, and other storage items. The modular shelving system can be used in a variety of ways and enables efficient use of the available storage space. 8.06 linear meters of shelving units, 40 cm deep, used, workshop shelving, warehouse shelving, hand storage, plug-in shelving, small parts storage. Data: - Height: approx. 250 cm - Depth: approx. 40 cm - Length: approx. 8.06 linear meters Shelving offer of 8.06 linear meters, consisting of: - 09 x uprights approx. 200 x 40 cm, pre-assembled - 48 x shelves approx. 100 x 40 cm. - 192 x shelf supports. - 08 x cross braces - Manufacturer: META CLIP. - Load capacity: 100 kg per shelf, with evenly distributed load. - Levels: 6 x storage levels. - Surface: Sendzimir galvanized. - Used, available from stock -- IMMEDIATELY AVAILABLE IN MULTIPLE UNITS -- Price: Blsdpfez H N Avjx Aa Ien €643.00 net plus applicable VAT You will receive an invoice with VAT shown. Transport: Delivery can be arranged by our partner shipping company, if desired; the costs depend on the postal code. Assembly: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment, if required. Our recommendation: Let us know your requirements... We will be happy to help you realize your projects, from planning and ordering to assembly. Are you interested or do you have any questions? Simply contact us via message or phone. You can find our telephone number on our company page. ☎️ You can reach us by telephone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: like new (used), total length: 1,356 mm, total width: 640 mm, number of shelf rows: 1, frame height: 2,490 mm, support length: 1,300 mm, Technical data for the shelving unit: Shelving system: META Type: CLIP Technical data for installation: Number of shelving rows: 1 Shelving length: approx. 1,356 mm Number of bays per shelving row: 1, each 1,300 mm Number of levels including base level: 6 Included in the scope of supply: 02x shelving uprights, used Material color: blue Frame profile dimensions: 50 x 40 x 1 mm Adjustment grid: 25|25 mm Incl. base plates and partition strip The uprights are pre-assembled 2,490 mm high 640 mm deep 06x shelves, new (2nd choice) Shelf designation: MS150-III Material color: sendzimir galvanized Dimensions: 1,300 x 600 x 40 mm Max. load per shelf: 150 kg with evenly distributed load 04x leveling shims, used Dimensions: 76 x 58 x 2 mm Weight per piece: 0.064 kg Material color: sendzimir galvanized Bodpfx Ajzun N Tsa Isln 24x shelf supports, new Weight per piece: approx. 0.014 kg Material color: sendzimir galvanized 01x cross bracing, used Material color: sendzimir galvanized 01x load sign with information on bay and shelf loads, manufacturer and batch number Dimensions: 297 x 210 x 2 mm General information about the item: This item is offered for pick-up only. Any further desired transport or shipment of this item will incur additional costs, which can be inquired separately depending on the delivery location or scope of delivery.