Used Bandsaw Fendo 250A for sale (489)

Condition: new, capacity 90 degrees: round 125 mm capacity 90 degrees: square 125 mm Crjdpfx Amoupw R No Rsc 127 x 125 mm dimensions of saw-band 1435 x 12,7 x 0,65 mm band speed 38 - 80 m/min total power requirement 0,95 kW weight of the machine ca. 18 kg dimensions 720 x 380 x 450 m Both straight and miter cuts can be made at angles between 45 and 90 degrees. With the metal band saw you not only work precisely, but also quickly: the band speed can be variably adjusted between 38 and 80 meters per minute. With a weight of only 25 kilograms, the saw can be used mobile.

Condition: new, capacity 90 degrees: round 240 mm capacity 90 degrees: square 240 mm 165 x 310 mm saw band length 2.725 x 27 x 0,9 mm mm table height 940 mm band speed 35 / 70 m/min total power requirement 1,1 kW weight of the machine ca. 0,4 t The Z252/DG has the following equipment: - Hydraulic semi-automatic, - Double miter 60° left/45° right Cedpfxsfgyh Ho Am Rjrc - emulsion pump, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use.

Condition: new, capacity 90 degrees: round 300 mm capacity 90 degrees: square 330 mm 400 x 310 saw band length 3820 x 34 x 1,1 mm band speed 22 - 88 m/min table height 930 mm total power requirement 2,2 kW weight of the machine ca. 0,8 t Crjdpfjwinykex Am Rsc dimensions of the machine ca. 2,22 x 1,2 x 2,1 m Double miter band saw, hydraulic semi-automatic • miter left 60° + right 45° • Industrial hydraulics, powerful 18 bar • Best access to the material • Ammeter to check a. - Optimization of cutting force - Tape life - cutting course • Vise closes/opens hydraulically • Material turntable with ball bearings b. • Adjustable quick-release • Material height sensor Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, capacity 90 degrees: round 500 mm capacity 90 degrees: square 420 mm 600x400 saw band length 5320x34x1,1 mm band speed 15 - 100 m/min table height 805 mm total power requirement 3,0 kW weight of the machine ca. 1,45 t dimensions of the machine ca. 1,72 x 2,5 x 2,5 m Double miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I • miter left + right 60° • Frequency-controlled saw drive • 34 mm saw band height • Wear-free material support turntable, ball-bearing • To position the saw blade guides using a very wide linear guide • Strong, robust gearbox • Large chipboards • 2 integrated support rollers left and right Csdpfx Amjupxupe Rjrc • Removable chip tray (disinfection) • Free-standing control panel, safe and ergonomic • Storage space for tapes, consumables • Hydraulic cutting pressure control valve • Material height sensor (automatic cut start detection) • Preload super fast (front loading) • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Minimum cutting range from around 10 mm Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, cutting diameter 227 mm saw band length 2455 mm table height 840 mm cutting width 260 mm turning speed range: 36 / 72 m/min dimensions of saw-band 2455 x 27 x 0,9 mm capacity 90 degrees: round 227 mm capacity 90 degrees: square 220 mm capacity 90 degrees: flat 260 x 220 mm capacity 45 degrees: round 150 mm capacity 45 degrees: square 145 mm capacity 45 degrees: flat 200 x 220 mm total power requirement 1,5 kW weight of the machine ca. 0,25 t dimensions of the machine ca. 0,8 x 1,4 x 1,5 m Csdpfx Asfgyh Ejm Rsrc Miter band saw - automatic cut - Base frame - Coolant pump - Chip brush for cleaning the saw band - Vise with quick adjustment

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 950 mm band speed 35 + 70 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,42 t dimensions of the machine ca. 1,23 x 1,7 x 1,75 m Double miter metal band saw, GBS 250 Super AutoCut (20413) - Miter cuts up to 60° left and 45° right - Ball bearing rotary table Quick clamping device Solid, large material support Automatic cooling Credpfx Ajurc S Rom Roc

Condition: new, capacity 90 degrees: round 130 mm capacity 90 degrees: square 127 x 127 mm dimensions of saw-band 1140 x 13 x 0,65 mm band speed max. 144 m/min total power requirement 1,1 kW weight of the machine ca. 15 kg dimensions 500 x 300 x 400 m Portable and removable metal band saw Special features Powerful with 1100 watts. Including 2 saw bands, work table and integrated LED lighting. With adjustable, variable handle. Light and handy. For universal work in the workshop, on the construction site or for private use. Crodeupw N Eopfx Am Rjc

Condition: used, Year of construction: 1998, capacity 90 degrees: round 250 mm capacity 90 degrees: square 240 mm Cedpeu Sbpvofx Am Rerc saw band length 2965 x 27 x 0,9 mm table height mm band speed 37 / 76 m/min total power requirement 1,0 kW weight of the machine ca. 0,38 t dimensions of the machine ca. 1,0 x 1,6 x 1,4 m double miter band saw

Condition: new, cutting diameter 185 mm saw band length 2.085 x 20 x 0,90 mm table height 920 mm band speed 35 + 70 m/min connected load frequency 400 V total power requirement 0,8 kW Cedjvn Uzaopfx Am Rsrc weight of the machine ca. 200 kg Berg & Schmid - GBS 185 Eco AutoCut Metal Band Saw Extremely fast and smooth sawing thanks to improved drive technology - Miter cuts up to 60° left - Suitable for dry and wet cutting - Coolant system - Machine base

Condition: new, 1000 mm 1000 mm 1200x1000 mm saw band length 11300 x 80 x 1,3 mm Cjdpfx Ast Eacgjm Rjrc table height 790 mm band speed 14 - 60 m/min total power requirement 18 kW weight of the machine ca. 9,0 t dimensions 5,0 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Bandsaw MACC SPECIAL 411 CSO, year 2019 Condition: very good - Sawing machine with cutting band falling controlled by hydraulic - Vice closure operated manually - Manual head return - Vertical rotation on bolt with adjustable tapered bearings without backlash - High-capacity band control by two-speed motor and special reducer with bronze gear tempered and ground worm screw - Blade tensioning obtained per manual rotation of the handwheel and guaranteed by microswitch - Vice with device for quick approach - Accident-preventing devices on flywheel casing, on control handle, on blade, and external guard - Hydraulic cylinder for controlled descent Cjdpjpmaubjfx Am Rsrc - Cutting thickness 1,2 mm - Cutting range 45° left 60° right - Adjustable end stop for cuts of the same size - 24 V low voltage control - 0,06 kW power-driver pump for band cooling - Pedestal with chip collection tray and removable tank for coolant - Inlet conveyour

Condition: refurbished (used), Year of construction: 1975, functionality: fully functional, CANALI Vertical Automatic High-Performance Block Bandsaw Model BBS.V "PACIFIC" K/L-B-P 1800, Type 555, Year 1975 with operator control system in the cabin, Bandsaw wheels Ø 1800 mm, bandsaw wheel width 280 mm, Max. saw blade width 310 mm. Bandsaw blade length 11,500 mm Crodpfxsxvrnis Am Rec Round timber infeed approx. 20 m long, four strands with inserter Block carriage with ejector onto block transverse conveyor CANALI pneumatic log carriage Type 501.09 with 4 clamping claws, 3 log turners, 4 ejectors Drive power 100 kW, carriage speed 5-120 m/min. driven roller conveyor with side board removal with brush, lifter with stripper for cut-out removal Roller conveyor approx. 12 m with lifting stripper for manual stacking Stacking device with turning unit for bundle packaging Lowerable bundle with transverse bundle conveyor Complete electrical control cabinets Full band saw blade sharpening equipment

Condition: ready for operation (used), Log band-saw with two band saw units at same machine. The unit is delivered complete with electrical and hydraulic Crsdpfx Aoypakasm Rjc parts. Plus PLC for setting of measurement. Max log diameters 700 mm Sawing length 6.1 meter

Condition: used, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 400 mm, saw band length: 5,550 mm, saw band width: 80 mm, table length: 800 mm, table width: 1,060 mm, working height: 400 mm, - Italian manufacture - Lamella band saw - Unpainted - Very good condition - Used saw Band Saw: - Wheel diameter: 800 mm - Max. blade width: 80 mm - Max. cutting height: 400 mm - Main drive motor: 11 kW - Feed speed range: 2–40 m/min - Feed system with pneumatic pressure to the guide - Metal slip-in feed roller Crsdpow H Rq Hefx Am Rec - Blade length: 5550 mm - Throat (blade-to-frame distance): 780 mm - Screw-type blade tensioning - Table size: 1060x800 mm - Tilting worktable: up to 15° - Extraction port diameter: 120 mm - Blade lubrication system - Foot brake - Cast wheels - Star/Delta starting - Power supply: 380V - Dimensions (LxWxH): 1600x1100x2400 mm - Weight: 860 kg Feed Unit: - Metal, toothed, drive roller - Five feed speeds, selectable by belt adjustment - Roller height: 30 mm - Feed motor: 0.75 kW - Pressure system

Condition: excellent (used), Bandsaw with feed MEBER SR - after the technical review - in good condition - Italian production TECHNICAL PARAMETERS: 4 kW main engine wheel diameter 800 mm cutting height 420 mm Cjdpfx Amefwl Uas Rerc maximum width of the cut material 780 mm cutting width at the ruler of 575 mm cutting width with rolls 195 mm maximum width of the material cut with a feed 355 mm cutting band width max 40 mm feed speed adjustable on the inverter feed speed range 0-12.5 m / min height of the feed roller 140 mm pneumatic feed pressure upper and lower belt guides 0.75 kW feed motor stub diameter 100 mm dimensions (length / width / height) 260 x 165 x 115 cm weight 700 kg

Condition: new, The Brugger BS31 Pro log band sawmill - Powerful precision for efficient sawing! The Brugger BS31 Pro is a simply designed yet sophisticated sawmill that effortlessly transforms logs with a diameter of up to 76 cm into high-quality boards and beams. The log band sawmill requires little technology and is therefore easy to operate and requires little maintenance. The BS31 Pro has an electric height adjustment, digital height display, adjustable blade guide and many other improvements that make work easier. Technical data: - 76cm trunk diameter - 14 hp petrol engine or 7.5 kW electric motor - Electric height adjustment - digital height display - adjustable blade guide The standard version of the sawmill has a track length of 4 m, so that logs with a length of approx. 3 m can be processed. If required, the sawmill can easily be extended by a further 2 m. The log band sawmill is equipped with a powerful 14 HP Kohler petrol engine or optionally a 7.5 kW 400V electric motor to offer you maximum performance and flexibility. Codpfx Aspz I I Uem Rjrc The BS31 Pro log bandsaw is perfect for hobby sawyers, but also for professional use and forest owners. Prices Brugger BS31 Pro - 4.599 € 2m track extension - 349 € Get the Brugger BS31 Pro log band sawmill now and experience powerful, precise sawing at an unbeatable price-performance ratio! Contact us for a customized offer!

Condition: refurbished (used), AKE Log bandsaw groups with or without chipper canter unit We can offer different constellations of AKE Log bandsaw type 245 as below: A. Bandsaw groups with 2 , 3 or 4 bands B. Bandsaw groups with 2 , 3 or 4 bands and chipper-canter unit. Credpfxjiv Stie Am Rec C. Complete sawline ( type SuperSaver ) Bandsaw groups with 2 , 3 or 4 bands and chipper-canter unit. Plus board edger unit. Capacity up 35000 m3 of ready sawn wood per year and single shift

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, Complete Sawmill with Carriage Bandsaw and Edger including conveyors 4 Headblock Log Carriage - 1200 mm Fully Hydraulic Bandsaw - 1+2 Edger Cedey I A H Aepfx Am Rorc

Condition: new, Year of construction: 2025, for saw blades Crodpfjxz E Uajx Am Rsc Width: 38 to 170 mm Length: 4,000 - 8,000 mm Also suitable for detecting bent teeth.

Condition: used, functionality: fully functional, Band Saw Blade Sharpener PERFECTA Credsyy Sdbopfx Am Rjc Specification: • condition - used, after maintenance • manufacturer - PERFECTA • 0.75 kW motors (3-phase) • grinding angle adjustment range 0-10 degrees • original paintwork • body dimensions - 50 x 50 x 130 cm (width x length x height) Additional information: • the machine is in good technical condition, ready for immediate use • the displayed photos show the actual condition of the sale item • possibility to turn on and test the device on site • the auction price does not include VAT or transport costs Financing and transport: • we organize transport via MDD fleet, courier companies, or external carriers • we offer financial support in the form of leasing or lease loan

Condition: used, functionality: fully functional, Band Saw Blade Sharpener OSAMA Specification: • Condition – used, after inspection • Manufacturer – OSAMA • Motors with 0.75 kW power (3 phase) • Grinding angle adjustment from 0 to 15 degrees • Original paintwork • Body dimensions – 50 x 50 x 130 cm (width x length x height) Additional information: • The machine is in good technical condition, ready for immediate use • The presented photos show the actual condition of the item for sale Cedpfeyy Nqxex Am Rsrc • Possibility to power on and test the machine on site • The price listed in the auction does not include VAT or transport costs Financing & Transport: • We organize transport via MDD fleet, courier companies, or external carriers • Financing options available in the form of leasing or lease credit

Condition: used, functionality: fully functional, Istech 431 NC bandsaw, year 2007, round cutting capacity 430 mm, square cutting capacity 430x430 mm, cutting stroke 500 mm, blade motor power 5.5 kW. Dimensions: 240x260x260(h) cm, Weight 3500 kg. Csdpewvqpuofx Am Rorc

Condition: new, neu ca. 10 Wochen ab Auftrags Italien 8680 € 167.52 € Schwenkrahmen 3120x27x0,9 mm 35/70 m/min 280 mm 240 mm 370x140 mm rund 225 mm, quadrat 215 Crsdpowirpvsfx Am Rsc rund 140 mm, quadrat 140 830 mm 1550 mm 1400 mm 1900 mm 353 kg manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment

Year of construction: 1998, condition: good (used), Maximum width of the workpiece 410 mm Cjdpfx Amjigwcns Rjrc Maximum height of the workpiece 410 mm Saw speed 10> 200 m / min Band saw length 41 x 1.1 x 5940 mm 8.7 kW power required Weight 4 tons Characteristics: - Torque Control: measures the torque required for the cutting operation. If the load is excessive, it immediately interacts with the hydraulic circuit to reduce the feed rate to optimal cutting conditions in relation to the cross-section of the material and the condition of the saw blade. - System 9000: allows the operator to select the cutting speed (feed motion) depending on the type of material being cut. At the same time, the feed speed (entering the material) adjusts automatically to generate the optimal chip thickness. Nevertheless, the operator has the option of adjusting the production rate to a specific application by increasing or decreasing it. - The efficiency of the devices mounted on the deb series machines allows the maximum use of the blade capabilities without exceeding them, which translates into long-term productivity and precision. Compucut PLC control

Year of construction: 2015, condition: good (used), Jocar Log Carriages, strong band line set consisting of: entrance transfer, half moons,Log Carriages whith Three fixed Headblocks model 30P900/SM/NR, mounted on a mechanical structure, desk with Mudata positioning system, all inside a closed cabin, exit roller train , Jocar band saw device model 1250/165/NR, with a diameter of 1250mm flywheels, bicut, the input transfer is 4 chains 12000mm long, the carriage is 3 towers ideal for wood cuts 1000mm minimum, since the distance It is from the first to the second 750mm and from the second to the third 1350mm, max length 3 meters, all Jocar machinery from the year 2015 Csdpfxelzgncs Am Rsrc