Used Bürkle 1-Cylinder Roller Coating Machine for sale (114,643)

Condition: like new (used), Year of construction: 2025, CARLO SALVI 476 SV revised to new 4,76x45 mm. 450 ppm Rcjdpjh N Di Dsfx Ab Ejd - New electrical system according to CE standards with inverter and PLC - New Lubrication System - New engine with disc, pulley and brake - New thread take-up roller pump - New belts - Rectification of all parts of the Central - Pins, Bushings and Nuts replacement - New bearings Available in CALOLZIOCORTE (LC) c/o HBR srl. HBR will provide to the total revision.

Condition: used, Year of construction: 1996, center height in crank: 1,100 mm, workpiece weight (max.): 80,000 kg, grinding length: 14,000 mm, grinding wheel diameter: 915 mm, grinding diameter: 2,000 mm, quill stroke: 200 mm, quill diameter: 260 mm, workpiece weight between centers: 80,000,000 g, workpiece diameter between centers: 2,000 mm, workpiece length between centers: 14,000 mm, power: 35 kW (47.59 HP), High capacity cylinder grinder with hydrostatic guides POMINI mod. HD 402/425 - year 1996 - maximum diameter 2000mm - working length 14000mm - tip capacity 80000 kg. Rcodpfjtxlyxsx Ab Esd Possibility of complete retrofit of the machine's electrical unit, manageable updates or modifications for application change. Grinder disconnected and ready for collection.

Condition: good (used), Year of construction: 2008, Mabeg Feeder SPS UV2 + C: UV Drying tunnel with material cooling Redpfxew Eb Uae Ab Eecd Automatic Stacker: SPS AUTOSTACK 2

Condition: used, 1-roller calibrator with 1000 mm conveyor Rsdpfx Abewx Ra Se Escd

Condition: good (used), A series of machines for a complete UV coating line. Rcodpog T U Unofx Ab Eed

Year of construction: 2010, operating hours: 50 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: OMMA HGS 314, Roller applicator for hot melt polyurethane adhesives. Usable working width: 1300 mm. Working thickness: from 3 mm to 80 mm. Working speed: from 5 to 25 m/min. Working temperature up to 140 °C. Adhesive applicator roller diameter: 250 mm. Installed power: 15 kW. Power supply: 400 V / 50 Hz / 3+N. Redpfxsxfb N Io Ab Eocd

Condition: new, Year of construction: 2022, I sell the new widebelt sanding machine Casadei Libra 45 RCT 110 Year 2022. Configuration: Steel moulding cylinder with spiral knives Combi unit hard rubber cylinder + segmented pneumatic jumping pad. Working width 1100mm Elektronic working height adjustment with digital readout 3-160mm 1 Motor 2 Feeding speeds. Programming of in/out jump of the pad. Sensitive adjustment of pad position. Rcodperddh Iefx Ab Eed Sensitive adjustment of cylinders position. Pneumatic adjustment of pad and cylinders pressure position. Pressure rollers for short elements. Air-blow for cleaning the sanding band. Condition NEW ! The machine was not working before. Available immediately. Including full documentation and CE.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, total length: 9,000 mm, working height: 120 mm, For sale: BARBERAN PUR-33-L profile wrapping machine (year 2010) – machine for laminating elements with decorative foil using PUR hot-melt adhesive (hot gluing). The machine features a single foil feeder, automatic control, and an added antistatic corona system (reduces electrostatic charges – improves foil feed stability). Technical specifications: Model: BARBERAN PUR-33-L Year of manufacture: 2010 Machine length: approx. 9 m Max. element width: 120 mm Feed speed: up to 45 m/min Power supply: 400V / 50Hz Rodpfx Absyw Nxkj Ejcd Foil feeder: 1 unit Equipment / additional features: Antistatic corona (retrofitted) – neutralizes foil static Printer – enables edge printing (e.g. strip name / operator / description) Glue melter with approx. 60L capacity – allows extended operation without interruption. Important: The machine applies PUR adhesive using hot-melt technology Heaters are NOT included in the set.

Condition: new, Year of construction: 2026, Automatic snap lock roof panel machine Sl-1 auto is designed by our company for the self-locking roof panels production in automatic mode. This machine forms a roof lock by rolling with the help of special rolling rolls. At the same time while rolling it cuts fastening holes for roof panel’s fixation. Automatic snap lock roof panel machine SL-1 auto consist of: - Roll forming part, which directly forms the desired profile of the panel with the help of rolling rollers. The machine is equipped with width easy adjustable system - to change the width; you just need to turn a special adjustment wheel. The rolling machine has 10 pairs of forming rolls to form a click-seam lock. It has special tool to cut fastening holes in panels. - Automatization system of machine, with the main elements as follows: automatic control panel, manual control panel, control cabinet, measuring wheel. With the help of this system, machine operator can program it to perform metal rolling and cutting operations in automatic mode. It is easy to set the number of panels for rolling and their lengths, so you just need to feed metal into machine, and it will roll panels of click-seam of the desired length and quantity in automatic mode. It is possible to perform several tasks (multi-tasking). If use manual control panel you can check each operation step of the automatic mode before put it to full automatic process. - Guillotine shear, designed for cutting click panels of various widths. The special configuration of blades makes it possible to cut such profile and to get high quality final product. Shear system has electric motor to make cutting operations easy. As an additional equipment for the machine, we offer: - metal uncoiler for convenient installation of roll metal and feeding it into the machine. - full automatic decoiler to make roll forming process maximum automatic. - ribbed panel rolls, to form additional ribs to the click-fold panels, so it gets more interesting look to the roof and increasing the rigidity of the system. Rsdpfen Hqmmox Ab Escd - ribbed panel forming machine RPFM (microwave panels machine) to form microwaves on roofing panels. Due to its low weight, the automatic roll forming machine for self-locking panels SL-1 auto can be used in the construction of civil and industrial facilities, in factory workshops and workshops, as well as directly on the roofing site. Using of machine close to the place of installation avoids transportation costs and the associated risk of damage to the roofing sheets. The high of snap lock roof panel profile when installed is 26mm: As an option, we can also make machine for 31mm lock high production: The maximum workpiece width for rolling can be 700mm. The minimum workpiece width is 250mm. Automatic snap lock roof panel machine Sl-1 auto has special protective cover that prevents foreign objects from getting to working part of machine. So snap lock automatic roll forming machine SL-1 auto is convenient to use with the help of automatic mode so you can minimize operator’s work and to get high-quality roofing panels with high productivity.

Condition: new, Year of construction: 2026, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. Rjdsuzv Tzjpfx Ab Escd After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: new, Year of construction: 2026, NEW Snap lock roofing panel roll forming machine SL-1 Snap lock roofing panel roll forming machine SL-1 is designed and manufactured by our company as one of the flagman equipment for metal roofing panels production. Following machine makes standing seam roofing panels with self-closing lock on sides (snap lock). The main advantage of such lock system is the easy way of installation: to connect two panels with each other you just need to cover bottom part with top part and press it with some force, you will hear specific click noise at this very moment. That is why name of system is self-closing lock one. Comparing to standard standing seam roofing panels with mechanical lock which you need to close with special tools or equipment, snap lock panels are much easier to install and don’t require additional expensive devices for work. To fix panels at the roof frame you can use standard self-tapping screws, to make it possible, while rolling machine makes special fixation holes on one side of roofing panels. Such simple product design also helps to save costs and make installation process easier, not spending money on clips purchasing, comparing to the standard standing seam metal roofing with mechanical lock installation. So standing seam roofing with snap lock is easier to install, does not require high skilled employees and cut expenses for additional machines purchases. Total high of panels - 31mm As per order, we can also make machine for 26mm panels high. Machine has 10 pairs of forming rolls. One of the rolls has special punching parts so can cut fixation holes at roofing panel for further installation operations. Cutting tools are made from tools steel with heating and polishing, so have longtime working period. Maximum metal width can be 700mm, minimum 250mm. Rcodpfx Asiuz T Isb Ejd Snap lock roofing panel roll forming machine SL-1 is width easy adjustable one, so to adjust machine from one panel width to another you just need to rotate special handle. Rolling length – unlimited Rolling speed (m/min.): about 7 As extra options, you can get: - cross cutting knife; - length measuring device; - ribbed panel rolls; As per customer preferences snap lock roll forming machine can be equipped with automatization system and electric shears for panels cutting. Standard supply set of self-closing lock roll former machine SL-1 includes safety covers to protect working parts of machine from foreign objects. Snap lock machine can work with various types of metal: galvanized steel, copper, aluminum, color coated metal, etc.

Condition: excellent (used), Year of construction: 2005, I sell the combined tunnel for surface finishing Superfici Elmag Combiline. Configuration: 1-head roller coater Cleaning unit with dust exhaust system 2-head UV-drying tunnel Cleaning unit with dust exhaust system Model: Combiline. Working width: 1500mm Year 2005. Working hours: 4600 mthrs. Total length: 5,30m Rjdpfx Aboiuc R Hj Eocd Total width: 2,40m Weight: 4000kg Available immediately. Fully working.

Condition: new, Year of construction: 2025, Dura fence metal automatic roll forming machine MPF-1 auto Dura fence metal automatic roll forming machine MPF-1 auto can be efficient solution for companies who decide to increase or start production of metal picket durafence planks. A metal picket fence is a type of profile that you can get by rolling flat metal through the rolling rollers of a machine with further use in the process of metal fences manufacturing and installation. A dura fence (euro picket fence) has an attractive look and can be perfect part of any design without cluttering it up or loading it with unnecessary elements. A dura fence will be an excellent solution for the construction of houses, cottages or any other buildings. Dura fence metal roll forming line MPF-1 is fully automatic and can proceed metal fence planks production process in fully automatic mode. The line consists of following parts Automatic metal decoiler can work with rolls weight up to 1.5 tons and coil width up to 350 mm. Decoiler helps to feed metal into a roll forming machine, so you need to install roll to unwinder shaft, to adjust inner diameter of the roll and put the metal under the compensation mechanism of the machine. After you have to take it to roll forming machine. As an option, we can also make a line and equip it with a manual metal unwinder or install a line without it at all. The rollformer part of the machine, consisting of rolling rollers of various diameters and configurations to roll metal and form the required profile. Guillotine shear for cutting final products of the machine. The guillotine works in automatic mode, giving the opportunity to cut fences with necessary length and quantity. Line automation system consist of a manual control panel, an automatic control panel and a stand with a display. The manual control panel allows you to set up the machine in manual mode and check it before automatic operation. The automatic control panel is used when the line is operating in automatic mode, allowing you to set the quantity and length of forming products and program their cutting with the line. Thus, using dura fence metal line MPF-1 auto, you can get a full automatic solution for the production of a metal fence profile, applying minimum efforts to production and receiving high-quality products with sizes and numbers you need. Specification: Rjdjtp H Erspfx Ab Eocd The material thickness maximum (mm) 0.55 Engine power (kW) 1.5+1.1+2.2 Rolling speed (m/min) 10-15

Year of construction: 2012, condition: used, Machine is in operational condition and recently taken from the operation. Machine is located in Estonia and is available to be shipped. Rcodsxm S Htjpfx Ab Ejd Ask for additional information!

Year of construction: 2008, condition: used, Operational condition machine! - 4 axes - Component height up to 100 mm - 3 valves Redpfjxlflgex Ab Eocd - 2 tilters for valve inclination - 2 tanks - External programming PC

Condition: good (used), Year of construction: 2004, Sakurai Front Pick up Automatic Suction Feeder Sakurai Aktiprint SK UV Dryer Rcodpfxsww Eilo Ab Ejd Sakurai Automatic Stacker Fully Cleaned

Condition: new, Year of construction: 2026, functionality: fully functional, It is a perfect complement to obtain the desired width product from the edged plates. While providing ease of use with its simple, compact and versatile designs, it can be integrated into the existing facility of any business thanks to its easy assembly. Rcodpjrzakmofx Ab Eed - Models with 120-160 mm cutting heights - Possibility to apply 2 or 3 saws to the movable and fixed sleeve - Manual or automatic feeding - Automatic fueling - Possibility to process 1000 mm wide products Optional equipment; - PLC controlled manual or automatic feeding - Up to 3 axis movable saw option - Removal of waste from the system thanks to separator arms - Cutting easily and in the most efficient way with the alignment arms. Technical Specifications Max. Cutting Height : 120 mm / 160 mm Min. Cutting Height : 15 mm Max. Cut Width : 800 mm Max. Working Width : 1000 mm Min. Cut Length : 800 mm Max. Feed Rate : 40 m/min Saw Rotation Cycle : 3000 rpm Upper Rollers : 2 x 240 Bottom Rollers : 5 x Ø135 mm (120)

Condition: new, Year of construction: 2025, Metal picket fence roll forming machine MFP-1 was designed by our company to produce semi-round shape picket metal fence profile. This profile is widely used and popular among companies with business in manufacturing, installation and selling of metal fences. The production of the profile goes gradually, at first hemming forms on edges from the flat metal, and then the height of the profile and the semi-round shape are formed, at the last stage of rolling machine forms the rib in the profile center. Such number of forming stages makes it possible to ensure smooth sheet changes during rolling, as well as high quality of the final product. As a blank, you can use a strip of required width and length, to prepare it with pre-cut on other equipment – sheet metal slitting machine or guillotine shear. After roll forming, to make fence picket end look better, you can use special cutting press of our production. The working tools of such press have special round configuration and are the same as semi-round metal picket shape to make appropriate cutting. Those tools are made from special tool steel, and goes through process of hardening so ensure high requirements for the cutting tools of the equipment. Our company can produce as semi-automatic rolling machine for the metal fence pickets manufacturing and a manual punching press for it, as well as a fully automatic line. Such metal fence automatic line can have following components: console metal decoiler, a rolling machine equipped with an automatization system with the ability to program the number of required pickets for rolling and their lengths, automatic electric shear for cutting metal at the end and stacker part. Rcedpfxsm Twnle Ab Esd Thus, cooperating with us, our customers can choose the best option for their manufacturing process according to their planned production volumes, budget, etc. For more details about metal picket fence roll forming machine MFP-1 please contact our sales department

Condition: used, machine/vehicle number: 007650, Max working width: 450 mm Max. machinable height: 120 mm Rcsdpfxju Evi Rj Ab Esd Gluing System: EVA Hotmelt

Condition: used, machine/vehicle number: 007649, Max working width: 600 mm Gluing System: EVA Hotmelt Rsdpou Eviqsfx Ab Ejcd

Year of construction: 2025, condition: new, Roller Conveyor Shotblasting Machine Sheet, Profile and Finished Metal Product Blasting Machine: It consists of Cabin, Turbine System, Conveyor System, Recycling System, Filtration System, Control Panel and Platform. Rcjdpfx Abovnrr Aj Eed Roller Conveyor Blasting Machines consist of Metal Sheet Shot Blasting Machines, Profile Shot Blasting Machines. Material is sent to the cabin on specially manufactured roller conveyor. The surface cleaned material is ready for the next process (painting, coating, etc.) at the cabin exit. It is used in sheet, NPI, NPU, Profile blasting processes. Ideal for rusting, roughening and cleaning before painting. The cabin is made of ST-37 sheet metal and blasting zone is supported by manganese wear plates. Hardox sheets have been added to the parts of the leggings that are close to the blasting zone. The wear plate cladding is screw-in design for future wear-based replacements. The side wear plate, top wear plate, front and rear wear plates, blades, impeller, control cage, steel shot feeding elbow of the turbines on the machine are made of Ni-Hard cast iron chemical composition. CODE W x H(mm) TURBINE SK - 1 1.000 x 500 4 x Ø 300 SK - 2 1.500 x 500 6 x Ø 300 SK - 3 1.500 x 1000 6 x Ø 400 SK - 4 2.000 x 500 8 x Ø 400 SK - 5 2.000 x 1000 8 x Ø 400 SK - 6 2.000 x 1.500 10 x Ø 400 SK - 7 2.500 x 1.000 12 x Ø 400 SK - 8 3.000 x 1000 16 x Ø 400 SK - 9 3,000 x 1.500 16 x Ø 400 SK - 10 4.000 x 2000 22 x Ø 400

Year of construction: 2025, condition: new, Gas Cylinder Shot Blasting Machine is a specialized industrial surface-treatment system used to clean, descale, and prepare gas cylinders (like LPG, industrial gas bottles) before repainting, refurbishing, or further processing. ✅ What It Does It propels steel shots at high velocity onto the cylinder’s surface inside an enclosed chamber. This process: Removes rust, old paint, and surface contaminants Provides a uniform roughened profile for better paint adhesion (surface preparation) Improves structural inspection accuracy (detecting dents, cracks, corrosion) Restores cylinders to safe working condition for reuse Typical configuration includes: Component Function Blast Chamber Containment of blasting process Blast Wheels / Turbines Propel abrasive media at high speed Work Handling System Conveyor, roller, or rotation devices for cylinders Abrasive Recovery System Collects used shots for recycling Dust Collector Removes blasting dust for environmental compliance Control Panel Automation & process monitoring Rsdpfx Abjxun T So Ejcd

Condition: new, Year of construction: 2025, workpiece weight (max.): 12,000 kg, turntable diameter: 280 mm, overall weight: 120 kg, The Robotmover 20 is the ultimate solution for moving heavy loads such as industrial machinery, installations, or steel structures – 100% electric, so zero emissions and noise pollution. Work with unparalleled flexibility thanks to the wireless remote control and the ability to effortlessly change direction 360°. This compact electric mover excels at maneuvering through tight spaces, making it an indispensable tool in congested or confined environments. Thanks to the 48V-60Ah battery, the Robotmover ensures long-lasting operation, saving both time and labor. Whether you're moving equipment or heavy loads, this electric Robotmover is your reliable partner that streamlines your work and increases productivity. Flexible Operation: The wireless remote control provides infinitely variable drive with 360° direction changes. Strong Traction: The two powerful 1000W motors equipped with magnetic brakes produce a robust pulling force of 20 tons. High Load Capacity: The triple-bearing turntable effortlessly carries a maximum load of 12 tons. Rcodpow I Rt Nsfx Ab Esd Long Battery Life: The 48V lithium-ion battery with a 60 Ah capacity provides 4-5 hours of use without frequent charging. Scope of supply: Robotmover 20, remote control, battery chargers Also available transport crate with garage, battery operated hydraulic jacks, fixed following rollers electric skates power skates machine mover robot mover jung lifting equipment hydraulic jacks

Condition: good (used), Year of construction: 1997, functionality: fully functional, Bürkle Multifoiler, membrane press Model BTF 1628/60 Year of manufacture: 1997 Line for laminating smooth and shaped MDF parts with thermoplastic films from roll or sheet, suitable for PVC, PP, high-gloss PVC, ABS films. Suitable for thermoforming and membrane process. Max. part size: 1250 x 2550 mm Part thickness: 6-35 mm Heating plate dimensions: 1600 x 2800 mm Max. heating temperature: 140°C Stroke: 230 mm Siemens control system Total connected load: 38 kW With 2 aluminium tables and reserve table Rcedpfxjznb Uis Ab Eed Weight: 16.5 t Press length: 2,550 mm Press width: 1,250 mm Max. workpiece thickness: 35 mm With pin table

Condition: ready for operation (used), Year of construction: 2019, Door panel postforming line Kraft / Costa / IMA / Bürkle / Homag Coating line consisting of: Gantry feeder Brand: Kraft Year of manufacture: 2019 Technical specifications - With vacuum lift - 2 feed roller conveyors - One transport roller conveyor for onward transport Wide-belt sanding machine Brand: Costa Type: KK7 CT CT 1350 Year of manufacture: 2018 Consisting of: Wide belt sander (sanding from below) Technical specifications - Contact roller - Electronic shoe sanding unit - Cleaning brush - Intermediate conveyor belt, length approx. 3000 mm Wide-belt sander (sanding from above) Technical specifications - Identical equipment Complete formatting, laminating, and postforming line Consisting of: Roller conveyor system Brand: Kraft Year of manufacture: 2019 Technical specifications - 3 individual elements - Centering station Double-end profiler Brand: IMA Type: FBA/II/740/A Year of manufacture: 2018 Technical specifications - Equipped with feed conveyor and alignment station - Scoring saw at the bottom - Splitter - Flazer - Prism cutter - Joining cutter - Cross-edge milling unit - 3 profiling milling units - Brushes Laminating system consisting of: Feed conveyor belt Brand: Kraft Year of manufacture: 2019 Glue applicator Brand: Bürkle Type: DAK1300 Year of manufacture: 1992 Technical specifications - With infeed table, manufacturer: Kraft - Steel platform with stairs and various pumps - Glue melting unit GWK Eco 03A Infeed Table for Laminating Machine Brand: Kraft Year of manufacture: 2019 Laminating Machine Brand: Bürkle Type: EKMH 1300 Year of manufacture: 1998 Technical Specifications - New Siemens Simatik KMG Touch control system - Bürkle GLK calender - Includes film holder and saw for trimming excess material - Working width 1300 mm - 2 GWK temperature control units - Column-mounted swivel crane for loading paper rolls - Unloading conveyor belt Postforming machine Brand: Homag Technical specifications - Infeed table - With 2 saw units (horizontal and vertical) - Intermediate buffer with 4 levels - Infeed to the postforming machine - 2 identically configured processing sides with gluing - PU pre-melting unit Nordson / VersaBlue, built in 2020 and 2004 - Pressure zone with turret magazine for various profiles - Various milling units and buffing brushes - 2 cooling units BEKO Bekoblizz LC, built in 2020 Rcsdpfxjy Dr Hqe Ab Esd Conveyor belt with inspection system - Swivel arm with vacuum suction cup - Inspection station for visual inspection of the workpiece Portal destacking Brand: Kraft Technical data - With vacuum portal and 3 destacking stations Automatic cross-transport cart Brand: Kraft Year of manufacture: 2018 Technical specifications - Roll width: approx. 1400 mm - Roll length: approx. 2800 mm Used door panel postforming line Kraft / Costa / IMA / Bürkle / HomagCoating line consisting of:Gantry feederBrand: KraftYear of manufacture: 2019Technical specifications- With vacuum lift- 2 feed roller conveyors- One transport roller conveyor for onward transportWide-belt sanding machineBrand: CostaType: KK7 CT CT 1350Year of manufacture: 2018Consisting of:Wide belt sander (sanding from below)Technical specifications- Contact roller- Electronic shoe sanding unit- Cleaning brush- Intermediate conveyor belt, length approx.