Used Balance Systems Digital Interface Srl 9Shvm2511T D120 - ! - for sale (40,252)

Condition: like new (used), Year of construction: 2025, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 100925, total width: 900 mm, total length: 1,600 mm, total height: 1,900 mm, maximum load weight: 200 kg, heating capacity: 12 kW (16.32 HP), tank capacity: 600 l, warranty duration: 12 months, type of input current: three-phase, inner dimension height: 500 mm, inner dimension length: 1,200 mm, inner dimension width: 600 mm, input voltage: 380 V, input frequency: 50 Hz, year of last overhaul: 2025, power: 12 kW (16.32 HP), operating pressure: 6 bar, Equipment: CE marking, documentation/manual, Ultrasonic cleaning machine with a pneumatic platform Pieces to be cleaned besides ultrasonic action are continuously moved up/down so that to increase the result Itjdpfx Amsxmhckolof All controls for safety working are automatized by PLC Maximal insulation and insonorization against ultrasonic noise Usefull platform dimensions: mm. 1.200 x 600, maximal piece height: mm. 500 Full stainless steel AISI 304

Condition: new, Year of construction: 2025, operating hours: 4 h, functionality: fully functional, machine/vehicle number: 281225, total width: 900 mm, total length: 4,500 mm, total height: 2,500 mm, heating capacity: 12 kW (16.32 HP), warranty duration: 12 months, type of input current: three-phase, inner dimension height: 400 mm, inner dimension length: 600 mm, inner dimension width: 500 mm, compressed air connection: 6 bar, input voltage: 380 V, input frequency: 50 Hz, year of last overhaul: 2025, Equipment: CE marking, Robotic multi-stage ultrasonic washing machine Useful internal tank dimensions: mm 600 x 500 x 350h Usable tank capacity: 100 liters Supplied baskets: mm 550x400x280h Ultrasonic power: 3000 watts Ultrasonic frequency: 33 kHz PZT elements: 32 Heating: 16 kW (4+4+4+4) Voltage: 380V, three-phase, 50 Hz Power consumption: 14A Load per basket: 8 kg PLC for detergent liquid level, temperature and ultrasonic power control Full noise insulation Insulation with volcanic rock wool Entire construction in AISI 304 stainless steel Tank sheet thickness: 2 mm (20/10) WORK CYCLE - Loading of baskets onto motorized platform - Pre-wash with hot detergent - Washing with ULTRASOUND - Rinsing with hot running water - Washing with ULTRASOUND - Rinsing with hot running water - Protection in special cold or hot liquid Isdsxv U Ifjpfx Amlstf - Drying with heated and ventilated air - Unloading of basket onto motorized platform

Condition: new, PRICE: 1900 EUR Spiral dough mixer Isdpfjx U Efbjx Amlstf Container capacity (capacity): 60 liters Spiral mixers are intended for professional use in the field of bakery and catering They are used for the preparation of primary dough, but can also be used for the preparation of other types of products, replacing manual work with a mechanical system In this way, it is possible to produce larger quantities of dough continuously They consist of a bowl for ingredients and a mixing tool (spiral) They have a digital control panel with a display, two independent electric motors with two speeds and counter directions that move the vessel and the spiral, as well as a built-in timer Specification of Spiral Mixer single phase Bowl Capacity: 60 liters Electric Power: 3kW Machine Size: 840x480x1000mm

Year of construction: 2004, condition: good (used), coil, coil edge guide brake load cells Iodpfx Amemmc Uieljtf 12 holographic spool unwinders hot stamping unit cooling suction hood with collection bag boiler refrigerator electrical panel operator panel

Year of construction: 2026, condition: new, Description: The FR8 flotation tank is designed for density-based separation of plastics in recycling washing lines. The machine separates floating materials from sinking contaminants, improving material purity before further washing, drying, or granulation processes. Suitable for continuous industrial operation 24/7. Materials: PE, PP, HDPE, LDPE, plastic flakes, films Features: Itsdpfxoyh Hx Ee Amlef Effective density separation (float/sink process) Heavy-duty industrial construction Continuous operation for recycling lines Easy cleaning and service access Ready for integration with pre-washers, friction washers, and dryers 📩 Available in customized configurations. Contact us for details.

Year of construction: 2026, condition: new, functionality: fully functional, The PR8 pre-washer is designed for intensive pre-washing of plastic waste in recycling lines. The machine removes sand, soil, and mechanical contaminants, preparing material for further washing stages. Suitable for continuous 24/7 industrial operation. Materials: PE, PP, HDPE, LDPE, plastic films, post-production waste Technical data: Iedpfxjyh Hr Es Amljtf Capacity: up to 2000 kg/h Drive power: 30 kW Rotor length: 3000 mm Rotor diameter: 680 mm Dimensions (L x W x H): 3689 x 1766 x 3294 mm Inlet opening: 500 x 450 mm Features: Heavy-duty industrial construction Replaceable wear parts Easy service access Ready for integration into complete washing or recycling lines 📩 Available in customized configurations. Contact us for details.

Condition: as good as new (ex-display), Bacciottini Group OXO MULTI SKILL, machine from showroom. OXO MULTISKILL is a compact creasing and folding machine with automatic non-stop loading feeder With few simple operations OXO MULTISKILL can switch from a normal creasing machine to a creasing/folding unit. Once in the folding machine mode after the fold type, sheet length and paper thickness have been selected, the machine adjusts automatically ready for production. Additional supplementary creases can be added along with ones necessary for the folding of a product. It allows a quick tool change over from the creasing to perforating just in a few seconds. TECHNICAL FEATURES: Minimum size in creasing: 8×10 cm | folding: 8×15 cm Maximum size in creasing and/or in folding 50×70 cm (with optional extension feeder 50×100 cm) – minimum and maximum size can change depending on the kind of fold Itjdpfsv Rbkmsx Amlof Sheet weight in creasing: from 80 to 600 g.s.m. in folding: from 80 to 400 g.s.m.; from 0.08 mm to 0.4 mm of thickness – variable according to the quality of the paper Min. distance creasing 0.1 mm between creases | 0.1 mm from front edge | 0.1 mm from tail edge Production A4 in creasing: 9,000 sheets per hour (with 1 crease.) | in folding: 9,000 sheets per hour (with a single fold) Maximum number of creases 40 – possibility of doing a greater number of creases than those necessary to fold the sheet Power supply 400 Volt three phase + Neutral 50 Hz 4 Kw This machine from showroom is equipped by a standard V-shape creasing kit. All other optional tools are available and can be added to its equipment: -digital creation kit -standard perforating kit 2/1, 3/1, or 4/1 -micro perforating kit -extension feeder 100 cm

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 21011109, total height: 1,200 mm, construction height: 1,200 mm, lifting height: 5,100 mm, empty load weight: 4,700 kg, load capacity: 3,000 kg, overall weight: 4,700 kg, total length: 5,000 mm, total width: 2,500 mm, table width: 2,500 mm, input voltage: 400 V, type of input current: AC, platform width: 2,500 mm, power: 4 kW (5.44 HP), New machine never used, very sturdy construction, available immediately. Complete with clarification of conformity issued by the manufacturer. Itedpfx Asudi D Nemlof

Year of construction: 2022, condition: new, The fabric filter unit consists of one or more insulated compartments containing rows of fabric bags in the shape of round, flat or shaped tubes, or pleated cartridges. The particles contained in the exhausted air move along the surface of the bags, then radially through the fabric. The particles are retained on the upstream face of the bags and the clean gas stream is discharged to the atmosphere. The filter is operated cyclically, alternating with relatively long filtering periods and short cleaning periods. During cleaning, the dust that has accumulated in the bags is removed. Fabric filters collect particles ranging in size from submicron to several hundred microns in diameter with efficiencies generally greater than 99 or 99.9 percent. The layer of dust, or cake of dust, collected on the fabric is primarily responsible for such high efficiency. The cake is a barrier with tortuous pores that trap particles. Iedpfxsibd Azs Amletf

Year of construction: 2022, condition: new, Electrostatic filters are considered the most sophisticated technology, currently available, for the collection of solid and liquid particles existing in an exaust air flow. The electrostatic uptake allows the separation of any particle from the air, regardless of its size. In fact, the agglomeration of very fine particles is possible with efficiencies up to 99% on atmospheric dust according to the EN 779 method.The use of electrostatic filters therefore allows to obtain air completely free of dust , smoke, spores, bacteria, pollen ecc . The main advantages deriving from the use of electrostatic filters are: • High filtration efficiency • Low pressure drops • Low operating cost • Limited maintenance interventions Isdpfx Amoh Aku Tjljtf • High operating reliability

Year of construction: 2022, condition: new, machine/vehicle number: XXXX, Baffle spray scrubbers are a technology for air pollution control. They are very similar to spray towers in design and operation. However, in addition to using the energy provided by the spray nozzles, baffles are added to allow the gas stream to atomize some liquid as it passes over them. Ijdpjh Akn Usfx Amljtf

Year of construction: 2022, condition: new, The packed bed wet scrubbers is designed to remove gaseous or vaporous pollutants from an air stream. The process is accomplished by contacting the contaminated air stream with a scrubbing liquor that absorbs or chemically reacts with the pollutants. The cleaned air is then discharged to the atmosphere and the contaminated scrubbing liquor is either disposed of in the approved can be recovered and reused in the original on other processes. In the vertical counter-current design, gas flows upward while scrubbing liquid flows down through banks of sprays. The absorption of gases takes place in the scrubbers random packing section and scrubbing liquid is introduced into a liquid through or spray distribution system. A high-efficiency mist eliminator removes entrained liquids. Clean gas go directly in the atmosfere . Itjdjh Apkdepfx Amlof

Year of construction: 2022, condition: new, The Venturi Scrubber is a device that generally consists of a centrifugal part capable of separating the solid parts from the liquids and of a Venturi column that narrows in the middle section to vary the pressure and therefore allow the polluting solid particles to fall through the fumes. This type of Scrubber is used for the removal of dust and pollution present in corrosive and dangerous industrial gases. Venturi Scrubbers are used in the abatement of particulates that come from coal, oil or wood boilers, the textile industry but also for emissions from the chemical industries, wood industries, paper mills, etc. Itodjh Atp Aepfx Amljf

Year of construction: 2022, condition: new, Kairos Engineering's energy recovery system is a technology that recovers the heat contained in the industrial hot wastewater, to transfer it to other water to be put back into the production process. The transfer takes place by means of shell and tube heat exchangers in which the two fluids, which never meet directly in order not to undergo contamination, they are sent against the current, that is, one against the other. Indicative savings of 30%. Iedpfxsh Akv Hs Amlotf

Year of construction: 2022, condition: new, The Cyclonic Dust Separator (cyclone) exploits the centrifugal and gravitational force to carry out the dedusting of the air flow. The tangential entrance of the machine forces the air to whirl around inside the structure. The contained dust loses speed due to friction with the external surface of the system and is separated thanks to the gravitational effect. The air is released in the central part in correspondence with a counter-duct which, creating a depression, attracts the air inside and allows it to escape. Iedpfxeihu T To Amljtf

Condition: used, Year of construction: 2002, machine/vehicle number: 19711, functionality: fully functional, power: 4.5 kW (6.12 HP), cutting height (max.): 2,200 mm, saw blade diameter: 294 mm, overall weight: 1,050 kg, cutting length (max.): 5,300 mm, collet bore: 30 mm, The vertical panel saw features a solid and compact structure to ensure stability during operation. This configuration allows for consistently high cutting quality, even on large or particularly challenging materials, delivering smooth and linear movements for safe and efficient work. Iodpfx Ajwqmyrsmletf The machine is supplied with 29 blades, each with 50% remaining service life. Transport not included.

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 0 h, machine/vehicle number: plate roll, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: MG EVO, controller model: EVO 4 AXIS, number of rollers: 4, roller (bottom) diameter: 140 mm, roller (top) diameter: 160 mm, side roll diameter: 150 mm, roller diameter: 200 mm, roller length: 2,050 mm, working width: 2,000 mm, working height: 700 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, overall weight: 2,200 kg, total length: 3,200 mm, total width: 1,100 mm, total height: 1,200 mm, power: 4 kW (5.44 HP), input voltage: 400 V, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4 ROLL BRAND MG ITALY, HYDRAULIC MODEL M2006P EVO_CNC PLATE BENDING ROLL PLANETARY DESIGN DOUBLE PINCH PRE-BENDING CNC_EVO PROGRAMMABLE AUTOCALCULATION AUTOMATIC PLATE ROLLING Capacity: -Width of plate: 2000 mm -Thickness of plate rolling 6 mm -Thickness of plate pre-bending 4 mm Rolls -useful width mm. 2050 -Top roll mm. 160 - Lower roll mm. 140 Configuration installed: • Surface hardening of the four rolls, smooth finishing suitable for stainless plates rolling • Dual pre-pinch, with adjustable force upon the input of plate thickness • Conical bending hydraulic attachment - hardened contrast pad. • Power driven rolls rotation top/bottom gearbox axial direct drive hydraulic each roll. • Calibration system for re-rolling of welded shells rounding. • Console electric independent with centralized commands joysticks and CNC screen readout. • CNC controller on touch screen 15” , CAD/CAM interface 4 axis auto calculation software package. with digital readout of the axis for use in manual rolling, semiautomatic and fully automatic programmable. • Opening front side hydraulic drop-end to unload closed shells. Itsdpow Dnd Sofx Amlof • Variable working speed step-less axis interpolation. • Safety installation with emergency stop. • Instruction manuals for operation and service.

Condition: refurbished (used), Year of construction: 2021, functionality: fully functional, actuation type: electric, control type: PLC-controlled, degree of automation: automatic, PELLET PRODUCTION PLANT 2 TON/H COMPLETE WITH BELT DRYER Itjdjw Ebx Sspfx Amlsf

Condition: repair required (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 103-20 ` 104-20, total height: 1,900 mm, total width: 3,400 mm, total length: 4,100 mm, type of input current: three-phase, Equipment: documentation/manual, We are offering for sale two identical apple slicing machines with a shared feed tank and feed line. These machines are suitable for processing various types of fruit, including apples, pears, peaches, nectarines, persimmons, oranges with peel, kiwis, and pineapples. They can be used for cutting into ring slices, segments, and chunks, with or without coring, and are also suitable for producing whole cored fruits such as apples, pears, peaches, nectarines, and more. Iodox Sx Azepfx Amletf The machines are therefore perfectly suited for preparing fruit for the drying industry, confectionery and baking industry, fresh fruit salads, the snack industry, or fruit preserves. The design is simple and highly versatile, enabling rapid changeover between ring-slicing, segmenting, chunking (with or without coring, depending on the particular fruit), or coring only, according to your production requirements. The machines also allow quick adjustment of slice thickness, segment number, chunk size, and coring diameter. Constructed entirely of AISI 304 stainless steel, the machines can be integrated inline with other processing equipment. Round fruits can be automatically fed, singulated in the loading area, and transferred onto a stainless steel conveyor equipped with an automatic orienting system, which aligns each fruit inside dedicated tray recesses (the automatic orienting system is suitable for apples, peaches, nectarines, and persimmons without leaves). Other fruit types are manually placed onto the stainless steel conveyor. In the slicing section, the machinery delivers a sharp and precise cut that does not affect organoleptic qualities, ensuring maximum hygiene and product quality. Fruits are processed into rings, segments, or chunks, and/or cored, using interchangeable cutting units that allow variation in slicing dimensions and coring diameter. The sliced products are transferred onto a discharge belt conveyor. Fruit cores are separated below the working area, where a conveying belt (not included in the standard supply) can be installed to carry cores to a collection container. All safety guards feature easily removable, quick-release interlocked hinges, allowing safe, rapid maintenance and thorough cleaning.

Condition: good (used), N2 Clamping Squares made of G25 cast iron with a lamellar structure. Isdetyyl Ejpfx Amljtf With a vertical plane, machined either with T-slots or zero point, orthogonal to the support base according to DIN 875 standard, DIMENSIONS 1595x1000x850mm milled to DIN 876/II, with T-slots 22H12 DIN 650 at a pitch of 175mm

Condition: used, Year of construction: 2021, YEAR OF MANUFACTURE 2021 MAIN ENGINE 60 HP (45 kW) Itsdpfx Asyaplbjmljf CUTTING HEIGHT 120 mm CUTTING WIDTH 400 mm

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Washer for plastic cans and bags Brand: Boldt Systems Model: W 400.4.3.1 Serial number: BW0 04 122 Year of manufacture: 2005 Steam heated Stainless steel mesh belt Belt width: (3x) 380 mm Iodjwxy Hzopfx Amlstf Overall dimensions: 6000 mm x 2100 mm x 2400 mm

Condition: new, Year of construction: 2025, The multi-blade or double arbor circular saw SQUALO 420 is a technologically advanced, easy-to-use, precise, and highly reliable machine. It is essential in a modern sawmill for optimizing the production of sawn timber. Ideal for the production of battens, squares, sawn timber, profiles, trimmed boards, prisms, slats, and pallet components. SPECIAL PRICE, OFFER OF THE MONTH UNBEATABLE PRICE Iodpfx Amjx Urucslstf

Condition: used, functionality: fully functional, Year of construction: 2014, The printer was rarely used and was located at a university. It is no longer in use. Iedjw Inpnjpfx Amletf

Condition: used, Year of construction: 2003, Fully functional ready to use. Please check out our other listing as well Itsdpfx Ajwt R Dmjmlef