Used Winter Feedmax 48-Easy for sale (10,580)

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Kedpfow Sgnkox Ablenc Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, power: 37 kW (50.31 HP), input voltage: 380 V, input current: 80 A, input frequency: 50 Hz, pressing force: 220 t, stroke length: 200 mm, operating speed: 21 mm/s, reverse speed: 200 mm/s, table width: 120 mm, table length: 4,270 mm, table height: 900 mm, throat depth: 400 mm, ram plate length: 4,270 mm, distance table to ram: 400 mm, clearance between the columns: 3,820 mm, oil tank capacity: 350 l, total length: 5,370 mm, total width: 2,160 mm, total height: 3,275 mm, overall weight: 16,950 kg, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic press brake LVD EASYFORM-10 220/4270 Touch-B Year of manufacture: 2010 Serial number: 33189 Technical specifications Force: 2200kN Working length: 4270mm Knsdpfez Eqwljx Ablec Distance between uprights: 3820mm Stroke: 200mm Distance table – ram: 400mm Gap: 400mm Turbo: PP5400 Approach speed: 120mm/s Working speed: 21mm/s Return speed: 200mm/s Weight: 16950 kg Motor: 37kW Oil capacity: 350 COMMAND CONTROL TOUCH-B • Table PP8170 V-axis • EFL 90/130 • Top tool clamping PP3090 – Wila • Back gauge X600 X’ R Z1 Z2 PP8096 • Safety: CE PP3580 – laser-safe • PP1115 manual front support: 2pcs • T-axis Heavy duty 200kg

Condition: like new (used), functionality: fully functional, Year of construction: 2026, operating hours: 44 h, Winter service vehicle EGHOLM Park Ranger 2155 with warranty, cabin, reversing camera, heated mirrors, LED headlights, air-suspended seat Cobo SR 840, adjustable backrest, cup holder, liquid wax coating, DAB+ radio, front sweeper shortened to 1 meter outer width of the machine, all-wheel drive, spreader, parking support. Knedpfoz I Hlqex Abljc Immediately available, only 44 operating hours. Price: €49,900.00 plus VAT.

Condition: used, Hohner Stitching Head Set 2x48/5S The Hohner 2x48/5S stitching heads provide a precise and reliable solution for professional stitching tasks in printing and finishing operations. This set of two stitching heads enables efficient and high-quality production of brochures, booklets, and other bound printed materials. Key Features - Compact Design: The Hohner 2x48/5S stitching heads are the narrow version of standard stitching heads, with the "S" in the model name indicating a more compact design - Precision and Reliability: Hohner stitching heads offer high precision and reliability, making them ideal for professional stitching tasks - Versatility: Suitable for the production of brochures, booklets, and other printed products requiring sturdy stitching Knsdezwl Ilspfx Abloc - Compatibility: In addition to Horizon, the Hohner 2x48/5S stitching heads can be used in saddle stitchers from various manufacturers such as Duplo and Bourg Specifications - Stitching Wire: Round wire No. 24-26 (0.6 – 0.5 mm) - Maximum Stitching Thickness: Up to 5 mm - Minimum Staple Spacing: 48 – 54 mm (depending on stitching thickness) - Quantity: 2 stitching heads in the set All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25SFERA08, Mobile stretch winder ATLANTA SFERA Easy TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Knsdjz Ipdcepfx Ablec Wrapping height “machine with MAST (pallet included) 2000 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE Brake can be adjusted manually from the carriage by means of a tension roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless stretch film Standard connection values: 230 V - 1L+N+PE - 50 HZ Optionally available: -winding height up to 2400mm -FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" 200% -FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM SLIDE TYPE “PS” (POWER STRETCH) 120-400% -Automatic line formation to strengthen the winding .Automatic system for cutting the film in 3 strips for “BANDEROLL WRAPS” - Machine version for temperatures down to -5° C -BATTERIES LITHIUM RELION 2 x 12V Other systems available from the Ludwigsburg warehouse. Illustration similar.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Lybra02, LYBRA EASY / 3 programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2200mm Max. pallet dimensions: 1,200 x 1,200 mm Rotation arm using high resistance ball bearings Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations A positioning aid for correctly placing the pallet is included in the scope of delivery Safety bumper for collision protection Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F62 - Ergonomic height for film change Knjdez Iprtepfx Abljc ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 3 storable wrapping programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application Soft start cycle to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally available: FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE via electromagnetically braked roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2 kW / 6A - 1.75 kW / 8.5 A (with PRS / PS) Optionally available with a manual line formation. Other systems available immediately from the Ludwigsburg warehouse.

Condition: used, mileage: 582,402 km, power: 368 kW (500.34 HP), first registration: 08/2019, fuel type: diesel, empty load weight: 8,069 kg, maximum load weight: 9,931 kg, overall weight: 18,000 kg, tire size: 315/60 22,5, tire condition: 50 %, axle configuration: 4x2, wheelbase: 3,600 mm, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, number of beds: 1, Year of construction: 2019, operating hours: 582,402 h, front tire size: 315/60 22,5, rear tire size: 315/60 22,5, Equipment: ABS, air conditioning, cabin, cruise control, differential lock, fog lights, navigation system, onboard computer, parking heater, sliding door, spoiler, truck registration, Reference no. for inquiries: 41525 MAN, TGX * Year of manufacture: 2019 * ABS, Anti-lock Braking System * EBS, electronic brake system * Power windows * Cab Knedpfsz I Igcjx Ablec * Automatic climate control * Air suspension * Navigation system * Retarder / ZF-Intarder * Power steering * Sleeper cab * Heated seats * Auxiliary heater * Cruise control * On-board computer * Differential lock * Digital tachograph * USB interface * Distance assist * Lane keeping assist * OBU preparation * Refrigerator * Electric windows and mirrors * 2 bunks * 2 x diesel tank * AdBlue tank * Roof spoiler * Fog lights * Comfort suspension seat * Multifunction steering wheel * Sun visor * Transmission type: Automatic * Suspension: Air / Air * Gross vehicle weight: 18,000 kg * Unladen weight: 8,069 kg * Payload: 9,931 kg * Permissible total weight: 18,000 kg * Tire condition, front axle: 60% - Tire size: 315/60 R22.5 * Tire condition, rear axle: 40% / 40% - Tire size: 315/60 R22.5 * Wheelbase: 3600 mm * Tire sizes: 315/60 R22.5 * Rotating beacon * Light bar with laser lights * Auxiliary air conditioning * Tire size, front axle: 315/60R22.5 * Tire size, rear axle: 295/60R22.5 * 48-ton total vehicle weight Disclaimer: Subject to changes, prior sale, and errors. You can find more pictures and videos on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Quick and straightforward financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, paintwork, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transport of commercial vehicles Please contact our trained staff; we will be happy to advise you.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 3,253 h, load capacity: 4,000 kg, lifting height: 13,530 mm, fuel type: diesel, mast type: telescopic, construction height: 2,450 mm, power: 56 kW (76.14 HP), fork length: 1,200 mm, drive type: Diesel, Telescopic forklift, rigid frame Load center: 500 Mast type: Telescopic Condition: Ready for use and fully functional Technical condition: very good Front tire type: Pneumatic Rear tire type: Pneumatic Description: MANITOU telescopic forklift MT 1440 EASY, year of manufacture: 2021, 3253 operating hours according to the meter. Load capacity: 4000 kg, lifting mast: telescopic, lifting height: 13530 mm, overall height: 2450 mm, fork length: 1200 mm, tires: pneumatic, engine: 4-cylinder Deutz diesel with 55.4 kW power - Stage V. Fork positioner, cabin with heating, radio and air conditioning, level adjustment, road traffic lighting, work lights, rotating beacon, 3 steering modes. Kjdpfx Abjz Hg Nasljnc VERY GOOD CONDITION!! NEW SERVICE!! Fork positioner, Cabin with heating, radio and air conditioning.

Condition: excellent (used), functionality: fully functional, power: 47.81 kW (65.00 HP), overall weight: 3,500 kg, fuel type: diesel, color: orange, fuel: diesel, gearing type: hydrostat, Year of construction: 2023, operating hours: 139 h, Equipment: air conditioning, all wheel drive, HOLDER C65 SC Municipal utility vehicle with winter service equipment Accessories: 1. KUGELMANN VS150/74 Vario wedge snowplow with a maximum clearing width of 150 cm 2. KUGELMANN Duplex salt spreader with control panel This HOLDER C65 SC utility vehicle was first commissioned at the end of 2023 and has only 139 operating hours according to the meter. It is in very good overall condition with only minor signs of wear. Service recently performed. Knjdpfx Abez Dwbhsljc - Net price €71,344 // Gross price €84,900 - Inspection/test drive is possible - Shipping can be arranged nationwide; the costs depend on the distance! - We would be happy to have our leasing partner prepare an attractive leasing/financing offer for you!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 7,896 h, load capacity: 4,800 kg, lifting height: 4,670 mm, free lift: 1,620 mm, fuel type: electric, mast type: triplex, construction height: 2,400 mm, battery capacity: 805 Ah, battery voltage: 80 V, fork length: 1,600 mm, tire condition: 70 %, front tire type: superelastic tires (black), front tire size: 250-15, rear tire type: superelastic tires (black), rear tire size: 21x8-9, overall weight: 7,090 kg, total height: 2,400 mm, total length: 2,930 mm, total width: 1,500 mm, fuel: electricity, Equipment: cabin, sideshift, LINDE E 48 P – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 4.800 kg Lifting height: 4.670 mm Closed height: 2.400 mm Free lift: 1.620 mm Mast: Triplex (3F467) Fork length: 1.600 mm Fork carriage: 3 Drive: Elektro 80V Battery: 80 V / 805 ah. Charger: Dreiphasig 80 V Tyres: Superelastik SE 250-15 (70%) / 21x8-9 (50%) Service weight: 7.090 kg Length: 2.930 mm Width: 1.500 mm Year of manufacture: 2007 Operating hours: 7.896 h Ksdpfxez Ap Dhe Ablsnc Condition: working condition EQUIPMENT 3rd valve, 4th valve, Rear work lights, Front work lights, Heating, Full cabin, Pulse control ATTACHMENTS Sideshift, Fork positioner Internal no.: 1309297 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, High Speed Elevating Rail Vertical Boring Machine with Power Indexing Turret & Copying Attachment. Kedpfxszy Ik Ie Ablonc Four Jaw Chuck Size 48" Diameter. Table Swing 60" Diameter. Max Height Under Cross Slide 60" Turret Rise & Fall 36" Speeds 10.5 - 234 rpm With 4 Sets of Chuck Jaws, Equipment, Chuck Guards & Newall Digital Readout System.

Condition: used, mileage: 66,904 km, power: 125 kW (169.95 HP), first registration: 10/2024, fuel type: diesel, empty load weight: 2,130 kg, overall weight: 3,500 kg, wheelbase: 3,665 mm, fuel: diesel, color: white, driver cabin: other, gearing type: automatic, emission class: euro5, number of seats: 3, Year of construction: 2024, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, second-hand vehicle warranty, sliding door, soot filter, traction control, XZ1 Model Generation 1, JB7 Parking Package with reversing camera, F2W Winter Package, E1E Digital Extra: Hard Disk Navigation, EY2 Live Traffic Information, E7M MBUX Multimedia System, G43 9G-TRONIC automatic transmission, H15 Heated passenger seat, H16 Heated driver’s seat, W54 Rear doors, double-wing, opening up to the sidewall, E07 Hill Start Assist, LA2 Light Assist, JA8 Crosswind Assist, MJ8 ECO Start-Stop Function, XY5 Model Year 5, J65 Outside temperature display, C6L Multifunction steering wheel, JK5 Instrument cluster with color display, MS1 Cruise control, JF1 Rain sensor, F64 Electrically folding exterior mirrors, F68 Heated and electrically adjustable exterior mirrors, FU5 Exterior mirrors without indicators, T77 Grab handle entry for sliding load compartment door at partition, T16 Sliding door right, L13 Fog lamps with cornering light, IR4 Wheelbase 3665 mm, SA5 Driver’s airbag, SA6 Passenger airbag, E1D Digital Radio (DAB), S23 Double passenger seat, AR2 Axle ratio i = 3.923, S22 Armrest for driver’s seat, S87 Low driver’s seat box, SB3 Comfort suspension seat driver, D03 High roof, E46 Socket in driver’s cab, D50 Continuous partition, IL5 Left-hand drive, RF9 Tire brand Goodyear (90), RS3 Steel wheels 6.5J x 16, L65 Ceiling light(s) load/passenger compartment with door contact, FF4 Overhead storage compartment, LE1 Adaptive brake light, BA3 Active Brake Assist, JB4 Lane Keeping Assist, JW8 Attention Assist, FZ5 Anti-theft alarm system, LG7 LED High Performance Headlights, EY5 Mercedes-Benz emergency call system, JA7 Blind Spot Assist, JA9 Traffic Sign Assist, IT4 3.5-ton model, KP7 SCR Emissions Control Generation 4, E1B Smartphone storage incl. wireless charging, FF5 Storage above windscreen, FJ4 Storage under dashboard, Q67 Rear towing eye, 805 AEJ X4/1, XM4 Acoustic package, V3L All-weather floor mats, W73 Rear door step, IC1 Series C907 / C910 Sprinter, IE0 Series C907 VS30 RWD, L44 Side indicator lights front, VK8 Plastic flooring, XO5 Digital operating manual, EW6 Digital Extra: Remote Services Plus, T85 Entry grab handle rear left corner pillar, T86 Entry grab handle rear right corner pillar, E57 Trailer socket electrics, MT5 Emissions class Euro 5b+ N1, CB7 Chassis: Stabilization Level I, M72 HVO capable vehicle Note: Despite careful checking of all our price listings, errors do sometimes occur. Some may be caused by data transmission issues across different platform providers’ systems; we cannot exclude mistakes on our part either. Thus, all information is provided without guarantee and does not represent a legal claim. A price label cannot be considered a contract component. If you particularly value a certain equipment feature listed in our advertisement, please let us know upon conclusion of the contract. Thank you for your understanding! Knodpfx Absy Nfausloc

Condition: excellent (used), Year of construction: 2025, Demonstration machine Strapping machine, Easy Strapper model 12mm strap Frame size 850x600 Ksdoydf Duspfx Ablonc

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, workpiece weight (max.): 10 kg, empty load weight: 1,550 kg, borehole diameter: 28 mm, table length: 2,000 mm, table width: 1,200 mm, TECHNICAL DETAILS Bore diameter: 28 mm MIG/MAG adjustment range: 20 - 500 A Wire feed speed: 0 - 22 m/min Welding table: 2000 x 1200 mm Number of controlled axes: 6 Workpiece weight: 10 kg MACHINE DETAILS Power capacity: 25 kVA Duty cycle at max. current (40°C): 50 % Current at 100% duty cycle (40°C): 410 A Machine weight: 1,550 kg EQUIPMENT Easy ARC 01.02 FD-B6 Welbee P500L welding robot station Torch RTW5000H Ksdpfx Aoygw Nbeblonc Welding robot type FD-B6 Steplessly adjustable control switches

Condition: used, functionality: fully functional, machine/vehicle number: #1039, Year of construction: 2019, operating hours: 2,500 h, load capacity: 3,500 kg, lifting height: 12,550 mm, fuel type: diesel, mast type: telescopic, construction height: 2,420 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Chassis number: #1039 Kedpey Up Hpsfx Ablonc Mast type: telescopic Transmission: hydrostatic Condition: Ready for operation and fully functional Technical condition: good Sideshift, 3rd valve, 4th valve, rear work lights, front work lights, heater, particulate filter, full cab, exterior mirrors, windshield wiper, 20 KM/H, CE certificate

Condition: good (used), Year of construction: 2015, CNC milling machine, milling and engraving machine, MECANUMERIC, MECA EASY 1510 – used: Price ex works: €23,500 (net)! Manufacturer: MECANUMERIC Type: MECA EASY 1510 Year of manufacture: 2015, former DEMO MACHINE Three-axis milling machine in a flat-bed gantry design. Working travels X, Y, Z axes: 1,050 / 1,550 / 200 mm. Table frame and gantry: Designed as a solid, stress-free, fully welded steel structure, powder-coated. Heavy table substructure for mounting the vacuum table VAC-CAISSON, designed as a cassette, with air passage holes in a 10 mm grid. Feed rate: 300 mm/sec (18 m/min) in rapid traverse and feed mode! Guidance on rails, slide shoes with upstream ball screw. Transmission: Precision ball screws Ball screw on all axes Maintenance-free, brushless servo drive motors (750 W on X and Y, 300 W on Z) Repeat accuracy: +/- 0.025 mm Mechanical resolution: 0.0006 mm Numerical control: Mecanumeric CN 7000 ISO-G-Code Machine operation via a 10" touch screen display Complete documentation and CE declaration of conformity in accordance with the basic safety and health requirements of Ksdpfxezbybij Abljnc Vacuum table 1,020 x 1,500 mm Support/work table designed as a closed aluminum plate, on which vacuum passage holes are arranged in a 10 mm grid. The table is divided into 2 main areas, which can be switched on manually. Vacuum generation by one (1) two-stage high-performance vacuum side-channel compressor. Motor power 4.5 KW, suction capacity 320 m/hour, filter and silencer included. Due to the overall size and potential heat development, the pumps are housed outside the machine body. The electrical control and safety devices for the pump and valves are integrated in the machine control cabinet or on the control panel. Milling spindle HF40-ATC24 ENC Conversion Module APSG-A Vacuum generation by one (1) two-stage high-performance vacuum side-channel compressor. Motor power 4.5 KW, suction capacity 320 m/hour, filter and silencer included. Due to the overall size and potential heat development, the pumps are housed outside the machine body. The electrical control and safety devices for the pump and valves are integrated in the machine control cabinet or on the control panel. High-frequency motor milling spindle 4KW Power: 4KW Speed range: up to 24,000 rpm. Fast tool change with pneumatic ejection, ISO30 taper. Tool holder: Clamping diameter up to 2-16 mm. Cooling with compressed air 6 bar 20 m/h Converters and switching elements are included in this position. Safety enclosure for the machine Front with door and safety lock - Position PROTCHOC omitted - Preparation of the electrical control and switching elements as well as the output socket for a high-performance industrial vacuum cleaner. Changer CH 6 S Condition: good Available: immediately Location: Delmenhorst

Year of construction: 2015, condition: used, This listing is for 2015 Cedrex Fluid X xsd-48 Pro Automated Tube Decapper The unit is in full working condition and ready for immediate use This automated tube decapper is a robust system designed to provide accurate and consistent performance for high-throughput sample management and storage workflows. Manufactured by Cedrex, this reliable unit is an excellent addition to any modern facility processing sample tubes at scale. Transparency Report and Technical Audit: Kedpfx Aezqf Hhsblonc Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5000x2900x2100 mm Weight 2900 kg Total power requirement 24 kw Kodpfjv A E Utox Abljnc

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3300x2100x2100 mm Weight 1500 kg Knodpfov A Hakjx Ablsc Total power requirement 14 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3300x2100x2100 mm Weight 1500 kg Total power requirement 20 kw Kodpfx Abev A Haqoljnc

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3300x2320x2100 mm Knodpfx Abev A Hawjlsc Weight 2000 kg Total power requirement 14,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1500x1100x1500 mm Knodpfxev A Hb Ie Ablsc Weight 300 kg Total power requirement 3,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 8800x2900x2100 mm Knedpfjv A Hcrex Abljc Weight 6500 kg Total power requirement 18-36 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2700x900x1900 mm Knsdpjv A Hcxjfx Ablsc Weight 800 kg Total power requirement 3,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1280x2120x2050 mm Weight 1950 kg Knsdpov A Hfgofx Ablsc Total power requirement 21 kw