Used Wiemers R1950 for sale (218)

Condition: excellent (used), Offered here is a heavy, well-preserved cold circular saw from the company Trennjäger. Data: Saw blade: 275 x 2.5 x 40 T8 = Z110 Fsdpfxog Rxh Dj Afkjgc Two speeds Angle adjustment: from 90°-0 Equipment: Hydraulic vice hydraulic feed (infinitely variable) Integrated coolant system

Condition: good (used), Year of construction: 1992, Travel X-axis: 1500 mm Travel Y-axis: 420 mm travel Z-axis: 400 mm clamping surface: 2 x 700 mm x 420 mm max. table load: 800 kg Fsdecph Tmopfx Afkogc number of tools: 0 2 x 36 pieces tool holder: SK 40 gr. feed: 25 m/min weight: 9 t area required: 6,50x4,5x3,1 m small speed: 50 rpm big speed: 7500 rpm stepless rapid traverse: 25000 mm/min control: Siemens Sinumerik 820 M GA 3 + 2 x single axis stepper motor control Sama SFI present clamping system: per place 1 NC dividing head with counter bearing, carrier plate, rotary distributor and hydr. clamping and 4-fold dividing head with rotary distributor in special design and sep. NC control Clamping system: 4-fold dividing head consists of 4 -2 jaw chucks, clamping pressure 12bar Make: Hofmann HMR 4/kombi 294/4 Tool breakage control Meutrsuix ATM B310 Renishaw probe system (without probe) Coolant system with sparger, filter system and fine filter

Year of construction: 1995, condition: used, machine/vehicle number: 4141, Emulsion maintenance trolley FA-300/U Blotenberg, filter unit -WT 114- Offered here is an emulsion care trolley/emulsion filter of the company Blotenberg. Technical data: Manufacturer: Blotenberg Saugsysteme Type: FA-300/U Motor power: 0,25kW/ 220V / 3,1A Year of manufacture: 1995 Flow rate: 300l/h Serial number: 4141 dimensions: 1000 x 900 x 450mm Suitable for: Emulsion Coolant Cleaning solution Wet cutting machine tools Parts washers Fjdpfxslf D Ugs Afksgc Mode of operation according to the manufacturer: The emulsion maintenance cart continuously draws in the contaminated emulsion mixture, separates the substances and returns the cleaned emulsion to the machine. All this is done purely physically - no spinning or centrifuging.

Year of construction: 2001, condition: good (used), machine/vehicle number: WAG737, Size: 630 x 630 mm Threaded holes according to DIN 55201 Available: 5 pieces Fgsdpfx Afoddxd Teksc

Condition: used, functionality: unexamined, total length: 8,200 mm, total height: 750 mm, total width: 450 mm, conveyor belt width: 400 mm, ejection height: 700 mm, -KOM 1561- Offered is a well-maintained scraper conveyor with high discharge. All further data and dimensions can be taken from the pictures. Note: The unit is located in our warehouse and can be inspected under power. The hinged belt is in good condition. Fsdpfsyvh I Isx Afksgc

Condition: used, functionality: unexamined, conveyor belt length: 2,200 mm, conveyor belt width: 500 mm, total width: 550 mm, total height: 1,500 mm, -KOM 1609- Fgodpfx Aeyvf Uqofkjc We offer here a scraper belt conveyor from the company Ocmar Torino Italia. The machine can be inspected and electrically tested at our warehouse. We supply several chip conveyors. We will be happy to provide you with a package price.

Condition: used, functionality: unexamined, conveyor belt width: 400 mm, total length: 1,900 mm, total width: 450 mm, total height: 1,400 mm, ejection height: 1,200 mm, -KOM 1604- We are offering two identical scraper belt conveyors here. The price is per conveyor. Dimensions can be taken from the images. Fgjdsyvf Nzepfx Afkjc The machine can be inspected and tested under power at our warehouse. We stock several chip conveyors. We are happy to provide you with a bundle price as well.

Condition: used, functionality: unexamined, total width: 300 mm, conveyor belt width: 290 mm, -KOM 1550- Offered here is a magnetic belt conveyor. The technical data can be found in the images and on the nameplates. Fgjdpfx Afoyvfqloksc Note: The chip conveyor is available from our stock and can be inspected under power. Motor: Manufacturer: SEW Eurodrive Type: R43-VU01

Condition: good (used), functionality: fully functional, power: 0.37 kW (0.50 HP), motor manufacturer: SEW Eurodrive, Equipment: type plate available, -KOM 3157- Offered here is a magnetic belt conveyor from CHEMAPERM. The motor of the magnetic belt conveyor has been tested and is fully functional. Dimensions can be taken from the pictures. Specifications of the magnetic belt conveyor: Manufacturer: ChemaPerm Type: 62942 Year of manufacture: 1978 Motor specifications according to nameplate: Manufacturer: SEW Eurodrive Fodpjxrcktjfx Afkogc Type: SA47 D171D4 Power: 0.37kW Revolutions/min: 1380/37

Condition: used, functionality: unexamined, total length: 1,600 mm, total height: 1,500 mm, total width: 460 mm, conveyor belt width: 400 mm, ejection height: 1,290 mm, -KOM 1606- We offer you a scraper conveyor here. The machine can be viewed at our warehouse and tested under power. We have several chip conveyors for sale. We would be happy to provide you with a package price as well. Fgedpfjyvfnqjx Afksc

Condition: used, total length: 2,100 mm, total height: 1,500 mm, total width: 650 mm, conveyor belt width: 620 mm, ejection height: 1,000 mm, -KOM 1607- We are offering you here a scraper belt conveyor from May – Fran GMBH Essen. Dimensions can be found in the attached sketch. Fsdpfoyvfi Isx Afkegc The machine can be inspected and tested under power at our warehouse. We offer several chip conveyors and would be happy to provide you with a package price.

Condition: used, functionality: unexamined, machine/vehicle number: 4059/74, General / technical data: well preserved chip conveyor & high discharge for CNC lathe or similar machines Remark: The equipment is in our stock and can be inspected under power. The hinge is in good condition. Fsdpfx Aegg Sbvofkjgc

Condition: like new (used), functionality: fully functional, Year of construction: 2025, overall weight: 370 kg, power: 3.5 kW (4.76 HP), input voltage: 400 V, input frequency: 50 Hz, broaching length: 800 mm, broaching speed: 3 m/min, total length: 920 mm, total width: 800 mm, total height: 1,950 mm, Manufacturer: Rausch (Haan/ Rhld) Model: RS 3 G/800 Machine No.: 2968/424 Year of manufacture: 1970 Weight: 370kg Overhaul: 8/2025 by Wiemers AG Our Ref. / Machine No.: WAG 787 General / Technical Data: Unused, overhauled mechanical vertical broaching machine by Rausch Pulling force: 3,000kg (30kN) Broaching speeds: 3m/min and 6m/min Return speed: 3m/min Maximum stroke: 800mm Maximum tool length: 1,000mm Table size / working surface: 340mm x 220mm / 430mm x 310mm Table opening: Ø 90mm for standard broaching mandrels Workpiece diameter: unlimited (without spray guard cabin) Dimensions (h x w x d): 1,950mm x 820mm x 900mm (h = table height from floor without attachments) Motor: 3.5kW Power supply: 400 Volt / 50 Hz Accessories / Special Features: - Modified drive system with geared motor and toothed belt drive - 2 broaching speeds: 3m/min & 6m/min - External stroke adjustment, cross-machine reproducible tool length adjustment system - Integrated coolant unit with check valve and drain cock, including selector switch for automatic operation (does not automatically switch in swivel mode) - Patented coolant/lubricant swivel system - Three-sided enclosed, front-open spray guard cabin (no external operator panel) - Machine enclosure below the safety door with chip guard and tool storage area - Electrical cabling within steel protective conduits - Electrical jaw monitoring (tool removal control to prevent unintended retraction of the pull bridge) - Safety door with integrated emergency stop function - Control panel made from stainless steel sheet with permanent marking - 4 central lubrication points for the trapezoidal spindle drive - Machine documentation Fgsdpfx Ajytvyxjfkec Remarks: The machine is fully overhauled, with the frame completely refurbished. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals replaced - Central drive shaft is new - Coolant system (pump, check valve and drain cock), including coolant/lubricant swivel system, is new - Jaws are new (pull bridge additionally reinforced) - A switchable jaw monitoring system has been installed (additional safety for operators and to prevent tool breakage) - A safety door with interlock has been installed instead of the rubber reach-in protection - Tool length adjustment system relocated outside the machine compartment - Additional limit switches installed - Complete electrical system (control cabinet) with Siemens components is new - Control panel made of stainless steel with durable labeling - New geared drive motor (SEW) with toothed belt drive - Machine has been repainted with 2-component structural paint The machine is stored at our warehouse and can be inspected under power.

Condition: good (used), functionality: fully functional, Year of construction: 1992, main lifting speed: 12,000 mm/min, fine lifting speed: 2,000 mm/s, -KOM 3160- Offered here is a Demag industrial lifting crane. This crane can lift loads up to 80 kg. In addition to the crane, you will receive the corresponding motor unit including the chain hoist, consisting of the chain and hook block. The dimensions can be found in the last image. The inspection logbook will be provided upon purchase. Type: PM V8 V1 F6 Year of manufacture: 1992 Fgsdpfxexcnmno Afkec Number of load strands: 1 Main lifting speed (m/min): 12 Fine lifting speed (m/min): 2 kW: 0.2 / 0.03 Protection class: IP 54

Condition: good (used), functionality: fully functional, -KOM 3163- Offered here is a lifting crane from Abus. The crane can lift up to 80 kg. In addition to the crane, you will receive the corresponding motor unit including the chain hoist, consisting of the chain and the hook block. Dimensions can be found in the last picture. You will receive the inspection logbook upon purchase. Fodpfxjxcnxqj Afkogc Unfortunately, the nameplate is no longer available.

Condition: good (used), functionality: fully functional, -KOM 3161- Fjdpfx Afjxcnvpskjgc Offered here is a Demag lifting crane. The crane can lift up to 80 kg. In addition to the crane, you will receive the corresponding motor unit including the chain hoist, consisting of the chain and hook block. The dimensions are shown in the last picture. You will receive the inspection book upon purchase. Unfortunately, the nameplate of the drive unit is no longer available.

Year of construction: 1982, condition: used, Processing units: from 3 sides Fgsdpfx Afjcqydrjkec Machine has 6 stations: with horizontal main axis Remarks: Mainly suitable for fine boring parts, but also for valve parts and shaft parts which have to be machined from two sides.

Condition: used, Year of construction: 1979, Drilling capacity: 35 mm Mounting type: MK 4 Feed rate: 0.04, 0.07, 0.10 ,0.14, 0.26, 0.40 Speeds: 63, 125, 180, 250, 355, 500, 710, 1400 Digital display in Z: 720 mm Cross table:x= 460 y= 280 mm drilling capacity in GG 20: 45 mm with cam control Cross table Fgjdpfxobn R Ale Afkjc

Year of construction: 1984, condition: used, gr. grinding Ø: 40 mm small grinding Ø: 5 mm weight: 0,9 t 2 grinding wheels with flange 8 collets 1 coolant tank mechanical feed with fixed stop Fgsdscq Rv Uepfx Afkec The cardan shaft for the workpiece drive is worn out

Year of construction: 1975, condition: used, General / technical data: used machine, speed via flat belt drive with 3 steps Fgjdocu I Exopfx Afkjc speed range 700 rpm, 1400 rpm, and 2800 rpm quill stroke: 90mm quill diameter : 35mm Pillar diameter : 60mm Throat : 200mm Mounting : Drill chuck direct mounting Table area 380mm x 300mm Dimensions : approx. 720mm x 480mm x 750mm Weight : 60 kg Remarks : first-class running of the drilling spindle, three-phase connection, solid industrial design, year of construction approx. 1975

Condition: not inspected (used), Rotary pump (Pu 115) lenght/width/height: 1,15m x 0,40m x 0,65 m weight: 165kg Motor Power: no info rpm: 1400 Fedpfxod Nd Ukj Afkogc Capacity range: 36 Hm : 30

Year of construction: 1993, condition: good (used), machine/vehicle number: 03.2370, Arthur Klink - internal broaching machine (WAG 748) machine type: internal vertical hydraulic broaching machine manufacturer: Arthur Klink Fgjdpfx Aecc D Ddjfkjc type: RISZ 10 x 1000 built in: 1993 stroke: 1000mm pulling force: 10.000KG working stations: 3 PCs drive: hydraulic system equipment: coolant system, magnetic chip conveyer remark: machine under power in stock the machine has an automatic workpiece loading system for 2 workpieces, ideal useable for high production Optional accessories available on request: tools, workpiece holder Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke.

Condition: excellent (used), Somex max 2 drilling unit Manufacturer: Somex Model: Max 2 Spindle carrier: place sleeve ø 12 mm kW: 0.37 V: 380-420V / 220-240 V A: 1.1 / 1.9 Fjdped Huvyefx Afkogc Rpm: 2820 Hz: 50 There are a total of 3 pieces. The above price is per piece.

Condition: used, machine/vehicle number: 3254, used honing machine Fodpfx Afokt Nnvskogc make NAGEL type VS 8 - 35 max. stroke = 350 mm throat = 250 mm Distance table - spindle = 800 mm Bore diameter = 24 - 150 mm

Condition: excellent (used), Offered here is a water cooler generator from the company Lennox. LENNOX chiller 400 V without condenser for indoor installation two cooling circuits capacity: 153 kW R 407 C low mileage dimensions H x X W x D: 1750 x 1500 x 650 mm Fgjdeg Uv Ayspfx Afkjc For technical data please refer to the nameplate.

You will receive a proper invoice with VAT. The price is incl. VAT.
We have more various interesting things for sale. Please have a look at all our ads.
If you are interested or have any questions, please contact us via the message function!