Used Würth Prebomat Ii for sale (2,060)

Condition: excellent (used), Mahr Here we offer you a Helio-Pan II. Max. workpiece weight 30 kg at a center height of 100 mm 80 kg at a center height of 150 mm Measuring range, length: 0 mm to 700 mm Measuring range, outer diameter: 0 mm to 120 mm Max. measurable throw: 100 mm Center height: 100 mm Measuring blades/probe and caliper: 1 mm x 5 mm Dimensions (W x D x H) Machine: 2060 mm x 920 mm x 1750 mm Controller box: 600 mm x 800 mm x 2200 mm Weight: approx. 900 kg Gjdpfezd R U Dsx Ahmobr Electrical power: 230 V / 1200 W / 50 Hz Air pressure: 6 bar Type: Helio-Pan II 700 Scope of delivery: (See image) We will gladly answer any further questions you may have over the phone. Written orders can be placed via email or fax.

Condition: excellent (used), DOUBLE-SIDE EDGE BANDER Edges (band in rolls) thickness (Min/Max) mm 0.3 / 3 Edges thickness in stips / lippings (min/max) mm 0.8 / 12 Panels thickness (min/max) mm 8 / 60 Working width (min/max) mm 274 / 3300 Numerical Control ICOS OPEN Feeding speed (adjustable) m/min 6 - 30 Without Transmission bar (Master & Slave system) Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (KW 4.5 x2) Free space Glueing Unit (Hot Melt Glue) 04.1570 Band Pressure zone Edge coils supporting unit (reels N°) 2 Snipping (end-cutting) unit 08.42 (KW 0.66 x 2) 0°-25° Fine Trimming unit 08.055 (KW 1 x 2) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (KW 0.66 x 2) Profile edge scraping unit 08.519 Glue scraping unit 08.50 Spraying Unit (for polishing liquid) Buffing unit 08.612 Gsdod Rcigspfx Ahmjbr Free space (to add a Grooving Milling Unit)

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) max mm 1,0 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 (266) / 3300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x Kw 6,6) Free space EDGE-BANDING PART (for each side): Gbodpfewz Ic Ajx Ahmor Lamps to heat the workpieces side Glueing Unit (Hot Melt glue) 04.1570 Pressure zone Edge coils supporting unit (No. of reels) 2 Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) 30 m/min (0°-25°) Rough Trimming unit 08.0555 (1 x Kw 0,66) Multi Function Unit (Profile contour Trimming unit) MFA 08.342 (2 x Kw 0,66) SERVO - 20m/min Profile Scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.617-2 (2 x Kw 0,18) Milling grooving unit: 75.30 (2 x Kw 4,4)

Condition: reconditioned (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 0,4 / 1 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 / 1300 Numerical Control / Software ICOS open (windows XP) Adjustable feeding speed (m/min ) 10 - 50 Without Transmission bar (Master & Slave system) SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Hogging Units (2 x Kw 8) EDGE-BANDING PART (for each side): Glueing Unit (EVA-Hot Melt + Quick Melt Unit) 04.1570 + 283.205 Edge coils supporting unit (No. 6 reels) SERVO-DRIVE guillotine shear (cutting the edge/band) Pressure zone (N.C. adjustment) Fine Trimming unit 08.055 (Kw 1 x 2) 0°-30° Profile Scraping unit 08.519 Glue scraping unit 08.50 Gbodjyypi Uopfx Ahmjr Buffing unit 08.617-2 (2 x Kw 0,18) Spraying Unit (for polishing liquid) Milling grooving unit 08.190 (1 x Kw 4,5) 0°-90° / 180°-270°

Condition: reconditioned (used), Double side - Stand-alone Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 0,4 / 1 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 / 3300 Numerical Control / Software ICOS open (Windows XP) Without Transmission bar (Master & Slave system) Adjustable feeding speed (m/min ) 7 - 35 Distance (center-axes) of the Disappearing Dogs (mm) 270 SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Milling unit (joint Trimmer) 08.379 (2 X kW 4) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) VTG + 283.205 Pressure zone (N.C. adjustment) + Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit 08.42/30/B (2 X Kw 0,66) Max 30 m/min Fine Trimming unit 08.055 (Kw 1 x 2) 0°-30° Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 30 (1 x Kw 0,5 ca.) 30 m/min Profile Scraping unit 08.519 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (2 x Kw 0,18) Gedpfx Asyyya Dehmsbr

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 / 1300 Numerical Control / Software ICOS Open (Windows base) Without Transmission bar (Master & Slave system) Adjustable feeding speed (m/min ) 10 - 50 Safety and sound-proof enclosures/cabins "Hopper Feeder" (panels fall directly onto the feeding chains) Distance (center-axes) of the Disappearing Dogs (mm) 270 SIZING PART (for each side): Godpfeum Untex Ahmsbr Spraying unit (Anti-sticking liquid) Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x Kw 6,6) Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) 04.1570 + 283.201 Pressure zone Edge coils supporting unit (No. of reels) 6 Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) 30 m/min (0°-25°) Fine Trimming unit 08.055 (2 x Kw 0,66) 30 m/min Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (2 x Kw 0,18) Free space

Condition: excellent (used), 4-SIDES LINE of Sizing-Edge Banding and Drilling, composed of the following machines: A) Loader (portal/bridge) double pick-up station "IMA" with central motorized rollers conveyor. With 2 external on-ground roller ways to in-feed the piles (stacks) of panels to the Loader. B) 1st Double-side Sizing & Edge Bander "IMA" Mod. Combima/N/II/230/A/R3 (mm 1300) C) Turning Station "IMA" (from lengthwise to crosswise) with double cone system. D) 2nd Double-side Sizing & Edge Bander "IMA" Mod. Combima / II /740 / B / R3 + (mm 3300) With KFA 30 (multi-profile copying Unit for fine-trimmimng and corner rounding) E) Drilling machinee "IMA" Mod. I-Magic (with 2 horizontal units + 4 bottom vertical unitsi) F) Motorized rollers conveyor "IMA" Gjdpfx Ahsyyb Suemebr G) Turning Station "IMA" (from lengthwise to crosswise) with double cone system. H) Stacker (portal/bridge) double stacking station "IMA" with central motorized rollers conveyor. With 2 external on-ground roller ways to out-feed the piles (stacks) of panels from the Stacker

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 + in stips / lippings (max mm 1) Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 (266) / 3300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 (Master & Slave) Safety and sound-proof enclosures/cabins SIZING PART (for each side): Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x Kw 6,6) Max 35 m/min Milling unit (Joint Trimmer) 75.186 (1 x Kw 4,4) EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt system) VTG 3-24 + 283.203 Pressure zone + Edge coils supporting unit (No. 24 reels) Snipping (end-cutting) unit 08.42 / 30 / B (2 x Kw 0,66) 30 m/min (0°-25°) Rough/Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° (30 m/min) Gbedpfxsxggzlo Ahmjr Multi Function Unit (Profile contour Trimming unit) MFA 08.342 (2 x Kw 0,66) SERVO - 20m/min OPTIONAL: KFA 30 Profile Scraping unit 08.519 Glue scraping unit 08.521 Buffing unit 08.604 (Kw 0,25 x 4) No. 2 Grooving units 08.190 (1 x Left-hand + 1 x Right-hand) (Kw 4,5 x 2) swivelling 90°/180°/270°

Condition: used, Year of construction: 2006, Stamping Press Manufacturer: Schuler Pressen GmbH & Co. KG, Göppingen, Germany Type: SAL 250-1.9 Mark II Serial number: A/260156 (Machine No. 2006-260156) Year of manufacture: 2006 Press force: 2,500 kN (250 tons) Stroke rate: 80–400 strokes/min Drive power: 51 kW at 2,000 rpm Ram stroke: 30 mm Ram adjustment: 100 mm Ram lift: 75 mm Installation height (table plate to ram, ram stroke bottom, ram adjustment top): 550 mm Table dimensions: 1,950 x 1,060 mm (as per drawing) Ram face: 1,950 x 800 mm (as per drawing) Compressed air: 5.5 bar Total weight (excl. feed): 48,000 kg Control system: SYS PACO 8000 Sound-insulating enclosure (orange) Strip Feed Unit Gbsdpozil S Iofx Ahmer Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Type: KRS 18.260/19-2000.2H-BF1 Serial number: 40 871 Year of manufacture: 2006 Connected load: 15.5 kW Supply voltage: 400 V, 50 Hz Decoiler Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Model: 18 260-1000.2 Serial number: 40 466 Year of manufacture: 1984 Connected load: 8 kW Supply voltage: 380 V, 50 Hz

Condition: used, max. load . kg 0 . 0 weight . kg The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us Morehe tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If Godpfezkvvajx Ahmjbr than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 2023, condition: like new (used), functionality: fully functional, Thermo Scientific Safety Workbench MaxiSafe 2030i. Class II. 3-filter configuration. Segmented stainless steel work surface. 4x 230V power outlets. Interior lighting. UV lamp left/right. Cable feedthrough: 8cm (diameter). Gsdpfxswurkqe Ahmsbr Interior: stainless steel. Front flap: folding + motorized. Filter box. External dimensions HxWxD: 223x190x88cm. Internal dimensions HxWxD: 77x180x60cm. Working height: 76cm. Display with touch control panel. Arm supports. Unused. Net purchase price: €19,401.61. Purchase date: 04/2024.

Condition: used, mileage: 115,000 km, power: 75 kW (101.97 HP), first registration: 02/2020, fuel type: diesel, overall weight: 2,635 kg, next inspection (TÜV): 02/2028, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 4,956 mm, total width: 1,920 mm, total height: 1,881 mm, loading space length: 2,512 mm, loading space height: 1,290 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Beautiful and well-maintained Opel Vivaro L2H1 long wheelbase panel van, 75 kW, with Würth workshop fittings and optimal equipment for trades and businesses. Vehicle is from first owner. 2-zone automatic climate control with pollen filter Alarm system 3 seats (double passenger seat, multifunctional) Driver assistance systems: - Cruise control - Rear view camera - PDC Park Distance Control / parking assist system front and rear, optical and acoustic display - Blind Spot Information System (BLIS) - Hill start assist - Driver fatigue detection - Automatic headlight control - Automatic windshield wipers - Brake assist - ABS, ASR, ESP On-board computer Audio Pro with color touchscreen - Media: radio, Bluetooth music streaming, USB Gjdpfszq A E Ujx Ahmsbr - Mirror Link, Android Auto, Apple CarPlay - Hands-free system for mobile phone with Bluetooth Electric windows Electrically adjustable, heated, and folding exterior mirrors Central locking with remote control Fog lights Front airbags for driver and passenger Spare wheel and jack Vehicle has a speed limiter of 130 km/h Rear double doors without glazing, opening angle 180 degrees Sliding door in the cargo area, right side Body: L2H1, long wheelbase panel van Wheelbase 3275 mm Floor covering in the cab: plastic Steering wheel adjustable Driver's seat with fold-out armrest, adjustable in several ways: - Seat height, backrest, lumbar support 6-speed manual transmission Heat-insulating glazing Cargo area fittings: Würth workshop fittings (similar to Aluca, Bott, Sortimo). Left side with shelving unit including shelf compartments, storage compartments, 3 drawers. Right side with shelving unit including storage compartments. Cargo area partition without window. Robust wooden floor. Special fastening rails (in the floor, on the ceiling) and eyelets are available for securing the load. 2 tensioning rods are available. Additional LED interior lighting. Walls partially lined with hard fiberboard. Mounted tires: Continental winter tires 215/60 R 17 on steel rims with approximately 7 mm tread depth in the front and approximately 8 mm in the rear. Service booklet maintained, history: 02.2022 / 23,052 km Inspection + oil change 02.2023 / 45,580 km Inspection + oil change, fuel filter - air filter - interior/carbon filter 12.2023 / 68,329 km Oil change 04.2026 / 115,217 km Inspection + oil change, fuel filter - air filter - interior/carbon filter - brake fluid, drive belt - AT clutch renewed Despite careful processing, input and data transmission errors may occur in the vehicle description including images. Errors and prior sale reserved. The vehicle can be inspected by DEKRA or TÜV if desired.

Condition: ready for operation (used), A Hwacheon CNC lathe is offered. Max. turning diameter: 680mm, swing over bed: 900mm, max. turning length: 1986mm, chuck diameter: 380mm, max. bar capacity: 116mm, max. spindle speed: 1800rpm, spindle power: 37kW/30kW, max. spindle torque: approx. 3071Nm/2493Nm, tool turret: 12 stations, tool interface: BMT-75, X/Z-axis travel: 360mm/2050mm, X/Z-axis rapid traverse: 18m/min, coolant tank capacity: 300l, control: Fanuc 0i-TF. Equipment: C-axis, driven tools, automatic in-process tool measurement, programmable tailstock and programmable quill, C-axis spindle clamp, chucking pressure monitoring, centralized lubrication and hinge-belt chip conveyor with chip container. Control ON: approx. 15961h, machining time: approx. 4258h, total part count: 34601. Weight: approx. 15000kg. Documentation available. Inspection possible by appointment. Gbodpfxoznc Rrs Ahmsr

Condition: used, maximum load weight: 29,352 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2017, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 3,050 mm, loading space volume: 102 m³, Equipment: ABS, VEHICLE NUMBER: 2814 EXTERIOR EQUIPMENT: * Galvanized frame * Sliding tarpaulin, neutral, without lettering/stickers * Additional tarpaulin tensioner at the front * Steel corner supports at the front and rear * Sliding roof Schmitz Safety Roof (Edscha) * Lifting roof with stanchion lifter * Body with adjustable height at the front: 7 x 50mm / at the rear: 4 x 50mm * Ferry equipment for solo/unaccompanied transport * Reinforced HD frame at the front * Underrun protection, bolted, FERRY type with sliding skid * Trailer information system Smart-Board with axle load display * Tarpaulin rope Gbjdpfxswibi Sj Ahmor * Steel rear impact guard * Document box TECHNICAL FEATURES: * Rotos axles with disc brakes * Air suspension with anti-roll bar on the first axle * Tires 435/50 19.5 * Tread depth in mm: 1st axle: 11/11, 2nd axle: 8/8, 3rd axle: 7/7 * Lashing points in the outer frame * Lashing eyes: 7 pairs of 2 tons and 11 pairs of 5 tons * Pallet stop on both sides * Certificate for load securing EN 12642 Code XL, Daimler 9.5, beverages * Reinforced cargo floor * EX/II approval * Unladen weight 6,648 kg * Fifth wheel height 925mm * TÜV/MOT: 12/25, Next inspection: * Example lease-purchase: €279 per month, term 36 months, 10% down payment (can also be your used vehicle), 10% final payment. * Delivery to your location possible. Trade-in/Leasing/Financing. We can make it happen!

Condition: good (used), Year of construction: 1970, Rail track gauge: 900 - 1680mm Max. wheel tread Ø: 1300mm Min. wheel tread Ø: 650mm Max. axle length wheel set:2350mm Min. axle length wheel set:2050mm Max. clamping Ø: 1050mm Min. clamping Ø: 700mm Face plate Ø: 1400mm Speeds / ranges: 31,6Rpm Number of slides: 2 Sjablone copy attachment: 2 Power: 90kW Length: 5400mm Width: 3600mm Gbsdpfx Ajwvkb Rehmsr Height: 2900mm Weight: 56000kg

Condition: ready for operation (used), Year of construction: 2007, operating hours: 8,794 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 575 mm, overall weight: 4,380 kg, controller manufacturer: MAZATROL, controller model: Matrix NEXUS, number of axes: 2, Horizontal turning machine manufactured in 2007. This Mazak QUICK TURN NEXUS 200-II features a maximum turning diameter of Ø 350 mm and a turning length of 550 mm. It is equipped with a chuck size of 200 mm and a maximum spindle speed of 5,000 rpm. If you are looking to get high-quality turning capabilities, consider the Mazak QUICK TURN NEXUS 200-II machine we have for sale. Contact us for further details. • Control: Mazatrol Matrix NEXUS • Chuck Size: 200 mm (8") • Maximum Turning Diameter: Ø 350 mm • Maximum Turning Length: 550 mm • Machine Weight: 4,380 kg • Tool Eye (Tool Setter): Yes • Coolant System: Currently not functional (coolant/water cannot be added) • Additional optional Accessories: Chip Conveyor, various clamping jaws included Gbedozg Dz Aepfx Ahmer • Machine On Hours: 24,079 h • Spindle Hours: 8,794 h Technical Specification Counter Spindle Yes Driven Tools No

Condition: used, Optical encoder Manufacturer: Heidenhain Type: OZA II 02 - 6 Device number: 2739 Mounting distance: 14.30 Gbodpecifpmsfx Ahmer

Condition: reconditioned (used), Year of construction: 2008, Wachtel Piccolo II bakery oven - used - year of manufacture 2008 Gbodpjzi A A Refx Ahmor - electric - 4 chambers, 1.2 x 0.8 m - manual control - steam generators for all chambers - power 25 kW - oven on a mobile base - unit after refurbishment - price on request

Condition: used, functionality: unexamined, Ferwood code: RU0002809 - Manufacturer code: 2-083-01-5060 - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service, please contact us. Gjdpfx Ahjwtf Exjmobr

Condition: excellent (used), functionality: fully functional, MAZAK – 5-axis machining center VARIAXIS 730/5X II (dual pallet changer) Manufacturer: Machine Type: Year of manufacture: Date of commissioning: YAMAZAKI MAZAK Variaxis 730 with dual pallet changer 12/2007 02/12/2008 FEATURES: - Drive power 30/22 kW (30 minutes/continuous operation) - Spindle speed 35-10,000 rpm - Rapid traverse rates 42 m/min - 80 tools - SK50 !!!! - Control system: MAZATROL MATRIX - Tool length measuring device 2 Gjdpfxjzda Dvo Ahmebr ACCESSORIES: - MAYFRAN chip conveyor "CONSEP 2000", discharge on the right - High-pressure coolant for the spindle, 70 bar - CNC options package, performance signal light - Preparation for monitoring system B

Condition: used, mileage: 364,441 km, power: 95 kW (129.16 HP), first registration: 07/2015, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 02/2027, color: blue, gearing type: automatic, emission class: euro5, Year of construction: 2015, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Vehicle No.: 362-25 Mercedes-Benz 313 CDi BERTSCHE lightweight waste compactor / collection vehicle First registration: 07.2015 * Wheelbase: 3,250 mm * Rotating beacon * Electrically foldable signal panel * Full service history exclusively with DAIMLER Special equipment Hill start assist, additional reinforced battery, digital tachograph with download capability, 180 A alternator, programmable special module, amber warning beacon, acoustic reverse warning signal (external sounder), front mud flaps, seat upholstery: synthetic leather (driver’s cab), double passenger seat in cab, reinforced rear stabilizer, reinforced front stabilizer, heavy-duty shock absorbers, isolation relay for additional battery, 95 Ah fleece battery, reinforced front axle Further equipment: Adaptive brake light, driver’s airbag, washer fluid level indicator, electrically adjustable and heated exterior mirrors (both sides), exterior mirrors with integrated indicator, 74 Ah battery, brake assist, brake system with ABS+ASR, driver’s cab roof lining, lockable glove compartment, body type: standard flatbed, main fuel tank: 75 liters, headlamp leveling, truck registration, model update, engine: 2.1 l - 95 kW CDI CAT (2143 cc), wheelbase: 3,250 mm, smoker’s package, tire repair kit with compressor, low emissions according to Euro 5 standard, driver’s side seat belt system with warning system, passenger seat in cab adjustable, steel rims 6.5x16, service interval display Assyst, heat-insulating glazing, permissible gross weight 3.50 t Gedpfxexntprj Ahmobr Viewing possible at any time during our business hours, test drives by appointment! For export sales, a deposit will be retained, which will be refunded after receipt of the certificate of arrival. Company and advertising logos on the vehicles may have been digitally edited in the photos. No guarantee is given for the function of the extras. All information provided without guarantee – errors, changes, typographical mistakes and intermediate sale reserved. Vehicle descriptions do not constitute assured characteristics. Please refer to our General Terms and Conditions and ensure you are familiar with them.

Condition: new, Year of construction: 2025, - Saw blade 400 mm - Double mitre - 4 pneumatic clamps - Mist lubrication system Gjdpfsgg N Axex Ahmobr - 300 cm roller conveyor with length stop - Blow gun - Protective cover - Documentation - 400V

Condition: new, functionality: fully functional, power: 2.7 kW (3.67 HP), fuel type: gasoline, color: blue, operation weight: 62 kg, Year of construction: 2026, Equipment: UVV, Weber SRV 590-II Rammer – NEW | 700 blows/min | 62 kg operating weight | 280 mm shoe width | Honda GXR 120 petrol engine with 2.7 kW Item number: WEB170160 Technical Data: Manufacturer: Weber MT Model: SRV 590-II Condition: NEW Operating weight: 62 kg Blows per minute: 700 min⁻¹ Shoe width: 200 mm or 280 mm Engine: Honda GXR 120 petrol engine Gedpfxezh Dy Ie Ahmjbr Engine output: max. 2.7 kW Fuel: Petrol Starting system: Recoil start Features & Equipment: - Proven rammer for professional compaction applications - Reliable Honda GXR 120 engine – powerful & durable - 200 mm or 280 mm shoe width – ideal for trenches & confined job sites - High impact rate for efficient compaction - Compact & robust design – optimal for construction site use - Quality by Weber MT – immediately available Applications: ✓ Cable & pipeline construction ✓ Landscaping & gardening ✓ Compaction in trenches & narrow areas ✓ Municipal operations & construction companies ✓ Fiber optic & network installation Location: Warehouse D 46514 Schermbeck (NRW) – Inspection & collection possible Delivery across Germany & internationally on request Pricing ex works Maassenstraße 91, D 46514 Schermbeck (district of Wesel) All information subject to change. Errors and prior sale excepted. Prices plus VAT / VAT excluded Further models available! SRV 620, SRV 660, etc. also in stock ➡️ New & used machines, accessories & spare parts Buy Weber Rammer | SRV 590-II NEW | Petrol Rammer | Honda GXR 120 | 280 mm shoe width | Weber MT Compaction Technology Your reliable partner for compaction technology & construction equipment: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Contact us now & secure immediately available new equipment! On request, we are happy to offer you a virtual machine inspection via video call.

Condition: ready for operation (used), Okuma Opus 5000 II Main Board II A E4809-045-086-A, serial number as shown in the photo, used, shows normal signs of wear, 100% functional, scope of supply as per the photos. Gjdpfxoi Ecayj Ahmobr

Condition: ready for operation (used), Okuma Opus 5000 II Main Board II A, part number E4809-045-086-A / 1911-1509-44-90, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of supply as per photos. Gbedpfx Aei Eca Djhmer