Used Turntable Support Plate 3 Pieces for sale (75,576)

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33801013475, empty load weight: 7,180 kg, maximum load weight: 28,820 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: silver, available in multiple units Fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin, additional splash guard riveted to the underside as a sheet of metal, in the neck area above the rear axle of the semi-trailer and above the wheels on the vehicle, frame in reinforced design for vehicle loads up to the outer frame, outer frame with "Load-Lock profile" approximately every 400 mm for securing lashing straps, 10 pairs of lashing rings embedded in the top/outside of the outer frame, each rated at 10 tons, 24 tons. Two-stage support winch, single-side operation, with semi-circular lower part and straight connecting plate, with stroke compensation, folding rear support, support wedges with holder, aluminum side impact protection, steel under-ride protection, quarter panel fenders in front of and behind each axle, with additional sheet metal splash guard above the wheels, with anti-spray flaps according to EC regulations, 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable, container locking system, 4 pairs of locking recesses embedded in the floor for 2 x 20 ft or 1 x 40 ft containers, 4 pairs of container locking adapters, (additional transverse support required at the front and rear of the container, the container must rest evenly over its width in conjunction with the locks, transverse supports are not included in the scope of delivery), attachment rail for loading ramps at the rear extension over the entire width, rear extension mechanical, with hand crank, extendable by approximately 1,500 mm, lockable every 500 mm, including under-ride protection with lighting that can be extended, in the wheel well area with Lohr sheet metal, center with steel diamond plate, storage space for loading ramps integrated in the rear extension, usable only when the rear extension is extended by approximately 1000 mm, for transporting the ramps with the rear extension retracted - storage space for ramps in the FR, located to the right in front of the axles. 1 pair of ramps, 3,000 mm long, 300 mm wide, load-bearing capacity per pair 6,000 kg, electric cable winch, 24 volts, pulling force approximately 8165 kg, mounted centrally at the very front, operated with a wireless remote control, cable length 35 m x approximately 10 mm, with roller cable guide and removable guide rollers. Axles + Suspension: SAF/BPW drum brake axles, at the manufacturer's choice, air suspension, 1st axle automatic lift axle, additionally electrically operable from the truck, including forced lowering and starting aid. Braking System: 2-line pneumatic braking system, color-coded line routing for easy servicing, spring-loaded parking brake, 2 tamper-proof coupling heads at the front, EBS, electronic braking system with EBS socket at the front, without connection cable, with raising & lowering valve with quick vent, holding function in lowered position + auto-reset function, vehicle stability system, axle load recognition via EBS-CAN bus signal. Wheels and Tires: 235 / 75 R 17.5", manufacturer's choice, steel rims in twin arrangement. Cjdpeza Aiyofx Am Rjrc Electrical System: 24 volts, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED, 2 white position lights at the front in LED, 2 white/red side marker lights at the rear in LED, 2 x 7-pole and 1 x 15-pole tamper-proof sockets at the front, 2 additional LED work lights at the rear, 1 rotating beacon with holder, switched via parking lights, 2 pairs of warning signs, double LED illuminated and

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33801012811, empty load weight: 6,350 kg, maximum load weight: 28,650 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, color: silver, available in multiple units Chassis, semi-trailer, forwarding agent: fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin, frame in reinforced design for vehicle loading, outer frame with "Load-Lock profile" approximately every 400 mm for lashing straps, 10 pairs of lashing points recessed in the outer frame at the top/outside, each rated at 10 tons, foldable rear supports, 2 wheel chocks with holder, aluminum side underrun protection, steel underrun protection galvanized, quarter panel fenders in front of the 1st axle and behind each axle, with anti-splash flaps behind each axle, 1 spare wheel holder for 1 wheel, with wheel fastening kit, 2 plastic toolboxes, w=600 / h=425 / d=460 mm, lockable, container locking system, 4 pairs of locking devices recessed in the floor for 2 x 20 ft or 1 x 40 ft containers, the foremost position is a foldable locking device, 10 pairs of stake pockets recessed in the outer frame, internal dimension 70 x 40 mm, 10 stake pockets recessed in the middle of the floor, internal dimension 70 x 40 mm, 2 lashing/stake rails recessed transversely in the floor across the entire width up to the outer frame (max. usable internal width between the outer stake pockets approx. 2170 mm), approx. 100 mm high. With 20 mm round steel strips, top and bottom, distance from top to bottom approx. 60 mm (of the round steel). Bottom with angle plate as a closure, open halfway down. For lashing and inserting stakes 80 x 80 mm. Arrangement: Position 2 and 4 according to Fliegl data sheet, 20 stake pockets, hot-dip galvanized, storage space for aluminum ramps, ramps can be slid in from the rear, 3 pairs of foldable eyelets 10 tons in the outer frame (1 in front of the headboard and 2 in the rear area), Axles + suspension: SAF disc brake axles, air suspension, 1st axle automatic lift axle, including forced lowering and starting aid, operation "3x brake", axle lift below the recommended ride height, therefore no guarantee for tire damage Braking system: 2-line compressed air braking system, color-coded line routing for easy service, spring-loaded parking brake, 2 fail-safe coupling heads at the front, without connecting line, EBS, electronic braking system with EBS socket at the front, without connecting cable, with lifting and lowering valve, 2 ride heights, adjustable via hand control, 1 x for saddle height 980 mm, 1 x for saddle height 1100 mm, ride height in conjunction with lift axle, when the lift axle is raised, the loading or overall height increases by 50 mm, vehicle - driving stability system Wheels and tires: 435/50 R19.5, brand according to manufacturer's choice, steel rims Electrical system: 24 Volt, multi-chamber lights, yellow LED lighting on the side, 2 white position lights at the front in LED, 2 white/red side marker lights at the rear, 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, LED work lights on the side, 1 on the left and 1 on the right, 2 additional LED work lights at the rear, 1 rotating beacon with holder, switched via parking lights, 2 pairs of warning signs, LED illuminated and extendable to 4000 mm, additional 7-pin socket in the underrun protection at the rear Credjza Agropfx Am Roc Floor: Sieve plate, approximately 30 mm thick, on longitudinal girders for high point load capacity for forklift axle load up to a maximum of 7100 kg, Front wall / front corner posts: 25 mm aluminum hollow profile, 1350 mm high, corner posts steel in box profile, front wall additionally covered with 1250 mm h

Condition: used, axle configuration: 3 axles, first registration: 01/2005, loading space length: 13,600 mm, loading space width: 2,540 mm, total length: 13,950 mm, total width: 2,550 mm, total height: 2,550 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2005, Equipment: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Unladen weight: 6,840 kg, Gross weight: 39,000 kg, Type of chassis: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air suspension, ABS, EBS, Year of body construction: 2005, Axle type: BPW = Further Information = General Information Cab: Day cab Registration number: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual transmission Axle Configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tyre tread left: 2 mm; Tyre tread right: 3 mm Axle 2: Tyre tread left: 5 mm; Tyre tread right: 3 mm Axle 3: Steering; Tyre tread left: 2 mm; Tyre tread right: 8 mm Weights Empty weight: 6,840 kg Payload: 32,160 kg GVW: 39,000 kg Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Visual condition: average Damages: none = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality Crsdpfx Amey Atkuj Rsc • Good prices • Professional dealings • We speak many languages • We understand our customers • Assistance with import and transportation • (Export) registration plates arranged quickly • Expert technical services • The security of ‘recognizable quality’ • And more.... Visit our website for special offers and our full stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send us an inquiry via our website. Ask directly about our European warranty package.

Condition: used, available at short notice Csdox H Svwjpfx Am Rorc

Condition: new, Year of construction: 2025, Complete set double use laser machine ( 3 and 6 Kw in stock ) sheet metal 3015 ( 3 x 1,5 meter ) Tube 15 to 240 mm diameter tube length 6,3 meters include necessary options for a perfect laser line. include 1 filter installation ( cutting air can leave in factory ) include anty fire box. include Vacuum lift for sheet metalplate 800 kg load. no cable unit work on battery in vacuum unit. include 1 compressor for 16 BAR it give posibility to cut steel without gas. for quick cutting and SST steel it save lot of air and can increase the cutting feed consummable for long time cust free cutting time. include vacuume lifter from 800 Kg lifter work on battery in lifter box so with loading machine no cables around you special for save working arear. Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts Codpfx Ajnqzb Ijm Rorc are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: used, machine/vehicle number: WFDFLT33901007921, empty load weight: 9,000 kg, maximum load weight: 26,000 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2018, next inspection (TÜV): 02/2027, loading space length: 15,150 mm, loading space width: 2,480 mm, total length: 15,350 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", color: black, Attention, the images shown are archive photos! The vehicle may currently be in use! Weights and Dimensions: Permissible/technical gross weight: 35,000 / 39,000 kg Permissible/technical payload approx.: 26,000 / 30,000 kg Permissible/technical axle load: 24,000 / 27,000 kg Permissible/technical fifth wheel load: 11,000 / 12,000 kg Unladen weight approx.: 9,000 kg +/- build tolerance Overall length approx.: 13,850 + 1,500 mm Maximum overall width: 2,550 mm Overall height approx.: 3,200 mm Internal length approx.: 13,650 + 1,500 mm Neck length approx.: 4,050 mm Lower deck length approx.: 9,600 + 1,500 mm Internal width approx.: 2,480 mm Loading height, lower deck approx.: 900 mm Coupling height approx.: 1,150 mm Kingpin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis, semitrailer for forwarding operations Fine-grained steel welded construction, fifth wheel plate with replaceable 2" kingpin Lashing rings recessed in outer frame, rated at 2.5 t each 24 t two-speed landing gear, single-sided operation, with straight base, without compensator Chocks with holders Aluminium side underrun protection Steel rear underrun protection Quarter-shell mudguards in front of first axle and behind each axle With anti-spray mud flaps behind each axle Rear impact guard Plastic toolbox with drawer and shelf, w=650 / h=520 / d=670 mm Document box at the front bulkhead Telescoping Central beam frame with neatly welded, interlocking telescopic frame components. Extensible by max. 1,500 mm and can be secured after approx. 1,500 mm; outer frame add-on sections approx. 1,500 mm long, for hooking into outer frame in telescoped state. Locking via mechanical pin system. Axles and Suspension SAF drum-braked axles Air suspension Braking System Dual-line compressed air brake system Spring-loaded parking brake Two fail-safe coupling heads at the front, without connecting line EBS (Electronic Braking System) with EBS socket at front, without connecting cable Note: This trailer may only be towed by vehicles that can ensure effective ABS operation! With lift & lower valve Wheels and Tyres 235 / 75 R 17.5 Steel rims in twin arrangement, factory silver Cjdpfxsy Slp Ij Am Rsrc Electrics 24-volt, multi-chamber lights, yellow LED side marker lighting Two white position lights at front Two white/red lane position lights at rear 2 x 7-pin fail-safe sockets at the front, without connecting cables Rotating beacon with holder, operated via parking lights (beacon removable) Floor Approx. 30 mm thick phenolic ply boards, high point load capacity for forklift axle loads up to max. 7,100 kg Steel/chequer plate covering in wheel arch area where required Front bulkhead/corner posts 25 mm aluminium hollow section profile, 1,950 mm high, steel corner posts, full height for volume version Approval / Signs With Dekra inspection and certificate Prepared for single-line number plate holder Warning sign according to ECE - 70 Contour marking with reflective strips in accordance with ECE R 048, white on sides and red at rear Attention, the images shown are archive photos! The vehicle may currently be in use!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33903000364, empty load weight: 6,120 kg, maximum load weight: 28,880 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2022, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,800 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", color: silver, Please note: The images are archive photos! The vehicle may still be in use! Weights and Dimensions: Permissible/technical gross weight: 35,000 / 39,000 kg Permissible/technical payload approx.: 28,880 / 32,880 kg Permissible/technical aggregate load: 24,000 / 27,000 kg Permissible/technical fifth wheel load: 11,000 / 12,000 kg Unladen weight (basic version) approx.: 6,120 kg +/- manufacturing tolerance Overall length approx.: 13,800 mm Maximum overall width: 2,550 mm Overall height approx.: 2,388 mm Gooseneck length approx.: 4,050 mm Low bed length approx.: 9,600 mm Loaded loading height in the low bed approx.: 900 mm Internal width approx.: 2,480 mm Coupling height approx.: 950 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis Semi-Trailer Forwarder Fine-grained steel welded construction, fifth wheel plate with replaceable 2" king pin Telescoping front low bed extendable by approx. 1,500 mm, lockable every 500 mm Slightly inclined outer frame, new design with 'Load-Lock profile' for attaching lashing straps 'Patented Load-Lock-Cross' for lashing straps integrated in the cross member under the outer frame 24 t, 2-speed landing gear, single-sided operation, with straight lower part, without compensating support Free landing gear corner dimension and rear swing clearance approx. 1,920 mm Aluminum side underrun protection Steel rear underrun protection Quarter-shell mudguards 9 pairs of lashing/rack rails transverse in the floor, embedded up to the main frame, approx. 100 mm high. With 20 mm round steel rails, top and bottom, distance between upper and lower rails approx. 60 mm (of the round steel). Bottom has angle plate, half open downward. For lashing and inserting stakes 80 x 80 mm (3 pairs in the neck, 6 pairs in the low bed section). 3 pairs of stake pockets recessed in the outer frame, approx. 72 x 42 mm internal dimension Axles & Suspension Drum brake axles according to manufacturer specification 'Axle/chassis laser-aligned' – reduces tire wear and fuel consumption Air suspension Brake System 2-line compressed air braking system Color-coded lines for easy service Spring-loaded parking brake 2 error-proof coupling heads at front, without connecting line EBS, Electronic Braking System with EBS socket at front, without connection cable Note: The trailer may only be towed by tractors with functional ABS! With raise & lower valve Vehicle driving stability system Wheels and Tires 235/75 R17.5, manufacturer at discretion Steel rims, factory silver Electrical System 24V, multi-chamber lights, side-mounted yellow LED lighting (recessed) 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin error-proof sockets at front, without connecting cable 1 additional LED work light at rear, operated via reverse light Floor Anti-slip phenolic plywood panels, approx. 30 mm thick, high point load capacity, suitable for forklift axle loads up to max. 5,600 kg Front wall / Corner stakes front 25 mm aluminum hollow profile, 1,350 mm high Country of registration / license plates Germany Inspection and certification in Bosnia 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on sides, red at rear Warning sign according to ECE - 70 Paintwork Frame: Hot-dip galvanized including passivation '15-year warranty against rust-through' Front corner stakes: Hot-dip galvanized Front wall: Aluminum Cedpsy Slhqjfx Am Rjrc

Condition: used, axle configuration: 3 axles, first registration: 05/2003, loading space length: 13,600 mm, loading space width: 2,540 mm, total length: 13,900 mm, total width: 2,540 mm, total height: 2,600 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2003, Equipment: ABS, = Additional Options and Accessories = - EBS - Alloy wheels = Notes = Number of axles: 3, Unladen weight: 7,110 kg, Gross weight: 39,000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Alloy wheels, Suspension type: Full air, ABS, EBS, Body year: 2003, Axle type: BPW = Further Information = General Information Cab: Day cab Registration number: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual Axle configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tyre tread left: 6 mm; Tyre tread right: 3 mm Axle 2: Tyre tread left: 5 mm; Tyre tread right: 5 mm Axle 3: Steering; Tyre tread left: 8 mm; Tyre tread right: 6 mm Weights Unladen weight: 7,110 kg Payload: 31,890 kg GVW: 39,000 kg Environment Emission class: Euro 0 Condition General condition: Average Technical condition: Average Optical condition: Average Damages: None = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, with various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! Crjdeyu Hz Nspfx Am Roc • Large, rapidly changing stock • Recognizable quality • Good prices • Professional business conduct • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates are arranged quickly • Expert technical services • The security of 'recognizable quality' • And more.... Visit our website for special offers and our complete stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an enquiry through our website. Ask us directly about our European warranty package.

Condition: new, incl. aluminium floor / ramp compartment with ramps / many lashing points / manual hand winch Technical Data: • Brand: Martz • Model: GT PLATEAU 500 • Vehicle type: Car transporter • Vehicle condition: New vehicle • First registration: None • MOT/Inspection: 2 years from first registration • Internal dimensions (LxWxH): 507 x 211 x 0 cm • External dimensions (LxWxH): 657 x 215 x 97 cm • Perm. total weight: 3,500 kg • Unladen weight: 764 kg Cedpfxjx Tbite Am Rerc • Payload: 2,736 kg • Chassis: Platform trailer (wheels under the bed) • Tyres: 195/55R10C • Suspension: KNOTT rubber torsion axle • Jockey wheel: Yes • 100 km/h approval: Optional, retrofittable DESCRIPTION • Aluminium profile floor • incl. manual hand winch with brake • Loading ramp compartment underneath deck • 2x steel ramps for loading • Aluminium side walls can be retrofitted at any time • Insert sleeves at all 4 corners for tarp bows, mesh extension, side wall extensions, or raised front panel • Very robust welded steel frame • Frame fully hot-dip galvanised by immersion • Very low chassis for a minimal approach angle • Numerous continuous cross-members welded in for high point load capacity • 10x recessed lashing rings in side frame profile (600dAN/kg) certified • Automatic reverse mechanism • KNOTT overrun clutch and parking brake • Reinforced, very stable V-drawbar • 13-pin plug • Reverse lights • Large, heavy-duty safety lighting • Integrated rear fog light • Rear frame lighting recess-mounted • Rear LED side marker lights • Automatic jockey wheel Optional accessories – available on request: • 100 km/h approval with shock absorbers • Wheel chocks • Side panels • Anti-theft device • Spare wheel • Storage box • Reversing lights • Lashing straps • and more. Brand new vehicle with warranty and MOT. - Financing or leasing available - Nationwide delivery possible - All prices incl. VAT - Vehicle registration documents can be sent in advance or transport plates (Germany) can be provided. - Export plates incl. customs declaration available Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for immediate delivery! We have been specialists and a repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberté / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, mistakes, and prior sale excepted -

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2013, Equipment: ABS, * Air suspension * SAF axles Cedowtaz Ispfx Am Rerc * Stanchions * Twist-locks for containers * Unladen weight: 8,390 kg -----Internal vehicle number: 11009----Errors & prior sale excepted. WhatsApp support available! If you have questions about the vehicle or need further information, please feel free to contact us via WhatsApp. WhatsApp: German, English -- WhatsApp: German, English, Arabic.

Condition: new, functionality: fully functional, Laser source: MAX Photonics G5 Laser head: Boci BLT4 autofocus head Control system: FSCUT 9100 Csdpfxewtzu Ae Am Rsrc Software: Cypnest+Cypcut Table size: 8200 x 3200 mm Load capacity up to 9600 kg Straight cutting area: 8850 x 3700 mm Bevel cutting area: 8100 x 3050 mm

Condition: used, Tilting Rotary Table Shelf diameter: Ø 300 mm Manual tilt vertically + horizontally Maxi vertically tilt: 90° Base/shelf height horizontal position: 250 mm Height in vertical 90° position: 400 mm Crjdpfx Amexfa Ens Rjc Seating Surface: Length 450 mm x Depth 500 mm x Height 250 mm Weight: approx 200 kg

Condition: good (used), Year of construction: 2017, operating hours: 470,000 h, functionality: fully functional, machine/vehicle number: 1HA06A, overall weight: 2,200 kg, type of input current: three-phase, total width: 12,000 mm, total length: 40,000 mm, total height: 1,600 mm, power: 11 kW (14.96 HP), working width: 3,200 mm, number of ink cartridges: 6, used machine, working state Crjdpfxjttunyo Am Roc

Condition: used, first registration: 02/2017, color: other, Year of construction: 2017, Axle 1: left mm right mm Axle 2: left mm right mm Axle 3: left mm right mm Crjdpfx Ajza D Drom Rsc We have the possibility to stack trailers!

Condition: ready for operation (used), 40 mm x 40mm x20 mm cutting €3 each Cjdpjyhnqljfx Am Rerc

Condition: new, carrying capacity per cantilever arm: 650 kg, shelf height: 4,000 mm, total length: 4,000 mm, total width: 1,480 mm, load capacity per stand: 1,950 kg, Specifications: - H: approx. 400 cm - D: approx. 148 cm - L: approx. 400 cm - Cantilever arms: approx. 120 cm including 8 cm front deflector - Axis dimension: 130 cm - NEW, immediately available from stock. - 650 kg load capacity per arm - 1950 kg load capacity per upright - Uprights in RAL 7016. - Cantilever arms in RAL 3000 - Arms are hooked in. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) The uprights in this shelving set are prepared for possible conversion to double-sided use free of charge. For the advantages of a hooked cantilever arm, see illustrations. Shelf consists of: - 4 uprights, including base section approx. 400 cm, made of IPE180. - 12 cantilever arms, approx. 120 cm, made of 10 cm x 4 cm profile. - Includes all necessary fasteners and screws. Price: €1,995.00 net Crjdpezbtz Ajfx Am Roc €2,374.05 gross You will receive an invoice with VAT. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is available upon request through our partner shipping company; costs depend on the zip code. Installation: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know your needs... We are happy to assist you with the implementation of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2024, functionality: fully functional, load capacity: 1,000 kg, 1000 kg load capacity complete set including hand and double foot remote control 3-axis welding rotary table, height adjustable with through hole 200mm Plate diameter 900mm with T-slots alternatively with screwed on solid perforated plate 2000 x 1000 x 200mm, thickness 20mm, hole pattern 100mm, diameter 28mm Height horizontal min. 0.65m, max. 1.25m Height tilted min. 0.45m, max. 0.95m Speed from 0.01 - 1.1 rpm Inclination up to 135° Hand and double foot remote control with speed display very robust Cedsvllhropfx Am Rjrc Price is without accessories, accessories with very reasonable surcharge Table top surcharge €1900 (only in conjunction with positioner)

Condition: used, functionality: fully functional, load capacity: 2,000 kg, Equipment: foot remote control, 3-axis welding positioner, 2-ton load capacity, in good condition Incl. hand remote control (foot control available on request) Inclination and rotation speed continuously adjustable 0.05 - 1.0 rpm Clamping plate diameter: 1.0 meter Height tilted to center min. approx. 0.7 m, horizontal 0.9 m Codsyupgzjpfx Am Rerc Height tilted to center max. 1.6 m, horizontal 1.8 m Length 2.2 m, width 1.35 m

Condition: new, Year of construction: 2025, load capacity: 3,000 kg, Equipment: foot remote control, rotational speed infinitely variable, 3000 kg load capacity welding positioner, complete set Codew T S Huepfx Am Rsrc Horizontal load capacity: 3000 kg, tilted load capacity: 3000 kg 2 gears for tilt adjustment Motor protected by two steel swing doors Very robust design Speed steplessly adjustable from 0.05 to 0.7 rpm (optionally up to 1.5 rpm) Turntable diameter: 1400 mm Tilt up to 120° Height horizontal: 1300 mm, tilted to center: 1050 mm Dimensions: Length 2.0 m x Width 1.4 m Handheld remote control with digital display and dual foot pedal

Condition: ready for operation (used), Year of construction: 2005, Pallet changer TOOLPAL 3 R Crsdsr Hngljpfx Am Rec 12 compartment

Condition: good (used), Year of construction: 2001, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, CNC milling machine KUNZMANN - WF7/3 X-Axis: 600mm Y-Axis: 400mm Z-Axis: 400mm Table Length:650mm Table Width: 400mm Table load: 250 Cjdpfx Aswq Ndgem Rjrc Stroke pinole:40mm Length: 2800mm Width: 2400mm Height: 2100mm Weight: 2000kg

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7,200 kg, maximum load weight: 27,800 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/65 R22,5", Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis, Saddle, and Transport Company Fine-grained steel welded construction in lightweight design, saddle plate with 2 interchangeable kingpins, main frame reinforcement for 25 tons in the center of gravity at a loading length of 3 m in the retracted state. 13 pairs of hooks for tie-down strap attachment welded onto the cross members. 23 pairs of lashing eyes recessed in the outer frame, each rated at 3.5 tons. Outer frame with Load-Lock profile for tie-down strap attachment. Note: Not usable with sideboards! 24 tons, 2-speed support leg in reinforced design for loaded docking, single-sided operation. Chocks with holder. Aluminum side impact protection. Underrun protection. Semi-fender mudguards. with anti-spray flaps according to EC standards. 1 spare wheel holder for 1 wheel, with wheel fastening kit. 1 closed stake pocket box, open at the top, below the loading platform, doors on both sides, w=450 mm/H=400/420 mm/d=2460 mm. 6 pairs of extendable stake pockets for square tube stanchions 80x80 mm, extendable from loading width of 2000 mm to 3100 mm. 4 pairs of stake pockets recessed in the outer frame, for square tube stanchions 80x80 mm. 11 stake pockets recessed in the middle of the floor, for square tube stanchions 80x80 mm, with reinforcing beam, installed between the outer stake pockets. Credpfxei Ri Szj Am Rjc 5 x 3 pairs of stake pockets recessed on the outside of the longitudinal beams, for square tube stanchions 80x80 mm, including reinforcing beams – for load securing to the front and rear for the transport of construction steel mesh 2x5000 mm or 2x 6000 mm. 6 lightweight plug-in stanchions, B=80/ D=80/, usable height approx. 1850 mm, hot-dip galvanized, with rope guide at the top for strap tensioning. 12 lightweight plug-in stanchions, B=80/ D=80/, usable height approx. 1850 mm, hot-dip galvanized, with lashing eyes welded on at the bottom on both sides. Note: Stake pockets/plug-in stanchions are not designed for the sole securing of long materials, pipes, etc. without wrapping. 2 plastic toolboxes, with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock. (Lock not included) 6 construction steel winches with wire rope and swivel hook, with rope passage through the outer frame, 1 removable attachment gearbox for construction steel winch – supplied separately. Telescoping Main frame telescopic extendable by max. 4,000 mm and lockable approximately every 500 mm. Locking with pneumatic pin locking + display of frame locking on both sides, operated via a hand knob, control for brake/locking and suspension on the left front above the axles. Storage compartment between the longitudinal beams in the extended state. Axles + Suspension SAF disc brake axles with 430 mm disc diameter. Last axle with trailing arm steering, with automatic reversing lock via reversing light, and additional locking function on the vehicle via a hand knob, as well as manually via a switch in the towing vehicle (Pin 10), without truck installation. Axle spacing offset mm Air suspension 1st axle automatic lift axle, additionally electrically operated from the truck, with start-up aid. Braking system 2-line compressed air braking system. Color-coded line routing for easy servicing. Spring-loaded parking brake. 2 fail-safe coupling heads at the front. EBS manufa

Condition: used, functionality: fully functional, machine/vehicle number: 2550X10.14MM, control type: manual, degree of automation: manual, actuation type: mechanical, number of rollers: 3, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller diameter: 400 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 800 mm, sheet thickness (max.): 14 mm, sheet thickness stainless steel (max.): 10 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: centralized greasing system, cone bending device, emergency stop, swiveling upper roller, 3 roll 2500x14 mm Plate bending machine Model OMCCA ITALY CAPACITY plate width 2500 mm plate thickness 14 mm pre-bending 10 mm Credpfsy Aubuox Am Roc --- Useful rollers width 2550 mm Top roll d 300 mm Side rollers D 280 mm hard surface of the 3 rolls centralized gear unit side rolls driven Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on molds for section bending Variable speed rolling up to 5 mtr/min power electric motor 20Hp on hydraulic unit console with electric push buttons commands. Dial gauge position rollers readout safety installations with emergency stop

Condition: excellent (used), CATALOG NUMBER 7614 Technical data: - Inlet width: 550 mm - Inlet height: 220 mm - Shaft width: 630 mm - Knife length: 630 mm - Number of knives: 2 pcs - Sieve dimensions: 60x60 mm Csdpfsza Eipsx Am Rorc - 2 lower toothed feed shafts - Lower shaft motor approx. 1.5 kW - Upper toothed feed shaft - Upper shaft motor approx. 1.5 kW - Vibrating chute - Vibrating chute length: 4750 mm - Vibrating chute width: 450 mm - Main motor: 45 kW - Vibrating chute motor: 1.5 kW - Auto-reverse - Reverse mode - Overall machine dimensions L/W/H: 3200x1700x1400 mm - Overall machine dimensions L/W/H: 4750x800x1100 mm - Weight approx.: 4500 kg ADVANTAGES – Auto-reverse (adjustable) – Reverse mode – Used chipper, in very good condition Net price: 120,900 PLN Net price: 28,780 EUR (depending on the 4.2 EUR exchange rate) (Prices subject to change with significant exchange rate fluctuations)

Condition: like new (used), Year of construction: 2013, For sale is a functioning and very well-maintained gas burner from the Weishaupt brand, including gas piping (Dungs DN 80). 1. Burner type: WM-G30 Output: 600-5700 kW Design: ZM Year of manufacture: 2013 Connection pressure: 15-500 mbar Credpfx Aszamd Uom Rjc