Used Turning And Welding Machine for sale (71,296)

Condition: used, Inverter welding machine for manual electric welding IMS - GYS type PROGYS FLEX 280A CEL MMA welding machine, inverter welding machine, manual electric welding inverter Serial no. IEC 60974 Year of manufacture 2020 Power with mains operation 400 Volt (40% ED) 280 Amp. Power with mains operation 400 Volt (60% ED) 200 Amp. Power for mains operation 400 Volt (100% ED) 170 Amp. Power for mains operation 230 Volt (40% ED) 200 Amp. Power for mains operation 230 Volt (60% ED) 180 Amp. Power for mains operation 230 Volt (100% ED) 150 Amp. Adjustment range 5-280 Amp. stepless Mains connection 230 / 400 Volt, 50 Hz. - Operating voltage from 110 to 480 volts alternating current - Adapts fully automatically to the existing mains supply - equipped with 16 Amp. CEE plug for 400 Volt mains voltage - Hot-start function (optimizes the ignition behaviour, simplifies the welding start of electrodes that are difficult to ignite) - Anti-stick function (optimizes electrode guidance and prevents the electrode from sticking) - Arc-Force function (optimizes arc stability and improves penetration) - Digital display - Plug socket for remote control connection - Earth cable with plug connection - Electrode tongs with 3 meter cable and plug connection - Stick electrode welding, can be used for all electrode types up to Ø 5 mm - TIG-DC welding (without TIG hosepack) - The device may be connected to a flexible three-phase power supply between 110 V and 480 V or to a fixed three-phase 400 V power supply (50 - 60 Hz) plus ground wire. This appliance may only be connected to a 3-phase power supply system with 4 conductors, where the neutral conductor is earthed. Dimensions (appliance without cable) L x W x H 470 x 270 x 430 mm Weight (without cable) 23 kg New, unused Ncsdpfovg Rh Tex Aaajr

Condition: used, Spot and projection welding machine NIMAK type BMP 20/150 Spot welding machine, projection welding machine Mach. No. 81692 year of manufacture approx. 1980 Power at 50% duty cycle 150 kVA Clamping plate below 200 x 160 mm Clamping plate above 200 x 160 mm Power setting continuously variable Max. projection 150 mm Electrode force 200 - 2000 kp continuously variable Operating air pressure max. 6 bar Connection power 600 kVA Mains connection 380 volts, 50 Hz - Welding control DTW 4Z 2P - Single spots and series spots Nedpfx Aajv Dxm Ssaocr - Parallel electrode guidance - Water-cooled without cooling unit - Electric 2-hand control panel with emergency stop - Control cabinet with control permanently attached to the machine Space requirement L x W x H 1000 x 800 x 1800 mm Weight 900 kg good condition

Condition: used, Straightening and welding plate made of steel, solid material Machined steel plate from a tool frame Length 2980 mm Width 1380 mm Thickness 74 mm - solid steel plate - milled surface - 4 bolted lifting lugs - plate equipped with some symmetrical holes Net weight approx. 2380 kg Nedpohwn Tisfx Aaaocr

Condition: used, Spot projection welding machine NIMAK type PMP 5 / 35 Spot welding machine, projection welding machine Make No. 88100 Year of construction approx. 1988 power at 50% ED 35 kVA throat 250 - 450 mm working stroke 40 mm electrode force 100 - 460 kp infinitely variable Electrode force at 6 bar 460 daN Operating air pressure 2 to 6 bar Electrode arm Ø 60 mm Electrode holder Ø 30 mm Insert electrodes cone MK 2 Ø 17.78 mm Arm distance 200 / 400 mm Adjustability of electrode holder 200 mm Connected load 83 KVA Mains connection 380 Volt, 50 Hz - 4-time control Nedpfehubgzex Aaaocr - stepless power adjustment - single points and series points - bouncing electrode guide - water cooled (without cooling unit) - electrical foot switch space requirement L x W x H 1200 x 650 x 1500 mm weight 300 kg good condition

Condition: used, AC Spot Welding Machine, Projection Welding Machine ARO Type MA 350 DC AC Resistance Welding Machine Mach. No. MA35031332 / 9731122B110 Year of Manufacture 1997 Power at 50% duty cycle: 30 kVA Power at 100% duty cycle: 21 kVA Maximum welding power: 156 kVA Thrust 550 mm Electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Cylinder stroke max. 80 mm Njdpfx Aohpf Iyeaaocr Electrode force max. 730 daN (at 6 bar), continuously adjustable Operating air pressure 0.5 to 6 bar Mains connection 400 volts, 50 Hz Connected load 75 kVA / 63 amps / Cable cross-section 3x 16 mm² Maximum possible sheet pairing: 5 mm + 5 mm - ARO Micro welding control system 2X16 III Version 6Z2P Type 1B (6 times - 2 programs) - Continuous welding current adjustment via thyristor module - Parallel electrode guide - Double-stroke welding cylinder (pre-stroke / welding stroke) - Single-stroke and continuous spot welding modes - Electrode force continuously adjustable via air pressure - Water-cooled by external water cooling (water cooling unit not included) - Electric foot switch - Control cabinet with control system permanently mounted on the machine - PC interface RS 485 - Spot weld counter - Operating instructions for control system, spot welder, and electrical diagram included Space requirement: W x H x D 520 x 1550 x 1150 mm Weight: 290 kg Very good condition

Condition: used, Cooling unit Water recooling unit DALEX type DRF 2 Machine no. No. 38913719 Year of construction 1989 Volume flow 0.35 m3/h Cooling capacity 1950 Watt Operating pressure 2 to 3 bar Refrigerant R 134a Unit was converted from R12 to R134a Operating overpressure 18 bar Pipe connection thread 3/4" Tank volume 600 x 400 x 350 mm = approx. 80 liters Nedpfx Aajg D H Ruoajcr Mains connection 380 Volt, 50 Hz Space requirement L x W x H 900 x 800 x 1020 mm Weight 100 kg Good condition

Condition: used, MF welding machine with water-cooled spotter Medium frequency spotter Manufacturer: TECNA (Italy) Type 3670 E CF00 Serial no.: Year of construction 2014 Rated welding power 25 kVA Max. welding power 160 kVA Power supply 400 Volt, 50 Hz - Welding controller TE750 or TE760 - Spotter for single-sided spot welds - Ideal for bodywork repair with excellent weld quality - Water-cooled type 2BHPLN - Mobile transport trolley Weight approx. 155 kg Very good condition - as new Njdog U A Uzopfx Aaaocr

Condition: used, Capacitor discharge welding machine MEGATRONIC type CD-1200 / QB 2 / 6P Capacitor discharge welding with high currents and minimum welding times. Spot projection welding machine The CD (Capacitator-Discharge) welding technology works on the principle of transformed capacitor discharge. Year of manufacture 1993 Very high welding power with relatively small power supply. - very short welding times, welding process with current rise and high welding current in milliseconds - no distortion or annealing - no significant heating of the edge areas, ideal for heat sensitive components - welding of steels with high carbon content - welding of surface coated workpieces rated power 12288 Ws Uc 3200 Volt Capacity 2400 µF Open circuit voltage 10 volts Electrode force 200-2000 daN infinitely variable Operating air pressure 6 bar Mains fuse min. 35 Amp. Njdpfjguvtdsx Aaaecr Operating current 32 Amp. Mains connection 400 Volt, 50 Hz - Programmable control megapuls CD-12000 - pralleler electrode guide - Electrical 2-hand control panel adjacent - Switch cabinet with control fixed to the machine weight 3000 kg good condition

Condition: used, Capacitor discharge welding machine MEGATRONIC type CD-1200 / QB 2 / 6P Capacitor discharge welding with high currents and minimum welding times. Spot projection welding machine The CD (Capacitator-Discharge) welding technology works on the principle of transformed capacitor discharge. Masch. No. 352 / 92 Year of construction 1993 Very high welding power with relatively small power supply. - very short welding times, welding process with current rise and high welding current in milliseconds - no distortion or annealing - no significant heating of the edge areas, ideal for heat sensitive components - welding of steels with high carbon content - welding of surface coated workpieces rated power 12288 Ws Njdpfx Aajguvtajaocr Uc 3200 Volt Capacity 2400 µF Open circuit voltage 10 volts Electrode force 200-2000 daN infinitely variable Operating air pressure 6 bar Mains fuse min. 35 Amp. Operating current 32 Amp. Mains connection 400 Volt, 50 Hz - Programmable control megapuls CD-12000 - pralleler electrode guide - Electrical 2-hand control panel adjacent - Switch cabinet with control fixed to the machine weight 3000 kg good condition

Condition: used, TIG welding equipment, TIG welding machine NIMAK type GS 200 W Nedpfx Aaedzqbvjascr TIG and electrode DC welding unit, E-welding machine also suitable for stick electrodes Serial No. 26642 Year of manufacture approx. 1983 Output 200 Amp. = 60% duty cycle 150 Amp. = 100% duty cycle Stepless adjustment range of performance Power supply 380 Volt, 50 Hz, 32 Amp. plug - 5 meter TIG torch package - HF ignition - Stepless current adjustment and current up-slope - Connection for electrode welding - DC only - Water-cooled - Shielding gas pressure regulator Space requirement L x W x H 900 x 590 x 1000 mm Weight approx. 200 kg Good condition

Condition: used, Plasma cutting unit MB - Welding Technology Type Plasmaprof 50 Equivalent to CEBORA Machine no. 244311 Year of manufacture: approx. 1992 Power: 50 A = 35% duty cycle 30 A = 100% duty cycle Adjustment range: 2 steps Torch hose length: approx. 6 meters Compressed air connection: 4.7 bar Power supply: 400 Volt, 50 Hz, 32 Amp plug Installation dimensions (L x W x H): 500 x 350 x 700 mm Weight: approx. 80 kg Ncjdpfx Aaodzqa Hjaer Good condition

Condition: used, WIG welding machine, electric welder DALEX type TGKW 55 (AC-DC) Serial No. 532521 Year of manufacture approx. 1975 Output 225 amps = 60 % duty cycle 125 amps = 100 % duty cycle Adjustment range 2.8 to 225 amps Current type: DC and AC (AC-DC) Nsdpfxodzqaco Aaascr Mains connection 380 Volt, 50 Hz - Power adjustment in 5 coarse stages and stepless fine adjustment via potentiometer - 2-stroke and 4-stroke welding function - Remote control with potentiometer for fine adjustment - Digital ampere display - 4-meter WIG torch package - Welding gas pressure-reducing valve - Water-cooled Dimensions (L x W x H): 1050 x 610 x 890 mm Weight: 290 kg Good condition

Condition: used, E-welding machine, stick electrode welding machine ESAB Type LTG 250 Machine no.: 736-820-387 Year of manufacture: 1997 Nsdpfx Aajd N E Rveascr Output: 250 A = 35% duty cycle 190 A = 60% duty cycle 150 A = 100% duty cycle Power setting: stepless - Electrode holder with 6 m connection cable - Direct current (DC) - Fan-cooled - TIG welding may also be possible, but without torch package Power supply: 380 V, 50 Hz, 32 A plug Dimensions (L x W x H): 1200 x 750 x 1050 mm Weight: 180 kg Good condition The unit was originally designed for TIG welding as well. The torch package for TIG welding is not included and its function has not been tested. The water cooling was intended for the TIG torch package. Therefore, the unit is being sold only as an electrode welding machine. Test welds with stick electrodes show excellent welding results.

Condition: used, Welding edge shaper, edge shaper, edge chamfering machine TRUMPF Chamfering of steel plates for weld seam preparation Type TKF 103 Ncodpfsdz Sq Ejx Aaaor Sheet thickness: 4 - 25 mm Bevel length max: 10 mm Bevel angle: 30° Power: 2000 watts Mains connection: 220 Volt, 50 Hz - equipped with guide bracket for 30° bevel angle - resharpenable steel for high tool utilization - Set up for 20 mm sheet metal For chamfering straight and curved edges with a radius of at least 40 mm. For chamfering edges on flat and curved workpieces as well as pipes with an internal diameter of at least 80 mm. Weight: 14 kg

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 920601, throat depth: 300 mm, overall weight: 500 kg, total width: 800 mm, total height: 1,500 mm, total length: 1,200 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Ncsdpjynkmcsfx Aaajr Reach: approx. 300 mm MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Rated primary voltage: 380 V Open-circuit voltage: 2.3 to 4.1 V Operating current: 2.6 kA Connected load: 43 kVA Dimensions & Weight Dimensions (L x W x H): 1,200 x 800 x 1,500 mm Weight: 500 kg External reference: Lot 30 / Training workshop

Year of construction: 2001, condition: ready for operation (used), General Data Measurements width 4000 mm + 2000 mm bar loader Measurements depth 2300 mm Measurements height 2100 mm Machine weight 10400 kg Control Unit Brand FANUC Model 18i Main Drive Number of spindles 2 Spindle speed range 40 - 4000 Spindle motor power 15 kW Number of axis 7 Movement X-Axis Movement 180 mm Z-Axis Movement 930 mm Turret Number of turrets 2 Ncedpfxjx D N I Ao Aaaor Number of tool slots 15 Additional Equipment Bar loader multifeed, maximum bar length 1.5 meters. This Muratec MT 25 MC Lathe was manufactured in the year 2001 in Japan. It is equipped with a Fanuc 18i CNC control unit and has 7 axis. The machine has a spindle speed of 40-4000 rpm. Application Types Turning

Condition: used, CNC Lathe DMG MORI SEIKI - GILDEMEISTER Type CTX 310 ecoline Machine No. 8044001846E Year of manufacture: 2013 CNC Control: SIEMENS Sinumerik 840D sl Ncsdsyk Hrgepfx Aaajr Swing diameter over bedway cover: 330 mm Swing diameter over cross-slide cover: 260 mm Centre height max.: 190 mm Centre distance max.: 580 mm Turning diameter max.: 200 mm Longitudinal slide travel (Z-axis) max.: 450 mm Cross-slide travel (X-axis) max.: 160 mm Spindle bore through draw tube: 51 mm Spindle bore through front bearing: 100 mm Spindle speed max.: 5,000 rpm Feed rate X and Z: mm/min. Rapid traverse X-axis: 30 m/min. Rapid traverse Z-axis: 30 m/min. Feed force X and Z: 4,500 Nm Tool turret: 12 stations Driven tool stations: 6 stations Tool holder cylindrical VDI 30 mm Spindle drive motor power at 100% duty cycle: max. 11 kW Spindle drive motor power at 40% duty cycle: max. 16.5 kW Power supply: 400 Volt, 50 Hz, 21 kVA - CNC control SIEMENS Sinumerik 840D sl, system software NCU V04.04+SP02+HF02 - Controlled C4-axis chuck position and C1-axis for tool turret - 3-jaw chuck AUTOGRIP Ø 210 mm with 1 set of hard jaws and 15 sets of soft jaws - AUTOGRIP hydraulic hollow clamping device - Clamping force adjustment for regulating clamping pressure - Tool turret SAUTER, type 0.5.901.020 with 12 stations (6 driven) - 20 tool holders VDI 30 - Tailstock MK 4 - Indirect measurement system via rotary encoder - Chip conveyor with integrated coolant system - Workpiece residual life display and piece counter as large display on machine enclosure - Control cabinet cooling unit - 9,716 total operating hours (main switch on), of which 3,322 spindle hours as per counter - Operating instructions and manuals Machine footprint with chip conveyor (L x W x H): 4,500 x 2,600 x 2,050 mm Base machine space requirement (L x W x H): 2,900 x 2,150 x 2,050 mm (3,200 kg) Chip conveyor space requirement (L x W x H): 3,350 x 850 x 1,650 mm (500 kg) Weight: approx. 4 tons Very good condition

Condition: used, functionality: fully functional, Spot Welding Machine Fab. Dalex Type SF 8 Technical Data Manufacturer: Dalex Type: SF 8 Rated power at 50% duty cycle: 8 kVA Rated primary voltage: 380 V / 50 Hz Max. welding power: 23.7 kVA Max. short-circuit current: 8.8 kA Cooling water flow rate: 4 l/min Electrode force: 17 to 390 daN Open circuit voltage: 2 to 3.2 V Stages: 4 Throat depth: 235 mm Dimensions: L 750 x W 350 x H 1100 mm Weight: 77.5 kg Njdpfx Aajx Ic T Aeascr All information without guarantee. A demonstration can be arranged at any time in our exhibition hall.

Condition: used, Welding transformer, high-current transformer, transformer for spot welding machines, projection welding machines, seam welding machines ELREX type 3x ET70.0.G Serial no. Year of manufacture approx. 1990 Comprising three water-cooled transformers with water-cooled rectifier block Technical data: Total rating at 50% duty cycle: 210 kVA (total output from 3 transformers) Secondary voltage: 7 – 10.5 volts (adjustable in 4 steps via terminal connectors on the transformer) Secondary current at 50% duty cycle: 20.1 kA (total from 3 transformers) Primary connection: 380 volts, 50 Hz (three-phase) Details per each transformer: Rating at 50% duty cycle: 70 kVA (per transformer) Secondary voltage: 7 – 10.5 volts (adjustable in 4 steps via terminal connectors on the transformer) Secondary current at 50% duty cycle: 6.7 kA (per transformer) Primary connection: 380 volts, 50 Hz (two-phase) Cooling water requirement per transformer: 4 liters/min. Insulation class: F - Water-cooled transformer - Water-cooled rectifier block mounted on secondary side - DC power output via contact surfaces 50x50mm with M20x1.5mm threaded holes - Temperature sensor on each rectifier element and on each transformer winding - Connection cable: 7-core, cross section 50 mm², length approx. 6 m Overall dimensions (WxHxD): 700 x 710 x 440 mm Nodpfx Aaedzp Txoaocr Total weight: 480 kg Good condition

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, WE Flexmaster 400 laser welding machine Year of manufacture: 2010 Laser unit TruDisk 3302, Trumpf company Cooling unit P805-17640, Termotek company Material: black sheet metal and stainless steel sheet Ncedpfxev Ipcfj Aaaor Sheet thickness: 0.6 - 2.0 mm Pipe diameter: 80 - 600 mm Pipe length: 100 - 1250 mm

Year of construction: 2004, condition: used, Hollinger 4-point welding machine type ASP-L Ncjdoylingspfx Aaajr

Condition: good (used), functionality: fully functional, Year of construction: 2005, It is important to know that a total of two welding machines and two CNC corner cleaning machines are available, comprising two complete production lines. The machines are operational and still in daily use. CE Conformity: Yes (CE marking on the machine) Power supply: 400 V Frequency: 50 Hz Current connection: 25 A Main switch: Industrial main switch with safety interlock Operating air pressure: 7 bar Main components - 4 welding heads - Linear motion system - Profile clamping units - Welding plate system - Pneumatic press units - Electronic temperature control - Central control unit - Safety light curtain Operation Profile clamping – Insertion of the heated welding plate – PVC melting – Application of welding pressure – Welding cooling – Removal frame The system operates semi-automatically/automatically. Nsdpsyyavrjfx Aaajcr ``` Includes: - Automatic head positioning - Pneumatic clamping system - Digital temperature control - PLC control - Operator panel and industrial PC Control system Industrial PC control Safety system - Light curtain - Emergency stop button - Safety covers - CE conformity Powered up in Hungary, the system can be dismantled and delivered in approximately June.

Condition: used, Year of construction: 1982, Multi-spindle lathe Ncjdsyll Atepfx Aaaor Brand: TORNOMAT Model 2 C

Condition: ready for operation (used), Resistance Welding Machine, Resistance Welder, Meritus RAS 150 VSH, Used Machine Manufacturer: Meritus Type: RAS150VSH, MPW-RW 811-1410 Overall dimensions: 900 x 1370 x 2450 mm Electrical data: Nsdperdf Acjfx Aaajcr 415 V; 150 kVA; 50 Hz Equipped with light gate Tool water cooling

Condition: used, Year of construction: 2005, Technical details: swing diameter: 320 mm control: 840 D SIEMENS turning speeds: 5000 1/min spindle drive: 20 / 27 kW chucking diameter: 250 mm travel -x axis: 650 mm travel -z axis: 300 mm turret head: 12 Pos. tool holder: VDI 40 toolpiece turning speed range: 4000 1/min work piece power: max. 11,7 kW weight of the machine ca.: 8 t CNC vertical lathe, live tools, C-axis, high pressure pump 20 bar, 500l, filter, flush gun, 3-jaw chuc, EWAB loading station right, chipconveyor, Nodpfx Aasmcibwoaecr approx. 23.500h "machine on", approx. 8.000h "spindle on" (in total) MACHINE WILL GET NEW (OVERHAULED) SPINDLE (0 hours) *