Used Sumitomo (Shi) Demag El-Exis S 250/630-1450 for sale (78,366)

Condition: new, functionality: fully functional, empty load weight: 374 kg, maximum load weight: 926 kg, overall weight: 1,300 kg, loading space length: 2,530 mm, loading space width: 1,520 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, MARTZ Tipper 250 C S 1.3T NEW VEHICLE Internal dimensions: 253cm x 152cm Side board height: 30cm Loading area height: 80cm Total weight: 1300kg Payload: 926kg Braked tandem axle trailer Overrun brake and parking brake by KNOTT Axle with 1350kg brake Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side boards with tensioning latch Can be folded down and removed on all sides Galvanized steel floor Support wheel 6 tie-down points Reinforced 13" C tires with steel valve M+S tires Net/rope hook on the frame 13-pin connector Outline lights at the front Rear lamps with reversing light and triangular reflectors Upper frame mounted on rubber Hand pump with stowable handle Lock for upper frame OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE STARTING FEBRUARY 2026 - Equipment for 100km/h (shock absorbers) - Spare wheel with holder - Loading ramps - Folding crank for rear supports - Complete LED lighting - Anti-theft device - Fine or coarse mesh net - H-frame - Leaf guard in various heights, also closed - Extension side boards, steel or aluminum, 30cm with tensioning latch - Flat cover with or without bows - High cover 140cm Further accessories available on request! Plus freight to Gera and vehicle registration document 200 € net. Images are for illustrative purposes and may show optional accessories at an extra cost. Kodezlyptopfx Adqjdr Have you not yet found the right trailer? We have 50-100 vehicles in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 am to 5:00 pm for all types of repairs. Specialist in axle repairs, also for caravan trailers. In addition, we have a large assortment of spare parts and accessories for trailers from various manufacturers. Visit us online or come by!

Condition: good (used), Manufacturer: MBT Type: MV-250 S Motor: 5.5 kW Hopper size: 780 x 600 mm Kedpfohzr U Ijx Adqjdr Housing size: 3500 x 1000 x 2200 mm

Condition: good (used), drilling depth: 1,500 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 1,500 mm, Manufacturer: TBT deep drilling technology Type: BW 250-S Control: SIEMENS 840D Year of manufacture: 2007 Drilling, Milling, Tapping for heat exchanger bases and plates Swivable A Axis + 25 to - 15 Degrees Kdodpfxev A Uw Dj Adqer Filtration and Coolant system 1000 L Cip conveyor 2000 x 1200 height out put Milling tool changer Tower Station 20 positions Capacity ELB Drilling 3 - 35 mm Capacity Milling 250 ccm/Min Feed rates all axis 15,000 mm/Min X-Y-W-Z Cutting hours approx. 15,000 Large tooling package Specifications Metric US Standard Max. Drill Ø steel 40 mm Drilling depth 1500 mm X - axis 2000 mm Y - Axis 1300 mm Z-axis 1500 mm W-axis 750 mm Table load 15000 Table dimensions / L x W or ø 1600 x 1200 mm Spindle mount HSK 63 Mk Spindle power 11 kW Speed 8000 Rpm Dimensions (estimate) Length 7200 mm Width 7800 mm Height 4250 mm Weight 23000 kg Please note: The information on this page is believed to be accurate and is provided by us and, where possible, from the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation or contractual terms. We recommend that you check all important details.

Condition: good (used), Code: 0299 Brand: SCM Model: S 630/E - CE Standard Kdsdpfxoyi E T Tj Adqsr Automatic thickness planer for carpentry workshops, custom furniture, wooden window frames, wooden carpentry, sawmills, plastics, composite materials, and various - CE Standard Technical data: Electronic table positioning Pneumatic roller pressure adjustment Drive system with 3 large-diameter motorized upper rollers - Easily interchangeable Electronic feed speed variator 4/20 mt/min Work table dimensions 630 x 1000 mm Max working width 630 mm Min/max working height 3/300 mm Min working length 260 mm N° 4 knives Motor Hp 7,5 Feed motor Hp 2 Suction mouth diameter 150 mm Overall dimensions mm 1360 x 1080 x 1220 h Weight kg 1000

Condition: new, empty load weight: 614 kg, maximum load weight: 1,386 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 2,530 mm, loading space width: 1,550 mm, total length: 1,630 mm, total width: 990 mm, total height: 3,930 mm, suspension: steel, tire size: 165R13C 96/94N, This tipper has a frame construction with a closed profile, which increases its stability. It uses a 5-stage cylinder which enables a larger tipping angle (up to 55°). All side walls can be opened and removed. The model also has a steel floor. | KIPPER 250/2 C S 2T Reversible tipper | Galvanized frame | Lockable storage shaft for 2 access ramps incl. ramps Ramps (L:243cm, W: 30cm) | Loading area dimensions: L: 2.53m W: 1.52m Dropside height: 0.40m Loading height 0.70m | 4 lashing rings (2 left, 2 right) recessed in the floor | Knott axle with drum brake | Leaf suspension | Operating voltage 12V | Spindle parking brake | Errors excepted. Kjdpfx Adeu R D Sdsqodr

Condition: ready for operation (used), Year of construction: 1999, SCM S630 Thickness Planer Max. planing width: 630 mm, Max. planing height: 300 mm, 4 cutterblocks electric height adjustment, infinitely variable feed speed, Kdedszlwxfepfx Adqjr electronic height display with digital readout 2 rubber feed rollers 5.5 kW motor with brake CE compliant Price: 5500.-

Condition: repair required (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: X27054, clamping force: 2,000 kN, screw diameter: 62 mm, Used Stork IMM 2000-1450 injection molding machine. Kdsdpfowhlddjx Adqsr The machine still needs to be tested and repaired.

Condition: reconditioned (used), Precision guide and spindle lathe Make: GDW Model: LZ 250 S Kdedpfxepz Hubo Adqjr Year of manufacture: 1998 - overhauled, repainted RAL7035 light gray Mach. no.: 069 Centre height: 125 mm Centre width: 500 mm with guarantee geometric acceptance with test report Accessories: - 3-axis digital display ISKAR NP-20T-V with V = c for constant cutting speed - Quick-change tool holder base body size A - Bed stop - Coolant system - Chuck protection hood, electrically secured - Chip rear wall - Operating instructions - Used as seen -

Condition: new, wheel diameter 250 mm grinding wheel size 250 x 25 x 20 mm turning speeds 2850 U/min voltage 400 V total power requirement 2.0 kW weight of the machine ca. 23.0 kg. dimensions of the machine ca. 600 x 290 x 300 mm Furnishing: - Heavy design and high quality equipment - ideal for professional use - Ideal for matting, polishing - up to mirror-smooth surfaces of various materials - with the help of optionally available polishing discs and polishing pastes - Lockable ON-OFF switch according to IP54 with undervoltage release - Including motor with copper winding for a long service life - Standard with rubber feet for vibration-free work Kdjdpfx Adjxak H Sjqor - Very smooth running thanks to balanced rotor with quality ball bearings - Elegant machine body made from high quality die-cast - Suitable for polishing metal, plastic and non-ferrous materials Scope of delivery: - Soft polishing pad - Hard polishing pad - Operating instructions in German

Condition: new, grinding width 32.0 mm max. dia. of grinding wheel 250 mm grinding wheel size 250 x 32 x 32 mm turning speeds 2850 U/min Grain size K 36 / K 80 engine output 1.5 kW voltage 400 V weight 30.0 kg range L-W-H 510 x 320 x 360 mm scope of delivery : - Grinding disc K 36 - Finishing wheel K 80 - Spark protection on both sides Kedpsxaa Aijfx Adqsdr - workpiece support

Condition: ready for operation (used), Year of construction: 1989, Gear hobbing machine models FD-250, FD-500, FD-630, and FD-900 Manufacturer: CUGIR, ROMANIA Maximum module size: 6 to 12 mm Max. working diameter: 250 to 900 mm Accessories: change gears and arbors for all machines Kedpfx Aezuddtjdqsdr Videos showing all machines in operation are available!

Condition: new, *AVAILABLE IMMEDIATELY* Including hand pump / all-steel floor Technical Data: • Brand: Martz • Model: KIPPER 250 S • Vehicle type: Rear tipper trailer • Condition: New vehicle • Initial registration: Not yet registered • TÜV inspection: 3 years from initial registration • Internal dimensions (LxWxH): 253 x 152 x 30 cm • External dimensions (LxWxH): 371 x 164 x 111 cm • Permissible total weight: 750 kg • Unladen weight: 323 kg • Payload: 427 kg • Chassis: High-loader (wheels located under the body) • Tyres: 165/70R13 • Axle: KNOTT rubber torsion axle • Jockey wheel: Yes • 100 km/h approval: Yes DESCRIPTION • Double-walled, anodised aluminium side panels • All side panels can be folded down and removed • Removable steel corner posts • Insert sockets at all four corners for fitting tarpaulin frames, mesh sides, side wall extensions, or headboard extension • Plastic tie-down buttons mounted to the side panels for fastening nets or flat tarpaulins • Sturdy eccentric locks • 44° tipping angle • 100 km/h manufacturer approval • Robust full steel floor • Reinforced V-drawbar • Strong welded steel frame • Frame fully hot-dip galvanised by immersion bath • Multiple cross-beams for increased point load capacity • Double-acting hand pump for manual tipping • 6 certified lashing rings set into the side rails (600 DaN/kg) • Unbraked rubber-sprung KNOTT axle • 13-pin plug • Reversing lights • Large, high-visibility safety lighting • Integrated rear fog light • Rear frame lighting recessed for protection • Central jockey wheel Optional extras – On request: • Mesh sides • Side wall extensions • Cover net • Flat tarpaulin • Anti-theft device • Spare wheel • Tool box • Reversing lights • Lashing straps • and much more New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery possible Kdedpfx Adox Tbk Deqor - All prices incl. VAT - Registration documents can be sent in advance or export plates (Germany) can be provided - Export plates including customs registration available Descriptions and images are copyright protected! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available from stock! We have been authorised dealers and service partners for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years - Subject to errors, omissions and prior sale -

Condition: good (used), Year of construction: 1981, HOT PRESS PLATE DIMENSIONS: 2500 X 1300 MM HEATING OF THE PLATES BY HOT WATER 6 HYDRAULIC CYLINDERS FROM THE BOTTOM SIDE MAX. OPENING BETWEEN PLATES: 450 MM TOTAL PRESSURE: 120 Tons GOOD CONDITION Kodpfxswup U He Adqjdr

Condition: used, Piston Compressor KAESER Type EPC 630-250 Serial No.: 1802334 Year of manufacture: 1992 Free air delivery at 6 bar: 440 liters/min. Maximum intake capacity: 630 liters/min. Output pressure: 10 bar Tank capacity: 250 liters Motor power: 3 kW Connection: 400 Volt, 50 Hz (with 16 Amp plug) - 2-cylinder, oil-lubricated - Pressure switch set to 10 bar - Run time from 0 bar to switch-off pressure of 10 bar = 5 min Space required (L x W x H): 750 x 700 x 1750 mm Weight: approx. 150 kg In good condition Kdsdpfx Aswypqrodqjr

Condition: used, Year of construction: 2020, functionality: limited functionality, overall weight: 150 kg, GRUNDFOS Electronically Controlled Dry-Running Pump TPE 100-250/2-S A-F-A-BAQE-ND1 Single-Stage Inline Pump Art. 99114824 PN16. 3 x 380-500 V DN100 with MGE160MH-2-FF300-JA Motor We are offering the Grundfos electronically controlled dry-running pump. ⭐︎ Condition: Good (used) The electronically controlled dry-running pump is used but fully operational. The pump was functioning flawlessly up until removal a few weeks ago. Manufacturer: Grundfos Model: TPE 100-250/2-S A-F-A-BAQE-ND1 Description: Single-stage inline pumps with speed-controlled MGE motor Frequency converter: integrated Pump speed: 2930 rpm Rated flow: 135 m³/h Rated head: 20.1 m Mechanical seal: BAQE Pump housing: Cast iron Impeller: Cast iron Kedpfx Aeyc T Apjdqodr Gross weight: 157 kg For further technical details, please refer to the nameplate. Scope of delivery as shown. Inspection prior to purchase is possible and expressly encouraged. 2 units available. Price: per unit #Shelf 21-1-9 Shipping possible, but buyer pays shipping costs. Single-stage volute pump with opposing suction and discharge ports in inline design. Suction and discharge ports have the same diameter. The pumps are constructed according to the top-pull-out principle, i.e., the pump head (motor, headpiece, and impeller) can be easily removed for servicing or maintenance while the pump housing remains in the piping. The pump is equipped with an unbalanced rubber bellows seal. The mechanical seal complies with EN 12756. Piping connection via DIN flanges PN 16 according to EN 1092-2 and ISO 7005-2. The pump features a fan-cooled permanent magnet synchronous motor. The motor efficiency corresponds to energy efficiency class IE5 according to IEC 60034-30-2. For speed control, the motor is equipped with a frequency converter and PI controller, both integrated into the motor terminal box. Electronic speed control enables continuous adaptation of motor speed and thus pump output to current demand. The pump is equipped with a differential pressure sensor.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, clamping force: 250 kN, screw diameter: 25 mm, clearance between the columns: 270 mm, displacement volume: 39 cm³, injection weight: 36 g, mold height (min.): 200 mm, power: 10.2 kW (13.87 HP), Year of manufacture: 2003 Clamping force: 25 tons Kjdpjxgiaqjfx Adqsdr Distance between columns: 270 x 270 mm Screw diameter: 25 mm Injection volume: 39 cc Injection weight: 36 g for PS Equipment: Conveyor belt, sprue picker, core puller, Euromap Fully inspected! PRICE REDUCED FROM 6500 TO 5500 EUR!!!

Condition: new, functionality: fully functional, empty load weight: 468 kg, maximum load weight: 1,532 kg, overall weight: 2,000 kg, loading space length: 2,530 mm, loading space width: 1,640 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, MARTZ Tipper 250/2 C S 2T NEW VEHICLE Internal dimensions: 253cm x 152cm Sidewall height: 30cm Platform height: 80cm Gross weight: 2000kg Payload: 1532kg Braked tandem trailer Overrun brake and handbrake by KNOTT 2x axles with 1350kg brakes Low chassis Fully welded hot-dip galvanized steel frame Aluminium profile side panels with tension latches Fold-down and removable on all sides Galvanized steel floor Support wheel 6 lashing eyes Reinforced 13" C-rated tyres with steel valve M+S tyres Mesh/rope hooks on the frame 13-pin plug Front marker lights Rear lamps with reversing, fog lights and triangular reflectors Top frame mounted on rubber bushings Hand pump with stowable handle Safety lock for top frame OPTIONAL ACCESSORIES PERMANENTLY DISCOUNTED FROM FEBRUARY 2026 - 100km/h equipment (shock absorbers) - Spare wheel with holder - Loading ramps - Folding crank rear supports - Full LED lighting - Anti-theft device - Mesh netting (fine or coarse) - H-frame - Leaf mesh sides in various heights, also closed - Extension side panels in steel or aluminium 30cm with tension latch - Flat cover, with or without hoops - High cover, 140cm Additional accessories available on request! Plus shipping to Gera and vehicle registration certificate: €200 net Pictures are for illustrative purposes and may show accessories subject to surcharge. Haven't found the right trailer yet? We have 50–100 vehicles in stock and available for immediate pickup at all times. Our workshop is open on weekdays from 8:00 to 17:00 for all types of repairs. Kdjdew A I Etopfx Adqsr Specialist in axle repairs, including for caravans. In addition, we have a large range of spare parts and accessories, also for trailers from different manufacturers. Visit us online or come by in person!

Condition: excellent (used), Year of construction: 2002, Arburg 270 S-250 - 60 Clamping force: 25 tons Year of manufacture: 2002 Kedjx I Rdvopfx Adqjdr Tie bar spacing: 27 x 27 cm Control system: S Includes conveyor belts

Condition: used, power capacity 26 kW volt 200 V ampere 139 A revolutions per minute 1150/3450/6000 U/min Kedpjy S D Ivefx Adqedr For sale is a functional MITSUBISHI SJ-26BZ spindle motor AC spindle motor 15kW for Mazak machines WEIGHT: approx. 230kg

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Characteristics * Speed 350 m/min * 500 cuts/min Kdjdjvphiyepfx Adqor * 8 unwinding stations * 10 cutting blades (pair) * 2 sets of cutting blades * Cutting capacity (set) 540 gsm * Cross cutter max.load 805 gsm Sheet output * Paper sheet width min: 350 mm * Paper sheet width max: 2200 mm * Paper sheet length min: 400 mm * Paper sheet length max: 1650 mm * Stack height incl.pallet: 1800 mm * Stack weight incl.pallet: 5000 kg Roles input * Roll diameter min: 500 mm * Roll diameter max: 1500 mm * Roll weight max: 5000 kg * Sleeve diameter min: 76 mm * Sleeve diameter max: 150 mm

Condition: used, Second-hand Mitsubishi MELSEC PLC Models available: FX-16MR FX-4AD FX-20DU Kedpoztny Asfx Adqjdr Technical data: - See pictures

Condition: ready for operation (used), Year of construction: 2015, Three identical Ishida packing robots are available, suitable for ready meals, meat, poultry, fish and seafood, fresh fruit and vegetables, salads, dairy products, fruit and confectionery. Max. throughput capacity: 80 products/min, max. speed infeed belt: 0.6m/s, max. speed crate conveyor: 0.6m/s, frame dimensions: 2000x1600x2600mm, weight: 1.2t. With documentation, an on-site inspection is possible. Kodpfjvmgt Eex Adqedr

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, machine/vehicle number: TD2002/0365, DEMAG KBK overhead crane, span approximately 4x4m – expandable upon request! Load capacity / lifting capacity: 500 KG - 0.5 tons Technical data of the system: Overhead crane track made of Demag KBK2 rails The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, supports/hangers, etc. Includes Dalmec manipulator PFS 120KG NL Articulating boom, rotatable 360 degrees, with approximately 3m reach The crane is disassembled and immediately available Very good condition, see pictures The item is located in 75053 Gondelsheim Kdedpoztutvefx Adqsr Shipping via freight forwarder or collection only by prior appointment Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems are also available. Load capacity 125KG - 1600KG Please inquire about your overhead crane with the required load capacity and dimensions.

Condition: used, mileage: 107,532 km, power: 129 kW (175.39 HP), first registration: 05/2024, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, loading space volume: 36 m³, loading space length: 6,100 mm, loading space width: 2,460 mm, loading space height: 2,450 mm, Equipment: ABS, air conditioning, central locking, * Driver airbag * ABS * ASR * ESP * Active Brake Assist * Lane Keeping Assist * Engine Start/Stop System * Radio * On-board computer * Cruise control * Electric windows * Electrically adjustable mirrors * Heated mirrors * Central locking * Fog lights * Automatic headlights * Rear window * Driver's suspension seat * Passenger bench seat * LED headlights * Air intake (top) * Roof spoiler * 6-speed * Suspension: leaf spring * Payload: 3300 ----Special body: Tail lift: Bär BC 1000 S2, load capacity: 1,000 kg, shield height: 1,800 mm, aluminum, floor control + cable remote control.----Body: Wielton platform body/tarpaulin + rails, hardwood floor, lashing eyes. Subframe and platform base are galvanized. Kedpfx Adezr Aldeqsdr For sale only to commercial businesses. IN CASE OF EXPORT, ONLY THE NET PRICE IS TO BE PAID!!!!! ALL INFORMATION WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. Our general terms and conditions (see imprint) form the basis for all purchase contracts, invoices, proforma invoices, orders, and sales negotiations.

Condition: ready for operation (used), Mitsubishi K0J1E-E56DR Melsec-K controller, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Kdjdpsi Eb Ndjfx Adqer