Used Smicon Belt Press for sale (21,017)

Condition: used, Year of construction: 2001, Continuous press Manufacturer: Ligmatech Type: Optimat MDE 10 Year of manufacture: 2001 Technical data Body dimensions - Length: 300 - 2500 mm - Height: 300 - 1300 mm - Depth: 120 - 600/800 mm - Pressing forces are generated electrically, both horizontally and vertically, and can be varied independently - Pressing forces are applied vertically via a pressure plate and horizontally via 3 pressure jaws each - Pressing takes place centered and on a zero line on the operator side Hnsdszuzxbjpfx Aater Positioning of the pressure jaws: - Top pressure jaw with forced guidance on the top press, optionally lowerable via cylinder - Middle pressure jaw freely programmable and motor-driven - Bottom pressure jaw freely programmable and movable via a common drive with the middle pressure jaw Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2017, Automatic cold press Manufacturer: CMB Type: PFR-CCL Year of manufacture: 2017 Technical data: Motorized loading table 3,500 x 1,600 mm for manual assembly of the plates and automatic loading into the press on the 1,600 mm side. Structure made of welded steel profiles. Devices for adjusting the working height to compensate for unevenness in the floor. Steel rollers. Foot switch. PRESS Plate size: 5,500 x 1,600 mm Loading side: 1,700 mm Stroke: from top to bottom Opening: 450 mm Cold press The plates are made of steel sheet and attached to a steel frame structure. Maximum pressing force: 160 tons. Specific pressure (on 100% of the area): 1.82 kg/cm2 Specific pressure (on 80% of the area): 2.27 kg/cm2 Pressure cylinder: 12 x 80 mm Auxiliary cylinders: 6 x 50/30 mm Power supply: 400 Volt EU/50 Hz/3 PH. + G AUTOMATIC LOADING and UNLOADING of the plates on the lower plate, on the 3,500 mm side. The transport is carried out via a motorized MYLAR belt. The belt is activated by 2 rollers, one of which is located at the entrance and one at the exit of the press. The rollers are driven by a motor with a chain that slides on special guides. The Mylar belt rotates around the lower plate, which rests on special side supports. The belt rotates on 2 rollers, which are located at the entrance and exit of the press. The ends of the MYLAR belt are attached to special rods with devices for tensioning the MYLAR. The upper plate is covered with a Mylar film. The press plates consist of thick steel sheets that are welded to the frame structure. HYDRAULIC UNIT with pump, oil tank and valves for operating the pressure cylinders and auxiliary cylinders that move the upper plate. The hydraulic control unit is located in the upper part of the press to facilitate maintenance. CONTROL PANEL with buttons and switches. Pressure control manometer on the front of the press. UNLOADING MOTORIZED ROLLER TABLE 2,000 x 1,600 mm The unloading table is located at the exit of the press for manual unloading of the pressed plates. Exit side from the press: 1,600 mm. Note: The loading table of the press with the dimensions 3,500 x 1,600 and the unloading table with the dimensions 2,000 x 1,600 are shorter than the press table with the dimensions 5,500 x 1,600, as the press was installed in a line. Note: Hedpszuzw Dofx Aatonr The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1996, Continuous press Manufacturer: OTT Type: 300-K-D0 Year of manufacture: 1996 Technical data Plate dimensions: 2550 x 1350 mm Hot water heating 6 pressure cylinders Total pressing force: 135 t Hnedpfx Aaozuzwwoter Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: used, Year of construction: 2007, Lamination press Manufacturer: Dimter Type: PROFIPRESS L2500 Year of manufacture: 2007 Technical data Wood dimensions to be processed Wood width, panels: 30 - 150 mm Wood thickness: 11 - 60 mm Wood inlet length: 800 - 2500 mm Panel widths, variable: max. 1300 mm Specific pressing pressure for cross-sections of 2500 x 60 mm: up to 1.6 N/mm2 The pressing surface per press cycle must not be smaller than 100 cm2 Filling width of the press per cycle: min. 650 mm / max. 1300 mm Max. filling area of the press per cycle: 3.25 m2 (The max. usable press width depends on the widths of the individual lamellas.) Wood type Softwood/hardwood Press without options Electrical connection, press: 7 kW Electrical connection, 40 kW generator: 56 kW Operating voltage: approx. 400 Volt / 50 Hz (C/s) Collection table extended to 3700 x 1300 mm, with stainless steel wood support Motor-driven multi-function slider Lamination press Profipress L 2500 Press bed area approx. 2500 x 1300 mm Sturdy base frame with lower press table made of stainless steel as a grounding electrode Quick-change stop guide sets for panel thicknesses of 19 - 40 mm, which can be hydraulically adjusted to the current filling width Hydraulic special pressure elements ensure uniform pressure distribution over the entire joint length and compensate for tolerances In multi-lane operation, filling widths may vary by a maximum of 15 mm Upper pressure plate with hydraulic drive generates high vertical pressing pressure for minimal displacement Integrated hydraulic unit for generating pressing force and driving the hydraulic motors Control cabinet and control panel Protective cladding Additional individual pressure elements from above Automatic gluing station with precision gluing head Infeed for different widths Camera Washing and rinsing device for gluing head Modem incl. software for online connection Hjdpfx Aszuzwqeatenr Note: The technical data and descriptions are copies of the order confirmation from that time. The information is provided for informational purposes only and is non-binding.

Condition: used, Year of construction: 2019, Corpus press Manufacturer: LINYI JIANZHONG WOOD MACHINERY Type: JJZ-CP Year of manufacture: 2019 The JJZ-CP press is suitable for the production of plywood, doors, and MDF panel joints. The feeding and removal of the glued elements are carried out automatically via powered roller conveyors. Technical data - Max. pressure 500 t (adjustable) - Max. filling height 1300 mm - Min. filling height 900 mm - Max. filling size 1300 x 2500 mm - Press dimensions 3600 x 1370 x 4500 mm - Press placement approx. 500 mm below floor level - Feeding table 2000 x 1960 mm Hnedpfx Ajzuzwksatsr - Receiving table 2350 x 2500 mm - Max. power 13.2 kW - Weight 12000 kg - CE marking - Capacity: 6 batches per hour 2 corpus presses are available for sale. Note: The technical data and descriptions are transcriptions from the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1998, Continuous body press Manufacturer: LIGMATECH TYPE: MPP 15 Year of manufacture: 1998 The MPP 15 is a flexible press for batch-related production without setup times. The MPP 15 can be used individually or in various combinations in an assembly line. The pressing forces are applied pneumatically. The separately adjustable vertical and horizontal pressure allows for pressing both horizontal and vertical bodies. The vertical forces are transmitted through a plate, while the horizontal forces act on the body via press cheeks. The position of the center press cheeks can be adjusted using adjustable stops, allowing for different heights of bottoms and sides. During the infeed process, the body is measured photoelectrically, which automatically positions the horizontal pressure bar. Technical data: Body dimensions: Length: min. 300 mm / max. 2300 mm Height: min. 300 mm / max. 1220 mm Depth: max. 600/800/1000 mm (depending on the press type) Pressing pressure: vertical max. 17 kN Hjdpfxozuzv Tj Aatsnr horizontal max. 16 kN Working height: 500 mm Transport speed: min. 8 m/min. / max. 37 m/min. Pressing time: selectable up to 999 s Operating voltage: 400 V, 50 Hz Control voltage: 24 V DC (according to VDE) Required air pressure: 5...8 bar Air consumption: 120 NL/cycle Total connected load: 3 kW Weight: approx. 4 tons Required room height: 3000 mm Extended infeed belt as a staging area Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2000, Corrugated board press Manufacturer: Hüttenhölscher Year of manufacture: 2000 Technical data Hnodpfxszuzvmj Aater Voltage: 400 V Current: 32 A Frequency: 50 Hz Compressed air: 6 bar Note: The technical data and descriptions are a transcript of the order confirmation from that time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2001, Short-cycle pressing line Manufacturer: Wemhöner Type: KT-F-1E Year of manufacture: 2001 Technical data - Pressing area: 5,750 mm x 2,200 mm - Operating side: left Hjdezuzi Tspfx Aatsnr - Plate dimensions: Length: 2 x 2,600 mm - 2 x 2,620 mm Width: 2,070 mm Thickness: 6 mm - 40 mm - Pressing pressure: approx. 40 kg/cm² Note: Upon request, the complete layout plan of the system can be sent. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: used, Paint line Paint line consisting of: Vacuum loading system Technical data - 2-strand - Roller width: approx. 1000 mm Wide belt sanding machine Manufacturer: Büftering Type: Classic 213EB Year of manufacture: 2000 Technical data - Working width: max. 1350 mm - Vacuum conveyor belt - Electronic sanding pad Belt conveyor system Manufacturer: Belting Year of manufacture: 2019 Technical data - Dimensions: 6100 x 1000 mm Dust extraction system Manufacturer: Heesemann Type: EA2 Year of manufacture: 1990 Paint application machine Manufacturer: Bürkle Type: DAL1-1300 Year of manufacture: 1993 Throughfeed drying tunnel Manufacturer: Bürkle Technical data - with UV lamp Paint application machine Manufacturer: Bürkle Type: DAL1-1300 Year of manufacture: 1993 UV drying tunnel Manufacturer: Elmag Type: Ti166-35+2iVM1-65 Technical data - equipped with 2 UV lamps Wide belt sanding machine Manufacturer: Büftering Type: Optimat SCO 313QHQ Year of manufacture: 2007 Technical data - Working width: approx. 1350 mm - Machine equipped with 3 sanding units (cross-longitudinal-cross) 4-tier intermediate buffer Technical data - Tier size: 3000 x 1350 mm Dust extraction system Manufacturer: Cefla Type: TN3500/TT Year of manufacture: 2004 Paint robot Manufacturer: Cefla Type: Spraybotic MD Year of manufacture: 2004 Technical data - Throughput width: approx. 1350 mm - Automatic spray arm with 4 spray nozzles - Pump station with 5 Graco paint pumps Intermediate transport Manufacturer: Cefla Type: TN3591/TT Year of manufacture: 2004 Throughfeed multi-level dryer Manufacturer: Cefla Type: VN 2000/3/7500/300-24 Year of manufacture: 2004 UV drying tunnel Manufacturer: Venjakob Year of manufacture: 2008 Technical data - Infeed conveyor belt - 4 UV drying lamps (1 below, 3 above) - mounted on 2 belt conveyors Venjakob Belt conveyor Manufacturer: Cefla Type: TN3500/E Year of manufacture: 2004 Technical data - Conveyor length approx. 3500 mm Belt conveyor Manufacturer: Cefla Type: TT/1V/3750 Year of manufacture: 2004 Technical data - Conveyor length approx. 3750 mm Hnsdpfszuzhijx Aatsr Roller conveyor Technical data - Roller width: 1700 mm - Conveyor length: 3750 mm Edge sanding and brushing machine Technical data - with alignment table - 3 sanding units for cross and longitudinal processing of door leaf edges Belt conveyor Manufacturer: Belting Technical data - Conveyor length: approx. 4000 mm - Belt width: approx. 1170 mm Turning system for door leaves Manufacturer: Kraft Year of manufacture: 2018 Individual components of the system can be purchased separately as follows: Vacuum loading system €10,000.00 Büftering Classic 213EB wide belt sanding machine €12,000.00 Belting belt conveyor €3,500.00 Heesemann EA2 dust extraction system €2,500.00 Bürkle DAL1-1300 paint application machine No. 1 €7,500.00 Bürkle throughfeed drying tunnel €9,000.00 Bürkle DAL1-1300 paint application machine No. 2 €7,500.00 Elmag UV drying tunnel €13,000.00 Büftering Optimat SCO 313QHQ €15,000.00 4-tier intermediate buffer €10,000.00 Cefla TN3500/TT dust extractor €4,000.00 Cefla Spraybotic MD incl. pump station €50,000.00 Cefla TN3591/TT intermediate transport €4,000.00 Cefla VN 2000/3/7500/300-24 multi-level dryer €20,000.00 Venjakob UV drying tunnel €13,000.00 Cefla conveyor belt TN3500/E €2,500.00 Cefla conveyor belt TT/1V/3750 €2,500.00 Roller conveyor €2,000.00 Edge sanding and brushing machine €5,500.00 Belting conveyor belt €2,000.00 Kraft turning system for door leaves (2018) €20,000.00 Note: T

Condition: used, Year of construction: 1998, - Lengths: 1,800 - 2,300 mm - Widths: 500 - 1,300 mm - Thicknesses: 35 / 40 / 44 mm Door pressing system Manufacturer: Wild Year of manufacture: 1998 For door dimensions: - Lengths: 1,800 - 2,300 mm - Widths: 500 - 1,300 mm - Thicknesses: 35 / 40 / 44 mm Consisting of the following sections: 1. Continuous door panel gluing with frame assembly station / 2. Pressing line with hardboard facing station Section 1 consists of: - Gantry loading system - Angle transfer with longitudinal and cross saws - Loading and feeding of the longitudinal and transverse frame parts from magazines - Longitudinal cutting station for the longitudinal frame parts - Connecting station of the frame parts with the door panel core. With clamping devices - Conveyor belt angle transfer with shuttle transfer of the door panel cores onto the glued hardboard Section 2 consists of: - Loading of the hardboard - Brush cleaning machine Hodpszuzgrsfx Aatonr - Hardener application machine from below - Glue application machine from below - Roller conveyor - Angle transfer for the lower hardboard - Vacuum reversing device for the upper hardboard - Automatic facing station for hardboard and door panel cores - 2 door presses, each with 2 x 4 pressing stations, arranged parallel to each other - Both presses are loaded at the infeed with 1 shuttle loading basket - Both presses are unloaded at the outfeed with 1 shuttle unloading basket - Angle transfer to the infeed into a hedgehog buffer - Angle transfer at the outfeed of the hedgehog buffer and feeding to the stacking station - One-sided vacuum stacking with protective plate space Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2006, Wide belt sanding machine Manufacturer: Viet Type: S3 223TM Year of manufacture: 2006 Technical data - Sanding width 1300 mm - 1st cross belt unit - 2nd combination unit for calibration and sanding shoe - The sanding shoe is equipped with feeler segments at 25 mm intervals and is also ideally suited for sanding lacquered surfaces - Brush roller for dust removal from the sanded surfaces - Vacuum transport belt - Ionization bar to prevent static charging at the machine outlet Hnjdpozuzcysfx Aatsr - The control display was replaced with a new one 2 years ago Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2021, - Grinding width: 1100 mm - Grinding height: 3 - 170 mm - Grinding length: 1900 mm Wide-belt sanding machine Manufacturer: Felder Type: FW 1102 P Hjdpfxjzuzcmo Aatenr Year of manufacture: 2021 Technical data - Contact roller unit - Fine sanding with segmented, electro-pneumatic sanding shoe, 25 mm segment width - Touchscreen color display 7" - Digital grit adjustment - Vacuum table incl. blower in the machine frame - Stepless feed speed 2.5 - 18 m/min, controllable from the touchscreen - Grinding width: 1100 mm - Grinding height: 3 - 170 mm - Grinding length: 1900 mm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2007, Wide-belt sanding machine Manufacturer: Kündig Type: Premium-2 1100-RE Year of manufacture: 2007 Technical data: Working width: 1100 mm Hedpfszuza Ssx Aatjnr Working height (max.): 200 mm Sanding roller Sanding shoe for finish sanding Belt cleaning Vacuum 400 V, 50 Hz, 24 VDC 57.5 amps 28.4 kW Includes loading Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2013, Ref:11118 . 2013 Schmedt Präleg & Präform Casing-in & Pressing Machines. For casing-in a variety of thin to thick books into flexible or hard cases. Special features:- • Programme selection via touch-screen monitor • Very short set-up and strip down times • Auto wash-up of glue rollers after each book Vertical wing action Twin PVA cold glue tanks Hjdpfx Aaozkgdzjtsnr Working in conjunction with:- 2008 Schmedt Präform 2100 Pressing & Joint Forming Machine. For pressing a variety of thin to thick hard cover books immediately after casing-in. Suitable for single or assorted books, pressing & burning in the joint in a single operation. Specification, Praleg 18-60: Block height: 80 – 450 mm Block width: 110 – 450 mm Block thickness: 2 – 80 mm Production rate: approx. 200 – 300 pcs/h Specification, PraForm 2100 Book press with groove cutter. Maximum format: 420 x 520 x 100 mm Power supply: 230 V + compressed air.

Condition: used, Year of construction: 2020, total length: 2,450 mm, total width: 1,900 mm, total height: 2,140 mm, Weight: 5.500 kg - Year: 2020 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Drive system: CNC - Control system brand: Delem - Control system type: DA-41s - Power [kW]: 4.0 - Number of axes [pcs]: 4: Y1+Y2+X+R - Press force [ton]: 40 - Max. working width [mm]: 2000 - Column gap [mm]: 1800 - Throat depth [mm]: 200 Hedpfx Ajzr Inwoatonr - Backgauge depth [mm]: 750 - Max. stroke [mm]: 100 - Crowning system: None - Punch holder: Quick-release - Tool holder type: European-style - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 2450mm x 1900mm x 2140mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1999, total width: 1,800 mm, total height: 2,320 mm, total length: 1,700 mm, Colour: White Empty weight: 2.500 kg - Year: 1999 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 99125681 - Number of units [pcs]: 2 - └ Unit 1: - - Position: Top - - Type of unit: Contact roller - - Sanding belt length [mm]: 1890 - - Sanding belt width [mm]: 1110 - - Roller diameter [mm]: 175 - - Roller material: Rubber - - Motor power [kW]: 18.5 Hsdpozr Hx Uefx Aatenr - └ Unit 2: - - Position: Top - - Type of unit: Contact roller - - Sanding belt length [mm]: 1890 - - Sanding belt width [mm]: 1110 - - Roller diameter [mm]: 1750 - - Roller material: Rubber - - Motor power [kW]: 18.5 - Max. working width [mm]: 1100 - Min. working height [mm]: 30 - Max. working height [mm]: 183 - Infeed table length [mm]: 400 - Outfeed table length [mm]: 250 - Feed motor [kW]: 0.75 - Voltage [V]: 380 - Current consumption [A]: 36 - Fuse [A]: 63 - Transport dimensions: 1700mm x 1800mm x 2320mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2018, operating hours: 40,350 h, Baling press Presona LP 85 VH2, year of manufacture 2018 Technical data: Manufacturer: Presona Sweden Type: LP 85 VH2 Year of manufacture: 2018 Drive power: 2 x 45 kW Operating hours: 40,350 Effective operating hours: approx. 22,000 Pressing force, pre-press: 28 t Pressing force, main press: 85 t Feed hopper dimensions: 1500 x 1100 mm Bale dimensions: 750 x 1100 mm Bale weight: 450 - 650 kg Theoretical volumetric output: 1200 m³/h Throughput capacity at 30-100 kg/m³: 13-30 t/h Tying: 5-wire vertical, (3-wire horizontal) Oil tank volume: 2000 L Transport dimensions, press: 10400 x 2400 x 2800 mm (L x W x H) Weight: approx. 27,000 kg Materials: Paper, cardboard, PET bottles, film, light waste. Note: The press is in good condition. It has been dismantled from ongoing operation. The following work has been carried out by us: New wear plates in the press channel Hnsdpfx Aaozulknotsr Complete replacement of seals on the main cylinder Oil filter changed Vertical tying mechanism overhauled and made operational The horizontal tying mechanism is currently not functional. The technical documentation is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: used, functionality: not functional, total length: 5,150 mm, total width: 130 mm, total height: 1,800 mm, overall weight: 1,200 kg, Heudra auger pump with conveyor belt. This system can be used for the disposal of, for example, fruit waste. The substance is fed onto the conveyor belt, which then transports it to a hopper. From the hopper, the substance is pumped away by an auger pump. Hedozuyzbepfx Aatenr The machine is entirely made of stainless steel; the conveyor belt is made of plastic. Dimensions (w x l x h): 130 x 515 x 180 cm Dimensions of conveyor belt: 70 x 300 cm Dimensions of hopper: 80 x 60 x 90 cm deep The control panel for the motors is included, but the control system is missing.

Condition: ready for operation (used), Year of construction: 2009, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2009 Pressing force: 532 kN Hnedozuxv Dspfx Aatsr Voltage: 400 V Max. bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening: 119.5 x 65 cm Condition: very good! Video of machine in operation available on request.

Condition: ready for operation (used), Year of construction: 2012, Brand: DIXI Model: 60 SD Year of manufacture: 2012 Pressing force: 60 tons Voltage: 400 Max. bale weight: 340-500 kg Bale dimensions: approx. 120 x 80 x 80-110 cm Hnedpfx Aaszuxrxotjr Machine weight: 2400 kg Machine dimensions: 190 cm wide x 140 cm deep x 230 cm high Dimensions of the feed opening: 115 cm wide x 80 cm deep x 55 cm high The DIXI 60 SD features simple operation, an automatic start function, and automatic bale ejection. Thanks to its compact, low-profile design, this machine is ideal for spaces with limited height.

Condition: ready for operation (used), Year of construction: 2013, Brand: HSM Type: V-Press 1160 plus Year of manufacture: 2013 Pressing force: 532 kN Voltage: 400 Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Hnedpfx Aszuxqheater Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Feed opening dimensions: 119.5 cm x 65 cm The HSM 1160 V-Press features simple operation, a powerful pressing force, and is energy-efficient. Are you looking for a more compact model? Then take a look at the HSM 860 – ideal for those who want to save space without sacrificing pressing power.

Condition: used, Year of construction: 2016, - Year: 2016 Hnjdpjzry S Uofx Aater - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1967, total length: 2,000 mm, total width: 1,750 mm, total height: 2,850 mm, Colour: Grey Empty weight: 6.000 kg - Year: 1967 - Documentation available: No - CE certificate present: No - Serial number: 1166 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 100 - Max. stroke [mm]: 250 - Table length [mm]: 740 - Table width [mm]: 500 - Ram length [mm]: 250 - Throat depth [mm]: 350 - Transport dimensions: 2000mm x 1750mm x 2850mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Hodpozry Icofx Aatenr VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2023, total length: 1,400 mm, total width: 600 mm, total height: 2,180 mm, Colour: Blue Empty weight: 280 kg - Year: 2023 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: SA021 - Drive system: Conventional - Press model: Workshop press - Press configuration: Single-acting - Press force [ton]: 30 - Min. stroke [mm]: 0 - Max. stroke [mm]: 190 - Table length [mm]: 695 - Table width [mm]: 60 - Ram width [mm]: 60 - Max. opening height [mm]: 1000 - Height adjustment [mm]: 830 Hnjdpfx Aozry H Eeator - Transport dimensions: 1400mm x 600mm x 2180mm (l x w x h) - Transport weight [kg]: 280kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 1,250 mm, total width: 2,100 mm, total height: 3,300 mm, Colour: Green Empty weight: 7.000 kg Price: On request - Documentation available: No - CE certificate present: No - Drive system: Conventional Hsdszrxr Topfx Aatjnr - Press model: C-Frame press - Press configuration: Single-acting - Press force [ton]: 100 - Min. stroke [mm]: 20 - Max. stroke [mm]: 140 - Table length [mm]: 580 - Table width [mm]: 780 - Ram width [mm]: 400 - Throat depth [mm]: 315 - Max. opening height [mm]: 560 - Height adjustment [mm]: 70 - Pressing speed [mm/s]: 360 - Transport dimensions: 1250mm x 2100mm x 3300mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum