Used Schmidt F 3.1 Schneeräumschild for sale (33,542)

Condition: used, Max. saw blade diameter: 450 mm Motor power: 7.5 kW Max. cutting width: 800 mm Saw head: swiveling 45° Carriage length: 5000 mm Cedpsz H Txhjfx Adherh Saw blade bore: 30 mm Control panel: located at the bottom of the machine housing Height adjustment: hydraulic, via foot lever Swivel adjustment: hydraulic, via foot lever Swivel angle indicator: scale Cutting width indicator: scale Rip cutting length at the crosscut fence: 3200 mm Crosscut fence indicator: scale Crosscut fence design: fixed 90° PSV safety guard: Yes Storage location: Nattheim

Condition: excellent (used), Moog valve f. Battenfeld Mod D663Z4714 Crsdpfx Adsx Uq Afehjh Type L03HXBU4NSD2-0

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor Cjdpfxsyug Hxj Adherh • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs Crjdeyug R Ropfx Adhoh • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: used, Year of construction: 1998, Overview This Krones - Linapac F-T-1800 automatic bottle packer was manufactured in 1998 and was previously installed in a returnable glass bottling line. The machine is designed for the automatic packing of filled bottles into beverage crates and is typically positioned downstream of the filler and inspection systems. The LINAPAC packer series is widely used in high-capacity beverage production lines due to its robust design and reliable crate handling. The system supports a wide range of bottle formats and crate types commonly used in the beer and beverage industry. The machine was originally operated in a high-performance production environment and is suitable for integration into returnable glass bottling systems with similar capacity ranges. Technical Data Manufacturer: Krones Model: Linapac F-T-1800 Machine type: Automatic bottle packer Year of manufacture: 1998 Application: Automatic insertion of filled bottles into beverage crates Bottle Formats: - 0.25 L Individual bottle – Ø 57.5 × 215 mm - 0.33 L Ale bottle – Ø 61 × 236.5 / 238 mm - 0.33 L Ale bottle – Ø 68.5 × 234.5 mm - 0.5 L Ale bottle – Ø 68.5 × 270 mm - 0.5 L Steinie bottle – Ø 70.5 × 174 mm - 0.5 L Bavaria bottle – Ø 70 × 260 mm - 0.5 L NRW bottle – Ø 67 × 260 mm - 0.5 L Individual bottle – Ø 82 × 295 mm - 0.7 L GDB bottle – Ø 79 × 290 mm - 0.75 L GDB bottle – Ø 79 × 290 mm - 1.0 L GDB bottle (light) – Ø 84 × 305 mm - 1.0 L AMG bottle – Ø 83.7 × 298 mm Crate Formats: - 5 × 4 – 400 × 300 × 300 mm - 6 × 4 – 400 × 300 × 270 mm - 5 × 4 – 400 × 300 × 210 mm - 4 × 3 – 355 × 275 × 345 mm Codpoytq Taofx Adhorh - 4 × 3 – 400 × 300 × 330 mm - 5 × 4 – 355 × 275 × 255 mm - 5 × 4 – 400 × 300 × 290 mm Condition: Used Availability: On request

Condition: good (used), Hydraulic motor, oil motor, hydraulic pump, hydraulic gear motor Csdpfx Aewldupodhjrh -Manufacturer: Danfoss, hydraulic motor with gearbox -Hydraulic motor: Danfoss Type: OMP 50 151-0028 6 -Gearbox: Nord SK 01 FF i= 5.83 -Hole spacing: 106 x Ø13 mm -Shaft: Ø20 x 40 mm -Bolt circle: Ø 100 x 7 mm -Dimensions: 310/140/H180 mm -Weight: 13.5 kg

Year of construction: 2025, condition: used, HSK63-B,F Test Mandrel Suitable for Vollmer machine types: QWD 750 / QWD 760 / QWD 750 H / QWD 760 H / VPulse 500 and all models from the QXD series (200/250/400) Crjdpfx Ajwl Alaedhjh

Condition: used, mileage: 171,000 km, power: 130 kW (176.75 HP), first registration: 11/2013, fuel type: diesel, empty load weight: 7,295 kg, maximum load weight: 4,705 kg, overall weight: 12,000 kg, tire size: 265/70R19.5, axle configuration: 4x2, wheelbase: 4,760 mm, brakes: engine braking, color: red, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 3, total length: 8,740 mm, total width: 2,550 mm, total height: 3,450 mm, loading space length: 5,800 mm, loading space width: 2,420 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, cabin, central locking, crane, cruise control, low noise, trailer coupling, Vehicle location: Bovenden, Kz. House, 2x comfort seat, electric mirrors, air conditioning, sun visor, cruise control, Telligent automatic transmission, ABS (anti-lock braking system), revolving warning light, leaf-air suspension, towing hitch air-light-hydraulic, low-noise G1, lashing rails, foldable crane at the rear, 2-point hydraulic support, 1xhydraulic extension, green environmental badge Wheelbase: 4760 mm, Body: flatbed with Fassi rear crane, type 95A21, foldable. Load diagram 2.0m-4,420kg, 4.10m-2,210kg, 5.9m-1,545 kg, hook operation, EURO 5 EEV engine Cedpfx Aswqdypedhsrh Flatbed as new, from year 2020 FASSI F95A21 crane - year 2007 Crane: 2.0m=4420kg, 4.1m=2210kg, 5.9m=1545kg (3 x mechanical extensions possible to retrofit for a surcharge then up to 12.0m=570kg) ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale and errors! - .

Condition: used, mileage: 62,800 km, power: 115 kW (156.36 HP), first registration: 08/2016, fuel type: diesel, empty load weight: 3,292 kg, maximum load weight: 4,198 kg, overall weight: 7,490 kg, tire size: 245/70R17.5, axle configuration: 4x4, wheelbase: 2,750 mm, next inspection (TÜV): 02/2026, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 2, loading space length: 2,950 mm, loading space width: 1,700 mm, loading space height: 400 mm, Equipment: additional headlights, all wheel drive, cabin, differential lock, onboard computer, power assisted steering, trailer coupling, Vehicle location: Bovenden, steel body, short cab, 1 air-suspended seat, rear window, heated mirrors, electric window left, electric window right, switch 6, auxiliary drive, raised exhaust, differential lock, work lights, rotating beacon, leaf spring suspension, trailer hitch ball head, towing device, winter service equipment, tie-down eyes, U-guard, side aluminum fender, swing-out side guards, green environmental badge. Crodpfx Adjyap Ayoheh Wheelbase: 2750 mm, body: 3-sided tipper body, differential lock on front and rear axle, 3-pole socket on the outside for winter service lighting, winter service lighting with 4 spotlights & rotating beacon, 13-pole socket on the outside for rear mounting for trailer operation, hydraulics, 2-circuit hydraulics: movement 30l/200 bar & performance hydraulics 50l/min 180 bar, 1 performance hydraulics line running to the front left with leak oil line, continuous operation on circuit 1 with 30l 250bar, front mounting plate DIN B size 3. Operating hours: 2273h. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.37 kW -Speed range without angular gear: 170-1000 rpm -Speed range with angular gear: 22.5-133 rpm -Motor: adjustable -Hollow shaft: Ø 24 mm -Construction: B14 angle -Number: 1 piece of motors available -Price: per piece -Dimensions: 460/190/H200 mm -Weight: 17 kg Cedpfx Asc I Rk Nedhjrh

Condition: as good as new (ex-display), Year of construction: 2026, Combination 4-in-1 machine HOLZKRAFT CU 300 Classic F 23 N -- Technical Data -- - Circular Saw - Beam length 2,250 mm Max. saw blade diameter 315 mm Max. cutting height at 90°/45° 103 / 82 mm Max. support width to the left of the saw blade 2,310 mm Cutting width with parallel guide 820 mm Saw blade tilt 90° - 45° - Jointer - Working width 300 mm Jointer table length 1,510 mm Cutterhead diameter / Number of cutter knives 72 mm / 3 pcs. Crjdpfsci Tvhjx Adhjh - Thicknesser - Table dimensions 300 x 585 mm Min./max. working height 3 / 230 mm Max. material removal 4 mm Feed rate 7 m / min - Table Router - Usable spindle length 100 mm Max. tenon tool diameter 275 mm Max. tool diameter 210 mm Spindle speed 3,500 / 7,000 / 10,000 rpm Spindle diameter 30 mm - General - Motor power 400 V / 50 Hz, 3 x 5.0 kW (6.6 hp) Dust extraction port diameter 4 x 120 mm Dust extraction port diameter on saw blade guard 60 mm - Promotional Price - Location: In stock, 54634 Bitburg

Condition: new, empty load weight: 6,900 kg, maximum load weight: 28,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 11,000 mm, loading space width: 2,420 mm, loading space height: 2,000 mm, loading space volume: 53 m³, total length: 12,050 mm, total width: 2,550 mm, total height: 3,900 mm, suspension: air, tire size: 385 / 65 R 22,5, color: silver, Year of construction: 2009, gearing type: other, driver cabin: other, Vehicle location: in feed / in transit, aluminum body, 3-axle, SAF axles, grain outlet, portal doors Crsdovhg Hbspfx Adhsh Body: Body approx. 53.2m³, ARCHIVE PHOTO! Drum brakes, The vehicle is still under construction and will be completed! Location: Hoym ( FAG ) ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: new, empty load weight: 6,400 kg, maximum load weight: 28,600 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 10,500 mm, loading space width: 2,440 mm, loading space height: 2,000 mm, loading space volume: 51 m³, total length: 11,400 mm, total width: 2,500 mm, total height: 3,650 mm, suspension: air, tire size: 385/65R22,5, color: grey, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, aluminum body, 3-axle, BPW axles, air suspension, 1st axle liftable, ABS (anti-lock braking system), roller tarpaulin, catwalk, grain outlet, supports Credpfxsvhhvqo Adheh Body: Aluminum box body manufacturer Fudickar approx. 51.8m³ low pressure cylinder 190Bar, floor 7mm, side walls 30mm hollow chamber profile with 2.7mm inner wall thickness, front wall straight 4mm, rear wall as combination door (1/3, 2/3) with double bearing and steel frame incl. grain slider 400x400mm, replaceable rubber seal, saddle height 1,180-1,210mm, construction of the trailer like Langendorf! New vehicle from stock with daily registration on 08.06.2022! ACCESSORIES WITHOUT WARRANTY, subject to changes, prior sale and errors excepted! - .

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Manufacturer: Werthenbach, hydraulic cylinder type H21-F-63/86-180AN -Stroke: 180 mm -Piston rod: Ø 36 mm / Thread Ø28 x 25 mm -Cylinder: outer Ø 75 mm Cjdsgvwapopfx Adhorh -Mounting: Bolt circle Ø 118 mm -Pressure: max. 120 bar -Number: 2 cylinders available -Price: per piece -Dimensions: 370/140/H145 mm -Weight: 11 kg/pc.

Condition: like new (used), “Pallmann PS 4-7,5 F – Granulator / Roll Crusher” for Sale Credpfxsglvv Ue Adhsh Find our complete stock on our website. Manufacturer: Pallmann Type: PS 4 – 7,5 F Mach. No.: 2264036 Electrical Motor: 75 kW Included Included frame. Shredder will be overhauled, sandblasted and painted.

Condition: good (used), We are offering a second-choice deep strut from the manufacturer SSI Schäfer for sale. The deep strut is suitable for a frame depth of 850 mm and a crossbar width of max. 50 mm. The scope of supply includes: 1x deep strut, second choice Material color: Sendzimir galvanized Total length: approx. 865 mm For frame depth: approx. 850 mm Clear span: approx. 748 mm Technical data for the deep strut: Shelving system: SSI Schäfer Profile dimensions: C 60 x 40 x 8 mm Crossbar support: approx. 52 mm Material thickness: approx. 2.00 mm Unit weight: approx. 2.15 kg Codpfx Adshzt Epehorh General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope.

Condition: good (used), Power cable, data cable, -Manufacturer: Lapp Kabel, connection cable on cable reel 78 m -Cable reel: Schill IT -Cable: Rubber cable type H07 RN-F 3G1.5 -Cable cross-section: 1.5 mm² 3-pole Cedpfjivumpsx Adherh -Connector plug: see photos -Dimensions: 410/260/H450 mm -Weight: 15 kg

Condition: good (used), Hydraulic pump, oil pump, gear pump -Recording wave: -Dimensions: 180/160/120 mm -Weight: 4.5 kg Csdpfsb A Sizsx Adhorh

Condition: as good as new (ex-display), Remark: This is a II. Wahl product, new product unused. II. Wahl means there may be dust deposits, minimal scratches or dirt or dirt may be present. Technical data for the plug-in tube: Manufacturer: SSI Schaefer Shelf system: R3000 suitable for KTZR 31036 shelf cross beams Included in delivery: 01x plug-in tube, II. choice (new goods) Material color: galvanized Type: KRA 4170 Total length: approx. 170 mm Cedepbvgtspfx Adhjrh Useful height: approx. 95 mm TubeØ: approx. 12 mm Weight / pc.: approx. 0,030 kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: as good as new (ex-display), Remark: This is a II. Wahl product, new product unused. II. Wahl means there may be dust deposits, minimal scratches or dirt or dirt may be present. Technical data for the pipe bracket: Manufacturer: SSI Schaefer Shelf system: R3000 suitable for KTZR 31036 shelf beams Frame depth: 800 mm Included in delivery 01x tube stirrup, II. choice (new goods) Partly with stirrup pad Type: KTB 80 Material color: galvanized Total height: approx. 420 mm Total depth: approx. 754 mm TubeØ: approx. 12 mm Weight / pcs.: approx. 0,250 kg Your contact person in our company: Crsdpfopbvw Hex Adhjh Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: new, Year of construction: 2026, functionality: fully functional, spindle bore: 38 mm, turning diameter: 280 mm, turning diameter over top slide: 165 mm, center height: 140 mm, turning length: 700 mm, total length: 1,280 mm, total width: 700 mm, total height: 1,650 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 70 rpm, bed width: 180 mm, type of input current: three-phase, overall weight: 320 kg, quill mount: MK 5, three-jaw chuck diameter: 160 mm, Equipment: rotational speed infinitely variable, WMP290V-F Lathe & Milling Combination with frequency inverter including 2-axis digital readout SINO including premium base cabinet LATHE Centre distance ----- 700 mm Centre height ----- 140 mm Swing over bed ----- 280 mm Swing over cross slide ----- 165 mm Spindle bore ----- 38 mm Spindle taper ----- MT5 Lathe speed range ----- 70-1800 stepless rpm Tailstock taper ----- MT3 Codpfxepz I Iqo Adhsrh Motor power ----- 1.5 kW Weight ----- 230 KG MILLING UNIT Milling head outreach ----- 185 mm Milling speed range ----- 50-2250 stepless rpm Milling spindle taper ----- MT2 Milling head swiveling ----- +/- 90° Quill stroke ----- 50 mm Motor power ----- 750W Weight ----- 75 KG

Condition: used, clear span: 709 mm, The scope of delivery includes: 01x depth bar, used Manufacturer: Nedcon Material color: sendzimir galvanized Crossbar support: approx. 40 mm f. Stand depth: approx. 800 mm Total length: approx. 802 mm Clear span: approx. 709 mm Profile dimensions: C:60 x 50 x 12 mm Material thickness: approx. 2.00 mm Weight/pc: approx. 1.983 kg Cedpfx Adorgp U Ishorh General information about the item: This item is only offered for collection. Any other desired transportation or shipment of this item is associated with additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: new, Year of construction: 2026, LAB 300 PLUS F 16 TERSA - Universal combination machine with aluminum sliding table and three milling speeds for sawing, milling, planing/thicknessing, and optional mortising torsion-resistant steel cast iron construction machine table made of cast iron, hardened and ground easy-running, anodized aluminum sliding table, 10-year warranty on wear of guide rails large fence system with extendable aluminum telescope fence and folding stops with combination saw fence with 45° quick adjustment max. saw blade diameter 315 mm with optional scoring unit, pivotable from 90°-45° helical steel feed roller for consistent wood feed during thicknessing four milling speeds, manually adjustable standard with right/left rotation of the milling spindle Credpfx Adscnxa Noheh three independent motors for each working unit Scope of delivery: Combination fence/parallel fence Arc milling guard Tersa cutterhead Anodized aluminum sliding table Aluminum fence cheeks Folding stops Eccentric clamping arm Model LAB 300 PLUS F 16 Tersa Item No. 5500314 Technical data ---Technical data circular saw--- Fence length 1600 mm max. saw blade diameter with scoring 315 mm max. cutting height at 90° / 45° 100/79 mm max. ripping width to the left of the saw blade 1660 mm Cutting width on the parallel fence 800 mm Saw arbor speed 3500 rpm Saw blade inclination 90° - 45° ---Technical data planer--- Working width 300 mm Planer table length 1260 mm Cutterhead speed Cutterhead diameter / number of planer knives 72 mm / 3 pcs ---Technical data thicknesser--- Table dimensions 300 x 450 mm min. / max. working height 3 mm / 220 mm max. chip removal 4 mm Feed rate 7 m/min ---Technical data table saw--- Usable spindle length 100 mm max. tool diameter 180 mm, can be recessed max. tenon tool diameter 275 mm max. tool diameter, can be recessed 140 mm Spindle speed 3500/600/800 rpm Spindle diameter 30 mm Motor power 400 V / 50 Hz / S6 - 40% 4 kW (5.5 hp) S6 40% Weight 430 kg Dust extraction port diameter 4 x 120 mm Dust extraction port diameter saw blade guard 60 mm Sliding table with ball bearing system equipped with a proven ball bearing system permanently easy-running thanks to hardened and ground guides not susceptible to dust and dirt due to minimal contact point between the ball and the trapezoidal rail 10-year HolzKraft warranty on wear of the carbide guide rails Dust extraction hose connection The dust extraction ports of the planer (1) and thicknesser (2) point in the same direction. The dust extraction hose can therefore be connected to the machine from the same side for both types of planing. You do not need a hose that goes around the machine. Planing units helical steel feed rollers for a constant and even wood feed massive anti-kickback devices prevent the workpiece from kicking back 3-knife cutterhead ensures an optimal planing result

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 193.006, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, wire diameter (max.): 0.33 mm, controller model: AGIEVISION / AGIE HSS-Steuerung, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel in X-axis: 350 mm Travel in Y-axis: 250 mm Travel in Z-axis: 256 mm Travel in U/V axes: ±70 mm Positioning resolution: 0.0001 mm Positioning accuracy: approx. ±3 µm Machining data Max. taper: 30° at a workpiece height of 100 mm Surface finish: up to approx. Ra 0.2 µm with multiple finishing passes Workpiece data Workpiece size, maximum dimensions: 750 × 550 × 250 mm Workpiece weight, maximum: 450 kg Wire system Wire diameter: 0.10 – 0.33 mm Wire speed: up to approx. 3 m/min Wire tension: CNC-controlled MACHINE DETAILS Control system: AGIEVISION / AGIE HSS Generator: AGIE HSS Mains connection: 3 × 400 V, 50 Hz Connected power: approx. 10.5 kVA Dimensions & Weight Codpozpypzjfx Adhsrh Dimensions (L × W × H): approx. 2,215 × 2,215 × 2,220 mm Machine weight: approx. 3,600 kg EQUIPMENT Fully automatic wire threading

Condition: used, Spänex SP 315 KC 3.1 radial fan for the efficient extraction of swarf, dust and light wood waste in woodworking workshops. The fan is ideally suited for use in extraction systems on individual machines or in small machine fleets, and ensures reliable air flow during continuous operation. Thanks to its robust industrial design, it is engineered for continuous use in workshops and production facilities. Technical data: - Air flow rate: approx. 6,400 m³/h - Motor power: 15 kW Cjdpfxezrypgo Adhjrh - Connection diameter: 320 mm