Used Schmidt F 3.1 Schneeräumschild for sale (33,552)

Condition: used, Year of construction: 1983, functionality: limited functionality, machine/vehicle number: AWF 310 0891, The machine is in operation and can be inspected after prior arrangement. Delivery in November 2026. No delivery service is provided; dismantling and transport are the responsibility of the buyer. A crane with a lifting capacity of 2 x 5 tons is available for loading. Dsdsz I T I Ejpfx Adhscn The sale is made without warranty or guarantee, and only to commercial customers, plus VAT; no liability for defects. Maximum distance between centers: 3000 mm. By incorporating an additional table, the maximum grinding length can be extended to 6000 mm by rotating the workpiece. Distance between centers: 260 mm. All information is provided without guarantee. The sale includes the coolant system.

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output Dcsdpfoyug Hxex Adhsn • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: used, Year of construction: 1998, Overview This Krones - Linapac F-T-1800 automatic bottle packer was manufactured in 1998 and was previously installed in a returnable glass bottling line. The machine is designed for the automatic packing of filled bottles into beverage crates and is typically positioned downstream of the filler and inspection systems. The LINAPAC packer series is widely used in high-capacity beverage production lines due to its robust design and reliable crate handling. The system supports a wide range of bottle formats and crate types commonly used in the beer and beverage industry. The machine was originally operated in a high-performance production environment and is suitable for integration into returnable glass bottling systems with similar capacity ranges. Technical Data Dcedpfx Ajytq Taedhon Manufacturer: Krones Model: Linapac F-T-1800 Machine type: Automatic bottle packer Year of manufacture: 1998 Application: Automatic insertion of filled bottles into beverage crates Bottle Formats: - 0.25 L Individual bottle – Ø 57.5 × 215 mm - 0.33 L Ale bottle – Ø 61 × 236.5 / 238 mm - 0.33 L Ale bottle – Ø 68.5 × 234.5 mm - 0.5 L Ale bottle – Ø 68.5 × 270 mm - 0.5 L Steinie bottle – Ø 70.5 × 174 mm - 0.5 L Bavaria bottle – Ø 70 × 260 mm - 0.5 L NRW bottle – Ø 67 × 260 mm - 0.5 L Individual bottle – Ø 82 × 295 mm - 0.7 L GDB bottle – Ø 79 × 290 mm - 0.75 L GDB bottle – Ø 79 × 290 mm - 1.0 L GDB bottle (light) – Ø 84 × 305 mm - 1.0 L AMG bottle – Ø 83.7 × 298 mm Crate Formats: - 5 × 4 – 400 × 300 × 300 mm - 6 × 4 – 400 × 300 × 270 mm - 5 × 4 – 400 × 300 × 210 mm - 4 × 3 – 355 × 275 × 345 mm - 4 × 3 – 400 × 300 × 330 mm - 5 × 4 – 355 × 275 × 255 mm - 5 × 4 – 400 × 300 × 290 mm Condition: Used Availability: On request

Condition: as good as new (ex-display), Year of construction: 2026, Combination 4-in-1 machine HOLZKRAFT CU 300 Classic F 23 N -- Technical Data -- - Circular Saw - Djdpoci Tvhjfx Adhecn Beam length 2,250 mm Max. saw blade diameter 315 mm Max. cutting height at 90°/45° 103 / 82 mm Max. support width to the left of the saw blade 2,310 mm Cutting width with parallel guide 820 mm Saw blade tilt 90° - 45° - Jointer - Working width 300 mm Jointer table length 1,510 mm Cutterhead diameter / Number of cutter knives 72 mm / 3 pcs. - Thicknesser - Table dimensions 300 x 585 mm Min./max. working height 3 / 230 mm Max. material removal 4 mm Feed rate 7 m / min - Table Router - Usable spindle length 100 mm Max. tenon tool diameter 275 mm Max. tool diameter 210 mm Spindle speed 3,500 / 7,000 / 10,000 rpm Spindle diameter 30 mm - General - Motor power 400 V / 50 Hz, 3 x 5.0 kW (6.6 hp) Dust extraction port diameter 4 x 120 mm Dust extraction port diameter on saw blade guard 60 mm - Promotional Price - Location: In stock, 54634 Bitburg

Condition: new, Year of construction: 2026, LAB 300 PLUS F 16 TERSA - Universal combination machine with aluminum sliding table and three milling speeds for sawing, milling, planing/thicknessing, and optional mortising torsion-resistant steel cast iron construction machine table made of cast iron, hardened and ground easy-running, anodized aluminum sliding table, 10-year warranty on wear of guide rails large fence system with extendable aluminum telescope fence and folding stops with combination saw fence with 45° quick adjustment max. saw blade diameter 315 mm with optional scoring unit, pivotable from 90°-45° helical steel feed roller for consistent wood feed during thicknessing four milling speeds, manually adjustable standard with right/left rotation of the milling spindle three independent motors for each working unit Scope of delivery: Combination fence/parallel fence Arc milling guard Tersa cutterhead Anodized aluminum sliding table Aluminum fence cheeks Folding stops Eccentric clamping arm Model LAB 300 PLUS F 16 Tersa Item No. 5500314 Technical data ---Technical data circular saw--- Fence length 1600 mm max. saw blade diameter with scoring 315 mm max. cutting height at 90° / 45° 100/79 mm max. ripping width to the left of the saw blade 1660 mm Cutting width on the parallel fence 800 mm Saw arbor speed 3500 rpm Dsdecnxa Nopfx Adhjcn Saw blade inclination 90° - 45° ---Technical data planer--- Working width 300 mm Planer table length 1260 mm Cutterhead speed Cutterhead diameter / number of planer knives 72 mm / 3 pcs ---Technical data thicknesser--- Table dimensions 300 x 450 mm min. / max. working height 3 mm / 220 mm max. chip removal 4 mm Feed rate 7 m/min ---Technical data table saw--- Usable spindle length 100 mm max. tool diameter 180 mm, can be recessed max. tenon tool diameter 275 mm max. tool diameter, can be recessed 140 mm Spindle speed 3500/600/800 rpm Spindle diameter 30 mm Motor power 400 V / 50 Hz / S6 - 40% 4 kW (5.5 hp) S6 40% Weight 430 kg Dust extraction port diameter 4 x 120 mm Dust extraction port diameter saw blade guard 60 mm Sliding table with ball bearing system equipped with a proven ball bearing system permanently easy-running thanks to hardened and ground guides not susceptible to dust and dirt due to minimal contact point between the ball and the trapezoidal rail 10-year HolzKraft warranty on wear of the carbide guide rails Dust extraction hose connection The dust extraction ports of the planer (1) and thicknesser (2) point in the same direction. The dust extraction hose can therefore be connected to the machine from the same side for both types of planing. You do not need a hose that goes around the machine. Planing units helical steel feed rollers for a constant and even wood feed massive anti-kickback devices prevent the workpiece from kicking back 3-knife cutterhead ensures an optimal planing result

Condition: used, Year of construction: 2004, turning diameter: 660 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, total height: 2,600 mm, total length: 3,820 mm, total width: 2,060 mm, overall weight: 10,400 kg, Equipment: documentation/manual, CNC Turning Milling centre with Second Spindle CNC Control Mazatrol PC Fusion CNC 640 MT PRO Turning diameter 550/660 mm Turning length 1016 mm Spindle bore diameter 65 mm Spindle speed 35-5000 R/min X-axis movement 580 mm Y-axis movement 160 mm Z-axis movement 1045 mm B-axis travel 225 ° mm C-axis indexing 360° Spindle nose A2-6 Tool Taper Capto C6 Number of tools in magazine 40 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Dedpozv Sfbefx Adhscn

Condition: new, pressure 50.0 t stroke 200 mm table surface area 730 x 205 mm dayligth 75 - 1050 mm column travel between the guideways 730 mm weight of the machine ca. 292 kg Dodpfsxaa Ixjx Adhecn range L-W-H 1040 x 800 x 1880 mm Description : - Standard with cable winch - for easy height adjustment of the support table - Piston delivery either manually or pneumatically - Powerful workshop presses for craft and repair businesses - Optimum price-performance ratio thanks to rational design - The standard foot pedal keeps your hands free for the workpiece - Increased range of application thanks to the optionally . available pressure mandrel set (10 pieces). - Pressure cylinder with integrated return spring for piston return - Welded steel frame for heavy use and high stability - Versatile in use thanks to the pressure cylinder that can . be moved to the left and right

Condition: good (used), Year of construction: 2013, weight max. 1200 kg table turning speeds 80 - 1600 mm/min. roll diameter 200 x 50 mm workpiece diameter 20 - 800 mm range L-W-H 520 x 470 x 390 mm Antrieb range L-W-H dito mm Mitläufer voltage 230 V / 50 Hz weight 56.0 kg current new price approx. 3,000 euros special price on request Product description: Dcjdpsy Erxiofx Adhen - For processing cylindrical workpieces - Flat frame - Swivel castors with polyurethane coating - Clearly arranged operating elements - Infinitely variable speed - The control electronics are protected by a robust and . enclosed housing - With foot switch for start/stop - Drive with DC electric motors and gearbox

Condition: new, Technical specifications: Material Thickness: 2mm Internal dimensions LxWxH: 120 x 61 x 58 cm Dsdpfx Adet U Sckehscn Useful volume: 420 liters External dimensions LxWxH: 122 x 61.5 x 70 cm Height (unfolded): 123 cm Drill Pattern Spacing - Large Hole (25mm): 40" x 18". Drill Pattern Spacing - Small Hole (12mm): 8.4 x 8.4 cm Stacking fork mounts: W12 x H8.5 cm Weight: 60kg

Condition: good (used), Year of construction: 2011, cutting diameter 290 mm capacity 90 degrees: flat 320 x 290 mm capacity 45 degrees: flat re 240 x 150 mm capacity 45 degrees: round re 240 mm capacity 60 degrees: flat re 150 x 180 mm capacity 60 degrees: round re 150 mm capacity 45 degrees: flat li 240 x 100 mm capacity 45 degrees: round li 240 mm turning speed range: 20 - 100 m/min saw band length 3100 x 27 x 0.9 mm power capacity 2.4 kW weight of the machine ca. 570 kg range L-W-H 1800 x 950 x 1550 mm Current list price: approx. 12.000 euros Special price upon request Features: - Semi-automatic electro-hydraulic band saw (INDUSTRIE) Dcedpszv Ulwsfx Adhon - Suitable for single-piece and small-batch production - Large, ball-bearing-mounted cast-iron rotary table * For miter cuts from 45° left to 60° right - Hydraulic cutting feed Material clamping - Continuously variable band speed (Model "F") - Ergonomic control panel - Micro-spray lubrication system (spray oiler) - 2x PEGAS roller conveyor - Operating instructions in German * Semi-automatic work cycle: After the cycle starts, the vise closes automatically; the saw frame lowers for the cut and automatically raises back to the predefined starting position once the cut is complete. Afterward, the vise opens.

Condition: good (used), Year of construction: 1995, CNC Wire EDM Machine AGIE AGIECUT 270 SF+F HSS Year of manufacture: 1995 Dcedpfxjzzyhno Adhsn Travel in X-axis: 350 mm Travel in Y-axis: 250 mm Travel in Z-axis: 256 mm Travel in U/V axes: ±70 mm Positioning resolution: 0.0001 mm Positioning accuracy: approx. ±3 µm Machining data Max. taper: 30° at a workpiece height of 100 mm Surface finish: up to approx. Ra 0.2 µm with multiple finishing passes Workpiece data Workpiece size, max. dimensions: 750 × 550 × 250 mm Workpiece weight, max.: 450 kg Wire system Wire diameter: 0.10 – 0.33 mm Wire speed: up to approx. 3 m/min Wire tension: CNC-controlled MACHINE DETAILS Control system: AGIEVISION / AGIE HSS Generator: AGIE HSS Mains connection: 3 × 400 V, 50 Hz Connected power: approx. 10.5 kVA Dimensions & Weight Dimensions (L × W × H): approx. 2,215 × 2,215 × 2,220 mm Machine weight: approx. 3,600 kg EQUIPMENT Fully automatic wire threading

Condition: used, axle configuration: > 3 axles, first registration: 01/2019, loading space length: 9,200 mm, loading space width: 2,540 mm, loading space height: 900 mm, total length: 13,800 mm, total width: 2,540 mm, suspension: air, tire size: 245/70R17.5, wheelbase: 10,160 mm, color: red, Year of construction: 2019, Equipment: ABS, 1 x lift axle 3 x steering axle Radio-remote steering Hydraulic ramp Camera = Further information = Axle configuration Tire size: 245/70R17.5 Dedpfjzcuxrox Adhecn Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Dual tires; Tire tread depth left inner: 50%; Tire tread depth left outer: 50%; Tire tread depth right inner: 50%; Tire tread depth right outer: 50% Rear axle 2: Dual tires; Steered; Tire tread depth left inner: 30%; Tire tread depth left outer: 30%; Tire tread depth right inner: 30%; Tire tread depth right outer: 30% Rear axle 3: Dual tires; Steered; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 40%; Tire tread depth right outer: 40% Rear axle 4: Dual tires; Steered; Tire tread depth left inner: 60%; Tire tread depth left outer: 60%; Tire tread depth right inner: 60%; Tire tread depth right outer: 60% Weights Unladen weight: 11,344 kg Payload: 54,656 kg GVWR: 66,000 kg Maintenance APK (Technical Main Inspection): valid until 02/2027 Financial information Price: On request Identification Model number: N/A F-S44 / STEERING AXLE - LIFT = Company information = ALL PRICES ARE NET FOR EXPORT (Joris Versteijnen NL-DE-GB) (Wouter Greutink NL-DE-GB-ES-IT) (Govorim po ryccki) We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: used, axle configuration: > 3 axles, first registration: 01/2019, loading space length: 9,200 mm, loading space width: 2,540 mm, loading space height: 900 mm, total length: 13,800 mm, total width: 2,540 mm, suspension: air, tire size: 245/70R17.5, wheelbase: 10,160 mm, color: red, Year of construction: 2019, Equipment: ABS, 1 x lift axle 3 x steering axles Radio remote steering Hydraulic ramp Camera = Further information = Axle configuration Tire size: 245/70R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Dual tires; Tire tread depth, left inner: 50%; Tire tread depth, left outer: 50%; Tire tread depth, right inner: 50%; Tire tread depth, right outer: 50% Rear axle 2: Dual tires; Steered; Tire tread depth, left inner: 30%; Tire tread depth, left outer: 30%; Tire tread depth, right inner: 30%; Tire tread depth, right outer: 30% Rear axle 3: Dual tires; Steered; Tire tread depth, left inner: 40%; Tire tread depth, left outer: 40%; Tire tread depth, right inner: 40%; Tire tread depth, right outer: 40% Rear axle 4: Dual tires; Steered; Tire tread depth, left inner: 60%; Tire tread depth, left outer: 60%; Tire tread depth, right inner: 60%; Tire tread depth, right outer: 60% Weights Unladen weight: 11,344 kg Payload: 54,656 kg GVW: 66,000 kg Maintenance APK (Technical Inspection): valid until 02/2027 Financial information Price: On request Identification Model number: max trailer N/A F-S44 / STEERING = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen NL-DE-GB) Wouter Greutink NL-DE-GB-ES-IT) Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the information provided. Djdezp Dryspfx Adhscn

Condition: excellent (used), first registration: 03/2017, loading space length: 94,100 mm, loading space width: 2,550 mm, color: green, Year of construction: 2017, Unladen weight: 4,100 kg Payload: 14,900 kg Gross vehicle weight (GVW): 19,000 kg Loading platform height: 90 cm Technical condition: very good Visual condition: very good ACKERMANN 1-AXLE SEMI SPECIAL FOR CRANE TRUCK 1 AXLE, AIR SUSPENSION BPW AXLE Dodpfxjyffpmo Adhjcn CHASSIS FULLY HOT-DIP GALVANIZED ALUMINUM SIDE WALLS LOWBED HEIGHT 90 CM NECK LENGTH: 370 CM LOADING PLATFORM LENGTH: 590 CM TOTAL SEMI LENGTH: 940 CM TRAILER IS IN EXCELLENT CONDITION

Condition: ready for operation (used), Siemens SITRANS F C MASS 6000 FDK:083H0204 SN 134335N324, used, in good condition, 100% functional, delivery as per photos Dcodpfxez Act No Adhjn

Condition: new, Stromab Matrix F Automatic Fully Programmable Cross Cutting & Notching Machine A heavy duty optimising upstroke crosscut and notching machine, designed for programmable and repetitive cutting and notching from standard and / or random lengths of timber. The saw unit has a pneumatic upstroke action with variable speed control, The notching unit is independent of the saw and therefore allows for programming of the saw or notching either as separate program's or as one single job. The pusher / feed is fitted with a heavy duty rack and pinion drive feeding system for fast positioning giving a high level of repeat cutting accuracy. The saw unit and clamping area is totally enclosed by a clear hinged electrically interlocked hood that while giving the operator a clear view of the cutting area still gives complete protection. The infeed and outfeed tables are of all steel construction meaning even heavy sections or packs of timber can be processed. For additional operator safety the rear of the pusher system is guarded, while there is a full length safety pull cord on the front infeed table. Programming and entering of cutting lists is very simple through a colour touch screen controller with graphic representation of the cut pieces. The machine offers full optimisation and also has the added optional facilities of defect cutting and remote programming from PC or laptop with transfer vis USB key or network. Additional options also include - extended outfeed table and label printing. To date we have supplied over 250 Matrix saws in to the UK, with a number of customers installing several machines. Saw unit Self braking saw motor 10hp Saw blade diameter 500mm Max cutting width 360mm ( refer to chart ) Max cutting height 135mm ( refer to chart ) Dust extraction 4 x 100mm diameter Milling Unit Self braking milling motor 5.5hp Pneumatic milling stroke with adjustable speed Max milling stroke 400mm Dcodpfx Aedy Hrdodhsn Max milling width 100mm Max milling depth 60mm Dust extraction 2 x 125mm and 2 x 100mm Push feed system 3000 to 13000mm Precision rack and pinion drive to pusher with magnetic reading tape giving a high level of repeat cutting accuracy. Pneumatic rising of the pusher at the end of cutting cycle Piece length reading photocell Positioning speed 100m/min Positioning accuracy + /- 0.4mm Touch screen control unit Remote programming of cutting list via colour graphic touch screen controller - connection via USB key. - 6 optimising criteria - longest size, minimum waste, sequence, priority size, by volume or by value. - 1000 cutting lists - 10,000 lines per list. - Cutting list entered via controller key pad or via remote PC using PC or cable - Graphic description of the workpiece.

Condition: used, Year of construction: 2006, bar feeder, second-hand manufacturer: IEMCA model: PRA 52/42/F year of construction: 2006 bundle-loading type magazine Please, contact us for getting more information and pictures on mail(at) or Dcodpfoz A D D Tox Adhon subject to sale and mistakes *

Condition: excellent (used), mileage: 522,907 km, power: 268 kW (364.38 HP), first registration: 11/2000, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: blue, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: air, number of seats: 3, Year of construction: 2000, Equipment: ABS, crane, = Additional options and accessories = - 3 chairs - Beacon(s) - Lift Axle - PTO - Radio/CD player - Steering Axle - Toolbox = Remarks = Crane Number of hydraulic extensions: 3 Number of support legs: 2 Remote control: ✓ Load Hook: ✓ Meter capacity: 10,60 m Capacity kilo: 6560 kg = More information = Number of doors: 2 Cab: single Front axle: Steering Rear axle 1: Double wheels; Suspension: air suspension Rear axle 2: Lift axle; Steering; Suspension: air suspension GVW: 28.000 kg Crane: PALFINGER, year of manufacture 2000, behind the cab Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam Dcedpfxsznd Dgj Adhjn IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: new, functionality: fully functional, machine/vehicle number: NM0KKTP64BTS92457, mileage: 210 km, power: 390 kW (530.25 HP), fuel type: electric, overall weight: 8,112 kg, tire size: 315/70 R22.5, tire condition: 100 %, axle configuration: 4x2, wheelbase: 4,750 mm, fuel: electricity, color: white, driver cabin: day cab, gearing type: automatic, number of seats: 2, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 12,600 kg, battery energy capacity: 290 kWh, all-electric range: 250 km, Year of construction: 2026, operating hours: 10 h, Interested? Feel free to contact your nearest Ford Trucks dealer. - ACB Motors BV - Truck Center Limburg - AD Services Srl - CTSL BV - Eeckhout Cardoen BV - Garage De La Vierre Srl - Garage O.C.M. Srl - GTTS Jourdan SA Dedpfoz D Ez Aex Adhscn - Herman Noyens Trucks NV - Marc Vansteenland BV Immediately available.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 36,000 h, total height: 1,900 mm, overall weight: 2,700 kg, This KASTO KASTOflex F Circular Metal Saw was manufactured in 2009. It features a weight of 2700 kg, operates on 400 V, and includes an automatic feed, residue bunker, and coolant device. It supports mitre cuts and has a loading station with a 20-compartment chain magazine. The discharge side boasts a 5 m long apron conveyor with programmable discharge stations. Consider the opportunity to buy this KASTO KASTOflex F Circular Metal Saw. Contact us for more information. Additional equipment • Voltage: 400 V • With automatic feed • Residue bunker • Coolant device • Mitre cut • Loading station, chain magazine with 20 compartments on the infeed side • Discharge sorting station, discharge side with 5 m long apron conveyor and programmable discharge stations on both sides • Minimum quantity lubrication • including 2x shelfs from Kasto Extra Information Dedpfoz Dth Rox Adhscn Shelves included Cutting ranges: 04/08 with saw blade 450 mm diameter Round Flat (W x H) Square (W x H) Cutting range 90° @ 150 200 × 100 140 x 140 mm Cutting range 45° x 80 × mm Cutting range 60° × 60 100 × 100 mm Minimum material height for flat material 8 mm Remnant length in automatic cycle at 90° 35 mm Remnant length in automatic cycle at 45° 95 mm Material support height 1,050 mm Features: Total connected load 8 kW Connected load coolant pump 0.1 kW Frequency-controlled drive (optional) 4 kW Cutting speed continuously variable 10 - 60 m/min Direct dimension input up to 9,999 mm Max. permissible material curvature 12 mm/6 m Feed length in one stroke at 90° 2,030 mm Feed length in one stroke at 45° approx. 1,970 mm Saw feed speed 16 - 520 mm/min Saw blade rapid return 2,000 mm/min Material feed speed 0 - 20 m/min Max. clamping force of material feed vise 12,500 N Max. clamping force of vertical vise 25,000 N Clamping force Reducible (option) Saw blade diameter, special flange Mounting hole according to DIN 8576 350 mm 40/4 x 11/63 mm Saw blade diameter Mounting hole according to DIN 8576 with intermediate ring 400, 450 mm 50/4 x 14/80 mmMachine also available without the shelving system. Dimensions Machine Depth 4800 mm

Condition: used, Year of construction: 2015, axis stroke (X,Y,Z) 6175x1550x300 mm Number of spindle head vertical 20 St. Number of spindles head horizontal 10 St. Number of milling agregates 1 St. Speed 24.000 U/min. Capacity 300 kg/h Sawing unit ja_yes 0 Control Homag PC85 CNC powerTouch HOMAG BMG 511 /60/12/F/K Profi ----- Machine already professionally dismantled and stored at our warehouse in Oberkochen: - 5-axis CNC processing center - Moving gantry machine (dual-drive gantry system) - 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm - 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° "MPU" MultiProcessingUnit with C-axis +/- 185° - 1 Chain tool changer, 30-position - Includes SL laser projector - Includes vacuum suction cups (as available) - Spare parts and accessories as shown in photos - Last HOMAG 5-axis service: 2024 - Last HOMAG service: 2025 - Price includes professional dismantling and loading onto customer's truck - Costs for loading frames/transport securing devices NOT included; see note at the end of the description Technical Data ----- Max. workpiece lengths: All aggregates: Single 6,000 mm; Pendulum min. 1,550 mm, max. 3,200 mm Tool dia. 25 mm: Single 6,175 mm; Pendulum min. 1,550 mm, max. 3,200 mm Max. workpiece width: All aggregates, front stop 1,100 mm Milling operation tool dia. 25 mm: Front stop 1,325 mm, rear stop 1,550 mm Workpiece thickness: Max. 300 mm including clamping devices Routing spindle and drilling head ----- 2 independent Z-axes 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm Liquid-cooled routing spindle, DRIVE5C+ aggregate interface with 3-point torque support 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° "MPU" MultiProcessingUnit with C-axis +/- 185° for drilling and sawing operations at any angle 1 motor 2.3 kW, frequency-controlled, max. speed 7,500 rpm selectable via program for rapid processing even with small diameters 20 vertical HIGH-SPEED spindles 10 horizontal spindles 1 grooving and parting saw Includes Z-axis module Includes extraction hood Tool changer: ----- 1 Pick-up station for 350 mm saw blade for DRIVE5(C)+ 1 Chain tool changer, 30-position, D=80 For tools and aggregates with HSK-F63 Chain changer with 30 tool/aggregate positions for use with machines featuring 1 main spindle 1 upstream double gripper for rapid tool changing Console table with ----- 12 consoles, Y=1,500 mm for K-table 6 lifting rails (HPL), lift 100 mm Additional accessories: Dcjdpfszqggvox Adhon ----- SPEED PACK: Increase in... Max. traverse speed of X-axis: 80 m/min; vector speed = 110 m/min Contour laser positioning aid 1 vacuum pump (300 m³/h) Chip conveyor belt with extension Vacuum clamping system SL-Laser Energy-efficient 5-axis extraction hood Safety equipment: ----- Laser, bumper SAFESCAN for Speed ??Pack CE mark HOMAG Speed ??Pack HOMAG Quality Package Enclosed energy chain Control system ----- PowerControl PC85 HOMAG powerTouch Handheld terminal HOMAG IPC Powerpack Software ----- HOMAG woodWOP 7.1 WoodScout diagnostic system MMR B...

Condition: used, Fiber laser, fiber laser cutting system with flat bed and tube laser Laser cutting machine, laser cutting system, laser machine Manufacturer: DURMA Type: HD-F III 3015 III BH-IPG 2kW Serial No.: 822817712 Year of manufacture: 2017 with IPG laser source SIEMENS SL 840D + CAD software + nesting software Working area: 3000 x 1500 mm Tube cutting device: up to Ø 400 mm Laser power: 2000 watts (fiber laser) Output power: 0.2..2 kW Wavelength: 1070..1080 nm IPG power consumption: 6.4 kW/hour - Polarization random - Collimating focal length FC 100 mm - Focusing focal length FF 150 mm - Fiber diameter in single mode 50, 100, 200, 300 µm - Max. power consumption 42 kW - Power consumption machine 20 kW - Power consumption filter 4 kW - Power consumption cooler 10+1 kW Djdpjkdnv Tjfx Adhjcn - Power consumption resonator 7 kW Mild steel sheet thickness max. 12 mm - Stainless steel sheet thickness max. 6 mm - Aluminum sheet thickness max. 6 mm - Copper sheet thickness max. 3 mm - Brass sheet thickness max. 6 mm Working area X-axis 3060 mm Working area Y-axis 1530 mm Working area Z-axis 160 mm Sheet size max. 3048 x 1524 mm Sheet weight max. 200 kg/m² - IPG fiber laser resonator (see separate document) - Water cooling unit for laser source and cutting head (see separate document) - Under-table extraction and extraction filter system (see separate document) - with 2-position shuttle table - Tube laser with 4-jaw chuck and large spindle bore next to the flat bed - Guides for tube laser on linear guides - with CAD software - with nesting software - with tube laser software very good condition

Condition: used, Technical details: diameter: 400 mm width: 160 mm Dcodpeu Nlh Refx Adhsn weight of the machine approx.: 159 kg revolution per minute: 3000 U/min Merkmale: automatisches spannen Kraftspannfutter Flanschaufnahme Ø 298 x 32mm Fmax: 110 kN Fges. 250 kN 6 Formbacken *

Condition: good (used), Year of construction: 1991, machine/vehicle number: 139607, Offer 26215 Technical Data: - Drilling capacity 28 mm - Drill spindle mounting MK 3 - Tapping thread M 12 - Drill spindle speeds: - Level 1: 120 / 215 / 360 / 600 / 1080 rpm Dsdpfoz Dtxcex Adhscn - Level 2: 240 / 430 / 720 / 1200 / 2150 rpm - Drilling unit with height adjustment via hand crank - Smallest / largest distance between table and drilling/milling spindle: 60 / 390 mm - Drill spindle stroke 100 mm - Fine feed adjustment of the spindle via handwheel - Drill spindle overhang 260 mm - Coordinate table with 3 T-slots: 600 x 240 mm - Table travel: - X-axis: 350 mm - Y-axis: 160 mm - Drive: 400 V / 0.7 / 1.3 kW - Footprint: approx. W 800 x H 1800 x D 900 mm - Weight: approx. 300 kg

Condition: used, Electric chain hoist, electric lifting mechanism, DEMAG crane, type PK 5N-F Manufacturer’s serial number: 5300331, Year of manufacture: 1990 Load capacity: 500 kg Hook travel: 3 meters Distance from suspension point to load hook: 550 mm Main lifting speed: 10 m/min Fine lifting speed: 2.5 m/min Cable length for control pendant: approx. 1.8 meters Power connection: 400 Volt, 50 Hz - 1 load chain = 500 kg - Emergency stop Weight: 52 kg Dodpjz Ek Rrofx Adhecn Good condition