Used Schmidt F 3.1 Schneeräumschild for sale (33,566)

Condition: used, Internal grinder cnc REWITECH 220 CNC F C CH Dsdpfez I Uv Rex Adhocn

Year of construction: 2025, condition: used, HSK63-B,F Test Mandrel Suitable for Vollmer machine types: QWD 750 / QWD 760 / QWD 750 H / QWD 760 H / VPulse 500 and all models from the QXD series (200/250/400) Dodpfx Adewl Alaehecn

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) Dcjdpfx Adjyug Hxjhjn "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection Dedpfoyug R Rsx Adhjcn • interface for Grundfos CIM fieldbus module

Condition: used, Year of construction: 1998, Overview This Krones - Linapac F-T-1800 automatic bottle packer was manufactured in 1998 and was previously installed in a returnable glass bottling line. The machine is designed for the automatic packing of filled bottles into beverage crates and is typically positioned downstream of the filler and inspection systems. The LINAPAC packer series is widely used in high-capacity beverage production lines due to its robust design and reliable crate handling. The system supports a wide range of bottle formats and crate types commonly used in the beer and beverage industry. The machine was originally operated in a high-performance production environment and is suitable for integration into returnable glass bottling systems with similar capacity ranges. Technical Data Manufacturer: Krones Model: Linapac F-T-1800 Machine type: Automatic bottle packer Year of manufacture: 1998 Application: Automatic insertion of filled bottles into beverage crates Bottle Formats: - 0.25 L Individual bottle – Ø 57.5 × 215 mm - 0.33 L Ale bottle – Ø 61 × 236.5 / 238 mm - 0.33 L Ale bottle – Ø 68.5 × 234.5 mm - 0.5 L Ale bottle – Ø 68.5 × 270 mm - 0.5 L Steinie bottle – Ø 70.5 × 174 mm - 0.5 L Bavaria bottle – Ø 70 × 260 mm Dcodpfjytq Taox Adhjn - 0.5 L NRW bottle – Ø 67 × 260 mm - 0.5 L Individual bottle – Ø 82 × 295 mm - 0.7 L GDB bottle – Ø 79 × 290 mm - 0.75 L GDB bottle – Ø 79 × 290 mm - 1.0 L GDB bottle (light) – Ø 84 × 305 mm - 1.0 L AMG bottle – Ø 83.7 × 298 mm Crate Formats: - 5 × 4 – 400 × 300 × 300 mm - 6 × 4 – 400 × 300 × 270 mm - 5 × 4 – 400 × 300 × 210 mm - 4 × 3 – 355 × 275 × 345 mm - 4 × 3 – 400 × 300 × 330 mm - 5 × 4 – 355 × 275 × 255 mm - 5 × 4 – 400 × 300 × 290 mm Condition: Used Availability: On request

Condition: as good as new (ex-display), Year of construction: 2026, Combination 4-in-1 machine HOLZKRAFT CU 300 Classic F 23 N -- Technical Data -- - Circular Saw - Beam length 2,250 mm Max. saw blade diameter 315 mm Max. cutting height at 90°/45° 103 / 82 mm Max. support width to the left of the saw blade 2,310 mm Cutting width with parallel guide 820 mm Saw blade tilt 90° - 45° - Jointer - Working width 300 mm Jointer table length 1,510 mm Cutterhead diameter / Number of cutter knives 72 mm / 3 pcs. - Thicknesser - Table dimensions 300 x 585 mm Min./max. working height 3 / 230 mm Dcsdeci Tvhspfx Adhen Max. material removal 4 mm Feed rate 7 m / min - Table Router - Usable spindle length 100 mm Max. tenon tool diameter 275 mm Max. tool diameter 210 mm Spindle speed 3,500 / 7,000 / 10,000 rpm Spindle diameter 30 mm - General - Motor power 400 V / 50 Hz, 3 x 5.0 kW (6.6 hp) Dust extraction port diameter 4 x 120 mm Dust extraction port diameter on saw blade guard 60 mm - Promotional Price - Location: In stock, 54634 Bitburg

Condition: used, clear span: 709 mm, The scope of delivery includes: 01x depth bar, used Manufacturer: Nedcon Material color: sendzimir galvanized Crossbar support: approx. 40 mm f. Stand depth: approx. 800 mm Total length: approx. 802 mm Clear span: approx. 709 mm Profile dimensions: C:60 x 50 x 12 mm Material thickness: approx. 2.00 mm Weight/pc: approx. 1.983 kg General information about the item: This item is only offered for collection. Any other desired transportation or shipment of this item is associated with additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery. Dedpfx Adorgp U Ijhjcn

Condition: good (used), We are offering a second-choice deep strut from the manufacturer SSI Schäfer for sale. The deep strut is suitable for a frame depth of 850 mm and a crossbar width of max. 50 mm. The scope of supply includes: 1x deep strut, second choice Material color: Sendzimir galvanized Total length: approx. 865 mm For frame depth: approx. 850 mm Clear span: approx. 748 mm Technical data for the deep strut: Shelving system: SSI Schäfer Profile dimensions: C 60 x 40 x 8 mm Crossbar support: approx. 52 mm Material thickness: approx. 2.00 mm Unit weight: approx. 2.15 kg General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope. Djdpfxshzt Eps Adhscn

Condition: as good as new (ex-display), Remark: This is a II. Wahl product, new product unused. II. Wahl means there may be dust deposits, minimal scratches or dirt or dirt may be present. Technical data for the plug-in tube: Manufacturer: SSI Schaefer Shelf system: R3000 suitable for KTZR 31036 shelf cross beams Included in delivery: 01x plug-in tube, II. choice (new goods) Material color: galvanized Type: KRA 4170 Total length: approx. 170 mm Useful height: approx. 95 mm TubeØ: approx. 12 mm Weight / pc.: approx. 0,030 kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Dsdpfx Adepbvgtehjcn Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: as good as new (ex-display), Remark: This is a II. Wahl product, new product unused. II. Wahl means there may be dust deposits, minimal scratches or dirt or dirt may be present. Technical data for the pipe bracket: Manufacturer: SSI Schaefer Shelf system: R3000 suitable for KTZR 31036 shelf beams Frame depth: 800 mm Dcjdpfx Aopbvw Hsdhon Included in delivery 01x tube stirrup, II. choice (new goods) Partly with stirrup pad Type: KTB 80 Material color: galvanized Total height: approx. 420 mm Total depth: approx. 754 mm TubeØ: approx. 12 mm Weight / pcs.: approx. 0,250 kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: new, Year of construction: 2026, LAB 300 PLUS F 16 TERSA - Universal combination machine with aluminum sliding table and three milling speeds for sawing, milling, planing/thicknessing, and optional mortising torsion-resistant steel cast iron construction machine table made of cast iron, hardened and ground easy-running, anodized aluminum sliding table, 10-year warranty on wear of guide rails large fence system with extendable aluminum telescope fence and folding stops with combination saw fence with 45° quick adjustment max. saw blade diameter 315 mm with optional scoring unit, pivotable from 90°-45° helical steel feed roller for consistent wood feed during thicknessing four milling speeds, manually adjustable standard with right/left rotation of the milling spindle three independent motors for each working unit Scope of delivery: Combination fence/parallel fence Arc milling guard Tersa cutterhead Dcjdpfx Aocnxa Nsdhjn Anodized aluminum sliding table Aluminum fence cheeks Folding stops Eccentric clamping arm Model LAB 300 PLUS F 16 Tersa Item No. 5500314 Technical data ---Technical data circular saw--- Fence length 1600 mm max. saw blade diameter with scoring 315 mm max. cutting height at 90° / 45° 100/79 mm max. ripping width to the left of the saw blade 1660 mm Cutting width on the parallel fence 800 mm Saw arbor speed 3500 rpm Saw blade inclination 90° - 45° ---Technical data planer--- Working width 300 mm Planer table length 1260 mm Cutterhead speed Cutterhead diameter / number of planer knives 72 mm / 3 pcs ---Technical data thicknesser--- Table dimensions 300 x 450 mm min. / max. working height 3 mm / 220 mm max. chip removal 4 mm Feed rate 7 m/min ---Technical data table saw--- Usable spindle length 100 mm max. tool diameter 180 mm, can be recessed max. tenon tool diameter 275 mm max. tool diameter, can be recessed 140 mm Spindle speed 3500/600/800 rpm Spindle diameter 30 mm Motor power 400 V / 50 Hz / S6 - 40% 4 kW (5.5 hp) S6 40% Weight 430 kg Dust extraction port diameter 4 x 120 mm Dust extraction port diameter saw blade guard 60 mm Sliding table with ball bearing system equipped with a proven ball bearing system permanently easy-running thanks to hardened and ground guides not susceptible to dust and dirt due to minimal contact point between the ball and the trapezoidal rail 10-year HolzKraft warranty on wear of the carbide guide rails Dust extraction hose connection The dust extraction ports of the planer (1) and thicknesser (2) point in the same direction. The dust extraction hose can therefore be connected to the machine from the same side for both types of planing. You do not need a hose that goes around the machine. Planing units helical steel feed rollers for a constant and even wood feed massive anti-kickback devices prevent the workpiece from kicking back 3-knife cutterhead ensures an optimal planing result

Condition: used, VISCOTECH SEM12-F / 10030939 TFT 12" monitor The parts were removed from Dsdpfezu A Udsx Adhocn production facilities that were in operation until they were decommissioned. Condition: used (functional)

Condition: used, Year of construction: 2020, _____For sale on behalf of a customer: Pöttinger Impress 125 F PRO, first used in 2021. Bale counter: 5,000 bales. 32 knives. Central lubrication system. Air pressure system. Isobus without terminal. Very well maintained. For sale due to a change to a combination press/wrapper. The press is immediately available. Price: EUR 34,900.00 net (+19% VAT). Location: null. Dcjdpfxozx Ityj Adhon

Condition: used, Year of construction: 2004, turning diameter: 660 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, total height: 2,600 mm, total length: 3,820 mm, total width: 2,060 mm, overall weight: 10,400 kg, Equipment: documentation/manual, CNC Turning Milling centre with Second Spindle CNC Control Mazatrol PC Fusion CNC 640 MT PRO Turning diameter 550/660 mm Turning length 1016 mm Spindle bore diameter 65 mm Spindle speed 35-5000 R/min Djdpszv Sfbsfx Adhecn X-axis movement 580 mm Y-axis movement 160 mm Z-axis movement 1045 mm B-axis travel 225 ° mm C-axis indexing 360° Spindle nose A2-6 Tool Taper Capto C6 Number of tools in magazine 40 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: new, pressure 50.0 t stroke 200 mm table surface area 730 x 205 mm dayligth 75 - 1050 mm column travel between the guideways 730 mm weight of the machine ca. 292 kg range L-W-H 1040 x 800 x 1880 mm Description : - Standard with cable winch - for easy height adjustment of the support table Dsdpfoxaa Ixsx Adhscn - Piston delivery either manually or pneumatically - Powerful workshop presses for craft and repair businesses - Optimum price-performance ratio thanks to rational design - The standard foot pedal keeps your hands free for the workpiece - Increased range of application thanks to the optionally . available pressure mandrel set (10 pieces). - Pressure cylinder with integrated return spring for piston return - Welded steel frame for heavy use and high stability - Versatile in use thanks to the pressure cylinder that can . be moved to the left and right

Condition: good (used), Year of construction: 2013, weight max. 1200 kg table turning speeds 80 - 1600 mm/min. roll diameter 200 x 50 mm workpiece diameter 20 - 800 mm range L-W-H 520 x 470 x 390 mm Antrieb range L-W-H dito mm Mitläufer voltage 230 V / 50 Hz weight 56.0 kg current new price approx. 3,000 euros special price on request Product description: - For processing cylindrical workpieces - Flat frame - Swivel castors with polyurethane coating Dcjdpfx Aey Erxijdhon - Clearly arranged operating elements - Infinitely variable speed - The control electronics are protected by a robust and . enclosed housing - With foot switch for start/stop - Drive with DC electric motors and gearbox

Condition: new, Technical specifications: Material Thickness: 2mm Internal dimensions LxWxH: 120 x 61 x 58 cm Useful volume: 420 liters External dimensions LxWxH: 122 x 61.5 x 70 cm Dcedpfjt U Sckox Adhon Height (unfolded): 123 cm Drill Pattern Spacing - Large Hole (25mm): 40" x 18". Drill Pattern Spacing - Small Hole (12mm): 8.4 x 8.4 cm Stacking fork mounts: W12 x H8.5 cm Weight: 60kg

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Hydraulically Lowerable Equipment: - 8 lashing points - V-shaped drawbar - Manual hand pump Net price: €2,000.00 / Gross price: €2,380.00 Article number: F0A175251310.01 Technical data: • Brand: Vezeko • Model: Husky F 08.25/10 • Vehicle type: Lowering trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 3 years from first registration • Internal dimensions (LxWxH): 246 x 127 x 10 cm • External dimensions (LxWxH): 408 x 192 x 70 cm • Loading height of the floor: 47 cm • Permissible total weight: 750 kg • Unladen weight: 300 kg • Payload: 450 kg • Chassis: Low-loader (wheels next to the body) • Tires: 165/70R13 • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • 15mm multiplex floor, made of birch wood, with anti-slip coating - extremely robust • Side walls made of anodized, double-walled aluminum profile 10cm • Attachment options at all corners for, e.g., a tarpaulin frame • Very stable steel frame welded • Frame completely hot-dip galvanized • Many stable cross members, resulting in a high point load capacity • Loading area can be hydraulically lowered, license plate holder at the rear, can be folded away for loading • Mechanical safety locking of the pivoting axle during operation • With an overhanging tip at the rear • Additional longitudinal struts fully welded • Tool box at the front • 8 lashing points inside the V-shaped loading rail, rubber-coated, tensile force (750 DaN/kg) • Coupling head ALKO • Very stable V-shaped drawbar, REINFORCED • 13-pin plug • Reversing light • Large-sized safety lighting • Integrated rear fog light Dedpfozy Dm Ssx Adhjcn • Rear position lights in LED • Lighting recessed in the rear frame • Support wheel mounted _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or transit license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, Year of construction: 2025, Fully automatic High-speed Sideshrink Machine. Continuous motion sealing machine with moving sealing unit for reliable and trouble free packaging. PRO-Version including external finger chain infeed conveyor system and friction feeder. Touchscreen panel for user friendly operation. No-product-automatic-stop-system. Easy and fast changeover of formats. Less film wastage reduces film costs. Ideal in combination with the AMTEC SHRINKtunnel POF-L (High-Speed) PRO-Version. Can be combined with POF-PE-Shrink Tunnel. - Specifications: max. speed of the machine in neutral: 120 cycles/minute; max. packaging size: L(80-1000)xW(80-400)xH(5-180) mm; sealing blade length: 500mm; 220V, 6.5kW, 6bar, 0.6m³; machine dimensions: L5405xW1780xH1380 mm. Dcodpfxsv Nl Hpj Adhsn Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: good (used), Year of construction: 2011, cutting diameter 290 mm capacity 90 degrees: flat 320 x 290 mm capacity 45 degrees: flat re 240 x 150 mm capacity 45 degrees: round re 240 mm capacity 60 degrees: flat re 150 x 180 mm capacity 60 degrees: round re 150 mm capacity 45 degrees: flat li 240 x 100 mm capacity 45 degrees: round li 240 mm turning speed range: 20 - 100 m/min saw band length 3100 x 27 x 0.9 mm power capacity 2.4 kW weight of the machine ca. 570 kg range L-W-H 1800 x 950 x 1550 mm Dcsdpfszv Ulwsx Adhon Current list price: approx. 12.000 euros Special price upon request Features: - Semi-automatic electro-hydraulic band saw (INDUSTRIE) - Suitable for single-piece and small-batch production - Large, ball-bearing-mounted cast-iron rotary table * For miter cuts from 45° left to 60° right - Hydraulic cutting feed Material clamping - Continuously variable band speed (Model "F") - Ergonomic control panel - Micro-spray lubrication system (spray oiler) - 2x PEGAS roller conveyor - Operating instructions in German * Semi-automatic work cycle: After the cycle starts, the vise closes automatically; the saw frame lowers for the cut and automatically raises back to the predefined starting position once the cut is complete. Afterward, the vise opens.

Condition: good (used), Year of construction: 1995, CNC Wire EDM Machine AGIE AGIECUT 270 SF+F HSS Year of manufacture: 1995 Travel in X-axis: 350 mm Travel in Y-axis: 250 mm Travel in Z-axis: 256 mm Travel in U/V axes: ±70 mm Positioning resolution: 0.0001 mm Positioning accuracy: approx. ±3 µm Machining data Max. taper: 30° at a workpiece height of 100 mm Surface finish: up to approx. Ra 0.2 µm with multiple finishing passes Workpiece data Workpiece size, max. dimensions: 750 × 550 × 250 mm Workpiece weight, max.: 450 kg Wire system Wire diameter: 0.10 – 0.33 mm Wire speed: up to approx. 3 m/min Wire tension: CNC-controlled MACHINE DETAILS Control system: AGIEVISION / AGIE HSS Generator: AGIE HSS Mains connection: 3 × 400 V, 50 Hz Connected power: approx. 10.5 kVA Dcodpfx Aezzyhnsdhjn Dimensions & Weight Dimensions (L × W × H): approx. 2,215 × 2,215 × 2,220 mm Machine weight: approx. 3,600 kg EQUIPMENT Fully automatic wire threading

Year of construction: 2021, condition: excellent (used), Pump LOWARA ECOCIRC XL 40-180 F Dedpfx Ajzzwbledhjcn Capacity: 8 liters/s. Year of construction: 2021 - Rarely used Flanges DN40 Voltage: 230 V mono (see technical details on photos)

Condition: used, axle configuration: 3 axles, first registration: 05/2004, color: other, Year of construction: 2004, Empty weight: 4.740 kg Dsdpfxjynhvzs Adhecn Axle 1: left 8 mm right 8 mm Axle 2: left 8 mm right 8 mm Axle 3: left 8 mm right 8 mm We have the possibility to stack trailers!

Condition: new, Year of construction: 2026, rotational speed (max.): 36,000 rpm, Perfect for: Highly efficient 3D milling of small workpieces – precise milling with high output Materials: Plastics, composite materials such as CFRP / GFRP, model-building materials, aluminum Industries: Automotive, aerospace, transport & logistics, leisure industry, sanitary, boatbuilding, automation Reference number: 1221 Availability: April 2026 Model: 5-axis CNC milling machine G-S-F/B (25-13) Spindle data: 8 kW / 6.4 Nm; 1,000–36,000 rpm; HSK E 40 Rapid traverse X/Y/Z: 80/80/60 Workpiece dimensions X/Y/Z: 2,500 x 1,300 x 600 Dodpfox Uw Stsx Adhscn Control: SIEMENS – Sinumerik One with HT 2 handheld terminal Tool changer: 13 tools Tables: 1 rotary table Vacuum system: yes Tool breakage and length detection: Renishaw TS 27 R Other: upon request Year of manufacture: 2026 Condition: new

Condition: new, Year of construction: 2026, load capacity: 10,000 kg, Column lifting and rotating device, 10 tons lifting capacity, available as a set or individually. Driven on 2 sides. The machine is offered as a set for synchronous operation or individually. Protec rotating device / positioner Syncrolift. Double column, hand-held remote control, wireless and manual. Column adjustment, 2x electrically adjustable (at extra cost). Lifting capacity 10,000 kg, 360°. Minimum working height: 800 mm. Maximum working height: 1700 mm. Speed: 0.5 RPM. Diameter of clamping plate: 900 mm. Dodpfowtq Dtjx Adhscn Rotating movement: 2 x 2.2 kW. Torque: 18950 Nm. The machine is also offered individually as a mono model (more affordable). Optional with a universal joint flange (cardan flange).