Used Rotox Cleaning Automat for sale (27,737)

Condition: used, Year of construction: 2021, functionality: fully functional, Dürr Ecopure VAR 2206 Thermal Oxidizer with Flue Gas Cleaning (2021) For burning liquid and gaseous waste streams including fluorinated gases, e.g. PFAS, and recovery of aqueous hydrogen fluoride Emissions limits SO2 ≤ 100 mg/Nm³ NOX ≤ 30 mg/Nm³ CO ≤ 50 mg/Nm³ CF4 ≤ 70 mg/Nm³ HF ≤ 1 mg/Nm³ NH3 ≤ 2 mg/Nm³ Comprising Direct fired thermal oxidizer Hot gas cooling and acid recovery Alkaline wet scrubber Honeycomb selective catalytic reduction deNOx system >1M cost spare parts Direct fired thermal oxidizer Including 2x natural gas combustion chambers and burners - High calorific liquid waste requires safe ignition supplemental hydrogen supply for acid formation - Gaseous waste streams injected via nozzles downstream and close to the burner - 1.5MW multi-fuel natural gas & liquid waste (minor fuel stream) burner with natural gas capacity up to 200Nm3/h - 1400C normal, 1540C max allowable temperature destruction of pollutants to reduce emissions with 3.28 MW thermal energy transfer - 2 seconds minimum residence time in combustion chamber at 1400C - 1,800mm combustion chamber internal dia. - Approx 300mm refractory lining - 2,400mm combustion chamber external dia. - 12,000mm combustion chamber internal length - 3.28MW maximum thermal capacity - 4,900Nm3/h, 60mbar, 14kW combustion air fans One chamber is active, the other one is on standby and can be prepared, repaired, or maintained. This allows minimizing shutdown and changeover time to only several days Wet scrubber hot gas cooling and acid recovery SGL Carbon Diabon HT-PQ 850 graphite pipe quencher - 6,000 Nm3/h capacity flow - 1,100 mm dia. - 2,000mm high - pumps SGL Carbon Diabon THX-RS falling film absorber shell & tube heat exchanger - 1,100mm dia. - 4,500mm tube length - 595 no. tubes - 22mm tube internal dia. - Graphite, carbon steel Kdjdez Ai Tpspfx Akpsu - pumps Quench vessel - PP/FRP - 1,100mm dia. - Approx. 6,000mm high 2x Scrubber absorber columns, each - Shell FRP/PP - Internals PP - 1,000mm dia. - 11,000mm high - Pumps - Dosing station FRP 5m3 Emergency water tank - 1,600mm dia. - 3,000mm high - 3kW heating 2x Teblick 100,000L HDPE hydrofluoric acid tanks (2019) Honeycomb selective catalytic reduction deNOx system - 5,900Nm3/h, 130mbar, 42kW induced draft fan - 320 kW gas/gas heat exchanger - 500 kW capacity reheat burner - 1.2m deNOx honeycomb catalyst Clean gas outflow Stack with flow & temperature measurement Spare parts include - 200 items of sensors, pumps, valves, gaskets, joints etc. - Graphite quencher - Falling film absorber With the redesign and maintenance support of Dürr, the system could also - be adapted to other halogenated gases with bricks to be selected according to gas application - cope with the presence of VOCs or contaminated air - larger volumes with the addition of a small lance for 15kg/h liquid injection

Condition: ready for operation (used), Year of construction: 2013, overall weight: 4,600 kg, Panel saw manufactured in 2013. This FORMAT4 Kappa Automatic features a robust design with a weight of 4,600 kg and a powerful 14.0 kW motor. It includes an integrated control terminal with monitor, keyboard, and mouse, along with safety wire fencing and roller material support tables. If you are looking to get high-quality panel cutting capabilities, consider the FORMAT4 Kappa Automatic machine we have for sale. Contact us for further details. Kedpfx Aszx Uv Uskpedu - Voltage: 400 V- Phase: 3-phase- Frequency: 50 Hz- Power: 14.0 kW- Current: 28.0 A- Weight: 4,600 kg

Condition: used, Year of construction: 2018, Citizen Cincom L20E - 2M10 CNC Sliding Head Lathe with Cincom System M70LPC - VU CNC Control, Twin Spindle, Collet Chucks, 20mm Max Workpiece Diameter, 26 Tool Mounting Positions, 5 Lathe Tools, 7 Gang Tool Drilling, 6 Front Drilling, 8 Back Drilling, Driven Tool Capability, Spindle 1 - 200 - 10,000rpm, Spindle 2 - 200 - 8000rpm, Fire Track Automatic Fire Suppression System, Filtermist 5400, Parts Catcher & Conveyor, Serial No. QF6822 (2018) Imeca Boss 338-HD SM Barfeed, Serial No. 021941NA01 (2019), 2350kg. Country of Origin: Thailand Kjdpfx Akezzb Ayopsdu Location: These lots are located in Biggleswade, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: good (used), Year of construction: 2012, cutting diameter 260 mm saw band length 3.180 x 27 x 0,9 mm mm capacity 60 degrees: square 260 x 260 mm capacity 60 degrees: flat 320 x 260 mm cutting length min. 6 mm cutting speed 12 -120 m/min Control KASTO BasicControl total power requirement 2,5 kW weight of the machine ca. 1,4 t dimensions of the machine ca. LBH 2,37 x 1,35 x 1,77 m Sawing hours: 2,860 h. Includes 3-meter infeed roller conveyor Includes coolant system Includes spray gun for machine cleaning Fully hydraulic, high-performance automatic straight-cut band saw featuring a vertically descending and horizontally traversing saw blade; designed for series cutting of materials ranging from easy-to-machine to difficult-to-machine, including solid stock, tubes, and profiles. • Full machine enclosure • Vertically descending saw blade; selectable 0° or 1° head tilt • Hydraulic saw feed, infinitely variable from 0 – 300 mm/min • Hydraulic saw blade tensioning • Double-vice system: workpiece clamped on both sides of the saw blade • Linear guides on saw head, material feed, and vice assemblies • Saw blade retraction mechanism for contact-free withdrawal of the blade from the cut channel • SpeedControl (minimum speed monitoring) • Material feed: single stroke up to 850 mm, multiple feed up to 9,999 mm, chain-cut capability down to 250 mm cut length • Control system: KASTO BasicControl with 5.4" color touchscreen Kdedpfx Akez Dxr Ijpou

Condition: used, TORNOS DECO 2000/13 is a CNC automatic lathe engineered for precision machining, high accuracy and dependable reliability. Key capacities: 10 axes; max workpiece length 180 mm; internal spindle diameter 13 mm; spindle speeds 100-12000 t/min; back spindle 100-8000 t/min. Main specs: 50 Hz 3x400 V supply; spindle motor 2.2 kW; total power 11 kVA; weight approx. 2550 kg; footprint L2000×W1260×H1950 mm. Equipment: bar feeder IEMCA GENIUS 226/32, chip conveyor, coolant system, oil mist extractor. Achieves tight tolerances; typical applications: automotive, watchmaking, machine tools, aerospace, medical. Kjdpfx Akez Dvztopjdu

Condition: good (used), Year of construction: 1991, Tool press MOSSINI 680800, manufactured in 1991, pressing force 800 t, stroke 21 mm, stroke time 128 ms, with various accessories and tools. Kdedpfx Asz Icdvjkpou

Condition: used, Year of construction: 2003, Wood bandsaw blade setting machine Kohlbacher Stingrey Plasma welding process Fully automatic The hardfacing material is melted in a copper mold, creating a pre-shaped tooth Inductive stress relieving Blade width 30 - 360 mm Blade thickness 0.6 - 4 mm Adjustable tooth spacing 20 - 100 mm Kdjdpfez Hy Ucox Akpou Working speed 3 - 6 teeth/min. Welding material Stellite rods, 3.2 mm Ø Saw blade support Central electric clamping device for bandsaws up to 12 m

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 017, working width: 400 mm, compressed air connection: 8 bar, type of input current: AC, total width: 6,454 mm, total length: 7,685 mm, total height: 2,560 mm, overall weight: 5,000 kg, product height (max.): 150 mm, Equipment: CE marking, PERONDI LSV 5060 – Complete Production Line in Very Good Condition PERONDI LSV 5060 in very good condition, offered as a complete production line together with associated auxiliary equipment. The machine has been well maintained and carefully operated throughout its service life. The PERONDI LSV 5060 is in very good working condition and is ready for continued professional production. The machine has been regularly maintained and operated with care. Complete Production Line Includes: PERONDI LSV 5060 Kdedpoz Hl I Usfx Akpsu Wrapper Hot-melt glue system Feeder Vacuum belt Minimum Size box: 60 x 60 x 20 mm Maximum size box: 600 x 400 x 150 mm Machine highlights: Manufacturer: PERONDI Model: LSV 5060 Very good overall condition Well maintained Carefully operated Ready for continued production Inspection and demonstration possible by appointment The included equipment forms a complete and integrated production line, providing the buyer with a ready-to-use solution for continued professional production. This is an attractive opportunity to acquire a well-maintained PERONDI LSV 5060 together with all associated equipment, rather than purchasing the individual components separately. The complete line is currently available for inspection, and a demonstration can be arranged by appointment. Further technical specifications, photographs and additional information are available upon request.

Condition: good (used), Year of construction: 2006, Berg & Schmid Xtech 410 CNC sawing machine Year of manufacture: 2006 Control: - CNC control, freely programmable Cutting range: - Round: 410 mm - Flat: 410 mm Kedpfxsz Ii T Dj Akpsdu - Dimensions: approx. 3,500 × 2,000 × 2,200 mm - Working height: 730 mm Cutting speed: - 12–110 m/min Equipment: - Material feed via precision ball screw and linear guide - Hydraulic saw blade tensioning - Automatic double-sided saw blade free-travel device - Hydraulically driven chip conveyor - Clamping pressure adjustment for thin-walled tubes and profiles - Frequency-controlled saw drive, stepless - Infeed automation for the first cut - Blade tracking system Saw drive: - 5.5 kW

Condition: good (used), Year of construction: 2001, Tsugami BS12-III CNC sliding headstock automatic lathe TECHNICAL DATA turning diameter: 3-12 mm Turning length: 170 mm Max. Bore diameter: 7 mm Max. Internal thread diameter: M6 Speed: 12`000 rpm Speed, counter spindle: 6`000 rpm Number of axes: 6 Dimensions: approx. 190 x 130 x 220 mm Weight: 2200 kg No responsibility is taken for the correctness, completeness and up-to-dateness of the information. Kdedpoq H Ea Usfx Akpou

Condition: good (used), Year of construction: 2005, CITIZEN K12 CNC lathe TECHNICAL DATA Max. machining diameter: 12 mm Max. machining length: 200 mm Max. extension length: 80 mm Max. front drilling diameter: 10 mm Max. front thread diameter: M8 Spindle diameter: 16 mm Spindle speed: 15000 rpm Max. machining diameter of the counter spindle: 12 mm Max. machining length of the counter spindle: 40 mm Max. drilling diameter for rear machining: 6 mm Max. thread diameter for rear machining: M5 Spindle speed, counter spindle: 10000 rpm Tool attachment, number of tools: 8 Speed of the driven tools: 6000 rpm X1 axis: 122 mm Z1 axis: 200 mm Z2 axis: 150 mm Weight: 1950 kg SCOPE OF OFFER Ksdpjvrz H Rjfx Akpodu Among other things: (list not exhaustive) Citizen K12 CNC lathe Chip tray Transformer Complete operating documentation Exact scope of offer according to photo gallery We assume no liability for the accuracy, completeness and timeliness of the information

Condition: used, Closes bags automatically in line The Leximat ASM 60 takes over the neck of filled bags with guide belts, twists it together and closes it, with no operator needed at the machine. That makes it a good fit behind a weigher or filler for bread, vegetables, fruit or other bagged goods. Kedpjz Nc Uwefx Akpjdu The machine is built entirely in stainless steel with a guard over the closing section and is operated from a touchscreen. Servo drives control the movements. We did not find a rating plate with the year. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Automatic bag closer (in line) Drive: Servo motors Controls: Touchscreen Construction: Stainless steel, with guard over the closing section

Condition: used, Orange juicer with automatic fruit feed This automatic juicer from Zummo takes the oranges from the basket on top, cuts them in half and squeezes them between two cups. The juice runs out through the tap into your jug or bottle, and the peels drop into the bins in the base cabinet. Suited to fresh juice in kitchens, hotels, canteens or small-scale production. Kedpfoz Ndcvox Akpodu The juicer sits on a stainless steel base cabinet on castors. We have not been able to confirm the exact model or the year of manufacture. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Automatic citrus juicer Feed: Fruit basket on top Controls: Display with on/stop/select buttons Construction: On stainless steel cabinet with castors and peel bins

Condition: new, Product driven flow divider The filling flow divider can be used for several kind of products like meat, fish, pasta products, sauces and salads. Includes 1 nozzle per exit (round, square, triangular or rectangular) with a maximum outer diameter of 40 mm Product temperature up to ± 80 °C With universal connection With pneumatique knife Kdsdpfez Aph Hex Akpju 3 exits belt width 25 cm With support frame in height adjustable New

Year of construction: 1997, condition: reconditioned (used), functionality: fully functional, Automatic stop system for precise profile cuts with a length of 4200 mm Kedpfez H I D Sjx Akpsdu Motor-driven stop with electronic length measurement Robust steel construction with PVC-coated rollers Control via console with automatic repositioning The Microbo stop system enables precise and automated profile length measurement during sawing/punching/etc. The electrically operated slide moves on a ball bearing guide and is positioned via a numerically controlled system; the measurement is performed precisely from the center of the saw blade. PVC-coated rollers protect the profile surface and facilitate smooth sliding. All functions can be conveniently operated via the control console.

Condition: new, Year of construction: 2026, operating hours: 1 h, machine/vehicle number: CF 10 T / 1, Our CF 10T bottom flap folder with filling station is an inexpensive entry-level model. Cardboard boxes with a length of 200 to 600 mm and a width of 150 to 480 mm are fixed for filling and pneumatically transferred to the next station. This simple model comes with a magazine and runs on normal household electricity. The CF 10T requires compressed air for operation. Technical data: Dimensions 1400 x 950 x 700-860 mm Weight 90 kg Operating voltage 230 V / 600 W Compressed air 6 kgf/m3 Working height 700 - 800 mm Noise emission < 75 dB(A) Cardboard formats: Length 200 to 600 mm Width 150 to 480 mm Height 120 to 500 mm Roller conveyor is not included in the price, but can be purchased as an option. Kedpfxez E Il Tj Akpodu Can also be combined with one of our carton sealers on request.

Year of construction: 2026, condition: new, machine/vehicle number: KVK 3 Automatik_1, This automatic stretch wrapper with rotating turntable independently attaches the film to the pallet and cuts it after each wrapping cycle, unlike the semi-automatic KVK 3. Wrapping can conveniently be started by remote control—no need to get off the forklift or bend down to attach the film to the pallet. The machine is also equipped with a pre-stretch system for 250% elongation. This allows you to create up to 3.5 meters of wrapping film on the pallet from just 1 meter on the roll, greatly reducing your material consumption. Furthermore, the pre-stretch system applies minimal tension, so even lightweight goods remain stable and are not pulled from the turntable. At a weight of 700 kg, this model is very stable and engineered to handle loads of up to 2,000 kg. The KVK 3 Automatic features a 1,650 mm diameter turntable and, as standard, can wrap pallets up to 2,400 mm high. Adjustable turntable and film carriage speeds, along with a potentiometer-controlled power stretch unit, allow you to perfectly adapt the automated wrapping process to your product. Automatic pallet detection (via photocell) is standard, as are adjustable top and bottom wraps. Program options include “up only” wrapping, “up & down” (cross-wrapping), and “waterproof” wrapping. Manual operation is also possible if required. Kdsdpfx Akjz E Imqspsu If you need to relocate the machine, it can easily be lifted and moved using cut-outs designed for forklift tines. Options: In addition to a matching access ramp and a photocell for detecting dark goods or black film, the KVK 3 Automatic can also be optionally configured for wrapping heights up to 3,200 mm. This model is our clear recommendation if you are wrapping very lightweight goods or need to stretch-wrap more than approximately 30 pallets per day, with automatic film application and cutting. For further details, please see the technical data sheet attached as a PDF to this listing!

Year of construction: 2026, condition: new, Our KVK 1S - Economic is our most economical way to purchase a semi-automatic stretch wrapper. The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 600 kg, the model is sturdily built and designed for loads of up to 1500 kg. The KVK 1S Economic has a 1500 mm turntable and can wrap pallets up to 2250 mm high. With adjustable speeds of the turntable and film carriage, as well as the mechanical mechanical brake, you can easily adapt the automated wrapping to your product. Automatic recognition of your pallets is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rain-tight" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. A drive-on ramp and a photocell for detecting dark packaging materials or black film are optionally available. The KVK 1S Economic is our recommendation if you want to switch from manual to automatic wrapping of your pallets with as little investment as possible. This machine is ideal for shippers with pallet volumes of up to approx. 10 pallets per working day For further information we have attached the technical data sheet as PDF to this advertisement ! Kdsdpfx Aksz E In Iepou

Year of construction: 2026, condition: new, Our KVK 3 Slim Line is a semi-automatic stretch wrapper with turntable. It is equipped with a pre-stretch system for 250% stretching. Thanks to the pre-stretch system, you can produce up to 3.5 m of film on the pallet from 1 m of film on the roll and reduce your material consumption enormously. In addition, this system creates only minimal contact tension, so that even light packages are not pulled off the turntable. With a weight of 700 kg, this model is very stable and designed for loads of up to 1500 kg. The KVK 3 Slim Line has a 1500 mm turntable and can wrap pallets up to 2250 mm high as standard. With adjustable speeds for the turntable and film carriage, as well as a potentiometer-controlled power stretch unit, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs for "up & down" (cross wrapping) and "rainproof" wrapping are available. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. A suitable drive-on ramp and a photocell for detecting dark packaging materials or black film are optionally available. This model is our clear recommendation if you wrap very light packages or wrap more than approx. 20 pallets a day and do not exceed a maximum pallet dimension of 800 x 1200 x 2250 mm. Kdodpfez E Iwisx Akpou For further information we have attached the technical data sheet as PDF to this advertisement !

Year of construction: 2005, condition: used, Chamber spray cleaning system Basket usable dimensions, loading basket: L x W x H 842 x 659 x 512 mm Maximum loading weight: 100 kg; loading unit in front of the system included 2-tank design: Cleaning (1,200 liters) Rinsing (1,200 liters) System with electric heating - Cleaning process: Spraying - Basket remains stationary, swings, or rotates during the cleaning, rinsing, and drying process (freely selectable in the program) - Vacuum drying - Full filtration of the cleaning solution (Tank 1), 2x bag filters, filter fineness freely selectable - Automatic water refill for each tank - Coalescence oil separator External dimensions: 4,300 x 4,360 x 4,020 mm Kdodpfjz E I Sysx Akpsu System weight: 5 tons Connection power: 110 kVA Fuse: 250A Control: Siemens S7 The system is fully functional, but with the limitation that operation via the panel is only partially functional. This is a consignment sale; the system must be dismantled and collected on-site by the buyer.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, total length: 6,465 mm, total width: 600 mm, total height: 285 mm, load capacity per storage section: 1,200 kg, number of shelf rows: 96, We offer this fully functional KASTO UNIPORTAL 1.2 automated long material storage system, manufactured in 2001. Kodpfoz Hm Ebsx Akpodu It is in perfect working order. The long materials are stored in up to 96 cassettes, with a payload of 1.2 tons per cassette. Usable cassette dimensions: 600 x 285 x 6465 mm. The system can be inspected on-site. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 1997, functionality: fully functional, 1 x CNC long-turn lathe Star SA 12/16 Year of manufacture: 1997 Control system: Fanuc 18 i-T with loading magazine Iemca CH 220/32 Year of manufacture: 1998 Technical data: Spindle bore: 16 mm Spindle travel: 140 mm Main spindle speed: 500 - 12,000 rpm Counter spindle speed: 500 - 8,000 rpm Kdodpfxsz Hccio Akpju Speed: driven tools: 0 - 4,000 rpm (remaining data see photos) Approximately 6 months ago, the counter spindle was fitted with new bearings. The machine can be inspected while in operation and under power.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, actuation type: hydraulic, total height: 1,650 mm, total length: 2,495 mm, total width: 700 mm, overall weight: 780 kg, Equipment: CE marking, documentation/manual, Semi-automatic bandsaw for cutting medium-sized solid bars and profiles, offering high performance and excellent cutting precision. Robust bandsaw guides made with sealed guide bearings and adjustable tungsten carbide inserts. Blade tensioning achieved through manual rotation of the handwheel and guaranteed by an electromechanical device. Kdsdpfx Asz Nh S Ajkpsu Safety device to prevent accidents on the flywheel guard and on the blade. Cutting thickness: 1.5 mm Cutting range: 60° left, 60° right Adjustable stop for cuts of the same size Brush-type bandsaw cleaning device Hydraulic power unit motor: 0.55 kW Electropump: 0.06 kW for bandsaw cooling Vise, jaw height: 200 mm Vise, jaw length: 257 mm Work table height: 760 mm Machine weight: 780 kg Cutting capacity: -0-45-60° Solid round bar 0°: 150 mm Tubular round bar 0°: 350 mm Square bar 0°: 330 mm Rectangular bar 0°: 150 x 320 mm Solid round bar 45°: 150 mm Tubular round bar 45°: 310 mm Square bar 45°: 280 mm Rectangular bar 45°: 150 x 320 mm Vise opening: 420 mm Variable speed drive: 20-90 rpm

Year of construction: 2025, condition: used, M.S.K. / Tryma OMRM 133 Sawing Machine + TM-127 Copying Router (Set of 2 machines, 2025) We offer this complete set of two virtually new machines for processing aluminum and PVC profiles (Year of manufacture: 2025). The machines can be purchased together as a set or individually. 1. M.S.K. / Tryma OMRM 133 (TM-133) Automatic 2-Head Sawing Machine - Asking price for individual sale: €31,500 excl. VAT (New value: €37,420 excl. VAT) - Specifications: Year of manufacture: 2025 | Serial number: 25DCM330004 | Power: 6.5 kW | 400 V (50 Hz) | 1220 kg - Suitable for quickly and accurately sawing PVC and aluminum profiles - Equipped with 2 saw blades, diameter 550 mm - Console with industrial PC and integrated label printer - Automatic opening and closing of the safety guards - Horizontal and vertical pneumatic profile clamping - Fixed left head and automatically adjustable right head with roller conveyor - Servo motor guarantees fast movement and precision via linear guides - Pneumatic tilting of heads (90° / 45° inward) + mechanical adjustment for intermediate angles - Sawing length max. 5,000 mm (overlengths up to 7,500 mm possible, min. length 290 mm) - Including central support for support and dust extraction option 2. Tryma TM-127 Manual Copying Router Machine (3 spindles) - Asking price for individual sale: €9,500 excl. VAT (New value: €11,330 excl. VAT) - For quickly and easily routing PVC and aluminum profiles - 3-sided processing without reclamping (1 vertical and 2 horizontal copying heads) - Horizontal and vertical templates with standard operations - Automatic locking of cutting depth via pneumatic clamps - Horizontal and vertical pneumatic pins (4, 6 and 8 mm) Kdodpfx Akey Encwopou - Smooth movement via recirculating ball bearings, shock absorbers and ergonomic handle - Including roller conveyors of 1,500 mm (left and right) and pneumatic cooling spray - Profile height: min. 40 mm / max. 110 mm | Profile width: max. 150 mm If you have any questions, are interested in the complete set or an individual machine, please feel free to send us a message or call us.

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: BA 32-200, SICA MUFFENMASCHINE 2F.1T 32-200 Application: KG-U PVC pipes, Pipe lengths: 0.5 m, 1 m, 2 m, 5 m, 6 m Kdodpjxiy R Ejfx Akpsu Year of manufacture: 2007 1 socket per cycle Socketing tools: 110×3.2 The socketing machine is in very good condition, still operational and scheduled to be taken out of production in 3-4 months.