Used Robust Industrial Hydraulic Press for sale (53,644)

Condition: used, Year of construction: 1982, Technical details: pressure: 16 t stroke: 250 mm throat: 270 mm dayligth: ca. 400 mm table surface area: 800 x 500 mm boring diameter: Ø 50 mm ram surface area: 220 x 360 mm mortise hole in ram: Ø 40 mm table height over floor: 970 mm Dodpfx Aaou Nfmye Ioku voltage: 380 / 50 Hz V control voltage: 220 V / 50 Hz total power requirement: 3,0 kW weight of the machine ca.: 2,3 t dimension machine xH: 1,8 x 1,5 x 2,72 m Press frame in robust welded construction. Adjustment of the operating mode via switch: inching, two-hand, foot or continuous operation with feed Press has a piece counter on the side with overload protection (pressure relief valve) with cutting shock damping Light curtain SICK optical electronics (can be repaired optionally) *

Condition: new, neu ca. 8 Wochen ab Auftragse Italien 9000 € 173.7 € 30 to fix Dsdpsypbuasfx Aa Ioku 350 mm 920 mm 900 mm max. 9 mm/s 0,75 kW 1600 mm 700 mm 2050 mm 430 kg The hydraulic movement of the piston is controlled by a handwheel, which enables very sensitive and precise positioning. One-handed operation is possible thanks to the working speed of less than 10 mm/s. Very suitable for straightening and pressing work. The cylinder can be moved sideway by handwheel (only "M" versions)

Condition: good (used), Year of construction: 1994, functionality: fully functional, operating hours: 25,000 h, pressing force: 400 t, table width: 1,360 mm, table length: 2,000 mm, table height: 1,125 mm, oil tank capacity: 3,400 l, total width: 3,500 mm, total height: 4,600 mm, installation height: 600 mm, Further images and technical data can be provided by email upon request. Sale is ex-location without warranty and return. Dismantling and collection must be carried out by the buyer. The press is standing at ground level without a base. We deliver the press media-free. The digital hours counter is no longer accurate. The manual counter shows approximately 25,000 hours. Dksdpfovb D Trox Aa Iou

Condition: used, Hydraulic Press Brake SAGITA BEYELER 200/4000 Djdpjz Hwhmefx Aa Isku Slide travel: 150 mm Throat depth: 300 mm Distance between uprights: 3100 mm Motor power: 15 kW Manual Back gear gauge The machine was only used for pre-bending of Hardox sheet Voltage: 380 V Dimensions (L x W x H): 4100 x 1800 x 2700 mm Weight: approx 15 T

Condition: good (used), Year of construction: 2007, frame press GOMA PHA 3500 Door Press hydraulic Location Gorzów Wlkp. Conditions of delivery Djdpfx Aasdntc Nj Ijku OWN RECEIVING Cost of delivery to be negotiated Startup type to be negotiated Description Comments Working space 3500 x 2300 mm 1000kG (daN) pressure, engine at hydraulic unit 2,2 kW lenght 3500 mm hight 2300 mm weight 2000 kg agrageate hydraulic

Year of construction: 2002, condition: good (used), Used Rhodes 60ton hydraulic press for sale Four pillar hydraulic press for sale. Year/new: 2002 Nominal force: 63 tonnes Design pressure: 200 bar Maximum stroke: 250 mm Dodpfxon Tnv Eo Aa Ijku Approach speed: 150 mm/s Pressing speed: 15 mm/s Return speed: 150 mm/s Maximum tool size: 800 mm x 800 mm Maximum top tool mass: 750 kg Mass of press: 7000 kg Number of lifting points: 4 Electrical supply 400-3-50 Pneumatic supply 5.5 bar Worson Die Cushion Type DDC 104 In stock and available for immediate delivery. Can quote for new hydraulic c, d and h frame presses. Free standing hydraulic press complete with hydraulic cushion.

Condition: used, Year of construction: 2008, Manufacturer: Fritz Müller Machine type: Hydraulic drawing press Type: BZE 1200 – 35.1.1 Year of manufacture: 1972 General overhaul: 2008 Total drawing force, press ram: 1,000 – 12,000 kN Drawing force: 7,000 kN Holding force per cylinder: 200 – 1,250 kN Ram surface area: 3,500 × 2,200 mm Max. ram stroke: 1,330 mm Max. drawing depth: 430 mm Distance, table – holding cylinder, top dead center: 2,700 mm Distance, table – holding cylinder, bottom dead center: 1,420 mm Distance, table – ram, top dead center: 2,500 mm Distance, table – ram, bottom dead center: 1,200 / 1,600 mm Hydraulic table cushion, one-piece: Displacement force: 800 – 2,500 kN Stroke: 0 – 300 mm Cushion surface area: 2,700 × 1,200 mm Table clamping surface: 3,500 × 2,200 mm Clear width between guides: 3,550 mm Max. tool weight: 32 t Max. plate width: 2,200 mm Max. plate length: 1,600 mm Sheet metal thickness: 0.5 – 2.5 mm Feeding height above table: 650 – 900 mm Max. single part weight: 40 kg Max. stack height: 450 mm Max. weight per plate stack: 4.5 t Single or double plate feeding possible Electronic double sheet control available Rapid descent speed: max. 500 mm/s, unregulated Working speed: 30 – 115 mm/s Return speed: 30 – 600 mm/s Documentation: No digital data available Djdey Ndz Rjpfx Aa Ijku Drawings: Partially available as ink drawings; on-site inspection possible Packing lists: No packing lists with individual weights available

Condition: ready for operation (used), functionality: fully functional, pressing force: 100 t, stroke length: 250 mm, table width: 600 mm, table length: 1,000 mm, ram plate length: 300 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Pressing force: 100 t Maximum stroke: 250 mm Press model: Workshop press Press design: Single-acting Table length: 1,000 mm Table width: 600 mm Table bore diameter: 140 mm Ram length: 300 mm Ram width: 300 mm Dkjdpfx Aszza Uhsa Ieu Height adjustment: 250 mm Column spacing, length: 2,000 mm MACHINE DETAILS Drive system: Conventional Transport packages: 3 pieces Transport weight: 8,000 kg

Condition: used, Technical details: pressure: 6 t distance between columns: - mm stroke: 130 mm table surface area: 1200x550x30 mm throat: 500 mm total power requirement: 1,1 kW weight of the machine approx.: 1000 kg space requirements of the machine approx.: L:1,8xB:0,9xH:0,9 m HORIZONTAL SS - operation through keyboard - operating pressure: 10 to 600bar stepless adjustable - work piece clamping area is adjusted through manual screwing of slide-counter holding plate - sizes of counter holding plate: L: 500xW:300xH:35mm Dedpfx Aasu Nfm Te Isku - stroke of slide plate: 130mm - silde clamping plate: 550x300x35mm functional *

Condition: used, 60 to stroke 400 mm dayligth 900 mm 825 mm 295 mm Heads 150x95 mm feed up 5,6 mm/sec Dkodpfjyv Nm Ssx Aa Ieu feed down 9,4 mm/sec total power requirement 4 kW weight of the machine ca. 700 kg Overall size 1460x850x2400 mm Further information: stable welded construction Printing cylinder adjustable Operation electrically via shift lever / manually via hand lever Pressure display by manometer Height of material supports adjustable by cylinder CE mark

Condition: used, Year of construction: 2003, Technical details: Pressure: 60 t stroke: 400 mm table surface area: 700 x 700 mm passage opening in table: Ø 100 mm distance between columns: 700 mm distance between columns: 700 x 1300 mm table height over floor: 850 mm dayligth: max. 1150 mm daylight dimension : table/slide up: 400 - 800 mm cylinder diameter: Ø 110 mm total power requirement: 4,8 kW machine weight approx.: 930 kg dimension machine approx.LxWxH: 1,2 x 0,7 x 3,0 m Dedszvnrdjpfx Aa Ijku HYDRAULIC DOUBLE COLUMN PRESS Special construction welded from 25 mm sheet steel Operating mode: single stroke Punch holder: pin M 70 x 2.5mm and punch Ø 128 x 440mm Table protection housing Round punch Ø 130 x 120 mm Hydraulic unit *

Condition: excellent (used), I sell a Lukas baler in very good condition. Dkodjum Htzjpfx Aa Iou

Condition: ready for operation (used), Year of construction: 1992, Compressive force: 1000kN/100t, ram stroke: 200mm, max. operating pressure: 290bar, control: DNC70, safety distance: 166mm, overtravel time: 104ms, overtravel distance: 7mm. Dkedpfxjwcz Axe Aa Iju

Year of construction: 1997, condition: used, Technical details: pressure: 250 t stroke: ca. 400 mm Dksdsu Nfn Ropfx Aa Iju pass through width: 640 mm table above floor: 900 mm ram stroke speed: regulierbar/adjustable passage between the side columns: 470 mm table clamping surface LxW: 570x550 mm clamping area of ram: 570x550 mm total power requirement: 56 kW weight of the machine ca.: ca. 9,0 t dimension machine xH: 2,5x1,8x3,8 m transport dimensions LxWxH: 2,6x1,8x3,1 m - control manual and via automatic via SPS Allen Bradley - one hand and two hand control - ram guidance column, zero backlash - set up mode and automatic mode via SPS controlled - light curtain type "Sick" and safety curtains installed - no CE certification available i.D. *

Condition: new, Year of construction: 2026, TECHNICAL DATA Dedpfx Aasi Amnpo Ijku Pressing force 30t Maximum load on prism jaw 7.5t Piston stroke 160mm Piston travel 550mm Dimensions and weights Length (product) approx. 1240mm Width/Depth (product) approx. 650mm Height (product) approx. 1920mm Weight (net) approx. 280kg Clear opening 790mm Maximum installation height 1030mm Frame depth 200mm SCOPE OF DELIVERY 2-part prism set for inserting round material Hand and foot levers Winch for raising and lowering the table Location: Ex works - available for immediate delivery -

Condition: used, pressure 2 t throat 150 mm stroke 150 mm table surface area 310 x 250 mm power requirement 2,0 kW weight of the machine ca. 0,6 t dimensions of the machine ca. 1,2 x 0,8 x 1,7 m Single column press - with table base - various press accessories Djdpfx Aetzv Hmoa Ioku

Condition: used, Year of construction: 1990, pressure 100 t table surface area 800 x 800 mm ram stroke 450 mm throat 400 mm dayligth 800 mm table height over floor 900 mm die cushion capacity 40 t die cushion stroke 200 mm oil volume 700 l rapid traverse - down 185 mm/sec Dkodpsyif Nrjfx Aa Iju rapid traverse - up 160 mm/sec working feed 55 mm/sec total power requirement 17 kW weight of the machine ca. 5 t dimensions of the machine ca. 2,2 x 1,2 x 3,4 m Machine has cushion in table.

Year of construction: 2002, condition: used, Used Rhodes 60ton hydraulic press for sale Four pillar hydraulic press for sale. Year/new: 2002 Nominal force: 63 tonnes Design pressure: 200 bar Maximum stroke: 250 mm Approach speed: 150 mm/s Pressing speed: 15 mm/s Return speed: 150 mm/s Maximum tool size: 800 mm x 800 mm Maximum top tool mass: 750 kg Mass of press: 7000 kg Number of lifting points: 4 Electrical supply 400-3-50 Pneumatic supply 5.5 bar Dedpfx Aaef A R Ade Ieku Worson Die Cushion Type DDC 104 In stock and available for immediate delivery. Can quote for new hydraulic c, d and h frame presses. Free standing hydraulic press complete with hydraulic cushion.

Condition: defective spare-parts repository (used), Year of construction: 1999, machine/vehicle number: REP 01.23, functionality: not functional, pressing force: 1,000 t, table length: 1,000 mm, retraction force: 400 t, Equipment: CE marking, safety light barrier, We are offering this defective REPKON RHHP 100 1000/400 kN hydraulic press with a draw cushion, manufactured in 1999. Dksdpszub Nmjfx Aa Ieu Manufacturer: REPKON Model: RHHP 100 1000/400 kN Year of manufacture: approx. 1999 Control system defective If you have any questions or require further information, please do not hesitate to contact us.

Year of construction: 1990, condition: like new (used), Used Schuler hydraulic press for sale Brand : Schuler Schuler EB 2-500- 2.75-0.85 H-frame hydraulic press Power ( ton ) : 500 tons Table dimensions ( x-y/mm) : 3000×1800 Slide dimensions ( x-y/mm) : 3000×1800 Stroke ( x/mm) : 850 Stroke per minute from 12 to 24 Control Siemens S7 Dodpfx Aaehcnxre Ieku New hydraulic presses for sale

Condition: good (used), Code: 0158 Brand: ITALPRESSE Model: LOCK FORM SYSTEM AIR - CE Standard Hydraulic air membrane press with loading and unloading - CE Standard 3-D coated on one face lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Dkjdspvk Dijpfx Aa Iju Platen dimensions mm 2650 x 1250 Piece height mm 55 Pressure control manometer Automatic pressure reset Opening timer

Condition: new, neu ca. 8 Wochen ab Auftragse Italien 13500 € 259.2 € 70 to fix 350 mm Dkedpfxjwiq Aus Aa Ieu 900 mm 1050 mm max. 9 mm/s 2 kW 1900 mm 850 mm 2250 mm 1030 kg The hydraulic movement of the piston is controlled by a handwheel, which enables very sensitive and precise positioning. One-handed operation is possible thanks to the working speed of less than 10 mm/s. Very suitable for straightening and pressing work. The cylinder can be moved sideway by handwheel (only "M" versions)

Condition: new, neu ca. 14 - 16 Wochen ab Auf Italien 38000 € 725.8 € 100 to fix 1250 mm 500 mm 780 mm 1500 mm 25 mm/s 10 mm/s 4 mm/s 1300x600 mm 1250x400 mm 2400 mm 1200 mm 2450 mm 2450 kg Hydraulic multifunction workshop press for pressing and straightening and optional bending Version A (automatik): with 2-hand panel with limit micron switch for up/downstroke stop, automatic piston retraction, Siemens CPU Version S (semiautomatik): 2-hand function by hand lever and pushbutton, limit micron switch for up/downstroke stop Standardmodel for pressing and straightening: table with t-sloats and straightening punch Dsdpjypbutsfx Aa Ieku OPTIONS: Bending accessorie with tool holder, upper tool, dies with 4 slots and 2 frontal support arms Mobile truck for quick assembly/disassembly of bending unit Siemens control Pressure switch Heat exchanger Piece counter Timer Plate supports for the rear side Safety light guard ALTERNATIVE: Version S (semiautomatik) € 30.000,00

Condition: excellent (used), Year of construction: 2001, - No. 4 Schuler 630-ton presses - Capacity: 630 tons - Stroke: 1,300 mm Djdpfx Aozy Uvqea Ijku - Die cushion tonnage: 24 – 160 tons - Die cushion stroke: 200 mm - Die opening (Pmi): 800 mm - Work surfaces: 2,500 x 2,100 mm - Mobile press tables: No. 2 - Approach speed: 600 mm/min - Working speed (50%): 96 mm/min - Working speed (100%): 46 mm/min

Condition: excellent (used), Year of construction: 2004, SCHULER HYDRAP Dedpez Ei A Tofx Aa Ieku Year of manufacture: 2004 Press force: 10,000 kN Stroke length max.: 1,650 mm Installation height: 2,400 mm Closing speed: 420 mm/s Working speed max.: 68 mm/s Working speed at rated force: 21 mm/s Tool base area max.: 3,900 x 2,400 mm Tool base area min.: 1,800 x 1,200 mm Tool installation height: 750 mm Tool weight max.: 50,000 kg