Used Rgm Sn3Fl for sale (207)

Condition: new, Factory-new agitated vessel with dissolver Type: STOC2200RWD Volume: approx. 2,266 liters Design: Vertical construction on three height-adjustable feet Construction: Single-walled Medium-contacting material: 1.4301 stainless steel (AISI304) Surface: External satin finish, internal BA (IIId) Internal weld seams: Pickled, passivated and brushed Max. operating pressure: Atmospheric Max. operating temperature: 95°C Top: 15° conical top Bottom: 15° conical bottom with central outlet DN50 DIN11851 Tank dimensions: Tank diameter: 1,430 mm Cylinder height: 1,250 mm Total height: 2,160 mm Foot height: 500 mm Outlet to floor distance: 350 mm Equipment: 1x Ø 500 mm manway cover with swivel bracket on top, EPDM gasket 1x agitator flange connection IEC200 3x calotte / height-adjustable feet 1x stainless steel vent/bleeder valve DN50, non-pressurized, on the top 1x DN50 DIN11851 outlet port centered in the bottom 1x DN50 DIN11851 port with blanking cap on the top 1x DN65 DIN11851 port with blanking cap on the top Bledsw Dy Hljpfx Alceh 2x lifting lugs on the top 1x ladder bracket on the cylinder 1x nameplate Agitator: Dissolver Manufacturer: Schwarzer Rührtechnik GmbH Type: SRTDMK/7.5-1500 Power: 7.5 kW Speed: 1,410 RPM Operating voltage: 3PH 400V - Heavy-duty agitator shaft mounted to the agitator motor with muff coupling - Agitator shaft dynamically balanced for smooth running within the speed range - 1 piece dissolver disc Ø 275 mm screwed onto the end of the agitator shaft - Stainless steel flange with V-ring seal, EPDM - Motor mounted flexibly on neoprene rubber-metal buffers

Condition: new, Factory-new stainless steel transport container with anchor agitator Type: SLA1150RWA Volume: Approx. 1150L Design: Vertical construction with forklift pockets Execution: Single-walled, min. 1.5mm wall thickness Material (media-contacting): 1.4301 stainless steel Surface: Satin finish outside, IIId inside Internal weld seams: Pickled, passivated, and brushed Operating pressure: Atmospheric Top cover: Central traverse with two hinged lid halves Bottom: Torispherical head with discharge groove Tank dimensions: Tank diameter: 1190mm Cylinder height: 1000mm Total height: 1300mm (plus agitator motor) Blsdow Dy Ngjpfx Alcsh Features: - Central traverse with two hinged lid halves, stainless steel perforated plates underneath the hinged lid as reach-in protection, bolted, removable - Tank mounted on a stainless steel transport base with forklift openings - DN50 disc valve outlet fitting DIN1185, seal EPDM - Nameplate Agitator: Central anchor agitator Manufacturer: Schwarzer Rührtechnik GmbH Type: SRTGMK/0.75-13 Power: 0.75KW Speed: 13 RPM Operating voltage: 3PH 400V Product-contacting material: 1.4301 stainless steel - Gearbox by Getriebebau NORD - Solid agitator shaft connected to the agitator motor with a sleeve coupling, removable - Agitator shaft balanced for smooth rotation within the speed range - Large-surface stainless steel anchor-style agitator, welded design, weld seams pickled, passivated, and brushed - Stainless steel flange with shaft seal, EPDM Agitator control: CEE plug switch on the tank, on/off switch, no-voltage release, emergency stop Fully prewired

Year of construction: 2011, condition: ready for operation (used), The ultrafiltration plant is used for purification of various liquids. Bljdpfjf Dc D Hsx Alcjh liquids. The membrane elements are a 37/3.8 channel design, 0.1ìm fineness and a length of 1300 mm. In each of the two modules are installed 32 ceramic rods with a total capacity of 2,000 L / h each. 1 piece construction frame,1 piece feed pump,1 piece rod heater, 2 pieces bleed pump, 1 piece cleaning tank, 1 piece membrane valve, 1 pcs compressed air diaphragm pump, 1 pcs UF ceramic module, 1 pcs tem. over. 1 piece control valve, 4 pieces pressure measurement with display, 1 piece control unit according to VDE 0110/0113 CE, 1 piece flow measurement, 1 piece pre-assembly of the plant in the factory of the contractor,

Condition: new, Year of construction: 2024, Drying and Burn-in Furnace TRO, Model I For drying racks with max. 50rods, useable size 60x90cm, outer dimensions: approx. 2290mm wide x 1390mm deep x 2230mm high, useable space: approx. 1400x1070x1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539. Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: approx. 650kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easile adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. Delivery time 10-12 weeks. ATTENTION: Not permitted for solvents! Not permitted for foods! Bjdpfx Aod I T Exslcslh

Condition: new, Year of construction: 2022, machine/vehicle number: 20b015, Fully Automatic Printing Tower for Crate Printing on 4sides Electro pneumatically controlled fully-automatic screen printing machine for rotary printing, with microprocessor control, equipped with feed, printing and ejector station, pneumatic squeegee pressure adjustable via manometer, pneumatic squeegee switching, with squeegee quick clamping system, squeegee stroke, adjustable squeegee pressure. Printing movements individually adjustable when working in one-shift operation. All four sides of the crate will be printed at the same time in different colours and motivs. 800crates per hour enable a precise reproduction ability and a high productivity. Special hose pumps apply the ink onto the horizontal positioned screen frames. In that way each side of the crate gets an even ink application. The screens can be exchanged within minutes which, in turn, reduces the holding time. The multi-functional system of the printing tower makes a change of both logo and ink possible within short time thus enabling short set-up times. Bodpfoihccfox Alcelh A modern electronic control via display ensures the requested process control and helps analysing any faults. The step-by-step operation mode show the printing status during the automatic production run resp. during the set-up by the operator.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 07/018, overall weight: 2,900 kg, inner diameter: 2,500 mm, temperature: 65 °C, heating capacity: 4 kW (5.44 HP), load capacity: 1,500 kg, Equipment: documentation/manual, Cleaning System Type W 250 Used, low operating hours Available immediately. Useful dimensions: • Basket diameter: 2,500 mm • Usable internal height: 1,200 mm • Basket load capacity: 1,500 kg With the following features: • Washing • Rinsing • Hot air drying 2 x 10 kW • Plate phase separator for oil removal • Automatic filling device • Chip filter with lye cover plate • Indirect bath heating stainless steel/ceramic • Vapor extraction • Rinse water extraction • Automatic pumping system with floor flushing • PLC with operator panel Bjdexgcx Tspfx Alcolh • Pull-out washing basket with transport trolley Current new price: approx. €160,000.00 Offer price: €70,000.00 Unpacked, ex works Bad Salzuflen. Payment: Due immediately, net.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1746, shaft length: 10,564 mm, laser power: 100 W, type of cooling: air, working range: 1,750 mm, overall weight: 205 kg, table height: 1,760 mm, table length: 12,000 mm, table width: 9,200 mm, Equipment: cabin, Used fiber laser system for laser marking, engraving, marking, and microstructuring on metals and plastics. Ex-display machine, laser class 1, CE-compliant, Made in Germany. Laser & Beam Source - IPG Ytterbium fiber laser - Power: 100 W - Wavelength: 10564 nm - Pulse energy: 0.2–1.0 mJ - Cooling: Air-cooled, no external cooling required - Power supply: 230 V / 50 Hz - Scanner: X-Y galvanometer with mirror mount for 1064 nm Note: Manufacturer’s lab values; actual values may vary depending on the application. Scanner & Control - F-Theta lens: f = 254 mm, anti-reflection protective glass - Marking field: 175 × 175 mm - Max. scan speed: 4 m/s Industrial PC with Windows 11 Pro, SSD storage - Controller cards for laser & scanner - Digital & analog interfaces: RS232, Ethernet, USB - Custom adaptations optional - 19" TFT color monitor, keyboard & mouse - SK CONTROL software - Industrial software for texts, logos, QR codes, variable data - Intuitive user interface, logo/photo import via mouse click - Job management and parameter library for reproducible quality - Pilot laser displays laser position as red rectangle Workstation 1 – SK LASER - Enclosed laser class 1 workstation - Combined sitting/standing workstation - Aluminum profile housing, front door with laser safety glass, bright work lighting - Dimensions: H 1760 × W 920 × D 1200 mm - Stainless steel worktop with 25-mm hole grid, 710 × 400 mm - Motorized Z-axis, travel 500 mm (gross) Bljdpfxoyfvhge Alcsh - Rear door for oversized workpieces (when open: laser class 4) - Extraction nozzle DN50 for fume extraction - Redundant safety equipment: emergency stop, interlock, safety relay performance level 4 - Operating temperature: 15–35°C - Connection load: 230 V / 50 Hz Condition & Delivery - Ex-display, tested machine - Optionally: Delivery including commissioning within Germany

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, shaft length: 10,600 mm, laser power: 60 W, type of cooling: air, total width: 800 mm, total height: 1,800 mm, total length: 1,700 mm, working range: 1,200 mm, warranty duration: 6 months, height adjustment type: electric, table height: 7,000 mm, table length: 4,000 mm, Equipment: cabin, Used CO₂ laser system for marking, engraving, and cutting plastics, wood, acrylic, paper, and more. Refurbished, 6-month warranty, Made in Germany. Technical Specifications - Laser source: CO₂ laser, beam source refurbished in 2023 - Peak power: 60 W - Wavelength: 9,600 nm - Cooling: air cooling - Power supply: 230 V / 50 Hz - Scanner & optics - X-Y galvo scanner with mirror mount - F-theta lens: F = 200 mm, anti-reflective protective glass - Working area: 120 × 120 mm (other lenses available on request) Machine & Work Area - Fully enclosed workstation - Dimensions (W/H/D): 910 × 255 × 200 mm - Extraction port available (extraction system not included) Bledpfx Aloyfucvecoh Control & Software - Industrial PC Marking software: - Texts, logos, variable data - Import of DXF, PLT, WMF, bitmap - Intuitive, user-friendly interface Scope of Delivery & Safety - Complete machine, workstation - 6-month warranty - CE certified, TÜV-tested Condition & Delivery - Refurbished, technically tested Offer valid ex works plus shipping, while stocks last

Condition: used, Kerzenfilter für 3 Filterkerzen mit 20" länge. Blsdpfx Aoxytynolcjh

Year of construction: 2008, condition: good (used), Machine type: Finishing machine Manufacturer: Supfina Grieshaber GmbH & Co. KG Model: 622/1 Serial number: 760001 Year of manufacture: 2008 Available immediately Ex site for self disassembly Optionally we can offer dismantling and loading Bljdpfx Aelrt Saslceh

Year of construction: 2024, condition: new, Cutting force 30 Tons or 60 Tons Table surface 1000x600mm or 1600x800 mm The electro-hydraulic upstroke cutting machine with motorized moveable beam type USC is a machine which has been constructed due to our long experience on this area of cutting machines. They are characterized by maximum operational reliability and an optimal overview onto the working table when the cutting beam is retracted. In the standard version of machine the working cycle is released by the contactless operating security light curtain or via the 2 start buttons mounted on the left and right of the machine. The stroke and passage of the machine are continuously adjustable within the specified limits via an electronic measuring system / potentiometer. An eccentric load on the machine is possible due to the extremely stable central guide column and the arrangement of the two hydraulic punching cylinders. The hydraulic power unit in the modular system is housed entirely at the rear of the machine and is easy to access for maintenance purposes. An automatic central lubrication supplies all lubrication points in the stand with a sufficient quantity of lubricating oil. Blodpfxenfu Nwe Alceh The electrical switching devices are housed in a separate control cabinet, which is permanently installed on the machine. The setting of the machine by means of clear operator guidance is carried out via the touch panel on the side of the machine. A freely programmable controller processes the processes reliably and quickly.

Year of construction: 2024, condition: new, Beam Cutting Machine with receding beam Cutting Area 1800x1200 mm Cutting force 130 Tons Blsdpfx Aoim R N Uslceh

Year of construction: 2020, condition: new, Beam Cutting Machine with automatic table Cutting Area 2000x1000mm Cutting Force 200 Tons Blsdpfx Ajfubr Hslcjh

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 2,300 mm, total width: 1,300 mm, total length: 2,500 mm, Our innovative welding cell maximizes the efficiency and flexibility of your production. Equipped with a Kuka KR6 robot and a Dinse welding torch, it offers two processing stations for a continuous production chain. The KRC4 control cabinet controls the robot precisely and ensures maximum reliability and seamless integration into modern production systems. The user-friendly interface makes programming easier and ensures consistently high welding quality. This compact solution sustainably increases productivity and reduces costs Bljdpfxjvz Tv No Alcoh Cell: ◦ 2.50 m x 1.30 m x 2.30 m ◦ 2 processing stations approx. 80 cm x 80 cm ◦ Can be combined with the desired welding machine on request Fronius, Lorch etc... ◦ Immediately available ◦ Location Worms in Rhineland-Palatinate Control cabinet: ◦ Controller: KRC 4 Compact ◦ Hard drive: SSD ◦ Interface: USB 3.0, GbE, DVI-I ◦ Ambient temperature: +5°C to +45°C Robot: ◦ Kuka KR-6 R900 sixx Agilus series ◦ 6 axes ◦ Max. payload: 6 kg ◦ Range: 0.9 m ◦ Repeatability: ± 0.02 mm ◦ Year of manufacture 2017 Visit our website and let's achieve your production goals together!

Condition: used, functionality: fully functional, Year of construction: 2018, machine/vehicle number: 18089754, laser type: fiber laser, Description: High-performance fiber laser from IPG Laser GmbH, manufactured in Germany. The laser is designed for industrial applications such as cutting, welding, or surface processing and is distinguished by high efficiency, stable beam quality, and robust construction. Technical data: Manufacturer: IPG Laser GmbH, Burbach, Germany Model: YLS-4000-S2T Serial number: 18089754 Year of manufacture: September 2018 Bsdpfxsxv Dp Se Alcslh Rated voltage: 400–460 V AC, 3 phases + PE Frequency: 50 / 60 Hz Full load current: 29.3 A Circuit protection: 32 A / 120 kA CE marking: present

Condition: used, functionality: unexamined, Wostor Euromarker basic 150 - Screw handle broken and slightly bent Blodpfow U Ir Njx Alcsh - Shipping possible at extra cost

Condition: used, Year of construction: 2000, functionality: fully functional, 7 x Chain Conveyors for Euro Pallets Manufacturer: Krifft + Zipsner GmbH Model: BPA-7-M Year of manufacture: 2000 Drive motor: (7x) R37DT80N4; 0.75kW; 29 rpm; B3 mounting Chain spacing: 4 x 1050 mm 3 x 920 mm Overall height of conveyor: 350 mm (as shown in photos) Height from floor level to underside of conveyor (adjustment screw): 75 mm Conveyor length: 5 x 1600 mm 2 x 2000 mm Mains voltage: 400V Frequency: 50Hz Control voltage: 24V DC Bsdot R Rrpjpfx Alcslh Rated current: 20A Supply line protection: 35A Max. load capacity conveyor system: 1500 kg Pallet type: Width = 800–1100 mm, Length = 1200–1600 mm, Height = 140–150 mm The pallets are picked up on the 120 cm sides and positioned lengthwise on the conveying surface. When arranged in a row, the 7 machine segments measure 12 m in total. The machine segments can be freely positioned and aligned. Some clearance can also be allowed during installation, estimated at a maximum of 200 mm between each unit, to prevent pallets from tipping over when loaded on one side. In this case, the system can be extended up to 13.2 m. Collection only. Price: On request We look forward to your offer.

Condition: new, Year of construction: 2022, Model DPL-1530HP-4 kW 8 levels 3000x1500mm (300kg load per level) Loading and unloading system Laser Raycus 4 kW Control system FSCUT 2000ER Laser head Raytools BM115 autofocus Cooler Hanli 3.8 kW Air blower 11kW Nesting software Cypnest-Nesting software Bodpeci Ik Ssfx Alcelh Low pressure gas alarm gas pressure monitor and SW control Voltage stabilizer 48-72 KVA Laser class 4 enclosure Heavy duty machine base. High power servo motors. Intelligent cutting control system, easy operation Fast tacking, supported by segment and step tacking technology. Specialized air duct with oversized caliber, makes the smoke exhaust smooth. Completely enclosed construction European CE standard Dual shuttle tables provide a high level of safety and convenience. Positioning accuracy ±0.05/1000mm Repeat positioning accuracy ±0.03/1000mm Acceleration 1.6 m/s² Max. Speed 120 m/min Sheet loading 1500Kg Size 8907×2813×2658 mm Laser power 6000 W Control system FSCUT 2000 machine power 32-48 kW Voltage 380V/50Hz Delivery time 5 months (construction time + transport) delivery to customer's yard 3.500€ Installation and training 8.850 € Industry 4.0 software 9.500 € FILTERCUBE 2H, 4,0 kW, 40 m² 10.500,- € The Filtercube series is an extraction system equipped with filter cartridges, in the field of smoke filtration and dusts.

Condition: new, Year of construction: 2024, Laser source: 12 kW Raycus/IPG Laser head: Precitec Pro-Cutter 2.0 Control system: FSCUT 8000 Effective working area: 1520x3050 mm Max. Positioning speed: 120 m/min Bledpfji Ar Rusx Alceh Max. Acceleration: 1,5 m/s² Positioning accuracy: 0,02 mm/m Repeatability: 0.03 mm/m Max. Table load: 1500 kg

Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, Wet waste press press container Bergmann MPB405 SN/10 for skip loader 10cbm usable volume tested, serviced, fully functional Painting in desired RAL color possible We would be happy to make you an offer including delivery. Bljdpfx Alevmwpwoceh

Year of construction: 2015, operating hours: 8,286 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: Drymex S 5, Beautiful, robust drying system consisting of 2 units, 1 large stainless steel drying chamber with perforated floor, including piping and the Blue Evolution XL steam cleaning device from Beam. Ideal for gentle drying of food products (herbs, tea, wheatgrass), low-temperature drying with electricity (below 40°C), permitted for indoor use only. The individual segments of the perforated floor can be lifted up separately for cleaning. Excellent condition, very solid construction. Dimensions: Units – 1.95 x 1.25 x 2.00 m, Drying chamber: 7.40 x 2.67 x 2.50 m. Stainless steel: 1.4301. Unit 1: Year of manufacture 2012, Unit 2: Year of manufacture 2014, Drying chamber: Year of manufacture 2015. Price negotiable. Bedpfeyffqqex Alcjlh

Year of construction: 2018, condition: ready for operation (used), Suitable for grinding calcined coke, feed material diameter: 0-20mm, moisture feed material: under 0.1%, measurement: NEA Malvern analysis, with pendulum mill, automatic filling station, BigBag unloading station, dust filter, pipe chain conveyor, transition piece, metal separator, bunker, two-way distributor, dosing sluice, control cabinets, steel construction, documentation and additional elements, the system is still in its original packaging and has been stored for two years. Bljdpjnxk Ixsfx Alceh

Condition: used, functionality: fully functional, machine/vehicle number: 82415, type of input current: three-phase, total width: 1,500 mm, total length: 2,500 mm, input voltage: 400 V, input current: 16 A, cutting height (max.): 100 mm, 114 A – BERGMAN & JOHANSSON 420 Bandknife Fabric Cutting Machine – Industrial Precision Cutting Unit Description For sale is a Bergman & Johansson industrial bandknife fabric cutting machine, model Type 420, manufactured in Sweden. This machine is designed for high-precision cutting of stacked textile materials using a continuous vertical bandknife system. It is a core component in professional garment cutting rooms, especially suited for detailed shaping of components such as collars, sleeves, and smaller pattern pieces. The system has been used as part of a dedicated cutting workflow together with Finn-Convey spreading tables (unit 22 C), enabling efficient transition from fabric spreading to precision cutting. The long-arm C-frame construction allows handling of large fabric stacks, while maintaining excellent control and cutting accuracy. The machine was in production use prior to factory shutdown and has been serviced on 27.02.2026. Technical Details • Manufacturer: Bergman & Johansson i Borås AB, Sweden • Model: Type 420 • Band length: approx. 4200 mm • Serial number: 82415 • Machine type: Industrial bandknife fabric cutting machine Motor Specifications • Manufacturer: Leroy-Somer • Type: LS 80 P • Power: 0.75 kW • Speed: approx. 1410 rpm • Voltage: 380–400 V (3-phase, star connection) • Current: approx. 2.0 A (Y) / 3.45 A (Δ) • Frequency: 50 Hz • Protection class: IP54 Machine Features • Continuous vertical bandknife for precision cutting • Long-arm (C-frame) design for large cutting areas • Integrated cutting table with smooth surface • Adjustable blade guard for safety and accuracy • Built-in sharpening system for continuous blade maintenance • Heavy-duty industrial construction • Mobile base with wheels for flexible positioning Cutting Capabilities • High-precision cutting of multi-layer fabric stacks • Suitable for both straight and complex contour cutting • Ideal for detailed garment components and templates • Clean and accurate cuts across various textile types System Characteristics • Table-based cutting process, material is guided manually • Optional air table functionality (depending on configuration) to reduce friction • Stable blade tracking and tension system for consistent performance • Designed for continuous industrial operation Condition Used industrial condition Serviced on 27.02.2026 Machine was operational prior to factory shutdown Bjdpey Au Hqefx Alcslh Typical wear consistent with industrial use Inspection possible prior to dismantling Sold as-is, where-is, without warranty Applications • Precision cutting of fabric stacks • Garment component cutting • Denim and workwear production • Textile cutting rooms • Small to mid-scale production setups Location Valga, Estonia Dismantling & Transport Buyer responsible for dismantling and transport Professional dismantling recommended

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: DMG3 size 22, overall weight: 31,100 kg, gear ratio: 6.943, Main gearbox FLENDER, DMG3 size 22 i = 6.943 PM = 4,000 kW n1 = 993 rpm n2 = 143 rpm Number of ring gear teeth = 292 Mill speed = 15.1 rpm Operating factor to ISO 6336 = 2.3 Shaft d1 (left): Ø 170 n6 x 250 mm long G1 = 790 mm with 2 keys according to DIN 6885-1 Shaft d1 (right): Ø 170 n6 x 250 mm long G1 = 790 mm with 2 keys according to DIN 6885-1 Sealing for both d1 shafts with labyrinth seal Cooling and pressure lubrication with external oil cooler OWTS 10 (not included) Shaft d1 left – fitted with part 2 of UZWN 460 coupling Shaft d1 right – fitted with part 2 of RWN 800 coupling No oil supplied Including: Bljdpfsyuct Uex Alcoh - Lubrication system OWTS 10 - Pipework - Main input coupling RUPEX RWN 800 - Set of liners with alignment tools - Set of foundation bolts - Auxiliary gearbox FLENDER H3 SH size 11 - Auxiliary motor tbd225M - Auxiliary input coupling FLUDEX FAR 395x224 - Auxiliary output coupling UZWN kompakt 460 - V-belt pulley - V-belts - Centrifugal brake FB 2x208 - Brake drum TE - Holding brake TE 315/800/60 - Base frame - Pretensioning tool

Condition: excellent (used), Year of construction: 2016, Type BAFAG ATU 25 Blodjuvg Dxopfx Alcoh Power 2 kW Material conveyor Labotek Power 1.1 kW