Used Pfeiffer Pfeiffer Tph 2200 Mit Steuerung. for sale (8,733)

Condition: ready for operation (used), Tool spindle housing with Widaflex UT50 264.82.905 7H N-263.66.251 spindle, hole spacing of the fastening holes on the housing: 185 x 200 mm, hole spacing of the fastening holes on the drive side: 151 x x155 mm, Ø holder for drive: 32 mm, used, normal signs of wear, 100% functional ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please inquire for charges for packing and transport separately! Fedpfx Aioz Admwsvjpn

Condition: ready for operation (used), Weidmüller ICD06 control panel with 3.5" floppy disk drive, used, good condition, 100% functional Fjdpfx Ajz Adkieivspn

Condition: ready for operation (used), You are bidding on a Heidenhain inverter UV 101B, part no. 317 559-13, SN: 10084979, offered in exchange (exchange service). The unit has been professionally overhauled and fully tested, with a 3-month warranty and is 100% functional. Scope of delivery as shown in the photos. Please note: In the exchange process, your defective return part must not show any mechanical damage, such as breakages, as these are not repairable. If such damage is present, an additional charge of €400 incl. VAT will apply. Fpsdpfxez Ddt De Aivjn

Condition: ready for operation (used), Heidenhain UVR 140D, ID: 390 281-01, serial number: 16412040T – complete overhaul and testing performed by qualified personnel, including test report. Comes with a 3-month warranty and is 100% functional. Scope of delivery as shown in the photos. Fpjdpfx Aez A N A Isivsn

Condition: ready for operation (used), Sensor cable/interface cable, length 1.8 m, with 2 Honda MR-20L 20-pin connectors for Fanuc, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Fedsz Dnybopfx Aivspn

Condition: used, Year of construction: 2021, operating hours: 5,300 h, Tracked excavator CAT 352-07 The machine has only 5,300 operating hours and is in good condition Operating weight approx. 52,800 kg Fjdpfez D R Egex Aivepn

Condition: used, Year of construction: 2017, Technical details: operating pressure: 12 bar container volume: 200 l Total weight, approx.: 220 kg dimensions L x W x H: 1,2 x 1,1 x 1,8 m Mobile pressure blasting pot - Sand blasting system Blasting tank pressure up to 12 bar Test pressure 17.2 bar Ideally equipped with: Fpjdpfxevvvrps Aivsn -with remote control valve -with remote control lever -with electro-pneumatic remote control -with carbide spray nozzle incl. 10 m nozzle hose i.D. *

Condition: used, empty load weight: 5,070 kg, maximum load weight: 35,930 kg, overall weight: 41,000 kg, axle configuration: 3 axles, first registration: 03/2015, next inspection (TÜV): 09/2027, total length: 24,800 mm, total width: 12,510 mm, total height: 126,400 mm, suspension: air, tire size: 385/55 R 22.5, color: blue, Year of construction: 2015, front tire size: 385/55 R 22.5, rear tire size: 385/55 R 22.5, emission class: none, Axle manufacturer BPW Eco Plus with disc brakes, air suspension with lift function, raising and lowering capability, lift axle on the first axle, pneumatic rear extension (fixed and no longer extendable), Thermo King generator set (defective, engine runs, generator winding defective, cooler leaking, engine mount rusted through), modulator is defective (significant air loss). Fjdpfoz D I N Nsx Aivopn

Condition: new, maximum load weight: 30,160 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory with immediately and shortly available vehicles on our website. The following is an excerpt of the equipment. Complete equipment available upon request. Frame: Steel welded construction with a front frame bend, front corners chamfered and a chamfer at the rear. Access ramp with excavator bucket recess in the center = a recess at the rear between the longitudinal beams, approx. 2,300 mm long, integrated into the outer frame. - 4 pairs of approx. 4-tonne lashing points - 7 pairs of recessed, retractable approx. 10-tonne lashing rings (2 x on the raised platform, 1 x in the front bend slope, 3 x in the low bed between the wheel wells, and 1 x in the access ramp) - 2 pairs of wheel wells - 1 pair of wheel wells, approx. 2,300/1,270 x 400 mm (L1/L2 x W), in front of the bend, including a one-piece, drive-over aluminum cover, for a maximum surface load of approx. 11,650 daN/piece. - 1 pair of wheel wells, approx. 1,390/590 x 270 mm (L1/L2 x W), between the 3rd and 4th axles, including a one-piece, drive-over aluminum cover, suitable for the transport of wheel loaders with a wheelbase of approx. 2,700-3,600 mm, with wheel diameters of approx. 1,485-1,740 mm, maximum rear overhang of the wheel loader of 2,220 mm. - Width between the wheel wells approx. 1,255 mm (= outer/outer longitudinal beam) Frame attachments: - 5 pairs of mounting pockets in the outer frame for rectangular tube supports, approx. 100x50x5 mm (3 x in the low bed and 2 x on the raised platform). - Without rectangular tube supports. - On both sides of the low bed platform, retractable widening extensions with softwood planks approx. 50 mm (the track width of the construction machines to be transported must not exceed the outer frame width of approx. 2,550 mm). - 4 pairs of folding approx. 10-tonne lashing rings, arrangement: 1 pair at the front of the raised platform, inside the longitudinal beams; 1 pair at the very rear in the excavator bucket recess, left and right; 1 pair at the front of the raised platform, in front of the bend, inside the longitudinal beams; 1 pair in the low bed at the rear in front of the access ramp, in the excavator bucket recess, left and right. Towing device: - Fixed drawbar with approx. 50 mm heavy-duty towing eye, bent design, silent block bearing, drawbar locking spring with tensioner. - Truck coupling height from approx. 820 mm to approx. 1,010 mm. - Drawbar length approx. 1,800 mm. Support system: - 2 hydraulic supports at the rear, to be operated individually, control unit housed in a separate stainless steel box. Axles: - SAF air suspension low loader axles with drum brakes, load capacity approx. 11 tonnes/axle, S-cam brake approx. 300/200 mm, automatic brake linkage adjustment. Wheels: - 16 wheels, tires 245/70 R 17.5, 146/146F, manufacturer Conti HTR2 (tire load capacity approx. 12 tonnes/axle). Braking system/suspension: - Braking system according to ECE regulation R13, two-line pneumatic braking system. - Braking system manufacturer Wabco EBS system 4S3M, 1st and 3rd axles sensed, RSS/RSP stability program, spring brake parking brake on 3rd and 4th axles. - Aluminum air reservoirs for a total weight of 44 tonnes. - Brake/air connection lines with 2 individual coupling heads, yellow/red. - EBS/ABS connection cable. Fpedoz Ed Azjpfx Aivon - Rubber strap as a holder for EBS and electrical plugs. - Air suspension with lifting and lowering device, to be operated separately at the front and rear. - Automatic adjustmen

Condition: reconditioned (used), Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ----- This machine is currently being refurbished at our facility! Pictures taken before dismantling and currently during the processing phase! Brief Summary: ----- - 5 spindles with 8,000 rpm - 4 x HSK/Powerlock - Axially and radial CNC adjustments of the spindles via control - CNC-controlled adjustment and positioning of the feed - Table tops with guide blades at spindles 2 and 3. - Includes Weinig/Neumann RF 15 return conveyor system Detailed Description: ----- Technical Data: Working width: 20-230 mm Working height: 8-120 mm 1st tool holder - bottom ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 145 mm Axially travel: 5 mm Folding device MarathonCoatin for table insert in front of 1st lower Tool Holder 2nd Tool Holder - PowerLock - Right ----- Motor with brake: 7.5 kW Shared motor with left tool holder Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind stop plane: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle: CNC controlled axially Table tops with guide blades 3rd Tool Holder - PowerLock - Left ----- Motor with brake: Shared motor with the 2nd spindle Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 180 mm Table surface: 93 - 200 mm Tool swing diameter 55 mm below table surface: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle axially and radially CNC controlled Table tops with guide blades 4. Tool holder - PowerLock - top ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Axially travel: 40 mm Split pressure shoe in front of upper tool holder, adjustable and pivoting away from the tool, spring-loaded. Pressure shoe in front of, and discharge after, the upper tool holder with electronic digital displays, integrated into memory functions CNC-controlled radial spindle 5. Tool holder - PowerLock - bottom ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Max. throat depth: 15 mm Fpodpfxoyy A Iqe Aiven Axially travel: 35 mm Feed system ----- Frequency-controlled feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers (Weinig patent) wi...

Condition: excellent (used), mileage: 804,945 km, power: 338 kW (459.55 HP), first registration: 01/2012, fuel type: diesel, axle configuration: 8x4, wheelbase: 7,650 mm, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, number of seats: 2, total length: 10,100 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,500 kg, permissible axle load (axle 3): 9,500 kg, Year of construction: 2012, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, electric window regulation, power mirror, trailer coupling, = Additional options and accessories = - Aluminum fuel tank - Beacon(s) - Gullet - High Beams - Lift Axle - PTO - Radio/CD player - Rotator - Sleeping cabin - Steering Axle Fpjdpjz Dpvqofx Aivsn - Sun visor - Toolbox = Remarks = Crane Number of hydraulic extensions: 3 Number of support legs: 2 Remote control: ✓ Load Hook: ✓ Rotator: ✓ = More information = General information Number of doors: 2 Cab: single Registration number: BZ-SJ-12 Technical information Number of cylinders: 6 Engine capacity: 12.780 cc Axle configuration Front axle: Max. axle load: 9000 kg; Steering Rear axle 1: Max. axle load: 9500 kg Rear axle 2: Max. axle load: 9500 kg Rear axle 3: Lift axle; Max. axle load: 7500 kg; Steering Weights Empty weight: 17.000 kg Carrying capacity: 18.600 kg GVW: 35.500 kg Max. towing weight: 50.000 kg Functional Crane: HMF 2200-K3, year of manufacture 2011, behind the cab Extendable superstructure: Yes Tipper: Back Layout Number of beds: 1 Maintenance, history and condition APK (MOT): tested until 02/2027 Technical condition: very good Visual appearance: very good Financial information Price: On request = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: new, color: grey, Year of construction: 2026, Get your street food business up and running right away, or customize your stand to your liking: We offer high-quality, brand-new catering containers made from robust, thermally insulated aluminum-fiberglass construction. Excellent insulation ensures a perfect working environment in every season. Free delivery to the curb included! 💳 Rent-to-own & Leasing: Flexible financing options available! Fjdpoz Hmnpefx Aivspn 🛡️ Safety & Warranty: 1-year warranty on the structure and catering kitchen. 🛠️ INDIVIDUAL CUSTOMIZATIONS POSSIBLE! Do you need a different length, more payload, or specific equipment? We can also modify this model exactly to your specifications! Dimensions: Internal length: 5,898 mm Internal width: 2,352 mm Internal headroom: 2,385 mm CHOOSE YOUR OPTION Option 1: CONTAINER EMPTY (Ideal for self-build) Price: €25,000 plus VAT Equipment: Includes water system opening, fuse box, 2 service hatches, and LED ceiling lighting. Warranty: 1-year warranty on the structure and electrical system. Option 2: FULL CATERING EQUIPMENT (Ready to use immediately) Price: €39,500 plus VAT Container 2: fully equipped with catering equipment - ready for immediate use, perfect for street food. Price with the equipment described below: €39,500.00 net. Catering equipment; stainless steel kitchen 🔥 Professional gas appliances (brand: Bertos): Gas stove "Bertos" with 2 burners, dimensions (W x D x H) 300 x 600 x 290, power: 6.2 kW, made of stainless steel, G6F2B Gas grill "Bertos", smooth plate, dimensions (W x D x H) 600 x 600 x 290, power: 8 kW, made of stainless steel, G6FL6B Gas fryer "Bertos", 2 x 8 liter tank capacity, dimensions (W x D x H) 600 x 600 x 290, power: 13.2 kW, made of stainless steel, with drain valve, GL8+8B Gas cabinet for 3 x 11 liter propane gas cylinders ❄️ Cooling & Hygiene: Under-counter refrigerator "Liebherr" Combination refrigerator Liebherr 💧 Water system Water system with water canisters, 30-liter capacity with fresh and wastewater canisters Two stainless steel sinks with faucet Hygiene package including folding towel dispenser and soap dispenser 10-liter water heater Pump ⚡ Lighting, Safety: LED lighting on the ceiling LED lighting with color changing effect around the service hatch with remote control Emergency light ✨ Extras: Serving area and work surface made of brushed stainless steel Two service hatches Insulated wall at the cooking area (fireproof) Exhaust hood with labyrinth filters Non-slip floor for catering Splash guard optional Entry through a side door Generator cabinet Visit us on-site and see for yourself the quality of workmanship of our vehicles!

Condition: used, mileage: 218,093 km, power: 346 kW (470.43 HP), first registration: 12/2020, fuel type: diesel, empty load weight: 11,560 kg, maximum load weight: 14,440 kg, overall weight: 26,000 kg, tire size: 315/60 R22,5, axle configuration: 3 axles, wheelbase: 1 mm, next inspection (TÜV): 11/2026, fuel consumption (urban): 968 l/100km, color: black, driver cabin: day cab, gearing type: automatic, suspension: air, number of seats: 2, total length: 9,680 mm, loading space volume: 37 m³, loading space length: 7,450 mm, loading space width: 2,440 mm, loading space height: 2,060 mm, lifting height: 2,300 mm, Equipment: tail-lift, Color: black, unladen weight: 11,560 kg, permissible total weight: 26,000 kg, cargo space (L W H): 7,450 mm x 2,440 mm x 2,060 mm, tire size: 315/60 R22.5, cargo space volume: 37 m³, 1st axle: , 2nd axle: , 3rd axle: , interior color: gray, air suspension, rear liftgate: aluminum, BÄ TYPBC 2500, ORTEN swivel wall, beverage body, rear liftgate BÄR TYPE BC 2500, dimensions: L 7,450 mm, W 2,450 mm, H 2,060 mm + tandem trailer, chassis no. 0004481, order UVH 260321, total price €70,000 + VAT, non-binding offer, subject to errors and prior sale. The image may not match the offer. Fpedjz Ht Ddjpfx Aivsn

Condition: good (used), axle configuration: 3 axles, first registration: 07/2018, suspension: air, color: blue, Year of construction: 2018, Equipment: ABS, tail-lift, = Additional Options and Accessories = - EBS - Air suspension = Further Information = Axle Configuration Suspension: Air suspension Rear axle 1: Steerable Rear axle 2: Steerable Rear axle 3: Steerable Weights Unladen weight: 14,300 kg Payload: 32,700 kg GVW: 47,000 kg Maintenance, History, and Condition APK (Technical Main Inspection): Valid until 03/2027 Technical condition: good Fpsdpfx Aoz Hq Rzoiven Visual condition: good Vehicle number: Low-loader: 05 Goldhofer MPA 3 / 3-axle PBW, steerable / With remote control / Extendable .: WG0MPA037J0039094 TÜV: 03/2027 - Inspection: 09/2026 PBW 3 x steerable axles Hydraulic ramps Remote control Unladen weight: 14,300 Total weight: 47,000 Length: 8.90 m, with extension 12.00 m, total extended length 15.40 m Width: 2.54 m No liability for printing and typographical errors, changes, sales subject to prior sale, and errors. = Company Information = No liability for printing and typographical errors, changes, sales subject to prior sale, and errors. Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email:

Condition: reconditioned (used), Awl grinding machine Manufacturer: harich (Deckel) Model: SSMplus (S0E) Refurbished, with CE marking Includes warranty Equipment: Fsdjz Hy E Iopfx Aivepn - Machine stand - Integrated dust extraction - Grinding wheel with flange - Dressing tool - New machine electrical system in accordance with current safety regulations - Documentation for the machine and control cabinet in printed form, consisting of: - Operating manual - Wiring diagram - CE declaration of conformity Additionally equipped with safety measures in accordance with standard EN 60204-1, consisting of: - Control cabinet with main switch, power supply, contactors, motor protection, safety switching devices - Emergency stop mushroom button instead of the main switch on the machine - Green button for turning the machine on (illuminated) - Red button for turning the machine off - LED status indicator in the form of the harich logo: - Blue for machine on - Green for grinding spindle on

Condition: used, including speed regulator and a foot. Without belt. 0,75     Kw Fpsdpfx Aoz Ibyioivjn

Condition: used, overall weight: 2,000 kg, first registration: 05/2007, Blomer 2-horse trailer with tack room, Gross weight: 2,000 kg Tack room, aluminium floor, and much more. Subject to errors and changes. * NET SALE POSSIBLE * TOP leasing offer available * IMMEDIATELY AVAILABLE Location and viewing of our vehicles: STX HORSETRUCKS GERMANY Hamburgerstrasse 61 23816 Leezen Sale and service of all makes Fpodpfey Hnqwsx Aivon in the field of horse trucks and trailers. Please arrange an appointment in advance with Richard Theurer Andreas Theurer

Condition: new, mileage: 10 km, power: 125 kW (169.95 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, number of seats: 3, loading space length: 4,200 mm, loading space width: 2,100 mm, loading space height: 2,200 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, * Vehicle: * Renault Master, New Model * Premium body, integral box, extra low! * Ferrofoam 25mm walls and 40mm portal doors * Automatic climate control * DAB radio with Bluetooth * OpenR Link 10'' multimedia system * Google Maps navigation system possible with: * Apple CarPlay * Android Auto * QI wireless charging pad * RCall * Rear parking sensors * Rear view camera * Driver fatigue warning system * Traffic sign recognition system * Crosswind assist * Light sensor * Rain sensor * Lane keeping assist * Emergency braking assist * ABS, ESP * 80-liter fuel tank * Extra-long and electrically adjustable exterior mirrors * 3D roof spoiler and side spoilers * On-board computer * Start/Stop function * Mud flaps * Diesel particulate filter (EURO 6E) * Driver airbag * Multifunction steering wheel * Power steering * Cup holders * Electric windows * On-board computer * Seats: Fabric * Central locking with remote control * Interior lighting * Interior lighting * Side marker lights in LED * LED daytime running lights * LED low beam headlights * Fog lights * LED lighting in the container/switch in the cab * Rear parking assist PDC * Body: * Premium box / furniture box, extra low * Combination anchor rail as desired (quantity and height) * Rear step, Thule Fpsdjyiirwspfx Aivon * Toolbox * Integrated airline rail in the floor * Lighting in the box * Portal doors lockable * Fixed roof * Internal dimensions of the box in mm L/W/H 4200x2100x2200 If the vehicle is not in stock, short delivery time is possible! * Ask us about an individual leasing or financing offer. * Net export possible * Delivery from 199¤ Didn't find the right vehicle? Configure your own vehicle! Whether it's equipment, body, or engine variant. All at a fair price! You can also purchase only the bodies for your existing vehicle from us! Don't hesitate to contact us! * Images may show optional equipment that is not included in the basic price. ?----?The information provided on the internet is a non-binding description. It does not represent guaranteed characteristics. The seller is not liable for typographical and data transmission errors / changes / input errors. Please check the accuracy of the equipment features directly on the vehicle before purchasing. Errors and prior sale reserved. This advertisement is to be understood as an invitation to submit an offer.

Condition: used, Krauss Maffei IPC 5-133 for MC4 control system- removed from KM not testedmanufacturer: Krauss Maffei spare part no.: 5 Fpodpforr Egwjx Aivon Dition: gebraucht

Condition: new, Year of construction: 2026, color: black, overall weight: 15,000 kg, loading space volume: 14 m³, loading space width: 2,300 mm, loading space length: 6,000 mm, loading space height: 1,050 mm, gearing type: other, driver cabin: other, Vehicle location: en route / in transit, steel body, flap, lashing eyes Body: Roll-off container with double-wing door / swing flap, approx. 14.5 m³, ARCHIVE IMAGES Roll-off container approx. 14.5 m³? with smooth bottom (4 mm, RAL 7016): Fjdpfx Aez Nqqbeivepn - Internal length / internal dimensions 6000 mm - Internal width / internal dimensions 2300 mm - Internal height / internal dimensions 1050 mm - Smooth bottom (4 mm) - Walls and doors (3 mm) - Supports and frame made of closed profile, approx. 600 mm + support struts / supports and arms made of closed profile, approx. 600 mm - Hook height 1570 mm S355 Q50 - Door system L+R / door system 2-in-1 - system with 2 double rollers + swing flaps - 2 rollers / 2 rollers Q160/300 mm - Polyurethane paint / RAL color sample - Wall and hook skids with cover All information is without guarantee, as the vehicle is en route! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Video available at: Base machine - Dynestic 7535-R Automatic 12.7 Dynestic table For classic nesting machining with wear plate Machining length: 3700 mm Working direction: from right to left Machine frame in welded construction with ground and hardened prism guides for the traversing carriage, aggregate head and consoles Traversing carriage in gantry design Rack and pinion drive, helical, in X and Y direction, Ball screw spindles Z-axis for precise positioning Technical data: Machining dimensions: Max. load on nesting table X = 3700 mm Y = 2200 mm Max. travel distances X = 5295 mm Y = 2935 mm Z = 565 mm Max. clearance height DYNESTIC table Z = 250 mm from the top of the table (without wear plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and viewing window Voltage 400 V, 50/60 Hz CONTROL: Dual-core processor Operating system: Windows XP 80 GB hard drive / 1 GB RAM RJ45 network connection 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD burner) Fpjdpfx Aezt Twysivsn Remote maintenance Integrated network card for data transmission of control and program data. Data transmission via high-speed internet connection Requirement: High-speed internet connection to the machine. DYNESTIC table Solid, continuous machining table with grid spacing, continuous grooves in X and Y direction, Groove spacing: 50 mm with 25 meters of sealing cord for securing the wear plate 1 machining field with stop strips / stop Height: 30 mm, pneumatically lowerable 2 stop strips in Y direction and 1 stop in X direction on the right (when viewed from the front of the machine) Vacuum fields 1-circuit vacuum system Drilling unit 7881-R, 24 spindles Drive power 3.0 kW, incl. saw unit 18 vertical spindles individually selectable Arrangement in L-shape, 11+2 in X and 6 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: alternating clockwise / counterclockwise n(max.) 1000 - 5710 min-1, infinitely variable Mount: M 10 thread - clearance fit 11 mm without tool, without mount 6 horizontal spindles 2 twin drill spindles in X direction (distance 32 mm between 1st and 2nd horizontal drill spindle) 1 twin drill spindle in Y direction Mount: M 10 thread, clearance fit 11 mm Total drill length max. 70 mm from the mounting end without tool, without mount Pressure booster, increases the standard pressure from 6 to 8 bar 5-axis milling unit 7844, Power: 10.0 kW (S6) cardanic, C-axis rotatable +/- 360°, A-axis rotatable +/- 180° n(max.) = 0 - 24000 min-1, infinitely variable, max. power at 12000 min-1 to 24000 min-1 Liquid cooling (cooling unit included) with HSK-F 63 tool holder with right-hand thread (for right-hand cutting tools) with collet chuck with HSK shank Ceramic ball bearings (hybrid bearings) Tool weight max. 6 kg (incl. holder) Tools:

Condition: ready for operation (used), Bosch UFV 160M / 4B-21S / 739 / 342776-1 servomotor, UVF 160M / 4B-21S / 739 / 342776-1 / 107-914867, professionally and completely overhauled and tested, with a 12-month warranty, 100% functional. Scope of delivery as shown in the photos. The agreed sales discounts do not apply to this item. Please request the price separately! ATTENTION: Please enquire for charges for packing and transport separately! Fpjdpji D Hg Aofx Aivsn

Condition: ready for operation (used), Bosch UVF 160M / 4B-21S / Servomotor, 104-914867, professionally and completely overhauled and tested, with a 12-month warranty, 100% functional. Scope of delivery as shown in the photos. The agreed-upon sales discounts do not apply to this item. Please request the price separately! ATTENTION: Please enquire separately about the costs for packaging and shipping! Fpjdpfx Aei D Hhrsivsn

Condition: ready for operation (used), Bosch UVF 160M / 4B-21S /527 / 55432-1 servomotor, professionally and completely overhauled and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. Agreed sales discounts do not apply to this item. Please request the price separately! ATTENTION: Please enquire separately about the costs for packaging and shipping! Fjdpfx Aiek Ru Dcsvjpn

Condition: ready for operation (used), Allen Bradley 1326AB-B530E-21 Servomotor Series C SN:R517258 , professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos, The agreed sales discounts do not apply to this item. Please ask for price separately! Fjdpjtkgn Esfx Aivjpn