Used Mk Guf-P 2041 Af/11313/700 for sale (48,087)

Condition: excellent (used), Year of construction: 1980, Gurutzpe Super BT lathe 700 x 6000 mm e.p, turning over bed 1380mm, over cross slide 1045mm, over neck 1770mm, neck length before plate 620mm, diameter of the spindle bore 102 mm , speeds 2.8-400rpm, 40cv motor, plate of 4 independent jaws with a diameter of 1200mm, with a fixed steady rest and a mobile one, bed width 800 mm, diameter of the tailstock axis 140mm, max weight on lathes between points 10tns with a steady rest 12tns, estimated weight of the lathe 17600kg, pre-owned lathe electrical panel in very good condition condition Fgedpjiqyv Iefx Aa Esf

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Fgodpfx Aaoua Tbws Eef Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: reconditioned (used), Year of construction: 2006, BACCIOTTINI Group Pit Stop AF Speed, year 2006: automatic creasing and perforating machine in excellent condition. Fgjdpfx Aoyk Utxsa Eef The machine will be overhauled at Bacciottini Group srl's facilities. Robust construction and reliable performance. The machine is equipped with a NEW standard V-Shape creasing kit and a 100 cm extension. All other optional tools currently available can be added: digital creasing kit, standard perforating kit (2/1, 3/1, 4/1), or micro-perforation kit. Technical specifications: - Maximum format: 50 x 70 cm (50 x 100 cm with extension) - Minimum format: 8 x 15 cm - Paper weight: from 80 to 600 gsm - Minimum creasing distance: 0.1 mm - Programming: 200 programs with 100 creases per program - Power supply: 400 Volt three-phase 50 Hz - Power requirement: 3.5 kW This has been our best-selling model for years and continues to be appreciated worldwide for its quality and reliability. The attached photos are from our catalogue and do not specifically refer to the machine being offered.

Condition: used, Year of construction: 2009, operating hours: 1,234 h, functionality: fully functional, machine/vehicle number: ABC123, input voltage: 400 V, year of last overhaul: 2025, total length: 4,000 mm, total width: 2,000 mm, total height: 2,000 mm, input frequency: 50 Hz, overall weight: 15,000 kg, control cabinet width: 6,000 mm, control cabinet length: 400 mm, control cabinet height: 800 mm, For sale: professional Diosna DSP 300 AF industrial dough mixer, manufactured in Germany and in excellent working condition. This is a high-capacity mixer designed for industrial bakeries and large-scale dough production. The mixer is located in Romania, Arad County, Pâncota, at Nicola SABB Bakery, where it can be seen in operation. More details are available by phone or WhatsApp. Videos of the mixer in operation can also be provided upon request. Main Features • Mixing capacity: up to approx. 300 kg dough / 180–190 kg flour • Type: Double-spiral mixer with 6 removable bowls • Digital control panel with program management • Two mixing speeds: slow and fast • Manufactured in Germany (DIOSNA – Dierks & Söhne GmbH) • Very quiet and stable, equipped with safety cover sensor and automatic stop • Power supply: 400 V / 50 Hz / three-phase • Total power: 49 kW • Year of manufacture: 2009 Technical Condition Fjdpex Ta U Uofx Aa Ejgf Fully operational and currently in use for bread and bakery production. Owned and operated by our bakery since new (2009).

Condition: ready for operation (used), 6230 - ITALPRESS Bandsaw - Motor Power: 3 kW - Table Length: 103 cm - Table Width: 71 cm - Maximum Cutting Height: 3200 mm - Maximum Cutting Width: 6700 mm - Wheel Diameter: 700 mm - Manual Brake - Maximum Blade Length: 5020 mm - Minimum Blade Length: 4920 mm Fodpfxou Up S Uj Aa Esgf - Star-Delta Start - Manually Adjustable Fence - Voltage: 380 V - Dimensions: Width 1400 mm, Length 800 mm, Height 2200 mm

Condition: used, Technical data: Max. cutting height: 340 mm Max. cutting width: 680 mm Wheel diameter: 700 mm Blade adjustment range: 4870–4970 mm Max. blade width: 40 mm Min. blade width: 20 mm Worktable dimensions: 650x700 mm Worktable tilt: Extraction port diameter: Motor power: 2.2 kW Voltage: 400 V Brake Fgsdsyhnlcjpfx Aa Esf Emergency stop switch Manufacturer: Centauro Overall dimensions: Length: 830 mm Width: 1200 mm Height: 2230 mm

Condition: used, Year of construction: 2019, MAXIMUM CHIPPER DIAMETER: 250 MM ENGINE POWER: 75 kW GRINDING DRUM WIDTH: 640 MM GRINDING ROLLER DIAMETER: 660 MM UPPER ROLLER WIDTH: 640 MM MAXIMUM OPENING OF UPPER ROLLER: 600 MM KNIVES ON MACHINE: 3 Fgedpfsyffi Tjx Aa Esf FEED ROLLERS: 2

Year of construction: 2026, condition: new, Specifications: - Performance: 700 L/h (From 20°C to 80°C) - Electric demands: 1 kW, 230 V, 6 A, monophase - Heat performance: 80kW (diesel burner) Fjdpfxsfhb Ite Aa Ejgf - Fuel: diesel fuel - Fuel consumption: 7,5 L/h - Flue gas outlet: 110mm chimney - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 750x1700x1170 mm - Weight: 380 kg - IP65 certified electronics - Heat exchanger: soft water - Connections: DN 25 - Thermometers: 2 pcs - With automatic by-pass valve - Automatic heat control, very easy to clean - Automatic operation - flowthrough type - With 4pcs vibration-free feet - It requires minimal maintenance Available options: Two filler superstructure: BB top 180 semi-automatic BiB filler, 6 head bottle filler, puffer tank with level switches

Year of construction: 2026, condition: new, MSP 700 Belt Filter Press The complete unit can be disassembled down to the base frame in just a few minutes! Fgodsrz I Dkspfx Aa Ejf Fully automatic fruit and vegetable press with a closed working chamber to minimize oxidation. Two high-pressure nozzles are mounted under the machine, continuously rotating to ensure optimal performance. Thanks to the minimal gap between the pressing rollers and the juice collection tray, foam formation is no longer an issue. Most parts of the machine can be disassembled without tools, making cleaning easy. Equipped with heavy-duty vibration-damping machine feet. Requires only minimal maintenance. Technical data: - Capacity: 700 kg/hour - Electrical requirement: 1.5 kW, 400 V, 16 A - Material: Wnr. 1.4301, AISI 304 stainless steel - Dimensions: 2200x1300x1200 mm - Feed height: 1200 mm - Wastewater connection: 40 mm - Dry goods discharge height: 470/770 mm - Weight: 890 kg - With integrated juice pump, collection tank, and level switch - With touchscreen control - IP65-rated electronics - Extra high juice yield: 75% (depending on freshness and quality of the produce) - Air consumption: 50 l/hour at 6 bar - High-pressure water requirement: 360 l/h - Frequency inverter: Speed control for even more professional processing - High-strength, food-grade polyester press belt, fiber thickness: 2 mm, fabric density 6×16 fibers/cm², ½ weave (suitable for juicing without large fibers) - Easy to clean - Requires minimal maintenance - Adjustable, with vibration-damping machine feet - Rotating brush roller for belt cleaning A high-pressure cleaner and air compressor are required for operation.

Year of construction: 1994, condition: used, functionality: fully functional, Perfectly functioning EDM machine AGIE-ELOX MONDO 1/35A Fgedsygq D Ejpfx Aa Ejf

Year of construction: 2017, condition: like new (used), functionality: fully functional, machine/vehicle number: PII n. 1681, Impact Refiner Mill type P-II Feeding: the mill must be supplied in a regular, continuous, and consistent manner. Loading port on the front cover. Usable opening 305 x 250 mm. Cast iron housing with hinged front cover, equipped with a safety microswitch. Replaceable protective plates on the front and rear covers. Peripherally toothed grinding liners, cast in high-chromium alloy, with adjustable distance from the hammers. Fedpfx Asxrk Itsa Eegf Disc rotor with 4 fixed high-mass hammers, cast in manganese steel. The rotor can be removed through the front cover. Shaft mounted on roller and ball bearings, grease-lubricated and protected by dustproof labyrinth seals. Perforated grid; the grid is removable through the front. Rotation speed: 1800-2400 rpm. Pulley for V-belts. Required power: 22-30 kW. Drive unit: 1 x 30 kW motor, pulley, belts, tensioner, and protective guard. Support frame for mill and motor, complete with connection for aspirated discharge.

Year of construction: 2024, condition: new, ~ SPEED 700 , SEMI AUTOMATED ~ APPLICATIONS Production of: - paving - kurbs - concrete blocks for: -masonry -foundation blocks -posts, floor slabs -chimneys, -gutters -roadway gutter covers. ADVANTEGES : - Vigorous vibration coupled with hydraulic pressing of the concrete guarantees high quality concrete products. - Vibrators mounted on the counter mold play an important role in concrete compaction. - Chrome-plated pipe guide columns - Teflon-coated sliding bearings - Our wide range of molds can provide a diverse production. - Reliable mechanical and hydraulic systems. OPERATE : ~ Mostly manual: -Drawer(back/ fort Fjdpfx Aaehufyhe Eogf -Mold (up/down) -Counter Mold (up/down) ~ Commands executed automatically: -start/ stop vibration when reaching height -start/ stop pallet feeding exhaust line stop) COMPONENTS: 1.) the press 2.) pallet stacking space 3.) pallet feeding line 4.) concrete bunker 5.) drawer (1) for concrete mold feeding 6.) pallet discharge line with fresh products 7.) hydraulic unit 8.) lever panel for the machine operator TEHNICAL FEATURES: - Pallet dimensions: 700x670x40mm - Active surface: 640x640mm - Minimum/maximum finished product height: 40mm/ 250mm - Vibration frequency: 3000rpm - Hydraulic pump flow: 40 l/min - Cycle time: 60 -100 sec (Semi-automatic version) - Cycle time: 30 – 50 sec (Fully automated version) - Installed power: 15.50 kW - Hydraulic power unit: 7.5 kW - Vibrating table vibrators: 6.00 kW + 0.28 kW - Counter mold vibrators: 0.80 kW - Discharge line: 0.55 kW - Supply voltage: 380V OVERALL DIMENSIONS: Width: 1.60m (without hydraulic unit and control panel) Length: 5.60m Height: 2.85m Machine mass (without mold): 4,000 kg Approx. mold mass: 250 - 300kg ADDITIONAL PRODUCTS / OPTIONAL: 1.) AUTOMATIC OPERATION : ( + 6.300 euro ) - PLC (Mitsubishi Electric) logic programmer + touch display + software for automatic machine operation Reduces the time of a production cycle, higher productivity (30 -50sec) 2.) SECOND DRAWER (2) for finishing layer for paver and kurbs + BUNKER ( + 3.900 euro ) 3.) CONCRETE MINISTATION SEMIAUTOMATED ( + 18.800 euro) Component parts: a.) Sand bunker 2 m2 + Volumetric dosing with conveyor belt + Vibrator b.) Gravel bunker 2 m2 + Volumetric dosing with conveyor belt c.) Electric control panel d.) Concrete Mixer MX 300 ( Fluid concrete: 300 liters Semi-wet concrete: 200 liters, 2.4 cubic meters of semi-wet concrete/hour ) 4.) AUTOMATIC LIFT (elevator) ( + 4.000 euro) 5.) CONVEYOR 6M , for transporting the concrete to the machine bunker ( + 4.000 euro) - Band width: 500mm - 7mm smooth rubber mat with 3 inserts - Motor 1.5kW (380V) PLEASE FOR THE COMPLETE OFFER SEND US AN EMAIL.

Condition: good (used), Technical data for the pallet racking crossbar: Racking system: Vogelsang Type: NS Fgodpfx Asibbd Hoa Esf Included in the scope of delivery: 01x Pallet racking crossbar, used Material color: cream white Crossbar type: K110 Box profile: 110 x 50 mm Clip: 4 HK (hooks) Clear width: 2,700 mm Max. load per crossbar pair: 2,700 kg, with evenly distributed load 02x Locking pins, used Design: fully galvanized For securing the longitudinal supports against unintentional lifting out.

Condition: good (used), Technical data for the pallet racking crossbeam: Racking system: Meta (Thyssen) Included in the scope of delivery: 01x Pallet racking crossbeam, used Material color: orange Fgsdpfx Aoibmhfoa Esf INP profile: 120 x 58 mm Agraffe: 3 hooks Clear width: 2,700 mm Maximum load per pair of crossbeams: 3,000 kg, with evenly distributed load 02x Safety pins, used Design: fully galvanized For securing the longitudinal supports against unintentional lifting.

Condition: good (used), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Simon Blank Fodpfefq Du Dsx Aa Ejgf We offer you a used pallet racking beam from the manufacturer Vogelsang for sale. Technical data for the pallet racking beam: Manufacturer: Vogelsang Type: NS Included in the scope of delivery: 01x Pallet racking beam, used Material color: orange Box profile: 110 x 50 mm Clear width: 2,700 mm Max. load per beam pair: 2,700 kg, with evenly distributed load 02x Locking pins, used Design: fully galvanized For securing the longitudinal supports against unintentional lifting Our services at a glance: (Prices on request) Assembly, installation Please note our general assembly conditions Racking inspection Racking inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: good (used), Technical data for the pallet racking crossbeam: Fgjdpfx Ajibngnja Eof Racking system: Meta (Thyssen) Included in the scope of delivery: 01x Pallet racking crossbeam, used Material color: orange INP profile: 100 x 50 mm Agraffe: 3 HK (hooks) Clear span: 2,700 mm Max. load per pair of crossbeams: 3,000 kg, with evenly distributed load 02x Locking pins, used Design: fully galvanized For securing the longitudinal supports against unintentional lifting out.

Condition: good (used), Technical data for the pallet racking beam: Racking system: Link 51 Type: Boltless XL Fjdpfxskvnm As Aa Esgf Included in the scope of delivery: 01x Pallet racking beam, used Material color: yellow Box profile: 80|53 x 45|25 mm Beam type: 4 BST Step profile: H 28 mm, W 20 mm Clip: 3 HK (hook) Clear width: 2,700 mm Max. load per beam pair: 900 kg, with evenly distributed load 02x Locking pins, used Design: completely galvanized For securing the longitudinal beams against unintentional lifting out Additional information about the pallet racking beam: Beam type 4 BST is used to insert chipboard, steel panels, etc., which then end up approximately flush with the top edge of the racking beams. This avoids any height loss. Furthermore, the front of the step beam protects the floors or the insertion segments from damage. The beams are not intended for pallet storage but serve as picking levels; i.e., for storing cartons, small parts, etc.

Condition: good (used), Technical data for the pallet racking crossbeam: Racking system: Electrolux Included in the scope of delivery: Fgjdpfeipt Agox Aa Eof 1x Pallet racking crossbeam, used Material color: silver-grey U-profile: 80 x 45 mm Clear width: 2,700 mm Design: Head crossbeam

Condition: good (used), Technical data for the pallet racking traverse: Racking system: Meta (Thyssen) The scope of delivery includes: 01x pallet racking beam, used Material color: orange Box profile: 140 x 50 mm Beam type: HN 140|15 Bracket: 4 HK (hooks) Fedpfx Aaouny A Se Eogf clear width: 2,700 mm Max. load per pair of beams 4,000 kg, with evenly distributed load 02x safety pins, used Version: completely galvanized For securing the longitudinal beams Against unintentional lifting out Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), Technical data for the pallet rack traverse: Racking system: Link 51 Type: Boltless XL Included in delivery are: 01x pallet rack traverse, used Material color: yellow type of truss: B120ZC box profile: 120x50 mm agraffe: 3 hooks clear width: 2.700 mm max. load per truss pair 2.700 kg, with evenly distributed load 02x safety pins, new execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: Fgodpfxelwuw Uj Aa Eef This item is offered for pickup only. A desired beyond that Transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), We are offering you a used flow rack for sale from the manufacturer Bito. The scope of delivery includes: 01x Flow rack, used Manufacturer: Bito Frame material color: similar to cream white / Sendzimir galvanized Roller material color: anthracite Segment length: approx. 2,700 mm Segment depth: approx. 1,350 mm Track spacing: approx. 175 mm Roller width: approx. 25 mm Fgsdpfjg Nt Uzsx Aa Esf Pitch: approx. 26 mm Roller diameter: approx. 25 mm Roller material: plastic Number of rails per flow rack: 16 pcs.

Condition: good (used), The scope of delivery includes: 1x used pallet racking beam Material color: orange Box profile: 130 x 40 mm Connectors: 4 hooks Type: Head beam Fgjdpfx Aajhqh Haj Eof Clear width: 2,700 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope.

Condition: like new (used), 2,700 m² Schäfer R3000 two-story warehouse shelving system Fedpfx Aaofiqhfo Esgf Used, in top condition, like new, see pictures Manufacturer: SCHÄFER R3000 CAD planning and assembly Price on request! Partial sale possible Negotiable price: on request! Goods are in stock and immediately available Transport and assembly possible upon request. Inspection possible at any time by appointment. Further information available upon request. Constantly over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Changes and errors in technical data, specifications, and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT, ex warehouse) Lenox Trading – Top warehouse technology & heavy-duty shelving used & new Description: Are you looking for high-quality warehouse shelving to buy? With around 100 employees, Lenox Trading is one of the largest dealers for new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of shelving immediately available • 20,000 m² of warehouse platforms & steel structures immediately available • 30–50 semi-trailer loads of goods handled weekly for maximum selection 📦 OUR RANGE (BUY ONLINE AT A GOOD PRICE): Whether pallet racking, heavy-duty shelving, high-bay racking, shelving with shelves, tire racking, or shelving for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling, and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty shelving Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete warehouse stocks including complete clearance. 2. Commission-based auction: Conducting auctions on behalf of clients. Our full-service through our own employees: Cataloging, office preparation, inspection, goods delivery, logistics, dismantling, and complete handover. Whether you came across us through heavy-duty shelving or are looking for heavy-duty shelving galvanized / heavy-duty shelving system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: excellent (used), For sale: a Vötsch VT 7004 climate chamber, designed for precise research and testing under controlled temperature conditions. This unit is suitable for use in laboratories, quality control departments, materials research, electronics, and the automotive industry. The chamber is equipped with an electronic temperature controller, an efficient cooling system, and a forced air circulation system that ensures uniform temperature distribution throughout the working chamber. The interior is made of stainless steel, which facilitates cleaning and ensures high durability. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Model: VT 7004 Year of manufacture: 2000 Device number: 58566024350010 Power supply: 230 V AC, 50 Hz Fjdpfezi U Tnox Aa Ejgf Rated power: 2.0 kW Rated current: 10 A Refrigerant: R404A – 0.7 kg R23 – 0.22 kg Maximum working pressure: 25 bar Interior: stainless steel Electronic temperature controller Forced air circulation Door with silicone seal Lighting and service access port in the chamber Compact design Condition: Used unit. Visually in good condition. The chamber is clean and complete. Sold in the exact condition as shown in the pictures.

Condition: new, For sale: Professional carrying harness for self-contained breathing apparatus (SCBA) Dräger PSS 7000 Fgodpfoy Ilvgjx Aa Eef • Model: PSS 7000 • Pressure gauge: up to 300 bar • Part No: 3355850 • Type No: 3355068 • Technical condition: good • Complete set of straps and buckles • Sturdy frame with no cracks Selling exactly what is shown in the photos. No cylinder or face mask included. Firefighter-grade equipment – top series from Dräger.