Used Intermac Genius 61 Ct for sale (7,011)

Condition: used, Control card, output card, controller -Manufacturer: Servomac -Type: CT 134A -Number: 2x control cards available -Price: per piece -Dimensions: 20/165/H130 mm Hedpfocc Apysx Ampjl -Weight: 0.14 kg

Condition: used, Control card, output card, controller -Manufacturer: Servomac -Type: CT 107B Hsdpfxocc Ap Aj Ampjl -Number: 2x control cards available -Price: per piece -Dimensions: 20/165/H130 mm -Weight: 0.14 kg

Year of construction: 2009, condition: used, Air conditioner, air conditioning -Transfer: in the current condition as seen -Housing back wall: slightly deformed at the top -Stulz: MINISpace EC room cooling CCD 61 A -Power: approx. 6.8 kW -Dimensions: 600/670/H2250 mm Hedpfefl N Drox Ampel -Weight: 172 kg

Condition: used, Gear motor, electric motor -Speed: 61 rpm Hsdpoc U Tz Dofx Ampel -Power: 0.37 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Price: per piece -Number: 8x available -Dimensions: 405/140/H180 mm -Weight: 14 kg

Condition: used, Control card, output card, controller -Manufacturer: Servomac -Type: CT 166 -Number: 2x control cards available Hodpfxscc Apze Ampsl -Price: per piece -Dimensions: 20/165/H130 mm -Weight: 0.14 kg

Year of construction: 1993, condition: used, Air cooler, evaporator, cold store, refrigerated container, cold room, ceiling air cooler -Number: 1x fan -Fan diameter: 400 mm -Lamella spacing: mm Hjdpjb N Uliefx Ampjl -Dimensions: 1030/1770/H400 mm -Weight: 82 kg

Condition: used, Control card, output card, controller -Manufacturer: Servomac -Type: CT 137A Hsdpfx Amocc Ap Dspjl -Number: 2x control cards available -Price: per piece -Dimensions: 20/165/H130 mm -Weight: 0.14 kg

Condition: used, Control card, output card, controller -Manufacturer: Servomac -Type: CT 112A -Number: 2x control cards available -Price: per piece -Dimensions: 130/290/H50 mm Hedpfx Aocc Enzempsl -Weight: 1.1 kg

Condition: used, Year of construction: 1980, machine/vehicle number: 442109, Nutmaschine - Creasing machine E. Bickel HK3/61Year 1980 - Serial-No. 442109 Hedpfx Aoh Axfbsmpjl Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2004, Technical details: turning diameter over bed: 610 mm turning dia. over face-slide: 350 mm swing diameter over bed: 610 mm centre distance: 1390 mm control: Fanuc 0i-Mate TC x-axis: plan: ca. 305 mm z-axis: längs: ca. 1350 mm revolution per minute: 22 - 2200 U/min feed:: X + Z-Achse: 5 / 10 m/min. spindle bore: Ø 70 mm tool turret - number of stations: 6 tailstock quill taper MT: MK5 Hjdpfx Aeu Ix I Ujmpel tailstock quill stroke: 150 mm Weight approx.: 2,7 t total power requirement: 15 kW dimension machine xH: 3,7 x 1,7 x 1,7 m dimensions of hydaulic: 630 x 460 x 900 mm other features: -hydr. chuck TONFAU Ø 300mm -hydraulics -Coolant system -control panel -double foot switch accessories: -div. mold jaws -div. soft jaws -6 footrests *

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Speed range: 16 – 3150 rpm Feed range longitudinal & face: 0.5 – 5000 mm/min Rapid traverse longitudinal & face: 9 m/min Main drive: 30 kW Dimensions of machine with chip conveyor (L x W x H): 5400 x 2200 x 2000 mm Weight: 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT display General description: CNC manual input control system with program entry via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu technology with plain text display of all functions. Operator keypad, display, and electronic handwheel located within a separate chip guard housing. The EPL control offers the following capabilities: • Direct interactive program entry and editing by the operator through the EPL control without manual technological preparation • NC programs in ISO/EIA format can be entered, output, or manually keyed in via the RS 232 serial interface Machining cycles: • Removal cycles for longitudinal, facing, and contour turning, including with allowance • Thread cutting • Undercuts as per DIN 509-Form E and F and DIN 76; grind stock programmable • Axial and radial grooves as per DIN 471 and 472, including bottom finishing • 90° radii and 45° chamfers • Automatic cutter radius compensation for cycles, undercut, groove, radius, chamfer Programming: • Block-orientated, metric/inch, diameter for absolute entry, radius for incremental entry • Full circle programming, subroutine technology, hide levels for program sections, zero point offset, mode selection via menu Program entry and output: • Interactive via guided menu or direct in dialogue • Hydraulic 3-jaw chuck Ø 315 mm with through spindle bore Ø 80 mm • Hinged chip conveyor Hjdpfovr Eh Eox Ampjl • 12-position tool turret VDI 40, 6 standard stations + 6 driven tool stations • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 various standard toolholders (to be finalized on site) Overhauled servo drive for main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Applicable material: Food Hsdox Tcnkepfx Ampol Power: 10 kW (14 HP) Empty weight: 175 kg Dimensions (LxBxH): 84 x 85 x 168 cm Current frequency: 60 Hz Voltage: 400

Condition: excellent (used), Year of construction: 1997, turning diameter over bed slide: 1,240 mm, turning diameter over top slide: 980 mm, turning length: 3,000 mm, DBC Turning Length: 3000mm Swing over bed Ø: 1240mm Swing over cross slide Ø:980mm Swing in the gap Ø: 1980mm Gap length: 1500mm Spindle bore: 130mm Spindle power: 30kW Bed width: 500mm Stroke pinole: 300mm Spindle taper: 5Mk Speeds / ranges: 800Rpm Feed rate X-Axis: 8000mm/min. Feed rate Z-Axis: 8000mm/min. Workpiece load: 4000 Length: 7000mm Width: 2200mm Hjdpfxsx Di Rqj Ampol Height: 2300mm Weight: 12400kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2009, volume flow: 7.7 m³/h, operating pressure: 8 bar, BOGE S 61 -2 Screw Compressor With heat exchanger Motor 45 kW Hodpexkz Tqofx Ampol Capacity 7.70 m3/min Pressure 8 BAR Year of manufacture 2009 COMPRESSOR FULLY FUNCTIONAL.

Condition: new, Rexroth DBETE-61/200YG24K31F1V pressure relief valve R901103801FD, serial number as per photo, unused in original packaging, 100% functional, scope of delivery as per photos Hedpfxoi Ecrue Ampel

Condition: new, Rexroth DBETE-61/200YG24K31F1V pressure relief valve R901103801FD, unused, 100% functional Hedpfx Aoi Ecrxempol

Condition: new, The CT 25 (Ø 0.2 to 2.5 mm) replaces and/or complements the 25TS, which operates with a cam system. This machine has between 11 and 16 axes, details of which are given below: - 8 independent slides - wire feed - nozzle rotation - servo spinner OR lateral movement of winding finger Optional (up to 5 additional axes) - servo cutter - servo spinners (additional) - lateral movement of winding finger - transfer for raising the second (German-type) extension spring eye. Maximum feed speed: 121 m/min. Hedpsvbd Ezefx Ampsl Slide travel: 50 mm Machine dimensions: 1.30 x 1.46 x 1.68 m. Machine weight: 900 kg. If you have any further questions, please do not hesitate to contact us.

Condition: good (used), Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trolleys, tank rollers, machine transport rollers -Machine transport roller: armored roller transport roller Cargo Trolley Type CT-12 -Load capacity: 18000 kg -Rollers: 12 polyurethane rollers -Number: 4x transport rollers available Hsdpfxow Skqis Ampsl -Price: per piece -Dimensions: 480/310/H100 mm -Weight: 36 kg/piece

Condition: good (used), geared motor, electric motor -Speed: 61 rpm -Power: 0.37 kW -Design: B14 angle -Shaft diameter: Ø 24 mm Hedpfx Amsb A Rndjpjl -Brake: 24 V -Protection class: Tropical resistant -Weight: 15 kg

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 260105, saw blade diameter: 800 mm, overall weight: 2,960 kg, table length: 700 mm, Equipment: CE marking, TECHNICAL DETAILS Min. saw blade diameter: 790 mm Max. saw blade diameter: 800 mm Spindle saw blade diameter: 40 mm Infeed table length: 700 mm Outfeed table length: 700 mm MACHINE DETAILS Main motor power: 15.0 kW Dimensions & Weight Dimensions (L x W x H): 3,600 x 2,550 x 2,100 mm Weight: 2,960 kg Hsdoxq Au Aepfx Ampsl EQUIPMENT CE marking

Year of construction: 2013, condition: new, Unused Siebtechnik BHG 21/61/1 WS (WS 85 System) with GR 45 Unbalance exciter on top. Hedpfx Ajnwgrpsmpsl Banana Screening Machine. Mach. No.: 28102 . Auftr.nr.: 1-200755-00 . Year of manufacure: 2013 . Complete with E.motor, Cardan shaft and Rubber springs .

Condition: refurbished (used), Manufacturer: Steinert Type: UMS 45 70 80/61 3,1 kW / 51 A. / 61 V. 100% ED Magnet L x W: 806 x 750mm. Conveyor Belt: 800mm. (new) AA.: Ca. 1.300mm. Weight: 1.550 KG Hodpfx Amjwvaidopol With new transformer rectifier of 380V. Primary.

Condition: ready for operation (used), Ismet DAWT 61 / 727918 line reactor, used, in good condition, 100% functional, scope of delivery as per photos ATTENTION: Please enquire separately for packing and shipping charges! Hjdpsx Etzrsfx Ampsl

Condition: excellent (used), Year of construction: 1996, spindle bore: 160 mm, Swing over bed Ø 1040 mm Swing over cross slide Ø 710 mm Hodsxtbf Eopfx Ampjl Swing in the gap Ø 1580 mm DBC Turning Length 3000/4500 mm Gap length 1500 mm Spindle bore 160 mm Spindle power 40 kW Bed width 800 mm Spindle taper 6 Mk Workpiece weight 3500 Speeds / ranges 800 Rpm Feed rate X-Axis 10000 mm/min. Feed rate Z-Axis 10000 mm/min. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), CT CTM4-14.3-20R.94-5F6 motor SN: 07070309, used, in good condition, 100% functional, scope of delivery as per photos. Hodpjx Dtxrofx Ampjl