Used Hartford Vmc 1270 for sale (438)

Condition: used, x-travel 800 mm y-travel 510 mm z-travel 500 mm control Heidenhain TNC 370 weight of the machine ca. 3600 kg Lodpfoy Sbl Esx Amnsrl

Condition: used, Year of construction: 1998, x-travel 800 mm y-travel 510 mm z-travel 500 mm control Heidenhain TNC410 Lredpfxey Sblfe Amnel weight of the machine ca. 3600 kg

Year of construction: 2010, condition: used, Used machine Used Schneider screw compressor type AIRMASTER AM 7-10 with Schneider DK 985 ECO refrigerated compressed air dryer and compressed air tank. Year of manufacture: 2010 Compressor technical data: Volume flow: 930 l/min Final compression pressure: 10 bar Motor power: 7.5 kW Refrigerated dryer technical data: Air volume flow: 985 l/min Max. operating pressure: 16 bar Refrigerant: R134a Air connection: 3/4'' internal Power consumption: 0.3 kW Compressed air tank technical data: Tank volume: 270 l Max. operating pressure: 16.5 bar Availability: by arrangement Location: Flörsheim Ledpsy Rbgysfx Amnerl

Condition: used, Year of construction: 1998, material width 100 - 450 mm material thickness 1,0 - 14,0 mm Lredevuugiepfx Amnjl coil weight 10,0 t coil internal diameter 470 - 520 mm coil external diameter 1100 - 2000 mm no. of straightening rolls 12 straightening roll diameter 2x70 / 2x96 / 8x127 mm number of draw-in rolls 2 inlet roll diameter 160 mm min. material width 100 mm speed 15 m/min power requirement 75,0 kW weight of decoiler 6,4 t weight of straightening machine 12,8 t dimensions decoiler (WxDxH) 3,1 x 1,4 x 3,7 mm dimensions straightener (WxDxH) 2,5 x 3,4 x 2,7 mm Straightening machine RMS Vario-12-70/96/127-450 with infinitely variable drive, driven straightening rolls, supporting rolls, upper straightening cassette hydraulic liftable, hydraulic threading wedge Decoiler HES 12-650 with infinitely varieble insertion drive, pneumatic lag brake, hydraulic snubber roll (motoric driven), hydraulic centralized expansion hydraulic coil lifting device hydraulic loop bridge coil loop control via ultrasonic cropping shears HSO 150-0450 working direction from left to right as is where is, WITHOUT putting into operation - Video at seller's site before dismantling available

Condition: used, Year of construction: 1999, - BAZ Johnford VMC 850 - Year of manufacture: 1999 Lodpfx Ajy N Sg Ijmnorl - 24-position double-arm tool changer - Table size: 1000x500mm - Spindle speed: 8,000 rpm - Travel: 800x450mm - Control: Fanuc Oi - Machine is operational and can be inspected under power with cutting demonstration

Year of construction: 2025, operating hours: 300 h, condition: like new (used), Equipment: CE marking, TECHNICAL DETAILS: Drive Unit: Model: VM800T. Maximum load capacity: 400 t. Turning capacity: 800 t. Maximum speed: 108 cm/min. Minimum speed: 20 cm/min. Maximum diameter: 8,000 mm. Minimum diameter: 2,500 mm. Length: 6,360 mm. Width: 1,544 mm. Height: 1,565 mm. Weight: 15,300 kg. Diameter range: As per drawing, 2,500 ÷ 8,000 between 61º and 54º. Wheels: Steel, Ø 950 x 350 mm. Power: 2 motors of 7.5 kW with primary epicyclic gearboxes and secondary worm gearbox. Idler Unit: Model: VC800T. Maximum load capacity: 400 t. Lredpfxoy Ex D Sj Amnsl Maximum diameter: 8,000 mm. Minimum diameter: 2,500 mm. Length: 5,852 mm. Width: 1,500 mm. Height: 1,565 mm. Weight: 12,720 kg. Diameter range: As per drawing, 2,500 ÷ 8,000 between 61º and 54º. Wheels: Steel, Ø 950 x 350 mm.

Condition: used, functionality: fully functional, HYDRAULIC VALVE Ledpfx Aexzfx Sjmnerl All our items have been inspected by the technical department.

Year of construction: 2001, condition: ready for operation (used), Three older milling machines are available. 1) CNC vertical center Bridgeport VMC 1000/22, year of manufacture: 1999, travel X/Y/Z: approx. 1020mm/510mm/500mm, table dimensions X/Y: approx. 1150mm/490mm, max. table load: 900kg, tool holder: SK40, tool positions: 22, speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2850mm/2200mm/2750mm, weight: approx. 3900kg, control: Heidenhain TNC 410P. 2) CNC engraving and milling machine Paso P700C, year of manufacture: 2001, machine dimensions X/Y/Z: approx. 1650mm/1550mm/2450mm, weight: approx. 1700kg. 3) CNC engraving and milling machine Kuhlmann Prokomat 25S, year of manufacture: 1991, travel X/Y/Z: approx. 700mm/600mm/300mm, table dimensions X/Y: 720mm/700mm, portal clearance X/Y: 800mm/400mm, feed: 6m/min, machine dimensions X/Y/Z: approx. 1600mm/1600mm/2400mm, weight: approx. 1600kg. Documentation available. An on-site inspection is possible. Individual sale possible. Lsdsy E S D Sspfx Amnjrl

Condition: like new (used), Year of construction: 2009, operating hours: 20,929 h, functionality: fully functional, machine/vehicle number: 23500, travel distance X-axis: 3,320 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 760 mm, feed rate X-axis: 24 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller model: Heidenhain, table width: 3,400 mm, table length: 700 mm, spindle speed (min.): 10,000 rpm, spindle speed (max.): 24,000 rpm, operating hours of spindle: 20,929 h, input voltage: 230 V, We are selling the machine because we need to free up space in the factory. CNC Machining Centre TVMC-3000 (L) Table: up to 3400 × 700 mm (maximum load 4,000 kg). Travel X/Y/Z: up to 3320 × 710 × 610 mm. Spindle: BT40 taper, speed up to 14,000 RPM. Automatic tool changer: 24 positions. Rapid traverse: up to 30 m/min. Precision: positioning ±0.005 mm / 300 mm. Lsdpfoyt Np Tox Amnsrl CNC control available: Heidenhain.

Condition: used, power: 200 kW (271.92 HP), first registration: 05/2018, front tire size: 710-26,5, rear tire size: 710-26,5, mileage: 11,870 km, axle configuration: > 3 axles, number of seats: 1, Equipment: cabin, crane, | John Deere 1270G Harvester | Auxiliary heater | 11,870 operating hours | 8x8 drive | Rotatable cabin | Air conditioning | Good condition | Fully operational | Drive: Hydrostatic/mechanical power transmission with 2-speed gearbox | Load-sensing hydraulic system, stabilization brake | Engine: 6-cylinder John Deere 6090 PowerTech PLUS engine compliant with EPA FT4/EU Stage V emission standards | 200 kW, 1315 Nm @ 1200-1400 rpm | Reversible hydraulic fan, PowerCore air filter, glycol-based coolant | Tires: Front axle (4) 710-26.5 Nokian Forest King F2 (3050 mm), Rear axle (4) 710-26.5 Nokian Forest King F2 (3050 mm) | Crane: Parallel boom CH7 (10 m reach), gross lifting torque 197 kNm, slewing torque 50 kNm, slewing angle 220°, endless rotator Black Bruin BBR 15 HD with braked pendulum | Subject to errors, data entry errors and prior sale. Lsdpfxsy Egwyj Amnjrl

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, CREEMERS RCB11 270C screw compressor (ATLAS COPCO screw stage), unit mounted on a 270L tank, after service. Technical data: Lredpfx Ajyy R Dyjmnsl Capacity: 1.45 m3/min; Pressure: 10 bar; Motor: 11 kW; Operating hours: 9102 h; Year of manufacture: 2010. Price: 9,200 PLN net / 11,316 PLN gross The compressor is fully functional. Service support provided.

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 1,250 mm, controller manufacturer: SIEMENS, controller model: 810T, total height: 2,900 mm, number of axes: 3, This 3-axis Hardinge Bridgeport MMD VMC1250 P3 vertical machining centre was manufactured in 2006. It features a Siemens 810T control system and offers an impressive X-axis travel of 1250 mm, making it suitable for various milling applications. The machine's transport dimensions are approximately 4400 mm in width, 5500 mm in depth, and 2900 mm in height. Consider the opportunity to buy this Hardinge Bridgeport MMD VMC1250 P3 machine we have for sale. Contact us for further details. Lsdex D Hk Iepfx Amnorl Dimensions Machine Depth 4400 mm

Condition: ready for operation (used), Year of construction: 2010, pressure 40.0 t chamfer lenght 1270 mm distance between columns 1000 mm column arm 200 mm stroke 100 mm dayligth 308 mm ajustment speed 150 mm/sec working feed 1-10 mm/sec return speed 100 mm/sec table width 100 mm table height 900 mm control DNC 60 PS oil volume 100 l voltage 400 V total power requirement 5.5 kW weight of the machine ca. 2750 kg - in checked conditions - machinevideo - ?v=WRzqKruFUvY Equipment: - CNC electro-hydraulic press brake - CYBELEC "DNC 60 PS" CNC control * Swiveling control panel, front left * Tool & program library - CNC electro-motorized backgauge (X-axis) * X-axis travel = 800 mm * 2x manually adjustable backgauge fingers (R+Z axes) * Backgauge on ball screws - CNC controlled axes Y1 - Y2 - X - Rehfuß upper tool system "A" with quick-change clamping * Additional crowning device in the tool holder Lrsdpfx Amsx Emqtsnsl - 4V universal die block with 60 mm die shoe - 2x sliding material/support arms ("Sliding System") - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light barrier behind the machine - FIESSLER AKAS laser safety device in front of the machine - 1x freely movable Double Foot Switch - Operating Instructions (PDF)

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, controller manufacturer: Siemens, controller model: 828D, Spindle Technology: Direct drive Speed: 12,000 rpm Power: 20 kW Torque: 176 Nm Tool holder: SK 40 Tool changer: 40 stations Working Area Travel X: 1,500 mm Travel Y: 700 mm Travel Z: 650 mm Fixed table (X/Y): 1,650 x 700 mm Table load capacity: 1,400 kg Other Features Rapid traverse (X/Y/Z): 20/20/15 m/min Machine dimensions (L/W/H): 4,200 x 2,224 mm Machine weight: 11,000 kg Equipment Chip management: Hinged-belt conveyor Coolant management: Internal coolant supply 20 bar Coolant filtration: Oil separator Control cabinet cooling: Air conditioner Lsdpfxox Ahg Is Amnerl Workpiece measurement: Renishaw OMP 60

Condition: good (used), Year of construction: 2009, operating hours: 899 h, machine/vehicle number: SN20090545, punching force: 30 t, sheet thickness (max.): 6 mm, table length: 2,000 mm, table width: 1,270 mm, overall weight: 11,000 kg, working range: 40 mm, ERMAK RPP 1270x30 Ton Punching Machine, Year 2009 Brand: Ermak Model: RPP 1270x30 Serial Number: SN20090545 Year: 2009 Main Features: Operating Hours: - POWER ON Hours: 899 hours - Punching Hours: 1 hour 6 minutes - Punching Force: 30 tons - Maximum Capacity: - Sheet Thickness: 6 mm - Sheet Dimensions: 1270 mm (width) x 2000 mm (length) - Travel: 40 mm - Axis Travels: - X-axis: 2000 mm - Y-axis: 1270 mm - Travel speed: - X-axis: 70 m/min. - Y-axis: 70 m/min. - C-axis speed: 100 rpm. - Strokes per minute: Up to 700. - Accuracy: - Positioning: ±0.03 mm - Position tolerance: ±0.1 mm - Numerical control (CNC): GE Fanuc 18i-PB - Oil capacity: 300 liters. - Power: 15 kW - Machine dimensions: - Length: 4250 mm. - Width: 4000 mm. - Height: 2330 mm. - Weight: 11,000 kg. Lrjdov S Ufyopfx Amnel

Condition: excellent (used), Year of construction: 2025, operating hours: 11 h, functionality: fully functional, variable screw compressor ALMIG COMBI XP 11-270D (5 to 13 bar) include Dryer with time controlled drain include 270 liter tank include controller Air Control Base Lrsdsw Duytjpfx Amnel Year of construction: 2025 Operatin hours: 5 Technical specifications Type: Combi XP 11-270D Possible operating pressures of the system (continuously adjustable): 5 - 13 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 Appendix C. at 5 bar (g): 0.30 to 2.00 m³/min at 6 bar (g): 0.30 to 1.89 m³/min at 7 bar (g) : 0.30 to 1.78 m³/min at 8 bar (g) : 0.29 to 1.67 m³/min at 9 bar (g) : 0.29 to 1.57 m³/min at 10 bar (g) : 0.29 to 1.46 m³/min at 11 bar (g) : 0.28 to 1.36 m³/min at 12 bar (g) : 0.28 to 1.24 m³/min at 13 bar (g) : 0.27 to 1.17 m³/min Nominal power drive motor: 11 kW Degree of protection / insulation class drive motor: IP 23 Operating voltage / frequency: 400/60-315/3 V / Hz / ~ Compressed air connection: 3/4“ G Length: 1530 mm Width: 700 mm Height: 1640 mm Weight: 590 kg Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Condition: as good as new (ex-display), Year of construction: 2024, pressure 60.0 t chamfer lenght 1270 mm distance between columns 1000 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 165 mm/sec work stroke 275 mm dayligth 530 mm table height 900 mm table width 90.0 mm back stop - adjustable max. 800 mm oil volume 150 ltr. voltage 400 V engine output 7.5 kW Weight 4320 kg range L-W-H 2250 x 1960 x 2750 mm Demonstration/demo machine (!!) From our showroom (like new) With very few operating hours ----- CNC press brake with special equipment * Version "ERGO" - knee room for the operator * flexible articulated arm mount for the controller * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: Ljdpfxexabt Ae Amnsrl - DELEM CNC control model DA-66T graphic/touch screen * 2D graphical programming * 17" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface * intuitive, graphical entry of profiles * Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation * Radius programming * Graphic tool and product library * Collision monitoring * 3D visualization * 1GB memory - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes : Y1 - Y2 - X - R - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - Front, foldable sheet metal support - Double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes

Condition: new, 3-roll round bending machine Ostas ORM 1270 x 140 Technical specifications: Special equipment included in the price: motorized lower roll adjustment hardened rolls motorized rear roller adjustment digital display sheet width 1270 mm sheet thickness 5,0 mm max. sheet thickness 4,0 mm bending roll length 1270 mm roll diameter 140 mm weight 1400 kg dimension L-W-H 2500 x 800 x 1100 mm Lodpfx Asfpmz Homnerl Motor: 2.2 KW Equipment: upper and lower roller electrically driven upper roller can be swung out conical bending device asymmetric roller arrangement self-braking main motor sep. control and operating panel safety line CE-sign

Condition: good (used), Packing Line, Packing Machine, Hood Shrink Machine, Hood Shrinker, Film Wrapping Machine, Sealing Tool Sealing Tool, Tray Sealing Machine, Tray Sealer -Manufacturer: Reepack, sealing tool from tray sealing machine Inauen VC999/ TS 1200 N -Type.: 342201270 -Shell size: 270 x 170 mm Lrjdom Hd Rhjpfx Amnsl -Cutting die: see photos for size -Dimensions machine: 540/520/H220 mm -Weight 49 kg

Condition: good (used), packaging system, packaging machine, hood shrink machine, hood shrinker, film packaging machine, sealing tool, tray sealing machine, tray sealer -Manufacturer: Reepack, Sealing Tool from tray sealing machine -Type: 342201270 -Shell size/cutting shape: dimensions see photos -Machine dimensions: 485/400/H220 mm -Weight: 36 kg Ljdpfxsvrccaj Amnorl

Condition: excellent (used), Trumpf Vectormark laser marker spare part carrier Here we offer you a Trumpf Vectormark laser marker. Trumpf Vectormark Trumpf VMc2 Type: VMc2 Condition: Spare part carrier Scope of supply: (See picture) Lrodpsfn Rhajfx Amnol (Changes and errors in the technical data, specifications are reserved!) We can answer further questions on the phone for you.

Condition: good (used), Trumpf Vectormark Ledjciz Iyjpfx Amnerl Type: VMc2 Trumpf Vectormark laser marker with Fuchs extraction and filter devices Trumpf Vectormark GREEN 532nm Trumpf VMc2 Laser marker, with frequency-doubled diode-pumped Nd:Yag laser with Hurryscan 10 - Galvo head from Scanlab Fuchs extraction and filter devices TKFD The integrated pre-separator ensures the high filter capacity Different filter levels are possible and can be perfectly customized Ideal for confined spaces - can be placed under a table or integrated into machines Welding fume separation class W3, IFA certified TKFD can also be transported in the trunk without modification Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 1998, • CNC machining centre Emco, Type VMC 600, year of manufacture 1998 • incl. handwheel + 3 vices with clamping devices Lredoyucbfepfx Amnel

Condition: ready for operation (used), Siemens 6FM1706-3AA20 positioning/counting module WF706 E-Stand A / 3 SN11270 ,used, normal traces of use, 100% functional, scope of delivery according to photos Lodpfx Amei I I D Eensrl

Condition: good (used), Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -Solenoid valve -Connection: 1/4" inch Price: per piece Quantity: 1 available -Weight: 0.8 kg Lodsb A Slnspfx Amnerl