Used H.w. Hermann Gmbh Sharc 320 T Dc for sale (106,419)

Condition: new, functionality: fully functional, Year of construction: 2026, actuation type: electric, pipe diameter (max.): 35 mm, tube wall thickness (max.): 2 mm, bending angle (max.): 360 °, bending radius (max.): 150 mm, bending radius (min.): 32 mm, overall weight: 28 kg, warranty duration: 12 months, Equipment: CE marking, emergency stop, foot remote control, the mobile bending machine with great performance: The compact, mobile design enables precise and repeatable bending stationary and directly at the installation site up to a tube diameter of 35 mm, CU 42 mm. Gedpfx Ajnfvx Nsfksbn A powerful three-phase motor and a precision gearbox provide powerful drive. The motor speed is automatically adjusted, resulting in increased return speed and shorter cycle times. Optimum bending accuracy and very high repeatability are achieved by position detection directly on the bending axis. The bending angle is easily and quickly set to 0.5° using pushbuttons. The large LCD display clearly shows the angles. The storage of up to three bending angles enables the rational bending of tubes with different bending results. For transport, the compact unit with accessories can be neatly and safely stored in sturdy transport cases. The "upright tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to enable crease-free bending and to bend bends with the slightest deformations from, for example, stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round iron can be bent without problems. POSSIBLE APPLICATIONS: - Hydraulic piping - Sample construction - Sanitary and heating construction - Technical data: - Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material. - Bending radius min/max: 36 mm/150 mm - Precise digital bending angle adjustment 0.5°. - Maximum 180º bending result; for special applications Endless operation possible - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop function - Alternating current 230 V connection - Weight 29 kg - Frequency converter and three-phase motor - 3 bending angles storable OPTIONAL ACCESSORIES: - Slide shoe holder - double roller holder - Profile bender PB20 - for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm - tripod base - machine case - tool case - Small bending device KBV - Special tool according to specification OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending up to an outer diameter of 100 mm stationary and directly at the assembly site. Transport is possible with lift trucks or the optional rollers. A powerful three-phase motor and a precision gearbox provide a powerful drive. The machine convinces with its compact and slim design as well as the very free bending range. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient and menu-driven user interface in 14 languages with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback.With the help of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The principle of "stationary tube and rotating tool" ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the profile bending attachment PB20 flat, square and round bars can be bent without any problems. Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering - Hydraulic piping - Meander bending - prototyping - Sanitary and heating engineering - shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material three-phase current 400 V - Bending radius up to 500 mm - Multifunctional machine control Bending angle adjustment (0,1°) - Maximum bending angle 240 - Safety foot switch with emergency stop - Weight 600 kg OPTIONAL ACCESSORIES: - Adapter system for tools from model series 3000/6000 with bending radius from 45 mm, incl. hexagonal shaft 40 mm - Profile bender PB20 - for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm Gbjdpfx Afsndk N Asksn - Small bending device KBV - Special tools according to specification - Software adaptations for special tasks OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: 1018, control type: PLC-controlled, degree of automation: manual, actuation type: electric, pipe diameter (max.): 50 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 3 mm, bending angle (max.): 195 °, bending radius (max.): 250 mm, warranty duration: 24 months, Equipment: CE marking, emergency stop, foot remote control, quick-change device, THE MANDREL BENDER WITH MANUEL CLAMPING: Gedpfx Ajnfvy Uofkjbn This mandrel bending machine with manual eccentric quick clamping for tube fixing enables rational bending. The compact drive unit with the detachable mandrel carrier offers advantages when used at the assembly site. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient touchscreen control with menu-driven user interface. The comfort control allows two speeds as well as a parameterizable overbending function to compensate for material springback. The bending sequence is significantly shortened by automatic "free travel" at the end of the sheet. For more complex bending tasks, bending programs can be stored with a maximum angle sequence of 50 bends per geometry. An almost unlimited number of programs can be stored on the control or a USB stick, as well as 200 materials. The plug-in bending tools allow rapid conversion to other tube sizes. For difficult geometries, the bending direction of the machine can be changed to right or left bending as standard. The open bending unit allows, for example, the bending of railing frames with only one weld seam. The optional calculation software on the PC determines the cut length for the entire geometry as well as the travel distance, twisting angle and bending angle for each bend. The mandrel retraction is programmable and can be retracted automatically ahead of time when a bending angle is reached. POSSIBLE APPLICATIONS: - Plant engineering, e.g. chemical industry - hydraulic piping - prototyping - Pipeline construction TECHNICAL DATA: - Bending capacity Ø 6 to 50 mm - bending radius min/max: 10 mm/140 mm - Bending radii 2 x D - multifunction machine control bending angle adjustment (0,1°) - mandrel beam lengths 1500/3000/4500/ 6000 mm (special version also longer) - Maximum 180º bending result - Weight 300-500 kg (depending on version) Optional accessories: - Automatic mandrel lubrication (minimum quantity) - Digital displacement measurement for length and twist (resolution 0.1 OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE PRACTICAL HAND BENDING DEVICE: The compact, mobile design allows precise and repeatable bending in the vice. Drive is provided by a screw-in handle. A lockable adjusting ring ensures repeatable bending. The exchange of the plug-in tools is conceivably simple. The principle of "stationary tube and rotating tool" allows bending with the smallest possible footprint. For thin-walled tubes, sliding shoes are used for crease-free bending in order to produce bends with the least possible deformation from, for example, stainless steel and copper tubes. The optional version with a hexagonal mount allows the drive force of the 3000 and 6000 bending systems to be used in addition to the vise. For this purpose, the KBV is simply placed on the bending shaft of the machine. POSSIBLE APPLICATIONS: - Hydraulic piping - prototype construction - Sanitary and heating construction TECHNICAL DATA: - Bending capacity Ø 6 to 18 mm - Manual bending angle limitation - Maximum 180º bending result OPTIONAL ACCESSORIES: - KBV with hexagonal fixture for bending on model 3000 or 6000 - Machine case - Length stop Gjdpfxong Amke Afksbn OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE PRECISION 3-ROLL BENDING MACHINE When developing the compact and mobile horizontal bending machine, the focus was clearly set on the production of dimensionally accurate coils such as handrails for spiral staircases. This is the supreme discipline, since two mutually influencing variables (radius and pitch) must be combined in a bend to form a dimensionally accurate geometry. The interaction of tube calculation on the PC, implementation on the bending machine, and control via the measuring equipment with final correction of the bending values ensure accurate bending. By simple and few inputs into the PC tube calculation program, the local printer provides a printout and supports the calculation of all necessary bending and correction data to operate the machine. A new powerful drive concept allows infinitely variable adjustment of the bending speed, requiring only a 230 V (AC) connection. Hardened steel tools as well as hard plastic tools that are gentle on the surface are available for selection. To ensure optimum feed even with tight bending radii, all three bending shafts are driven. The drive concept also proves its worth in tough daily use on the flat, when bending tubes and profiles. Customers of the 4800, 5000 and 6000 bending system have the option of purchasing the roller bending unit without the drive. The roller bending unit with the designation RB43, can be adapted to the bending systems 4800, 5000 and 6000 via the bending shaft. In this case, the machines act as a drive unit. POSSIBLE APPLICATIONS: Gbjdpjng A R Sofx Afkjn - Handrails/bottom rails for spiral staircases - Large tubular profile bends - General metal construction TECHNICAL DATA: - Bending capacity Ø 10 to 60 mm - bending radius min: 300 mm at Ø 42,4 mm - Bending direction right and left - Digital bending adjustment for radius and pitch - Safety foot switch with emergency stop function - Maintenance-free robust three-phase motor - Construction site suitable 230 V connection - Weight 280 kg OPTIONAL ACCESSORIES: - Support roller - for stabilization - Lifting roller - to produce controlled slope - MGR - measuring device to determine the correct radius - MGV - measuring device to determine the correct slope based on torsion - MPW - PC calculation program to determine the correct bending values - RB4303 - universal bending tool for profiles up to 60 mm height - Tools for special profiles OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via - Service contracts, maintenance at your site

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, actuation type: electric, pipe diameter (max.): 100 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 8 mm, bending angle (max.): 195 °, pressure (max.): 250 bar, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, emergency stop, foot remote control, quick-change device, THE ECONOMICAL MANDREL BENDING MACHINE FOR TIGHT BENDING RADII. For tube dimensions from 20 - 90 mm, this bending system offers solutions for complex geometries with standard radii of 2xD. Depending on material quality and wall thickness ratio, radii of 1.5xD can also be realized suitable for series production. With a tool height of 120 mm, there are also sufficient options for special profiles. The extremely precise and powerful electric drive of the bending axis as well as the stable and rigid construction of the mandrel carrier and the bending arm also contribute to the desired bending result. The plug-in bending tools allow a quick changeover to other tube dimensions. The clamping pressure for the tube clamping can be optimally adjusted. The PLC control (can be expanded as required via USB stick) with data memory and the latest X2X interface can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for a maximum of 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The control system has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. Also available with pneumatic rotation stop or with gear-assisted length and twist positioning. POSSIBLE AREAS OF APPLICATION: Gbjdpfxenh R Sue Afken - Plant engineering, e.g. chemistry - hydraulic piping - metal construction- prototype construction- pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mmbending capacity 9000: Ø 20 to 90 x 5 mm depending on the material- bending radius min/max: 40 mm/250 mm- Bending radii min: 1.5 x Ø (standard 2 x Ø ) - Multifunction machine control Bending angle adjustment (0,1°) - Mandrel support lengths 3000/4500/6000 mm - Maximum 180º bending result - Weight 1600-3200 kg (depending on version) - Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: - Automatic mandrel lubrication (minimum quantity) - Pneumatic or hydraulic quick chuck - Larger bending radius up to 300 mm - Positioning of the length and twist via automatic brake function or via manual stops by foot switch - Semi-automatic positioning of the length and twist via servo motors - Automatic tool retraction - Pipe calculation software - 10 inch touch screen with integrated tube calculation - Data transfer via cable (LAN), via radio (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via - the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ASSEMBLY. The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm stationary and directly at the assembly site. A powerful three-phase motor and a precision gearbox provide a powerful drive. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set quickly and easily via a convenient, menu-driven user interface with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback. With the aid of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The "stationary tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round bars can be bent without any problems.Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering- Hydraulic piping - Meander bending- prototyping- Sanitary and heating construction TECHNICAL DATA: Godjng Ax Sspfx Afkebn Bending capacity 6000S: Ø 6 to 50 x 4 mm alternating current 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm three-phase current 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm three-phase 400 V - Bending radius min/max: 36 mm/280 mm - Optional large bending radii up to 500 mm - Multifunction machine control Bending angle adjustment (0.1°) - Maximum bending angle 240 - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop - Weight 110 kg OPTIONAL ACCESSORIES: - Profile bender PB20 - for bending flat and square iron up to max. 100 x 10 mm, round iron up to max. 20 mm - Roller bender RB43 - The RB43 is placed on the 6-edge shaft of the bending axis. By switching over to endless bending, the bending system acts as a drive unit. - Small bending device KBV - Special tool according to specification OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via - Service contracts, maintenance at your site

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: SPE-Spero-LTX-340, The device was used for research purposes. SPE-Spero-LTX-340, MIR microscope with "Hyper Spectral Imaging" function; spectral coverage (1900 to 950 1/cm). Enhanced LowMag lens 4.0X; NA:0.3, 2.0mm FOV. Dedicated IR-transmission mode. Broadband 480*480 pixel microbolometer camera, including high-precision automated stage ( Godpfjyxc Twox Afkobn

Year of construction: 2026, condition: new, functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, laser power: 20 W, laser wavelength: 1,064 nm, scan area length: 110 mm, scan area width: 110 mm, type of input current: AC, laser type: fiber laser, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge - Fiber laser 20 Watt (Optional: 30 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with anti-trap protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm Gbodpfx Afjw Et Ilokjn - weight: approx. 45 Kg - low operating costs - marking of various materials

Year of construction: 2026, condition: new, functionality: fully functional, The universal LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be created with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers once they have been set. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer it to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. The LAS 28 XLe laser model can optionally be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Other options, such as lateral cantilevers for marking long parts, movable Z-axis, drawer systems, etc., can also be implemented. Programmable, software-controlled axes (X-, Y-, Z-axis) and database connection are also possible. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: autofocus system - system for automatically determining the focus distance - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) Gbodpfx Ajwkpvvofksn - Weight: approx. 120 Kg

Year of construction: 2026, operating hours: 1 h, condition: new, functionality: fully functional, overall weight: 560 kg, total length: 1,870 mm, total width: 1,040 mm, total height: 1,550 mm, compressed air connection: 6 bar, positioning accuracy: 0.01 mm, repeat accuracy: 0.01 mm, rotational speed (max.): 60,000 rpm, type of input current: three-phase, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality standards and guarantee the depaneling machine a long service life and high reliability. Made in Germany Semiautomatic depaneling - solutions on demand The LOW 4322 depanelling system enables fast product changeover while maintaining short depanelling and handling times. The insertion of the blank PCB is done with a parallel shuttle, pick-up and fixation with pin clamping technology and if necessary in combination with vacuum suction cups. This machine is equipped with: • a shank and disc tool separating module on Z-axis (automatically rotatable 0-90) • X-Y cross stitch module in linear motor technology with high resolution measuring system • 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors • Alu profil frame with two maintenance doors - left and right. Gedpext Dmxsfx Afkjbn • Standard vision system base module for teach-in programming (camera area 400 x 330 mm) • Working area is 420 x 330 mm • Automatic cutter length processing (only in combination with shank separation module) • Remote maintenance/support via remote connection (TeamViewer) or provided by the customer • Touch IPC with Windows operating system • Laser axis measurement incl. protocol • air ionization • Cutter breakage control for end mills only • Preparation for vacuum clamping technology • ESD window and sliding doors Optionally a vacuum cleaner unit can be offered later.

Condition: excellent (used), Professional electric motor from the renowned German manufacturer AC-Motoren GmbH. Robust construction designed for continuous operation in machinery, pumps, fans, gear units and other industrial equipment. The motor is in good visual and technical condition. Flange-mounting type B5. Shaft with keyway. Technical data: • Manufacturer: AC-Motoren GmbH • Type: FCA 112M-4 • Power: 4.8 kW • Power supply: 3~ / three-phase Gbsdey Rr Inepfx Afkon • Speed: 1440 rpm – 50 Hz • Speed: 1728 rpm – 60 Hz • Voltage 50 Hz: 380-420V / 660-720V • Voltage 60 Hz: 380-480V / 660-830V • Current: 8.36 A / 4.82 A • Cos φ: 0.82 • Operating mode: S1 • Degree of protection: IP55 • Standard: IEC 34-5 • Mounting: flange B5 • Shaft diameter: 28 mm • Shaft length: approx. 62 mm • Shaft with keyway • Aluminium housing Applications: • Pumps • Fans and blowers • Production machinery • Gearboxes and drives • Workshop equipment Condition: Used item, with normal signs of use and storage. The motor is in very good condition. Included: • Motor as shown in the photos

Condition: as good as new (ex-display), Year of construction: 2025, Briquette Diameter: 40 mm Power: 4 kW Press Output per hour: depended on material Hopper opening: 1.044 x 1.044mm Controlled by PLC Hydraulic tank: 100l Gsdpjvptrtefx Afksbn New exhibition machine with 5 operating hours

Condition: new, empty load weight: 4,000 kg, maximum load weight: 30,000 kg, overall weight: 34,000 kg, permissible axle load (axle 2): 34,000 kg, total length: 5,000 mm, total width: 2,000 mm, Year of construction: 2026, front tire size: 559, rear tire size: 559, load capacity: 30,000 kg, Heavy-duty transport trailer Payload: 30,000 kg on 60% of the loading area Dimensions: 5,000 x 2,000 x approx. 850 mm Tyres: 559 x 300 solid bandages Steering: Front axle with turntable steering Rear axle: Rigid Transport floor: 40 mm spruce, recessed and bolted Paintwork in RAL 2000 Drawbar with 40 mm towing eye and anti-fall device as well as height adjustment Gbjdpfx Ajiwlw Refken Double-acting wheel chock Welded lashing points, 4 per longitudinal side for load securing

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, Connection: 3.55 kW / 230 V / 50 Hz External dimensions (WxDxH): 945 x 830 x 1025 mm External dimensions (WxDxH, open): 945 x 830 x 1640 mm Weight: 60 kg Basket diameter: 600 mm Useful height: 380 mm Pump pressure: 2.2 bar Spray volume: 4,200 l/h Load capacity: 100 kg The soiled item to be cleaned is placed in the rotating wash basket and the lid is closed. After setting the desired washing temperature and time, the unit is switched on and the cleaning solution in the tank is heated. Inside the closed machine, the basket rotates at a constant speed around its own axis. The pump system draws the cleaning solution from the wash tank and feeds it through 6 stainless steel spray pipes equipped with overlapping flat jet nozzles. The item is thoroughly sprayed from all sides with hot solution during even rotation of the basket, which is driven by the jet action. After the cleaning cycle is complete, the unit shuts off automatically. Advantages: - 1 horizontally mounted pump - Flow rate: 70 L/min - 3 three-dimensional stainless steel spray pipes - Robust stainless steel construction - Additional small parts cleaning basket made of stainless steel (Ø 170 mm) - Rotating stainless steel wash basket driven by water jet - Steam extraction Gbedpfxsxiwc Se Afkon - Stainless steel perforated plate with filter inlets above the wash tank - Water shortage safety device

Year of construction: 2012, condition: used, functionality: fully functional, machine/vehicle number: 9332067, ROLLER CONVEYOR - CONSTRUCTION BLASTING SYSTEM MANUFACTURER: RUMP TYPE: 20-W 1500-4 Gjdpfx Afjy Entisksbn Manufacturer: Rump Type: 20W-1500-4 Year of manufacture: 2012 Please refer to the technical drawing for dimensions, as well as for the operating hours. Including filter unit, sound insulation, control cabinet, complete documentation, etc. TOP CONDITION This is a ready-to-use, pre-owned machine. Sale is made without warranty and without guarantee. Subject to prior sale and errors.

Condition: new, next inspection (TÜV): 09/2026, loading space length: 8,000 mm, loading space width: 2,000 mm, loading space height: 540 mm, total width: 2,000 mm, tire size: 23x9-10, tire condition: 100 %, color: orange, Year of construction: 2026, Platform transport trailer Payload 10,000 kg Loading platform length 8,000 mm Gbsdpfx Ajit Twuefkjn Loading platform width 2,000 mm Loading platform height 540 mm Transport floor: 30 mm Douglas fir, countersunk and bolted Lashing eyes: 5 units per longitudinal side Paint finish: RAL 2000 Tow bar with adjustable height and anti-drop safety Double-acting wheel chock Super elastic tyres 23x9-10 with steel rim and taper roller bearing All-wheel steering Track and steering rods with adjustable rod ends

Condition: as good as new (ex-display), Year of construction: 2025, Heavy-duty transport trailer with a payload of 8 tons on the loading area Dimensions 6000 x 2400 x 900 mm with turntable steering on the front axle and rigid trailing axle. Pneumatic tires 7.00-15 Overrun brake and parking brake on the steering axle Transport floor Wood 30 mm or for an extra charge of € 220.00 in 18 mm screen printing. A 1000 mm high front wall with 40 mm mesh in the direction of travel. Lashing points on the long sides for load securing Optionally with lighting system for an extra charge of € 980.00 with spiral cable as connecting cable, painted in RAL 2000 other colors if new we manufacture on request Godpfokzhqxjx Afkjbn

Condition: like new (used), empty load weight: 2,300 kg, maximum load weight: 20,000 kg, overall weight: 22,300 kg, next inspection (TÜV): 11/2025, loading space length: 5,000 mm, loading space width: 2,000 mm, tire size: 450x300, color: orange, Year of construction: 2025, operation weight: 20,000 kg, Heavy-duty transport trailer with dimensions 5000 x 2000 x 610 mm. Payload of 20 tons at 6 km/h. All-wheel steering with kingpin axles and adjustable track rods. Tyres: solid rubber 450 x 300 on steel rims with double-sided tapered roller bearings. Drawbar with forged 40 mm towing eye and fall protection. Transport floor made of 40 mm spruce, countersunk and bolted. Lashing eyes for load securing welded to the frame on each longitudinal side. Double-acting wheel chock mounted on the frame. Gjdjn D D S Sepfx Afkobn

Condition: new, empty load weight: 3,400 kg, maximum load weight: 30,000 kg, overall weight: 33,400 kg, loading space length: 6,000 mm, loading space width: 2,200 mm, tire size: 559x300, Year of construction: 2026, TPW 30 VL - LK Turntable steering front axle Trailing rear axle (rigid) Length: 6000 mm Width: 2200 mm Towing drawbar with drop safety and height adjustment Wheels: 559x300 solid rubber tyres with steel rims Gbedpohbmu Ijfx Afksn 5 stop blocks per longitudinal side for load securing Paint finish: RAL 2000 blue Transport floor: 40 mm recessed, bolted wooden platform #Heavy-duty transport #In-plant transport systems #Heavy-duty trailers 6–100 tons #Heavy-duty trailers from 3 to 100 tons #Heavy-duty transport platform wagons #Platform heavy-duty trailers #All-wheel steering #Transport carts

Year of construction: 2016, condition: new, functionality: fully functional, machine/vehicle number: 165092, Apple processing machine Apple processing machine (peeling, coring, slicing) ASETM Gjdpfx Ajzb Ew Nofksbn Processes 70-100 kg of apples per hour.

Condition: refurbished (used), Spako 225 litre electric heating, thermal oil Jacket vessel With strong agitator, scrape sides Tap discharge Piped to hot depositor for set weights and then clipped Complete system being refurbished. Gbjdjxwlk Hspfx Afkjn

Condition: excellent (used), I sell in very good condition TIG welder, L-TEC 200 DC. Price given for 1pc. Gbedpfx Afjud R T Sjksn

Condition: like new (used), Year of construction: 2022, operating hours: 11 h, functionality: fully functional, machine/vehicle number: 181070, Scope of supply for the overhead rail blast machine Blasting cabin: 100% manganese Transport system Y-rail: included Abrasive recovery hopper: included Automatic abrasive cleaning: included Automatic abrasive quantity control: included HMI: Siemens TP7 Remote access (via VPN): included Characteristics of the installed turbines Number: 2 units Drive power per turbine: 11.0 kW Speed control: included System characteristics Blasting tasks: surface finishing including cleaning, roughening, peening, derusting, descaling Workpiece designation: Various steel parts Coverage (%): depending on component Capacity (parts/hour): individual Abrasive (material and size): aluminum and aluminum-zinc abrasive or steel abrasive in various sizes possible Abrasive quantity (initial fill): approx. 1000 kg Gedpey Avh Nefx Afkjbn Workpiece material: steel Hook load: max. 450 kg Workpiece temperature: max. 80° C Workpiece height: 1300 mm Part diameter (min/max): 1100 mm Sound pressure level without soundproofing: approx. 85 - 90 dB(A) Optional offers: Dry filter including secondary filter EUR 18,880.00 Pipework 5m EUR 1,980.00 Technical data of the filter system: Type: dry filter Air flow capacity: 2,600 m³/h Filter surface area: 36 m² Residual dust concentration: ≤ 2.0 mg/Nm³ Residual dust concentration with after-filter: ≤ 1.0 mg/Nm³ Supervision and installation starting from EUR 3,500.00 The system is delivered in CE-compliant design. Exempted are linked systems or systems where essential components are added or modified by the customer. In such cases, AGTOS provides an installation declaration. Upon request, we are happy to send you a layout plan.

Condition: used, Year of construction: 1992, functionality: fully functional, power: 2,500 kW (3,399.05 HP), input voltage: 380 V, input current: 53 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 250 t, table length: 4,050 mm, year of last overhaul: 2007, Equipment: documentation/manual, We are offering this used Eisen u. Hammerwerk GmbH - EHT EHPS 25-40 press brake (hydraulic press brake, die bending press) for sale. Available immediately. Ready for operation. For sale due to new acquisition. Specifications: - 250 t pressing force - Cybelec DNC880S CNC control with Windows operating system (retrofitted in 2007) - Foot pedal control - Various upper tools in different lengths (segmented) - Lower tool (reversible die) in various lengths (segmented) - Hydraulic tool clamping - Support table for bent parts Technical data: - Machine type: EHPS 25-40 - Force: 2500 kN - Year of manufacture: 1992 - Working length: 4050 mm - Serial number: 207380 - Power supply: 3~ - Frequency: 50 Hz - Operating voltage: 380 V - Control voltage: 24/220 V - Rated current: 53 A - Main fuse rated current: 80 A - Circuit diagram number: 209-178/372 If you have any questions or require more information, feel free to send us a message or give us a call. Machine location at our premises: Pavic Fahrzeugtechnik Homberg GmbH Poschweg 2 34576 Homberg Relbehausen Germany Gsdoy D Sy Ropfx Afkjbn This is a non-binding offer. Subject to prior sale, errors and changes excepted.