Used Günther Pi 26 M for sale (73,027)

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for four-jaw chuck -Jaw width: 26 mm -Dimensions: see photo technical drawing -Quantity: 2 sets of interchangeable jaws available Dodpfx Aiezfgh Nexock -Price: per set -Overall dimensions: 110/105/H67 mm -Total weight: 5.4 kg/set

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, soft -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 90/80/H67 mm Dedpfxjzfgh As Aixsck -Total weight: 2.3 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 26 mm -Dimensions: see photo technical drawing Dodpfezfggrsx Aixsck -Overall dimensions: 110/80/H67 mm -Total weight: 2.8 kg

Condition: new, power: 235 kW (319.51 HP), fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), Iveco 180E32K Wheelbase: 3,690mm, New vehicle, not yet registered. 2-year factory warranty from initial registration. Color: White, Code 50105 IC 194, Transmission (9 gears), Euro 6, Ready for DELIVERY Following accessories: 00015 - Axle ratio 5.29, 00131 - Differential lock, 00166 - Rear bumper, tubular, 00541 - Battery disconnect switch, 08289 - Preparation for toll system, 05899 - Driver's seat armrest, right side, 00640 - Manual tilting roof, 07747 - Dirt-resistant interior, easy to clean, 00553 - Headlight protection grille, 02085 - Trailer socket for 24-volt operation, 00430 - Trailer version for towing, 05210 - ZF power take-off, 06319 - Air compressor 360 ccm, Dcodjyx N Iujpfx Aixsk 06403 - Tipper version, 00219 - Two wheel chocks, 00568 - Batteries 143 Ah, 00590 - Seat belts, 00632 - Sun visor, 00693 - Electric windows, 01483 - Preparation for PTO, 02096 - Heated dryer, 02181 - Central engine exhaust, 02211 - Warning triangle, 02463 - Cruise control, 02650 - Air conditioning with manual adjustment, 02662 - Anti-splash guards, 02688 - Heat-absorbing glass, 02714 - Electrically adjustable and heated exterior mirrors, 06150 - Rear cross member D - value 100 KN, 02912 - LDWS [Lane Departure Warning System], 02289 - Heated fuel filter, 04572 - Expansion module, 05456 - Exterior mirrors for body building .2500mm, 05534 - First aid kit, 06555 - Fog lights, 06620 - Comfort driver's seat, 06629 - Headrests, 06617 - Passenger seat, 2 persons, 06891 - Immobilizer, 07440 - Weight limits kg 7,500 - 12,000, 75181 - Audible reversing warning, 08277 - Heated urea tank, 08297 - EVSC [Electronic Stability Control], 75056 - LED daytime running lights, 01395 - Bluetooth radio, 75499 - Fuel tank 200 liters, 05267 - AdBlue tank 30 liters, 75502 - Air filter unit on the right at the rear of the cab, 77023 - EBS [Emergency Braking System], 06314 - Alternator 70°, 06318 - Air compressor 225 ccm, 20790 - Tires 315/80 R 22.5, 07700 - Jack, 02443 - Leather steering wheel with controls, 00191 - Radiator protection, 00160 - Front bumper, sheet metal, 00744 - Window behind the cab, 02210 - Spare wheel, 08554 - Semi-elliptic leaf spring suspension with trapezoidal spring on the rear axle, 08551 - Semi-elliptic leaf spring suspension with trapezoidal spring on the front axle. Emails will not be answered. If interested, please call us. Sales only to businesses or for export. Subject to prior sale and errors.

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: R-00620, load capacity: 260 kg, arm reach: 3,100 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC M-900iA/260L manufactured in 2012.12. The robot comes with an R-30iA B-Size controller including iPendant.   Dcedpfxozc E Haj Aixek Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-900iA/260L Model Number: A05B-1327-B503 Year of Manufacture Robot: 2012.12 Warranty term (months): 12   Payload (kg): 260 Reach (mm): 3100 Repeatability (mm): ± 0.3 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 1720   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2012.11 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10

Condition: used, mileage: 263,844 km, power: 338 kW (459.55 HP), first registration: 09/2007, fuel type: diesel, overall weight: 27,000 kg, axle configuration: 3 axles, color: yellow, gearing type: semi-automatic, emission class: euro4, Year of construction: 2007, Equipment: ABS, air conditioning, Internal vehicle number: VTC30034 Available immediately at our yard in Kaufungen. More information: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) MERCEDES BENZ ACTROS 2646 6x4 concrete pump Putzmeister BSF 36-4.16 Dodpfx Aiey Ngmiexsck Permissible total weight 27,000 kg 5 operating hours Final hose, max. 4 m Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, Year of construction: 2017, Operational condition SPI machine. Dcjdpfew Ty Rbsx Aixjk Ask for specification!

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: R-00617, load capacity: 260 kg, arm reach: 3,100 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC M-900iA/260L manufactured in 2012.12. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-900iA/260L Model Number: A05B-1327-B503 Year of Manufacture Robot: 2012.12 Warranty term (months): 12   Dcjdpjzcl Rrsfx Aixjk Payload (kg): 260 Reach (mm): 3100 Repeatability (mm): ± 0.3 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 1720   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2012.11 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10

Condition: used, maximum load weight: 1,995 kg, overall weight: 2,600 kg, axle configuration: 2 axles, first registration: 03/2026, loading space length: 2,760 mm, loading space width: 1,510 mm, loading space height: 300 mm, total width: 1,569 mm, total height: 642 mm, Rear tipper by manufacturer Unsinn, model WEB HK 2715-26-13. Gross weight: 2,600 kg, flatbed, open box, overrun brake, rear tipper with hand pump. • Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics • Anodised double-wall aluminium side panels • All side panels foldable and removable • Removable steel corner posts • Attachment options in all four corners for tarpaulin frames, mesh extensions, sidewall extensions, or front wall height extension • Recessed long lever locks • 3 mm fully galvanized steel floor – extremely robust • Drawbar and frame of hollow profile construction, welded and fully hot-dip galvanized • Numerous cross members for high point loading capacity • All cross and longitudinal members in contact with the floor • 6 folding lashing recesses, flush-mounted in the floor frame profile (600 daN/kg) • 6 lashing rings underneath the cargo floor • Sturdy 3-stage hydraulic cylinder Dcjdpfxjyn Uhwj Aixok • Manual hydraulic pump • Maintenance-free rubber suspension axles by ALKO • Automatic reverse function • ALKO overrun device and parking brake • 13-pin plug • Reversing light • Large, heavy-duty safety lighting • Integrated rear fog lamp • Recessed rear frame lighting • Centre-position jockey wheel with clamp bracket Errors and prior sale excepted.

Condition: used, maximum load weight: 2,217 kg, overall weight: 2,600 kg, axle configuration: 2 axles, first registration: 05/2025, loading space length: 3,660 mm, loading space width: 1,750 mm, loading space height: 350 mm, total width: 1,810 mm, total height: 930 mm, A46 GW260N0161390 High loader trailer manufacturer: Unsinn, Type: UH 3617-26-10, Gross vehicle weight 2,600 kg, overrun braked, 100 km/h, 10" aluminium rims, aluminium side wall... and much more. Product information: "Unsinn UH 3617-26-10", 100 km/h version, shock absorbers installed. Chassis: Unique, torsion-resistant longitudinal frame chassis for safe driving characteristics * Hollow section construction, welded and fully hot-dip galvanized Axles, braked model: AL-KO braking system Dedpfx Aoyqdtbeixjck Jockey wheel: Reinforced, automatic jockey wheel for safe parking of the loaded trailer, load capacity 500 kg Load securing: 8 foldable lashing recesses, recessed in the floor frame profile * 8 lashing rings under the loading surface * Vehicle not prepared Errors and intermediate sale reserved.

Condition: used, mileage: 250,672 km, power: 4,150 kW (5,642.42 HP), first registration: 09/2020, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, wheelbase: 3,900 mm, fuel: diesel, brakes: engine braking, color: grey, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 8,100 mm, total width: 2,550 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, fridge, lane keeping assist, parking heater, traction control, trailer coupling, = Additional Options and Accessories = Dsdpfx Aiozg U I Texsck - Remote-controlled central locking - Air suspension - Trailer hitch - Power take-off (PTO) - Radio - Sun visor - Lane keeping assist - Auxiliary heater - Toolbox = Notes = Palfinger Epsilon. Year: 2020 Type: S260Z96 = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Front Axle 1: Tire size: 385/65R22.5; Steered; Tire tread left: 60%; Tire tread right: 60%; Suspension: Leaf spring suspension Rear Axle: Tire size: 315/80R22.5; Double tires; Tire tread left inside: 40%; Tire tread left outside: 40%; Tire tread right inside: 40%; Tire tread right outside: 40%; Suspension: Air suspension Front Axle 2: Tire size: 315/80R22.5; Double tires; Tire tread left inside: 80%; Tire tread left outside: 80%; Tire tread right inside: 80%; Tire tread right outside: 80%; Suspension: Air suspension Weights Unladen weight: 14,629 kg Payload: 11,371 kg GVW: 26,000 kg Functional Crane: Palfinger Financial Information Price: On request Identification Model number: FH 540 6x4 / PALFINGER EPSILON 2 = Company Information = ALL PRICES ARE NET FOR EXPORT. (Joris Versteijnen NL-DE-GB, Wouter Greutink NL-DE-GB-ES-IT) We speak Russian. We make every effort to provide accurate information, but no rights can be derived from the information provided.

Condition: used, functionality: fully functional, machine/vehicle number: 906xxxxx, Year of construction: 2022, operating hours: 265 h, load capacity: 1,400 kg, lifting height: 5,350 mm, free lift: 1,761 mm, fuel type: electric, mast type: triplex, construction height: 2,250 mm, fork length: 1,150 mm, empty load weight: 1,156 kg, total length: 1,916 mm, drive type: Elektro, construction width: 800 mm, High-lift pallet truck Chassis number: 906xxxxx Load center: 600 Mast type: Triplex Transmission: AC impulse Condition: Refurbished, no warranty Technical condition: very good Front tire type: Polyurethane Front tire size: Load roller, polyurethane, single Rear tire type: Polyurethane Dodpfx Aezh Rmnoixjck Rear tire size: Drive wheel, polyurethane Battery voltage: 24V Battery capacity: 250Ah Battery manufacturer: Jungheinrich Battery type: PzS Battery year of manufacture: 2022 Description: Serviced, technically and visually refurbished, inspected according to UVV regulations, without warranty/liability for defects Impulse control, full free lift, CE certificate, lifting and lowering on both sides, display with discharge indicator and hour meter, ignition switch, turtle speed button, battery (04/2022) with Aquamatik, external charger included.

Condition: used, mileage: 442,442 km, power: 353 kW (479.95 HP), first registration: 07/2014, fuel type: diesel, axle configuration: 6x4, wheelbase: 4,800 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, suspension: steel, loading space length: 6,500 mm, loading space width: 2,420 mm, loading space height: 2,100 mm, Year of construction: 2014, Equipment: air conditioning, crane, electric window regulation, Suspension: leaf suspension Rear axle 1: Double wheels Rear axle 2: Double wheels Drive: Wheel Dcodpfx Aswfrtgsixok Empty weight: 14.910 kg Carrying capacity: 11.090 kg GVW: 26.000 kg Mast: telescopic (5 parts) Make of bodywork: PALFINGER PK23001 EH D = Additional options and accessories = - PTO

Condition: ready for operation (used), Siemens 1FU1050-6HF tacho 13.3 m/min SN: C-M26225, used, normal signs of wear, 100% functional, delivery as shown in photos Dcjdpfsx Dvbijx Aixsk

Condition: ready for operation (used), Siemens Teleperm M 6DS1001-8AA power supply E Stand 3 SN 40262-I 103B used 100% functional Djdexahv Depfx Aixsck

Condition: ready for operation (used), Heidenhain LS 106C Linear Scale ML 2640 mm Id. 295 712-33 SN:7486068C + AE LS 106 C Reader Head Id. 294 742 02 A, professionally fully overhauled and tested with 6 months warranty, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire separately for costs of packing and shipping! Dcedsx Er Dfspfx Aixjk

Condition: ready for operation (used), NUM FC 939970-B, 939 970 B 26, electronic module, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Dedpfxei Eb U Ue Aixjck

Condition: ready for operation (used), Supfina 808-262 carriage unit with base plate, used, in good condition, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire for charges for packing and transport separately! Dcedsxah Rhopfx Aixjk

Condition: new, GMN TSE 60 du X 315 - 6005 HF spindle / high-frequency spindle 1.8kW 6000rpm SN: R338157 with Georgii Kobold KOD 526 / XF / W / S215 / X motor 127 ID: 10 1357 0005 SN: 621774, unused in opened original packaging, 100% functional, scope of delivery as per photos. Dsdpfx Aey Nqameixeck

Condition: ready for operation (used), Siemens 6FC5303-0AF50-3DA0 Sinumerik MCP 434C-M Slimline 3 PIN DMG, serial number as shown in the photo, used, in good condition, 100% functional, scope of delivery as shown in the photos. Dcsdpfx Aei Ed D Tjixjk

Condition: ready for operation (used), DMU SK40 motor spindle with variable speed from 20-12,000 RPM. Serial number: 10222292. Used, shows significant signs of wear, but 100% functional. Scope of supply as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Dodok Ru Dkjpfx Aixjck

Condition: ready for operation (used), ITEM NO. FS 200504B 200 506 A 26 Power supply unit, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Dodpfxsi Eb U He Aixsck

Condition: ready for operation (used), Seidel 60WKS-M240/26-P0 servo amplifier SN, used, normal signs of wear, 100% fully functional, delivery as shown in the photos. Dcsdpfsx Eudzjx Aixok

Condition: used, maximum load weight: 1,995 kg, overall weight: 2,600 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 2,760 mm, loading space width: 1,510 mm, loading space height: 300 mm, total width: 1,569 mm, total height: 1,029 mm, Total weight: 2,600 kg, high-loader, open box, overrun braked, rear tipper with hand pump. Errors and prior sale excepted. Dedpfx Aioym Ig Djxsck

Condition: ready for operation (used), Year of construction: 2000, spindle speed (max.): 8,000 rpm, bar diameter (max.): 26 mm, number of axes: 7, This 7-axis Maier ML 26 C1 was manufactured in 2000. It features a maximum bar diameter of 26 mm and an impressive spindle speed of 8000 rpm. The machine includes 5 turning tools and 3 axial drilling tools, along with a bar feeder model Iemca Boss 322r-E. If you are looking to get high-quality turning capabilities, consider the Maier ML 26 C1 swiss type turning machine we have for sale. Contact us for further details. • Axis Head 1: • Axes: X, Y, Z, C • Z1 axis travel: 210 mm • Main spindle collet: 161E • Guide bushing: T227 • Tooling: 5 turning tools (16 mm), 3 axial drilling/boring tools, 3 ER16 live tools (up to 8000 rpm) Dodpfx Ajzdr H Ieixock • Axis Head 2: • Axes: X, Z, C • Sub-spindle speed: up to 8000 rpm • Sub-spindle collet: 161E • Back-working: 4 tools (currently set up with 1 turning tool and 3 ER16 live tools), plus 1 ER16 live tool axial with the sub-spindle • Maintenance (2025–2026): • Replaced all pneumatic lines with new, durable lines • Replaced position sensors in main spindle mechanical lock • Replaced position sensors in sub-spindle mechanical lock • Replaced position sensors in sub-spindle work ejector • Mechanical realignment and measurement of main spindle, guide bushing, and sub-spindle • Realigned sub-spindle frame assembly and sub-spindle back-working tools • Replaced all spindle bearings in sub-spindle assembly • Replaced spindle bearings in sub-spindle axial milling tool • Refurbished live milling tools on sub-spindle side Additional equipment • Bar feeder: Iemca Boss 322r-E, model year 2007, 17 mm guide channels Technical Specification Counter Spindle Yes Driven Tools Yes