Used Famu Parpas Vertical Machining Center for sale (70,027)

Condition: used, Year of construction: 1996, Technical details: x-travel: 762 mm y-travel: 510 mm z-travel: 560 mm control: Heidenhain TNC 415 OR 360 tool changer with: 21 place table clamping surface:: 865 x 510 mm table load: 455 kg tool taper: SK40 spindle revolutions per minute : 60 - 8000 U/min feed:: X/Y/Z; 15 000 mm/min rapid traverse : X/Y/Z: 24 m/min compressed air: Bedarf: 5,5 bar Total power requirement: 30 kVA motor capacity: Spindelmotor: 11,0 kW max. torque on the spindle: konstant: von 60 - 750 KN Weight approx.: 4,3 t dimension machine xH: 2,6 x 2,8 x 2,6 m dimension coolant device: L: 2,7 x B: 0,8 x H: 0,8 m Machining center with automatic tool changer IKZ and coolant supply through nozzles Chip and coolant tray Lubrication system through ball screws Manual control unit Heidenhain TNC 415 - dialog or according to ISO (machining cycles: deep hole drilling; tapping; slot milling; rectangular pocket and circular pocket milling; SL cycles), up to 100 programs in file management Duedpfx Asu Idmvjfkju Machine can be visited with pleasure under power. i.D. *

Condition: used, Year of construction: 1996, Technical details: x-travel: 2500 mm y-travel: 560 mm z-travel: 600 mm control: TNC 426 CA bore capacity in steel (diameter): 400 cm³/min Max. Milling-capacity: 400 cm³/min tool changer with: 34 Plätze Tool pull-in force: 12 kN spindle taper MT: SK 40 spindle throat: 580 mm Revolution per minute: 20...7500 steples U/min. max. torque on the spindle: 210 Nm distance spindle nose and table: 0 - 600 mm feed:: X/Y/Z = 1 - 24.000 steples mm/min. rapid traverse:: X/Y/Z = 24 steples m/min feed power: X/Y = 6 kN und Z = 8 kN kN table-size: 3300 x 500 mm table load capacity - central/maximum: 2500 kp interface: ja total power requirement: ca. 43 kW Weight approx.: 14,4 t dimension machine xH: 3,05 x 5,6 x 3,0 m dimension swarf conveyor LxWxH: 6.6 x 0,6 x 1,3 m VERTICAL DRILLING AND MILLING CENTER in travelling column design. with integrated coolant supply link belt chip conveyor MAN+HUMMEL with cooling water tank and pump cooling lubricant treatment ALLWEILER AG, size L:1550 x W: 1000 x H:1200mm; filter belt width 500mm; pressure 30bar Hydraulic unit Machining area can be partitioned, partition wall available Dedpfx Afevad Hpekeuu *

Condition: used, Year of construction: 2000, Technical details: x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm b-axis: manuell positionierbar ° c-axis: manuell positionierbar control: Heidenhain TNC 124 tool changer with: nein Plätze spindle taper MT: SK40 Revolution per minute: 4500 U/min. feed speeds infinitely variable: X/Y/Z: max. 14000 mm/min rapid traverse:: 5,0 m/min table-size: 700 x 500 mm total power requirement: 17 kVA Weight approx.: 2,91 t dimension machine xH: 2,0 x 2,0 x 2,5 m CNC universal vertical milling machine The machine has 5 axes. B- and C-axis manual with measuring system. B-axis table swivel -10° / +95° and C-axis table rotate 360° (not interpolatable, manually selectable via control). Cooling device (without pump) Operation via swiveling boom Dodsu Idffepfx Afkeuu *

Condition: used, Year of construction: 2001, Technical details: x-travel: 630 mm y-travel: 560 mm z-travel: 560 mm c-axis: Tisch 360° ° b-axis: Spindel=rechts:90/links=10° manuell ° control: Heidenhain TNC 430 MillPlusM table-size: 1000x600 mm table load capacity: 400 kg tool taper: SK 40 Revolution per minute: 20 - 12 000 U/min. feed speeds infinitely variable: x/y/z= 20 - 10.000 mm/min tool changer: 2 Magazine tool changer with: 12 place pro Magazin spindle hours: 21 212 h Dedpfsu Idgcsx Afkouu operating hours - idle run: 49 845 h total power requirement: 20,6 kW Weight approx.: 6,7 t dimension machine xH: 3,0 x 2,0 x 2,15 m Equipment: - AC motors for x/y and z-axis - Tool clamping hydraulic/mechanical - Chip conveyor with separator (screw conveyor) - seperately working indexing head Ø 300mm with manual control unit for B-axis table tilting -10° / +95° and C-axis table turning 360° (not interpolable, electric selectable via manual control unit) - Coolant unit 8 m³/h (dimensions: L:1,1 x W: 0,54 x H:1,2m) - control unit *

Condition: used, Year of construction: 1999, Technical details: x-axis: 800 mm y-axis: 500 mm z-axis: 510 mm control: Siemens 840D number of spindle speeds: 36 - 10000 U/min. tool changer with: 42 tools tool clamping: 12000 N tool taper: SK40 max. torque on the spindle: 102 Nm feed continuous: X/Y/Z: min./max.: 1/10000 / 1/10000 / 1-10000 mm rapid traverse: X/Y/Z: 40/40/40 m/min voltage: 400 / 50 V / Hz total power requirement: 70 kW HIGH PERFORMANCE DRIVING COLUMN - MACHINING CENTER Coolant system with paper band conveyor chip conveyor make Flender MC535/x=800 hydraulic aggregate make HAWE Loading system Promo cutting values: max. milling capacity=400mm max. drilling Ø 50mm Dujdpfsu Id Rbex Afkju max. thread Ø M30 1 motor each for main spindle 1 + 2: make Kessler; 21 kW; speed 15.000 rpm. 1 motor each for X / Y / and Z-axis: Make Siemens; for X/Y axis 14.0 Nm and Z axis 17.6 Nm torque; speed 3000 rpm. *

Condition: used, Year of construction: 1993, Technical details: x-travel: 400 mm y-travel: 300 mm z-travel: 400 mm spindle revolutions per minute : 8000 U/min Dedeu Idn Hjpfx Afkeuu control: Fanuc OM clamping table: 500x300 mm magazine slots: 16 Stück tool taper: SK40 distance work spindle /surface of the table max.: 50-450 mm numbers of pallets: 2 Stück/part total power requirement: 10 kW weight of the machine ca.: 2,5 t dimension machine xH: 2,4x1,8x2,5 m transport measurements machine: 2,45x1,8x2,5 m - E-cabinet - cooling device - chip conveyor manufacturer META (conveying height 1500mm; width 200mm) *

Condition: used, Year of construction: 2002, Technical details: x-travel: 1060 mm y-travel: 610 mm z-travel: 610 mm control: Ultimax 4 spindle speed:: 10 - 10.000 U/min tool taper: SK40 tool changer with: Trommelmagazin mit 24 Plätze places feed speed: XYZ: 3 - 7.000 mm/min rapid traverse:: XY: 30 m/min rapid traverse: Z: 20 m/min table-size: 1220 x 510 mm table load: 1,1 t air-pressure connection: für 6 bar bar Total power requirement: 30 kVA Weight approx.: 6,28 (ohne Anbauteile) t dimension machine xH: 2,82 x 3,2 x 2,7 m dimension swarf conveyor LxWxH: 3,0 x 0,65 x 1,5 The machine is currently in the technical department. delimited working area by chip splash guard cabin incl. cooling device with feeding (30bar internal coolant system) (size 1200x500x150mm) capacity for 340Liter spindle with internal coolant system Scraper belt chip conveyor control panel with two screens Duodsu Iddnopfx Afkeu Attention! Tool gripper arm for tool change is missing on the machine! Is on sale with this limitation! i.D. *

Condition: used, Year of construction: 2006, Technical details: x-travel: 1000 / 600 mm y-travel: 570 mm z-travel: 570 mm control: Fagor 8055 MC tool changer with: 24 Plätze tool taper: SK 40 Revolution per minute: 10 000 U/min. spindle taper: SK40 feed speeds infinitely variable: X/Y/Z: 10 m/min. rapid traverse:: X/Y/Z: 24 m/min. operating hours - idle run: nicht einsehbar h table-size: 1200 x 500 mm table load capacity: 800 kg distance spindle nose and table: min./max. 100/670 mm interface: 232 total power requirement: 15 kW Weight approx.: 5,0 t dimension machine xH: 3,3 x 2,3 x 2,8 m Equipment: -Cooling device with feed to the spindle (no CTS cooling through spindle)) -operating panel with manual control unit Duodju Idfrspfx Afkju -chip conveyor -E-cabinet cooling Rittal SK 3305500 *

Condition: used, Year of construction: 1998, Technical details: x-travel: 760 mm y-travel: 550 mm z-travel: 300 mm control: Röders RMS 6 Vers. 2.70 spindle taper ISO: HSK E40 turning speed range: 42.000 stufenlos U/min spindle head swivable left - right: -52 ° / +5° (B-Achse) ° feed:: 0 - 30.000 mm/min Tool changer: 18-fach Werkzeuge + 2 places for Werkzeugvermessung Table dimensions: 860 x 550 mm table load capacity: 800 kp Number of working hours: siehe Foto h compressed air: 6,5 bar total power requirement: 20 kW weight approx.: 7000 kg dimension machine xH: 3,1 x 2,4 x 2,6 m dimension coolant device: ca. 0,6 x 0,8 x 0,7 m other features: Highspeed direct spindle digital axis drives AC servo motors Dujdpfju Ndbpox Afksu ball screw spray cooling (microjet cooling jet and lubrication unit) working spindle Fischer MFW - 1230/42 up to 42.000 rpm tool measuring laser and probe system PS 25.00 Manual control unit Climatic cabinet Cooling water recooler Hyfra The machine can be demonstrated under power. *

Condition: used, Year of construction: 2007, Technical details: x-travel: 1200 mm y-travel: 600 mm z-travel: 800 mm distance spindle /table: 125 / 925 mm control: Heidenhain iTNC 530 number of spindle speeds: 9000 steples U/min. max. torque on the spindle: max.82 Nm switched on hours: 43363 h spindle hours: 16319 h tool changer with: 24 Plätze table-size: 1250 x 630 (Kreuzschiebetisch) mm max. table load: 1000 kg spindle taper MT: SK40 spindle drive: 13 kW feed range: X/Y/Z: 40/40/30 m/min rapid traverse:: X/Y/Z: 40/40/30 m/min feed power: X/Y/Z: 7/7/16 kN interface: ja total power requirement: 13 kW Weight approx.: 8,0 t dimension coolant device: ca. L:1,25 x B: 0,7 x H: 1,56 m Dusdpfx Aovithzjfkeu dimension machine xH: 2,4 x 3,0 x 3,3 m Main spindle: Spindle head DIN 69871, SK 40/DIN 69 871-A40 and pull stud DIN 69872 Drive technology via ball screw drive Equipment: Compact filter/coolant high-pressure system Knoll Chip conveyor/scraper belt conveyor 300mm Tool changing unit with disk magazine for 24 tools Electronic handwheel Operation via Heidenhain control panel Accessories: AL plate 1200x600x45mm with holes Ø 15mm *

Condition: used, Year of construction: 1987, Technical details: x-travel: 760 mm y-travel: 450 mm z-travel: 500 mm control: Mazatrol CAM M-2 tool changer with: 30 tools (Kettenmagazin) Plätze spindle taper MT: ISO 40 Revolution per minute: 28 - 4500 U/min. feed speeds infinitely variable: X/Y/Z: max. 2.000 mm/min max. torque on the spindle: ca. 23 Nm rapid traverse:: X / Y: 24 m/min rapid traverse:: Z: 15 m/min. bore capacity in steel (diameter): Ø 40 mm Dsdpfx Asvc Avbsfkeuu table-size: 500 x 1150 mm table load capacity - central/maximum: 700 kp total power requirement: 11 kW (24,4 kVA) kW Weight approx.: 6,8 t dimension machine xH: 3,7 x 2,5 x 2,6 m chip conveyor: L: 3,7 x B: 0,75 x H: 1,35 m ATC tool magazine for 30 tools up to Ø 100mm x 330mm, SK40 Hinged belt chip conveyor Knoll-120S-1 with ejection height of 1130mm Coolant tank with pump, 200liter capacity, 30 l/min. Operation via control panel with boom 2000mm. accessories: cooling lubricant pump Base plates *

Condition: used, Year of construction: 1990, Technical details: x-travel: 800 mm y-travel: 410 mm Duedpfxoy S T T Uj Afkou z-travel: 510 mm control: Fanuc 10 MA rapid travel x/y/z: 20/20/15 mm/min table surface area: 1100 x 450 mm tool taper: BT 40 tool magazin:: 30 BT 40 max. tool length: 250 mm max. tool weight: 8 kg power requirement: 7,5/5,5 kW turning speed range: 6000 1/min weight of the machine ca.: 6,3 t Under offer is a complete CNC tool shop, whioch will be given up due to old age of owner. The Mori Seiki is still highly accurate. All existing tool holders, tools, drills, etc. come with the machine. All measuring devices also come with the machine. Upon request orders for parts to be made can be passed on to new owner. This is a low cost all inclusive opportunity for a "Startup" *

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Dusdpfjtrhq Hsx Afkeu Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition Duodpfow Nklhex Afkeu

Condition: used, Year of construction: 2008, Table size 2000 x 760 mm X/Y/Z - 1740/760/660 mm Dedpfxszabilj Afksuu Spindle speeds 12.000 rpm No. of stations in tool changer 30 pcs. Spindle taper ISO 40 Max. table load 1400 kgs. Control: Mazatrol 640 M Equipped with: Rotary table as 4th. axis 10 tool holders Tool measuring system Chip conveyor

Condition: new, Year of construction: 2025, functionality: fully functional, NEWAY VM1050H FANUC 0IMF1 VERTICAL MACHINING CENTRE YEAR OF MANUFACTURE - NEW - BUILT 2025 STANDARD INCLUDED FACTORY FITTED MACHINE OPTIONS AIR GUN SPINDLE AIR BLAST SPINDLE PROTECTION AIR CURTAIN 24 STATION ATC TOOL MAGAZINE CHAIN TYPE CHIP CONVEYOR WITH CHIP BOX FANUC 0IMF 1 WITH 10.4 INCH COLOUR LCD DISPLAY & 8MB MEMORY MANUAL PULSE GENERATOR (MPG) COOLANT FLUSHING SYSTEM COOLANT GUN FRONT DOOR INTERLOCK FULLY ENCLOSED SPLASH GUARDING SYSTEM TELESCOPIC SLIDEWAY COVERS LED WORKING AREA LIGHTING SYSTEM PATROL LIGHT (3 COLOUR) AIR CONDITIONING IN ELECTRICAL CABINET BASIC MACHINE INSTALLATION PARTS CE STANDARDS MACHINE CONFIGURATION CENTRALIZED AUTOMATIC LUBRICATION SYSTEM MACHINE MANUALS & OPERATOR HANDBOOKS STANDARD ACCESSORIES TRANSFORMER (415V, 3PH, 50HZ) BELT DRIVE SPINDLE - 8,000 RPM #40 TAPER WITH OIL COOLER SPINDLE MOTOR FANUC 11.0 / 15.0 KW MACHINE TYPE, CONSTRUCTION & FEATURES  HEAVY DUTY CAST IRON CONSTRUCTION  COMPACT DESIGN  PRE-LOADED BALLSCREWS  HIGH PERFORMANCE LINEAR GUIDEWAYS – X / Y / Z MACHINE SPECIFICATION Worktable Travel (X Axis) 850 MM Saddle Travel (Y Axis) 520 MM Spindle Travel (Z Axis) 560 MM Distance from Spindle Nose to Worktable 150 ~ 710 MM Distance from Spindle Centre to Column 580 MM Dsdpfx Afsxtfxcoksuu FEEDRATES X Axis Rapid Traverse Rate 36 M / MIN 3 | Page Y Axis Rapid Traverse Rate 36 M / MIN Z Axis Rapid Traverse Rate 36 M / MIN Cutting Feed Rate 10 / 10 / 10 M / MIN ACCURACY Positioning accuracy (X / Y / Z) 0.008 / 0.008 / 0.008 MM Repeatability (X / Y / Z) 0.005 / 0.005 / 0.005 MM WORK TABLE Table Size 1,000 x 520 MM Max. Table Load 650 KGS T-Slots - Width 18 MM SPINDLE HEADSTOCK Tool Shank BT40 [BBT40] [CAT40] Pull Stud P40T-1 (MAS403) Spindle Speeds 8,000 RPM Max. Output Torque 70.0 / 96.0 NM Spindle Motor Power 11.0 / 15.0 KW AUTOMATIC TOOL CHANGER Number of Tools 24 Tool Shank BT40 Max. Tool Dimensions Ø 80 x 300 MM x 8.0 KGS Tool Exchange Time 1.5 SEC MISCELLANEOUS Power Requirement 25 KVA Power Supply 415V / 3PH / 50HZ Compressed Air Consumption / Pressure 280 L / MIN / 6 ~ 8 BARS Machine Dimensions (L / W / H) 3,680 x 2,480 x 2,850 Machine Weight 5,500 KGS

Condition: used, Year of construction: 2022, machine/vehicle number: 1371, functionality: unexamined, power: 10.3 kW (14.00 HP), travel distance X-axis: 3,200 mm, travel distance Y-axis: 920 mm, workpiece weight (max.): 75 kg, total height: 2,500 mm, total length: 3,800 mm, total width: 1,800 mm, overall weight: 2,000 kg, Vertical machining center, with Campus V7-EVO software, Campus Standard macro package, handheld control unit (for remote control of the machine), 21.5" flat screen monitor, keyboard with cable, 2D barcode scanner, laser workpiece length measurement, milling head 7830 with 6-position magazine (max. tool diameter 110mm), XL drilling head 1.7 kW (19 spindles), bevel gear unit 7869, workpiece support with infeed table, ECO vacuum system, automatic central lubrication, air conditioning unit for switch cabinet cooling. Please refer to the attached appraisal for details on the condition of the unit. Dusdpfszcm Ekex Afksu

Condition: excellent (used), Year of construction: 2006, Travelling-column vertical machining centre with linear motor X-axis Control: Heidenhain iTNC 530 (3D path) Travels: X 2,500 mm / Y 920 mm / Z 820 mm Spindle: 20 – 18,000 rpm · HSK taper Dsdpfxoy Skmrj Afkeuu

Condition: excellent (used), Year of construction: 2007, Haas VF5 Year of manufacture: 2007 Dusdpfsy S T Nvox Afkou X Y Z: 1270 x 660 x 635 mm Table: 1321 x 584 mm Spindle speed: 0 – 7500 rpm Gearbox Spindle taper: BT 40 Spindle motor: 20 hp 20-station tool changer Through-spindle coolant Includes Haas 4th axis Video available

Condition: used, Year of construction: 2007, travel distance X-axis: 610 mm, travel distance Y-axis: 455 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 24 m/min, controller manufacturer: Siemens, Equipment: rotational speed infinitely variable, Ref. 5.3-787 1 used vertical machining center Microcut Challenger MCV2418, year of manufacture 2008 CNC control Siemens 24-position tool changer chip tray Technical data: X-axis travel: 610 mm Y-axis travel: 455 mm Z-axis travel: 520 mm Spindle taper: ISO40 Spindle speed: 8000 rpm Table clamping area: 762x363 mm Tool magazine positions: 24 Weight approx.: 3200 kg Djdpfjwwi H Ijx Afkouu Technical data, accessories, and machine description are non-binding.

Condition: new, Main Motor Power 15/18.5 kW Table Size 2000x900 mm T-slot Size 5/22/165 mm Table Load Capacity (Max.) 1600 kg X, Y, Z Travel 1800, 900, 600 mm Spindle-Table Distance 112-712 mm Spindle-Column Distance 950 mm Spindle Speed 10,000 rpm, Direct Drive Spindle Taper BBT50 Spindle Diameter 190 mm X, Y, Z Rapid Traverse Rate 12/12/12 m/min X, Y, Z Motor Power 4.5/4.5/4.5 kW Dusdpjy T H Smofx Afksu Cutting Feed Rate 8000 mm/min Magazine Capacity 24 Stations, Arm Type ATC Max Tool Diameter 110/220 mm Tool-to-Tool Change Time 2.91 sec Control Unit Mitsubishi M80V - Fanuc 0i-MF PLUS Drive and Encoder Mitsubishi - Fanuc Main Motor Torque 143/236 Nm X, Y, Z Guideway Load Capacity 77.8/159 Nm X, Y, Z Guideway 55/45/Box Type mm X, Y, Z Leadscrew Diameter 55/55/55 mm Positioning Accuracy +/-0.006 Repeatability of Positioning Accuracy +/-0.004 Required Total Power 34.5 kW/40 kVA Machine Dimensions 5900x4300x3500 mm Net Weight 16,000 kg

Condition: ready for operation (used), Year of construction: 2003, X-axis: 1600mm, y-axis: 900mm, z-axis: 760mm, connected load: 38kVA, control: Ultimax, operating hours: approx. 50,000h, with CTS (coolant through spindle), Knoll AE 1058 coolant filtration and processing system. An on-site inspection is possible. Dodeza E Ryopfx Afksuu

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 220 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 720 mm, overall weight: 12,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 12,000 rpm, spindle nose: SK40, number of slots in tool magazine: 32, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMF 220 linear, manufactured in 2001 X-axis travel: 2,200 mm Y-axis travel: 560 mm Z-axis travel: 720 mm Control system: Siemens 840 D Spindle speed range - milling: 20 ~ 12,000 rpm Tool holder: SK 40 Drive power - milling spindle: 35 / 25 kW Tool magazine with 32 positions Table surface area: 2,600 x 600 mm Rapid traverse rate X-axis: 80 m/min Rapid traverse rate Y-axis: 50 m/min Rapid traverse rate Z-axis: 50 m/min Max. tool length: 300 mm Dodpfxozar Sqs Afkjuu Max. tool weight: 6 kg Max. table load: 2,200 kg Chip conveyor IKZ-40 bar Renishaw OP60 Total power consumption: kW Machine weight: approx. 12 t Space requirement: approx. 7.0 x 4.2 x 2.7 m

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, CNC Vertical Machining Center “BRIDGEPORT VMC 800” With Heidenhain TNC 410 path control Year of manufacture: 2000 Travel ranges: X 800 Y 500 Z 500 Spindle speed range: 0 – 10,000 rpm, stepless With the following accessories: Fixed angle table 1000 mm x 500 mm clamping surface Dujdpeypb Rhofx Afkou Vertical tool changer with 20 tool magazine slots (SK 40) Fully enclosed safety cabin with sliding doors and internal lighting Various SK 40 tool holders Electronic handwheel Coolant system with reinforced 20 bar pump Chip conveyor Operating manual

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 700/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] - Cutting feed rates (X/Y/Z) : 1-30000 [mm/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 850 x 410 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 2165 X 2087 [mm] - Machine height : 2345 [mm] - Machine weight : 2000 [kg] MACHINE HOURS Djdox Tvizspfx Afkouu - Number of working hours : 3207 [h] EQUIPMENT - CNC : Fanuc 31i model B5 - 3 colors status lamp DIVIDING UNIT * manufacturer : Häberle * model : DTTiB * travel 4th axis : 360 [°] * indexing precision 4th axis : 0.001 [°] * travel 5th axis : -7/+100 [°] * indexing precision 5th axis : 0.001 [°] * tightening type : Pneumatique - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor : ARRIERE - Tool probe : Renishaw - Workpiece probe : Renishaw - Electric transformer - Milling vice - Tool-holders