Used Esterer = Ewd Guides for sale (4,500)

Condition: used, Linear unit, linear axis, portal axis with servo drive, synchronous servomotor, electric slide, loading unit, linear guide with servomotor and pneumatic gripper REXROTH INDRAMAT Type: MKD0771B-061-KP1-KN Identification No. 247238 0001 Bwjdpfx Asgi E Hasfkep Year of manufacture: 2000 Axis travel: 2400 mm Slide length: approx. 500 mm Overall length: 3520 mm - pneumatic feed clamp (clamping device with 2 Festo pneumatic cylinders) - standard linear guide 65 x 25 mm - base profile made of steel - ball screw Ø 32 x 10 mm - pneumatic, with position indicator - permanent magnet servomotor Type: MKD071B-061-KP1-KN (Part No: 261989, Serial No. MKD071-50234, brake with 24 Volt DC) Overall dimensions L x W x H: 3520 x 400 x 580 mm Weight: 340 kg good condition possible drive controllers under stock number 53628 and stock number 53673

Condition: used, Linear guide, portal axis SCHNEIDER ELECTRIC / FESTO Electric slide Motor type: ILS1B571PC1A0 Year of manufacture: 2010 Axis travel: 300 mm Bwedpfjw Uc Tzjx Afksp Power supply: 36 Volt (DC) Carriage: 86 x 54 mm - Synchronous servo motor / stepper motor SCHNEIDER ELECTRIC, type: ILS1B571PC1A0 - Linear guide FESTO, type EGSK-33-300-6P - Ball screw Ø 10 mm, pitch 6 mm - 2 adjustable position sensors Dimensions L x W x H: 580 x 120 x 57 mm Weight: 6.5 kg in good condition

Year of construction: 2010, condition: good (used), Siemens Advia Centaur XP Analysis System With Siemens Healthineers services and maintenance until 02/2022 Advanced AE immunoassay technology Meet clinical needs with acridinium ester (AE) technology that provides the flexibility and sensitivity needed for new and innovative assays. Comprehensive diagnostic clarification of various disease patterns thanks to a test menu with over 70 different assays. Simplified inventory management and reduced costs by using the same ready-to-use reagents on all ADVIA Centaur analysers. Bodpehr Rw Ijfx Afkewp Simplified operation, continuous operation All samples, reagents and consumables can be loaded and unloaded on the fly. Easier training and operation thanks to an intuitive, icon-based user interface. Less operator intervention as daily maintenance is low and the system does not need to be cleaned monthly or booted up daily. New and updated test definitions can be read in by the customer by simply scanning the 2D barcodes included in the usage information. Consistent, predictable turnaround time (TAT) and accuracy Up to 240 tests/hour for short turnaround time even during peak periods. Rapid prioritisation of emergency samples possible at any time thanks to a dedicated access (STAT port). Disposable pipetting tips prevent carry-over and contamination of samples. Automatically perform repeat and confirmatory testing for reactive hepatitis B surface antigen samples using Siemens Healthineers SMART algorithms. Direct connectivity Adapt to different sample volumes with easy connection to Aptio and VersaCell® X3 automation solutions. Efficient operation thanks to diagnostic IT including CentraLink® data management system Atellica Process Manager and Smart Remote Services for Diagnostics Direct pipetting from the automation solution through point-in-space technology. Shorter turnaround times for emergency samples thanks to a dedicated STAT port that allows front loading of emergency samples even when connected to an automation solution. Technical specifications Product specifications System type: Random access immunoassay system Throughput: Up to 240 tests per hour Time to first test result 18 minutes, further results every 15 seconds (method dependent) Method capacity on board: 30 test methods Indication groups§§ Allergy, anaemia, diabetes, fertility, hepatitis, HIV, immunosuppressants, infectious serology, cardiology, Bone metabolism, Liver fibrosis, Adrenal function, Oncology, Thyroid diseases, Sepsis, Therapeutic drug monitoring (TDM) Continuous operation Loading and unloading of samples and consumables at any time during continuous operation. This includes sample racks, emergency samples, reagents, ancillary reagents, reaction cuvettes, sample tips, calibrators, controls, wash solutions, water and waste. Samples and sample management: Sample tubes 3 ml, 5 ml, 7 ml and 10 ml tubes, 1 ml and 2 ml secondary tubes, micro tubes Financing through our bank is also available. komplett-konzept.leasingo.de Find more items—new and used—in our shop! International shipping costs available upon request!

Condition: new, 4 new DEMAG rope guides P200 P400 P600 P1000 Bedpfx Afoyyvggjkjwp new

Condition: new, Lot of 12 DEMAG rope guides Bwsdpfx Afoyyvbkekep 3x DH300 / DH400 82280233 3x DH500 / DH600 82380233 3x DH1000 / DH1200 82480233 3x DH1600 / DH2000 82565033

Condition: used, Measuring machine with hand-guided measuring arm, STIEFELMAYER High-precision measuring and marking plate, made of cast steel/grey cast iron, heavily ribbed Machine No. 22890285, Year of manufacture 1985 Length 2500 mm Width 1500 mm Thickness 350 mm Plate thickness (top) 50 mm, solid material with 300 mm ribs Working height approx. 800 mm - Measuring arm can be manually moved, measuring range X=1970 mm, Y=815 mm, Z=840 mm - With 3-axis digital display Grundig MZ 1030 Bsdpfekdnwbex Afkswp - 5 adjustable feet Space required L x W x H 2500 x 1500 x 2500 mm Weight 3000 kg Very good surface finish

Condition: used, Internal threading machine, Hagen & Goebel, type HG 124 Machine No. 4112, Year of manufacture approx. 1980 Threading capacity in steel: M3 to M10 Threading capacity in cast iron: M3 to M15 Threading capacity in brass: M3 to M17.5 Overhang: 250 mm Tailstock travel: 80 mm Bodpehgnd Asfx Afkjwp Table size: 345 x 245 mm Spindle speed: 200 - 1000 rpm Motor power: 0.55 / 1.0 kW Power supply: 380 Volts, 50 Hz - 6 speed stages via belt change (3 stages via belt + 2 motor speeds) - Thread pitch via lead screw - 2 lead screws with 0.8 mm and 28 threads per inch - Table height adjustment with rack and pinion via hand crank on the round column - Spindle mount with taper Ø 14.8 to 16 mm - Gear-type drill chuck Ø 1 to 13 mm Space requirement L x W x H: 900 x 500 x 1800 mm Weight: 260 kg Good condition

Condition: used, Offer 41414 Bedpexhfhmofx Afkewp Guide unit for punching tool suitable for AMADA type EMK 3612

Condition: good (used), Year of construction: 2000, machine/vehicle number: 6535, Offer 25230 Hydraulic Twin-Column Guided Bandsaw Machine Technical Specifications: - Automatic operating cycle for the cutting process, hydraulic lifting/lowering of the saw frame - Manual mitre adjustment with hydraulic clamping Bwodpfxsw I Scfo Afksp - Automatic material feed unit, motorized mitre adjustment - Saw blade dimensions: 4400 x 34 x 1.1 mm - Infinitely variable cutting speed: 15 – 150 m/min - Infinitely adjustable cutting pressure: 10 – 15 bar - Feed rate: 0 – 300 mm/min - Cutting range at 90° – Max round: 335 mm – Max square/flat: 500 x 335 mm - Automatic material feed: 5 – 2300 mm - Drive: 400 V / 6.5 kW - Space requirement (approx.): W 2400 x H 1950 x D 2200 mm - Weight (approx.): 1800 kg

Condition: like new (used), functionality: fully functional, Ferwood code: RS0003586 - Manufacturer code: CXSM20-75 - Condition: As new (ex-demo item) - Functionality: Fully operational - Compatible machine: - If interested, we offer overhauling service, please contact us. Bwjdpfx Afjyrn U Eokep 1KG - 20X20X20

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003498 - Manufacturer Code: 4-006-10-1513 - Condition: As new (display item) - Functionality: Fully operational - Compatible Machine: - If interested, we offer an overhaul service; please contact us. 1KG - 20X20X20 Bwodpsymd Uwefx Afksp

Condition: excellent (used), functionality: fully functional, DEMAG P2000 / P1600 25t Main hoist motor 36/24 K6P 36/20 K6P, fine travel FG 35, wire rope guide, rope drum, drum shell, hoisting gearbox Bjdpfsv Uvvfsx Afkjwp Significantly below manufacturer's list price Top condition Also suitable for P1000 / P1200 P600 P400 P200 Info: We have over 20,000 DEMAG spare parts in stock! Over 20,000 DEMAG spare parts in warehouse! Be sure to check my other offers from stock!

Condition: refurbished (used), Dear customers, we currently offer idler rollers and drive rollers for profile belt grinding machines made by F. Zimmermann. The rollers have been newly coated with a more robust material for improved durability, then ground to a convex shape, and fitted with new bearings. Bedpfx Aod S Eb Ajfkowp You will therefore receive fully refurbished rollers in exchange for your defective rollers! The rollers are suitable for the following machine types: Zimmermann PS0, regardless of year of manufacture Zimmermann PS1, regardless of year of manufacture Zimmermann PS1/2, regardless of year of manufacture Zimmermann PS S, regardless of year of manufacture When placing an order, please always specify the machine type and indicate which rollers you need and in what quantity. We have everything in stock and can deliver quickly. If you have any further questions, please do not hesitate to contact me!

Condition: new, Made in Italy. Maximum turning height: 300 mm Turning diameter over bed: 600 mm Turning diameter over slide: 380 mm Distance between centers: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Bjdpfxod Nk Nco Afkowp Spindle nose: Camlock 8" Spindle speeds: (12) 16 - 1200 rpm Motor power: 9.2 kW (optional equipment / standard: 7.5 kW) Feed rate, Z-axis: (93) 0.028 - 6.43 mm/rev Feed rate, X-axis: (93) 0.012 - 2.73 mm/rev Threads, metric: (54) 0.5 - 224 mm Threads, Whitworth: (55) 72 - 1/8 TPI Threads, module: (54) 0.5 - 112 mm Threads, diametral pitch: (54) 64 - 1/4 D.P. Cross slide travel: 340 mm Top slide travel: 150 mm Tailstock ram diameter: 85 mm Tailstock ram travel: 200 mm Tailstock taper: MK 5 Weight: approx. 3,200 kg Equipment: - 3-axis digital readout - Automatic lubrication of the guideways - LED lighting - Micrometer bed stop - 9.2 kW motor instead of 7.5 kW - Quick-change tool holder system Multifix with 4 inserts - Tailstock movement pneumatically assisted - Mechanical dual clutch - Electromagnetic brake - Rapid traverse for X and Z axes - Electrical equipment made of high-quality brand components, e.g., Siemens/Schneider - Lubrication of the guideways via hand pump - Reducing sleeve - 2 fixed centers - All safety devices according to CE standards: chuck guard with Plexiglas panel, secured by microswitches. Tool holder guard with Plexiglas panel. Rear splash guard over the entire length. Lead screw and feed screw protection by light curtain (integrated into the emergency stop circuit). Emergency stop button. - Chip container on wheels - Electric coolant system - Fixed steady rest - Follower steady rest - Operating tools, acceptance test report according to DIN, operating and maintenance manual, complete electrical installation, machine manufactured according to CE standard in the latest version EMO special price including 3-axis digital readout.

Condition: good (used), Stock number: 3056 Manufacturer: EK Automation Project: EKA1201703A Vehicle: Linde L14 LD4-1GH-13 Machine number: W41173H03734 Year of manufacture: 2017 Operating hours: Drive: Electric Lifting capacity: 1.25 t Overall height: 3,250 mm Bedpfxox Hrv Rj Afkowp Lifting height: mm Fork length: 1,150 mm Tyres: SE Mast: 2,900 mm Battery: 24 V Accessories: Charging station Condition: Good Own weight with battery: 1.56 t Battery weight: 290 kg Dimensions: 2,300 x 850 x 3,250 mm

Condition: good (used), Guide plate 1,000 x 400 mm Height: 90 mm Bwedpogqpn Sefx Afkop Weight: 80 kg

Condition: new, Year of construction: 2026, Vertical Bandsaw with Laser Guide A simple-to-use bandsaw with a durable construction. It allows for precise adjustment of work parameters, which directly impacts cutting efficiency. The quick tensioning lever is also used for quickly removing the blade. Precise cast iron machine table. Adjustable table tilt from -10° to 45°. A window for easy reading of the blade tension. Two cutting speeds selected via a stepped pulley. Technical Data: Wheel diameter [mm]: 480 Maximum cutting height [mm]: 280 Maximum cutting width [mm]: 465 Blade width [mm]: 9.5 to 38.1 Blade length [mm]: 3605 Bsdpfx Afovugwaekewp Belt speed (2 speeds) [m/s]: 7/14 Worktable angle adjustment [°]: from -10 to +45 Worktable dimensions (L x W) [mm]: 630 x 480 Dimensions (L x W x H) [mm]: 830 x 550 x 2070 Weight [kg]: 162 Motor power [kW]: s1-2.2kW, s6-3.1kW Power supply: 3-phase, 400V Note: The price quoted is the net price. It does not include transportation costs.

Condition: new, Year of construction: 2026, The CORMAK HBS421 wood band saw is designed in a vertical configuration, allowing convenient material guidance across the table and enabling both straight and curved cuts. In production environments, rigidity is crucial—therefore, the body and main structural components ensure stable wheel alignment and, consequently, smooth and accurate blade tracking. Drive Wheels and Blade Guidance In professional band saws, cutting quality largely depends on the geometry of the blade guidance system. Properly selected drive wheels ensure correct blade operation along its entire length, reduce slippage, and limit localized overloads. In practice, this results in: Reduced vibration at higher feed rates Improved edge quality—especially in harder wood species Extended blade life thanks to stable operation and correct tension Worktable and Angle Adjustment The worktable provides material support and cutting repeatability. In the CORMAK HBS421 wood band saw, both stability and adjustment capability are essential, allowing for angled cuts. This solution is particularly valued in carpentry workshops where quick transitions between different operations (sizing, structural component preparation, trimming) are required. Drive System and Continuous Operation The band saw drive system is designed for load-intensive operation, while the three-phase power supply enhances smooth running and torque stability. As a result, this vertical wood band saw maintains cutting performance even when processing thicker materials—an important factor in serial production. Adjustable blade speeds allow optimization for specific tasks, reducing edge burning and improving cutting control. Dust Extraction and Workstation Ergonomics Cutting wood generates significant amounts of dust and chips. The integrated dust extraction port enables connection to an extraction system, which significantly improves: Work safety (reduced airborne dust) Visibility of the cutting line Service life of working components by limiting dust accumulation Precision and Productivity In industrial practice, it is not only the ability to cut material that matters, but also maintaining repeatability. The rigid construction, stable blade guidance, and controlled blade tension ensure straight cuts and reduce the need for corrections in subsequent processes (planing, sanding, fitting). As a result, the CORMAK vertical wood band saw supports shorter production cycles and minimizes material waste. Standard Equipment High-voltage release switch Dust extraction port 2 × 100 mm Precision rip fence Cutting blade 3345 × 20 mm, 8 TPI Optional Equipment 100 mm extraction hose Galvanized clamp Mobile base (up to 260 kg capacity) Technical Specifications Wheel diameter [mm]: 480 Maximum cutting height [mm]: 240 Maximum cutting width [mm]: 405 Blade width [mm]: 9.5 – 38.1 Bwjdpfx Afsyk Apnskep Blade length [mm]: 3345 Blade speed [m/s]: 7 / 14 Table tilt range [°]: 0 to +45 Table dimensions [mm]: 535 × 435 Overall dimensions [mm]: 830 × 550 × 2070 Weight [kg]: 160 Motor power: S1 – 2.2 kW / S6 – 3.1 kW Power supply: 3-phase, 400 V Manual (DTR): Yes CE Declaration: Yes

Condition: new, Year of construction: 2026, The CORMAK HBS321 vertical wood band saw operates in a vertical configuration, providing the operator with full control over guiding the material across the worktable. A key component is its rigid frame, which maintains the geometry of the wheel and guide system. This ensures smooth blade tracking and consistent cutting accuracy. In practice, this means a lower risk of blade drift—particularly important when cutting harder wood species or working at greater cutting heights. 350 mm Wheels and Blade Tracking Control Cast Iron Worktable and Angle Adjustments The band saw features a 545 × 400 mm worktable, providing adequate support for workpieces—essential for precise straight and angled cuts. The table tilt range of 0–45° allows for bevel cuts without the need for additional attachments. The cast iron construction effectively dampens vibrations, helping maintain stable operating parameters. Drive System and Operating Parameters This woodworking band saw is equipped with a motor rated at 1.1 kW (total power), ensuring stable performance for typical carpentry tasks such as ripping, trimming, preparing components for gluing and assembly, and contour cutting. The use of blades with widths ranging from 6–15 mm allows the operator to select the appropriate blade depending on the task—from precise curved cuts to stable straight-line cutting. Laser – Enhanced Control and Reduced Material Waste The integrated laser guide supports quick material alignment and accurate cut tracking. In practice, this reduces the need for test cuts, minimizes material waste, and makes working with detailed elements (e.g., profiled components or shaped cutouts) easier and more efficient. Bedpfx Afeyk Alijkswp Precision and Work Efficiency In professional applications, repeatability is just as important as cutting capability. The rigid construction, stable table, and quick blade adjustment system reduce machine setup time and limit the need for corrections during subsequent processing stages (planing, sanding, fitting). As a result, the CORMAK HBS321 band saw supports smooth workflow and improves overall process efficiency. Applications The HBS321 wood band saw is designed for a wide range of woodworking and wood-based material applications, including: Cutting boards, squared timber, beams, and glued elements Trimming furniture and carpentry components Angle cutting (using the tilting table) Cutting shapes and profiled elements Workshop use in carpentry shops, craft businesses, and training facilities Technical Specifications Wheel diameter [mm]: 350 Maximum cutting height [mm]: 175 Maximum cutting width [mm]: 300 Worktable dimensions (L × W) [mm]: 500 × 400 Table tilt [°]: 0 to +45 Blade width [mm]: 6 to 15 Blade length [mm]: 2240 Blade speed [m/s]: 6 / 12 Overall dimensions (L × W × H) [mm]: 750 × 650 × 1730 Gross weight [kg]: 88 Motor power [kW]: S1 – 0.75 kW / S6 – 1.1 kW Power supply [V]: 230 Manual (DTR): Yes CE Declaration: Yes Standard Equipment On/off switch with low-voltage release Quick blade tension/release lever Precision rip fence Cutting blade 2560 × 10 TPI 6.3

Condition: as good as new (ex-display), different Schölly Flexilux fiber light guides - Ringlight - Gooseneck - single arm Prices from € 100,-- single) to € 350,-- (ring) prices are EXW, bulk discount possible Bedpfx Aofr T Ihjfkjwp

Condition: good (used), These pallet guides for your pallet racking systems ensure that pallets, wire mesh containers, and bins are stored safely and securely on each racking level. Simply integrate the robust pallet supports into your racking system. For frames with a depth of 1100 mm and a crossbeam thickness of 50 cm. Also available: ideal for frame depths of 1910 mm and 1410 mm. Type: right-hand, left-hand, and center position. Bwsdsg Dcp Djpfx Afkjp It is perforated so that it can be attached to the crossbeams. If you need racking or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used racking, as well as accessories, and will be happy to assist you with your planning. Other accessories available, such as: Frame, corner, and end protectors, push-through guards, chipboard, grating, back panel grids, and deep profile uprights. Shipping: Please inquire about the shipping costs, providing your postal code and location, as well as the desired quantity of items. Other service offerings: Planning, racking assembly/disassembly, buying/selling. Changes and errors in technical data, specifications, and prices, as well as sales subject to change without notice!

Condition: good (used), It is ideal for frame depths of 1100 mm. Bwodehpxufepfx Afkjp Other sizes are shown in the pictures. If you require shelving or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelving, as well as accessories, and will be happy to assist you with your planning. Additional accessories available, such as: frame, corner, and impact protection, push-through guards, chipboard, grating, rear wall grating, and deep shelf supports. Shipping: Please inquire about shipping costs, providing your postal code and location, as well as the desired quantity of items. Additional service offerings: Planning, shelving assembly/disassembly, purchase/sale. Changes and errors in technical data, specifications, and prices, as well as sales subject to change without notice!

Condition: new, Year of construction: 2026, functionality: fully functional, 1.86 m Roller Conveyor with Measuring Guide – Precision Roller Table for Cutting and Transporting Metal Materials The 1860 mm roller conveyor with an integrated measuring guide is an advanced solution for supporting material cutting and feeding in industrial settings. Thanks to its high load capacity, sturdy construction, and precise length measurement system, this conveyor is perfect for use with band saws, circular saws, and other metalworking machines. Seven steel rollers ensure smooth movement of workpieces of various shapes and sizes. Key Features Built-in measuring guide – precise length control without the need for additional tools 7 steel rollers (60 × 360 mm) – even weight distribution and smooth transport High load capacity of 900 kg – suitable for heavy pipes, profiles, bars, and shafts Adjustable height (650–1100 mm) – easy integration with different machines Modular extension capability – for building multi-segment roller tables Construction and Technology The CORMAK roller conveyor is made of deformation-resistant steel profiles. Stability is ensured by reinforced legs with crossbars. Each of the seven rollers is mounted on ball bearings, providing smooth and secure material guidance. The integrated measuring guide with a scale allows for quick length setting without the need for additional stops or measuring instruments. Precision and Work Efficiency The roller table with a measuring guide significantly shortens material preparation time by eliminating the need for manual measuring of each piece. Thanks to the precise measurement system, repeatable production can be carried out with high accuracy. Accurate material positioning improves cut quality, reduces material waste, and enhances workplace safety. Applications Bwsdpfx Aexp Iy Ujfksp The 1.86 m roller conveyor with measuring guide is designed for production facilities, metalworking workshops, and companies involved in steel structure prefabrication. Especially recommended for: Precision cutting of pipes, bars, and steel profiles Operation with band saws and circular saws Feeding and receiving parts during batch processing Creating linear transport systems Standard Equipment 7 steel rollers with ball bearings Steel frame with cross reinforcements Height adjustment system (650–1100 mm) Integrated measuring guide Adjustable leveling feet Technical Specifications Roller diameter 60 mm Roller length 360 mm Number of rollers 7 Conveyor length 1860 mm Conveyor width 450 mm Height adjustment range 650–1100 mm Maximum load capacity 900 kg Weight 50 kg

Condition: good (used), Late model APC turret saw. Has been cutting frozen loins into chops. Bsdpfx Afjtq A Nxokjwp

Condition: new, IG 280 SD Specifications Motors Grinding Spindle Motor 20HP, 200 - 2330RPM Rotary Table Motor 1HP, 5 - 70RPM Servo Column Motor 2KW Coolant Pump 3/4HP, 45GPM Table Diameter 24" Table Features Thru-spindle vacuum/pressure feed Variable strength 3/4" fine pole electromagnetic chuck Custom Table Options 18" diameter T-slot or drilled for customer fixtures Contact a DCM Technical Specialist for other custom table & fixturing options Capacity Max Swing Diameter 27" Max Part Height 11" with a segmented wheel 12" with a 2A2T wheel Grinding Wheel Options Segmented Wheel Hub Kits 12" or 15" diameter 2A2T Ring Wheel Hub 12" diameter 6A2 Wheel Hub 8" diameter Cortland Chuck 12" or 15" diameter Ask a DCM Technical Specialist about our wide variety of available abrasives Feed System Servo driven Z-axis with precision ballscrew and encoder Feedrate variable from 0.0006 IPM to 0.1000 IPM AC motor driven Y-axis Electrical Requirements 230V, 50/60Hz, 3 phase Consult DCM Technical Specialist regarding operation on other voltages Dimensions 80" wide, 68" deep, 90" high Weight Machine & Swarf System: 5,480LBS. Electrical Box: 960LBS. IG 280 SD Features Bsdpfxeubbp So Afkowp • 24" variable strength electromagnetic chuck with auto demag cycle • 20HP variable speed grinding spindle motor • Thru-spindle vacuum/pressure feed • Integral air mist collection and coolant flow systems for clean and consistent grinding • Programmable touch screen HMI controls • Manual pulse generator for precise Z-axis positioning • Internal memory for saving grind process recipes to aid in quick changeover • Password protection and operator lock-out features • Automatic routine maintenance reminders • 76" x 64" Footprint