Used Eht Press Brake for sale (29,119)

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Hsdpsmck Ryofx Ac Tjt Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Hedpfx Acjxpqy Ds Tot Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Press brake with 6-axis backgauge and CYBELEC control Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Hsdpfjya Iaqsx Ac Tet Table height above floor: 840 mm Backgauge X-axis: 620 mm travel Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working traverse: 1-10 mm/s Y return: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electric foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm - Tool system TRUMPF, without tools Space requirement (L x W x H): 0 x 2500 x 3400 mm Machine transport height: 3360 mm Weight: 17,000 kg Good condition

Condition: like new (used), Year of construction: 2001, functionality: fully functional, pressing force: 85 t, stroke length: 365 mm, table length: 2,100 mm, clearance between the columns: 540 mm, overall weight: 9,050 kg, Equipment: CE marking, safety light barrier, The following 2 metre Trumpf press brake featuring the specific extended daylight configuration. The machine is in exceptionally clean, near-mint condition. This is largely because it is being sourced from an immaculate, highly regulated factory that manufactures components exclusively for the medical sector. Used Trumpf V series cnc pressbrake for sale Trumpf v85 2m x 85ton – 4axis cnc pressbrake / with Extended daylight and stroke Make: Trumpf Model: v85 Year: 2001 Total axis: 2axis back gauge / total axis 4 – y1 y2 x r and i axis Crowing Complete with: • Extended stroke and daylight: 365mm maximum stroke / 535mm daylight • 2axis back gauge • i axis – bottom base moves to use twin multi v without operator moving or changing the tooling Hedpfszfp D Tex Ac Tot • Fully serviced / Good condition Delivery to your works, installation and tuition with your operators available.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, pressing force: 85 t, stroke length: 445 mm, overall weight: 8,600 kg, operating pressure: 300 bar, control voltage: 24 V, TECHNICAL DETAILS Control system: TASC 6000 Pressing force: 850 kN Stroke: 445 mm Operating pressure: 300 bar Follow-up time: 95 ms Follow-up travel at 220 mm/s: 10 mm Follow-up travel at 160 mm/s: 8.5 mm Equipment: 4-axis rear stop, bending aid MACHINE DETAILS Safety clearance: 190 mm Voltage: 3 x 400 V Rated current: 24.0 A Frequency: 50 Hz Connected power: 17.0 kVA Control voltage: 24 V Hsdpfxszlc Rye Ac Tjt Compressed air connection: 6 bar Dimensions & Weight Dimensions (L x W x H): 2,500 x 1,500 x 2,000 mm Machine weight: 8,600 kg Note: The operating hours can be found in the last image.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, pressing force: 100 t, stroke length: 215 mm, table length: 4,100 mm, Equipment: CE marking, High quality fully serviced Bystronic 4metre cnc pressbrake for sale PR100 100 x 4100 Make: Bystronic Edwards Pearson Model: PR 100 Pressure Reference Year / new: 2005 Total axis: 4 – 2axis back gauge X R – complete with 2 additional fingers on the back gauge, 4 fingers in total. With built in hemming table for producing sheet metal flashings or safety edges on sheet metal Hydraulic crowning Free standing no pit required Capacity / bed size / tonnage: 4metre x 4100mm x 100ton Cnc control: Cybelec Modeva 10S control Max stroke 215mm Rapid approach 180mm/s Hodpjzdgnnsfx Ac Tjt Bending cycle 10mm/s Rapid return 150mm/s

Condition: used, Year of construction: 2011, Fully functional Hodpszd Tlrsfx Ac Tet

Condition: used, Year of construction: 2005, Used 3.6-meter CNC press brake by Ermaksan Type: AP 3600 x 200 Hedjzh Icyepfx Ac Tjt Capacity: 3600 x 200 tons Elgo NC control system 1 set of tooling Year of manufacture: 2005

Condition: excellent (used), Year of construction: 1999, 6-axis press brake Location available upon request. Hjdpfxsznipue Ac Tst

Condition: used, Safan 120-4300 TS-1 CNC Pressbrake Year 2004 Pressing Force 120 Ton Bending Length 4,300 mm Distance between Uprights 3,600 – 3,700 mm Maximum Stroke 180 mm Open Height (Table to Ram) 510 mm Hedpfx Acozdgnbe Tst Throat Depth 400 mm Table Width 160 mm Main Motor Power 7.5 kW Control System Safan TS-1 CNC Number of Controlled Axes Typically 4 Axis (Y1, Y2, X, R) Electrical Supply 400V / 3 Phase Machine Weight Approx. 11,700 – 12,300 kg Machine Dimensions (L × W × H) Approx. 4,500 × 1,650 × 2,900 mm

Condition: good (used), Year of construction: 1995, power: 4 kW (5.44 HP), pressing force: 35 t, throat depth: 300 mm, total length: 2,100 mm, total width: 1,500 mm, total height: 1,800 mm, overall weight: 1,900 kg, distance between stands: 1,350 mm, Bending length 1600 mm, capacity 35 to, gap between column 1350 mm, stroke 150 mm, throat gap 300 mm, motor 4 KW, back gauge 500 mm motorized, dimension 2100x1500x1800 mm, weigth ca. 1900 kgs Hjdpfx Aszula Aec Tjt

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, power: 26 kW (35.35 HP), pressing force: 230 t, stroke length: 470 mm, throat depth: 400 mm, clearance between the columns: 2,550 mm, total width: 3,750 mm, total height: 3,750 mm, overall weight: 16,200 kg, Equipment: CE marking, Hydraulic press brake Manufacturer: DARLEY, Type: EHP-LS 230.31/25 Year of manufacture: 2003 Technical data Manufacturer: DARLEY Type: EHP-LS 230.31/25 Year of manufacture: 2003 Capacity: 230 t Usable length: 3,100 mm Distance between uprights: 2,550 mm Stroke: 470 mm Installation height: 700 mm Upright overhang: 400 mm Motor power: 26 kW Oil tank capacity: 200 liters Weight: 16.3 t Dimensions: Width 3,750 mm x Depth 2,700 mm x Height 3,550 mm (plus 200 mm for the control arm) Equipment • Control system: Delem DA-66W • Automatic Wila/Trumpf tool clamping system + tool holders (top and bottom) • Controlled axes: Y1, Y2, X1, X2, R1, R2, Z1, Z2 • CNC-controlled crowning • Lazersafe safety light curtain (front) • Rear safety guard via door/grille • 2 adjustable support arms • • Tool set: Top tool: straight, H 158 mm, R3, 28°, 100 t/m, 3000 mm, segmented Top tool: slightly bent, H220 mm, R1, 86°, 2000 mm, segmented Hodpfszmi Hqex Ac Tst All information is subject to change without notice. A demonstration is possible at any time in our showroom.

Condition: new, functionality: fully functional, Energy-efficient, precise, and fast press brake Driven by servo motors and ball screw Bending length: 1300 mm Press force: 40 t Stroke: 150 mm Comparable to Durma, Baykal, Ermaksan, Trumpf, Amada, etc. Installation height: 375 mm X-axis travel: 440 mm X-axis speed: 1000 mm/sec R-axis travel: 150 mm R-axis speed: 100 mm/sec Hjdoq D Dv Depfx Ac Tjt Y-axis positioning speed: 150 mm/s Bending speed: max. 20 mm/s Retraction speed: 150 mm/s Motor power: 2 x 3.8 kW Machine length: 1880 mm Machine width: 2435 mm Overall height: 2320 mm Machine weight: 3400 kg Standard equipment: European clamping system (Promecam) at the top 60 mm die holder at the bottom Stable X + R axis back gauge, CNC-controlled 2 pcs. back gauge fingers, manually adjustable on linear guide Foot pedal with emergency stop button Including the following options: DA66T control system Fiessler AKAS 2M laser finger protection + FPSC Safety PLC (manual) 1 set of upper tooling for the entire bending length: Angle (°): 85° H: 104.65 R: 0.8 Max T/m: 100 Material: C45 1 set of lower tooling for the entire bending length: Type: Multi-V die (4-way) Angle (°): 85° H: 60 V: 16 - 22 - 35 - 50 Max T/m: 80 Material: C45

Condition: like new (used), Year of construction: 2014, Advertisement description CATALOG NO. 6526 TECHNICAL SPECIFICATIONS - track width 300mm - shaft width 300mm - max blade diameter 350mm - disc bore diameter 70mm - max cutting height 120mm FROM TOP: - 2 rows of ratchets - smooth pressure shaft, sliding - pawls - smooth, slipping, pressing roller - saw shaft - 3 smooth pressure, slipping shafts Bottom: - guide - pawls - track - infinitely variable speed feed Hedpeudhzyofx Ac Tet - main motor 45kW - feed motor 1,5kW - central lubrication - diameter of the extraction stub 180mm - dimension of table top 1900x870mm - dimensions L/W/H 2540x1520x1600mm - weight 2000kg - possibility to check on the spot purchase and transport

Condition: ready for operation (used), Year of construction: 2001, year of last overhaul: 2025, We are offering this used TRUMPF TrumaBend V320 press brake, manufactured in 2001. Manufacturer: TRUMPF Model: TrumaBend V320 Year of manufacture: 2001 Condition: ready for use Category ID: 1295 Type ID: 1717 Machine type: Press brake Standard equipment: - Upper drive concept with two-cylinder design Y1/Y2 - electro-hydraulic ram drive with proportional valve technology - ram stroke measuring system with spring compensation via glass scales - modern block hydraulics - spherical suspension and inclination of the pressure beam - CNC back gauge system - safe front finger adjustment - 2 pcs. back gauge fingers - self-centering, manual, hardened upper tool holder for vertical tool change Hsdpsznxidefx Ac Tot - hardened, manual lower tool holder - program-controlled lower tool displacement (I-axis) for 2 positions - flat front cover - modern protective cover - CE marking - Operating manual - No bending tools Optional equipment: + CNC crowning + Back gauge system, 4 axes + Upper tool clamping, hydraulic and hardened + Lower tool clamping, hydraulic If you have any questions or need further information, please send us a message or call us.

Condition: ready for operation (used), Year of construction: 2021, machine/vehicle number: 2108338, functionality: fully functional, stroke length: 210 mm, throat depth: 410 mm, working width: 3,700 mm, bending force (max.): 175 t, distance between stands: 3,200 mm, The machine was in use for only 3 years! The original price was €95,000! TECHNICAL DETAILS Bending force: 175 t Working width: 3,700 mm Stroke: 210 mm Throat depth: 410 mm Distance between columns: 3,200 mm X-axis travel: 750 mm Operating speed: 10 mm/s Return speed: 130 mm/s Number of axes: 4 Type of crowning: Motorized Backgauge adjustment: CNC-controlled Backgauge: 750 mm MACHINE DETAILS Control system: ESA S660W Dimensions & Weight Dimensions (L x W x H): 5,305 x 2,430 x 2,840 mm Total weight: 9,800 kg Power: 15 kW (20.39 HP) Input voltage: 400 V Input current: 30 A Input frequency: 50 Hz EQUIPMENT CE marking Finger guard Foot remote control Emergency stop switch Upper tool Lower tool Hsdoydc H Tepfx Ac Tst Safety light curtain European tool clamping system

Condition: good (used), Year of construction: 1991, Used squaring shear from Haco Type TS 3012 Capacity: 3050 x 12 mm Adjustable back gauge Blades recently sharpened Hodpfx Aozhbgljc Tjt

Year of construction: 1993, condition: ready for operation (used), Max. working length: 2600mm, max. pressing force: 700kN, stroke: 8-60mm, connected load: 8kW, weight: 4.5t, with documentation. Hjdpfxopcgy Ae Ac Tst

Year of construction: 1992, condition: ready for operation (used), Working length: 4300mm, pressing force: 2000kN, connected load: 15kW, weight: 18t, including tools. Hodoi Dx Sbjpfx Ac Tst

Year of construction: 2001, condition: ready for operation (used), Max. pressing force: 1000kN, max. working length: 3100mm, throat depth: 250mm, connected load: 18kW, weight: 9.5t, operational hours counter: 76,566h, with accessories and documentation, was maintained regularly. Hodpfxolzizme Ac Tst

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, operating hours: 50,000 h, Equipment: CE marking, documentation/manual, Trumpf TruBend V200 bending cell + BendMaster 60 Year of manufacture: 2004 Maximum pressing force: 2000 kN Maximum stroke: 365 mm Hsdpfx Acszrxfaj Tst Maximum operating pressure: 340 bar 1 unit B0401A0009 = BendMaster 60 1 unit B0106A0073 = TRB V200-6A 1 unit protective enclosure including lighting 1 unit BendMaster track, 14 meters in 2-meter segments 1 unit Trumpf system control

Condition: good (used), Year of construction: 1997, machine/vehicle number: 887043, Offer 24557 Technical data: - max. working length 4060 mm - column clearance 3680 mm - max. pressing force 1700 kN - max. distance table / ram 385 mm - column projection 410 mm Hedpeu T Nknefx Ac Tjt - ram stroke 215 mm - stroke speeds - downward speed idle max. 200 mm/sec - upward speed 135 mm/sec - downward pressing speed 1 to. 11 mm/sec - Total drive power 30 kW - Space requirement approx. W 5600 x H 3000 x D 2400 mm - Weight approx. 18000 kg - with: - with 6-axis CNC control DELEM - Two-hand control panel with foot switch - Crowning device - Controlled back stop with height adjustment 5 - 860 mm - Hydraulic upper + lower tool clamping - Die table displacement pneumatically supported

Year of construction: 1990, condition: used, machine/vehicle number: 22752; Lg-Nr. 12106, Technical specifications: - Pressing force 2000 kN - Max. working width 3100 mm - Distance between uprights 3200 mm - Upright overhang 300 mm - Max. installation height 965 mm - Stroke, or pressing depth, continuously adjustable 0 - 400 mm - Plunger speed, forward and return strokes, each 100 mm/sec - Working speed selectable in 9 stages, from 1 to 10 mm/sec - Drive 400 V / 26.5 kW - Space requirement approx. W 4400 x H 3500 x D 2200 mm - Weight approx. 18500 kg - Including: Hjdpfx Acjbbwzno Tot - CNC control CYBELEC ModEva 15S, year of manufacture 2007 - Rear stop with 4 controlled pneumatic side stops and height-adjustable stop fingers - Controlled bending aids in the stop area - Hydraulic-pneumatic clamping of the upper and lower tools - Motorized crowning / hydraulic cushion in the table - Laterally movable support arms - E-stop foot pedal - Split top tool R 1-100 t/m, split die

Year of construction: 1990, condition: good (used), machine/vehicle number: 59502, Item No. 22564 Technical data: - Pressing force: 150 t - Working width: 2600 mm - Clearance between columns: 2100 mm Hodpsin I Nbofx Ac Tjt - Table width: 180 mm - Overhang: 250 mm - Installation height: 325 mm - Drive: 400 V / 7.5 kW - Space requirement: approx. W 3000 x H 2400 x D 1600 mm - Weight: approx. 7000 kg - Includes: - Two-hand control panel with foot pedal

Condition: good (used), Year of construction: 2006, machine/vehicle number: 91426, Offer 25227 Technical specifications: - Pressing force: 150 t - Working width: 3600 mm - Clearance between uprights: 3150 mm - Table width: 180 mm - Throat depth: 250 mm - Installation height: 325 mm - Approach speed: 70 mm/sec - Working speed: 7 mm/sec - Return speed: 60 mm/sec Hjdpfxewvih No Ac Tst - Ram stroke: 120 mm - Adjustable backgauge range: 120 mm - Motor power: approx. 7.5 kW - Oil capacity: approx. 300 l - Space requirement: approx. W 3850 x H 2300 x D 1600 mm - Weight: approx. 8700 kg Includes: - Swivel arm – operator panel with ATL 550 control - For pressing depth & backgauge - Motorized backgauge - Crowning device - FIESSLER Lasersafe - 4-way universal die, segmented punch tool & “gooseneck” die - Two-hand operation desk, foot pedal,