Used Chiron Fz 22 L High Speed for sale (89,103)

Condition: used, Year of construction: 1968, Donau high-speed radial drill type DR 32 Fjdex Hgkvopfx Afksgc Speed: 60 - 1800 rpm Arm reach: 600 mm Base plate: 100 x 1400 x 110 mm Thread cutting device Coolant system Machine lamp Quick-change holder with inserts Machine vice

Condition: used, WEBSTER & BENNETT EV 36” HIGH SPEED VERTICAL BORER MAKE WEBSTER & BENNETT, MADE IN ENGLAND MODEL EV 36” TABLE DIA 915 mm SWING 1168 mm HEIGHT UNDER RAIL 533 - 1016 mm SPEED 13.5 - 300 rpm FEED RATE 0.005-0.250 inch/min MAIN SPEED 40 HP PLUS HIGH SPEED TAABLE EV SERIES MACHINE ELEVATING RAIL SAFETY GAURDING SET OF JAWS Fgsdpfjxp Na Nox Afksc FULLY FUNCTIONAL GOOD SLIDES

Condition: used, Single-column hydraulic press EXNER Type EEX 20 S - Machine no.: 1615 Year of manufacture: 1980 - Pressing force: 20 tons - Throat depth: 180 mm - Table size: 380 x 350 mm - Table opening: Ø 50 mm - Ram surface: 310 x 250 mm - Clamping shank: Ø 35 mm - Ram stroke: 100 mm - Max. installation height: 250 mm - Table height above floor: 900 mm - Descent speed: approx. 480 mm/s - Return speed: approx. 480 mm/s - Working speed: 20 mm/s - Hydraulic tank capacity: 110 liters - Hydraulic operating pressure at 20 tons: 200 bar - Motor output: 4 kW - Power connection: 400 Volt, 50 Hz - Stroke release via two-hand control or light barrier - Operating modes: setup, two-hand operation, BWS Fgjdpfx Aeyz Dtdsfksc - SICK light curtain, type LVU, with single- and double-stroke settings and safety function - Rapid approach and working stroke - Stroke limitation dependent on pressure or travel - Mechanically adjustable solid stop - Press force adjustment manually via knurled wheel - Control cabinet mounted on the side of the machine - Operating manual and electrical schematics included - Stroke counter - Space requirement (L x W x H): 1250 x 750 x 2000 mm - Weight: 1.4 tons In good condition

Year of construction: 2015, condition: excellent (used), Hobart high speed steamer Fodpfx Afefv Spcoksgc Model: 305GB Serial: 97-0215-148 2015, high speed steamer cooks 42 portions of salmon in 1 minute or 66 portions of tenderstem broccoli in 30seconds, offering exceptional accelerated cooking techniques, LED display, auto defrost, 27Kw, on mobile tray cooling rack, 3Ph

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, - Pressure washer PTC TORPEDO MINI-E 3.8 M 230/50 Powersteam and TORPEDO MINI-E 5.8 T 400/50 Powersteam similar but no Dynajet, Oertzen, Falch, ... - cold water / hot water / steam 32 bar up to 140°C / high pressure steam 150 or 200 bar up to 150°C for cleaning and disinfection The following models are available: - TORPEDO MINI-E 3.8 M 230Volt/50Hz Powersteam 8 l/min. at 150 bar - TORPEDO MINI-E 5.8 T 400Volt/50Hz Powersteam 8 l/min. at 200 bar Fgodpfsfh Skaox Afksc - Dimensions and empty weight : 110x64x98cm, approx. 150kg - incl. 10 m high pressure hose, spray gun, lance and flat jet nozzle 25°.

Condition: refurbished (used), Repair of speed control board Fgodpfx Asy Rfzusfksc

Condition: new, maximum load weight: 29,071 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,680 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Farikneuer Schmitz SCS 24/L Speed Curtain Expected to be available end of February * Load securing: body certified according to EN 12642 XL * with beverage certificate * with Daimler 9.5 certificate * Spare wheel holder basket version for 2 wheels * Wheelbase 7,700 mm * 1st axle liftable * Schmitz axles with air suspension and disk brakes * Lifting and lowering device * Jost landing gear * LED reversing lights * 6 tires 385/65R22.5 * 30 pairs of lashing eyes in the outer frame * Plastic tool box * Pallet box * 28 mm plate floor Fedpfsvw Hkrox Afkegc * Fire galvanized chassis * Tarpaulin color RAL 9010 pure white Example pictures For further information please do not hesitate to contact us

Condition: used, Year of construction: 1994, High-speed radial drilling machine Donau Danuflex145 Fgedowtq Dyjpfx Afksc

Condition: good (used), Machines pictures 1 to 9 Gillardon price 9500,-€ Technical data: - Drilling capacity into solid steel ST 60 32 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 27 - Drill spindle holder MK 4 - Quill stroke 150 mm - 12 drill spindle speeds 102 - 2000 rpm - 3 drilling feeds 0.1 - 0.3 mm - min. / max. distance spindle - table 310 / 610 mm - Drilling radius min / max 400 / 1200 mm - Table height 720 mm - Table size 1200 x 500 mm - Drive 400 V / 1.6 / 2.9 kW - Space requirement approx. W 1200 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the rear side of the machine Machine 2 pictures 10 to 15 HKS 34 MT Price 16.500,-€ Fgjdeu Nm Niopfx Afksc Drilling capacity 45mm Table size : 1200 x 560 mm drilling capacity 45mm Spindle holder MK 4 quill stroke 170mm Speed / steps 70-2000 rpm Feed rate / steps 0.1 0.2 0.3mm/rev Motor 2.9 KW

Year of construction: 1976, condition: good (used), machine/vehicle number: H 76-467, Pressing force: 160 kN Ram stroke: 100 mm Installation height: 350 mm Hole in the table: 100 mm Ram bore: 32 mm Stand passage: 650 mm Fodjflrhzspfx Afkogc Table size: 630 x 400 mm Hydraulic pressure: 280 bar electr. Connection: 380 V, 5.5 kW Space requirement: 1550 x 1050 x 2400 mm Weight approx .: 1,2 t

Condition: excellent (used), Superb condition, currently part of line in production with robotic top load machine picking cereal bars which are then loaded into this machine. Videos of line are available upon request. Can be seen running until near end of August 2023 Fedpfx Asnmv Rajfkegc

Condition: good (used), Year of construction: 2001, The machine will be delivered including a new replacement spindle. Digma HSC 500, year of manufacture 2001, Heidenhain iTNC 530 control, travel X/Y/Z 500/400/350 mm, spindle speed up to 42,000 rpm, tool holder HSK 40, laser diameter measurement, oil mist lubrication system, extraction for graphite machining, 3D infrared measuring probe, Fgodey A H Tpjpfx Afksc The tool cannot be released from the spindle; according to the service technician, this is not a spindle problem but a hydraulic issue. A new HSC replacement spindle is included.

Condition: good (used), Year of construction: 1985, spindle turning speed - stepless 26 - 1650 U/min voltage 380 V 0 50 Hz rated current 15 A connected load 6,5 kW tool taper MK 4 weight of the machine ca. 2,3 t dimensions of the machine ca. 1500 x 1200 x 2500 mm Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 15 A Fgsdpfxevylh Uj Afksc Connection: 6.5 kW Automatic feed: 0.05 - 0.45 mm/rev Column lifting speed: 40 mm/s Column stroke: 450 mm Drilling spindle stroke: 200 mm Drilling zone: 430 - 1150 mm Height adjustment of the drilling spindle: 330 - 780 mm Tool holder: MK 4 Table dimensions: 1525 x 560 mm Table height: 800 mm

Condition: like new (used), Year of construction: 2023, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 2022LW160, High-speed roll forming line, equipped with tooling for the production of GELAN and SCHUCO metal profiles used in PVC window frame manufacturing. Machine achieves speeds up to 55 m/min with 6 m profile length production. Maximum processable material thickness is 2.5 mm. Upper and lower shaft diameter is 60 mm, the width between the stands is 360 mm, and each station is driven by an individual gearbox with two cardan shafts. Both upper and lower shafts are driven at each station. The line features 15 forming stands plus two straightening stands (Turkish heads). All forming rollers have a surface hardness of 62 HRC. Additionally, all auxiliary rollers and shafts in contact with the material are induction-hardened to 58–62 HRC (including run-out table rollers and horizontal accumulator rollers). A flying cut servo positioning system (DELTA 7.5 kW servo motor, ball screw, and linear guides) facilitates precise length adjustments via HMI. Hydraulic cutting system included. The run-out table features an automatic profile kickout, conveying, and separation system for continuous production without stopping. The horizontal entry accumulator for strip material ensures uninterrupted production, equipped with pinch rollers and individual drives. Double-sided hydraulic decoiler included. The line is equipped with a continuous ink-jet marking system from KONING (Germany). The automatic stacking system is not installed (see photos). The machine features recirculating cooling and lubrication across all 15 stations. Electronics: SIEMENS (PLC, contactors), SCHNEIDER (contactors), DELTA (Taiwan drives and servo). Main electric motors by Siemens. Bearings by SKF. The mechanical frame is stress-relieved and milled for precision. The machine has only been used for test production, having processed just 250,000 m of material (machine is nearly new). It is installed and connected to power; test runs can be arranged on-site. The listed price refers to the machine disassembled and loaded onto a truck. Included is comprehensive documentation with detailed tooling setup instructions for each profile (including detailed assembly drawings of rollers). Model: LW160 Supply voltage: 380 V Installed power: 73.5 kW (consumes only 40% of power when processing 2 mm strip) Fedpfxoyw Rzas Afkegc Frequency: 50 Hz Weight: 16,500 kg Current: 160 A Serial number: 2022LW160 Year of production: 2022 Year of on-site assembly: 2023

Condition: used, Year of construction: 2003, Fully functional ready to use. Please check out our other listing as well Fedpfxowt R Dmj Afkjgc

Condition: used, HASEGAWA PM 250 is a CNC‑High speed milling machine for precision machining with high accuracy and reliability. Capacities: table 300×260 mm; travels X100 Y225 Z200 mm; table load 80 kg; spindle‑to‑table 140–340 mm. Specs: 100–30000 t/min; spindle nose SK32; rapid traverse 30 m/min; spindle motor 3.0/4.5 kW; 3x400 V 50 Hz; 12 kVA; weight ~2000 kg; dims 1750×600×1800 mm. Accessories: Renishaw probe, set of toolholders, coolant 120 l, oil mist extractor Mebaron, tool break control, status light. Delivers tight tolerances; typical sectors: automotive, watchmaking, machine tools, aerospace, medical. Fgsdpjyxnzaefx Afksc

Year of construction: 1999, condition: good (used), Very nice high 10-t speed Japanese press with fixed stroke of 15 mm, rates from 0 to 2500 strokes per minute Fgsdpfx Afeim Iv Dekjc

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, Bruderer roll feed, BBV 202/120, left-hand side, suitable for installation on BSTA 25/250 or BSTA 50/500 presses Feed length 0-120 mm Roller width 120 mm Strip inlet width max. 203 mm Strip thickness max. 6 mm Fgedpfx Aew S Hv Ijfkec Feed length adjustment motorized. Fully overhauled in 2025. Available for immediate delivery. Also in stock are other feeder models, such as BBV 190/85, BBV 195/85, BBV 205/120, BBV 320/200 etc. Please contact us for more information!

Condition: used, Year of construction: 1987, We are offering this used Donau DR 40-Z high-speed radial drilling machine, year of manufacture 1987. Manufacturer: Donau Fodpfxoy Dn E Nj Afkjgc Model: DR 40-Z Serial number: 1146-3 If you have any questions or require further information, please feel free to send us a message. The machine is located in Osterode/Harz. Viewing can be arranged by appointment. This is a used machine, therefore we sell under exclusion of any warranty.

Condition: used, Year of construction: 1976, arm length 1450 mm taper MK 4 Cube ja weight of the machine ca. 3 t Fedpfxjyn R N De Afksgc

Year of construction: 1985, condition: like new (used), Wanzke hydraulic high speed press SP/F12 double column press. -WKG 499- Offered here is a hydraulic high-speed press from the company Wanzke. This press is in mint condition! Fgodpfxjhgiwnj Afkoc There are 2 presses on one stand. Technical data: Manufacturer: Wanzke Type: SP/F 12 Pressing force: 120 KN Retracting force: 17,8 overrun time: 0,028 sec year of construction: 1985 Main drive: 1,5kW / 1,5kW Mains voltage: 380V 50Hz Control voltage: 220V 50Hz Overtravel: 2,8mm safety distance: 4mm Strokes/min: Working stroke: 10mm/sec. rapid traverse: 20mm/sec Max.stroke: 100mm Table area: 320 x 300 x 280mm Accessories: Double decoiler type GMD1 Digital function control "Tronic press" with full upgradeability to CNC control. There are 2 pieces in total!

Year of construction: 1985, condition: like new (used), Wanzke hydraulic high speed press SP/F12 -WKG 499- Offered here is a hydraulic high-speed press from the company Wanzke. This press is in mint condition! Technical data: Manufacturer: Wanzke Type: SP/F 12 Fedpfx Aehgiyijfkjgc pressing force: 120 KN retraction force: 17,8 overrun time: 0,028 sec year of construction: 1985 Main drive: 1,5kW / 1,5kW Mains voltage: 380V 50Hz Control voltage: 220V 50Hz Overtravel: 2,8mm safety distance: 4mm Accessories: decoiler GM1

Condition: used, Year of construction: 1997, Pressure total: 315 ton Ram stroke: 160 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 1.050 mm Free frontal opening L-R: 2.740 mm Free lateral opening F-B: 1.500 mm Distance between oil tray: 2.400 mm Table surface area : 2.740 x 1.800 mm Slide area: 2.400 x 1.700 mm Number of strokes: 10 - 60 s.p.m. Required power: 75,5 kW kW Working hours machine: 77.341 h Height over floor approx.: 5.500 mm Dimensions L x W x H: 5.400 x 3.300 x 5.700 mm Weight of machine approx.: 80 ton Control: Siemens S5 Standard configuration hydraulic tool clamping device Fgjdpfxovmfzho Afkec Extended machine accessories Tool changing cart

Condition: used, Press capacity: 50 ton Ram stroke adjustable: 16 - 51 mm Slide adjustment: 78 mm Shut height (stroke down, adjustment up): 300 mm Table surface area : 930 x 590 mm Number of strokes: 620 - 1.120 s.p.m. Required power: 40 kW Dimensions L x W x H: 3.900 x 1.400 x 3.065 Fedpfow Hg S Tox Afkogc Weight of machine approx.: 9 ton

Condition: used, Year of construction: 1982, machine/vehicle number: 105981, Press capacity: 45 ton Ram stroke adjustable: 20 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 300 mm Free frontal opening L-R: 710 mm Fgodpfxouqc Ngs Afkec Table surface area : 700 x 450 mm Slide area: 700 x 360 mm Hole in table: 600 x 100 mm Number of strokes: 80 - 400 s.p.m. Required power: 10 kW Height over floor approx.: 2900 mm Weight of machine approx.: 7,2 ton Control: Siemens S7 Standard configuration With gripper feedMachine was completely overhauled in 2001 with SIEMENS S7 control.