Used Bernardo Folding Machine for sale (67,455)

Condition: good (used), Year of construction: 1999, machine/vehicle number: 190454, Offer 25290 Technical specifications: - Max. working width: 3040 mm Hodpfxjw Sthdj Abkenu - Max. material thickness at 40 kg / mm² strength: 2 mm - Preselectable bending angle: 6 – 135° - Maximum opening / stroke of the upper beam: 250 mm - Height adjustment: - of the bending beam: 50 mm - of the lower beam: 50 mm - Upper beam drive: 400 V / 0.37 kW - Bending beam drive: 400 V / 0.75 kW - Manual backgauge - Segmented gooseneck bending rail - Space requirement approx. W 4000 x H 1400 x D 1200 mm - Weight approx.: 3500 kg

Condition: used, Year of construction: 1981, sheet width 1020 mm plate thickness 1,5 mm daylight opening max. 85 mm weight of the machine ca. 240 kg Smallest bending width factor 10 x sheet thickness s Smallest inner radius factor 1.5-2 x sheet thickness s Lowering capability of the lower and bending beams 20 mm Hsdpfx Aexbtrtobksnu On this swing-beam bending machine, the beams and side stands are reinforced with particularly strong ribbing. The cross-sections are designed to be strong enough to bend even narrow offsets. On the AML 1000 model, the bending beam is balanced by a gas pressure spring. The opening width of the upper beam and the lowerability of the lower and bending beams are generously dimensioned. The machine is being sold as defective because the connection between the lower frame and the right side stand is broken (see photo taken from behind)!

Condition: good (used), Year of construction: 2000, functionality: fully functional, 4 pockets Hedpfxjxbpvuo Abksnu with MBO SBAP 46 ME, vertical stacker delivery

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, STC-Ref: G-062-4939 Hedpfx Aboz Rw Uvjkenu Stahl Ti-52/4-KBK-Fi-52, Year: 2000 equipped: - Tri Creaser - Paper weights: 40–250 g/m² - Knife folding unit KBK 52, 1 knife/Messer - working width max. 520 mm - folding length min. 4 cm - Output max.45.000 strokes/hr. - 1st folding unit: 4 buckle plates - noise hoods - shingle delivery - cross fold unit - perforating device - Max. format: 520 × 840 mm - Min. format: 100 × 150 mm - flat pile feeder Fi-52 --> available: 12/2026

Condition: excellent (used), Working width 1010 mm Max. sheet thickness 370 N/mm² 1.5 mm Upper beam opening 80 mm Small bending width 10 x s mm Small Inner radius 1.5-2 x s mm Bending beam adjustment approx. 40 mm Max. bending angle 130° Dimensions L x W x H 1650 x 500 x 1400 mm Weight 380 kg Accessories / Special Features: • Upper tool, 45° bending rail • Flat rail on the bending beam • Graduation with stop • Compensating counterweight • Heavy-duty cast iron construction • Easy adjustment of the upper beam via spindle • Versatile • The bending tools are suitable for narrow and wide sheet metal for fine bending • Angle adjustment with graduation • Easy bending thanks to counterweight Hnodpfjwg Ru Ejx Abkou Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2007, Bundle delivery system Palamides alpha 700 Maximum feed-in size: 800 x 330 mm Stack height: 16 cm Hnsdpfey N Un Usx Abkou Triple stream Automatic format adjustment in running direction

Condition: excellent (used), Offer includes: Ti52 with 6 pockets, 2nd station with 4 pockets, Tremat feeder, very good condition, year of manufacture 2009, including SAK-52 stacking device, VFZ52 available as an option. Hnodpfezmp Nrox Abkju

Year of construction: 2006, condition: ready for operation (used), Two Heidelberg folding systems are available. 1) Stahlfolder Heidelberg 56 system, year of manufacture: 2006, flat pile feeder: FFH-56, min. sheet dimensions X/Y: 140mm/1800mm, max. sheet dimensions X/Y: 560mm/900mm, paper weight range: 40g-250g/m², max. stack height: 800mm, max. throughput capacity: approx. 200m/min, buckle plate station: BUH-56, working width: 560mm, folding roller diameter: 44mm. 2) Stahlfolder Heidelberg 66 system, year of manufacture: 2006, min. sheet dimensions X/Y: 140mm/180mm, max. sheet dimensions X/Y: 660mm/1040mm, paper weight range: 40g-250g/m², max. stack height: 1200mm, throughput capacity: approx. 200m/min, working width: 660mm, folding roller diameter: 44mm. Documentation available. On-site inspection is possible. Hsdpfx Abeyddzxekenu

Condition: new, Year of construction: 2023, neu 2023 8286 prompt, Zwischenverkauf v Türkei 2990 € 1 2040 mm 0.8 mm 70 ° 2400 mm Hsdpjynmxbefx Abkonu 750 mm 850 mm 290 kg straight upper tool moveable manual cutting device

Condition: ready for operation (used), Year of construction: 2003, sheet width 2520 mm plate thickness 2.50 mm ST thickness at "Niro-steel" 1.50 mm upper clamping bar adjustment 160 mm adjustment speed 100 mm/sec Adjustment folding beam 80.0 mm Bending speed ca. 120 Grad/sec compressed air 6.0 bar work height max. 869 mm control POS 2000 total power requirement 7.2 kW voltage 400 V weight 3430 kg Current new price ~ 100.000 euros Hodpfx Aoxbh Euobkenu From a maintenance workshop With very good equipment (!!) Equipment: - CNC electric motor-driven universal swivel bending machine * High-precision mechanics with modern control technology * For individual and series production * Robust high-speed machine with high axis speeds * Torsion-free welded construction - Rotatable upper beam / as automatic tool change system * With 2x tool stations (sharp and goose foot bending rail) * Reduces set-up and idle times * Eliminates time-consuming tool changes and adjustments - SCHRÖDER CNC control model POS 2000 * Control panel at front right (operable with PC mouse) * Color display * USB interface * Automatic cutting calculation * Material and tool library * Dimensionally accurate bending simulation * Windows XP operating system * Swivel control, front right - Servo converter-controlled drives * for bending/upper beam & electric backgauge - CNC motorized lower beam adjustment - CNC electric motorized backgauge * Travel speed 300 mm/sec. - with rear sheet metal support surface, including ball rollers - 1x freely movable double foot switch - Operating instructions (PDF)

Condition: used, Year of construction: 1983, sheet width 2540 mm Hnedpfew H Dkaox Abksu plate thickness 2 mm distance between columns 2600 mm min. cut-off length 5 x s mm adjustment of lower beam 80 mm adjustment of upper beam 80 mm daylight opening 350 mm total power requirement 4 kW dimensions 4 x 1 x 1,5 m With accessories.

Condition: ready for operation (used), Year of construction: 1999, sheet width 3200 mm plate thickness 4.0 mm ST distance between columns 3300 mm upper clamping bar adjustment 400 mm Adjustment folding beam 80.0 mm pivoting angle 180 Grad clamping capacity max. 200 KN rear stop 10.0 - 1600 mm oil volume 160 Liter total power requirement 9.8 kW weight 8500 kg range L-W-H ~ 4900 x 2000 x 2300 mm from a maintenance workshop good / well-maintained condition (!!) - inspected condition - machine video - ?v=RY-amZooeX4 Equipment: - robust CNC folding machine - CNC control unit - CYBELEC "DNC 80 PP" * swiveling control panel, front right * 2D graphic display for visualization and multi-simulation * 2D graphic programming * easy operation - CNC motorized backgauge * travel range 10.0 - 1,600 mm * pneumatic / retractable gauge fingers * adjustment speed max. 250 mm/sec. * rear sheet support table with brushes - motorized lower beam adjustment (S-axis) - electro-hydraulic folding movement of the lower beam - pneumatic upper tool clamping - pneumatic lower tool clamping - 1x mobile dual foot pedal - original operating manual + electrical/hydraulic schematics Special accessories included: - 1x segmented set of goat-foot upper tools, H = 150 mm - 1x segmented set of goat-foot upper tools, H = 200 mm - 1x standard sharp-nosed rail (installed) Hedjxaa A Njpfx Abkjnu - 1x segmented set of bending/lower tools (installed) - rear sheet support with brushes

Condition: used, Year of construction: 2005, Folding machine MBO K 800.2/4 SKTL MWK Year: 2005 Description: - 16 page folder - MBO Navigator Feeder - Pallet feeder - Excluding pump Folding unit MBO K 800.2/4 SKTL MWK - Parallel fold unit with 4 buckle plates - Perforating shaft - First cross fold - Buckle fold underneath first cross fold Hjdstczixspfx Abksnu - Second cross fold to the left - Second cross fold to the left and right - Noise hood over the entire folding section - Excluding delivery

Condition: used, Year of construction: 2003, Single-sided edge trimming and gluing machine Manufacturer: IMA Type: AVM/K/I/G80/822/S3R3L20 Year of manufacture: 2003 For milling, edge gluing, and finishing for a standard groove - only for pre-shaped/pre-grooved doors and square-edged doors Left-hand machine (fixed stop on the left). Complete processing in 3 passes 1st pass: Processing of the top surface of the door (transverse processing) 2nd pass: Door long edge 3rd pass: Door long edge During the 2nd and 3rd passes, the protruding transverse edge from the 1st pass is milled off by using a co-rotating/counter-rotating milling process. Double groove gluing is only possible through modifications to the machine and subsequent manual finishing of the edge. Max. door thickness: - Straight edge: approx. 70 mm - Groove gluing: approx. 60 mm Stable machine frame as a support for aggregates and housing for electrical installation. Drive for feed speeds of approx. 5-25 m/min., mechanically infinitely adjustable. (not to be confused with processing speed) Hjdjzuykvepfx Abksnu Continuous, plastic-coated strip-type conveyor chain, approx. 80 mm wide, with automatic central lubrication. Manually height-adjustable top pressure with a V-belt 80 mm wide and spring-loaded, ball-bearing guide rollers. Machine length approx. 10,900 mm Infeed table at the machine inlet. 1 horizontal, manually adjustable, unheated stop bar 1 joiner milling unit controllable, not swiveling, without sensing with 2 motors, each 3 kW Gluing unit for optional operation of straight edge or softforming gluing, by changing the glue application. Edge material: - Strips: up to 1.3 mm - Roll material: 0.4-3 mm - Solid wood strips: 6 mm Strip length max.: 2550 mm Strip height: 14-80 mm (depending on glue application) with: - Side adjustment by hand for the pneumatically controlled glue application. - Height adjustment by hand -15mm downwards and up to +10mm upwards. 1 bell for the main pressure roller, manually adjustable 1 glue application 0.8L, max. edge height 70mm, straight edge with pneumatic quick-release, Chem-Coat coated, electronic temperature control 1 hot melt glue application 0.8L with quick-release, up to max. 80 mm high edge material, soft edge, Chem-Coat coated, with temperature control and control unit for the strip coating 1 automatic Quickmelt hot melt glue feeder with a heating power of 5.0 kW 1 2-fold magazine only for edge material up to 3.0 mm thick, can be manually attached to the single-roll magazine 1 groove forming pressing unit for pressing the edge material into the groove with: - an activation unit 15 kW for re-activating the edge material for groove forming - a pneumatically controlled forming shoe for the underlapping edge - a pneumatically controlled forming shoe for the entire groove - additional post-pressing rollers for the edge areas in the groove - an electro-pneumatic lateral retraction device for the entire pressing unit 1 horizontal adjustment with mechanical digital display 1 trimming unit for 2 motors mounted on the top pressure for trimming the front and rear edge/strip overhang, for trimming cuts flush or with a bevel. 1 milling unit for 2 motors with height sensing, side sensing, for pre-milling from below and above with 2 motors 1kW, 400V, 200Hz, 12,000 RPM, 30° swiveling 1 milling unit for 2 motors with height sensing, side sensing, for fine milling from below and above with 2 motors 660W, 400V, 200Hz, 12,000 RPM, 30° swiveling Note: The technical data and descriptions are copies of the original order

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1024, Size min L 90 x W 75mm, max L 330 x W 160mm, maximum pile height: 150 mm, Max 1200 piles per hour Hnodjvmxtwepfx Abkeu Machine no: 1024

Condition: good (used), Year of construction: 2001, MB Baeuerle Multipli CAS-524 flat pile feeder Hjdpfx Aboh Ighhoksnu 4 buckle plates noise reduction hoods delivery conveyor belt

Condition: new, Year of construction: 2026, neu 2026 080200 prompt, Zwischenverkauf v Türkei 6550 € 126.42 € 1 1250 mm 1.25 mm 0.8 mm 2 mm 150 ° 500 mm 200 mm Hnsdswirc Ajpfx Abkou 1500 mm 750 mm 1715 mm 315 kg geteilt, 45° Verstellbereich 35 mm Sectioned upper- lower- and bending tool, material 42CrMo4, hardened to 60HRC Manual back gauge Adjustable angle gauge Shelve and box for tools Machine on rolls with brakes Operating manual in German or English

Condition: good (used), Technical data: Working length: 6050 mm Bending capacity: 2.0 mm NC control Sheet metal cutting device: rotary shear Upper beam opening: 250 mm Motor power: 9 kW Dimensions (Length x Width x Height): approx. 7200 x 1800 x 1750 mm Weight: approx. 5 t Hsdpfx Asxyau Ejbkjnu The seller is not liable for typographical or data transmission errors. The machine is in condition commensurate with its age regarding appearance, technology, and wear; used machines are sold without any warranty.

Condition: used, Falzmaschine / Folding machine  Heidelberg Stahlfolder  Ti52/4 --Neue Falzwalzen / new folding rollers-- Baujahr / Year 2003 - Serial-No. F.00235 Flachstapelanleger / Flat Pile Feeder Arbeitsbreite max. 520mm / Working width max. 520mm 1. Station 4 Taschen / 1. Folding Unit 4 Buckles Schuppenauslage / Stream delivery Stahl SAK Inklusive Handbücher / Included Manuals Hnjdpfxexu Ufuj Abkeu Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, 16 pages buckle Folding machine Heidelberg Stahlfolder TD94/6-4 Falzmaschine / Folding machine Heidelberg TD-94/4-4-2 Baujahr / Year 2001 - Serial-No. 701544 Rundstapelanleger / Round Pile Feeder  Arbeitsbreite / Working width max. 940mm Falztyp / Folding Type 4 - 4 - 2 buckles Schuppenauslage / Stream delivery Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Hnjdpex Ur Rksfx Abksu On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, sheet width 3200 mm plate thickness 2,5 mm weight of the machine ca. 3,5 t Hsdpfxsr Ngtfs Abkjnu Tools recentely grounded. Bending angle preselection via potentiometer

Condition: good (used), Year of construction: 2001, functionality: fully functional, Equipment: compressor, Machine complete with MBO SAP 46 L delivery (Z 2 mobile blade also available) Hjdpfx Abewmv Udoksnu

Condition: used, Year of construction: 1982, Technical details: sheet width: 1500 mm plate thickness: 1,5 mm distance between columns: 1760 mm knife length: 152 mm bending angle max.: 160 ° total power requirement: 1,3 kW Weight approx.: ca. 800 kg dimension machine approx.LxWxH: 2,5x0,7x1,5 m - adjustment of the upper cheek 350mm - adjustment of the bending cheek / lower cheek 60/60 motoric - bending edge up to max. 10mm radius - without back gauge - upgrade possible -manual counter - foot pedal (pedal left/right) accessories: - 1 set tools Hjdpfxsu Ibzwj Abkenu *

Condition: excellent (used), Year of construction: 1997, machine/vehicle number: 97651504, WITH STAND Hnsdpfx Ajy Hi Abebkju Format (mm): max. 297 x 420 // min. 105 x 148 Pockets: 2 Folding arts : Letter fold, zigzag fold, double parallel, single fold

Condition: used, Year of construction: 2009, Folding machine MBO Navigator K800.2/6 S-KTL Year: 2009 Description: - 16 page folder - Pallet feeder: FP 120 - Pump: Year 2018 Folding unit MBO K800.2/6 S-KTL - Parallel fold unit with 6 buckle plates - Slitter shaft cassette - First cross fold - Buckle fold underneath first cross fold - Second cross fold to the left - Noise hoods for upper folding buckles - Excluding delivery Hsdpfx Abexg Nlmjkjnu Max. mechanical speed: 10 - 180 m/min Maximum size: 780 x 1200 mm Minimum size: 170 x 250 mm