Used Bending Cell Robocone Rc9 for sale (4,202)

Condition: excellent (used), Year of construction: 2008, control type: CNC control, controller manufacturer: ESA TOUCH PANEL, pipe length (max.): 4,000 mm, bending radius (max.): 180 mm, bending radius (min.): 10 mm, overall weight: 3,700 kg, total length: 6,000 mm, total width: 1,800 mm, total height: 1,800 mm, Tube bending machine Transfluid - DB630 A3 CNC MACH-ID 9616 Make: Transfluid Type: DB630 A3 CNC Control: ESA TOUCH PANEL Year: 2008 Max.Tube Ø: 30mm Min. Tube Ø: 4mm Max. Wall thickness:4mm Max. Bending radius:180mm Min. Bending radius:10mm Max. bending length:4000mm 3e dimsion bending:Yesmm/min. Number of tools: 10,12,15,16,18,20,22,28 Length: 6000mm Width: 1800mm Height: 1800mm Crsdpfx Aey N Rv Ioaxod Weight: 3700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1995, roller (top) diameter: 330 mm, sheet thickness (max.): 23 mm, Manufacturer: IMCAR Type: SIHR Year of manufacture: 1995 Extended end for profile bending rolls (Pipe & T-Angle) Central lubrication Digital readout position side rolls Fully hydraulic machine Crjdjwpku Dspfx Aaxed Hydraulic drop end Hardened rolls Specifications Metric US Standard Roll width: 3100 mm Sheet thickness at 3 x top roll Ø: 18 mm Sheet thickness at 5 x top roll Ø: 23 mm Sheet thickness for initial bending: 20 mm Top roll Ø: 330 mm Side roll Ø: 310 mm Number of rolls: 3 Bending speed: 0 - 5 Side roll adjustment: 200 mm/min. Number of driven rolls: 2 Power: 15 kW Dimensions (estimated) Length: 5250 mm Width: 1700 mm Height: 1700 mm Weight: 11900 kg Please note: The information on this page has been provided to the best of our knowledge, and wherever possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend you check all critical details.

Condition: good (used), Manufacturer: Tracto Technik Type: TUBOMAT Year of construction: 1996 Pipe bending machine with electric control, 4-fold bending angle pre-selection and digital display Hydraulic bending drive operated by hand lever valve Hydraulic bending drive, operated by hand lever valve Follower-type pressure die (sliding guide) Hydraulic mandrel retraction Pipe circular saw with coolant lubrication and automatic feed Pipe deburring unit for internal and external deburring Hydraulic power unit as basic seating for attaching a cutting ring assembly or flaring device Machine mobile and flexible to use Specifications Metric US Standard Max. Product Ø 42 mm Min. product Ø 6 mm Max. Wall thickness 3 mm Max. Bending radius 5 mm Min. bending radius 180 mm Max. Bending length 2000 mm Deburring device Yes Sage device Yes Flanging device Yes Dimensions (estimate) Csdpfx Aet Dk Ukjaxsrd Length 3500 mm width 1000 mm height 1200 mm weight 1000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, pipe diameter (max.): 42 mm, pipe length (max.): 3,000 mm, bending radius (max.): 180 mm, wall thickness: 3 mm, Pipe bending machine with electric control, 4-fold bending angle pre-selection and digital display  Hydraulic bending drive operated by hand lever valve Hydraulic bending drive, operated by hand lever valve Follower-type pressure die (sliding guide) Hydraulic mandrel retraction Pipe circular saw with coolant lubrication and automatic feed 6 mandrels up to 24 mm included x 3000 mm Pipe deburring unit for internal and external deburring Hydraulic power unit as basic seating for attaching a cutting ring assembly or flaring device  Machine mobile and flexible to use Credpfx Asuccw Hoaxjd Max. tube Ø: 42mm Min. tube Ø: 6mm Max. Wall thickness: 3mm Max. Bending radius:5mm Min. bending radius:180mm Max. bending length:3000mm Deburring attachment:Yes Sawing attachment: Yes Flair attachment: Yes Length: 3500mm Width: 1000mm Height: 1200mm Weight: 1000kg

Condition: good (used), Year of construction: 2022, Adjustable stroke with digital read out positioning display Variable adjustable pressure Quick change tool system Table length: 1250 mm Table width: 660 mm Max. working pressure: 30 tons Crodpswrzmvjfx Aaxod Max. stroke: 235 mm Max. workpiece weight: 250 mm Stroke adjustable: 0 - 235 mm Working speed: 10,000 mm/min Return speed: 20,000 mm/min Power: 3 kW Flat capacity: 200 x 24mm x mm Tube capacity: 60 x 4Ø x mm Solid capacity: 40 x 40mm Length: 1250 mm Width: 700 mm Height: 1200 mm Weight: 1050 kg

Condition: good (used), Year of construction: 2018, Manufacturer: INDUCTAFLEX Type: AL-3e Control system: ACCURATE touch screen Year of construction: 2018 3 rolls driven servo Torq each roller 3500 nM Electrically support rolls Intelligent software : Ellipse program Crsdpfx Aajvd Dftoxjd U Bend shapes control of tangents Auto section detector Specifications Metric US Standard Horizontal and Vertical Horizontal Axis Ø 105 mm Number of rollers 3 Stroke X axis 0 - 400 mm Dimensions (estimate) length 4500 mm width 3200 mm height 2700 mm weight 3300 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Year of construction: 2005, condition: used, Tube bending machine. Crjdpfxszdb H Es Aaxsd

Condition: good (used), Year of construction: 1988, Press brake, bending machine, swing bending machine, die bending machine -Handover: in its current condition as inspected -Function: Manual operation (no automatic operation) -Manufacturer: RAFAMET Swivel bending machine type KM-4 -Drive: mechanical -Max. working width: 2020 mm -Max. sheet thickness: 4 mm -Stop depth: 750 mm -Connected power: kW -Dimensions: 3350/1540/H1510 mm Crodpfsv Tpxqsx Aaxjd -Weight: 3900 kg

Condition: new, Year of construction: 2026, Bending machine ZB 70/3 H NC Zopf - semiautomatic - with foot pedal - with standard roller set TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface Credpfx Asfkz Rbsaxsd - hydraulic adjusting of the center roller - working position horizontal and vertical - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 40 mm - roller diameter: 152/162 mm - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,1 kW - motor for hydraulic: 1,1 kW - hydraulic pressure: 8 to - adjusting way: 120 mm - weight: 490 kg - dimensions: - colour RAL5012 / RAL7015 NC-CONTROL for ZB 70/3 HA: - two axes controlled - touch screen - memorise of 1000 programs ech 19 steps - interpolation - accuracy of the y-axes 1/10 mm - programmable forward and backward

Year of construction: 2024, condition: as good as new (ex-display), Stierli bending machine 120HE Horizontal bending machine, with bending force of 12 tons tool height 130 mm stroke 0-170 mm bending capacity for flat steel 130x12 mm pipe bending for steel pipes up to 1 1/2" capable of performing minor straightening operations demonstration machine, year of manufacture 2024 Csdsid Izgepfx Aaxerd

Condition: new, Year of construction: 2025, Hydraulic horizontal bending and straightening press - Fabrikat Zopf - Model T 800 - Multiprogramming of 99 programs each 16 steps - hydraulic pressure 80 to. - length of stroke 300 mm - bending speed adjustable Crjdpfod A Nc Djx Aaxsd - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 300 mm - motorcapacity 7,5 KW - 400 V 50 hz 3 ph. - working height 940 mm - closed table - replaceable wear plate - weight 2100 kg - bending capacity: flat material max. 300x32 mm at Vmax round tube 3/8" - 3" gas pipe

Year of construction: 1996, condition: excellent (used), machine/vehicle number: 121, Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Crodpfx Ash Eib Eoaxjd

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: 6513/19, Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Crodpfx Aswu Sg Ejaxod

Year of construction: 2020, condition: as good as new (ex-display), Roll bending machine with spindle feed and 3 driven rollers. Features: Shaft diameter: 40 mm Cedpfx Ajgi N Aloaxerd Working position: Horizontal/Vertical with support Connection: 230V/1 phase with inverter Dimensions (W x H x D): 700 x 1460 x 600 mm Weight: 180 kg Performance: Round tube: 70 x 1.5 mm Square tube: 50 x 50 x 3 mm Round bar: 35 mm Flat bar: 50 x 10 mm Angle iron: 50 x 50 x 6 mm Scope of delivery: CE40M3D Universal roll set for profiles Accessories (including control panel with foot control, operating manual) 1 set of plastic rollers for round tubes, 1 1/2" for work with reduced marking.

Year of construction: 2024, condition: as good as new (ex-display), Stierli bending machine 420HE Horizontal bending machine, with bending force of 42 tons tool height of 200 mm stroke of 0-310 mm, stepless bending capacity of 200x24 mm St40 straightening capacity for HEB180 Bending and straightening program via selector switch Exhibition machine, year of manufacture 2024, incl. hand-held control and foot pedal Wear-resistant machine table Codpfxsid Izks Aaxord Machine in new condition

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Crodpfjh U Rzgex Aaxjd Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 2 mm steel Crjdpfx Asq T Ud Sjaxsd Oberwange swivelable Bending angle adjustable via potentiometer Lift height preselectable via scale Manual and automatic bending mode possible Weight: approx. 650 kg

Condition: new, Fully automated system Energy saving Industry 4.0 Durma Cloud Fiber laser technology Environmental awareness Synchronous, minimal working area Crodpfx Ajg Adn Ieaxsd High, precise repeatability High process accuracy Compact design Low noise level Simple and fast installation Upon request, we will send you informational material.

Condition: new, Year of construction: 2024, PB 4 Bending Center With the Durma Bending Center, you will achieve error-free results with maximum speed and safety, fully automatic tool change, and minimal setup time. The Durma Bending Center, with its robust machine body, excellent precision, ergonomic design, and diverse bending functions, will occupy an important place in your operation. The combinations we can technically implement in punching and laser machines enable maximum time savings in your production processes. Our developed smart consumption, standard production independent of the operator, and Durma CNC Bending Center, which is manufactured after stable thermal conditioning, offer you the opportunity to generate profits against rising energy costs. The Durma Bending Center automatically performs simple and complex bending operations on sheet metal materials with a thickness between 0.5 and 4 mm. With its user-friendly, easy-to-operate interface and software that simplifies part programming, this product will be your solution partner. Technical Data: Csdpog Adi Rsfx Aaxsrd Maximum bending length: 2800 mm Minimum bending length: 350 mm Maximum sheet metal input length: 3050 mm Maximum sheet metal input width: 1524 mm Minimum bendable width: 150 mm Maximum bending height: 254 mm Maximum bending depth: 50 mm Maximum sheet metal rotation radius: 3300 mm Bending force: 500 KN Pressing force: 1000 KN Maximum sheet metal thickness: For Fe 410 N/mm2 material: 3.2 mm For Acc. Inox 600 N/mm2 material: 2.2 mm For Aluminum 260 N/mm2 material: 4 mm Minimum sheet metal thickness: 0.5 mm Maximum bending angle per stroke: ±135° Extended Functions: Negative bending capability on the last bend: Standard Automatic tool change option: ATS (Standard) Auxiliary clamping tools: Standard Lower auxiliary bending tools: AHD (Option) Upper auxiliary bending tools: AB (Option) Reversed bending arrangement: AB (Option)

Condition: used, functionality: fully functional, Hydraulic mandrel tube bending machine Complete bending sets with bending mandrels and bending shoes: Ø 18, 20, 22, 25, 2 x 30 + 35 mm Codpfxswnrt Sj Aaxjrd Additional bending mandrels without bending shoes: Ø 28, 2 x 38 + 42 mm Pre-assembly device with hydraulic cylinder Hydraulically driven deburring unit for tubes, inside and outside, from 6 - 48.3 mm Max. tube feed length: 3000 mm Machine weight: approx. 700 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: used, WT-2000PV, µ-PCD, Semilab measuring device for solar cell production Csdpfxjpvkt Sj Aaxerd Model: WT-2000PV Type: µ-PCD Condition: Used

Condition: used, Year of construction: 2018, functionality: fully functional, roll width: 500 mm, total width: 850 mm, total height: 160 mm, total length: 2,000 mm, Manufacturer: Heber Year of manufacture: 2018 Overall dimensions (L x W x H) in mm: 2,000 x 850 x 160 Width including side rail in mm: 600 Side rail height in mm: 140 Conveyor width in mm: 500 Conveyor height in mm: 150 Curve (degrees): 90 Curve radius, inner in mm: 800 Curve radius, outer in mm: 1,200 Direction of travel: possible in both directions Support roller shaft type: steel, internal thread Support roller diameter: 50–80 mm Support rollers per shaft: 1 Support roller material: steel – plastic-coated Roller pitch, internal (mm): 70 Roller pitch, external (mm): 120 Drive: motorised roller Motor manufacturer: Interroll Motor specifications: 24 VDC / EC310 Conveyor speed in m/s: 0.6 Net weight in kg: 60 Special features: one drive roller Cjdpfxozd A Uvo Aaxjrd Condition: used / fully functional Functional test: OK

Condition: new, Year of construction: 2026, New! Magnets for positioning the sheets are integrated into the bending jaw. We have the machine in stock in Halver! Free delivery within 150 km. SERVICE CENTER HALVER FOR BENDING TECHNOLOGY. YOUR competent partner for BENDING MACHINES. We can demonstrate the machines upon request, along with expert advice and professional training. We will advise you individually – according to your needs – and look forward to your inquiry. The ZGR2000/0.8 bending machine from Prod-Masz is available to try out on-site and take away immediately. Cjdpfx Aozbm Ayeaxsrd Sheet clamping on this swing bending machine is also done via hand levers. Technical specifications: - Working width: 2140 mm - Sheet thickness: Steel up to 0.8 mm - Non-ferrous metals: 30% thicker sheet - Bending angle: up to 145° - Bending jaw: 15 mm - Clearance: 80 mm - Degree scale - Stop for preset bending angles - Sheet support - Front depth stop - Weight: approx. 175 kg Other dimensions (1000, 1440, 2140, 2640, 3140, 3640, 4140 mm) available upon request Accessories: Roller shear €350 All prices are subject to 19% VAT. CE certified Warranty: 12 months Collection is possible Shipping within Germany: €180

Condition: new, Year of construction: 2026, Free delivery up to 150 km. Folding bench 2m incl. transport rollers "RED 160 degrees" from the company Prod-Masz to try on site and to take away. Crodpfszbmx Uex Aaxed You will receive professional instruction on site. Technical data: - including cut-outs in the beams - Working length: 2060 mm - Bending capacity: up to 0.6 mm - Bending angle: max 160 degrees - Bending beam thickness: 15 mm - Upper beam stroke: 80 mm - Weight: about 180 kg - Lifting of the upper beam in three positions Furnishing: - degree scale - angle stop - rear frame - front depth stops -Certificate CE -12 months warranty Accessories - roller scissors (up to 0.8mm) 350EUR Shipping within Germany 180 EUR All prices are plus 19% VAT Self pickup

Condition: used, functionality: fully functional, Year of construction: 2004, machine/vehicle number: 265040200001, Technical specifications available upon request. Codpjzd Hhmjfx Aaxerd